08b0456d91
Merge pull request #7379 from thinkyhead/bf_manual_bed_level_floor
...
Manual Bed Leveling: Goto previous Z height at each probe point
8 years ago
936d00dda8
Implement probing delay for piezo sensors
8 years ago
29eef360d0
Merge pull request #7308 from thinkyhead/bf_cleanup_config_adv
...
Fixes for FWRETRACT
8 years ago
894608f8a3
Manual Bed Leveling: Goto previous Z height at each probe point
8 years ago
ff06e1a030
Merge pull request #7372 from tcm0116/delta_calib_menu
...
Move Delta Calibration menu to the Prepare menu
8 years ago
15e009b6ca
Move Delta Calibration menu to the Prepare menu
8 years ago
bfd396c13a
Patch to fix some compiler warnings
8 years ago
48c5f3dddf
Tweak kill action #ifdef
8 years ago
be7a9a07c5
Don't reset grid with `G29 Q` + PROBE_MANUALLY
8 years ago
dfe670247d
Merge pull request #7363 from marcio-ao/bugfix-1.1.x
...
Makefile fixes and U8G support.
8 years ago
af83c512b8
Added support for U8G.
8 years ago
4eff18854b
Rename options with swap_ prefix
8 years ago
14482d2f2a
Strip auto-retract for impossible M(IN|AX)_AUTORETRACT combo
8 years ago
9fc72422e4
Don't let the flow multiplier affect retract/recover length
8 years ago
fee696db5d
Improve retract() for G10/G11/autoretract
8 years ago
423b0f3a1e
Replace MIN_RETRACT with MIN_AUTORETRACT, MAX_AUTORETRACT
8 years ago
51864fd365
Add bed size as a configuration option
8 years ago
dc7c95e07b
Remove `@ section fwretract`
8 years ago
4718c09c48
Remove extraneous USBCON defines for AT90USB boards
...
USBCON is definied by serial.h pullikng in MarlinConfig.h which in turn pulls in Arduino.h. Defining in later includes has shown to cause compile issues so removing all extraneous calls for and potentially easier future linker troubleshooting.
more USBCON unification
8 years ago
890e7a16a9
Add support for Printrbot Neopixel RGBW strip.
...
Connected as described at http://printrbot.com/shop/led-strip/
Based on patch by Kelly Anderson <kelly@xilka.com> at
http://www.xilka.com/printrbot/marlin/1.1.4/20170707/
8 years ago
a059e95463
Bring Infitary i3 config up to date
8 years ago
d6d6043548
Merge pull request #7338 from thinkyhead/bf_mks_ps_on_pin
...
MKS 1.3+: Add pin mapping for PS_ON
8 years ago
851f9f5399
Update Russian translation - Part 1
...
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
8 years ago
b7a16e4468
Merge pull request #7315 from fixoid/patch-1
...
Fixing SWITCHING_EXTRUDER feature to work with HOTENDS > 1
8 years ago
f38b8c5bf8
MKS 1.3+: Add pin mapping for PS_ON
...
This allows the use of D4 as PS_ON since MKS Gen doesn't have a PS_ON pin. However this effectively allows only 3 servos (instead of 4).
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
8 years ago
8a3bc6be4d
Improve FWRETRACT config options and commentary
...
Add more details as requested in #7198
8 years ago
b0173ccdb9
Drop extra initializers for vars initialized by EEPROM code
8 years ago
7afafb05b8
Split G10/G11 into separate functions
8 years ago
c45798694f
Add some more requirements to the G-code list
8 years ago
72de280c1e
BARICUDA valve pressure consistently uint8_t
8 years ago
4d98e3f0a7
General cleanup
8 years ago
e530c67349
Fixing SWITCHING_EXTRUDER feature
8 years ago
2ad3ca5d8a
Bugfix ( #7310 )
8 years ago
37a6833d7e
Allow the sampled point to be added into the Least Squares Best Fit ( #7289 )
...
Without this... The LSF won't work because none of the sampled points
in this code block get added.
8 years ago
a519b093b9
Fix build by replacing qr_solve by least_squares_fit. ( #7285 )
...
This was broken by 9af67e2446
8 years ago
0873c667fa
Apply coding standards to recent merges
8 years ago
8c2907d10f
Fix ABL broken by recent change
8 years ago
9af67e2446
Save 7714 bytes of program memory when doing AUTO_BED_LEVELING_LINEAR ( #7276 )
...
We can save more and a pile of RAM by eleminating the eqnBVector and
EqnAMatrix arrays next.
8 years ago
76e90b93b7
Volatile keyword not needed for parser.seen
8 years ago
00e4ced58e
Stay in User Menu after command. Add feedback.
...
When a user executes a User Menu command, the LCD returns to the main menu. If the user has multiple menu items they want to run, such as one menu item per bed leveling corner, then it's better to stay in the User Menu rather than return to the main menu.
This PR modifies Marlin to stay in the User Menu after a command.
8 years ago
1066b17457
Merge pull request #7260 from thinkyhead/bf_G33_update_27
...
Updates to G33 and its LCD code
8 years ago
e927941c06
Bugfix ( #7265 )
...
Fix compile error when UBL is enabled but there is no LCD Panel.
8 years ago
68aea9c01d
Merge pull request #7261 from thinkyhead/bf_configs_by_vendor
...
Arrange more example configs by vendor
8 years ago
aaacef9441
Corrections ( #7231 )
...
20x4 map integration. Also some minor changes to the UBL Menu layout. Both 20x4 LCD's and Graphical LCD panels should have similar functionality now.
8 years ago
4bc79ec877
Updates for G33-LCD interface
8 years ago
186580b55f
Arrange example configurations by vendor
8 years ago
6be369f3ea
Add some config names to AUTHOR
8 years ago
7fc31a7940
Merge pull request #7258 from thinkyhead/bf_cleanups_jbrazio
...
Add support for BQ heated bed kit with Hephestos 2
8 years ago
11e376e920
Merge pull request #7256 from thinkyhead/bf_cleanup_july_6
...
Assign -1 to LCD_PINS_D4-7 if not defined
8 years ago
2065591daf
Add support for BQ heated bed kit with Hephestos 2
8 years ago
61be28133d
Support for Creality CR-10
...
Creality board is a Melzi / Sanguinololu variant, but using different pins for LCD control (and maybe other minor variations)
8 years ago
9248a90a4c
Assign -1 to LCD_PINS_D4-7 if not defined
8 years ago
5ef1e5ef60
Tweaks for M43
8 years ago
c7732db99d
Fix: Use of digitalRead, digitalWrite breaks on AT90USB
8 years ago
f713f25fa5
Clean up excess whitespace
8 years ago
fc9ce65095
Add `BUSY_WHILE_HEATING` for hosts that need it
8 years ago
c6d430670a
Clear SHOW_BOOTSCREEN with no LCD
8 years ago
11c589c3ec
Fix compile issue with G38
...
Fixes #7250
8 years ago
678914be25
Patch M23 to work around Simplify3D bug
...
Addressing #7227
8 years ago
3efe4aeef8
Add PROBE_MANUALLY support to G33
8 years ago
cca1cca3a5
Merge pull request #7237 from thinkyhead/bf_cz_mapper
...
UTF-8 mapper for Czech
8 years ago
a2babb532d
Merge pull request #7217 from benlye/add-kill-action
...
Add configurable action command to send when printer is killed
8 years ago
8c34233452
UTF-8 mapper for Czech
8 years ago
20f6676d63
DISABLE_[XYZ] compatibility check
...
DISABLE_[XYZ] is incompatible with HOME_AFTER_DEACTIVATE and Z_SAFE_HOMING
8 years ago
c28749a567
Add kill action
...
Sends pre-defined string as action command when printer is kill.
8 years ago
df87278fce
Add "CAP:PRINT_JOB:1" (M75 / M76 / M77) to M115 output
8 years ago
4be8d7720e
Fix spelling of "Chinese"
8 years ago
567941e341
Fix for issues #6997 and #7152
...
Probing with the effector in the printing area, but an eccentric probe (e.g. allen key) outside it but still touching the bed gives meaninfull information for calibration. Since calibration is most accurate when probing as close to the towers as possible the testing was way to restrictive hence this fix.
8 years ago
57fff2e95e
Merge pull request #7219 from thinkyhead/bf_update_git_scripts
...
Update Marlin+git helper scripts
8 years ago
6a3967ee33
Corrections for probe_pt parameters
8 years ago
534bffa7a9
Correct comment on ABL G29
8 years ago
e1e1a0c344
Provide a default CUSTOM_BOOTSCREEN_TIMEOUT
8 years ago
69297b2d7b
Make all EEPROM optimization options available
8 years ago
d609489b22
Drop setup_homepin
8 years ago
167169e1bf
Sanity check for a real probe with M48
8 years ago
395a9f59ac
Merge pull request #7211 from thinkyhead/bf_lcd_bootscreen
...
Use lcd_bootscreen for both
8 years ago
14663efe0d
Merge pull request #7210 from fiveangle/printrboard_revf_cleanup
...
Printrboard RevF cleanup
8 years ago
ae5923a3d0
Make lcd_bootscreen common to both
8 years ago
859248433f
Patch for gcode debug
8 years ago
09c90c2f6c
Printrboard RevF Cleanup
...
-Update Arduino IDE extension descriptions
-Set default motor currents if not defined in Configuration_adv.h
-Support for MINIPANEL LCD
-Support for choosing internal or panel SD
8 years ago
232a10410d
LCD_FOR_MELZI
8 years ago
76c92a1fab
Clean up some trailing spaces
8 years ago
cf96109056
Implement the EEPROM_CHITCHAT option
8 years ago
dcec7178d1
Expose DISABLE_M503 option as a test option
8 years ago
3e78a01262
Merge pull request #7204 from thinkyhead/bf_update_ubl_lcd
...
UBL radar map corrections
8 years ago
1ff7d10c80
Add configuration for Infitary M508 (i3 clone)
...
Based on Infitary's own firmware settings.
8 years ago
4cb45c10dd
Patch ubl lcd mesh map indentation
8 years ago
abd6ba62b4
Some cleanups for ubl lcd mesh map
8 years ago
f17bae1f70
Changes for ubl_lcd_map_control patch
8 years ago
8e0f3b7eba
UBL radar map corrections
8 years ago
fcceed5be6
intermittent Teensy & G26 compile problem
...
===============================================
also an issue with ubl_motion.cpp
8 years ago
30b327d24c
Finish the solution for #7166
8 years ago
6c97c5595c
Add a sanity check for DELTA_AUTO_CALIBRATION
8 years ago
e6e3132f79
make LETTTER_OFF return values that match param indices range
8 years ago
bfbf5f8200
correct value_bool() when FASTER_GCODE_PARSER is enabled
...
Also corrected compile issue when DEBUG_GCODE_PARSER and
AUTO_BED_LEVELING_UBL are both enabled.
8 years ago
406ef69702
Move Anet A8 config to subfolder
8 years ago
379926961c
Add Anet A6 config, edit Anet A8 config
8 years ago
5b03f23fa2
Bring configurations up to date, fix some comments
8 years ago
e3cedfa0ec
Fix a compiler warning
8 years ago
bb0508b6cf
Fix comment in M115 code
8 years ago
85777a56c6
Add A (action) and E (echo) parameters to M118
8 years ago
d1e8d4cd9d
Merge pull request #7167 from thinkyhead/bf_20x4_lcd_update
...
UBL Map Cleanup and LCD display
8 years ago
b492e0878d
Changes to reduce and simplify
8 years ago
98d362c2da
Adding M118 command to send text to serial
...
Allows the user to send text to the serial console in order to
communicate with a host - sending debuging information or action
commands, for example. Text must begin with '//' and this is added if
it is not already present at the beginning of the string.
8 years ago
80abc872f3
Updated to better support the coming "radar"
8 years ago
e90cbf5c16
UBL Map Cleanup
8 years ago
fc140c4962
Followup for I2C_POSITION_ENCODERS
8 years ago
f4246dc8ff
Merge pull request #7165 from thinkyhead/bf_parser_shorthand
...
Use parser.seenval, add shorthand functions
8 years ago
bd776df8c1
Optimize seen_axis by moving 'X' to index 24
8 years ago
05449cf6ee
Add shorthand value accessors to gcode.h
8 years ago
12f092c812
Cleanups to gcode.h, use seenval()
8 years ago
941943c167
Apply const, spacing, etc.
8 years ago
5b11b33854
Add support for Průša MK2 Multiplexer
8 years ago
a4a587a897
Fix spelling of Průša
8 years ago
ba1706a265
Fix spacing in gcode.cpp
...
Followup to #6940
8 years ago
c2c8aafda2
Merge pull request #7157 from thinkyhead/bf_g33_f_parameter
...
G33 F and Height bug fix
8 years ago
627afb29df
Merge pull request #7109 from tnw513/fix-italian
...
added missing italian translation
8 years ago
f0f9fb7465
Remove line that does nothing
8 years ago
99592c8458
Update G33: Add F, fix height bug
8 years ago
31514f453a
Fix #ifdef AVR_AT90USB1286_FAMILY in pinsDebug
...
Can't compile with PINS_DEBUGING enabled on Atmega1284p because it tries
to enumerate pins 46 and 47 (which don't exist) because `#ifdef
AVR_AT90USB1286_FAMILY ` doesn't work as expected.
8 years ago
134116b874
Merge pull request #7153 from thinkyhead/bf_czech_update
...
Updated Czech language
8 years ago
e80958b631
CZ Translate BLTouch and UBL
...
Fixup length
8 years ago
fe7e890b09
Fix issues with ADC_KEYPAD
...
Fixes #7150
8 years ago
a1632cfa0a
Added option 'H' to G29 P4.
...
- Added `H` to set a nozzle height adjustment to surface of the bed.
- Updated G29 P4 comments to reflect changes.
8 years ago
e687782875
Merge pull request #7134 from thinkyhead/bf_skynet_a3_ready
...
Add Skynet/ANET A10 support
8 years ago
b3c36c98fd
Edit digipot currents via LCD, save to EEPROM
8 years ago
3c7bfe798d
Various cleanups ahead of digipot save
8 years ago
9651d01e1a
Add Skynet/ANET A10 support
8 years ago
eb314373bb
Config spacing & consistency, group custom LCDs
8 years ago
6c45fa7dcc
Apply #elif in LCD conditionals
8 years ago
afbc6e3e2f
Update DELTA/SCARA config comments
8 years ago
1e47c17b46
Fix: set digipot mcp4018 Vrefmax to 1.666V
8 years ago
80a232419d
CNC workspace planes and 'P' argument for G2/G3
8 years ago
5fb0d401eb
Formatting tweaks
8 years ago
ed04d0b6be
Label DualXMode enums
8 years ago
786cdea124
Ensure REPRAPWORLD_KEYPAD_MOVE_STEP is defined
8 years ago
ee7163fd3a
Fix pinsDebug compile errors
8 years ago
a9f8e518bf
Fix FILAMENT_WIDTH_SENSOR infinite loop issue
...
Addressing #6992 and #5851
8 years ago
254a11b083
Merge pull request #7120 from thinkyhead/bf_sainsmart_link
...
Add link to F. Malpartida LiquidCrystal library
8 years ago
aeb6d465a4
Merge pull request #7118 from thinkyhead/bf_french_update
...
French update
8 years ago
325f09ea6c
Add link to custom LiquidCrystal library by F. Malpartida
8 years ago
d26c8cc5c8
fix_planner_refresh_e_positioning ( #7103 )
...
* fix_planner_refresh_e_positioning
* Fix
8 years ago
c7f04fbcc7
French translation
8 years ago
4171520729
added missing italian translation
8 years ago
41bfff14e2
Merge pull request #6991 from Bob-the-Kuhn/Mesh-with-babystepping
...
Mesh with BABYSTEP_ZPROBE_OFFSET: add sanity check
8 years ago
424d0bae8b
Merge pull request #7100 from thinkyhead/bf_HAL_prepare
...
Apply maths macros and type changes ahead of HAL
8 years ago
5c59ee4e93
Use current (raw) Z if omitted from G29 WXY or G29 WIJ.
8 years ago
37bc0fce62
Make G29 compatible with M206 Z and G92 Z
...
Use the raw position for mesh measurement. Otherwise the `M206` and
`M92` Z offsets will get canceled out by bed leveling. The downside is
`G29` will not compensate for a poorly set small `M206` fudge value.
To elaborate on this issue, imagine you are probing with a Z home
offset of -0.1, meaning when Z homes, -0.1 is the current position,
implying the ideal bed zero for the nozzle is 0.1mm higher than the Z
endstop. Ordinarily when printing, Z would raise 0.1mm higher.
What happens when we probe is that all points are measured with that
-0.1 included. So when bed leveling is enabled the `M206 Z` offset gets
exactly canceled out by the bed readings.
8 years ago
6c45d0fd81
Apply maths macros and type changes ahead of HAL
8 years ago
8a51e2960c
Improve the experience of editing steps_per_mm
8 years ago
725d9d9a56
Fix and improve LCD value editing display
...
- Fix: When "100.0" changes to "99.0" the LCD shows "199.0"
- Use 2 rows if needed on character LCD, (allowing longer labels…
Germany, et. al.)
- Known issue: A certain length label combined with a certain value
drawing function could, for example, display 99.0 on 1 line, but 100.0
on two lines. Workaround would be to pass a nominal value size argument.
8 years ago
499bb85a95
Clean up, put ubl menu itemization closer at hand
8 years ago
90f5f82926
Step-by-Step Menu addition
8 years ago
0c616700f3
Merge pull request #7097 from thinkyhead/bf_dac_percents_fix
...
Convert DAC percent to uint8_t
8 years ago
6dcf42f1a7
Add Z Fade Height to M420 output if it is enabled ( #7042 )
...
* Add Z Fade Height to M420 Output
Echo the z-fade height when M420 is called, if it is enabled.
* Fix Whitespace
* Fix Compiler complaint
* Missing semi-colon
8 years ago
a1c65fd3d5
convert DAC percent to uint8_t
...
=====================
add test to Travis
8 years ago
907cafcbfd
Support for two switching extruders
8 years ago
cfcd069501
Fix #5699 - LIN_ADVANCE freeze when ADV_RATE returns 0
8 years ago
b8b7ef1902
Merge pull request #7090 from thinkyhead/bf_italian_refix
...
Fix Italian language mapper
8 years ago
42f7f9e013
Merge pull request #7060 from bgort/i2cpefix
...
I2C Position Encoders Example Configs
8 years ago
0b49bddec2
Fix Italian language mapper
8 years ago
2e26a7c752
Added missing Italian translations
8 years ago
4c3dc8bf07
Remove set_current_to_destination from resume_print
...
Addressing #7057
8 years ago
4857a3ba48
Formatting and spelling
8 years ago
3d24c329af
M600 fixes
8 years ago
8fb30aaed6
warn user of an invalid combination
8 years ago
6cb9bb27fe
Move lcd_refresh_zprobe_zoffset definition
8 years ago
d4270f15a9
Spacing tweak in setup()
8 years ago
c61c0a9aeb
Fix status message missing "blink"
8 years ago
062131554f
Followup to #7045
8 years ago
3d043976f7
Add option to disallow filament change without homing first
8 years ago
93da4e83f7
One more space on a short status message
8 years ago
7c95f762f2
Show LCD bed options even without thermal protection
8 years ago
92eb55f246
Reject generous donation of trailing whitespace
8 years ago
428be27893
Formatting adjustments
8 years ago
8d5a37fb3d
Support for a 5th stepper in stepper code
8 years ago
7769a22064
Tweaks to temperature code
8 years ago
d9da126776
Cleanups for UBL / ultralcd.cpp
8 years ago
499d5c3b24
Fix scrolling lcd message for DOGM
8 years ago
7164fd499e
Tweak to G33 P error
8 years ago
c10d763d98
Simpler prepare move conditions
8 years ago
4ebff8eaa5
Drop fastio timer cruft
8 years ago
09bc34f4dc
Allow arbitrarily long retraction
8 years ago
4414825e0d
Merge pull request #7038 from thinkyhead/bf_PCA9632
...
PCA9632 PWM color LED support
8 years ago
9dda022705
fix compile errors
...
================================
Changed to conditional compile for AT90USB issue
8 years ago
b3338ccb01
Merge pull request #6954 from Bob-the-Kuhn/Software-SPI-for-all-CPUs
...
SD card soft SPI - allow all CPU families to use it
8 years ago
40bb0cbf7a
example configurations, etc.
8 years ago
26d20ebcfc
Don't allow filament change without homing first ( #7054 )
8 years ago
824f71d503
LCD Panel Interactive Mesh Editing ( #7045 )
...
Original Mesh Bed Leveling replacement put at top of UBL Menu Options to
help facilitate the removal of the Original Mesh Bed Leveling.
Radar display (and control) of the UBL Interactive Mesh Editing.
8 years ago
445227c807
Fix missing LCD_STR_REFRESH
8 years ago
699aa35df6
Code cleanup for G33
8 years ago
0bc66bf22c
PCA9632 PWM color LED support
...
Add support for the PCA9632 PWM color LED driver used on the Ultimaker 2 and Wanhao Duplicator 6.
8 years ago
896dfa0577
G33 eccentric probe fixes ( #6850 )
...
* excentric probe config fix
* undo last commit
* eccentric probe fix
* oops
* !stow after each probe
* deploy/stow fix
* E parameter + bit of cleanup
* comment
* LCD menu fix
8 years ago
e47029199e
Remove ADVANCED_PAUSE_FEATURE requirement for PROBING_HEATERS_OFF ( #7000 )
...
* Remove ADVANCED_PAUSE_FEATURE requirement for PROBING_HEATERS_OFF
* Add HEATER_IDLE_HANDLER conditional
8 years ago
8326c1c279
Merge pull request #7005 from Diederikvanderpant/bugfix-1.1.x
...
added shift register pins for reprapworld keypad v1.1
8 years ago
07f8da36d2
CL-260 configs
8 years ago
dce665a083
Merge pull request #7025 from magnuspub/patch-1
...
Mod in language_it.h
8 years ago
7b09ab6bda
Merge pull request #7033 from Bob-the-Kuhn/pinsDebug-&-dac_mcp4728-fixes
...
Fix pinsDebug problem & add capability to display more than 70 pins
8 years ago
5bdb4bbc5e
Merge pull request #7030 from thinkyhead/bf_circular_scroll
...
Circular scrolling of the status message
8 years ago
772275ab0c
Create language_it.h
8 years ago
11e28f389e
fix pinsDebug.h error, add capability to display more than 70 pins.
8 years ago
21217d53df
Circular scrolling of the status message
8 years ago
da8e946efb
Reduce size of heater state print code
8 years ago
dde8bb7c8b
Fix extrude_min_temp compiler warning
8 years ago
83263076dc
Merge pull request #7014 from fiveangle/fix_get-set_DrvPct_declarations
...
fix get/setDrvPct declarations
8 years ago
57a51fd5db
Tweak some else clauses
8 years ago
fc89de6d8b
Followup to German language update
8 years ago
92011e3d8c
Create language_it.h
8 years ago
7864b133a8
Fix get/setDrvPct declarations
8 years ago
0b6b7c9c7e
Merge pull request #7013 from thinkyhead/bf_german_update
...
Update language_de.h
8 years ago
f17a3c2474
Merge pull request #6889 from thinkyhead/bf_at90usb_mapping
...
Unify all AVR90USB pin mappings
8 years ago
5a72b6818e
update language_de.h
...
Following #6990 some more translations and some grammar fixes
8 years ago
4cc5444144
Merge pull request #7008 from Bob-the-Kuhn/Z_MIN_PROBE_ENDSTOP-and-Z_MAX_PIN
...
Can't use "#define Z_MIN_PROBE_PIN Z_MAX_PIN" in configuration.h
8 years ago
51bc50214a
Save 8 bytes of SRAM
8 years ago
748bf32388
Unify AVR90USB: pinsDebug changes
8 years ago
5426fc1735
Unify AVR90USB: Pins cleanup
8 years ago
87d8223251
Unify AVR90USB: Pins remap to Arduino
8 years ago
b378deaf89
Unify AVR90USB: fastio changes
8 years ago
e94f79ccea
Patch some serial macros
8 years ago
d91710e9aa
Followup for UBL translated strings
8 years ago
761df686bd
Minor cleanup in gcode.h
8 years ago
897bc2ac1f
Updates for ensure_safe_temperature ( #6963 )
...
* Updates for ensure_safe_temperature
* M600 fixes
8 years ago
1c107b3949
delete problem line
8 years ago
5b270417ed
added shift register pins for reprapworld keypad v1.1
...
I recently upgraded my Marlin to V1.1.x and decided to publish my fix to make marlin compile properly when #define board megatronics 2 in combination with #define reprapworld keypad v1.1. It was previously described in the comments of a closed pull request. MarlinFirmware#472. All the buttons on the keypad are now operational.
8 years ago
2f55870edb
[New Feature] I2C position encoder support ( #6946 )
...
* [New Feature] I2C position encoder support
I plan to continue improving/cleaning this up, as there areas that need work.
* let the cleanups begin.
* progress
* more progress
* comments, rename files, etc.
* clean
* Cleanups per thinkyhead
* a few more cleanups
* cleanups, bugfixes, etc.
* remove unnecessary passes_test(), additional cleanups/optimizations
* cleanups
* misc.
* Fix up I2CPEM.init() and a few other things.
* organize, fix, rename, etc.
* more optimization
* a few more tweaks
8 years ago
28d72f48f1
change to DWORD
8 years ago
8d1d9040b6
add static
8 years ago
a17ffe1ece
Merge pull request #6985 from Kaibob2/patch-1
...
Fix for #6980 (case_light compile problem when EXTENDED_CAPABILITIES_REPORT is enabled)
8 years ago
731c8e6372
Translatable Strings for ubl_G29 ( #6990 )
8 years ago
abb6b8ad54
update language_de.h ( #6986 )
...
There was quite a lot to translate this time. I'm not absolutely confident with the whole UBL stuff and it's a PITA to translate. I don't use any kind of levelling myself as i just have a perfectly level cast aluminium plate as bed.
So maybe someone who really uses it might take a closer look at it after it's merged.
8 years ago
c2eff60d3f
Fix for #6980
...
Line 7830 prevented successfull compilation when #define CASE_LIGHT_ENABLE is uncommented
8 years ago
1419126721
Merge pull request #6965 from thinkyhead/bf_save_more_sram
...
Use createChar_P to save SRAM in bootscreen
8 years ago
a453be7357
Merge pull request #6973 from bgort/autoreportT
...
Enable AUTO_REPORT_TEMPERATURES by default
8 years ago
1d615e0a67
Merge pull request #6976 from Tannoo/Leveling_in_About_Printer
...
Leveling type in About Printer
8 years ago
707707d71a
Fix LCD status message padding
8 years ago
e556ab1dff
Find three-point leveling points on Delta
8 years ago
a27b08e6af
Various code style tweaks
8 years ago
dac29e0f75
Cleaner failure of UBL without EEPROM
8 years ago
9128d9ab45
Improve sanity checks with static_assert, organize
8 years ago
6bb05c4543
Save 20b in smart_fill_mesh with PROGMEM
8 years ago
b7dc4d9973
Save 92b PROGMEM, 14b SRAM with extruder auto fan
8 years ago
c9e3caf928
Save lots of PROGMEM, ~20b SRAM with DIGIPOT_I2C
8 years ago
4134a6b526
Save 88b PROGMEM, 48 bytes SRAM in settings.reset
8 years ago
36cc03a9b4
Save 224b PROGMEM, 48b SRAM in get_homing_bump_feedrate
8 years ago
2a41f0ff84
Save 28b PROGMEM in ultralcd.cpp (line_to_current)
8 years ago
e6d10f6ddd
Spend 48b PROGMEM to save 16b SRAM
...
...by moving `homing_feedrate_mm_s` to PROGMEM.
8 years ago
97e13a30ba
Save over 100 bytes SRAM in pin_is_protected
8 years ago
45c74406cf
Recover 32 bytes of SRAM in Marlin bootscreen code
8 years ago
e1c5a43247
Cleanup stepper current control config options
8 years ago
efc198f952
Spacing, const, comments
8 years ago
4406fba994
Fixes #6975
8 years ago
d28f5d8a78
Fix: z_endstop_adj is never initialized
8 years ago
5d5ff36446
Fix a compile error with _lcd_set_z_fade_height
8 years ago
b88957e0d4
Leveling type in About Printer
...
Show the Leveling system in use on the About Printer screen.
8 years ago
dd071a4a65
Enable AUTO_REPORT_TEMPERATURES by default
8 years ago
8db1197c9b
Enable extended capabilities report by default ( #6969 )
...
Ref #5139
8 years ago
82e662fc69
Remove requirement for LCD when UBL is used. ( #6971 )
...
* Remove requirement for LCD when UBL is used.
* fix previous oversights
* further refinement - error messages for P2 & P4
* require R on G26 when not using LCD; default to all points
8 years ago
2c2b991b59
UBL Manual Build Menu Option ( #6972 )
...
One click option to manually build UBL mesh.
8 years ago
0dd0033b33
Save up to 94 bytes of RAM on 20x4 LCD Display machines ( #6964 )
...
* Save up to 94 bytes of RAM on 20x4 LCD Display machines
Moved the custom screen characters out of RAM into Program Memory. With
SD-Card support and the Progress Bar enabled, this saves 94 bytes of RAM
memory.
This was tested using the example_configurations/FolgerTech-i3-2020
files. So a couple small changes to those files snuck into this Pull
Request.
Probably... We can find similar savings in the Graphics LCD code it we
comb through it. And if so... That is the place we really need to
save RAM memory!
* Tidy up white space and indentation
8 years ago
ba0bd33c38
Removed check for 2560 family
8 years ago
04b07a6ecc
Unused var in Stepper
8 years ago
eb8af486d2
Ensure safe temperature for M600
8 years ago
bfe7fbe5c0
Maintain message scroll rate
8 years ago
6411d65c48
Fix Morgan SCARA S2 calculation
8 years ago
46752588b9
Merge pull request #6948 from Bob-the-Kuhn/redundant_temperature
...
fix redefinition errors for redundant_temperature
8 years ago
5938dae200
Merge pull request #6950 from MagoKimbra/fix_g29_3_point
...
Fix G29 with 3 point
8 years ago
c5e0f08e35
Merge pull request #6951 from fixoid/patch-4
...
Initializing extruder/nozzle servo when turning on the printer
8 years ago
e4937b0285
Cleanup of spacing and formatting
8 years ago
1aab9906e6
Initializing extruder/nozzle servo when when turning on the printer
8 years ago
663ff7f92a
Fix G29 with 3 point
8 years ago
9f295581f0
Ubl delta fixes and improvements ( #6941 )
...
* Change all direct changes of ubl.state.active to
set_bed_leveling_enabled() which handles apply/unapply
leveling to maintain current_position consistency.
Fix invalidation of UBL mesh to invalid unreachable
mesh points as well (delta corners).
Fix UBL_DELTA unapply_leveling logic and when
it gets applied, including fade_height changes.
Add optional M114 D for detailed position information,
disabled from compilation by default (M114_DETAIL).
* UBL_DELTA raw and inline kinematics
* UBL planner fall through fix
* consistent variable names
* Cleanup orphaned code and whitespace changes.
Use _O2.
* compile warnings cleanup
* Remove redundant #ifdef condition
8 years ago
c34d7a29a6
fix redefinition errors for redundant_temperature
...
Removing redundant_temperature from public section and leaving it in the
private section
8 years ago
6a5d3b580d
fix "hex_address not defined" when UBL is enabled
8 years ago
789b2928a8
Tweak scrolling message code
8 years ago
fc7d7f87b4
Init probe test pin with FastIO
8 years ago
0282452cea
Make Parser::seen volatile
8 years ago
9a305a467b
Patch LCD Contrast menu item
8 years ago
90ccac4bcf
Clean up after recent commits
8 years ago
2130f10de8
allow space between parameter and value
8 years ago
ebda4663c3
for discusion
8 years ago
911079104e
Support for ZRIB v2.0 Control Board
8 years ago
65a0212866
Easier override of FILWIDTH_PIN
8 years ago
147d9d76fc
Merge pull request #6928 from Bob-the-Kuhn/Fix-case-light-logic-on-Azteeg-X3-boards
...
Fix case light logic on Azteeg_X3 boards.
8 years ago
4288c4fb4f
Configurations for Malyan M150
8 years ago
1919cb0d1e
Config cleanups
8 years ago
9a9bbfc57c
Fix case light logic on Azteeg_X3 boards.
8 years ago
a32f7b329c
Fix heater status display for advanced pause
8 years ago
445865ea03
REPRAPWORLD_KEYPAD is NEWPANEL but not ULTIPANEL
8 years ago
4296a8b74e
For status scrolling, pad a short message
8 years ago
4a96433b7e
Simplify counting of printable characters
8 years ago
8d69394ae1
Fix LCD printing of progmem strings
8 years ago
c74d4dede6
Prevent illegal leveling combinations
...
Addressing issue #6901
8 years ago
155aa62fb0
Merge pull request #6912 from thinkyhead/bf_better_pulse_delay
...
Account for dual XYZ in pulse delay cycles estimate
8 years ago
a5fa586642
Preferred patch to gcode.h
8 years ago
1b41e1f645
another compile error
...
only seen if
#if ENABLED(TEMPERATURE_UNITS_SUPPORT)
...
#if
ENABLED(ULTIPANEL) && DISABLED(DISABLE_M503)
8 years ago
65bd4c8c94
Merge pull request #6797 from Bob-the-Kuhn/M355-case-lightimprovements-(1.1.x)
...
M355 case light improvements (replaces PR #5685 )
8 years ago
9657e7d3ee
copied file changes from PR #5685
...
==============================
Configuration_adv.h changes
==============================
add "live" LCD update
==============================
P & S version
==============================
final (hopefully) tested version
==============================
update M115 capabilities print
==============================
Menu changes portion of the requested changes
==============================
changed USEABLE_HARDWARE_PWM from a function to a series of macros
==============================
changes per review
8 years ago
8206bb9bb9
fix compile error
...
invalid conversion from 'const char*' to 'char*' [-fpermissive]
8 years ago
df91346188
Account for dual XYZ in pulse delay cycles estimate
8 years ago
7236109f2a
Patch M24 / M125 for delta
8 years ago
be17033762
Fix case light menu toggle
8 years ago
89b93058e3
Merge pull request #6887 from christianh17/PR-sanitycheck
...
enable DEACTIVATE_SERVOS_AFTER_MOVE with switching nozzle
8 years ago
05b66234ae
Merge pull request #6895 from thinkyhead/bf_user_commands
...
Custom user commands menu
8 years ago
84a0a77c59
Merge pull request #6852 from tcm0116/mixing_extruder_lin_advance
...
Generate error if MIXING_EXTRUDER and LIN_ADVANCE are both enabled
8 years ago
266ae8912a
Formatting in _draw_heater_status
8 years ago
6b9ca16f36
Patch lcd_print edge limit code
8 years ago
74d6dee920
User Command (Script) Menu
...
The menu (commands / scripts) is configurable in `Configuration_adv.h`.
- Added conditionals.
- Changed script handling.
- Slimmed and working!
- Added Status message.
- Returning to lcd status screen now!
- Example Configs Updated.
- Cleanups by @thinkyhead
8 years ago
d9c8072037
Edit PROPORTIONAL_FONT_RATIO comment
8 years ago
46b32e4548
Cleanup LCD interface, add lcd_reset_status
8 years ago
ca99d67ede
Fix UBL "Info screen" menu items
8 years ago
2c7a39bc0e
Fix LCD print aborted message
8 years ago
0f1e8c195d
Draw on LCD after value has changed
8 years ago
51587c4b43
Rename Feedrate to Velocity to match prior naming
8 years ago
9677f3f2f5
Patch up LCD Bed Leveling menu
8 years ago
fc2eaab7f3
Show home option in level bed menu
8 years ago
c6a7adc293
Patch G29 A and Q arguments to bypass setup
8 years ago
4cece2d72e
Use NAN for G29 W omitted parameters
8 years ago
2d71569138
Fix spacing in JSON output
8 years ago
b2d3c8aedd
Have G28 do a refresh of the display
8 years ago
50ab9c2e04
General cleanup of spacing, comments
8 years ago
f1e33afda4
Return to Bed Leveling menu when done
8 years ago
78d8c598e1
Fix lcd_synchronize with message
8 years ago
eb39d6e3e2
Don't draw progress bar until it has 1%
8 years ago
194f8b2f55
Start at Z=0 in manual probing
8 years ago
6f89db11f0
Allow lcd_setstatusPGM to reset the alert level
8 years ago
3fe333143c
Case light as a toggle menu item
8 years ago
d013bddfa8
Merge pull request #6876 from thinkyhead/bf_extend_leveling_menu
...
Extend the ABL/MBL Bed Leveling menu
8 years ago
01e7e234c6
Add more options to the Bed Leveling menu
8 years ago
0cbe448edf
Split up Control > Motion submenu
8 years ago
a3645ec921
Reference op with variable name
8 years ago
71367fd518
Scrolling status message option
8 years ago
b0eae68f57
Prevent bed temperature being set too high
8 years ago
493f0b0c62
Fix some compiler warnings
8 years ago
f379a326cc
enable DEACTIVATE_SERVOS_AFTER_MOVE with switching nozzle
...
When using switching nozzle it should be possible to disable the servo after move. Do it only if you do not need the servo power to keep the position.
8 years ago
33279a1e02
Code style tweak to gcode.h
8 years ago
ac959b12ee
Updates to language_es.h based on latest updates. ( #6871 )
...
Spanish language updates
8 years ago
55c700d537
Tweak to gcode.h
8 years ago
868e7db4ae
value check was looking at the code
8 years ago
fb5e0ffe16
Unify M600 and M125 pause features ( #6407 )
...
* Unify M600 and M125 pause features
* Cleanup per thinkyhead's comments
* Rename filament_change_menu_response to advanced_pause_menu_response
* Include HAS_BED_PROBE in QUIET_PROBING
* Update gMax example file
* is_idle() is out of scope without the braces
* Convert FT-i3-2020 to Advance Pause names...
* Allow pause even if not printing
8 years ago
b3a97b5013
Patch up LCD level bed menus
8 years ago
78af2b1444
Fix PROBE_MANUALLY via G-code
8 years ago
082da23391
One fewer EOL in M503 output
8 years ago
b15e531464
Fix screen change on character display
8 years ago
44e657766e
Add incompatibility error to Sanity Check for MIXING_EXTRUDER and LIN_ADVANCE
8 years ago
735405b2a4
Merge pull request #6848 from thinkyhead/bf_scara_M665
...
Add M665 for SCARA
8 years ago
ffa901f373
Merge pull request #6839 from thinkyhead/bf_day_ending_in_y
...
UBL ultralcd.cpp patches
8 years ago
361cbba113
Use M665 to set SCARA angle offsets
8 years ago
5ed63a5724
Apply const in prepare_kinematic_move_to
8 years ago
5cbe0244c5
Fixes for spindle/laser and SCARA probe bounds
8 years ago
1f52c9f5df
Neater Megatronics 3 pins
8 years ago
af81cb4cbb
Patch for M503 output
8 years ago
1d167a6874
Some cleanup, fixes for ultralcd.cpp UBL code
...
- Free up 30 bytes of SRAM in UBL LCD code
- Fix BUILD_ABS_MESH temperature
- Fix UBL indentation in ultralcd.cpp
- UBL vars lowercase, "convert to positive" sensibly
8 years ago
f4028fe088
New GCode Parser - Implementation
8 years ago
002a06c507
New GCode Parser - Configuration
8 years ago
ad915b667e
One more mesh_index_to_npos update
...
Followup to #6827
8 years ago
2881f0a48d
Fix, extend G42 with P (probe) parameter
...
- Also fix handling of SCARA and misuse of `codenum`.
8 years ago
d252d1b6a2
Merge pull request #6831 from thinkyhead/bf_move_g7
...
Move G7 to G42
8 years ago
82ca6248e2
Move G7 to G42
...
See: #6777
8 years ago
26ffa558a3
Use redraw flag for both types of LCD
8 years ago
3ff7515527
Merge pull request #6817 from cbusillo/patch-1
...
missing enable for M605 for duplication mode
8 years ago
34cfbc90cd
Use new attribute macros in more places
8 years ago
85b967657e
Embed G26/G29 in ubl class, with enhancements
8 years ago
c99bd69889
Apply const float & more
8 years ago
ad5638f78c
Cleanup some fastio code
8 years ago
e271521c39
Single user_canceled function in G26
8 years ago
c2ea22da49
Clean up whitespace
8 years ago
ceb62fc7e1
Fixes #6828 : M428 bug
8 years ago
48f7652143
UBL G29 -P3.1 smart fill ( #6823 )
...
* UBL G29 -P3.1 mesh fill with distance-weighted least squares fit.
* Back to original -O0 on G29 for now.
8 years ago
850203fb3a
Merge pull request #6816 from thinkyhead/bf_lcd_live_editing
...
Constrain LCD status message rendering
8 years ago
3129260c44
Misc. Clean Up ( #6822 )
...
* Misc. Clean Up
Mostly UBL related clean up.
- But fixed a bug in the thermistortables.
- Made G26 more responsive to user aborts.
- Added sanity checks for older name for UBL_MESH_VALIDATION.
- Made G29 P4 able to edit invalidated mesh points
- Restore a reasonable Fade Height for UBL when creating new state information
- Get UBL's Topology Map to look a little bit better
- Make sure the user doesn't see a blank screen when doing Mesh Editing.
* Huh??? GitHub Desktop screwed up!
* get the planner object in scope
* Fix out of scope z_fade_height
* Travis timed out...
I need a change so I can force a new commit and sync.
8 years ago
3b4116e73b
missing enable for M605 for duplication mode
...
I believe gcode_M605 will not be called when using DUAL_NOZZLE_DUPLICATION_MODE without this change.
8 years ago
5e8892d6b5
Show Restore Failsafe item with EEPROM off
8 years ago
76af9ac7c5
tweaks
8 years ago
ba5910ab6c
Constrain LCD status message rendering
8 years ago
2c309a8f7c
Fix set_lcd_contrast
8 years ago
22dbb2117c
Merge pull request #6812 from thinkyhead/bf_day_ending_in_y
...
Cleanup code, organize & document fastio pin mappings
8 years ago
364f8fb613
Update Configuration.h files to better names ( #6814 )
...
Changed UBL_G26_MESH_EDITING to UBL_G26_MESH_VALIDATION
Added UBL_MESH_EDIT_MOVES_Z to prepare for that change (coming next)
8 years ago
d7fda2fe49
Formatting, const in G33
8 years ago
1519b0e7c1
Split up fastio.h, document pin mappings
8 years ago
49599caade
General cleanup to utf_mapper.h
8 years ago
02f15f6775
UBL-related cleanup, spacing, standards
...
Reference: #6804
8 years ago
52e20aeab3
Pins-related cleanup, formatting
8 years ago
ea906e4da7
Merge pull request #6810 from thinkyhead/bf_lcd_live_editing
...
Add "live editing" option to LCD menus
8 years ago
11fc9564c9
Add live editing option to LCD menu
8 years ago
8a0a5cfccc
Temp-related cosmetic changes
8 years ago
b29dbbd5e4
Use uint16_t for temps
8 years ago
ebcd1aaf88
Access hotend/bed temperatures as float
8 years ago
6ce2b1ff4a
G33 evolutionary changes
8 years ago
3c061a9f9a
UBL tabs, whitespace, spelling, etc.
8 years ago
75badae2f8
Disable PROBE_MANUALLY for UBL
...
Plus some other UBL tweaks.
8 years ago
94a4af1d7f
Merge pull request #6773 from thinkyhead/bf_lcd_patch_e5
...
Patch LCD code for 5th extruder
8 years ago
01f452c37c
Tweak Azteeg X3 PRO _pins.h so Viki2 will work for those without a case light.
...
- add comment explaining that the Panucatt Viki2 wiring diagram uses pin 44
8 years ago
e09b4ce4a5
Add checking
8 years ago
13599a73c7
Add `G7` gcode command to move between UBL mesh points
...
- can be augmented in the future to enable for other leveling systems
Quite simple, but did not want to modify `G1` as the additional checking would slow it down.
Tested & working.
8 years ago
43c24f0027
Fix recent regressions, &c.
...
- fix broken `M421` due to less-than-careful optimization
- add HOME_AFTER_DEACTIVATE define to advanced config so not everyone has to rehome after steppers are deactivated
- misc. cleanups (remove unused label, unused variables)
8 years ago
3843a5151a
Patch LCD code for 5th extruder, EEPROM reset
8 years ago
6c064bb7d6
Some probe_pt error-handling
8 years ago
3370329751
Fix broken EEPROM save/load
8 years ago
f0fe26c411
Ensure Arduino.h and configs are included for serial.cpp
8 years ago
ffb5353294
Merge pull request #6738 from thinkyhead/bf_config_crc_rebase
...
Implement CRC16, develop mesh allocation table
8 years ago
e806e6419a
Merge pull request #6768 from thinkyhead/rc_spindle_m3_m5
...
Spindle / Laser support
8 years ago
d6f49c6626
Merge pull request #6752 from jdelahayes/bugfix-1.1.x
...
Update french language
8 years ago
55a87da036
SPINDLE/LASER implementation
8 years ago
ffe0e2d19a
SPINDLE/LASER pins changes
8 years ago
99c4900a98
SPINDLE/LASER config changes
8 years ago
a3abfeac47
Mark strings needing translation
8 years ago
7f4e4b1212
UBL name/state methods
8 years ago
7852369987
Implement CRC16, develop mesh allocation table
...
- Add crc16 utility function
- Implement CRC16 for config store, remove old checksum, increment layout version
- Move UBL mesh store/load to MarlinSettings; increment UBL_VERSION
- Begin to lay out MAT structure, prototype functions, etc.
- Rename ubl.state.eeprom_storage_slot to .storage_slot
- Misc. optimization
- Cleanup/standardize/improve some messages
This is a work in progress!
8 years ago
00d358d92d
Fix a PROBE_MANUALLY bug in ultralcd.cpp
8 years ago
c2321b1cdd
Separate SWITCHING_NOZZLE and SWITCHING_EXTRUDER
8 years ago
238fb53617
Patch home_all_axes to ignore G28 XYZ parameters
8 years ago
6b6630e11b
Clean up trailing whitespace and tabs
8 years ago
d30e478f97
Fix incorrectly optimized find_closest_mesh_point_of_type() function ( #6761 )
8 years ago
5a9e52a3e0
Use COPY_XYZE macro to copy exactly 4 elements ( #6758 )
...
Fix undefined DELTA_PROBEABLE_RADIUS for UBL_DELTA
8 years ago
8606644343
M48 Fix for Delta Configuration Files & UBL G29 only homes when necessary ( #6757 )
...
* Fix M48 for Delta's There was a scope issue: DELTA_PROBEABLE_RADIUS wasn't getting defined.
* Check if the specified G29 command requires homing
8 years ago
0cd398c25d
UBL Menu Updates ( #6751 )
...
Things should be pretty stable for a while.
But it wouldn't surprise me if the Delta people have a need for a few special commands.
8 years ago
a5737cba7c
Update french language
8 years ago
0fef9a2983
Remove "ubl." prefix from calls within ubl method
8 years ago
14a4257c7b
UBL tabs, whitespace, spelling, etc.
8 years ago
56e2e331ed
UBL G29: replace 'O' with 'T'
...
Since we already used 'T' for `G29` Topology Report in the past, and since 'T' is available…
8 years ago
091f94a6bf
Fix up M421 and some comments
8 years ago
4ec4ecff1a
Reduce find_closest_mesh_point_of_type a little
8 years ago
f1a1c6873e
Patch lcd_implementation_status_screen compiler warning
8 years ago
2266c0780d
fixed spanish lang
...
It was missing MSG_FILAMENT_CHANGE_HEAT_2 and MSG_FILAMENT_CHANGE_HEATING_2
8 years ago
b213a45efb
UBL_DELTA post merge cleanup ( #6705 )
...
* UBL_DELTA post merge cleanup:
fix fade_height, lost during some previous merge
fix float cx,cy which are not const
move repeated z_cxcy calc line inside loop
style fixes and comment fixes/alignment
* Update ubl_motion.cpp
remove unnecessary parentheses
* Update Conditionals_post.h
Change name of define to more accurate meaning:
UBL_GRANULAR_SEGMENTATION_FOR_CARTESIAN
which is not and should not be the default for cartesians with UBL.
8 years ago
6f86c46fa6
Fix typo that caused scope issues for DELTA ( #6750 )
8 years ago
1fbcbc05f6
UBL no longer flout's the sacred GCode standard ( #6745 )
...
Also clean up ubl_motion.cpp debug info and fix declaration of cx & cy
8 years ago
c262ea92e0
Merge pull request #6733 from abusca/Euskera
...
Updated Basque translation
8 years ago
267f77b18b
More constraint on axis_unhomed_error
8 years ago
645096b87a
Updated Basque translation
...
Updated Basque translation with new strings.
8 years ago
40d95a4e23
Update the gMax files to display better with Proportional Fonts ( #6727 )
...
Update the gMax files to display better with Proportional Fonts
8 years ago
c06af63f87
G26's default behaviour ought to be the entire mesh ( #6726 )
...
Adding the capability to specify ahead of time how much of the validation pattern to print made it so by default G26 only did one circle and no connecting lines.
It is more natural for the unsophisticated user to just do the entire mesh (bed). We default the repetition count to GRID_MAX_POINTS+1 to insure we get every last one of them!
8 years ago
15040821e0
Setup FolgerTech-i3-2020 files better for the user ( #6724 )
...
UltiPanel was enabled, but technically, it is a REPRAP_DISCOUNT_SMART_CONTROLLER
Either configuration works on the machine. But we want it 'Right'.
Setup the Proportional Font spacing so columns line up nicer on PronterFace and Repetier Host.
8 years ago
67c9b1e332
Update M665 comment, fix M665 code_value code.
8 years ago
37399e3cb5
Fix prepare_move_to_destination_cartesian for UBL
8 years ago
a7fb55ea6d
Use GRID_MAX_POINTS. Some formatting
8 years ago
e51b5774db
Merge pull request #6699 from mtowara/patch-1
...
Bugfix PRINTER_EVENT_LEDS
8 years ago
056350d9bf
Merge pull request #6656 from FHeilmann/fix_fwretract_pos_z_move
...
Fix FWRetract with positive z-moves during retracted state
8 years ago
0e582bcfb7
Fix #6691 - redundant line in M665
8 years ago
68ae7c8d7a
Bugfix PRINTER_EVENT_LEDS
...
Extra closing curly bracket terminates while loop early if PRINTER_EVENT_LEDS defined
8 years ago
ba29da56e0
Add disclaimer for verboten parameters
8 years ago
0696dda470
Cleanups to UBL_DELTA
8 years ago
cbfca29522
M421 tweaks, just to use const
8 years ago
233f824dd6
Define GRID_MAX_POINTS
8 years ago
b17e2d3dcd
Apply const in Marlin_main.cpp
8 years ago
92fbea2906
Add some GCodes to the header of Marlin_main.cpp
8 years ago
94e90ca26c
Tweak M80/M81 descriptions
8 years ago
ee50dfaaf3
Adjust G26 arguments
8 years ago
b0ba5cae73
Fix a spelling boo
8 years ago
91841d75c9
UBL_DELTA ( #6695 )
...
UBL on Delta's.... Should be close! Should not affect any Cartesian printer.
8 years ago
445003dbb8
Merge pull request #6694 from bgort/g29p2b
...
UBL: Minor improvement to G29 P2
8 years ago
5a5dba6fc8
UBL: Minor improvement to G29 P2
...
- allow H code value to override probing height
- minor cleanups
8 years ago
ae676490c9
M421: Add 'adjust closest point' capability
...
- Split M421 into separate versions for bilinear and ubl
- Fix minor issue in G26
8 years ago
9a688d1456
Merge pull request #6682 from thinkyhead/bf_M80_s_arg
...
"M80 S" to report the state of the PSU pin
8 years ago
b63e82f309
M421 Mesh Point Offset and misc. UBL clean up ( #6685 )
...
* M421 Mesh Point Offset and misc. UBL clean up
Allow M421 to accept an offset as well as absolute value for a specified
mesh point.
And misc. UBL clean up to reduce redundent code.
* Better error checking for M421
* Fix M421 Y index bug
I just noticed.... We've had a Y index bug for who knows how long?
8 years ago
539e0c2f31
"M80 S" to report the state of the PSU pin
8 years ago
df42428281
Merge pull request #6665 from bgort/font
...
Add proportional font adjustment ratio
8 years ago
2604742191
Add proportional font adjustment ratio
...
- update example configs
8 years ago
b3407a371b
Merge pull request #6676 from bgort/g26zhop
...
G26: Add 0.5mm Z-bump between circles to minimize pattern scraping
8 years ago
c33d99c5b2
Merge pull request #6680 from bgort/g26repeat
...
G26: Add 'Repeat' Option
8 years ago
7325035aac
Merge pull request #6637 from Tannoo/UBL_Menu_System_1.1
...
UBL Menu System 1.1
8 years ago
f7a201b0d0
G26: Add 'Repeat' Option
...
- Allows for specifying number of points to print/validate, using 'R' code like with G29 P4 Rx
- Moved the code for Random to 'M' so we could be consistent with G29 P4
- G26 instructions indenting/cleanup
8 years ago
9c5957fc77
G26: Add 0.5mm Z-bump between circles to minimize pattern scraping
8 years ago
4da14b14f4
UBL Cleanup/Bugfix
...
- Fix bug in ubl_line_to_destination
- Improve/fix output of some ubl.h functions
8 years ago
66db6c3acc
UBL Menu System 1.1
...
/**
* UBL System submenu
*
* Prepare
* - Unified Bed Leveling
* - Activate UBL
* - Deactivate UBL
* - Mesh Storage
* Memory Slot:
* Load Bed Mesh
* Save Bed Mesh
* - Output Map
* Map Type:
* Output Bed Mesh Host / Output Bed Mesh CSV
* - UBL Tools
* - Build Mesh
* Build PLA Mesh
* Build ABS Mesh
* - Build Custom Mesh
* Hotend Temp:
* Bed Temp:
* Build Custom Mesh
* Info Screen
* - Build Cold Mesh
* - Fill-in Mesh
* Fill-in Mesh
* Smart Fill-in
* Manual Fill-in
* Info Screen
* Continue Bed Mesh
* Invalidate All
* Invalidate Closest
* - Validate Mesh
* PLA Mesh Validation
* ABS Mesh Validation
* - Custom Mesh Validation
* Hotend Temp:
* Bed Temp:
* Validate Mesh
* Info Screen
* - Edit Mesh
* Fine Tune All
* Fine Tune Closest
* - Adjust Mesh Height
* Height Amount:
* Adjust Mesh Height
* Info Screen
* - Mesh Leveling
* 3-Point Mesh Leveling
* - Grid Mesh Leveling
* Side points:
* Level Mesh
* Info Screen
* - Output UBL Info
*/
8 years ago
3b0127cf8e
Fix compiler complaint related to M100
8 years ago
11104f177b
Apply const in BABYSTEPPING
8 years ago
081bf1f879
Patch #else / #endif comments
8 years ago
a9487c9443
Reduce redundancy in BLTOUCH conditionals
8 years ago
8d961b51cc
Eliminate M100 compiler warnings?
8 years ago
efb9ce24d9
Merge pull request #6645 from tcm0116/bltouch_config
...
Automatically define Z_MIN_PROBE_ENDSTOP_INVERTING for BLTouch
8 years ago
e2f07917ab
Merge pull request #6644 from tcm0116/bltouch_menu
...
Move BLTouch LCD menu from Main to Main/Control
8 years ago
fe96376a73
Fix FWRetract with positive z-moves during retracted state
8 years ago
47cae2929f
Patch platformio.ini to fix build error in DevIoT
...
For compatibility with DevIoT, until that can be solved.
8 years ago
911a87e006
Disable SCARA feedrate scaling by default
8 years ago
71396f77d3
Cleanups following recent commits
8 years ago
dca48f0e63
Move platformio.ini back to Marlin folder - it works there
8 years ago
a6dafb058e
Small reduction in error code size
8 years ago
a1e04942a2
Cleanup to software PWM variables
8 years ago
a20d0794e6
Automatically define Z_MIN_PROBE_ENDSTOP_INVERTING for BLTouch
8 years ago
3279337f47
Move BLTouch LCD menu from Main to Main/Control
8 years ago
6cb0fa4128
Cleanup previous implementation of new quiet probing
...
Saves a few lines of code.
8 years ago
4b7f8ad9c6
Merge pull request #6610 from bgort/pio-improvements2
...
PlatformIO-related changes
8 years ago
56ca47ab9d
Patch configuration temp units
8 years ago
421dd62800
Adjust spacing of "spaces"
8 years ago
26dba44cd3
Patch redundant lcd settings
8 years ago
34b5041576
Spacing adjustment, ubl_G29
8 years ago
1c4ed8b106
Note 5 extruders in config comments
8 years ago
6e4a5cc8c6
Patch missing const in temp_abs
8 years ago
d35e2fda10
Merge pull request #6622 from bgort/silentprobing
...
Improve BLTOUCH_HEATERS_OFF functionality
8 years ago
6ed52fb765
Adjust spacing in LSF
8 years ago
110afff415
More misc UBL fixes and update gMax examples ( #6632 )
...
I think I forgot to Sync before I committed last time. Some UBL
changes did not stick.
Also, update the gMax configuaration.h file so other than unique numbers
and settings, it exactly matches the default configuration.h file.
8 years ago
d92fa40c62
misc. UBL fixes ( #6631 )
...
* Restore LSF functionality
Some of the typo's persisted... Hopefully this gets them all fixed.
* Restore user's expectations of how G28 should behave
* Allow Nozzle size control with ornery host programs
8 years ago
faa270071d
Improve BLTOUCH_HEATERS_OFF functionality
...
- rename to PROBING_HEATERS_OFF
- move heater pausing functionality into thermalManager
- add variables, pause(), ispaused(), other functions
- add fan pausing functionality -> PROBING_FANS_OFF
- add probing_pause() wrapper
- move pausing into do_homing_move() and do_probe_move() to minimize quiet time and so other probe types can benefit
- example configs
8 years ago
d66e9efac5
G29 P1 stops reporting Invalid location with this patch
8 years ago
ce507deb9f
Support temperature units in M503
8 years ago
a59066bca9
Various improvements - mostly UBL-related ( #6607 )
...
UBL Clean up.
8 years ago
0446dd3ad8
PlatformIO-related changes
...
- move platformio.ini out of source directory to be more consistent with 'normal' PlatformIO usage
- facilitates IDE integration
- add related .gitignores
8 years ago
77769e284f
Edit configuration comments
8 years ago
6876e79d42
Tweak command index increment
8 years ago
7fcb5c1424
Minor fix in K8200 readme
8 years ago
267f3a03d9
Fixed USE_CONTROLLER_FAN #define usage
8 years ago
ae7c602031
fix error in M105 output -- use SERIAL_PROTOCOL for ints instead of SERIAL_PROTOCOL_F ( #6584 )
...
also removed wayward 'address of' ampersand in setTargetHotend and setTargetBed parameters
8 years ago
3cd9af2409
bugfix-1.1.x ReadMe, Version, helper scripts
8 years ago
15268770f5
Fix broken fwretract recovery extruder feedrate
...
When both lowering and recovery are performed using the same "prepare_move_to_destination()" the extruder recovery feedrate ends up being ignored and, instead, is only capped by either the maximum e-speed or the time it takes to perform the z-lowering.
Performing the two moves separately from each other ensures a correct recovery feedrate.
8 years ago
58210c3a19
Merge pull request #6568 from thinkyhead/rc_bilinear_extension
...
Add EXTRAPOLATE_BEYOND_GRID option to bilinear leveling
8 years ago
da08e11acd
Add EXTRAPOLATE_BEYOND_GRID option to bilinear leveling
8 years ago
6834e36871
Merge pull request #6567 from thinkyhead/rc_sdcard_stop
...
Shutdown heaters, autotemp on SD Cancel
8 years ago
399efd66ed
Click to resume
8 years ago
1196e3ca59
SDCard print completion can use "M0"
8 years ago
6854f08d22
Shut down autotemp in disable_all_heaters
8 years ago
acec237092
Shutdown heaters and fan after canceling a print from the SD card
8 years ago
11b6a3cbb6
Fix regression in least_squares_fit.cpp
8 years ago
e1b85ff67b
Merge pull request #6559 from thinkyhead/rc_more_optimal
...
Compact smart_fill_mesh slightly
8 years ago
9890141f7b
M100 tweak
8 years ago
2658cc707a
Treat temperature as integer, when possible
8 years ago
1b2c7ec20a
Make G26 compatible with inches and thermal unit modes
8 years ago
241bdffe65
Dress up Bilinear Leveling code
8 years ago
67ecf06cc4
Patch issue in gcode_M900
...
Noted in #6550
8 years ago
de5e485ed7
Explicit upward angle solution
8 years ago
ecdf68735f
Compact smart_fill_mesh slightly
8 years ago
628391304f
Merge pull request #6552 from thinkyhead/rc_more_ubl_cleanup
...
Further cleanup of UBL
8 years ago
902fe76db9
Merge pull request #6556 from thinkyhead/rc_use_controller_fan
...
Implement USE_CONTROLLER_FAN as a feature
8 years ago
7ba7474a73
Drop extra parens from address-of operator
8 years ago
0bf5add075
Use UBL_MESH_(MIN|MAX)_[XY] for G29 move limits
8 years ago
b8ba3b7647
Use 'sq' macro where possible
8 years ago
66eba3346b
Remove G29 lcd control debugging
8 years ago
3517154135
Reduce code size, fix bug in smart_fill_mesh
8 years ago
c4e34adcf1
Apply formatting, coding standards to UBL
8 years ago
f4239e62b1
Merge pull request #6557 from thinkyhead/rc_hotend_status_item
...
Keep refreshing LCD if hotend status is on-screen
8 years ago
fc857c5b78
Merge pull request #6549 from thinkyhead/rc_bltouch_refix
...
Fix BLTOUCH_HEATERS_OFF bug
8 years ago
b39f634252
Continuously update LCD when hotend status is displayed in Filament Change screens
8 years ago
2c13922c46
Implement USE_CONTROLLER_FAN as a feature
8 years ago
492bc536bf
Modify debug methods to take PSTR
8 years ago
e5a27d9f36
G29 P2 & P4 bug fixes & improvements
8 years ago
b93be716cf
Remove trailing whitespace
8 years ago
76eca9732d
Fix mis-named language string define in Dutch
8 years ago
806f670092
Merge pull request #6511 from Bob-the-Kuhn/UBL--G26-minor-improvements
...
UBL: G26 minor improvements
8 years ago
0803c9d997
Merge pull request #6533 from thinkyhead/rc_autocal_patches
...
General cleanup of G33
8 years ago
ff5fed137f
Fix BLTOUCH_HEATERS_OFF bug
8 years ago
ca1dd739a3
Organize ubl.h defines by the files they serve
8 years ago
0449f69179
Cleanup patch to recent merge
8 years ago
da2abad636
Various cleanups of G33
...
- update comment section
- redefined P5 grid
- minor clean to probe radius routine
- updated EEPROM version to V37 according remark in #6517
8 years ago
7ce613db0a
Fix Conditionals test for endstop plug used by Z2 or probe.
8 years ago
ef750ae86b
Towards supporting Z2 in Endstops::report_state
8 years ago
c03c623951
Sanity-check Z2 endstop assigned to a nonexistent pin.
8 years ago
70f31b6c76
Throw an error if no E stepper is free for X2, Y2, Z2
8 years ago
ac69eca586
Merge pull request #6538 from bgort/ubl_gridlbls
...
Fix, cleanup, prettify `G29 O` output
8 years ago
99b11db1a1
Merge pull request #6537 from thinkyhead/rc_cleanup_sunday
...
Various leveling-related patches
8 years ago
41e63bbb7c
Fix Horizontal and Vertical UBL optimization bug. ( #6540 )
...
* Fix Horizontal and Vertical optimization bug.
And drastically reduce the debug code foot print....
* Yeah Baby!
The debug print is going A - OK !
8 years ago
e79b335367
Patches for leveling reactivation in G28 / M48
8 years ago
92e22c3bf2
Fix, cleanup, prettify `G29 O` output
8 years ago
7d5cd7e0d7
Tweak set_bed_leveling_enabled
8 years ago
ed81e9b3d3
Adjust leveling conditionals
8 years ago
a64e5659ce
Clean up G26 external references, private vars
8 years ago
2887c20788
Add a function to home all axes (i.e., gcode_G28)
8 years ago
8f895d5e01
Merge pull request #6530 from thinkyhead/rc_cleanups_2
...
Fixes for DUAL_NOZZLE_DUPLICATION_MODE
8 years ago
8002672938
Fixes for DUAL_NOZZLE_DUPLICATION_MODE
8 years ago
f69acde966
Merge pull request #6528 from MarlinFirmware/revert-6416-negative-mesh-fix
...
Revert "Fix for Meshpositions if printer has negative endstop positions"
8 years ago
4803a4322e
Revert "Fix for Meshpositions if printer has negative endstop positions"
8 years ago
4f74c416a4
Patch for BLTOUCH_HEATERS_OFF
8 years ago
1823a6ea29
Patch for missing DELTA_HEIGHT
8 years ago
d814e468d2
Fix set_heaters_for_bltouch and usage
...
- Only call `set_heaters_for_bltouch` when actually deploying/stowing
- Clear `next_emi_protection` when re-enabling heaters
8 years ago
4e1448e75a
Various fixes for compiler warnings
...
add BLTouch-related messages in english and (rusty) french;
add missing endstops.h in ultralcd.cpp;
fix misc. compiler warnings;
fix lsf_reset - ZERO macro can't handle a pointer as it would only memset the size of the pointer, not the size of the entire struct
8 years ago
fc9919b749
Merge pull request #6515 from thinkyhead/rc_cleanup_sunday
...
Some minor cleanups to code formatting
8 years ago
c12bc51a59
cardreader.cpp spacing tweak
8 years ago
46b714a52f
Cleanup spacing in pinsDebug.h
8 years ago
88141ca717
Remove things that aren't pins from pinsDebug_list.h
8 years ago
ff35b11d08
Resolve compiler complaint about memset volatile *
8 years ago
0b421e97c9
Rename some (unused) OMCA pins
8 years ago
c2c9f01c8e
Patch newly-introduced bug in IS_Z2_OR_PROBE
8 years ago
819df5e06d
Cleanups to pins debugging
8 years ago
42824b0e1f
Use new serial spacing function to save PROGMEM
8 years ago
cd72901fb7
Cleanups to UBL code
8 years ago
ce87c7803e
implement G26 changes per review
8 years ago
769817ce5e
Need to define this for Rigidboard V2
...
Motor current defaults need to be defined for Rigidboard
8 years ago
39c6c5621b
Merge pull request #6416 from SkyNet3D/negative-mesh-fix
...
Fix for Meshpositions if printer has negative endstop positions
8 years ago
671a44b8aa
Merge pull request #6410 from teemuatlut/LVD-Delta
...
Delta auto-calibration updates
8 years ago
5d5c9a040a
Merge pull request #6509 from thinkyhead/rc_config_patches
...
Configuration cleanup
8 years ago
d480b6f75a
Enable E1 stepper for DUAL_NOZZLE_DUPLICATION_MODE
8 years ago
dcde202157
Add startup notice & update host temperatures while waiting
...
Right now G26 doesn't send a notice to the host that it's running. It's
not until the heaters are at temperature that you know for sure if it's
running or not.
Added host temperature prints so that someone watching the host
interface will see the temperatures change during the warm up period.
Updates are sent every 5 seconds.
8 years ago
54751e8557
Put DISTINCT_E_FACTORS adjacent to the affected settings
8 years ago
0dbe4b3e54
Edit configurations to reduce verbosity, arrange logically
8 years ago
0750933bc6
Merge pull request #6490 from Bob-the-Kuhn/Missing-X-stop
...
Endstop not enabled if pin is zero
8 years ago
5ace3699b1
Output (commented) coordinates on G29 S-1; helps identify the x/y points that correspond with i/j coordinates, which eases manual tweaking of z values ( #6507 )
8 years ago
d7d4378481
Remove inaccurate version description
8 years ago
f169c04604
Merge pull request #6491 from thinkyhead/rc_cleanup_wednesday
...
Various cleanups for recent merges
8 years ago
6d63255ddc
Merge pull request #6508 from bgort/pio_improvements
...
PlatformIO-related improvement
8 years ago
cafc48dff8
little oops
8 years ago
627730948d
Add U8glib as a dependency to platformio.ini for those who use PlatformIO; this makes compiling even easier as u8glib will be downloaded and included automatically.
...
Also added the new .pio-related directory to .gitignore, and a few ignores for those who use cmake.
8 years ago
5974d8e168
change G26 default nozzle size to 0.4, consistent with instructions ( #6506 )
8 years ago
471a321624
leaner code for probe routine
8 years ago
3c0d5ba0a1
allow idle() to be called - fixes sometimes crash/hang in G29 I; ( #6505 )
8 years ago
2509587b5a
Correct over optimization of pre-initialized variables ( #6500 )
...
* Correct over optimization of pre-initialized variables
NEAR_ZERO() works most of the time... But it leaves corner cases
uncovered. We need to explicitly check if these variables are +/-
infinity.
* Correct over optimization of pre-initialized variables
8 years ago
585c00a728
Proposed changes
...
This is what I did yesterday:
- basicly gave the tests more comprehensive names; put all the
declarations at the top; got rid of the magic negative C-value (renamed
to P + A, O, T)
- "cos(RADIANS(180 + 30 * axis)) * (1 + circles * 0.1 * ((zig_zag) ? 1 :
-1)) * delta_calibration_radius" compiles wrong is zig_zag statement is
without brackets
- DELTA_TOWER_ANGLE_TRIM reset to 3 values (the calcs use the 3th value
to normalize will not compile otherwise)
-Wrote 3 dummies to keep EEPROM lenght the same
-Reset the configs to the 'original' with autocal + menu disabled (but
can be enabled of course)
8 years ago
29fa241617
Initial patches to G33
8 years ago
12ce051b55
Add a function to output spaces to serial
8 years ago
42f4c53254
Starting on G33 rewrite
8 years ago
baf3b91460
DELTA_TOWER_ANGLE_TRIM only needs AB
8 years ago
27cd165adf
Last three Spanish language strings
...
Updates as per @thinkyhead request.
8 years ago
2cc9774f34
Apply bltouch_menu
...
As proffered in #6252
8 years ago
1a111180de
Clean up set_heaters_for_bltouch
8 years ago
7db805930a
Cleanup configurations
8 years ago
8bf3a3fcdb
Remove inaccurate comments from ubl.h
8 years ago
47557d5a19
Fix up formatting in ubl.h
8 years ago
0a8e09c723
Clean up excess whitespace, comment formatting
8 years ago
a35c681453
Clean up least_squares_fit
8 years ago
40089249c3
add PIN_EXISTS to HAS_xyz_MIN macro
8 years ago
8020069371
Apply coding standards for indentation
8 years ago
dabca83742
Merge pull request #6437 from Kaibob2/patch-1
...
Update language_de.h
8 years ago
3d0a4c4ea9
Update language_de.h
8 years ago
6bf1d50188
Added missing translations ( #6458 )
8 years ago
404f767d44
Update language_tr.h ( #6463 )
8 years ago
5e701524f8
Update language_cz.h for new translations ( #6465 )
...
* Update language_cz.h for new translations
* Correction translate
* Revert correction back to hotend
8 years ago
0a92ce7a98
Completed french translation ( #6475 )
8 years ago
ff4fb42e7d
Add new strings as per recent changes in RCBugFix ( #6482 )
...
Adding missing strings to Spanish language, as per changes recently
done to the RCBugFix branch.
8 years ago
67d1fc5556
Update language_nl.h ( #6478 )
...
updated the RCbugfix release with additional Dutch translations
8 years ago
8c6b4537a6
Fix issue in itostr4sign with numbers <100 ( #6487 )
...
The first character in the string wasn't blanked if the number went from >= 100 to <100, resulting in artefacts in the displayed string.
8 years ago
4ea8d0f89b
Solved "The Travis CI build failed "
8 years ago
ed6b361e27
cleanup ready to squash
8 years ago
7a6a1ef583
M666 normalize positive values to <=0
...
M666
+ tower radians absolute value
8 years ago
4075b95519
Allow BL-Touch users to control heaters during probe event ( #6485 )
...
The Configuration.h file entries for BL-Touch have been updated to:
```cpp
//#define BLTOUCH
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are
turned off during probe event
```
8 years ago
6e8ecb908a
Shut down heaters during BL-Touch probe event
...
The electro-magnetic interference from the bed and nozzle are affecting
the BL-Touch repeatability for some users. This problem can be helped
by shutting down the heaters during the actual probe event and then
quickly turning them back on.
Because this code is messing with the heaters, it is written in a
paranoid manner. It only turns the heaters back on if everything is
EXACTLY as it expects things to be. The BL-Touch probe must have been
put into a deployed state less than 20 seconds prior, or the stow()
function will NOT turn the heaters on.
This code has been tested and works for both G28 and probing functions.
8 years ago
d8102aeca8
Cn negative : no tower angle calibration
...
Giving a negative number of probe points disables the tower angle
correction calibration ('4point' instead of '7point' solution)
EEPROM version updated
8 years ago
3601f08e87
Better tuned FolgerTech i3-2020 example file
8 years ago
a20b7d9581
Better tuned Example file for FolgerTech i3-2020
...
Also setting up Z-Probe on the machine.
8 years ago
bf2fe46062
Update language_de.h
8 years ago
11d34be060
Update language_de.h
8 years ago
817ecb9ff4
Merge pull request #6453 from thinkyhead/rc_cleanup_wednesday
...
Minor cleanups, work-in-progress
8 years ago
22f6e277af
Get example files fully into compliance
...
Change to support new name GRID_MAX_POINTS_XY
Start UBL at version 1.0 in the CUSTOM_MACHINE_NAME
8 years ago
a9bc1d30cc
z_offset change
...
Avoids to have to recalibrate the delta_height after a z_offset change
8 years ago
ec26e23e7e
Add my two 'Nice' machines as example configurations
...
These are my two 'Nice' machines. Both are good example machines. The
FolgerTech i3-2020 is probably the best value kit on the market right
now. And it has developed a 'Cult Following' of hobbiests. I'll always
have an up to date Configuration.h file set for it, so it may as well be
an example configuration.
And the gCreate gMax 1.5+ is the best printer I've ever seen that runs
Marlin. For sure, I'll always have up to the minute Configuration.h
files for this printer also. I've moved over to using the gMax as my
primary development machine for Marlin. So... Besides being a good
machine, it is a nice convienience for me to have this Configuration.h
file as an 'Example'.
8 years ago
adb8e68592
Fix stuck "Print Aborted" LCD message
...
Fixes #6393
8 years ago
096b927102
Minor optimization of FILAMENT_WIDTH_SENSOR
8 years ago
5bdb0b567d
Cosmetic patches
8 years ago
38ae7f4238
Added more translation strings
...
There are some quite tricky ones which are hardly translateable.
Maybe @Sebastianv650 can review this
8 years ago
4d96d3eab1
Bootscreen delay after clear, then set chars
...
Fixes #6426
8 years ago
5512130d6c
Only set Compare Mode for channel A
...
Fixes #6445
8 years ago
d467e97679
Smart-Fill and Mesh-Tilting (both 3-point and grid) working!
...
Also... The memory corruption issue may be fixed. The GCC compiler
was inlining static functions and this caused the G29() stack frame to
become much larger than the AVR could handle.
8 years ago
a699967ec8
Merge pull request #6443 from thinkyhead/rc_interrupt_fastio
...
Patch fastio.h with Timer 2 interrupt support
8 years ago
2823bf0874
Update fastio.h with special handling for Timer 2
8 years ago
fd535e111a
Fix up XYZ_CONSTS_FROM_CONFIG macro
8 years ago
03c2f756b9
Update language_de.h
8 years ago
dcf30a69d6
Allowing #define DELTA_TOWER_ANGLE_TRIM[C_AXIS]
...
More consistent with M665 where C-value is allowed as well, then
normalized
8 years ago
f41fb2b635
Numerous UBL-related changes:
...
* relocated ubl state to config. store:
* removed a number of ubl state variables and padding which were largely unused - saved 58 bytes of both SRAM and EEPROM;
* modified ubl sanity_check - no longer checks removed state variables that were otherwise unused, where checking didn't seem to accomplish anything, ultimately;
* removed pre_initialized state, saving 64 bytes of SRAM;
* removed automatic saving of UBL state after UBL activation/deactivation;
* consolidated multiple GRID_MAX_POINTS_X/Y to 'Global Leveling' section of EEPROM;
* minor update to G29 Sx notes/instructions;
* renamed mesh load and save parameter to 'slot' from 'm' for clarity;
8 years ago
f1a4758cef
use progmem instead of sram for mesh_index_to_x/ypos array;
...
fix maximum mesh_index_ array size at 16 (15+1);
8 years ago
87d240042a
Optimize number-to-string functions, no-fan display
8 years ago
959566cf0a
Update note about M163 / M164
8 years ago
830851df13
Spend some SRAM to optimize bilinear leveling
8 years ago
091179d960
bed_level_grid => z_values (also *_virt array)
8 years ago
23cdbbb2d3
Add a method to refresh bilinear bed level after a change
8 years ago
ccda63c473
Drop the accessor form for LCD value editing
8 years ago
10da175be5
Fix a pair of compiler complaints
8 years ago
ff0018e287
Format hex values as uppercase
8 years ago
77aa16005d
Polish font
...
Add polish font for GLCD displays only.
HD44780 work properly without polish character.
Update language_pl.h.
8 years ago
244f67590e
Delta probe height bug solved
8 years ago
406a83ff2d
Fix for Meshpositions if printer has negative endstop positions
8 years ago
3ed737425d
Fix typo in new SET_COM macro
8 years ago
88649b06a6
use planner.z_fade_height, etc. instead of private, ubl-specific g29 fade height
8 years ago
004928148c
Tower angles
...
Adding '7-point' tower angle correction calibration
8 years ago
76ec7a0f80
Adding upto 7*7 probe grids
...
- adding Cn 5, 6 and 7
8 years ago
d4f593d200
Delete 'expert level'
...
and getting rid off verbose level 3 and configuration_adv settings
8 years ago
13c8493878
M665 rework and related issues (all delta's)
...
- Making M665 compatible with repetier (see
http://reprap.org/wiki/G_code#M665:_Set_delta_configuration )
- M665 B also sets the radius for manual calibration menu
- Converting tower ajustment definitions to arrays - tower angle
corrections compatible with Esher 3D wizzard
- Only tower angles need to be adjustable with M665 and stored to EEPROM
- tower radius and diag rod can be adjusted in the FW only with #define
8 years ago
e0e069c6d8
Clean up trailing whitespace
8 years ago
9b94210394
Bring FLSUN config more up to date
8 years ago
b0aa256bc0
Updates for all configs
8 years ago
ee46ce1743
Add and apply interrupt helper macros
8 years ago
6131c62499
General cleanup
8 years ago
2c86dfd3b5
Fix compiler type conversion errors after LCD changes
8 years ago
55f9e76610
Merge pull request #6367 from thinkyhead/rc_cleanup_followup
...
Cleanup after some direct commits
8 years ago
d38a792a91
Merge pull request #6382 from MagoKimbra/fix_configuration_store
...
Fix double definition in configuration_store
8 years ago
b98bc034ae
Replace c_assert hack with static_assert
8 years ago
5eb2b1a790
Clear up G29 compiler warnings
8 years ago
4ce2a63db0
Apply const, spacing to Marlin_main.cpp
8 years ago
e97f1284c1
Cleanup of pins testing code
8 years ago
e9b53ae00c
Cleanup after some direct commits
...
https://github.com/MarlinFirmware/Marlin/commit/5e9726530ff21d3bc62beaa6
ac1b9437c276130a
8 years ago
e05d050a1e
Add hex routine to print an address
8 years ago
4542282f5e
Fix broken TOGGLE macro in fastio.h
8 years ago
ed52275a14
Fix double definition in configuration_store
8 years ago
de569e3d4e
Merge pull request #6327 from Bob-the-Kuhn/M43-toggle-&-Z-probe-fixes
...
M43 Toggle & Z servo test - fix bug & add another check
8 years ago
f33a650ecc
Merge pull request #6368 from thinkyhead/rc_linear_advance_eeprom
...
Add Linear Advance values to EEPROM and LCD
8 years ago
a00ae4790a
Replace M905 with unique code M900
8 years ago
1286d9603d
Clean up and organize ultralcd.cpp
8 years ago
3cdf78a79f
MSG_VOLUMETRIC => MSG_FILAMENT
8 years ago
f8e77d6545
Add Linear Advance values to EEPROM and enable configuration of K via LCD
8 years ago
eb2d073dae
Add M905 R for setting the E/D ratio directly
8 years ago
69dfa54a84
Use code_value_linear_units for known-linear axes
8 years ago
b956f2642b
Show M503 report with current linear units
8 years ago
ba4a005ceb
Merge pull request #6373 from mtowara/mt_makefile_fix
...
Fix Makefile build
8 years ago
150b15c311
fix compiler errors generated by more stringent flags in Makefile:
...
- use volatile for registers
- avoid implicit casts
8 years ago
f6095c9325
fix missing serial.cpp in Makefile
8 years ago
871f92378c
Tweak headings in EEPROM structure
8 years ago
bf2548be4a
Merge pull request #6362 from tcm0116/babystepping
...
Only queue babysteps if axis is in a known position
8 years ago
9c410ddf68
Fixed an issue where a display with a hardware reset pin (LCD_RESET) may not get initialized properly.
8 years ago
72a7fac461
Only queue babysteps if axis is in a known position
8 years ago
5e9726530f
Setup to find data corruption and general clean up
...
This data corruption problem is very difficult. Just changing the code
a little bit changes whether the problem even happens and what is
affected. I need these changes in the main branch so I can operate with
the extra debug code always available and turned on.
Everything is setup such that if M100 is turned off or DEBUG(ECHO) is
turned off, the code is not affected. M100 has been made a little bit
more inteligent so it can display the serial command buffers in a more
meaningful way (because the data corruption seems to often times end up
in that area).
8 years ago
e519e95953
Merge pull request #6358 from thinkyhead/rc_doubleclick_fix
...
Show Cancel/Continue screen for ABL "Level Bed"
8 years ago
a81606c680
Show Cancel/Continue screen for ABL "Level Bed"
8 years ago
51021bc7b8
Merge pull request #6353 from thinkyhead/rc_endstop_coolness
...
Clean up endstop triggering code
8 years ago
857dec0990
Merge pull request #6342 from benlye/benlye-fix-softspi
...
Fix softspi variant conditional for 1284p
8 years ago
4e04383d18
Merge pull request #6354 from thinkyhead/rc_doubleclick_fix
...
Fix undefined symbol if DOUBLECLICK_FOR_Z_BABYSTEPPING and HAS_BED_PROBE defined
8 years ago
8dd0492e68
Show lcd_babystep_zoffset screen if DOUBLECLICK_FOR_Z_BABYSTEPPING is enabled and HAS_BED_PROBE is defined
8 years ago
0a2f60fab4
Make spi.h inclusion conditional
...
spi.h is only needed if HEATER_0_USES_MAX6675 is defined, so making its inclusion conditional on HEATER_0_USES_MAX6675 being defined.
8 years ago
60471b7592
minor improvements
...
Configuration_store.cpp - changed a couple of print statements so the
values were printed. The old method resulted in the formula being
printed.
ubl_G29
1) added support for R option to P4. Now probes all points unless R is
present and the number is greater than 0.
2) P2 - moved map print statement so it showed the point that was
currently being probed, The old location did this only for the first
point.
3) P4 - Moved the map print for the same reason.
ultralcd.cpp - changed "Mesh Editor :" to "Mesh Editor" because the LCD
draw routine puts a ":" in automatically so you end up with an extra ":"
using the old message.
8 years ago
25a61e9061
Improve motion-based endstop triggering code
8 years ago
a2356c2825
Fix compiler warning about z-offset callback
8 years ago
037c964d26
Reverse bools on prepare_move sub-functions
8 years ago
d9c4333806
Extra logging of Dual X modes
8 years ago
4067d15c92
Cleanup, extend TMC2130 implementation
8 years ago
d60c02c5b1
Cleanup, extend TMC2130 configuration
8 years ago
0e97b3d6d0
Fix some configuration spacing
8 years ago
cf6f483378
Merge pull request #6187 from thinkyhead/rc_flsun_delta_autocal
...
Delta: DELTA_HEIGHT, G33 Auto-Calibrate, drop M206/M428, add M665 H
8 years ago
24882adfbf
Allow NO_WORKSPACE_OFFSETS with DELTA_AUTO_CALIBRATION
...
- On `DELTA` the `M665 H` option supplants `M206`
- On `DELTA` `NO_WORKSPACE_OFFSETS` only reverts `G92` behavior
- Spawn 4 conditionals based on `NO_WORKSPACE_OFFSETS`
- Optimize coordinate space conversion for `DELTA` workspace
- To keep EEPROM version, retain `home_offset[XYZ]`, just ignore XY
8 years ago
1acb84ba02
fix 1 bug, add error messages
...
===============================================
make changes requested by reviewers
===============================================
add M43 test to Travis, fix EOL, remove trailing spaces
8 years ago
8821963873
Implement delta auto-calibration and delta_height
8 years ago
b305699046
Merge pull request #6341 from benlye/benlye-lcd_babystep_zoffset
...
Fix lcd_babystep_zoffset()
8 years ago
03bda24d19
Add delta auto-calibration and configuration for Flsun AC
8 years ago
1bd25fd2b3
Clean up config spacing, section headings, etc.
8 years ago
153b0ae967
Tweak Delta Printer configuration note
8 years ago
81ffd98dd9
Allow faux leveling
8 years ago
2355d87e11
Merge pull request #6346 from thinkyhead/rc_broken_abl_test
...
Add support for SOLENOID_PROBE
8 years ago
f4685c28b7
Reorder Conditionals_post.h and add comments
8 years ago
0ac2b5c045
Additional 5 extruders support (solenoids, microstepping)
8 years ago
fd2a0784ba
Add support for SOLENOID_PROBE
8 years ago
5803ba43a9
Expose EXT_SOLENOID as an advanced option
8 years ago
ea734f910b
Use direct pin manipulation whenever possible
8 years ago
19d0c6a0c0
Patch to init W with RGBW_LED
8 years ago
3e079660b0
Never define SLED_PIN
8 years ago
1a447d0047
Fix variant conditional for 1284p
8 years ago
1f9ee42750
Fix lcd_babystep_zoffset()
...
Resolve 'steps_to_mm was not declared in this scope' compilation error after recent changes to merge babystepping with M851
8 years ago
445d39e95a
CORExx endstop detection fixes
...
1. The CORExx printers were checking more endstop axis than needed.
2. Removed all the CORE_xx_NOT logic. The motor_direction(xx) routine
always returns the correct data so it is not needed. It was actually
cause the wrong direction to be checked in some cases.
3. Made the logic/defines for X, Y & Z axis all the same. The old logic
checked inappropriate configurations for Y and didn't check all the
correct configurations on Z.
4. Added a check for zero steps before the X, Y & Z axis. Previously
would check the they axis even if there were no movement.
8 years ago
28fec61f92
M100 Fixes and Features
...
All the memory accesses need to be unsigned char in order to avoid
false errors being detected. Two new features are available for
developers to call into the M100 functionality to look for data
corruption.
8 years ago
52c3ace102
Add BABYSTEP_ZPROBE_OFFSET as an optional feature
8 years ago
cd4e6abec8
Group BABYSTEPPING options together
8 years ago
60ac41a32c
Add code to handle changes to zprobe_zoffset
8 years ago
8fa4209916
Movement/adjustment should be reverse of probe offset change
8 years ago
361655828f
Use babystepping to adjust bed probe z-offset
8 years ago
36e5c7c389
Merge pull request #6330 from thinkyhead/rc_improvements
...
Sanity check per-axis options' array sizes
8 years ago
02fca543bb
Merge pull request #6272 from thinkyhead/rc_adc_variable_rate
...
Make ADC sensor reading frequency adjustable
8 years ago
34308368c0
Sanity check per-axis settings for size
8 years ago
ac96ae89f9
Apply `const` in Stepper::isr
8 years ago
2fa1e882d0
Merge pull request #6325 from thinkyhead/rc_M20_with_size
...
Simplified M20 with size
8 years ago
1b12fea0fa
simplified M20 with size
8 years ago
4022b971db
Merge pull request #6315 from thinkyhead/rc_unify_M421
...
Unify M421
8 years ago
b236562354
Merge pull request #6306 from thinkyhead/cleanup_after_6302
...
Adjustments to M100
8 years ago
5e4f4d387f
Swap MBL z_values dimensions to [X][Y]
8 years ago
063f641651
Unify M421
8 years ago
6d5400dc31
Merge pull request #6240 from thinkyhead/rebuild_rgb_led
...
Extend RGB LED with Printer Events
8 years ago
dac21ec680
Add support for an RGBW LED
8 years ago
e7746ffee4
Extend RGB LED support, adding Printer Events
8 years ago
c7063eb55c
theTarget => target_temp
8 years ago
36bda2bade
Add HAS_RESUME_CONTINUE shorthand macro
8 years ago
53e6c33c37
2 is DXC_DUPLICATION_MODE
8 years ago
a2cb0a3d54
Use multiply for delta probe constraint
8 years ago
6487c96a4a
Merge pull request #6313 from Kaibob2/patch-10
...
Allow 10mm Movements for Z-Axis
8 years ago
001bc14255
Allow 10mm Movements for Z-Axis
...
I use the movement options via LCD quite often. Especially to get the nozzle out of the way. I see no reason, why the 10mm option is disabled for the Z-Axis, this is why i always delete this line when i compile a new version.
If this is unwanted, please just close this PR
8 years ago
6a9b008044
Fix MINIMUM_STEPPER_PULSE maths
8 years ago
68773f4486
Simplify stepper macros by renaming enable/disable macros
8 years ago
e02a5a6371
Add macros for delays by machine cycle
8 years ago
ecc537015a
Have M109 / M190 do nothing with no parameters
8 years ago
03aa9a390e
Apply coding standards to M100, break up into functions
8 years ago
48c16fc6ef
Merge pull request #6307 from thinkyhead/rc_less_no_reentrance
...
Only lcd_synchronize needs no_reentry
8 years ago
4fcfe926d6
Only lcd_synchronize needs no_reentry
8 years ago
67fb7f82ac
Merge pull request #6283 from thinkyhead/rc_eeprom_z_fade
...
Save / restore z_fade_height in EEPROM
8 years ago
eff5af569b
Merge pull request #6300 from MagoKimbra/rc_fix_mesh_report
...
Fix mbl_mesh_report
8 years ago
4a18968c10
Merge pull request #6297 from Kaibob2/patch-9
...
Fix EPROM -> EEPROM
8 years ago
ba85faabc0
Fix M100 Free Memory Checker
...
M100 had numerious changes and quit working. Part of the problem is
the overloading of the SERIAL_PROTOCOL functions. Also, some of the
address arithmatic was changed to use char *ptr and passing ptr into the
SERIAL_PROTOCOL functions caused them to try to print a string instead
of a number. M100 is working again. Let's keep it that way!
M100 has been expanded to now have a function int
free_memory_is_corrupted() that can be called from other code to see if
the free space is still contiguous. It may make sense to add a flag to
control its verbose nature but right now, the extra chit chat is very
helpful to know int free_memory_is_corrupted() is doing the right thing
and what it found at various points when it was called. A 'Show &
Tell' is coming up with int free_memory_is_corrupted().
8 years ago
3b82db5fe9
Missing semicolon in ultralcd.cpp
...
When PARK_HEAD_ON_PAUSE is defined Marlin won't compile because of two missing semicolon.
8 years ago
7d2e637867
Fix mbl_mesh_report
8 years ago
afeb0452ef
Fix EPROM -> EEPROM
...
These fixes are neede because before it showed the englisch text even if language = de was selected
8 years ago
7f950a80c0
Make ADC sensor reading frequency adjustable
8 years ago
786af73e24
Convert config code to a static class
8 years ago
5b9476fe78
Added z_fade_height to EEPROM-Settings
...
Firmware was forgetting the z_fade_height in Planner, set by M420 Z<f>,
after each reset or loading settings from EEPROM. Added the float
z_fade_height to EEPROM-Storage, now remembers the value.
8 years ago
9343f6a95f
Put TOSHIBA with other stepper driver options
8 years ago
7a704af5e6
Merge pull request #6284 from thinkyhead/rc_wt150_rebase
...
wt150 (Mightyboard Rev E) & RRD Full Graphic Smart Controller
8 years ago
2031fb913b
Fixed comparison of float values to NaN
8 years ago
e48a52a530
Patch a display issue with LCD_DECIMAL_SMALL_XY
...
The `ftostr4sign` function got munged by the `WITHIN` patch
8 years ago
1a3cd6a090
Merge pull request #6213 from thinkyhead/rc_gitattributes
...
Init bed_level_virt_interpolate on EEPROM load
8 years ago
314a02e2d5
Toggle with XOR
8 years ago
8bc0d90b00
Init bed_level_virt_interpolate on EEPROM load
8 years ago
20dd5376b8
Cheaptronic V2
...
Add support for new electronics
www.reprapobchod.cz
8 years ago
4cdda5615b
Bring other configs up to date with wt150 changes
8 years ago
9b0885f4f6
Allow boards without a thermistor
8 years ago
64cfcebe66
Update SlowSoftI2CMaster link. MightyBoard digipots I2C bus has no resistors.
8 years ago
0eb16d9ff7
Add example config for the wt150 printer with RepRapDiscount Full Graphic Smart Controller
8 years ago
652bedfa18
Add RepRapDiscount Full Graphic Smart Controller support to MIGHTYBOARD REVE
8 years ago
44cdebb8f1
Add software spi support for max6675
8 years ago
191fec009f
Add digipot i2c control for MCP4018
8 years ago
e5b16081cb
Update TinyBoy2 configurations
8 years ago
1855534f20
Config files cleanup
8 years ago
c26a315d0b
Additional missed patches
8 years ago
39617e10b8
Patch configs comment formatting
8 years ago
c54f6cf23d
Updates to support 5 extruders
8 years ago
2b88ccd0aa
Apply UBL mesh bounds to remaining configs
8 years ago
60be3d264b
Macros to print floats, hiding imprecision
8 years ago
b356d73239
Merge pull request #6278 from thinkyhead/pr_delta_angles
...
Followup to additional delta trim options
8 years ago
f78d44e91a
Added support for delta tower angle corrections.
8 years ago
d3b4d84586
Merge pull request #6277 from thinkyhead/pr_roxy3d_rcbugfix
...
Unify UBL Command Parsing
8 years ago
d4ce839351
Cleanup following Pins Debug update
8 years ago
c7a8f7970b
Formatting / cleanup
8 years ago
29d4ec8257
Support 5 extruder auto fans
8 years ago
824f3c1c0d
Fix up configuration comments
8 years ago
995ed90248
Clean up Filament Width Sensor comments
8 years ago
5a7b810fdd
General comment cleanup
8 years ago
0027c22839
Drop extraneous calls to lcd_update
8 years ago
d6db7a9b03
patch "step_remaining"
8 years ago
cbc2331187
Use LCD_MESSAGEPGM over lcd_setstatuspgm
8 years ago
3729510b1e
Set and check main parameter values, report all errors
8 years ago
34d3ed9ab1
These items were removed from the UBL Command Parsing
...
Having these items randomly (and errorniously) disappear cost me several
hours of work yesterday.
8 years ago
15edb41cee
Patches to UBL
8 years ago
14cf527bb8
Getting setup for debugging
8 years ago
f8408036f2
Merge pull request #6264 from thinkyhead/rc_five_extruders
...
Support up to 5 extruders in Marlin
8 years ago
f7fc49c3a3
Finish name change
...
DAC_STEPPER_DFLT wasn't changed to DAC_MOTOR_CURRENT_DEFAULT in all
places on PR #6124
8 years ago
832064e4f2
Implementation changes to support 5 extruders
8 years ago
04050237f0
Header and pins changes to support 5 extruders
8 years ago
2a84122edd
Configuration changes to support 5 extruders
8 years ago
edf18977c1
Patch pins files hotends/e-steppers sanity check
8 years ago
dc84678fc1
Fix HOTEND_STATUS_ITEM for graphical display
8 years ago
a0de5d94e2
Merge pull request #6258 from benlye/benlye-bilinearfix2
...
Better fix for bilinear Z offset and G29 Z (update to #6251 )
8 years ago
b23aef5b8d
Merge pull request #6190 from Bob-the-Kuhn/Stop-and-Kill-prints---round-2
...
Message for every KILL and STOP (also need delays)
8 years ago
945303c0d5
eleminate bootscreen.h
8 years ago
ef3da3971e
Update ubl.h
8 years ago
8644dc170b
get synchronized to current file names
8 years ago
1451b7eacf
UBL's Grid Based Leveling code
...
Pretty much... The code is in place. Still more work to do. But it
has a lot of hooks and variables in other code, so commit and merge
before I pick up a million 'Conflicts'.
8 years ago
549055f20c
Merge pull request #6124 from Bob-the-Kuhn/MCP4728-consistency
...
MCP4728 consistency & fix ultralcd.cpp (PRINTRBOARD Rev F and RIGIDBOARD V2)
8 years ago
a77875c9d2
Merge pull request #6114 from Bob-the-Kuhn/try2-add-BLTouch-retry
...
Another BLTouch retry place (replaces PR #6108 )
8 years ago
3b9ff2cb12
Merge pull request #5676 from Bob-the-Kuhn/configuration.h
...
Configuration.h - reword Z PROBE section
8 years ago
6643d553f6
# This is a combination of 2 commits.
...
# This is the 1st commit message:
MCP4728 consistency & fix ultralcd.cpp
The MCP4728 DAC controls the stepper motor current strenth on the
PRINTRBOARD Rev F and RIGIDBOARD V2 boards.
PR #5792 on 9 FEB 2017 implemented default drive percentages but only on
the RIGIDBOARD V2.
This change moves the default settings to Configuration_adv.h.
Also, ultralcd.cpp won't compile because of a type def conflict.
Changed it to match the one in stepper_dac.cpp
===========================================================
reword stepper curent section for clarity
===========================================================
change name & improve comments
===========================================================
changed name from A4JP to SCOOVO_X9H per PR #6139
# This is the commit message #2 :
fix typo
8 years ago
a44b3432c1
add BLTouch retry to a second place & add/update delays
...
=================================================
implement requested changes
=================================================
remove delays (they're in another PR) & move return
8 years ago
a5abc61fb9
Merge pull request #6219 from Bob-the-Kuhn/Servo-probe-and-toggle-pins
...
M43 - add Toggle utility and Z servo utility (replaces PR #5864 )
8 years ago
3b8926bd09
improved wording, consolidation of info, BLTouch warning
...
==============================================
clarified BLTouch calculation & changed comment delimitters/flags
I found it hard to pickout the various sections in this area so I
changed most comments from // style to /** ... */
Made the BLTouch calculation simpler and clarified the units of measure
for the result.
============================================
add changes to example configurations
============================================
add TinyBoy2 to this PR & add BLTouch Delay
8 years ago
55d296aaf0
pinsDebug with more features, uses less RAM
...
I've just uploaded a major change to pinsDebug.
The big change was creating an array in FLASH that contained every
active pin definition. That reduced the RAM memory usage considerably
but increased the FLASH usage.
Creating the array requires going through the pin list twice. Rather
than having two copies of it in the code I moved the list out to another
file (pinsDebug_list.h) and then just did two #includes.
From the user’s view they’ll see the following changes:
1. Now reports all the names assigned to a pin
2. The port is now reported in addition to the pin number.
3. When PWM0A & PWM1C share a pin, both PWMs are reported
4. More PWM/Timer info is reported
One new item that may cause some concern is the usage of the LINE
predefined preprocessor macro. It may not be available if the Arduino
IDE goes to a different compiler.
Includes support for 1284 & 1286 families.
Memory usage changes when enabling PINS_DEBUGGING:
ATmega2560
FLASH
. without 52576
. with new 64592
. with old 62826
. new-out 12016
. old-out 10250
. new-old 1766
.
RAM
. without 2807
. with new 2875
. with old 3545
. new-out 68
. old-out 738
. new-old -670
==================================================================
minor changes - mostly formatting
1) added newline to end of teensyduino file
2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings
about redefining TEENSYDUINO
3) removed some trailing spaces
reduce PROGMEM size & update pin list
Reduced PROGMEM usage by
1) converting often used macro to a function
2) moved as much as possible into the function
This required creating two arrays of address pointers for the PWM
registers.
==================================================================
update with new M3, M4, M5 pin names
==================================================================
report I/O status for unused/unknown pins
8 years ago
e116723b8b
Adjust indentation in ubl.h
8 years ago
1b3a26f2f5
Rename all UBL files with a ubl_ prefix
8 years ago
d13991ae18
Use same config name for all mesh dimensions
8 years ago
f9686a108c
add Z servo test and toggle pins to M43
8 years ago
62cbaa302e
Z_DUAL_ENDSTOP - make offset a configuration item
...
The offset for Z_DUAL_ENDSTOP (z_endstop_adj) is already in Marlin.
This PR just makes it a configuration item.
z_endstop_adj is initialized in two places so both had to be modified.
8 years ago
c9e35004e7
pinsDebug with more features, uses less RAM
...
I've just uploaded a major change to pinsDebug.
The big change was creating an array in FLASH that contained every
active pin definition. That reduced the RAM memory usage considerably
but increased the FLASH usage.
Creating the array requires going through the pin list twice. Rather
than having two copies of it in the code I moved the list out to another
file (pinsDebug_list.h) and then just did two #includes.
From the user’s view they’ll see the following changes:
1. Now reports all the names assigned to a pin
2. The port is now reported in addition to the pin number.
3. When PWM0A & PWM1C share a pin, both PWMs are reported
4. More PWM/Timer info is reported
One new item that may cause some concern is the usage of the LINE
predefined preprocessor macro. It may not be available if the Arduino
IDE goes to a different compiler.
Includes support for 1284 & 1286 families.
Memory usage changes when enabling PINS_DEBUGGING:
ATmega2560
FLASH
. without 52576
. with new 64592
. with old 62826
. new-out 12016
. old-out 10250
. new-old 1766
.
RAM
. without 2807
. with new 2875
. with old 3545
. new-out 68
. old-out 738
. new-old -670
==================================================================
minor changes - mostly formatting
1) added newline to end of teensyduino file
2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings
about redefining TEENSYDUINO
3) removed some trailing spaces
reduce PROGMEM size & update pin list
Reduced PROGMEM usage by
1) converting often used macro to a function
2) moved as much as possible into the function
This required creating two arrays of address pointers for the PWM
registers.
==================================================================
update with new M3, M4, M5 pin names
==================================================================
report I/O status for unused/unknown pins
8 years ago
4abd53f65a
Adjust indentation in ubl.h
8 years ago
f5c5c1f771
Rename all UBL files with a ubl_ prefix
8 years ago
f1d50ac1dc
Fixing bilinear Z offset and G29 Z
...
The fix in #6251 for bilinear Z offset was flawed and broke the Z parameter of G29 for bilinear levelling. This is reverted and a different fix is used for the double-addition of the Z-probe offset to the bilinear correction grid.
8 years ago
eb1e6aa29b
Use same config name for all mesh dimensions
8 years ago
c961dd084d
Add hidden option to output Bilinear grids in JSON
8 years ago
df7b4252fd
Reduce M420 code for UBL slightly
8 years ago
8866158d03
Add LEVELING_DATA as a capability
8 years ago
0a2b4f3486
Fix bilinear levelling z offset
...
Since run_probe was altered to return the probe Z position rather than the nozzle Z position bilinear levelling has been broken because the Z-offset has been applied twice - once in the run_probe function, and then again in the G29 code for bilinear levelling.
8 years ago
44a849bdce
Fix broken M206/M428/G92 offsets
8 years ago
52978e5ba5
Fix spelling mistake when UBL's mesh is Inactive
8 years ago
0423e93c42
Fix M421 AUTO_BED_LEVELING_BILINEAR and AUTO_BED_LEVELING_UBL
...
M421 was not connected up for AUTO_BED_LEVELING_BILINEAR.
M421 needed to migrate mesh data to new UBL EEPROM layout.
8 years ago
3412950abc
Merge pull request #6209 from thinkyhead/rc_psu_zero
...
Power Supply 0 as "General"
8 years ago
3e9e94801f
Fix problem described in issue # 6175
...
As it turns out... an unsigned int can not go to less than 0, so the
loop never terminates.
8 years ago
289e3d6844
Merge pull request #6215 from thinkyhead/rc_bed_false_alarm
...
Fix thermal runaway when nonexistent bed temp is set
8 years ago
948728e63b
Fix line-endings in UBL_G29
8 years ago
699310d1d2
Fix: Thermal runaway if nonexistent bed's temp is set
8 years ago
c56eec29f0
Configurable delay for BLTouch servo emulation
8 years ago
deaad78df9
Merge pull request #5678 from Bob-the-Kuhn/G38-optional-double-tap
...
G38 bug fix, made double touch optional & reverted to Z_MIN_PROBE
8 years ago
5bce731962
Fix LCD preheat menus
8 years ago
4c72167af3
Prevent a warning on echo_command
8 years ago
9b5fd9522e
Fix formatting, order for a UBL change
8 years ago
54173c80ad
Power Supply 0 as "General"
8 years ago
a2775d0c70
can wstring be removed?
8 years ago
de4e19f17e
Patch MarlinSerial to match up with 32-bit version
8 years ago
2cbc7b4b73
Relocate serial macros and functions
8 years ago
eaa66f3c46
Indent MarlinSerial code
8 years ago
7a7a80e6c5
status_printf => lcd_status_printf_P
8 years ago
0e6ec34228
Use PSTR versions of lcd_status... to save SRAM
8 years ago
34e2420b9b
Apply const args, clean up find_closest_circle_to_print
8 years ago
e19fbd27ce
Minor spelling patch
8 years ago
790a3e9a8c
Remove extraneous check of UBL_G26_MESH_EDITING
8 years ago
7310110ec0
Fix logic of UBL::fade_scaling_factor_for_z
8 years ago
1a775cecac
Revert behavior of enqueue_and_echo_commands_P
8 years ago
79d42d87c1
Syntax cleanup
8 years ago
b47fd31c37
Revert some changes to UBL
8 years ago
185337e787
add delays to allow stop & kill messages to get out
8 years ago
63abb65146
Update description of PINS_DEBUGGING
8 years ago
73e193da1d
Implement LCD_BED_LEVELING for PROBE_MANUALLY
8 years ago
fcadc7bb1a
Implement the "manual" option for ABL
8 years ago
9e22184936
Add a "manual" option for ABL
8 years ago
541165e878
Merge pull request #6181 from thinkyhead/rc_ubl_further_fixes
...
Further adjustments to UBL code
8 years ago
b19a15fa7f
Within applied to UBL
8 years ago
342ee458ae
Additional UBL fixes, optimizations
8 years ago
a5e085cbea
Have run_probe() return probe Z, not nozzle Z
8 years ago
4487d22d56
Apply FIXFLOAT macro
8 years ago
6cac0f43eb
MBL fiddle
8 years ago
25a6bfa7ed
Add and apply WITHIN macro
8 years ago
81136c1e82
Merge pull request #6177 from thinkyhead/rc_tinyboy
...
Support for TinyBoy 2 3D printer (and its OLED display)
8 years ago
93aad54dc1
Clean up code, remove _now command function
8 years ago
6ba6c92a81
Add example configuration for TinyBoy L10/L16
...
The TB2 is a Indiegogo funded 3d printer. It uses a MKS SMELZI V1.0
main board (based on MELZI, i.e. Sanguinololu). I comes as a complete kit,
including display and panel.
Two variants exists, L10 and L16, with a height of 100 and 160 mm.
The heating function of the provided bed can enabled by soldering a
thermistor and some wires to it.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
8 years ago
0fe57ad4f5
Add Support TinyBoy2 OLED/Encoder panel
...
The OLED is driven by an SSD1306, connected to the board via
I2C, the rotary encoder is connected to 3 GPIO pins.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
8 years ago
65ca6472ba
Make G26 compatible with G92 and M206
8 years ago
4902fd4e95
More data in UBL class, make it a static class
...
- Make all `unified_bed_leveling` data/methods static
- Move some UBL-related variables into the class
- Replace `map_[xy]_index_to_bed_location` with `mesh_index_to_[xy]pos`
8 years ago
edbc024d76
Disable UBL_G26_MESH_EDITING by default
8 years ago
9e4bd6b3b5
Further repairs to UBL, comments, spacing
8 years ago
f3618c3337
Reduce UBL RAM usage by making G26/G29 optional
8 years ago
c9eb1d6ab7
Make MBL a static class, use lookup for index-to-point conversion
8 years ago
de9d2cddc3
Merge pull request #6152 from thinkyhead/rc_cleanup_6150_etc
...
UBL cleanup, optimization
8 years ago
9217e4b8ec
Various UBL cleanups and bug fixes
8 years ago
9924199802
Merge pull request #5908 from thinkyhead/rc_fix_slowdown
...
General minor cleanup
8 years ago
0e71e7b2fb
Cleanup to planner.cpp
8 years ago
f105cad43c
Marlin: Slight cleanup to Marlin_main.cpp
8 years ago
499f9e04e1
Marlin: Temperature soft-PWM cleanup
8 years ago
7ddd94dc61
Merge pull request #5994 from StefanBruens/fix_Makefile_errors
...
Fix makefile errors, cleanup
8 years ago
af09095f03
Merge pull request #6154 from thinkyhead/rc_fil_sensor_vs_sd
...
Show Filament Width on LCD when SD is disabled
8 years ago
d38b1bc4b1
Show filament width sensor values in LCD constantly if SD card support is not enabled.
8 years ago
e3459ec178
Merge pull request #5989 from MagoKimbra/rc_fix_delta_angles
...
Fix delta_angles
8 years ago
f49aec057f
Tweak "can not" => "can't" in RUMBA pins
8 years ago
0a23a1bb3b
Dynamic feedrate on SCARA, converting target mm/s to deg/s
8 years ago
d8724bb546
Get G29's P1 (Automated Probing) working again.
...
Incorrect optimizations of data types and ternary operators caused some
issues.
8 years ago
c7f6ee9c93
Board A4JP should be SCOOVO_X9H
8 years ago
a9fc30ae2e
Use safe_delay to ensure watchdog reset
8 years ago
171904b6c7
Make G29 What command print reliably and fix G29 P1 bug Waldo found
8 years ago
9d3ac66f73
Map clean up of UBL
...
UBL's maps are cleaner. And with a 1 value, G29 O 1 will generate a
map suitable to be Cut & Pasted into Excel so a Suface Map can be
generated.
8 years ago
9a1949a91e
Cleaned up G26 ready to replace existing one at MarlinFirmware/Marlin
8 years ago
aec85ad45a
Start of process to get UBL running again.
...
The wait_for_user change totally broke UBL. But there is stuff wrong
now in the thermal code and/or LCD Panel code.
8 years ago
b47eaf14ae
Merge pull request #6109 from thinkyhead/rc_soft_pwm_dither
...
PWM dithering followup
8 years ago
34d1c41b5f
Merge pull request #6111 from benlye/benlye-patch-echo_command
...
Fix type conversion issue with echo_command
8 years ago
6a601aca35
Fix type conversion issue with echo_command
...
With the the current definition of echo_command I cannot compile RCBugFix (Arduino IDE 1.8.1) with the error "invalid conversion from 'const char*' to 'char*'". This change resolves that.
8 years ago
009a6ddd39
Adjust bilinear grid in M851
8 years ago
eab7854a73
Merge pull request #6074 from thinkyhead/rc_immediate_shove
...
Immediate commands take precedence
8 years ago
5699e2b881
Add SOFT_PWM_DITHER to other configurations
8 years ago
5a2abeca78
Merge pull request #6100 from thinkyhead/rc_soft_pwm_dither
...
Enhancement of PWM, with dithering
8 years ago
043be2856b
Use "& 0x3F" instead of "% 64"
8 years ago
6a040a6967
SOFT_PWM: Do not switch off heaters twice on pwm_count wraparound
...
After wraparound, pwm_count <= pwm_mask holds, thus soft_pwm_X <= pwm_count
guarantees soft_pwm_X < pwm_mask is true, and the heater will be switched
off in the first branch.
Do not evaluate the pwm conditions a second time, this reduces the
instruction count (4 instructions per PWM) and text size (6 byte).
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
8 years ago
0a74774af1
soft_pwm: avoid useless refetches of pwm_count
...
The compiler is not able to reuse the value of pwm_count, but reloads it
on every evaluation, if is stored in a static variable, as it cannot prove
it will be unchanged. A variable with local scope may not be modified from
the outside, so its value can be reused.
Doing so reduces text size and instruction count.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
8 years ago
35a55d5757
SOFT_PWM: Implement dithering if SOFT_PWM_SCALE is 1 or more
...
If dithering is enabled, the remainder of the soft_pwm_X duty value at
turnoff time is added to the next cycle. If e.g. the duty is set to 9 and
SCALE is set to 2, the PWM will be active for 8 counts for 3 cycles and
12 counts on each fourth cycle, i.e. the average is 9 cycles.
This compensates the resolution loss at higher scales and allows running
fans with SOFT_PWM with significantly reduced noise.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
8 years ago
2aed66a955
temperature: Fix SOFT_PWM off by one
...
A 128 step PWM has 127 intervals (0/127 ... 127/127 duty). Currently, a
PWM setting of 1/127 is active for 2/128, i.e. double the expected time,
or, in general n+1/128 instead of n/127.
Fixes issue#6003.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
8 years ago
b5711a99a2
Patches to bring UBL closer to compliance
8 years ago
d076c1b604
Apply some general cleanup to code
8 years ago
d1e6b0e21a
Reduce STEP_PULSE_CYCLES code slightly
8 years ago
783338a0b8
Add UBL_MESH_EDIT_ENABLED to configs
8 years ago
8d54ffbf05
Adjust vector_3 code with const, some optimization
8 years ago
8ee2612ebb
The hex nibble routine can print again!
...
The code to print a hex nibble got broke. SERIAL_ECHO( (char) ) isn't
suitable for its use.
8 years ago
b8e4a6970b
Get UBL up and running again
...
All the changes to get the code into compliance with Marlin coding
standards made UBL sick. This pretty much gets UBL back up and
running.
8 years ago
5de1da2b3c
Make UBL honor the #define ENABLE_LEVELING_FADE_HEIGHT option
8 years ago
8f9face956
Merge pull request #6088 from rafaljot/patch-3
...
Update Marlin_main.cpp
8 years ago
782634b6c9
Merge pull request #6081 from Sebastianv650/MIN_STEPPER_PULSE_for_Babystepping
...
Add MINIMUM_STEPPER_PULSE ability to babystepping
8 years ago
af2ea23e9c
EXTRUDER_RUNOUT_PREVENT uses buffer_line_kinematic
8 years ago
cd882b88db
#if defined => #ifdef / PIN_EXISTS
8 years ago
e244399766
Additional cleanup of UBL code
8 years ago
0934563b97
G38 optional double touch
...
Made the double touch portion a conditional compile based on the
PROBE_DOUBLE_TOUCH flag.
==============================================
Bugfix
The current G38 only stopped a move if it involved the Z axis.
Moved all the G38 code to it's own section and put it where it would
always be executed no matter what axis was moving or if the endstop was
enabled.
Also added a comment to configuration_adv to alert the user the double
tap had to be turned on.
==============================================
Change G38 back to using Z_MIN_PROBE
There's no Z_MIN endstop if Z_DUAL_ENDSTOPS is enabled and you have them
set to the top of the gantry.
G38 started out as using the Z_MIN_PROBE pin. I don't remember why we
changed it to the Z_MIN endstop.
8 years ago
cc3204509c
UBL patch from Bob-the-Kuhn
8 years ago
b904b5ae8d
Audible feedback for settings store/load/reset
8 years ago
bf57eb2447
Protect Babystepping against other ISRs
...
Especialy against stepper ISR.
This is even more important when a minimum pulse width is set,
increasing the runtime of a babystep.
8 years ago
80830919dc
Add MINIMUM_STEPPER_PULSE ability to babystepping
8 years ago
6da949bbf0
Update Marlin_main.cpp
...
Sometimes after killing heaters are still on.
8 years ago
72f7b14e66
Make G29's Interactive Mesh Editor Work
8 years ago
3fd74b121f
Get G29's Interactive Mesh Editor running
...
G29 P4 R O should work now.
8 years ago
1d58558bec
Spelling fix
8 years ago
2573f4dd05
Merge pull request #6052 from thinkyhead/rc_lift_on_pause
...
Add PARK_HEAD_ON_PAUSE feature / M125
8 years ago
48c6284c91
Immediate commands take precedence
8 years ago
76c270fdf2
Allow FWRETRACT with UBL Enabled
...
The retraction flag in UBL's G26 was conflicting with the FWRETRACT option.
All fixed!
8 years ago
c377c59d47
Allow G29 P1 R to generate the mesh
...
Fix the logic change that happened when UBL got merged.
8 years ago
ff0dd162b7
PARK_HEAD_ON_PAUSE implementation
8 years ago
26473cab6d
Add PARK_HEAD_ON_PAUSE feature
8 years ago
4cf51157b3
Use XYZE rather than NUM_AXIS
8 years ago
4c7f14752a
Add disable_e_steppers function
8 years ago
8eb29f91e6
Patch filament change options and beep code
8 years ago
56c9dfc83b
Merge pull request #6066 from thinkyhead/rc_felix_fix
...
Update Felix config for UBL
8 years ago
9b2b53f63a
Merge pull request #6042 from thinkyhead/rc_fix_toolchange_z
...
Move Z last in tool-change for SWITCHING_EXTRUDER
8 years ago
f98fb6b38e
Update Felix config for UBL
8 years ago
7cabe81373
Merge pull request #6057 from thinkyhead/rc_followup_6054
...
Followup 6054 with some cleanup
8 years ago
4bca27ab89
Fix Kelvin conversion
...
Thanks to @ospalh -- #6056
8 years ago
143ab8f329
Remove Roxy's personal configurations
8 years ago
2512871a36
Patch configs UBL followup
8 years ago
27b5666e15
Move Allen Key probe definition to the top
8 years ago
77cf648ed3
Move menu selection past static items in 1 screen
8 years ago
2c630a1b5c
Merge pull request #6054 from thinkyhead/rc_ubl_renewal
...
UBL for RCBugFix — cleanup, rebase, patch
8 years ago
0492a3a8f1
Merge pull request #6027 from Bob-the-Kuhn/add_kill_info
...
Message for every KILL and STOP
8 years ago
6618346148
Patches to work around "register spill" compiler bug
8 years ago
be7dd90382
Add Thermistor 75: MGB18 silicon pad
8 years ago
b0a9c82c31
Fix single-char echo and pinMode usage
8 years ago
fb60aa3736
UBL implementation
8 years ago
238b8fd2a3
UBL core and support files
8 years ago
cf94688925
Univeral Bed Leveling - configuration
8 years ago
03aa424ccb
Merge pull request #6053 from thinkyhead/rc_clean
...
Remove extraneous whitespace
8 years ago
af644871bf
Merge pull request #6045 from thinkyhead/rc_remove_raw_kinematics
...
Remove delta optimization concepts… for now
8 years ago
77491dd924
Remove extraneous whitespace
8 years ago
b865b21d32
Can't use Z fade height with DELTA
8 years ago
1e57b0c269
Remove delta interpolation concept
8 years ago
e46898f8e5
Remove kinematic optimizations
8 years ago
11f1fdfab4
_lcd_level_bed_position => manual_probe_index
8 years ago
0e410c9dfd
Software endstop options as simple switches
8 years ago
d01b915085
Implement soft_endstops_enabled for clamping
8 years ago
e4649c9044
Add HAS_SOFTWARE_ENDSTOPS macro
8 years ago
3e927ff204
Replace MBL Z hacking
8 years ago
4e53124681
Merge pull request #6039 from Bob-the-Kuhn/M114-sync-with-stepper
...
M114 - wait for move completion before reporting position
8 years ago
734f9ea133
Merge pull request #6040 from thinkyhead/rc_sanity_use_assert
...
Simplify some sanity checks with static_assert
8 years ago
f02af83d42
Remove some extraneous spaces
8 years ago
672e45652e
Improved solution to tool-change bug
8 years ago
23f1cfb46f
Fix stuck CHDK pin as suggested in #6041
8 years ago
0b22069e82
Merge pull request #6021 from Bob-the-Kuhn/BUG-FIX--Switching-extruder-tool-change-Z-height
...
Bug Fix: Switching extruder tool change leaves Z in wrong position
8 years ago
e7e4500629
Simplify some sanity checks with static_assert
8 years ago
34ff0c3439
M114 - wait for move completion before reporting position
8 years ago
b31604a492
Message for every KILL and STOP
...
No more mystery halts & resets
Moved messages to language.h
Added current command to inactive timeout message
8 years ago
13b44d019b
Update language_de.h
...
Addition of missing strings to match language_en.h
8 years ago
685ed5393a
Bug Fix: Switching extruder tool change leaves Z in wrong position
...
The tool_change function saves the current_position to the destination
array soon after starting. Later in the switching extruder section, the
destination array is modified when moving the Z axis up & down. A later
section of tool_change moves the head back to the “original location”
using the destination array. This later section assumes that the
destination array hasn’t been modified.
The fix is to save the destination Z position and then restore it after
the Z movements have completed.
Going back to using the current_position array for the switching
extruder Z axis moves (and leaving the destination array untouched)
doesn’t fix the problem.
This bug was introduced by the “Make tool_change kinematic compatible”
commit # 847429eff4
8 years ago
51353f8fea
Merge pull request #6000 from trivalik/NoWorkspaceWarning
...
prevent warning with define of NO_WORKSPACE_OFFSETS
8 years ago
a4a9bd8bc9
Fix BUG set_position_mm
...
Set postion must have axis and not E_AXIS + active_extruder.
8 years ago
71ac6f9d42
prevent warning with define of NO_WORKSPACE_OFFSETS
8 years ago
9ba6c051a1
Makefile: add nozzle.cpp too CXXSRC list
...
The file is required by the optional NOZZLE_PARK_FEATURE.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
8 years ago
9cc8d495b8
Makefile: remove no longer existing search paths
...
ArduinoAddons has been removed from Marlin, remove any references to it.
Replace HARDWARE_SRC and HARDWARE_DIR with its expanded equivalents.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
8 years ago
bf563e62c1
Makefile: add printcounter.cpp too CXXSRC list
...
The file is required by the optional PRINTCOUNTER feature.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
8 years ago
ddecc1441d
Makefile: Fix linker error
...
Instantiation of the static singleton instance thermalManager in general
requires locking, but we know its safe to do without.
Add -fno-threadsafe-statics to avoid using locking primitives, which
result in linking errors:
undefined reference to `__cxa_guard_acquire'
undefined reference to `__cxa_guard_release'
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
8 years ago
37a26dfc09
Fix delta_angles
8 years ago
2defb1d748
Use SET_INPUT_PULLUP where appropriate
8 years ago
58b3e98878
Use arrays for delta tower parameters
8 years ago
47242a40bb
Apply updated changes for delta_tower_angle_trim
8 years ago
00b6b3da79
Added support for delta tower angle corrections.
8 years ago
5a456c832a
Apply TMC2130 to example configurations
8 years ago
45f949d833
TMC2130 Library: @teemuatlut replaces @makertum
8 years ago
33f8a8a344
Merge pull request #5973 from thinkyhead/rc_circle_pattern
...
Add circle pattern to nozzle clean
8 years ago
94b3e0a483
Merge pull request #5959 from benlye/benlye-fixm48
...
Remove extra carriage return in M48 V1 output
8 years ago
a9a1971295
Merge pull request #5972 from thinkyhead/rc_cooldown_before
...
Fix preheat menu formatting
8 years ago
6aa81255a9
Patch and clean up "flsun" kossel. Followup to #5911 .
8 years ago
b2270b3f3e
Apply prior nozzle clean update
8 years ago
7698c5617a
Added circle nozzle cleaning parameters to example configurations
8 years ago
6836b94eea
Added circle pattern for nozzle cleaning feature
8 years ago
3b75518ef6
Merge pull request #5911 from aphex3k/flsun_kossel_mini
...
Configuration.h and Configuration_adv.h for the kossel mini by flsun
8 years ago
3830778852
Apply NO_WORKSPACE_OFFSETS to lcd menu
8 years ago
7e3aab889d
Fix preheat menu formatting
8 years ago
fea0d3f20f
Endstop and temp-isr general cleanup
8 years ago
aef08e8780
Compact some macro substitutions
8 years ago
2f620f86d9
Merge pull request #5970 from thinkyhead/rc_cooldown_before
...
Preheat Hotend Only menu items
8 years ago
02de8e6f18
Merge pull request #5957 from MagoKimbra/rc_stepper_indirection_fix
...
Stepper indirection fix tmc driver
8 years ago
6c5312559c
Menu item to preheat only the hotend
8 years ago
9d0142e8ae
Move Change Filament above Cooldown
8 years ago
0c55095c5e
Move Cooldown above Preheat
8 years ago
c15c65f18a
Merge pull request #5971 from thinkyhead/rc_fix_e_factors
...
Patch DISTINCT_E_FACTORS bug
8 years ago
bfb0007573
Patch DISTINCT_E_FACTORS bug
8 years ago
be98016674
Merge pull request #5963 from thinkyhead/rc_no_offsets_optim
...
New option: NO_WORKSPACE_OFFSETS
8 years ago
8e89a802f7
Document PROTOCOL_VERSION
8 years ago
87b03b16bd
Use a macro for array copies
8 years ago
e141f3a03f
Optimize coordinate transformation
...
Pre-compute the combined position shift and home offset to save a
single float fetch-and-add per conversion. Great for delta/scara and
bed leveling.
8 years ago
5f7e85398b
Implement NO_WORKSPACE_OFFSETS
8 years ago
05abe853f9
New option: NO_WORKSPACE_OFFSETS
8 years ago
20addc6e32
Merge pull request #5955 from thinkyhead/rc_eeprom_fail_better
...
Display a message for EEPROM version mismatch
8 years ago
dead89062a
Update Marlin_main.cpp
...
Remove unnecessary line break from M48 V1 output.
8 years ago
ae277aebc6
Stepper indirection fix tmc driver
8 years ago
8f4e4b1995
Display a message for EEPROM version mismatch
8 years ago
177ad245f6
Merge pull request #5953 from thinkyhead/fix_fc_e_index
...
Fix submenu hotend status display
8 years ago
cea3ea772c
Fix submenu hotend status display
8 years ago
b27f69ba51
Merge pull request #5813 from thinkyhead/rc_fix_makrpanel
...
Fix MAKRPANEL assignments
8 years ago
1ef6ccd919
Merge pull request #5951 from thinkyhead/rc_print_2d_array
...
Reduce code size (40b, or 166b with bilinear subdivision)
8 years ago
53f5086905
Fix MAKRPANEL assignments
...
MAKRPANEL is a DOGLCD+ULTRA_LCD+NEWPANEL so customize its pins within
that block.
8 years ago
98c7b682ca
General cleanup, const usage, var naming
8 years ago
369bfc8a1e
Reduce code size (40b, or 166b with bilinear subdivision)
8 years ago
0d13412105
Fix "Heating..." message
8 years ago
5065636023
Merge pull request #5934 from thinkyhead/rc_advance_ed_ratio
...
LIN_ADVANCE: Fixed E/D ratio option
8 years ago
75ad82baab
Update Catalan language
8 years ago
34253497d4
Babysteps code tweak
...
As suggested by https://github.com/MarlinFirmware/Marlin/pull/5887#issuecomment-283832163
8 years ago
fb4aead2b1
Clean up and finish #5887
8 years ago
b3e2bd6f29
Reduce E_D_ratio code
8 years ago
de6c40ed8f
Add option to fix E/D ratio
...
Work around for slicers producing buggy gcode.
8 years ago
eeb490221f
Remove BEEPER_PIN override in pins_RIGIDBOARD.h
...
Resolves #5926 . This override is no longer needed since the RAMPS LCD controller pins were fixed.
8 years ago
11e892bd84
Merge pull request #5887 from Roxy-3D/RCBugFix
...
Double Click of Encoder Wheel Jumps to Z-BabyStepping
8 years ago
cbeff12f8a
Merge pull request #5933 from teemuatlut/lcd_days_hours
...
Fix formatting of SD print time hours above one day
8 years ago
8a4e9d08a3
Merge pull request #5931 from thinkyhead/rc_core_endstop_fix
...
Fix CoreYX / YZ / ZX endstop logic
8 years ago
9175d16660
Fix formatting of print time hours above one day
8 years ago
b6d9eb229f
Extend Core endstop commentary
8 years ago
c5e08e8761
CoreYX/YZ/ZX needs different endstop logic than CoreXY/YZ/XZ
...
In the endstop testing section, add the "reverse" logic in addition to "normal" core handling.
In CoreXY/YZ/XZ steppers rotating the same direction gives X movement. Opposing directions produces Y movement.
In CoreYX/ZY/ZX this is reversed. Same = Y, Opposite = X.
----
Fixes the issue where the Y endstop was being checked when moving in the X direction, etc.
8 years ago
c759c26cca
Make LCD_TIMEOUT_TO_STATUS configurable
...
As suggested in
https://github.com/MarlinFirmware/Marlin/issues/5570#issuecomment-283059
065
8 years ago
47729918fc
enable ENSURE_SMOOTH_MOVES
8 years ago
330b981912
created Configuration.h and Configuration_adv.h for the kossel mini sold by flsun
8 years ago
48b7e0f8d8
Nozzle Wipe Vertical Zig-Zag
...
- Add configuration support for zigzags in either the X or Y axis, for
wipe pads significantly longer in one dimension.
- Add configuration for default number of zig-zag triangles, vs. a
magic number in `Marlin_main.cpp`.
- Update description of auto nozzle wiping to match functionality
8 years ago
f17b81b765
Add MAPPER_C2C3 to French language
8 years ago
7e607b06eb
Better comments on DOUBLE_CLICK_TIME_WINDOW
8 years ago
34cba42104
Use PSTR for MSG_HEATING
8 years ago
584d147a02
fixup the indentation
8 years ago
e443e0e2a9
Fix scoping issues for double click to Z-Babystepping
8 years ago
17d1cd7c09
Double Click of Encoder Wheel Jumps to Z-BabyStepping
8 years ago
48d862377a
Double Click of Encoder Wheel Jumps to Z-BabyStepping
8 years ago
cfdc189796
Merge pull request #5856 from thinkyhead/rc_fix_bad_comment
...
Remove non-applicable comment on MANUAL_Z_HOME_POS
8 years ago
cd68380ce6
Add status_printf to print messages to the lcd status line.
...
Also add a hotend indicator to the heating message displayed on the lcd status line.
8 years ago
012aff6823
Merge pull request #5862 from thinkyhead/rc_fix_a_thing
...
Finish reducing of ABL_BILINEAR_SUBDIVISION
8 years ago
b9187020c4
Finish reducing of ABL_BILINEAR_SUBDIVISION
8 years ago
e282b72151
Remove non-applicable comment on MANUAL_Z_HOME_POS
8 years ago
57f92a4632
Apply DISTINCT_E_FACTORS to sync_from_steppers
...
Followup to #5840
8 years ago
4da8b1494b
Merge pull request #5854 from thinkyhead/rc_fixup_m600
...
M600 cleanup and bugfix
8 years ago
dd02dba6e6
Merge pull request #5840 from MagoKimbra/rc_fix_lin_advanced_step_to_mm
...
Fix steps_to_mm for active extruders
8 years ago
6e0b3fcc08
Optimize M600 heater status LCD items
8 years ago
44b4e116bd
Commentary / style in gcode_M600
8 years ago
561904345f
Tweak config ordering for M600
8 years ago
284d6de9da
Remove some old code comments
8 years ago
3685224c1a
Fix steps_to_mm for active extruders
8 years ago
4578c573fe
Pause the print job timer while in M600
8 years ago
bfe6f71794
Simplify filament_change_beep function
8 years ago
8289ea1316
Use a short name for the filament "endstop"
8 years ago
d9dcef8a87
Spacing, coding standards
8 years ago
931914e679
Apply M600 updates to all configs
8 years ago
8bf0b496b9
Improve M600 with timeout, wait for heatup.
8 years ago
c40fe2113c
Fix for broken MBL
...
LCD call was waiting forever, causing the system to hang.
8 years ago
4d4745c0eb
Parenthesize some menu defines for safety
8 years ago
47f9883b0f
Dynamic allocation for SDCARD_SORT_ALPHA
8 years ago
a561bd5e3a
New feature: SDCARD_SORT_ALPHA
8 years ago
c04d6b5aa6
Merge pull request #5829 from thinkyhead/rc_fix_isr_reentry
...
Combine fixes for LIN_ADVANCE and temperature ISR
8 years ago
467f01435f
Merge pull request #5816 from thinkyhead/rc_abl_virt_reduce
...
Reduce memory use by ABL_BILINEAR_SUBDIVISION slightly
8 years ago
97b6fb6381
Reduce / optimize LIN_ADVANCE code
8 years ago
271ced7341
Prevent re-entering of temperature ISR
...
If Marlin is inside the temperature ISR, the stepper ISR is enabled. If
a stepper event is now happening Marlin will proceed with the stepper
ISR. Now, at the end of the stepper ISR, the temperatre ISR gets enabled
again. While Marlin proceed the rest of the temperature ISR, it's now
vulnerable to a second ISR call.
8 years ago
1b59766fcb
Cleanup position_float
...
Hopefully fixes Marlin #5481
8 years ago
a950c31e2d
Merge pull request #5815 from thinkyhead/rc_pulses_per_step
...
Give encoder pulse/steps conditionals their own block
8 years ago
7176de8605
Merge pull request #5814 from thinkyhead/hotend_loop_always
...
Make HOTEND_LOOP more consistent, let compiler optimize it
8 years ago
adec219ca5
Merge pull request #5811 from thinkyhead/fix_two_strings
...
No space after X: or A: in M114 output
8 years ago
eaa829b58c
Reduce memory use by ABL_BILINEAR_SUBDIVISION slightly
8 years ago
1c99ca82d8
Give encoder pulse/steps conditionals their own block
8 years ago
e44294bb4d
Make HOTEND_LOOP more consistent, let compiler optimize it
8 years ago
701f4a6d9d
Merge pull request #5729 from Bob-the-Kuhn/guaranteed-BLTouch-detection
...
guaranteed BLTouch detection
8 years ago
c15b9a6a06
No space after X: or A: in M114 output
8 years ago
e1702816f6
Fix SD_CHECK_AND_RETRY condition
...
Addressing #5806
8 years ago
1bc5be3bdf
Cast DELTA_PRINTABLE_RADIUS to float in sq()
...
Addressing #5625
8 years ago
0369f97ec1
guaranteed BLTouch detection
...
To guarantee that the 5mS pulse from a BLTouch is recognized you need to
have the endstops.update() routine run twice in that 5mS period.
At 200 steps per mm, my system has problems below a feedrate of 120 mm
per minute.
Two things were done to guarantee the two updates within 5mS:
1) In interrupt mode, a check was added to the temperature ISR. If the
endstop interrupt flag/counter is active then it'll kick off the endstop
update routine every 1mS until the flag/counter is zero. This
flag/counter is decremented by the temperature ISR AND by the stepper
ISR.
2) In poling mode, code was added to the stepper ISR that will make sure
the ISR runs about every 1.5mS. The "extra" ISR runs only check the
endstops. This was done by grabbing the intended ISR delay and, if it's
over 2.0mS, splitting the intended delay into multiple smaller delays.
The first delay can be up to 2.0mS, the next ones 1.5mS (as needed) and
the last no less than 0.5mS.
=========================================
BLTouch error state recovery
If BLTouch already active when deploying the probe then try to reset it
& clear the probe.
If that doesn't fix it then declare an error.
Also added BLTouch init routine to startup section
8 years ago
1e4d4e5915
Fix typo in language_uk
...
Thanks to @pavlus for this one
8 years ago
7fe7a0c8be
Merge pull request #5793 from thinkyhead/rc_adjust_probe_output
...
Adjust probe_pt() terminal output to respect probe z-offset
8 years ago
633c253bc1
Merge pull request #5792 from thinkyhead/rc_default_dac_vals
...
Default DAC values for RigidBoard V2
8 years ago
7bbc31704c
Adjust probe_pt() terminal output to respect probe z-offset
8 years ago
a245656db3
Merge pull request #5713 from gege2b/RCBF-French
...
French translation : Added missing strings as well as missing accents
8 years ago
713931338a
Default DAC values for RigidBoard V2
8 years ago
ae706233a8
pinsDebug for 644/1284 & USB646/1286 families
...
added conditional compilation for PWMs 1C & 3C
add Teensyduino compatibility
==========================================
changes per review - minor formatting changes
1) remove non-printable character at the end of line 687
2) split a really long comment into two lines
3) got rid of some trailing spaces
============================================
Made pinsDebug_Teensyduino.h the same between this PR and PR 5668 which
is for a re-written pinsDebug.h file.
The changes were:
1) added copyright @ GNU license header
2) a blank line crept in.
8 years ago
22dfcc9a71
French translation : Added missing strings as well as missing accents
8 years ago
9b5515926a
Merge pull request #5696 from thinkyhead/rc_volumetric_default
...
Allow enabling volumetric filament on config load
8 years ago
0d147ead66
Allow enabling volumetric filament on config load
8 years ago
fa26767efe
Replace all remaining 'boolean' with 'bool'
8 years ago
f6858d9974
Fix M110 without leading N
...
Store N in the right variable.
This is too rarely used.
"mea culpa, mea culpa, mea maxima culpa"
8 years ago
0c0c840ba8
Merge pull request #5683 from emartinez167/EMartinez-Changes
...
Updates to some incorrectly ended strings in the Spanish translation
8 years ago
25dae3bccc
Update language_de.h
...
Small corrections
8 years ago
7292145f4e
Fix for some wrong strings
...
On last commit, some strings were ended with the incorrect character.
This fixes it.
8 years ago
93a9aa6b76
Merge pull request #5682 from thinkyhead/rc_spanish_jan
...
Updates to Spanish language
8 years ago
7a9c1a279b
Merge pull request #5681 from thinkyhead/rc_prevent_boot_loop
...
Reset watchdog in SD init to prevent reboot
8 years ago
e409c7f9e8
Merge pull request #5645 from esenapaj/From-microseconds-to-milliseconds
...
From "microseconds" to "milliseconds"
8 years ago
020c6af7b0
Updates to Spanish language
...
Add missing Spanish language definitions.
8 years ago
d29cc8f7bc
Reset watchdog in SD init to prevent reboot
...
If the watchdog is enabled and bootscreen + SD card checks take too long, Marlin may hang at boot time because of the reset loop. We have this happen all the time with the Anet board if no SD card is inserted.
8 years ago
7743849608
Merge pull request #5680 from thinkyhead/rc_configs_puhlease
...
code_value_float tweak
8 years ago
16357fbfdf
Merge pull request #5619 from Ocarthon/RCBugFix
...
Disable SD Detect for K8400
8 years ago
e57c0fce66
Move MOSFET changes above #include for RIGIDBOARD
...
Correction to #5629
8 years ago
c376f6a2cb
code_value_float tweak
8 years ago
fb3c30e24c
Fix lcd_wait_for_homing causing menu to block
...
As a showcase function for how to do waiting in the lcd menu, this function should be preserved.
8 years ago
f8ae0fd29f
Merge pull request #5647 from manianac/RCBugFix-PrepareMenuFix
...
Fix empty Prepare menu
8 years ago
aab5118c6a
Remove error causing break command
...
Use index macro instead of e
8 years ago
d38e335272
From "microseconds" to "milliseconds"
...
delay() is milliseconds
8 years ago
8ae2bc7e2e
Disable SD Detect for K8400
8 years ago
4061fca1ad
Sanity checks for FILAMENT_CHANGE_FEATURE and FILAMENT_RUNOUT_SCRIPT
8 years ago
5ab7b91615
Comment on filament runout sensor config
8 years ago
922c67f17d
Merge pull request #5588 from thinkyhead/rc_remove_biv25
...
Drop biv2.5 delta configurations
8 years ago
8c6c048551
drop biv2.5 delta configurations
8 years ago
92dbeebf40
Define ADV_NEVER, ADV_RATE
8 years ago
306c184b1a
Allow M600 when dryrun debugging
8 years ago
fe2ea2906f
Merge pull request #5573 from thinkyhead/rc_unify_stepper_isr
...
LIN_ADVANCE with unified stepper ISR
8 years ago
84c685f8b5
First draft of Unified Stepper / E Advance ISR
8 years ago
83021d82c6
Merge pull request #5502 from AnHardt/symbol-strings
...
Add symbol-strings
8 years ago
036eccfd6e
Merge pull request #5572 from Kaibob2/patch-5
...
Update language_de.h
8 years ago
b794b76836
Merge pull request #5567 from AnHardt/fix5194
...
Fix 5194
8 years ago
Scott Lahteine