microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

Convert config code to a static class

Browse Source
2.0.x
Scott Lahteine 8 years ago
parent 5b9476fe78
commit 786af73e24
4 changed files with 78 additions and 49 deletions
Show Stats Download Patch File Download Diff File

12
Marlin/Marlin_main.cpp
Unescape Escape View File

@ -573,7 +573,7 @@ static uint8_t target_extruder;
endstop_adj[ABC] = { 0 };
// These values are loaded or reset at boot time when setup() calls
// Config_RetrieveSettings(), which calls recalc_delta_settings().
// settings.load(), which calls recalc_delta_settings().
float delta_radius,
delta_tower_angle_trim[ABC],
delta_tower[ABC][2],
@ -7898,28 +7898,28 @@ void quickstop_stepper() {
* M500: Store settings in EEPROM
*/
inline void gcode_M500() {
(void)Config_StoreSettings();
(void)settings.save();
}
/**
* M501: Read settings from EEPROM
*/
inline void gcode_M501() {
(void)Config_RetrieveSettings();
(void)settings.load();
}
/**
* M502: Revert to default settings
*/
inline void gcode_M502() {
(void)Config_ResetDefault();
(void)settings.reset();
}
/**
* M503: print settings currently in memory
*/
inline void gcode_M503() {
(void)Config_PrintSettings(code_seen('S') && !code_value_bool());
(void)settings.report(code_seen('S') && !code_value_bool());
}
#if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
@ -11343,7 +11343,7 @@ void setup() {
// Load data from EEPROM if available (or use defaults)
// This also updates variables in the planner, elsewhere
(void)Config_RetrieveSettings();
(void)settings.load();
#if DISABLED(NO_WORKSPACE_OFFSETS)
// Initialize current position based on home_offset

58
Marlin/configuration_store.cpp
Unescape Escape View File

@ -23,7 +23,7 @@
/**
* configuration_store.cpp
*
* Configuration and EEPROM storage
* Settings and EEPROM storage
*
* IMPORTANT: Whenever there are changes made to the variables stored in EEPROM
* in the functions below, also increment the version number. This makes sure that
@ -152,13 +152,16 @@
* 580 Minimum end-point
* 1901 (580 + 36 + 9 + 288 + 988) Maximum end-point
*/
#include "configuration_store.h"
MarlinSettings settings;
#include "Marlin.h"
#include "language.h"
#include "endstops.h"
#include "planner.h"
#include "temperature.h"
#include "ultralcd.h"
#include "configuration_store.h"
#if ENABLED(MESH_BED_LEVELING)
#include "mesh_bed_leveling.h"
@ -179,7 +182,7 @@
/**
* Post-process after Retrieve or Reset
*/
void Config_Postprocess() {
void MarlinSettings::postprocess() {
// steps per s2 needs to be updated to agree with units per s2
planner.reset_acceleration_rates();
@ -217,12 +220,14 @@ void Config_Postprocess() {
#if ENABLED(EEPROM_SETTINGS)
uint16_t eeprom_checksum;
const char version[4] = EEPROM_VERSION;
bool eeprom_write_error;
uint16_t MarlinSettings::eeprom_checksum;
bool MarlinSettings::eeprom_write_error,
MarlinSettings::eeprom_read_error;
void _EEPROM_writeData(int &pos, const uint8_t* value, uint16_t size) {
void MarlinSettings::write_data(int &pos, const uint8_t* value, uint16_t size) {
if (eeprom_write_error) return;
while (size--) {
uint8_t * const p = (uint8_t * const)pos;
@ -243,8 +248,7 @@ void Config_Postprocess() {
value++;
};
}
bool eeprom_read_error;
void _EEPROM_readData(int &pos, uint8_t* value, uint16_t size) {
void MarlinSettings::read_data(int &pos, uint8_t* value, uint16_t size) {
do {
uint8_t c = eeprom_read_byte((unsigned char*)pos);
if (!eeprom_read_error) *value = c;
@ -257,14 +261,14 @@ void Config_Postprocess() {
#define DUMMY_PID_VALUE 3000.0f
#define EEPROM_START() int eeprom_index = EEPROM_OFFSET
#define EEPROM_SKIP(VAR) eeprom_index += sizeof(VAR)
#define EEPROM_WRITE(VAR) _EEPROM_writeData(eeprom_index, (uint8_t*)&VAR, sizeof(VAR))
#define EEPROM_READ(VAR) _EEPROM_readData(eeprom_index, (uint8_t*)&VAR, sizeof(VAR))
#define EEPROM_ASSERT(TST,ERR) if () do{ SERIAL_ERROR_START; SERIAL_ERRORLNPGM(ERR); eeprom_read_error |= true; }while(0)
#define EEPROM_WRITE(VAR) write_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR))
#define EEPROM_READ(VAR) read_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR))
#define EEPROM_ASSERT(TST,ERR) if (!(TST)) do{ SERIAL_ERROR_START; SERIAL_ERRORLNPGM(ERR); eeprom_read_error = true; }while(0)
/**
* M500 - Store Configuration
*/
bool Config_StoreSettings() {
bool MarlinSettings::save() {
float dummy = 0.0f;
char ver[4] = "000";
@ -576,7 +580,7 @@ void Config_Postprocess() {
/**
* M501 - Retrieve Configuration
*/
bool Config_RetrieveSettings() {
bool MarlinSettings::load() {
EEPROM_START();
eeprom_read_error = false; // If set EEPROM_READ won't write into RAM
@ -597,7 +601,7 @@ void Config_Postprocess() {
SERIAL_ECHOPGM("EEPROM version mismatch ");
SERIAL_ECHOPAIR("(EEPROM=", stored_ver);
SERIAL_ECHOLNPGM(" Marlin=" EEPROM_VERSION ")");
Config_ResetDefault();
reset();
}
else {
float dummy = 0;
@ -747,6 +751,11 @@ void Config_Postprocess() {
EEPROM_READ(lcd_preheat_bed_temp);
EEPROM_READ(lcd_preheat_fan_speed);
//EEPROM_ASSERT(
// WITHIN(lcd_preheat_fan_speed, 0, 255),
// "lcd_preheat_fan_speed out of range"
//);
#if ENABLED(PIDTEMP)
for (uint8_t e = 0; e < MAX_EXTRUDERS; e++) {
EEPROM_READ(dummy); // Kp
@ -869,9 +878,9 @@ void Config_Postprocess() {
if (eeprom_checksum == stored_checksum) {
if (eeprom_read_error)
Config_ResetDefault();
reset();
else {
Config_Postprocess();
postprocess();
SERIAL_ECHO_START;
SERIAL_ECHO(version);
SERIAL_ECHOPAIR(" stored settings retrieved (", eeprom_index - (EEPROM_OFFSET));
@ -881,7 +890,7 @@ void Config_Postprocess() {
else {
SERIAL_ERROR_START;
SERIAL_ERRORLNPGM("EEPROM checksum mismatch");
Config_ResetDefault();
reset();
}
#if ENABLED(AUTO_BED_LEVELING_UBL)
@ -923,7 +932,7 @@ void Config_Postprocess() {
#endif
}
#if ENABLED(EEPROM_CHITCHAT)
Config_PrintSettings();
report();
#endif
return !eeprom_read_error;
@ -931,7 +940,7 @@ void Config_Postprocess() {
#else // !EEPROM_SETTINGS
bool Config_StoreSettings() {
bool MarlinSettings::save() {
SERIAL_ERROR_START;
SERIAL_ERRORLNPGM("EEPROM disabled");
return false;
@ -942,7 +951,7 @@ void Config_Postprocess() {
/**
* M502 - Reset Configuration
*/
void Config_ResetDefault() {
void MarlinSettings::reset() {
const float tmp1[] = DEFAULT_AXIS_STEPS_PER_UNIT, tmp2[] = DEFAULT_MAX_FEEDRATE;
const uint32_t tmp3[] = DEFAULT_MAX_ACCELERATION;
LOOP_XYZE_N(i) {
@ -1118,7 +1127,7 @@ void Config_ResetDefault() {
#endif
#endif
Config_Postprocess();
postprocess();
SERIAL_ECHO_START;
SERIAL_ECHOLNPGM("Hardcoded Default Settings Loaded");
@ -1129,10 +1138,11 @@ void Config_ResetDefault() {
#define CONFIG_ECHO_START do{ if (!forReplay) SERIAL_ECHO_START; }while(0)
/**
* M503 - Print Configuration
* M503 - Report current settings in RAM
*
* Unless specifically disabled, M503 is available even without EEPROM
*/
void Config_PrintSettings(bool forReplay) {
// Always have this function, even with EEPROM_SETTINGS disabled, the current values will be shown
void MarlinSettings::report(bool forReplay) {
CONFIG_ECHO_START;

51
Marlin/configuration_store.h
Unescape Escape View File

@ -25,19 +25,38 @@
#include "MarlinConfig.h"
void Config_ResetDefault();
bool Config_StoreSettings();
#if DISABLED(DISABLE_M503)
void Config_PrintSettings(bool forReplay=false);
#else
FORCE_INLINE void Config_PrintSettings(bool forReplay=false) {}
#endif
#if ENABLED(EEPROM_SETTINGS)
bool Config_RetrieveSettings();
#else
FORCE_INLINE bool Config_RetrieveSettings() { Config_ResetDefault(); Config_PrintSettings(); return true; }
#endif
#endif //CONFIGURATION_STORE_H
class MarlinSettings {
public:
MarlinSettings() { }
static void reset();
static bool save();
#if ENABLED(EEPROM_SETTINGS)
static bool load();
#else
FORCE_INLINE
static bool load() { reset(); report(); return true; }
#endif
#if DISABLED(DISABLE_M503)
static void report(bool forReplay=false);
#else
FORCE_INLINE
static void report(bool forReplay=false) { }
#endif
private:
static void postprocess();
#if ENABLED(EEPROM_SETTINGS)
static uint16_t eeprom_checksum;
static bool eeprom_read_error, eeprom_write_error;
static void write_data(int &pos, const uint8_t* value, uint16_t size);
static void read_data(int &pos, uint8_t* value, uint16_t size);
#endif
};
extern MarlinSettings settings;
#endif // CONFIGURATION_STORE_H

6
Marlin/ultralcd.cpp
Unescape Escape View File

@ -2046,12 +2046,12 @@ void kill_screen(const char* lcd_msg) {
*/
#if ENABLED(EEPROM_SETTINGS)
static void lcd_store_settings() { lcd_completion_feedback(Config_StoreSettings()); }
static void lcd_load_settings() { lcd_completion_feedback(Config_RetrieveSettings()); }
static void lcd_store_settings() { lcd_completion_feedback(settings.save()); }
static void lcd_load_settings() { lcd_completion_feedback(settings.load()); }
#endif
static void lcd_factory_settings() {
Config_ResetDefault();
settings.reset();
lcd_completion_feedback();
}

Write Preview
Loading…
Cancel
Save