Patch configs comment formatting

Marlin/Configuration_adv.h

@@ -419,10 +419,10 @@
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
 //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
-/*  5DPRINT & AZTEEG_X3_PRO */
-//#define DIGIPOT_I2C  // uncomment to enable
+// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
+//#define DIGIPOT_I2C
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
-/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
+// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
 
 //===========================================================================

Marlin/example_configurations/Cartesio/Configuration_adv.h

@@ -419,10 +419,10 @@
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
 //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
-/*  5DPRINT & AZTEEG_X3_PRO */
-//#define DIGIPOT_I2C  // uncomment to enable
+// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
+//#define DIGIPOT_I2C
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
-/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
+// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
 
 //===========================================================================

Marlin/example_configurations/Felix/Configuration_adv.h

@@ -419,10 +419,10 @@
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
 //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
-/*  5DPRINT & AZTEEG_X3_PRO */
-//#define DIGIPOT_I2C  // uncomment to enable
+// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
+//#define DIGIPOT_I2C
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
-/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
+// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
 
 //===========================================================================

Marlin/example_configurations/Hephestos/Configuration_adv.h

@@ -419,10 +419,10 @@
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
 //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
-/*  5DPRINT & AZTEEG_X3_PRO */
-//#define DIGIPOT_I2C  // uncomment to enable
+// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
+//#define DIGIPOT_I2C
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
-/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
+// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
 
 //===========================================================================

Marlin/example_configurations/Hephestos_2/Configuration_adv.h

@@ -420,10 +420,10 @@
 
 //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
-/*  5DPRINT & AZTEEG_X3_PRO */
-//#define DIGIPOT_I2C  // uncomment to enable
+// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
+//#define DIGIPOT_I2C
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
-/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
+// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
 
 //===========================================================================

Marlin/example_configurations/K8200/Configuration_adv.h

@@ -432,10 +432,10 @@
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
 //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
-/*  5DPRINT & AZTEEG_X3_PRO */
-//#define DIGIPOT_I2C  // uncomment to enable
+// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
+//#define DIGIPOT_I2C
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
-/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
+// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
 
 //===========================================================================

Marlin/example_configurations/K8400/Configuration_adv.h

@@ -419,10 +419,10 @@
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
 //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
-/*  5DPRINT & AZTEEG_X3_PRO */
-//#define DIGIPOT_I2C  // uncomment to enable
+// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
+//#define DIGIPOT_I2C
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
-/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
+// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
 
 //===========================================================================

Marlin/example_configurations/RigidBot/Configuration_adv.h

@@ -419,10 +419,10 @@
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
 //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
-/*  5DPRINT & AZTEEG_X3_PRO */
-//#define DIGIPOT_I2C  // uncomment to enable
+// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
+//#define DIGIPOT_I2C
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
-/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
+// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
 
 //===========================================================================

Marlin/example_configurations/SCARA/Configuration_adv.h

@@ -419,10 +419,10 @@
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
 //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
-/*  5DPRINT & AZTEEG_X3_PRO */
-//#define DIGIPOT_I2C  // uncomment to enable
+// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
+//#define DIGIPOT_I2C
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
-/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
+// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
 
 //===========================================================================

Marlin/example_configurations/TAZ4/Configuration_adv.h

@@ -427,10 +427,10 @@
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
 //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
-/*  5DPRINT & AZTEEG_X3_PRO */
-//#define DIGIPOT_I2C  // uncomment to enable
+// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
+//#define DIGIPOT_I2C
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
-/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
+// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
 
 //===========================================================================

Marlin/example_configurations/TinyBoy2/Configuration_adv.h

@@ -400,11 +400,11 @@
 // Motor Current controlled via PWM (Overridable on supported boards with PWM-driven motor driver current)
 //#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps
 
-// uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
+// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
 //#define DIGIPOT_I2C
 // Number of channels available for I2C digipot, For Azteeg X3 Pro we have 8
 #define DIGIPOT_I2C_NUM_CHANNELS 8
-// actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
+// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}
 
 //===========================================================================

Marlin/example_configurations/WITBOX/Configuration_adv.h

@@ -419,10 +419,10 @@
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
 //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
-/*  5DPRINT & AZTEEG_X3_PRO */
-//#define DIGIPOT_I2C  // uncomment to enable
+// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
+//#define DIGIPOT_I2C
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
-/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
+// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
 
 //===========================================================================

Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h

@@ -311,9 +311,9 @@
   //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
   //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
   //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
-  // Set/get with gcode: M301 E[extruder number, 0-2]
+                                  // Set/get with gcode: M301 E[extruder number, 0-2]
   #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
-  // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
+                                  // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
   #define K1 0.95 //smoothing factor within the PID
 
   // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
@@ -754,7 +754,6 @@
 
 #endif // Z_PROBE_ALLEN_KEY
 
-
 /**
  *
  *   *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
@@ -810,11 +809,10 @@
  *          ignored by Marlin
  */
 
-//#define Z_MIN_PROBE_ENDSTOP // A3K leave disable!
+//#define Z_MIN_PROBE_ENDSTOP // A3K leave disabled!
 #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
 
-
-/* Enable Z Probe Repeatability test to see how accurate your probe is  */
+// Enable Z Probe Repeatability test to see how accurate your probe is
 #define Z_MIN_PROBE_REPEATABILITY_TEST
 
 /**
@@ -834,7 +832,7 @@
 #define Z_CLEARANCE_DEPLOY_PROBE   50 // Z Clearance for Deploy/Stow
 #define Z_CLEARANCE_BETWEEN_PROBES  5 // Z Clearance between probe points
 
-/* For M851 give a range for adjusting the Z probe offset */
+// For M851 give a range for adjusting the Z probe offset
 #define Z_PROBE_OFFSET_RANGE_MIN -20
 #define Z_PROBE_OFFSET_RANGE_MAX 20
 
@@ -959,9 +957,9 @@
  *   leveling in steps so you can manually adjust the Z height at each grid-point.
  *   With an LCD controller the process is guided step-by-step.
  */
-//#define AUTO_BED_LEVELING_3POINT // Only AUTO_BED_LEVELING_BILINEAR is supported for DELTA bed leveling.
-//#define AUTO_BED_LEVELING_LINEAR // Only AUTO_BED_LEVELING_BILINEAR is supported for DELTA bed leveling.
-#define AUTO_BED_LEVELING_BILINEAR // Only AUTO_BED_LEVELING_BILINEAR is supported for DELTA bed leveling.
+//#define AUTO_BED_LEVELING_3POINT
+//#define AUTO_BED_LEVELING_LINEAR
+#define AUTO_BED_LEVELING_BILINEAR
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 

Marlin/example_configurations/delta/generic/Configuration_adv.h

@@ -421,10 +421,10 @@
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
 //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
-/*  5DPRINT & AZTEEG_X3_PRO */
-//#define DIGIPOT_I2C  // uncomment to enable
+// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
+//#define DIGIPOT_I2C
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
-/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
+// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
 
 //===========================================================================

Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h

@@ -421,10 +421,10 @@
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
 //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
-/*  5DPRINT & AZTEEG_X3_PRO */
-//#define DIGIPOT_I2C  // uncomment to enable
+// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
+//#define DIGIPOT_I2C
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
-/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
+// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
 
 //===========================================================================

Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h

@@ -426,10 +426,10 @@
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
 //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
-/*  5DPRINT & AZTEEG_X3_PRO */
-//#define DIGIPOT_I2C  // uncomment to enable
+// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
+//#define DIGIPOT_I2C
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
-/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
+// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
 
 //===========================================================================

Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h

@@ -421,10 +421,10 @@
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
 //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
-/*  5DPRINT & AZTEEG_X3_PRO */
-//#define DIGIPOT_I2C  // uncomment to enable
+// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
+//#define DIGIPOT_I2C
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
-/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
+// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
 
 //===========================================================================

Marlin/example_configurations/makibox/Configuration_adv.h

@@ -419,10 +419,10 @@
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
 //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
-/*  5DPRINT & AZTEEG_X3_PRO */
-//#define DIGIPOT_I2C  // uncomment to enable
+// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
+//#define DIGIPOT_I2C
 #define DIGIPOT_I2C_NUM_CHANNELS 4 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
-// actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
+// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.7, 1.7, 1.7, 1.7 }  // 5DPRINT
 
 //===========================================================================

Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h

@@ -419,10 +419,10 @@
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
 //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
-/*  5DPRINT & AZTEEG_X3_PRO */
-//#define DIGIPOT_I2C  // uncomment to enable
+// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
+//#define DIGIPOT_I2C
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
-/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
+// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
 
 //===========================================================================