585c00a728
Proposed changes
...
This is what I did yesterday:
- basicly gave the tests more comprehensive names; put all the
declarations at the top; got rid of the magic negative C-value (renamed
to P + A, O, T)
- "cos(RADIANS(180 + 30 * axis)) * (1 + circles * 0.1 * ((zig_zag) ? 1 :
-1)) * delta_calibration_radius" compiles wrong is zig_zag statement is
without brackets
- DELTA_TOWER_ANGLE_TRIM reset to 3 values (the calcs use the 3th value
to normalize will not compile otherwise)
-Wrote 3 dummies to keep EEPROM lenght the same
-Reset the configs to the 'original' with autocal + menu disabled (but
can be enabled of course)
8 years ago
29fa241617
Initial patches to G33
8 years ago
12ce051b55
Add a function to output spaces to serial
8 years ago
42f4c53254
Starting on G33 rewrite
8 years ago
baf3b91460
DELTA_TOWER_ANGLE_TRIM only needs AB
8 years ago
27cd165adf
Last three Spanish language strings
...
Updates as per @thinkyhead request.
8 years ago
2cc9774f34
Apply bltouch_menu
...
As proffered in #6252
8 years ago
1a111180de
Clean up set_heaters_for_bltouch
8 years ago
7db805930a
Cleanup configurations
8 years ago
8bf3a3fcdb
Remove inaccurate comments from ubl.h
8 years ago
47557d5a19
Fix up formatting in ubl.h
8 years ago
0a8e09c723
Clean up excess whitespace, comment formatting
8 years ago
a35c681453
Clean up least_squares_fit
8 years ago
40089249c3
add PIN_EXISTS to HAS_xyz_MIN macro
8 years ago
8020069371
Apply coding standards for indentation
8 years ago
dabca83742
Merge pull request #6437 from Kaibob2/patch-1
...
Update language_de.h
8 years ago
3d0a4c4ea9
Update language_de.h
8 years ago
6bf1d50188
Added missing translations ( #6458 )
8 years ago
404f767d44
Update language_tr.h ( #6463 )
8 years ago
5e701524f8
Update language_cz.h for new translations ( #6465 )
...
* Update language_cz.h for new translations
* Correction translate
* Revert correction back to hotend
8 years ago
0a92ce7a98
Completed french translation ( #6475 )
8 years ago
ff4fb42e7d
Add new strings as per recent changes in RCBugFix ( #6482 )
...
Adding missing strings to Spanish language, as per changes recently
done to the RCBugFix branch.
8 years ago
67d1fc5556
Update language_nl.h ( #6478 )
...
updated the RCbugfix release with additional Dutch translations
8 years ago
8c6b4537a6
Fix issue in itostr4sign with numbers <100 ( #6487 )
...
The first character in the string wasn't blanked if the number went from >= 100 to <100, resulting in artefacts in the displayed string.
8 years ago
4ea8d0f89b
Solved "The Travis CI build failed "
8 years ago
ed6b361e27
cleanup ready to squash
8 years ago
7a6a1ef583
M666 normalize positive values to <=0
...
M666
+ tower radians absolute value
8 years ago
4075b95519
Allow BL-Touch users to control heaters during probe event ( #6485 )
...
The Configuration.h file entries for BL-Touch have been updated to:
```cpp
//#define BLTOUCH
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are
turned off during probe event
```
8 years ago
6e8ecb908a
Shut down heaters during BL-Touch probe event
...
The electro-magnetic interference from the bed and nozzle are affecting
the BL-Touch repeatability for some users. This problem can be helped
by shutting down the heaters during the actual probe event and then
quickly turning them back on.
Because this code is messing with the heaters, it is written in a
paranoid manner. It only turns the heaters back on if everything is
EXACTLY as it expects things to be. The BL-Touch probe must have been
put into a deployed state less than 20 seconds prior, or the stow()
function will NOT turn the heaters on.
This code has been tested and works for both G28 and probing functions.
8 years ago
d8102aeca8
Cn negative : no tower angle calibration
...
Giving a negative number of probe points disables the tower angle
correction calibration ('4point' instead of '7point' solution)
EEPROM version updated
8 years ago
3601f08e87
Better tuned FolgerTech i3-2020 example file
8 years ago
a20b7d9581
Better tuned Example file for FolgerTech i3-2020
...
Also setting up Z-Probe on the machine.
8 years ago
bf2fe46062
Update language_de.h
8 years ago
11d34be060
Update language_de.h
8 years ago
817ecb9ff4
Merge pull request #6453 from thinkyhead/rc_cleanup_wednesday
...
Minor cleanups, work-in-progress
8 years ago
22f6e277af
Get example files fully into compliance
...
Change to support new name GRID_MAX_POINTS_XY
Start UBL at version 1.0 in the CUSTOM_MACHINE_NAME
8 years ago
a9bc1d30cc
z_offset change
...
Avoids to have to recalibrate the delta_height after a z_offset change
8 years ago
ec26e23e7e
Add my two 'Nice' machines as example configurations
...
These are my two 'Nice' machines. Both are good example machines. The
FolgerTech i3-2020 is probably the best value kit on the market right
now. And it has developed a 'Cult Following' of hobbiests. I'll always
have an up to date Configuration.h file set for it, so it may as well be
an example configuration.
And the gCreate gMax 1.5+ is the best printer I've ever seen that runs
Marlin. For sure, I'll always have up to the minute Configuration.h
files for this printer also. I've moved over to using the gMax as my
primary development machine for Marlin. So... Besides being a good
machine, it is a nice convienience for me to have this Configuration.h
file as an 'Example'.
8 years ago
adb8e68592
Fix stuck "Print Aborted" LCD message
...
Fixes #6393
8 years ago
096b927102
Minor optimization of FILAMENT_WIDTH_SENSOR
8 years ago
5bdb0b567d
Cosmetic patches
8 years ago
38ae7f4238
Added more translation strings
...
There are some quite tricky ones which are hardly translateable.
Maybe @Sebastianv650 can review this
8 years ago
4d96d3eab1
Bootscreen delay after clear, then set chars
...
Fixes #6426
8 years ago
5512130d6c
Only set Compare Mode for channel A
...
Fixes #6445
8 years ago
d467e97679
Smart-Fill and Mesh-Tilting (both 3-point and grid) working!
...
Also... The memory corruption issue may be fixed. The GCC compiler
was inlining static functions and this caused the G29() stack frame to
become much larger than the AVR could handle.
8 years ago
a699967ec8
Merge pull request #6443 from thinkyhead/rc_interrupt_fastio
...
Patch fastio.h with Timer 2 interrupt support
8 years ago
2823bf0874
Update fastio.h with special handling for Timer 2
8 years ago
fd535e111a
Fix up XYZ_CONSTS_FROM_CONFIG macro
8 years ago
03c2f756b9
Update language_de.h
8 years ago
dcf30a69d6
Allowing #define DELTA_TOWER_ANGLE_TRIM[C_AXIS]
...
More consistent with M665 where C-value is allowed as well, then
normalized
8 years ago
f41fb2b635
Numerous UBL-related changes:
...
* relocated ubl state to config. store:
* removed a number of ubl state variables and padding which were largely unused - saved 58 bytes of both SRAM and EEPROM;
* modified ubl sanity_check - no longer checks removed state variables that were otherwise unused, where checking didn't seem to accomplish anything, ultimately;
* removed pre_initialized state, saving 64 bytes of SRAM;
* removed automatic saving of UBL state after UBL activation/deactivation;
* consolidated multiple GRID_MAX_POINTS_X/Y to 'Global Leveling' section of EEPROM;
* minor update to G29 Sx notes/instructions;
* renamed mesh load and save parameter to 'slot' from 'm' for clarity;
8 years ago
f1a4758cef
use progmem instead of sram for mesh_index_to_x/ypos array;
...
fix maximum mesh_index_ array size at 16 (15+1);
8 years ago
87d240042a
Optimize number-to-string functions, no-fan display
8 years ago
959566cf0a
Update note about M163 / M164
8 years ago
830851df13
Spend some SRAM to optimize bilinear leveling
8 years ago
091179d960
bed_level_grid => z_values (also *_virt array)
8 years ago
23cdbbb2d3
Add a method to refresh bilinear bed level after a change
8 years ago
ccda63c473
Drop the accessor form for LCD value editing
8 years ago
10da175be5
Fix a pair of compiler complaints
8 years ago
ff0018e287
Format hex values as uppercase
8 years ago
77aa16005d
Polish font
...
Add polish font for GLCD displays only.
HD44780 work properly without polish character.
Update language_pl.h.
8 years ago
244f67590e
Delta probe height bug solved
8 years ago
406a83ff2d
Fix for Meshpositions if printer has negative endstop positions
8 years ago
3ed737425d
Fix typo in new SET_COM macro
8 years ago
88649b06a6
use planner.z_fade_height, etc. instead of private, ubl-specific g29 fade height
8 years ago
004928148c
Tower angles
...
Adding '7-point' tower angle correction calibration
8 years ago
76ec7a0f80
Adding upto 7*7 probe grids
...
- adding Cn 5, 6 and 7
8 years ago
d4f593d200
Delete 'expert level'
...
and getting rid off verbose level 3 and configuration_adv settings
8 years ago
13c8493878
M665 rework and related issues (all delta's)
...
- Making M665 compatible with repetier (see
http://reprap.org/wiki/G_code#M665:_Set_delta_configuration )
- M665 B also sets the radius for manual calibration menu
- Converting tower ajustment definitions to arrays - tower angle
corrections compatible with Esher 3D wizzard
- Only tower angles need to be adjustable with M665 and stored to EEPROM
- tower radius and diag rod can be adjusted in the FW only with #define
8 years ago
e0e069c6d8
Clean up trailing whitespace
8 years ago
9b94210394
Bring FLSUN config more up to date
8 years ago
b0aa256bc0
Updates for all configs
8 years ago
ee46ce1743
Add and apply interrupt helper macros
8 years ago
6131c62499
General cleanup
8 years ago
2c86dfd3b5
Fix compiler type conversion errors after LCD changes
8 years ago
55f9e76610
Merge pull request #6367 from thinkyhead/rc_cleanup_followup
...
Cleanup after some direct commits
8 years ago
d38a792a91
Merge pull request #6382 from MagoKimbra/fix_configuration_store
...
Fix double definition in configuration_store
8 years ago
b98bc034ae
Replace c_assert hack with static_assert
8 years ago
5eb2b1a790
Clear up G29 compiler warnings
8 years ago
4ce2a63db0
Apply const, spacing to Marlin_main.cpp
8 years ago
e97f1284c1
Cleanup of pins testing code
8 years ago
e9b53ae00c
Cleanup after some direct commits
...
https://github.com/MarlinFirmware/Marlin/commit/5e9726530ff21d3bc62beaa6
ac1b9437c276130a
8 years ago
e05d050a1e
Add hex routine to print an address
8 years ago
4542282f5e
Fix broken TOGGLE macro in fastio.h
8 years ago
ed52275a14
Fix double definition in configuration_store
8 years ago
de569e3d4e
Merge pull request #6327 from Bob-the-Kuhn/M43-toggle-&-Z-probe-fixes
...
M43 Toggle & Z servo test - fix bug & add another check
8 years ago
f33a650ecc
Merge pull request #6368 from thinkyhead/rc_linear_advance_eeprom
...
Add Linear Advance values to EEPROM and LCD
8 years ago
a00ae4790a
Replace M905 with unique code M900
8 years ago
1286d9603d
Clean up and organize ultralcd.cpp
8 years ago
3cdf78a79f
MSG_VOLUMETRIC => MSG_FILAMENT
8 years ago
f8e77d6545
Add Linear Advance values to EEPROM and enable configuration of K via LCD
8 years ago
eb2d073dae
Add M905 R for setting the E/D ratio directly
8 years ago
69dfa54a84
Use code_value_linear_units for known-linear axes
8 years ago
b956f2642b
Show M503 report with current linear units
8 years ago
ba4a005ceb
Merge pull request #6373 from mtowara/mt_makefile_fix
...
Fix Makefile build
8 years ago
150b15c311
fix compiler errors generated by more stringent flags in Makefile:
...
- use volatile for registers
- avoid implicit casts
8 years ago
f6095c9325
fix missing serial.cpp in Makefile
8 years ago
871f92378c
Tweak headings in EEPROM structure
8 years ago
bf2548be4a
Merge pull request #6362 from tcm0116/babystepping
...
Only queue babysteps if axis is in a known position
8 years ago
9c410ddf68
Fixed an issue where a display with a hardware reset pin (LCD_RESET) may not get initialized properly.
8 years ago
72a7fac461
Only queue babysteps if axis is in a known position
8 years ago
5e9726530f
Setup to find data corruption and general clean up
...
This data corruption problem is very difficult. Just changing the code
a little bit changes whether the problem even happens and what is
affected. I need these changes in the main branch so I can operate with
the extra debug code always available and turned on.
Everything is setup such that if M100 is turned off or DEBUG(ECHO) is
turned off, the code is not affected. M100 has been made a little bit
more inteligent so it can display the serial command buffers in a more
meaningful way (because the data corruption seems to often times end up
in that area).
8 years ago
e519e95953
Merge pull request #6358 from thinkyhead/rc_doubleclick_fix
...
Show Cancel/Continue screen for ABL "Level Bed"
8 years ago
a81606c680
Show Cancel/Continue screen for ABL "Level Bed"
8 years ago
51021bc7b8
Merge pull request #6353 from thinkyhead/rc_endstop_coolness
...
Clean up endstop triggering code
8 years ago
857dec0990
Merge pull request #6342 from benlye/benlye-fix-softspi
...
Fix softspi variant conditional for 1284p
8 years ago
4e04383d18
Merge pull request #6354 from thinkyhead/rc_doubleclick_fix
...
Fix undefined symbol if DOUBLECLICK_FOR_Z_BABYSTEPPING and HAS_BED_PROBE defined
8 years ago
8dd0492e68
Show lcd_babystep_zoffset screen if DOUBLECLICK_FOR_Z_BABYSTEPPING is enabled and HAS_BED_PROBE is defined
8 years ago
0a2f60fab4
Make spi.h inclusion conditional
...
spi.h is only needed if HEATER_0_USES_MAX6675 is defined, so making its inclusion conditional on HEATER_0_USES_MAX6675 being defined.
8 years ago
60471b7592
minor improvements
...
Configuration_store.cpp - changed a couple of print statements so the
values were printed. The old method resulted in the formula being
printed.
ubl_G29
1) added support for R option to P4. Now probes all points unless R is
present and the number is greater than 0.
2) P2 - moved map print statement so it showed the point that was
currently being probed, The old location did this only for the first
point.
3) P4 - Moved the map print for the same reason.
ultralcd.cpp - changed "Mesh Editor :" to "Mesh Editor" because the LCD
draw routine puts a ":" in automatically so you end up with an extra ":"
using the old message.
8 years ago
25a61e9061
Improve motion-based endstop triggering code
8 years ago
a2356c2825
Fix compiler warning about z-offset callback
8 years ago
037c964d26
Reverse bools on prepare_move sub-functions
8 years ago
d9c4333806
Extra logging of Dual X modes
8 years ago
4067d15c92
Cleanup, extend TMC2130 implementation
8 years ago
d60c02c5b1
Cleanup, extend TMC2130 configuration
8 years ago
0e97b3d6d0
Fix some configuration spacing
8 years ago
cf6f483378
Merge pull request #6187 from thinkyhead/rc_flsun_delta_autocal
...
Delta: DELTA_HEIGHT, G33 Auto-Calibrate, drop M206/M428, add M665 H
8 years ago
24882adfbf
Allow NO_WORKSPACE_OFFSETS with DELTA_AUTO_CALIBRATION
...
- On `DELTA` the `M665 H` option supplants `M206`
- On `DELTA` `NO_WORKSPACE_OFFSETS` only reverts `G92` behavior
- Spawn 4 conditionals based on `NO_WORKSPACE_OFFSETS`
- Optimize coordinate space conversion for `DELTA` workspace
- To keep EEPROM version, retain `home_offset[XYZ]`, just ignore XY
8 years ago
1acb84ba02
fix 1 bug, add error messages
...
===============================================
make changes requested by reviewers
===============================================
add M43 test to Travis, fix EOL, remove trailing spaces
8 years ago
8821963873
Implement delta auto-calibration and delta_height
8 years ago
b305699046
Merge pull request #6341 from benlye/benlye-lcd_babystep_zoffset
...
Fix lcd_babystep_zoffset()
8 years ago
03bda24d19
Add delta auto-calibration and configuration for Flsun AC
8 years ago
1bd25fd2b3
Clean up config spacing, section headings, etc.
8 years ago
153b0ae967
Tweak Delta Printer configuration note
8 years ago
81ffd98dd9
Allow faux leveling
8 years ago
2355d87e11
Merge pull request #6346 from thinkyhead/rc_broken_abl_test
...
Add support for SOLENOID_PROBE
8 years ago
f4685c28b7
Reorder Conditionals_post.h and add comments
8 years ago
0ac2b5c045
Additional 5 extruders support (solenoids, microstepping)
8 years ago
fd2a0784ba
Add support for SOLENOID_PROBE
8 years ago
5803ba43a9
Expose EXT_SOLENOID as an advanced option
8 years ago
ea734f910b
Use direct pin manipulation whenever possible
8 years ago
19d0c6a0c0
Patch to init W with RGBW_LED
8 years ago
3e079660b0
Never define SLED_PIN
8 years ago
1a447d0047
Fix variant conditional for 1284p
8 years ago
1f9ee42750
Fix lcd_babystep_zoffset()
...
Resolve 'steps_to_mm was not declared in this scope' compilation error after recent changes to merge babystepping with M851
8 years ago
445d39e95a
CORExx endstop detection fixes
...
1. The CORExx printers were checking more endstop axis than needed.
2. Removed all the CORE_xx_NOT logic. The motor_direction(xx) routine
always returns the correct data so it is not needed. It was actually
cause the wrong direction to be checked in some cases.
3. Made the logic/defines for X, Y & Z axis all the same. The old logic
checked inappropriate configurations for Y and didn't check all the
correct configurations on Z.
4. Added a check for zero steps before the X, Y & Z axis. Previously
would check the they axis even if there were no movement.
8 years ago
28fec61f92
M100 Fixes and Features
...
All the memory accesses need to be unsigned char in order to avoid
false errors being detected. Two new features are available for
developers to call into the M100 functionality to look for data
corruption.
8 years ago
52c3ace102
Add BABYSTEP_ZPROBE_OFFSET as an optional feature
8 years ago
cd4e6abec8
Group BABYSTEPPING options together
8 years ago
60ac41a32c
Add code to handle changes to zprobe_zoffset
8 years ago
8fa4209916
Movement/adjustment should be reverse of probe offset change
8 years ago
361655828f
Use babystepping to adjust bed probe z-offset
8 years ago
36e5c7c389
Merge pull request #6330 from thinkyhead/rc_improvements
...
Sanity check per-axis options' array sizes
8 years ago
02fca543bb
Merge pull request #6272 from thinkyhead/rc_adc_variable_rate
...
Make ADC sensor reading frequency adjustable
8 years ago
34308368c0
Sanity check per-axis settings for size
8 years ago
ac96ae89f9
Apply `const` in Stepper::isr
8 years ago
2fa1e882d0
Merge pull request #6325 from thinkyhead/rc_M20_with_size
...
Simplified M20 with size
8 years ago
1b12fea0fa
simplified M20 with size
8 years ago
4022b971db
Merge pull request #6315 from thinkyhead/rc_unify_M421
...
Unify M421
8 years ago
b236562354
Merge pull request #6306 from thinkyhead/cleanup_after_6302
...
Adjustments to M100
8 years ago
5e4f4d387f
Swap MBL z_values dimensions to [X][Y]
8 years ago
063f641651
Unify M421
8 years ago
6d5400dc31
Merge pull request #6240 from thinkyhead/rebuild_rgb_led
...
Extend RGB LED with Printer Events
8 years ago
dac21ec680
Add support for an RGBW LED
8 years ago
e7746ffee4
Extend RGB LED support, adding Printer Events
8 years ago
c7063eb55c
theTarget => target_temp
8 years ago
36bda2bade
Add HAS_RESUME_CONTINUE shorthand macro
8 years ago
53e6c33c37
2 is DXC_DUPLICATION_MODE
8 years ago
a2cb0a3d54
Use multiply for delta probe constraint
8 years ago
6487c96a4a
Merge pull request #6313 from Kaibob2/patch-10
...
Allow 10mm Movements for Z-Axis
8 years ago
001bc14255
Allow 10mm Movements for Z-Axis
...
I use the movement options via LCD quite often. Especially to get the nozzle out of the way. I see no reason, why the 10mm option is disabled for the Z-Axis, this is why i always delete this line when i compile a new version.
If this is unwanted, please just close this PR
8 years ago
6a9b008044
Fix MINIMUM_STEPPER_PULSE maths
8 years ago
68773f4486
Simplify stepper macros by renaming enable/disable macros
8 years ago
e02a5a6371
Add macros for delays by machine cycle
8 years ago
ecc537015a
Have M109 / M190 do nothing with no parameters
8 years ago
03aa9a390e
Apply coding standards to M100, break up into functions
8 years ago
48c16fc6ef
Merge pull request #6307 from thinkyhead/rc_less_no_reentrance
...
Only lcd_synchronize needs no_reentry
8 years ago
4fcfe926d6
Only lcd_synchronize needs no_reentry
8 years ago
67fb7f82ac
Merge pull request #6283 from thinkyhead/rc_eeprom_z_fade
...
Save / restore z_fade_height in EEPROM
8 years ago
eff5af569b
Merge pull request #6300 from MagoKimbra/rc_fix_mesh_report
...
Fix mbl_mesh_report
8 years ago
4a18968c10
Merge pull request #6297 from Kaibob2/patch-9
...
Fix EPROM -> EEPROM
8 years ago
ba85faabc0
Fix M100 Free Memory Checker
...
M100 had numerious changes and quit working. Part of the problem is
the overloading of the SERIAL_PROTOCOL functions. Also, some of the
address arithmatic was changed to use char *ptr and passing ptr into the
SERIAL_PROTOCOL functions caused them to try to print a string instead
of a number. M100 is working again. Let's keep it that way!
M100 has been expanded to now have a function int
free_memory_is_corrupted() that can be called from other code to see if
the free space is still contiguous. It may make sense to add a flag to
control its verbose nature but right now, the extra chit chat is very
helpful to know int free_memory_is_corrupted() is doing the right thing
and what it found at various points when it was called. A 'Show &
Tell' is coming up with int free_memory_is_corrupted().
8 years ago
3b82db5fe9
Missing semicolon in ultralcd.cpp
...
When PARK_HEAD_ON_PAUSE is defined Marlin won't compile because of two missing semicolon.
8 years ago
7d2e637867
Fix mbl_mesh_report
8 years ago
afeb0452ef
Fix EPROM -> EEPROM
...
These fixes are neede because before it showed the englisch text even if language = de was selected
8 years ago
7f950a80c0
Make ADC sensor reading frequency adjustable
8 years ago
786af73e24
Convert config code to a static class
8 years ago
5b9476fe78
Added z_fade_height to EEPROM-Settings
...
Firmware was forgetting the z_fade_height in Planner, set by M420 Z<f>,
after each reset or loading settings from EEPROM. Added the float
z_fade_height to EEPROM-Storage, now remembers the value.
8 years ago
9343f6a95f
Put TOSHIBA with other stepper driver options
8 years ago
7a704af5e6
Merge pull request #6284 from thinkyhead/rc_wt150_rebase
...
wt150 (Mightyboard Rev E) & RRD Full Graphic Smart Controller
8 years ago
2031fb913b
Fixed comparison of float values to NaN
8 years ago
e48a52a530
Patch a display issue with LCD_DECIMAL_SMALL_XY
...
The `ftostr4sign` function got munged by the `WITHIN` patch
8 years ago
1a3cd6a090
Merge pull request #6213 from thinkyhead/rc_gitattributes
...
Init bed_level_virt_interpolate on EEPROM load
8 years ago
314a02e2d5
Toggle with XOR
8 years ago
8bc0d90b00
Init bed_level_virt_interpolate on EEPROM load
8 years ago
20dd5376b8
Cheaptronic V2
...
Add support for new electronics
www.reprapobchod.cz
8 years ago
4cdda5615b
Bring other configs up to date with wt150 changes
8 years ago
9b0885f4f6
Allow boards without a thermistor
8 years ago
64cfcebe66
Update SlowSoftI2CMaster link. MightyBoard digipots I2C bus has no resistors.
8 years ago
0eb16d9ff7
Add example config for the wt150 printer with RepRapDiscount Full Graphic Smart Controller
8 years ago
652bedfa18
Add RepRapDiscount Full Graphic Smart Controller support to MIGHTYBOARD REVE
8 years ago
44cdebb8f1
Add software spi support for max6675
8 years ago
191fec009f
Add digipot i2c control for MCP4018
8 years ago
e5b16081cb
Update TinyBoy2 configurations
8 years ago
1855534f20
Config files cleanup
8 years ago
c26a315d0b
Additional missed patches
8 years ago
39617e10b8
Patch configs comment formatting
8 years ago
c54f6cf23d
Updates to support 5 extruders
8 years ago
2b88ccd0aa
Apply UBL mesh bounds to remaining configs
8 years ago
60be3d264b
Macros to print floats, hiding imprecision
8 years ago
b356d73239
Merge pull request #6278 from thinkyhead/pr_delta_angles
...
Followup to additional delta trim options
8 years ago
f78d44e91a
Added support for delta tower angle corrections.
8 years ago
d3b4d84586
Merge pull request #6277 from thinkyhead/pr_roxy3d_rcbugfix
...
Unify UBL Command Parsing
8 years ago
d4ce839351
Cleanup following Pins Debug update
8 years ago
c7a8f7970b
Formatting / cleanup
8 years ago
29d4ec8257
Support 5 extruder auto fans
8 years ago
824f3c1c0d
Fix up configuration comments
8 years ago
995ed90248
Clean up Filament Width Sensor comments
8 years ago
5a7b810fdd
General comment cleanup
8 years ago
0027c22839
Drop extraneous calls to lcd_update
8 years ago
d6db7a9b03
patch "step_remaining"
8 years ago
cbc2331187
Use LCD_MESSAGEPGM over lcd_setstatuspgm
8 years ago
3729510b1e
Set and check main parameter values, report all errors
8 years ago
34d3ed9ab1
These items were removed from the UBL Command Parsing
...
Having these items randomly (and errorniously) disappear cost me several
hours of work yesterday.
8 years ago
15edb41cee
Patches to UBL
8 years ago
14cf527bb8
Getting setup for debugging
8 years ago
f8408036f2
Merge pull request #6264 from thinkyhead/rc_five_extruders
...
Support up to 5 extruders in Marlin
8 years ago
f7fc49c3a3
Finish name change
...
DAC_STEPPER_DFLT wasn't changed to DAC_MOTOR_CURRENT_DEFAULT in all
places on PR #6124
8 years ago
832064e4f2
Implementation changes to support 5 extruders
8 years ago
04050237f0
Header and pins changes to support 5 extruders
8 years ago
2a84122edd
Configuration changes to support 5 extruders
8 years ago
edf18977c1
Patch pins files hotends/e-steppers sanity check
8 years ago
dc84678fc1
Fix HOTEND_STATUS_ITEM for graphical display
8 years ago
a0de5d94e2
Merge pull request #6258 from benlye/benlye-bilinearfix2
...
Better fix for bilinear Z offset and G29 Z (update to #6251 )
8 years ago
b23aef5b8d
Merge pull request #6190 from Bob-the-Kuhn/Stop-and-Kill-prints---round-2
...
Message for every KILL and STOP (also need delays)
8 years ago
945303c0d5
eleminate bootscreen.h
8 years ago
ef3da3971e
Update ubl.h
8 years ago
8644dc170b
get synchronized to current file names
8 years ago
1451b7eacf
UBL's Grid Based Leveling code
...
Pretty much... The code is in place. Still more work to do. But it
has a lot of hooks and variables in other code, so commit and merge
before I pick up a million 'Conflicts'.
8 years ago
549055f20c
Merge pull request #6124 from Bob-the-Kuhn/MCP4728-consistency
...
MCP4728 consistency & fix ultralcd.cpp (PRINTRBOARD Rev F and RIGIDBOARD V2)
8 years ago
a77875c9d2
Merge pull request #6114 from Bob-the-Kuhn/try2-add-BLTouch-retry
...
Another BLTouch retry place (replaces PR #6108 )
8 years ago
3b9ff2cb12
Merge pull request #5676 from Bob-the-Kuhn/configuration.h
...
Configuration.h - reword Z PROBE section
8 years ago
6643d553f6
# This is a combination of 2 commits.
...
# This is the 1st commit message:
MCP4728 consistency & fix ultralcd.cpp
The MCP4728 DAC controls the stepper motor current strenth on the
PRINTRBOARD Rev F and RIGIDBOARD V2 boards.
PR #5792 on 9 FEB 2017 implemented default drive percentages but only on
the RIGIDBOARD V2.
This change moves the default settings to Configuration_adv.h.
Also, ultralcd.cpp won't compile because of a type def conflict.
Changed it to match the one in stepper_dac.cpp
===========================================================
reword stepper curent section for clarity
===========================================================
change name & improve comments
===========================================================
changed name from A4JP to SCOOVO_X9H per PR #6139
# This is the commit message #2 :
fix typo
8 years ago
a44b3432c1
add BLTouch retry to a second place & add/update delays
...
=================================================
implement requested changes
=================================================
remove delays (they're in another PR) & move return
8 years ago
a5abc61fb9
Merge pull request #6219 from Bob-the-Kuhn/Servo-probe-and-toggle-pins
...
M43 - add Toggle utility and Z servo utility (replaces PR #5864 )
8 years ago
3b8926bd09
improved wording, consolidation of info, BLTouch warning
...
==============================================
clarified BLTouch calculation & changed comment delimitters/flags
I found it hard to pickout the various sections in this area so I
changed most comments from // style to /** ... */
Made the BLTouch calculation simpler and clarified the units of measure
for the result.
============================================
add changes to example configurations
============================================
add TinyBoy2 to this PR & add BLTouch Delay
8 years ago
55d296aaf0
pinsDebug with more features, uses less RAM
...
I've just uploaded a major change to pinsDebug.
The big change was creating an array in FLASH that contained every
active pin definition. That reduced the RAM memory usage considerably
but increased the FLASH usage.
Creating the array requires going through the pin list twice. Rather
than having two copies of it in the code I moved the list out to another
file (pinsDebug_list.h) and then just did two #includes.
From the user’s view they’ll see the following changes:
1. Now reports all the names assigned to a pin
2. The port is now reported in addition to the pin number.
3. When PWM0A & PWM1C share a pin, both PWMs are reported
4. More PWM/Timer info is reported
One new item that may cause some concern is the usage of the LINE
predefined preprocessor macro. It may not be available if the Arduino
IDE goes to a different compiler.
Includes support for 1284 & 1286 families.
Memory usage changes when enabling PINS_DEBUGGING:
ATmega2560
FLASH
. without 52576
. with new 64592
. with old 62826
. new-out 12016
. old-out 10250
. new-old 1766
.
RAM
. without 2807
. with new 2875
. with old 3545
. new-out 68
. old-out 738
. new-old -670
==================================================================
minor changes - mostly formatting
1) added newline to end of teensyduino file
2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings
about redefining TEENSYDUINO
3) removed some trailing spaces
reduce PROGMEM size & update pin list
Reduced PROGMEM usage by
1) converting often used macro to a function
2) moved as much as possible into the function
This required creating two arrays of address pointers for the PWM
registers.
==================================================================
update with new M3, M4, M5 pin names
==================================================================
report I/O status for unused/unknown pins
8 years ago
e116723b8b
Adjust indentation in ubl.h
8 years ago
1b3a26f2f5
Rename all UBL files with a ubl_ prefix
8 years ago
d13991ae18
Use same config name for all mesh dimensions
8 years ago
f9686a108c
add Z servo test and toggle pins to M43
8 years ago
62cbaa302e
Z_DUAL_ENDSTOP - make offset a configuration item
...
The offset for Z_DUAL_ENDSTOP (z_endstop_adj) is already in Marlin.
This PR just makes it a configuration item.
z_endstop_adj is initialized in two places so both had to be modified.
8 years ago
c9e35004e7
pinsDebug with more features, uses less RAM
...
I've just uploaded a major change to pinsDebug.
The big change was creating an array in FLASH that contained every
active pin definition. That reduced the RAM memory usage considerably
but increased the FLASH usage.
Creating the array requires going through the pin list twice. Rather
than having two copies of it in the code I moved the list out to another
file (pinsDebug_list.h) and then just did two #includes.
From the user’s view they’ll see the following changes:
1. Now reports all the names assigned to a pin
2. The port is now reported in addition to the pin number.
3. When PWM0A & PWM1C share a pin, both PWMs are reported
4. More PWM/Timer info is reported
One new item that may cause some concern is the usage of the LINE
predefined preprocessor macro. It may not be available if the Arduino
IDE goes to a different compiler.
Includes support for 1284 & 1286 families.
Memory usage changes when enabling PINS_DEBUGGING:
ATmega2560
FLASH
. without 52576
. with new 64592
. with old 62826
. new-out 12016
. old-out 10250
. new-old 1766
.
RAM
. without 2807
. with new 2875
. with old 3545
. new-out 68
. old-out 738
. new-old -670
==================================================================
minor changes - mostly formatting
1) added newline to end of teensyduino file
2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings
about redefining TEENSYDUINO
3) removed some trailing spaces
reduce PROGMEM size & update pin list
Reduced PROGMEM usage by
1) converting often used macro to a function
2) moved as much as possible into the function
This required creating two arrays of address pointers for the PWM
registers.
==================================================================
update with new M3, M4, M5 pin names
==================================================================
report I/O status for unused/unknown pins
8 years ago
4abd53f65a
Adjust indentation in ubl.h
8 years ago
f5c5c1f771
Rename all UBL files with a ubl_ prefix
8 years ago
f1d50ac1dc
Fixing bilinear Z offset and G29 Z
...
The fix in #6251 for bilinear Z offset was flawed and broke the Z parameter of G29 for bilinear levelling. This is reverted and a different fix is used for the double-addition of the Z-probe offset to the bilinear correction grid.
8 years ago
eb1e6aa29b
Use same config name for all mesh dimensions
8 years ago
c961dd084d
Add hidden option to output Bilinear grids in JSON
8 years ago
df7b4252fd
Reduce M420 code for UBL slightly
8 years ago
8866158d03
Add LEVELING_DATA as a capability
8 years ago
0a2b4f3486
Fix bilinear levelling z offset
...
Since run_probe was altered to return the probe Z position rather than the nozzle Z position bilinear levelling has been broken because the Z-offset has been applied twice - once in the run_probe function, and then again in the G29 code for bilinear levelling.
8 years ago
44a849bdce
Fix broken M206/M428/G92 offsets
8 years ago
52978e5ba5
Fix spelling mistake when UBL's mesh is Inactive
8 years ago
0423e93c42
Fix M421 AUTO_BED_LEVELING_BILINEAR and AUTO_BED_LEVELING_UBL
...
M421 was not connected up for AUTO_BED_LEVELING_BILINEAR.
M421 needed to migrate mesh data to new UBL EEPROM layout.
8 years ago
3412950abc
Merge pull request #6209 from thinkyhead/rc_psu_zero
...
Power Supply 0 as "General"
8 years ago
3e9e94801f
Fix problem described in issue # 6175
...
As it turns out... an unsigned int can not go to less than 0, so the
loop never terminates.
8 years ago
289e3d6844
Merge pull request #6215 from thinkyhead/rc_bed_false_alarm
...
Fix thermal runaway when nonexistent bed temp is set
8 years ago
948728e63b
Fix line-endings in UBL_G29
8 years ago
699310d1d2
Fix: Thermal runaway if nonexistent bed's temp is set
8 years ago
c56eec29f0
Configurable delay for BLTouch servo emulation
8 years ago
deaad78df9
Merge pull request #5678 from Bob-the-Kuhn/G38-optional-double-tap
...
G38 bug fix, made double touch optional & reverted to Z_MIN_PROBE
8 years ago
5bce731962
Fix LCD preheat menus
8 years ago
4c72167af3
Prevent a warning on echo_command
8 years ago
9b5fd9522e
Fix formatting, order for a UBL change
8 years ago
54173c80ad
Power Supply 0 as "General"
8 years ago
a2775d0c70
can wstring be removed?
8 years ago
de4e19f17e
Patch MarlinSerial to match up with 32-bit version
8 years ago
2cbc7b4b73
Relocate serial macros and functions
8 years ago
eaa66f3c46
Indent MarlinSerial code
8 years ago
7a7a80e6c5
status_printf => lcd_status_printf_P
8 years ago
0e6ec34228
Use PSTR versions of lcd_status... to save SRAM
8 years ago
34e2420b9b
Apply const args, clean up find_closest_circle_to_print
8 years ago
e19fbd27ce
Minor spelling patch
8 years ago
790a3e9a8c
Remove extraneous check of UBL_G26_MESH_EDITING
8 years ago
7310110ec0
Fix logic of UBL::fade_scaling_factor_for_z
8 years ago
1a775cecac
Revert behavior of enqueue_and_echo_commands_P
8 years ago
79d42d87c1
Syntax cleanup
8 years ago
b47fd31c37
Revert some changes to UBL
8 years ago
185337e787
add delays to allow stop & kill messages to get out
8 years ago
63abb65146
Update description of PINS_DEBUGGING
8 years ago
73e193da1d
Implement LCD_BED_LEVELING for PROBE_MANUALLY
8 years ago
fcadc7bb1a
Implement the "manual" option for ABL
8 years ago
9e22184936
Add a "manual" option for ABL
8 years ago
541165e878
Merge pull request #6181 from thinkyhead/rc_ubl_further_fixes
...
Further adjustments to UBL code
8 years ago
b19a15fa7f
Within applied to UBL
8 years ago
342ee458ae
Additional UBL fixes, optimizations
8 years ago
a5e085cbea
Have run_probe() return probe Z, not nozzle Z
8 years ago
4487d22d56
Apply FIXFLOAT macro
8 years ago
6cac0f43eb
MBL fiddle
8 years ago
25a6bfa7ed
Add and apply WITHIN macro
8 years ago
81136c1e82
Merge pull request #6177 from thinkyhead/rc_tinyboy
...
Support for TinyBoy 2 3D printer (and its OLED display)
8 years ago
93aad54dc1
Clean up code, remove _now command function
8 years ago
6ba6c92a81
Add example configuration for TinyBoy L10/L16
...
The TB2 is a Indiegogo funded 3d printer. It uses a MKS SMELZI V1.0
main board (based on MELZI, i.e. Sanguinololu). I comes as a complete kit,
including display and panel.
Two variants exists, L10 and L16, with a height of 100 and 160 mm.
The heating function of the provided bed can enabled by soldering a
thermistor and some wires to it.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
8 years ago
0fe57ad4f5
Add Support TinyBoy2 OLED/Encoder panel
...
The OLED is driven by an SSD1306, connected to the board via
I2C, the rotary encoder is connected to 3 GPIO pins.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
8 years ago
65ca6472ba
Make G26 compatible with G92 and M206
8 years ago
4902fd4e95
More data in UBL class, make it a static class
...
- Make all `unified_bed_leveling` data/methods static
- Move some UBL-related variables into the class
- Replace `map_[xy]_index_to_bed_location` with `mesh_index_to_[xy]pos`
8 years ago
edbc024d76
Disable UBL_G26_MESH_EDITING by default
8 years ago
9e4bd6b3b5
Further repairs to UBL, comments, spacing
8 years ago
f3618c3337
Reduce UBL RAM usage by making G26/G29 optional
8 years ago
c9eb1d6ab7
Make MBL a static class, use lookup for index-to-point conversion
8 years ago
de9d2cddc3
Merge pull request #6152 from thinkyhead/rc_cleanup_6150_etc
...
UBL cleanup, optimization
8 years ago
9217e4b8ec
Various UBL cleanups and bug fixes
8 years ago
9924199802
Merge pull request #5908 from thinkyhead/rc_fix_slowdown
...
General minor cleanup
8 years ago
0e71e7b2fb
Cleanup to planner.cpp
8 years ago
f105cad43c
Marlin: Slight cleanup to Marlin_main.cpp
8 years ago
499f9e04e1
Marlin: Temperature soft-PWM cleanup
8 years ago
7ddd94dc61
Merge pull request #5994 from StefanBruens/fix_Makefile_errors
...
Fix makefile errors, cleanup
8 years ago
af09095f03
Merge pull request #6154 from thinkyhead/rc_fil_sensor_vs_sd
...
Show Filament Width on LCD when SD is disabled
8 years ago
d38b1bc4b1
Show filament width sensor values in LCD constantly if SD card support is not enabled.
8 years ago
e3459ec178
Merge pull request #5989 from MagoKimbra/rc_fix_delta_angles
...
Fix delta_angles
8 years ago
f49aec057f
Tweak "can not" => "can't" in RUMBA pins
8 years ago
0a23a1bb3b
Dynamic feedrate on SCARA, converting target mm/s to deg/s
8 years ago
d8724bb546
Get G29's P1 (Automated Probing) working again.
...
Incorrect optimizations of data types and ternary operators caused some
issues.
8 years ago
c7f6ee9c93
Board A4JP should be SCOOVO_X9H
8 years ago
a9fc30ae2e
Use safe_delay to ensure watchdog reset
8 years ago
171904b6c7
Make G29 What command print reliably and fix G29 P1 bug Waldo found
8 years ago
9d3ac66f73
Map clean up of UBL
...
UBL's maps are cleaner. And with a 1 value, G29 O 1 will generate a
map suitable to be Cut & Pasted into Excel so a Suface Map can be
generated.
8 years ago
9a1949a91e
Cleaned up G26 ready to replace existing one at MarlinFirmware/Marlin
8 years ago
aec85ad45a
Start of process to get UBL running again.
...
The wait_for_user change totally broke UBL. But there is stuff wrong
now in the thermal code and/or LCD Panel code.
8 years ago
b47eaf14ae
Merge pull request #6109 from thinkyhead/rc_soft_pwm_dither
...
PWM dithering followup
8 years ago
34d1c41b5f
Merge pull request #6111 from benlye/benlye-patch-echo_command
...
Fix type conversion issue with echo_command
8 years ago
6a601aca35
Fix type conversion issue with echo_command
...
With the the current definition of echo_command I cannot compile RCBugFix (Arduino IDE 1.8.1) with the error "invalid conversion from 'const char*' to 'char*'". This change resolves that.
8 years ago
009a6ddd39
Adjust bilinear grid in M851
8 years ago
eab7854a73
Merge pull request #6074 from thinkyhead/rc_immediate_shove
...
Immediate commands take precedence
8 years ago
5699e2b881
Add SOFT_PWM_DITHER to other configurations
8 years ago
5a2abeca78
Merge pull request #6100 from thinkyhead/rc_soft_pwm_dither
...
Enhancement of PWM, with dithering
8 years ago
043be2856b
Use "& 0x3F" instead of "% 64"
8 years ago
6a040a6967
SOFT_PWM: Do not switch off heaters twice on pwm_count wraparound
...
After wraparound, pwm_count <= pwm_mask holds, thus soft_pwm_X <= pwm_count
guarantees soft_pwm_X < pwm_mask is true, and the heater will be switched
off in the first branch.
Do not evaluate the pwm conditions a second time, this reduces the
instruction count (4 instructions per PWM) and text size (6 byte).
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
8 years ago
0a74774af1
soft_pwm: avoid useless refetches of pwm_count
...
The compiler is not able to reuse the value of pwm_count, but reloads it
on every evaluation, if is stored in a static variable, as it cannot prove
it will be unchanged. A variable with local scope may not be modified from
the outside, so its value can be reused.
Doing so reduces text size and instruction count.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
8 years ago
35a55d5757
SOFT_PWM: Implement dithering if SOFT_PWM_SCALE is 1 or more
...
If dithering is enabled, the remainder of the soft_pwm_X duty value at
turnoff time is added to the next cycle. If e.g. the duty is set to 9 and
SCALE is set to 2, the PWM will be active for 8 counts for 3 cycles and
12 counts on each fourth cycle, i.e. the average is 9 cycles.
This compensates the resolution loss at higher scales and allows running
fans with SOFT_PWM with significantly reduced noise.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
8 years ago
2aed66a955
temperature: Fix SOFT_PWM off by one
...
A 128 step PWM has 127 intervals (0/127 ... 127/127 duty). Currently, a
PWM setting of 1/127 is active for 2/128, i.e. double the expected time,
or, in general n+1/128 instead of n/127.
Fixes issue#6003.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
8 years ago
b5711a99a2
Patches to bring UBL closer to compliance
8 years ago
d076c1b604
Apply some general cleanup to code
8 years ago
d1e6b0e21a
Reduce STEP_PULSE_CYCLES code slightly
8 years ago
783338a0b8
Add UBL_MESH_EDIT_ENABLED to configs
8 years ago
8d54ffbf05
Adjust vector_3 code with const, some optimization
8 years ago
8ee2612ebb
The hex nibble routine can print again!
...
The code to print a hex nibble got broke. SERIAL_ECHO( (char) ) isn't
suitable for its use.
8 years ago
b8e4a6970b
Get UBL up and running again
...
All the changes to get the code into compliance with Marlin coding
standards made UBL sick. This pretty much gets UBL back up and
running.
8 years ago
5de1da2b3c
Make UBL honor the #define ENABLE_LEVELING_FADE_HEIGHT option
8 years ago
8f9face956
Merge pull request #6088 from rafaljot/patch-3
...
Update Marlin_main.cpp
8 years ago
782634b6c9
Merge pull request #6081 from Sebastianv650/MIN_STEPPER_PULSE_for_Babystepping
...
Add MINIMUM_STEPPER_PULSE ability to babystepping
8 years ago
af2ea23e9c
EXTRUDER_RUNOUT_PREVENT uses buffer_line_kinematic
8 years ago
cd882b88db
#if defined => #ifdef / PIN_EXISTS
8 years ago
e244399766
Additional cleanup of UBL code
8 years ago
0934563b97
G38 optional double touch
...
Made the double touch portion a conditional compile based on the
PROBE_DOUBLE_TOUCH flag.
==============================================
Bugfix
The current G38 only stopped a move if it involved the Z axis.
Moved all the G38 code to it's own section and put it where it would
always be executed no matter what axis was moving or if the endstop was
enabled.
Also added a comment to configuration_adv to alert the user the double
tap had to be turned on.
==============================================
Change G38 back to using Z_MIN_PROBE
There's no Z_MIN endstop if Z_DUAL_ENDSTOPS is enabled and you have them
set to the top of the gantry.
G38 started out as using the Z_MIN_PROBE pin. I don't remember why we
changed it to the Z_MIN endstop.
8 years ago
cc3204509c
UBL patch from Bob-the-Kuhn
8 years ago
b904b5ae8d
Audible feedback for settings store/load/reset
8 years ago
bf57eb2447
Protect Babystepping against other ISRs
...
Especialy against stepper ISR.
This is even more important when a minimum pulse width is set,
increasing the runtime of a babystep.
8 years ago
80830919dc
Add MINIMUM_STEPPER_PULSE ability to babystepping
8 years ago
6da949bbf0
Update Marlin_main.cpp
...
Sometimes after killing heaters are still on.
8 years ago
72f7b14e66
Make G29's Interactive Mesh Editor Work
8 years ago
3fd74b121f
Get G29's Interactive Mesh Editor running
...
G29 P4 R O should work now.
8 years ago
1d58558bec
Spelling fix
8 years ago
2573f4dd05
Merge pull request #6052 from thinkyhead/rc_lift_on_pause
...
Add PARK_HEAD_ON_PAUSE feature / M125
8 years ago
48c6284c91
Immediate commands take precedence
8 years ago
76c270fdf2
Allow FWRETRACT with UBL Enabled
...
The retraction flag in UBL's G26 was conflicting with the FWRETRACT option.
All fixed!
8 years ago
c377c59d47
Allow G29 P1 R to generate the mesh
...
Fix the logic change that happened when UBL got merged.
8 years ago
ff0dd162b7
PARK_HEAD_ON_PAUSE implementation
8 years ago
26473cab6d
Add PARK_HEAD_ON_PAUSE feature
8 years ago
4cf51157b3
Use XYZE rather than NUM_AXIS
8 years ago
4c7f14752a
Add disable_e_steppers function
8 years ago
8eb29f91e6
Patch filament change options and beep code
8 years ago
56c9dfc83b
Merge pull request #6066 from thinkyhead/rc_felix_fix
...
Update Felix config for UBL
8 years ago
9b2b53f63a
Merge pull request #6042 from thinkyhead/rc_fix_toolchange_z
...
Move Z last in tool-change for SWITCHING_EXTRUDER
8 years ago
f98fb6b38e
Update Felix config for UBL
8 years ago
7cabe81373
Merge pull request #6057 from thinkyhead/rc_followup_6054
...
Followup 6054 with some cleanup
8 years ago
4bca27ab89
Fix Kelvin conversion
...
Thanks to @ospalh -- #6056
8 years ago
143ab8f329
Remove Roxy's personal configurations
8 years ago
2512871a36
Patch configs UBL followup
8 years ago
27b5666e15
Move Allen Key probe definition to the top
8 years ago
77cf648ed3
Move menu selection past static items in 1 screen
8 years ago
2c630a1b5c
Merge pull request #6054 from thinkyhead/rc_ubl_renewal
...
UBL for RCBugFix — cleanup, rebase, patch
8 years ago
0492a3a8f1
Merge pull request #6027 from Bob-the-Kuhn/add_kill_info
...
Message for every KILL and STOP
8 years ago
6618346148
Patches to work around "register spill" compiler bug
8 years ago
be7dd90382
Add Thermistor 75: MGB18 silicon pad
8 years ago
b0a9c82c31
Fix single-char echo and pinMode usage
8 years ago
fb60aa3736
UBL implementation
8 years ago
238b8fd2a3
UBL core and support files
8 years ago
cf94688925
Univeral Bed Leveling - configuration
8 years ago
03aa424ccb
Merge pull request #6053 from thinkyhead/rc_clean
...
Remove extraneous whitespace
8 years ago
af644871bf
Merge pull request #6045 from thinkyhead/rc_remove_raw_kinematics
...
Remove delta optimization concepts… for now
8 years ago
77491dd924
Remove extraneous whitespace
8 years ago
b865b21d32
Can't use Z fade height with DELTA
8 years ago
1e57b0c269
Remove delta interpolation concept
8 years ago
e46898f8e5
Remove kinematic optimizations
8 years ago
11f1fdfab4
_lcd_level_bed_position => manual_probe_index
8 years ago
0e410c9dfd
Software endstop options as simple switches
8 years ago
d01b915085
Implement soft_endstops_enabled for clamping
8 years ago
e4649c9044
Add HAS_SOFTWARE_ENDSTOPS macro
8 years ago
3e927ff204
Replace MBL Z hacking
8 years ago
4e53124681
Merge pull request #6039 from Bob-the-Kuhn/M114-sync-with-stepper
...
M114 - wait for move completion before reporting position
8 years ago
734f9ea133
Merge pull request #6040 from thinkyhead/rc_sanity_use_assert
...
Simplify some sanity checks with static_assert
8 years ago
f02af83d42
Remove some extraneous spaces
8 years ago
672e45652e
Improved solution to tool-change bug
8 years ago
23f1cfb46f
Fix stuck CHDK pin as suggested in #6041
8 years ago
0b22069e82
Merge pull request #6021 from Bob-the-Kuhn/BUG-FIX--Switching-extruder-tool-change-Z-height
...
Bug Fix: Switching extruder tool change leaves Z in wrong position
8 years ago
e7e4500629
Simplify some sanity checks with static_assert
8 years ago
34ff0c3439
M114 - wait for move completion before reporting position
8 years ago
b31604a492
Message for every KILL and STOP
...
No more mystery halts & resets
Moved messages to language.h
Added current command to inactive timeout message
8 years ago
13b44d019b
Update language_de.h
...
Addition of missing strings to match language_en.h
8 years ago
685ed5393a
Bug Fix: Switching extruder tool change leaves Z in wrong position
...
The tool_change function saves the current_position to the destination
array soon after starting. Later in the switching extruder section, the
destination array is modified when moving the Z axis up & down. A later
section of tool_change moves the head back to the “original location”
using the destination array. This later section assumes that the
destination array hasn’t been modified.
The fix is to save the destination Z position and then restore it after
the Z movements have completed.
Going back to using the current_position array for the switching
extruder Z axis moves (and leaving the destination array untouched)
doesn’t fix the problem.
This bug was introduced by the “Make tool_change kinematic compatible”
commit # 847429eff4
8 years ago
51353f8fea
Merge pull request #6000 from trivalik/NoWorkspaceWarning
...
prevent warning with define of NO_WORKSPACE_OFFSETS
8 years ago
a4a9bd8bc9
Fix BUG set_position_mm
...
Set postion must have axis and not E_AXIS + active_extruder.
8 years ago
71ac6f9d42
prevent warning with define of NO_WORKSPACE_OFFSETS
8 years ago
9ba6c051a1
Makefile: add nozzle.cpp too CXXSRC list
...
The file is required by the optional NOZZLE_PARK_FEATURE.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
8 years ago
9cc8d495b8
Makefile: remove no longer existing search paths
...
ArduinoAddons has been removed from Marlin, remove any references to it.
Replace HARDWARE_SRC and HARDWARE_DIR with its expanded equivalents.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
8 years ago
bf563e62c1
Makefile: add printcounter.cpp too CXXSRC list
...
The file is required by the optional PRINTCOUNTER feature.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
8 years ago
ddecc1441d
Makefile: Fix linker error
...
Instantiation of the static singleton instance thermalManager in general
requires locking, but we know its safe to do without.
Add -fno-threadsafe-statics to avoid using locking primitives, which
result in linking errors:
undefined reference to `__cxa_guard_acquire'
undefined reference to `__cxa_guard_release'
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
8 years ago
37a26dfc09
Fix delta_angles
8 years ago
2defb1d748
Use SET_INPUT_PULLUP where appropriate
8 years ago
58b3e98878
Use arrays for delta tower parameters
8 years ago
47242a40bb
Apply updated changes for delta_tower_angle_trim
8 years ago
00b6b3da79
Added support for delta tower angle corrections.
8 years ago
5a456c832a
Apply TMC2130 to example configurations
8 years ago
45f949d833
TMC2130 Library: @teemuatlut replaces @makertum
8 years ago
33f8a8a344
Merge pull request #5973 from thinkyhead/rc_circle_pattern
...
Add circle pattern to nozzle clean
8 years ago
94b3e0a483
Merge pull request #5959 from benlye/benlye-fixm48
...
Remove extra carriage return in M48 V1 output
8 years ago
a9a1971295
Merge pull request #5972 from thinkyhead/rc_cooldown_before
...
Fix preheat menu formatting
8 years ago
6aa81255a9
Patch and clean up "flsun" kossel. Followup to #5911 .
8 years ago
b2270b3f3e
Apply prior nozzle clean update
8 years ago
7698c5617a
Added circle nozzle cleaning parameters to example configurations
8 years ago
6836b94eea
Added circle pattern for nozzle cleaning feature
8 years ago
3b75518ef6
Merge pull request #5911 from aphex3k/flsun_kossel_mini
...
Configuration.h and Configuration_adv.h for the kossel mini by flsun
8 years ago
3830778852
Apply NO_WORKSPACE_OFFSETS to lcd menu
8 years ago
7e3aab889d
Fix preheat menu formatting
8 years ago
fea0d3f20f
Endstop and temp-isr general cleanup
8 years ago
aef08e8780
Compact some macro substitutions
8 years ago
2f620f86d9
Merge pull request #5970 from thinkyhead/rc_cooldown_before
...
Preheat Hotend Only menu items
8 years ago
02de8e6f18
Merge pull request #5957 from MagoKimbra/rc_stepper_indirection_fix
...
Stepper indirection fix tmc driver
8 years ago
6c5312559c
Menu item to preheat only the hotend
8 years ago
9d0142e8ae
Move Change Filament above Cooldown
8 years ago
0c55095c5e
Move Cooldown above Preheat
8 years ago
c15c65f18a
Merge pull request #5971 from thinkyhead/rc_fix_e_factors
...
Patch DISTINCT_E_FACTORS bug
8 years ago
bfb0007573
Patch DISTINCT_E_FACTORS bug
8 years ago
be98016674
Merge pull request #5963 from thinkyhead/rc_no_offsets_optim
...
New option: NO_WORKSPACE_OFFSETS
8 years ago
8e89a802f7
Document PROTOCOL_VERSION
8 years ago
87b03b16bd
Use a macro for array copies
8 years ago
e141f3a03f
Optimize coordinate transformation
...
Pre-compute the combined position shift and home offset to save a
single float fetch-and-add per conversion. Great for delta/scara and
bed leveling.
8 years ago
5f7e85398b
Implement NO_WORKSPACE_OFFSETS
8 years ago
05abe853f9
New option: NO_WORKSPACE_OFFSETS
8 years ago
20addc6e32
Merge pull request #5955 from thinkyhead/rc_eeprom_fail_better
...
Display a message for EEPROM version mismatch
8 years ago
dead89062a
Update Marlin_main.cpp
...
Remove unnecessary line break from M48 V1 output.
8 years ago
ae277aebc6
Stepper indirection fix tmc driver
8 years ago
8f4e4b1995
Display a message for EEPROM version mismatch
8 years ago
177ad245f6
Merge pull request #5953 from thinkyhead/fix_fc_e_index
...
Fix submenu hotend status display
8 years ago
cea3ea772c
Fix submenu hotend status display
8 years ago
b27f69ba51
Merge pull request #5813 from thinkyhead/rc_fix_makrpanel
...
Fix MAKRPANEL assignments
8 years ago
1ef6ccd919
Merge pull request #5951 from thinkyhead/rc_print_2d_array
...
Reduce code size (40b, or 166b with bilinear subdivision)
8 years ago
53f5086905
Fix MAKRPANEL assignments
...
MAKRPANEL is a DOGLCD+ULTRA_LCD+NEWPANEL so customize its pins within
that block.
8 years ago
98c7b682ca
General cleanup, const usage, var naming
8 years ago
369bfc8a1e
Reduce code size (40b, or 166b with bilinear subdivision)
8 years ago
0d13412105
Fix "Heating..." message
8 years ago
5065636023
Merge pull request #5934 from thinkyhead/rc_advance_ed_ratio
...
LIN_ADVANCE: Fixed E/D ratio option
8 years ago
75ad82baab
Update Catalan language
8 years ago
34253497d4
Babysteps code tweak
...
As suggested by https://github.com/MarlinFirmware/Marlin/pull/5887#issuecomment-283832163
8 years ago
fb4aead2b1
Clean up and finish #5887
8 years ago
b3e2bd6f29
Reduce E_D_ratio code
8 years ago
de6c40ed8f
Add option to fix E/D ratio
...
Work around for slicers producing buggy gcode.
8 years ago
eeb490221f
Remove BEEPER_PIN override in pins_RIGIDBOARD.h
...
Resolves #5926 . This override is no longer needed since the RAMPS LCD controller pins were fixed.
8 years ago
11e892bd84
Merge pull request #5887 from Roxy-3D/RCBugFix
...
Double Click of Encoder Wheel Jumps to Z-BabyStepping
8 years ago
cbeff12f8a
Merge pull request #5933 from teemuatlut/lcd_days_hours
...
Fix formatting of SD print time hours above one day
8 years ago
8a4e9d08a3
Merge pull request #5931 from thinkyhead/rc_core_endstop_fix
...
Fix CoreYX / YZ / ZX endstop logic
8 years ago
9175d16660
Fix formatting of print time hours above one day
8 years ago
b6d9eb229f
Extend Core endstop commentary
8 years ago
c5e08e8761
CoreYX/YZ/ZX needs different endstop logic than CoreXY/YZ/XZ
...
In the endstop testing section, add the "reverse" logic in addition to "normal" core handling.
In CoreXY/YZ/XZ steppers rotating the same direction gives X movement. Opposing directions produces Y movement.
In CoreYX/ZY/ZX this is reversed. Same = Y, Opposite = X.
----
Fixes the issue where the Y endstop was being checked when moving in the X direction, etc.
8 years ago
c759c26cca
Make LCD_TIMEOUT_TO_STATUS configurable
...
As suggested in
https://github.com/MarlinFirmware/Marlin/issues/5570#issuecomment-283059
065
8 years ago
47729918fc
enable ENSURE_SMOOTH_MOVES
8 years ago
330b981912
created Configuration.h and Configuration_adv.h for the kossel mini sold by flsun
8 years ago
48b7e0f8d8
Nozzle Wipe Vertical Zig-Zag
...
- Add configuration support for zigzags in either the X or Y axis, for
wipe pads significantly longer in one dimension.
- Add configuration for default number of zig-zag triangles, vs. a
magic number in `Marlin_main.cpp`.
- Update description of auto nozzle wiping to match functionality
8 years ago
f17b81b765
Add MAPPER_C2C3 to French language
8 years ago
7e607b06eb
Better comments on DOUBLE_CLICK_TIME_WINDOW
8 years ago
34cba42104
Use PSTR for MSG_HEATING
8 years ago
584d147a02
fixup the indentation
8 years ago
e443e0e2a9
Fix scoping issues for double click to Z-Babystepping
8 years ago
17d1cd7c09
Double Click of Encoder Wheel Jumps to Z-BabyStepping
8 years ago
48d862377a
Double Click of Encoder Wheel Jumps to Z-BabyStepping
8 years ago
cfdc189796
Merge pull request #5856 from thinkyhead/rc_fix_bad_comment
...
Remove non-applicable comment on MANUAL_Z_HOME_POS
8 years ago
cd68380ce6
Add status_printf to print messages to the lcd status line.
...
Also add a hotend indicator to the heating message displayed on the lcd status line.
8 years ago
012aff6823
Merge pull request #5862 from thinkyhead/rc_fix_a_thing
...
Finish reducing of ABL_BILINEAR_SUBDIVISION
8 years ago
b9187020c4
Finish reducing of ABL_BILINEAR_SUBDIVISION
8 years ago
e282b72151
Remove non-applicable comment on MANUAL_Z_HOME_POS
8 years ago
57f92a4632
Apply DISTINCT_E_FACTORS to sync_from_steppers
...
Followup to #5840
8 years ago
4da8b1494b
Merge pull request #5854 from thinkyhead/rc_fixup_m600
...
M600 cleanup and bugfix
8 years ago
dd02dba6e6
Merge pull request #5840 from MagoKimbra/rc_fix_lin_advanced_step_to_mm
...
Fix steps_to_mm for active extruders
8 years ago
6e0b3fcc08
Optimize M600 heater status LCD items
8 years ago
44b4e116bd
Commentary / style in gcode_M600
8 years ago
561904345f
Tweak config ordering for M600
8 years ago
284d6de9da
Remove some old code comments
8 years ago
3685224c1a
Fix steps_to_mm for active extruders
8 years ago
4578c573fe
Pause the print job timer while in M600
8 years ago
bfe6f71794
Simplify filament_change_beep function
8 years ago
8289ea1316
Use a short name for the filament "endstop"
8 years ago
d9dcef8a87
Spacing, coding standards
8 years ago
931914e679
Apply M600 updates to all configs
8 years ago
8bf0b496b9
Improve M600 with timeout, wait for heatup.
8 years ago
c40fe2113c
Fix for broken MBL
...
LCD call was waiting forever, causing the system to hang.
8 years ago
4d4745c0eb
Parenthesize some menu defines for safety
8 years ago
47f9883b0f
Dynamic allocation for SDCARD_SORT_ALPHA
8 years ago
a561bd5e3a
New feature: SDCARD_SORT_ALPHA
8 years ago
c04d6b5aa6
Merge pull request #5829 from thinkyhead/rc_fix_isr_reentry
...
Combine fixes for LIN_ADVANCE and temperature ISR
8 years ago
467f01435f
Merge pull request #5816 from thinkyhead/rc_abl_virt_reduce
...
Reduce memory use by ABL_BILINEAR_SUBDIVISION slightly
8 years ago
97b6fb6381
Reduce / optimize LIN_ADVANCE code
8 years ago
271ced7341
Prevent re-entering of temperature ISR
...
If Marlin is inside the temperature ISR, the stepper ISR is enabled. If
a stepper event is now happening Marlin will proceed with the stepper
ISR. Now, at the end of the stepper ISR, the temperatre ISR gets enabled
again. While Marlin proceed the rest of the temperature ISR, it's now
vulnerable to a second ISR call.
8 years ago
1b59766fcb
Cleanup position_float
...
Hopefully fixes Marlin #5481
8 years ago
a950c31e2d
Merge pull request #5815 from thinkyhead/rc_pulses_per_step
...
Give encoder pulse/steps conditionals their own block
8 years ago
7176de8605
Merge pull request #5814 from thinkyhead/hotend_loop_always
...
Make HOTEND_LOOP more consistent, let compiler optimize it
8 years ago
adec219ca5
Merge pull request #5811 from thinkyhead/fix_two_strings
...
No space after X: or A: in M114 output
8 years ago
eaa829b58c
Reduce memory use by ABL_BILINEAR_SUBDIVISION slightly
8 years ago
1c99ca82d8
Give encoder pulse/steps conditionals their own block
8 years ago
e44294bb4d
Make HOTEND_LOOP more consistent, let compiler optimize it
8 years ago
701f4a6d9d
Merge pull request #5729 from Bob-the-Kuhn/guaranteed-BLTouch-detection
...
guaranteed BLTouch detection
8 years ago
c15b9a6a06
No space after X: or A: in M114 output
8 years ago
e1702816f6
Fix SD_CHECK_AND_RETRY condition
...
Addressing #5806
8 years ago
1bc5be3bdf
Cast DELTA_PRINTABLE_RADIUS to float in sq()
...
Addressing #5625
8 years ago
0369f97ec1
guaranteed BLTouch detection
...
To guarantee that the 5mS pulse from a BLTouch is recognized you need to
have the endstops.update() routine run twice in that 5mS period.
At 200 steps per mm, my system has problems below a feedrate of 120 mm
per minute.
Two things were done to guarantee the two updates within 5mS:
1) In interrupt mode, a check was added to the temperature ISR. If the
endstop interrupt flag/counter is active then it'll kick off the endstop
update routine every 1mS until the flag/counter is zero. This
flag/counter is decremented by the temperature ISR AND by the stepper
ISR.
2) In poling mode, code was added to the stepper ISR that will make sure
the ISR runs about every 1.5mS. The "extra" ISR runs only check the
endstops. This was done by grabbing the intended ISR delay and, if it's
over 2.0mS, splitting the intended delay into multiple smaller delays.
The first delay can be up to 2.0mS, the next ones 1.5mS (as needed) and
the last no less than 0.5mS.
=========================================
BLTouch error state recovery
If BLTouch already active when deploying the probe then try to reset it
& clear the probe.
If that doesn't fix it then declare an error.
Also added BLTouch init routine to startup section
8 years ago
1e4d4e5915
Fix typo in language_uk
...
Thanks to @pavlus for this one
8 years ago
7fe7a0c8be
Merge pull request #5793 from thinkyhead/rc_adjust_probe_output
...
Adjust probe_pt() terminal output to respect probe z-offset
8 years ago
633c253bc1
Merge pull request #5792 from thinkyhead/rc_default_dac_vals
...
Default DAC values for RigidBoard V2
8 years ago
7bbc31704c
Adjust probe_pt() terminal output to respect probe z-offset
8 years ago
a245656db3
Merge pull request #5713 from gege2b/RCBF-French
...
French translation : Added missing strings as well as missing accents
8 years ago
713931338a
Default DAC values for RigidBoard V2
8 years ago
ae706233a8
pinsDebug for 644/1284 & USB646/1286 families
...
added conditional compilation for PWMs 1C & 3C
add Teensyduino compatibility
==========================================
changes per review - minor formatting changes
1) remove non-printable character at the end of line 687
2) split a really long comment into two lines
3) got rid of some trailing spaces
============================================
Made pinsDebug_Teensyduino.h the same between this PR and PR 5668 which
is for a re-written pinsDebug.h file.
The changes were:
1) added copyright @ GNU license header
2) a blank line crept in.
8 years ago
22dfcc9a71
French translation : Added missing strings as well as missing accents
8 years ago
9b5515926a
Merge pull request #5696 from thinkyhead/rc_volumetric_default
...
Allow enabling volumetric filament on config load
8 years ago
0d147ead66
Allow enabling volumetric filament on config load
8 years ago
fa26767efe
Replace all remaining 'boolean' with 'bool'
8 years ago
f6858d9974
Fix M110 without leading N
...
Store N in the right variable.
This is too rarely used.
"mea culpa, mea culpa, mea maxima culpa"
8 years ago
0c0c840ba8
Merge pull request #5683 from emartinez167/EMartinez-Changes
...
Updates to some incorrectly ended strings in the Spanish translation
8 years ago
25dae3bccc
Update language_de.h
...
Small corrections
8 years ago
7292145f4e
Fix for some wrong strings
...
On last commit, some strings were ended with the incorrect character.
This fixes it.
8 years ago
93a9aa6b76
Merge pull request #5682 from thinkyhead/rc_spanish_jan
...
Updates to Spanish language
8 years ago
7a9c1a279b
Merge pull request #5681 from thinkyhead/rc_prevent_boot_loop
...
Reset watchdog in SD init to prevent reboot
8 years ago
e409c7f9e8
Merge pull request #5645 from esenapaj/From-microseconds-to-milliseconds
...
From "microseconds" to "milliseconds"
8 years ago
020c6af7b0
Updates to Spanish language
...
Add missing Spanish language definitions.
8 years ago
d29cc8f7bc
Reset watchdog in SD init to prevent reboot
...
If the watchdog is enabled and bootscreen + SD card checks take too long, Marlin may hang at boot time because of the reset loop. We have this happen all the time with the Anet board if no SD card is inserted.
8 years ago
7743849608
Merge pull request #5680 from thinkyhead/rc_configs_puhlease
...
code_value_float tweak
8 years ago
16357fbfdf
Merge pull request #5619 from Ocarthon/RCBugFix
...
Disable SD Detect for K8400
8 years ago
e57c0fce66
Move MOSFET changes above #include for RIGIDBOARD
...
Correction to #5629
8 years ago
c376f6a2cb
code_value_float tweak
8 years ago
fb3c30e24c
Fix lcd_wait_for_homing causing menu to block
...
As a showcase function for how to do waiting in the lcd menu, this function should be preserved.
8 years ago
f8ae0fd29f
Merge pull request #5647 from manianac/RCBugFix-PrepareMenuFix
...
Fix empty Prepare menu
8 years ago
aab5118c6a
Remove error causing break command
...
Use index macro instead of e
8 years ago
d38e335272
From "microseconds" to "milliseconds"
...
delay() is milliseconds
8 years ago
8ae2bc7e2e
Disable SD Detect for K8400
8 years ago
4061fca1ad
Sanity checks for FILAMENT_CHANGE_FEATURE and FILAMENT_RUNOUT_SCRIPT
8 years ago
5ab7b91615
Comment on filament runout sensor config
8 years ago
922c67f17d
Merge pull request #5588 from thinkyhead/rc_remove_biv25
...
Drop biv2.5 delta configurations
8 years ago
8c6c048551
drop biv2.5 delta configurations
8 years ago
92dbeebf40
Define ADV_NEVER, ADV_RATE
8 years ago
306c184b1a
Allow M600 when dryrun debugging
8 years ago
fe2ea2906f
Merge pull request #5573 from thinkyhead/rc_unify_stepper_isr
...
LIN_ADVANCE with unified stepper ISR
8 years ago
84c685f8b5
First draft of Unified Stepper / E Advance ISR
8 years ago
83021d82c6
Merge pull request #5502 from AnHardt/symbol-strings
...
Add symbol-strings
8 years ago
036eccfd6e
Merge pull request #5572 from Kaibob2/patch-5
...
Update language_de.h
8 years ago
b794b76836
Merge pull request #5567 from AnHardt/fix5194
...
Fix 5194
8 years ago
451ba5df01
Merge pull request #5516 from esenapaj/Suppress-warning
...
Suppress warning
8 years ago
92dbc63949
Merge pull request #5571 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
8 years ago
ade72535c4
Update language_de.h
...
Added tarnslation for
```
#define MSG_DEBUG_MENU
#define MSG_PROGRESS_BAR_TEST
```
8 years ago
ab6b005867
Suppress warning
8 years ago
61f15ef7e7
Fix 5194
...
I have been a bit too radical in cleaning up this section.
8 years ago
60515ff700
Update Japanese translation
...
・Add new translation
8 years ago
1e419655f3
Followup to #5550 - spacing before "mm"
8 years ago
1a26ce1cdc
Merge pull request #5550 from FHeilmann/patch-2
...
Allow negative retract values in the LCD
8 years ago
bec30c89e7
Merge pull request #5522 from esenapaj/Add-description-for-dual-x
...
Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE
8 years ago
7739c0affa
Change "+mm" to "mm" in most languages
...
- Japanese and Chinese still need update
8 years ago
1cba425308
Allow negative recover-swap length from LCD
8 years ago
298a8c6a3c
Merge pull request #5561 from thinkyhead/rc_no_case_light
...
Support for M335 case light "no case light"
8 years ago
644f45cbd8
Merge pull request #5563 from akaJes/m600
...
FILAMENT_CHANGE_FEATURE allowed in idle mode
8 years ago
0d2fc13516
Place "Level Bed" closer to "Auto Home"
8 years ago
b031d28ebf
Encoder events should not skip stripes
8 years ago
22881f38b9
Fix updating of "bool" menu items
8 years ago
eb68715b94
No "Cooldown" menu if heaters are off
8 years ago
4ed976b5ff
m600 fixes
8 years ago
4e2639942b
Support for M335 case light "no case light"
8 years ago
18ba31e9b5
Add Debug Menu with LCD_PROGRESS_BAR_TEST as an example
8 years ago
03af5961b0
Hide (or remove) custom character change on boot screen
8 years ago
1642f5ed31
Add macro to some en strings
8 years ago
dbb2d56c89
Correct comment on watchdog timer
8 years ago
41a30923f3
Merge pull request #5559 from thinkyhead/rc_minimum_gcc_version
...
Throw an error for gcc before 4.7
8 years ago
6d6a1db6ec
Apply const to _EEPROM_writeData value param
8 years ago
f724ef5820
Have bed leveling status output current status, not requested.
8 years ago
20218e553d
Merge pull request #5527 from MagoKimbra/rc_configuration_store_fix_size
...
Fix size
8 years ago
dcfbe2bd3c
Throw an error for gcc before 4.7
8 years ago
82fde7df2e
Merge pull request #5512 from AnHardt/speed-compare-bbr
...
Optimize handling of block_buffer_runtime()
8 years ago
8986225752
Spacing, cleanup in speed_lookuptable.h
8 years ago
e12c8e5cac
Split up thermistor tables
8 years ago
a7334fd2a0
Allow negative retract values in the LCD
...
This can already be done via G-Code, so adding the capability to the LCD should be straight forward.
8 years ago
292eb365c6
Optimize handling of block_buffer_runtime()
...
millis_t is long - divisions take for ever.
Return a kind of millisecond instead of microsecond -
divided by 1024 instead of 1000 for speed. (2.4% error)
That does not matter because block_buffer_runtime is
already a too short estimation.
Shrink the return-type.
8 years ago
6854f44bf2
Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE
8 years ago
3f6f036f7c
Merge pull request #5524 from thinkyhead/rc_optional_dogm_splitup
...
Report EEPROM data size, not final index
8 years ago
86ba7e4542
Fix size
...
Fix size for writeData and readData.
For bilinear grid 11 x 11 for example, size is 4 (float) x 11 x 11 = 484. uint8_t max is 255.
8 years ago
f9f75c8016
Fix USE_RAW_KINEMATICS in prepare_kinematic_move_to
8 years ago
87921f390a
Clarify what are "logical" positions in the planner
8 years ago
a4f10f59c3
Write the E parameter length correctly
8 years ago
2e904cb4f9
Merge pull request #5514 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
8 years ago
0b6817e0f9
Merge pull request #5505 from android444/patch-4
...
Update for translations language_pl.h
8 years ago
3bd76f60e4
Report EEPROM data size, not final index
8 years ago
78d6d6e076
Merge pull request #5452 from thinkyhead/rc_save_your_mesh
...
Save Bed Leveling to EEPROM
8 years ago
0d0aa6c20d
Patch type for max_acceleration_mm_per_s2 save/restore
8 years ago
d4f5418802
Merge pull request #5517 from esenapaj/Fix-for-PR-#5255
...
Fix for the PR #5255 (Case light menu (3rd attempt))
8 years ago
fa7010b0a1
Merge pull request #5515 from esenapaj/Remove-unnecessary-tabs-and-spaces
...
Remove unnecessary tabs and spaces
8 years ago
6d7b1cdf6c
Add M421 for ABL Bilinear
8 years ago
32e65dc429
Extend `M420` to print state and, with `V`, the matrix / mesh
8 years ago
d04258753b
Don't throw away the bed level matrix on G28
8 years ago
8f0f225d10
Save ABL Planar Matrix to EEPROM
8 years ago
e2429a9da1
Generalize Bed Leveling flag in EEPROM
8 years ago
e42fd7813a
Save ABL Bilinear Grid to EEPROM
8 years ago
492b68f8e3
Better EEPROM read/write error handling
8 years ago
55722c09da
Use "UNPROBED" for un-probed bed_level_grid points
8 years ago
2643404ac8
Throw an error in M420 if can't enable
8 years ago
b1539394fd
Use planner.unapply_leveling to undo tilt in G29
8 years ago
04636f78eb
Re-enable MBL/ABL after M48
8 years ago
9b41638672
Minor tweak to G29 grid points
8 years ago
daa2cad21f
Fix comment on G29 to include 'Z'
8 years ago
8244fefcc2
Tweak call to `reset_bed_level` in G29
8 years ago
0995a5d734
Fixup reset_bed_level
8 years ago
1b2fb2bdc7
ABL_GRID_POINTS_* => ABL_GRID_MAX_POINTS_*
8 years ago
d486361c69
Fix for commented section of Config_RetrieveSettings()
8 years ago
88157ba529
Fix for the PR #5255 (Case light menu (3rd attempt))
8 years ago
069c6b38dd
Remove unnecessary tabs and spaces
8 years ago
9c8116aedf
Update Japanese translation
...
・Add new translation
8 years ago
57b1275cde
Add symbol-string to _de
...
Add symbol-string for _de
to reduce the frquencey of regenerating 'mappers' and 'fonts'
with the new utf-system.
8 years ago
3363d2c937
Update for translations language_pl.h
8 years ago
06af3b62ba
Move HOLLOW_FRAME options to config_adv
8 years ago
67ca6c7bfe
Codestyle tweaks to ultralcd.cpp
8 years ago
8d9fcd8e6f
Merge pull request #5495 from AnHardt/autoadjusting_display-updates
...
Adaptive screen updates for all kinds of displays
8 years ago
77a360912d
Merge pull request #5491 from yhfudev/devel-rcbugfix-language-headers
...
UTF-8 language header files
8 years ago
d0e24e0876
Adaptive screen updates for all kinds of displays
...
The target here is to update the screens of graphical and char base
displays as fast as possible, without draining the planner buffer too much.
For that measure the time it takes to draw and transfer one
(partial) screen to the display. Build a max. value from that.
Because ther can be large differences, depending on how much the display
updates are interrupted, the max value is decreased by one ms/s. This way
it can shrink again.
On the other side we keep track on how much time it takes to empty the
planner buffer.
Now we draw the next (partial) display update only then, when we do not
drain the planner buffer to much. We draw only when the time in the
buffer is two times larger than a update takes, or the buffer is empty anyway.
When we have begun to draw a screen we do not wait until the next 100ms
time slot comes. We draw the next partial screen as fast as possible, but
give the system a chance to refill the buffers a bit.
When we see, during drawing a screen, the screen contend has changed,
we stop the current draw and begin to draw the new content from the top.
8 years ago
2dbd38ce16
tag the utf-8 strings
8 years ago
94ffb58da7
Prevent retract un-hop at wrong height
8 years ago
0772c8e55f
Merge pull request #5487 from thinkyhead/rc_easier_move_axis
...
Rearrange Move Menu, Fix up Delta Calibration
8 years ago
b2c8de856b
Merge pull request #5478 from AnHardt/stepspermm
...
Replace ftostr62sign with ftostr62rj
8 years ago
1fd8185d37
Merge pull request #5492 from thinkyhead/rc_fix_language_es
...
Fix multiple definitions of message macros in the language-es.h
8 years ago
1cdffdede7
fix multiple definitions of message macros in the language-es.h
8 years ago
b67f8cb499
Merge pull request #5490 from jbrazio/update-bqhp2
...
Update the bq Hephestos 2 example configuration
8 years ago
93b2833347
Move Menu: Select axis first, resolution after
8 years ago
48aa0f6475
Merge pull request #5475 from AnHardt/utf-mapper-tr
...
utf8-mapper for Turkish
8 years ago
b9ee0d7bd3
Merge pull request #5488 from thinkyhead/rc_fade_compiler_warn
...
Patch fade_factor compiler warning
8 years ago
641e0936d4
Patch up Delta Calibration Menu
8 years ago
b4dbf4d18a
Non-reentrant "Moving..." screen to safely wait in LCD
8 years ago
7b625e0048
Patch fade_factor compiler warning
8 years ago
6fa8fd15e2
Add negative temperatures for Thermistor 1
...
Changes from #5485 by @AndKe
8 years ago
2b5d424394
Use handle_reprapworld_keypad for keypad handling
8 years ago
887ed73c9b
Expose delta_clip_start_height for use by others
8 years ago
3f75edb1d6
Updated bq Hephestos 2 example configuration
8 years ago
b796e7031d
Update Aragonese translation
8 years ago
cd2b74e88d
Replace ftostr62sign with ftostr62rj
...
`ftostr62sign()` is used only when displaing/editing
Steps/mm. A sign is not needed - the value is always positive.
Because the number part is long there is no't much place for the values name.
With this PR the is one more char for the name possible.
8 years ago
795541f87e
utf8-mapper for Turkish
...
The non utf8 version of turkish is a bit unhandy.
Delete `language_tr.h`
Rename `language_tr_utf.h` to `language_tr.h`
Provide a propper utf8-mapper for Turkish and use it.
8 years ago
7c71bb2900
Merge pull request #5471 from thinkyhead/rc_planner_report_m503
...
Patch to show E factors in M503
8 years ago
39401b7472
Patch to show E factors in M503
8 years ago
6b50230022
Merge pull request #5447 from thinkyhead/rc_update_dutch
...
Dutch cleanup, ordering, placeholders
8 years ago
2c97c11731
Merge pull request #5454 from thinkyhead/rc_fix_delta_g29
...
Fix G29 starting height on DELTA
8 years ago
8239c45b30
Merge pull request #5448 from thinkyhead/rc_eeprom_bump
...
EEPROM: Prolong life. Better support for `DISTINCT_E_FACTORS`.
8 years ago
21ed43df5f
New Dutch terms
8 years ago
4bc6536f54
Move to safe zone on DELTA if using do_blocking_move_to*
8 years ago
6f389158d7
Compile less code with EEPROM off
8 years ago
f2301a2a04
Add e-stepper count to EEPROM (for planner vars)
8 years ago
53c9fca0f6
Only write to EEPROM when a byte changes
8 years ago
13eebd11cf
volatile_block_buffer_runtime_us
...
`block_buffer_runtime_us` is mangled in the planner and in the stepper-ISR.
So it needs to be volatile and interrupt protected.
8 years ago
8383f35b40
Merge pull request #5445 from thinkyhead/rc_reduce_jerk_code
...
Slightly shrink jerk and advance code
8 years ago
40453c1b9a
Update french translation (LIGHTS str)
8 years ago
fc2fc828b3
Prettify LIN_ADVANCE code with the positive condition
8 years ago
1929502e15
Add const to some variables
8 years ago
2da4d22520
Pretty up ADVANCE code
8 years ago
af024e1d7c
Pretty up coast / reverse jerk code
8 years ago
3f3b5c86d8
Slightly shrink code for jerk-based reduction of safe_speed
8 years ago
87fe20b5f5
Simplify long_move()
...
We are not really interested in, if there are blocks.
All information we need is in `block_buffer_runtime_us`.
8 years ago
574d9c7d3d
Merge pull request #5432 from Kaibob2/patch-2
...
Update language_de.h
8 years ago
f089279263
Merge pull request #5431 from esenapaj/Suppress-warnings,-etc
...
Suppress warnings, etc
8 years ago
d92ccb230c
Merge pull request #5438 from AnHardt/patch-long_move
...
Patch long_move()
8 years ago
706b240251
Patch long_move()
...
While the last move in the planner_buffer is running
it's duration is already subtracted from block_buffer_runtime_us.
8 years ago
a298a58684
Remove redundant "E"
8 years ago
390a6d976a
Update language_de.h
...
#define MSG_ENDSTOP_ABORT doesn't fit in Display
See https://github.com/MarlinFirmware/Marlin/issues/5401#issuecomment-265714487
8 years ago
e9393c3634
Suppress warnings, etc
...
・Suppress warnings
・Remove unused variable "did_update"
8 years ago
da6a094424
Sanity-check inverting and pullups for Z probe and Z endstop
...
`Z_MIN_ENDSTOP_INVERTING` must match `Z_MIN_PROBE_ENDSTOP_INVERTING`
when using `Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN`.
This is easy to overlook.
8 years ago
3fb43c11fc
Fix compile error with LCD_I2C_VIKI
8 years ago
aa241c63b3
Include M205 note in configurations
8 years ago
c8a95ec514
Merge pull request #5413 from MagoKimbra/rc_fix_mesh
...
Fix Mesh without Fade Height
8 years ago
35ad9626f1
Merge pull request #5410 from thinkyhead/rc_polish_update
...
Update Polish language, reduce filament change messages
8 years ago
01e5d46ea7
Patch some planner compile errors
8 years ago
5383212a28
Fix Mesh without Fade Height
8 years ago
dbe1dc1452
Merge pull request #5406 from Rigid3D/RCBugFix
...
Turkish Translation Update
8 years ago
4783a59249
Remove filament-change empty lines from languages
8 years ago
1705099c3e
Save space by not defining unused filament change message lines
8 years ago
9b1f4b514b
Update Polish language
...
Translation of messages in English to Polish.
8 years ago
84f7e1de04
Updates to Croatian language
8 years ago
08cdaaf19b
README and Version for 1.1.0-RCBugFix
...
Sync with RC8
8 years ago
f4663cb677
Update language_tr_utf8.h
8 years ago
b4fd115d4e
Update language_tr.h
8 years ago
83c5026db1
Ignore homing button when SD printing
...
As suggested in #5404 by @android444
8 years ago
312caef472
Merge pull request #5398 from thinkyhead/rc_croatian_cleanup
...
Fix Croatian spacing, extra #endif
8 years ago
46b65773ea
Fix Croatian spacing, extra #endif
8 years ago
3f2faac9d1
Merge pull request #5388 from thinkyhead/rc_subdivide_bilinear
...
Subdivide Bilinear Grid with Catmull Rom Splines
8 years ago
b5b5edd9ad
Merge pull request #5394 from thinkyhead/rc_drop_board_99
...
Remove mystery-board 99
8 years ago
c48901f355
Remove mystery-board 99
8 years ago
d7b948610a
Experimental bilinear subdivision option
8 years ago
6253b765aa
Merge pull request #5389 from thinkyhead/distribute_screen_updates
...
Distribute GLCD screen updates in time
8 years ago
b203901143
Merge pull request #5393 from AnHardt/Fix-auto_report_temperatures
...
Fix auto_report_temperatures()
8 years ago
59a27ed27d
Fix auto_report_temperatures()
...
The `auto_report_temperatures` needs a linefeed to be recognized by Repetier Host.
8 years ago
a6fbd4a5d8
Distribute GLCD screen updates in time
...
Currently we draw and send the screens for a graphical LCD all at once.
We draw in two or four parts but draw them directly behind each other.
For the tested status screen this takes 59-62ms in a single block.
During this time nothing else (except the interrupts) can be done.
When printing a sequence of very short moves the buffer drains - sometimes until it's empty.
This PR splits the screen update into parts.
Currently we have 10 time slots. During the first one the complete screen is drawn. (60,0,0,0,0,0,0,0,0,0,0)
Here i introduce pauses for doing other things. (30,30,0,0,0,0,0,0) or (15,15,15,15,0,0,0,0,0,0)
Drawing in consecutive time slots prevents from lagging too much. Even with a 4 stripe display all the drawing is done after 400ms.
Previous experiments with a even better distribution of the time slots like
(30,0,0,0,0,30,0,0,0,0) and (15,0,15,0,15,0,15,0,0,0) did not feel good when using the menu, because of too much lag.
Because of the previous PRs to speed up the display updates and especially reducing the difference between drawing 2 or 4 stripes,
it now makes sense for the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER to go from 2 to 4 stripes. This costs about 1-2ms per complete
screen update, but is payed back by having partial updates lasting only the half time and two additional brakes. Also ~256 byte of
framebuffer are saved in RAM.
13:45:59.213 : echo: #:17 >:13 s:30; #:16 >:13 s:29; S#:33 S>:26 S:59
13:46:00.213 : echo: #:16 >:14 s:30; #:17 >:13 s:30; S#:33 S>:27 S:60
13:46:01.215 : echo: #:17 >:13 s:30; #:16 >:13 s:29; S#:33 S>:26 S:59
13:46:02.215 : echo: #:16 >:13 s:29; #:16 >:14 s:30; S#:32 S>:27 S:59
13:46:03.214 : echo: #:17 >:13 s:30; #:17 >:13 s:30; S#:34 S>:26 S:60
13:46:04.214 : echo: #:16 >:13 s:29; #:16 >:14 s:30; S#:32 S>:27 S:59
13:46:05.212 : echo: #:16 >:14 s:30; #:17 >:13 s:30; S#:33 S>:27 S:60
13:46:06.212 : echo: #:17 >:13 s:30; #:16 >:13 s:29; S#:33 S>:26 S:59
03:30:36.779 : echo: #:8 >:7 s:15; #:10 >:7 s:17; #:8 >:6 s:14; #:8 >:7 s:15; S#:34 S>:27 S:61
03:30:37.778 : echo: #:8 >:6 s:14; #:10 >:7 s:17; #:9 >:7 s:16; #:8 >:6 s:14; S#:35 S>:26 S:61
03:30:38.778 : echo: #:8 >:6 s:14; #:11 >:7 s:18; #:8 >:6 s:14; #:8 >:7 s:15; S#:35 S>:26 S:61
03:30:39.777 : echo: #:8 >:6 s:14; #:10 >:7 s:17; #:8 >:8 s:16; #:8 >:6 s:14; S#:34 S>:27 S:61
03:30:40.780 : echo: #:8 >:6 s:14; #:11 >:7 s:18; #:8 >:6 s:14; #:8 >:6 s:14; S#:35 S>:25 S:60
03:30:41.780 : echo: #:9 >:6 s:15; #:10 >:7 s:17; #:8 >:6 s:14; #:9 >:6 s:15; S#:36 S>:25 S:61
03:30:42.779 : echo: #:8 >:6 s:14; #:10 >:8 s:18; #:8 >:6 s:14; #:8 >:6 s:14; S#:34 S>:26 S:60
03:30:43.778 : echo: #:9 >:6 s:15; #:10 >:7 s:17; #:8 >:7 s:15; #:9 >:6 s:15; S#:36 S>:26 S:62
#: draw a stripe
>: transfer a stripe
s: sum of of draw and transfer for one stripe
S#: sum of draws for a complete screen
S>: sum of transfers for a complete screen
S: time to draw and transfer a complete screen
8 years ago
f882355994
Merge pull request #5318 from Sebastianv650/Account_for_LCD_improvements
...
Account for LCD improvements in ENSURE_SMOOTH_MOVES
8 years ago
20e834461d
Merge pull request #5385 from thinkyhead/rc_ftostr4sign_decimal
...
Show decimal for small numbers in ftostr4sign
8 years ago
b6b100c471
Merge pull request #5371 from thinkyhead/rc_extruders_can_differ
...
Allow distinct factors for multiple extruders
8 years ago
449d9cbf60
Add placeholders for Polish translatable strings
8 years ago
643dc4b64e
Update language_pl.h
...
Fixed translations
8 years ago
0974b75fb6
Merge pull request #5386 from thinkyhead/rc_galician_update
...
Galician language update.
8 years ago
2b9115330d
Galician language update.
8 years ago
1f3e2440bc
Merge pull request #5175 from thinkyhead/rc_dualx_homing
...
Unpark when using Z_SAFE_HOMING with Dual X
8 years ago
d5bf1684fe
Implement as optional feature LCD_DECIMAL_SMALL_XY
...
And reduce the function size to simplify
8 years ago
bfb8d3b53e
Show more decimals in Display, if possible
...
_123, -123, _-12, __-1 plus 1234, 12.3, -1.2
8 years ago
1e30d1da47
Simplify itostr4sign
...
- This function becomes obsolete if ftostr4sign is re-written.
8 years ago
82a187acae
Merge pull request #5359 from AnHardt/update-de
...
Add missing translations to lang-de
8 years ago
4bafdf4b66
Support DISTINCT_E_FACTORS in LCD Motion Menu
8 years ago
3391c785c6
Support for distinct E factors
8 years ago
0dfe95eaba
Adjust formatting in Planner
8 years ago
09587f7c0d
Fix rows error in DOGM
8 years ago
c47e07d129
Fix Dual X software endstops
8 years ago
4217e9653e
Adjust park code in tool_change
8 years ago
b20405db31
Only DXC_AUTO_PARK_MODE should auto-move in tool_change
8 years ago
ca24af7d5d
Dual X with home_z_safely is not parked
8 years ago
0e15b4f434
Dual X set_axis_is_at_home can use x_home_pos for both
8 years ago
54109dfaec
Reduce code size for Dual X un-park
8 years ago
fe96f74db1
Use const arguments in Dual X helper functions
8 years ago
41278c1e8b
Apply LOGICAL_POSITION to home positions on Dual X
8 years ago
053fb55af6
Fix modes ordering in prepare_move_to_destination_dualx
8 years ago
ee50928eee
Make LOGICAL and RAW position macros ternary-compatible
8 years ago
56dd15c0ad
Use SET_INPUT for PS_ON_PIN in kill
8 years ago
200cf3e9f9
Merge pull request #5381 from thinkyhead/rc_fix_fade_factor
...
Properly apply fade_factor to MBL
8 years ago
84ff78c1e3
Pass the fade factor to mbl.get_z
8 years ago
85c2b96685
Apply const to MBL class methods
8 years ago
c06161b773
Use apply_leveling, not MBL directly
8 years ago
818f8b93d3
Merge pull request #5378 from thinkyhead/rc_duration_rj
...
Better alignment of elapsed print time
8 years ago
9d88a61d52
Better alignment of elapsed print time
8 years ago
0b53d78046
Tweak editable items for debugging
8 years ago
fccc97de6d
Save PROGMEM with string changes
...
Unlike RAM-based strings, PROGMEM strings aren’t consolidated by the
compiler.
8 years ago
e7fc353f08
Add missing translations to lang-de
8 years ago
3f2cb376e0
Add placeholders for Bulgarian translation
8 years ago
b22d37ba52
Merge pull request #5364 from thinkyhead/rc_croatian_update
...
Update Croatian to include missing strings
8 years ago
b796a687ca
Update Croatian to include missing strings
...
Added all missing strings according to English
8 years ago
255ed80164
Fix hotend offset report in M503
8 years ago
c66f3ed34b
Update Czech
8 years ago
cbf208ea1f
Merge pull request #5348 from Kaibob2/patch-1
...
Update language_de.h
8 years ago
a2660cf688
Merge pull request #5347 from tnw513/fix-italian
...
Added missing translations
8 years ago
27dd5acc22
Fix set_led_color for BLINKM
...
Follow-up to #5330
8 years ago
8530c32309
Update language_de.h
...
Grammar corrections
8 years ago
f1d5ffa211
Added missing translations
8 years ago
b0361ebe4f
Merge pull request #5343 from thinkyhead/rc_invert_case_light
...
Allow case light pin to be active low
8 years ago
f60b4f8659
Allow case light pin to be active low
8 years ago
3f4c02e42f
Merge pull request #5259 from Sebastianv650/Allow_UART-ISR_inside_Stepper
...
Allow UART ISRs inside the stepper ISR
8 years ago
d07229f185
Fix redraw in SD Card menus
8 years ago
47b4b21308
Merge pull request #5331 from esenapaj/Fix-for-the-PR-#5072
...
Fix for the PR #5072 (Add predefined AUTO_FAN_PINs to pins files), etc
8 years ago
8d14420331
Fix compile without ENABLE_LEVELING_FADE_HEIGHT
8 years ago
415294801f
Merge pull request #5330 from thinkyhead/rc_rgb_led
...
Support for an RGB LED using 3 pins
8 years ago
0909cf3d46
Adjust spacing
8 years ago
8e9e9c17b0
Follow-up the PR #5323 (Adding ukrainian language support)
...
・Update forgotten Configuration_adv.h of Felix\DUAL and K8400\Dual-head
8 years ago
d92ce8849b
Fix for the PR #5072 (Add predefined AUTO_FAN_PINs to pins files), etc
...
・Make descriptions the same as others
8 years ago
e00b380489
Merge pull request #5323 from akaJes/lang-ua
...
Adding ukrainian language support
8 years ago
65c50e062e
Support for an RGB LED using 3 pins
8 years ago
3047f3c85c
Suppress warning
8 years ago
f674246397
extend Configurations files
8 years ago
c90191faaf
adding ukrainian laguage support
8 years ago
912704a0d8
Enable ISRs inside temperature ISR
...
to capture chars at UART at 250000 baud.
8 years ago
f62f4006af
Account for LCD improvements in ENSURE_SMOOTH_MOVES
...
.. and give the hint to try lower values if possible.
8 years ago
092e949b58
Merge pull request #5169 from thinkyhead/rc_core_inverted
...
Support for COREYX, COREZX, COREZY
8 years ago
e9e4208ff1
Merge pull request #5274 from Sebastianv650/improve_smooth_moves
...
Improvement for ENSURE_SMOOTH_MOVES
8 years ago
c7935bb0d2
Merge pull request #5299 from thinkyhead/rc_bed_correction_fade
...
Add a fade factor for mesh leveling
8 years ago
a69b1ee691
Merge pull request #5313 from thinkyhead/rc_fix_menu_actions
...
Keep drawing menu unless screen changes
8 years ago
32ee3acf86
Merge pull request #5315 from thinkyhead/rc_fixup_material_menus
...
Refine material heatup menu items
8 years ago
c70a06daf1
lcd_save_previous_menu => lcd_save_previous_screen
8 years ago
13ea43cc8d
Only exit menu handler when the screen changes
8 years ago
f45b6a7762
Merge pull request #5314 from thinkyhead/case_light_menu_fix
...
Fix and optimize case-light code
8 years ago
59fafb93b2
Merge pull request #5304 from AnHardt/pixel-shifting
...
MENU_HOLLOW_FRAME for the menu screens
8 years ago
0951d385ce
Don't set heater temperature above its maximum
8 years ago
c9193e856d
Limit preheat parameters based on all nozzles
8 years ago
bb4529f7d2
PLA / ABS => Material 1 / 2
8 years ago
61437d988a
Fix and optimize case-light code
8 years ago
7a9fa78822
MENU_HOLLOW_FRAME for the menu screens
...
MENU_HOLLOW_FRAME for the menu screens and
some pixel shifting to optimize the look with tall fonts. (cn)
8 years ago
24ca1a6289
Not more then 4 stripes for u8g-devices
...
To optimise speed.
Costs well invested 128Byte of RAM.
8 years ago
aee71c543e
Minor formatting in language.h
8 years ago
05d8d189f6
Adjust spacing in utf_mapper.h
8 years ago
5460a529da
Add option DOGM_SPI_DELAY_US
8 years ago
71842b6a17
Apply const to LCD arguments and locals
8 years ago
b1abd7edef
Optimize graphical display with selective rendering
8 years ago
b91fab2d7d
Fix USE_BIG_EDIT_FONT
8 years ago
4cd73e183d
Hide hidden files and folders
8 years ago
f6f77d34a1
Add a fade factor for mesh leveling
8 years ago
75fdcc14b7
Activate font and mapper for el-gr
8 years ago
a0004e7cd3
Change font decent to -1 for tt and gr
...
For speeding up font drawing unify font decent.
Tr and Gr have ben the only fonts with a font decent of -2.
Sorry for some, a bit compressd, but hopefully still readeble symbols.
8 years ago
307f263f89
Merge pull request #5292 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
8 years ago
7070143042
Update Japanese translation
...
・Add new translation
8 years ago
ef97645002
Follow-up the PR #5255 (Case light menu (3rd attempt))
8 years ago
2a9b3376a9
Merge pull request #5289 from thinkyhead/rc_which_menu_actions
...
Drop "static" keyword in ultralcd.cpp function declarations
8 years ago
b97dafe4b8
Drop "static" keyword in ultralcd.cpp function declarations
8 years ago
2e966f8e5b
Patch Capabilities Report for "PROGRESS"
8 years ago
f60321d3e3
Merge pull request #5284 from thinkyhead/rc_turkish_update
...
Turkish update (squashed)
8 years ago
a26668b10c
Add UTF8 Turkish Translation
8 years ago
61aa796307
Added Human Readable Comments
8 years ago
6fb9c6fe07
Follow-up for #5167 Turkish Language
...
Add check for Turkish Font before setting better font for graphic displays
8 years ago
d891324830
Merge pull request #5258 from mosh1/mbl_speed_fix
...
Fix z feedrate value when doing mesh bed leveling. probe feedrate use…
8 years ago
7f8133a51f
Merge pull request #5255 from Kaibob2/CaseLightMenu
...
Case light menu (3rd attempt)
8 years ago
e9b42f4f47
Update language_de.h
8 years ago
0c341f0c50
Added Menu entry for Case light
8 years ago
3bc2273ac9
Comment M540
8 years ago
14b74181f5
Merge pull request #5179 from thinkyhead/rc_TMC2130
...
TMC2130 "Silent StepStick" support
8 years ago
bb2114a060
Merge pull request #5264 from thinkyhead/rc_delta_safe_zone
...
Add an option for delta to home to the top
8 years ago
38466b1d2f
Merge pull request #5271 from esenapaj/Fix-for-the-PR-#5267
...
Fix for thePR #5267 (Introduce a +1234.56 format for over 999 steps/mm)
8 years ago
9b96a4a53b
Merge pull request #5246 from thinkyhead/rc_some_cleanup
...
Minor stepper cleanup
8 years ago
8190483eeb
Improvement for ENSURE_SMOOTH_MOVES
...
Instead of waiting for a single long block, compare the complete block
buffer runtime for the long_move() check.
8 years ago
da67037550
Fix for thePR #5267 (Introduce a +1234.56 format for over 999 steps/mm)
...
・Fix memory leak
8 years ago
0f891e848b
Merge pull request #5268 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
8 years ago
190a04c467
Update Japanese translation
...
・Change translation for 16 width LCD
8 years ago
7b836a4000
Introduce a +1234.56 format for over 999 steps/mm
8 years ago
3e0376b45e
Reorder M114 and M119 gcode cases
8 years ago
644fac5d34
Reduce all stepper_indirection init code with macros
8 years ago
4e4f37b6c2
Code formatting for TMC and L6470 config options
8 years ago
127e21ae00
Extend M122 for all steppers
8 years ago
bf5f5f44cc
Make TMC2130 init code auto-configure
...
Simply apply enabled settings instead of requiring users to edit
stepper_indirection.cpp
8 years ago
d67c1d825f
Add TMC2130 support
8 years ago
11effeee2c
Add an option for delta to home to the top
8 years ago
50059690e0
Allow UART ISRs inside the stepper ISR
...
If the stepper ISR takes too long, chars are lost which leads to serial
communication errors like "Line number not +1" or "Wrong checksum". In
worst case, the printer can even do crazy moves.
With this changes, UART interrupts are handled inside the stepper ISR.
This way, no chars should be lost.
8 years ago
29b174bfb9
Fix z feedrate value when doing mesh bed leveling. probe feedrate uses XY_PROBE_SPEED
8 years ago
88b38eafd8
Endstop interrupt refinement
...
At the start of a move, check if the endstops are already triggered.
The 'change' interrupts will not see a change if already triggered.
8 years ago
79c8591192
Merge pull request #5253 from thinkyhead/rc_smooth_move_ex-lax
...
Ensure smooth print moves even with LCD enabled
8 years ago
0215cacb30
Merge pull request #5247 from esenapaj/Re-follow-the-PR-#4634
...
Re-follow the PR #4634 (Set language display charset in language.h)
8 years ago
2cc32d85a3
Adjust ENSURE_SMOOTH_MOVES coding style
8 years ago
072541f286
Update ENSURE_SMOOTH_MOVES in all configs
8 years ago
de89dc9f04
Ensure smooth print moves even with LCD enabled
...
lcd_update can take so much time that the block buffer gets drained if
there are only short segments. This leads to jerky printer movements for
example in circles and a bad print quality.
This change implements a simple check: Only if the block currently
executed is long enough, run lcd_update.
This also means the printer will not show actual values on the LCD nor
will it respond to buttons pressed. A option that keeps the menu
accessible is also available.
Aditionaly, slow down if a block would be so fast that adding a new
block to the buffer would take more time. In this case, the buffer would
drain until it's empty in worst case.
8 years ago
87b6b19256
Patch CASE_LIGHT typo
8 years ago
0be6167f14
Merge pull request #5250 from CONSULitAS/RCBugFix_K8200_backinsync_2016-11-18
...
K8200: Example configuration back in sync
8 years ago
eb714ee873
Move dummy thermistor opts, fix redundant sensor comment
8 years ago
7a99c6ce4f
Reformat temp sensor listing
8 years ago
181cdb3cfe
Move GCode list above include lines
8 years ago
25d0c167bd
More detailed static_assert messages
8 years ago
eb120e518c
Followup to new endstop interrupts feature
...
- Fix typos, verbiage
- Fix naming of `setup_endstop_interrupts`
- Some formatting, indentation, spacing
8 years ago
832fe284b4
Merge pull request #5184 from AnHardt/endstop_interrupts
...
Introduce endstop interrupts
8 years ago
cbae44df64
K8200: Example configuration back in sync
...
Configuration.h: back in sync, new features configured
Configuration_adv.h: back in sync, new features configured
README.md: text updated
8 years ago
5db3738fe7
Re-follow the PR #4634 (Set language display charset in language.h)
8 years ago
6eb6f12c64
Patch up some language formatting
8 years ago
8cffa60cc5
Update to Danish language 10/11-2016
8 years ago
98600e1433
Minor stepper cleanup
8 years ago
d08867986e
Add autotemp capabilities to M104
...
This allows M104 to pass the F and B parameters to enable autotemp as well
8 years ago
c11b2bb777
Bugfix LIN_ADV
...
Advance has nothing todo with Z_AXIS, strange copy&paste error?
8 years ago
ee0765e872
Merge pull request #5233 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
8 years ago
2330619da0
Merge pull request #5191 from petrzjunior/const
...
Replace const bool with #define for consistency
8 years ago
b278b7a395
Update Japanese translation
...
Only adjust spacing
8 years ago
d7ce5d271b
Replace const bool with #define for consistency
8 years ago
d63230d73e
Merge pull request #5192 from Kaibob2/patch-7
...
Printer Stats / Completed prints line doesn't fit in display (when german)
8 years ago
548b45026d
Merge pull request #5214 from Sebastianv650/RCBugFix_planner_opt
...
Save some cycle inside the planner
8 years ago
5d23e52d75
Merge pull request #5228 from thinkyhead/rc_keep_last_mix
...
Fix DIRECT_MIXING_IN_G1 to preserve the previous mix
8 years ago
db47aa983d
Merge pull request #5226 from mtowara/RCBugFix
...
bump -std in Makefile to c++11
8 years ago
99b0c1fe56
Fix DIRECT_MIXING_IN_G1 to preserve the previous mix
8 years ago
23a675f621
reduce binary size of .hex
...
still a few bytes bigger than with arduino but nothing major
8 years ago
5b6e2cecf5
bump c/c++ standard to gnu11
...
needed for constexpr
8 years ago
410657b050
Fix G30 with limits, print correct probe XY
8 years ago
f3eee02596
Introduce endstop interrupts
...
If ENDSTOP_INTERRUPTS_FEATURE is enabled this tries to set up interrupt routines
for all used endstop pins. If this worked without errors, `endstops.update()` is called
only if one of the endstops changed its state.
The new interrupt routines do not really check the endstops and react upon them. All what they
do, is to set a flag if it makes sense to call the endstop test we are used to.
This can be used on:
* ARM (DUE) based boards - all pins can raise interrupts,
* RAMPS - all 6 endstop pins plus some other on EXT-2 can raise interrupts,
* RAMPS based boards - as long the designers did not change the pins for the endstops or at least left enough,
* all boards, if there are enough pins that can raise interrupts, and you are willing/able to swap with pins dedicated to other purpose.
8 years ago
e3ffb58fbd
Save some cycle inside the planner
...
planner.h:
fan speed is used to set integer variables, so no need for long.
Basicaly a byte should be enough for all the fan things, as it's 0-255?
planner.cpp:
Save some float multiplications.
We could squeeze out even more by defining feedrate_percentage,
saved_feedrate_percentage and flow_percentage as float instead of int.
Everytime they are used in the time-critical planner, they are casted to
float and multiplied by 0.01. Not done jet, as they are used in LCD menu
functions I don't know well enough.
8 years ago
665b7f3893
Merge pull request #5212 from thinkyhead/rc_mixing_faster
...
Store mix factors as reciprocals and multiply
8 years ago
60cc9342a4
Merge pull request #5188 from thinkyhead/rc_extended_host_support
...
Extended host support: M155 Auto temp report, M115 capabilities
8 years ago
f663220e87
Store Mix factors as reciprocals and multiply
8 years ago
ea3c08d249
Merge pull request #5186 from esenapaj/Follow-up-the-PR-#5167-etc
...
Follow up the PR #5167 (Add Turkish Language) again, etc
8 years ago
c488378532
Merge pull request #5205 from Sebastianv650/RCBugFix_stepperpatch
...
Remove useless line from stepper ISR
8 years ago
8bdf303da0
Update pins_MEGATRONICS_3.h
8 years ago
3890366c83
Update pins.h
8 years ago
c0d45ca7f2
Update boards.h
8 years ago
cdc18f8c22
Remove useless line from stepper ISR
...
The flag is already set inside planner.get_current_block(). Doing it
twice isn't making it better..
8 years ago
8e8b4398f3
Printer Stats / Completed prints line doesn't fit in display (when german)
8 years ago
b31a07e261
Stateful M355 with separate P parameter
8 years ago
3c9a838651
Extended capabilities report in M115
8 years ago
68b866b5dd
Add M155 - Auto-report temperature with interval
8 years ago
68b46fb2c9
Allow send to i2c address 0 (broadcast)
8 years ago
75bfde9945
M155=>M260, M156=>M261
8 years ago
2ae72b0491
Follow up the PR #5167 (Add Turkish Language) again, etc
...
・Update forgotten K8400\Dual-head\Configuration.h
・Adjust spacing
8 years ago
06f2282f82
Merge pull request #5176 from thinkyhead/rc_filchange_feedback
...
Give instant feedback for filament change
8 years ago
dcfd7c69e8
Merge pull request #5163 from nzinov/RCBugFix
...
Improve G30 probing command - add optional arguments
8 years ago
e765eebfb0
Patch spacing in bilinear grid report
8 years ago
7780052fb3
Give instant feedback for filament change
8 years ago
24e3f7abe7
Update Turkish translation
...
・Add new translation
8 years ago
be48792e9c
Follow up the PR #5167 (Add Turkish Language), etc
...
・Remove all the #ifndef
・Follow the PR #4603 (Strip never-translated strings from language
files)
・Follow the PR #4634 (Set language display charset in language.h)
・Follow the PR #4936 (Put max_jerk vars in array, clean up jerk code)
・Adjust spacing
8 years ago
1864b282c5
Implement reversed CORE options
8 years ago
e3c8318504
Add reversed CORE options
8 years ago
2327764980
Add Turkish Language
8 years ago
dea00bbcf1
improve G30 probing
...
Add optional parameters
X, Y for probe point
S sets stowing on and off
8 years ago
00662b8635
Minor babystep cleanup patches
8 years ago
cad792e702
Reduce code for invariant lcd_detected
8 years ago
b23d255491
Move macros above Stepper::babystep
8 years ago
cc57d46158
Fix set_position for CoreYZ
8 years ago
0269347682
Merge pull request #5141 from thinkyhead/rc_old_slowdown_what
...
OLD_SLOWDOWN does nothing, so remove it
8 years ago
e92e2b2446
Merge pull request #5144 from Sebastianv650/RCBugFix_LIN_ADV_wipe
...
Account for wipe moves
8 years ago
176aeafc19
Don't define bilinear_line_to_destination on kinematic setups
8 years ago
d448500643
Account for moves with negative E movements
...
Added a rule so that LIN_ADVANCE isn't used for moves with negative E movements (de_float will be negative in this cases).
I also added a more detailed comment to make it more clear what the if statement does.
8 years ago
236853df22
Corrections to bilinear_line_to_destination
...
- Allow more than 9x9 probe points
- Account for the probe starting position
8 years ago
0115e495fe
Fix up Dual X switch blocks
8 years ago
2495ab7af2
Make dual_x_carriage_mode an enumeration
8 years ago
d6c36f5bb9
Fix Z raise with DXC_AUTO_PARK_MODE
8 years ago
0c79553fc5
Cast int to AxisEnum for some accessors
8 years ago
adbf1f7dca
Add M355 to the GCodes list.
8 years ago
63efc10599
Merge pull request #5134 from thinkyhead/rc_bilinear_split_lines
...
Split cartesian moves on grid boundaries with bilinear ABL
8 years ago
12167bc8f3
OLD_SLOWDOWN does nothing, so remove it
8 years ago
c8c1a28f6f
Follow-up the PR #5089 (Centralize click-handling in the LCD loop)
...
bool feedback is no longer used
8 years ago
c3a105186d
Follow-up the PR #5133 (M355 Case light)
...
・Add CASE_LIGHT_PIN into pinsDebug.h
8 years ago
ee5b8d6dc8
Split moves on grid boundaries with bilinear ABL on cartesian
8 years ago
66744a6076
Merge pull request #5133 from thinkyhead/rc_M355_case_light
...
M355 Case light
8 years ago
955d14acb0
Patch photo pin code style
8 years ago
ab3f966f5f
Case light G-code M355
...
implemented G-Code M355 into Marlin
8 years ago
8b44413498
Merge pull request #5124 from Sebastianv650/RCBugFix_LIN_ADV-Patch
...
BugFix for incorrect E-speed calculation
8 years ago
f418e82b15
Remove redundant definition of EN_C
8 years ago
f9bea7968f
BugFix for incorrect E-speed calculation
...
The extrusion speed was wrong due to a not high enough precision of
esteps to XY steps, therefore now the target float values are used to
calculate the ratio between XY movement and extrusion speed.
The e_speed_multiplier8 was replaced by an absolute multiplier called
abs_adv_steps_multiplier8, therefore one multiplication and bitshift can
be saved inside the stepper ISR. Due to this, also extruder_advance_k is
better suited inside the planner and not the stepper files any more.
8 years ago
c20b4098be
2 bug fixes & some minor changes
...
see detailed description in PR #5118
8 years ago
fa6bf12697
Merge pull request #5118 from thinkyhead/rc_expanded_M43
...
Enhancements to M43 pins debugging
8 years ago
3a107e280d
Developer note in pins_MIGHTYBOARD_REVE.h
8 years ago
85e307dcd8
No FAN0_PIN
8 years ago
ff3a8ca0d1
Use NUM_DIGITAL_PINS instead of custom DIO_COUNT
8 years ago
04a1fac029
Some cleanup to M43
8 years ago
24f6612551
Reduce and optimize endstop_monitor code
8 years ago
b4444e91ae
Reduce code and build size of PWM_details
8 years ago
dbe414ef03
Squash redundant code in PWM_status
8 years ago
af26d22741
Clean up some spacing and semantics
8 years ago
81397d7a9a
EXTRUDER_x_AUTO_FAN name change to Ex_AUTO_FAN
...
I stumbled across a name change that'll be used a lot so I'm updateing
the name list.
8 years ago
c7f1f0dae6
Add endstop monitor & make pins report pretty
8 years ago
d567b426d5
Merge pull request #4894 from thinkyhead/rc_mightyboard_rev_e
...
Mightyboard Revision E preliminary support
8 years ago
43df9ace4e
Merge pull request #5110 from thinkyhead/rc_z2_min_allowed
...
Support Z2 min in M119 report
8 years ago
23f05f8be7
Use bit-length types in block_t
8 years ago
8dc7807d85
Add support for CoreYZ to planner.buffer_line
8 years ago
1cf878fdb1
Calculate dm and e-steps earlier in planner
8 years ago
75dbb71dd7
Replace block.busy with a block.flag bit
8 years ago
c7f22f688f
buffer_line can calculate while it's waiting
8 years ago
f3720f4e81
const arguments to test_dual_z_endstops
8 years ago
8cebd2a7db
Arrange Z2 min before Z2 max
8 years ago
accabf088a
Add support for Z2 min endstop to M119
8 years ago
396434a445
Fix compiler warning in M145
8 years ago
8e787304c9
const float ref args in planner.h
8 years ago
07bfc45df8
Adjust spacing in gcode_M149
8 years ago
1a2310c494
Make LCD preheat vars an array to reduce code size
8 years ago
1226ae1912
Some cleanup in ultralcd.h
8 years ago
50ee749082
Centralize click-handling in the LCD loop
8 years ago
47ad97c35e
Merge pull request #5109 from thinkyhead/rc_eeprom_M218_tool_offset
...
Save hotend_offset array (M218) in EEPROM
8 years ago
bff6bbdb12
Indentation in configuration_store.cpp
8 years ago
97115d56f9
Print error for M500 with disabled EEPROM
8 years ago
67ab54185b
Save hotend_offset array (M218) in EEPROM
8 years ago
dfcdbb437b
Fix Command M420
8 years ago
c34dbfb248
Merge pull request #5072 from thinkyhead/rc_preset_auto_fans
...
Add predefined AUTO_FAN_PINs to pins files
8 years ago
9a23f73765
Don't trigger endstops that are actually Z2 or probe
8 years ago
c07cc9e3f1
Revert changes made to z dual endstop test
...
#3631 broke z dual endstops. Solved by @Nocturnal42 in https://github.com/MarlinFirmware/Marlin/issues/5078#issuecomment-256572248
8 years ago
c4c53856a4
Merge pull request #5094 from esenapaj/Fix-for-the-PR-#5088
...
Fix for the PR #5088 (Handle M108 in M1 also with ULTIPANEL)
8 years ago
2e3110539b
Merge pull request #5095 from thinkyhead/rc_fix_bilinear_math
...
Fix bilinear grid constraints
8 years ago
d5a5042d23
Fix for the PR #5088 (Handle M108 in M1 also with ULTIPANEL)
8 years ago
9cbedab91b
Use DPM where possible
8 years ago
ad38d91692
Sanity check that auto fan pins can do PWM
8 years ago
95275eb9b3
Predefine auto fan pins in some pins files
8 years ago
3f94b15cef
Fix bilinear grid constraints
...
Followup to #5090
8 years ago
d439fb95f7
Sanity check for the renamed options
8 years ago
b6aa894893
Rename auto fan pins and add auto fan flags
8 years ago
ada935de87
Allow TEMP_STAT_LEDS with only one LED defined
8 years ago
4b056d8184
Fix warning in ultralcd.cpp
8 years ago
9dfd029911
Fix bug in fastio.h _GET_TIMER
8 years ago
8b1d90e281
Follow-up the PR #5087 (Fixed SERVO pins on Azteeg X3), etc
...
・Add header
・Adjust spacing
8 years ago
bfd3b3c604
Merge pull request #5087 from Fulg/azteeg-x3-pins
...
Fixed SERVO pins on Azteeg X3
8 years ago
208d720614
Merge pull request #5082 from Fulg/RCBugFix
...
Only issue MAXTEMP when heating
8 years ago
f0d673561f
Fix for bilinear grid outside bounds
8 years ago
24bcea6c02
Merge pull request #5088 from thinkyhead/rc_break_m1_fix
...
Handle M108 in M1 also with ULTIPANEL
8 years ago
1ba1ec0db9
Handle M108 in M1 also with ULTIPANEL
8 years ago
7ad33422e3
Clear dir_t size, not pointer size
8 years ago
1c716034ec
Fixed SERVO pins on Azteeg X3
8 years ago
2aa12d78dc
Only issue MAXTEMP when heating
8 years ago
3fcf915808
Fix uninitialized var in reset_acceleration_rates
8 years ago
14f824c3de
Merge pull request #5071 from esenapaj/Extend-measuring-range-of-thermocouple
...
Extend measuring range of thermocouple for MAX31855
8 years ago
1097a50694
Merge pull request #5070 from gcormier/rcbugfix
...
Fix #4995 - M48/G29 on CoreXY maybe others?
8 years ago
c397b9d60a
Planner acceleration bugfix and speedup v2
...
.) Use already existing inverse_millimeters instead of /
block->millimeters.
.) Prevent overflow during acceleration calculation by checking if float
is necessary. Idea modified from Sailfish.
.) Save two uint32_t or even float multiplications by checking if
step[AXIS] has steps and if max acceleration is lower than accel. If
not, there is no need to check this axis.
8 years ago
70e287ca8c
Extend measuring range of thermocouple for MAX31855
8 years ago
f0aed9dac7
Fix #4995 - M48/G29 on CoreXY maybe others?
8 years ago
e50992694f
Fix for the PR #5066 (Updated french translation)
...
MSG_INFO_PRINT_TIME is still being used
8 years ago
483082387c
Merge pull request #5022 from esenapaj/Fix-for-the-PR-#4553
...
Fix for the PR #4553 (Save bytes for custom chars (Hitachi LCD))
8 years ago
8b967a9ff0
Merge pull request #5058 from thinkyhead/rc_reverse_arrow_buttons
...
Apply encoder reverse options to keypad arrows
8 years ago
523c7eaa6c
Fix for the PR #4553 (Save bytes for custom chars (Hitachi LCD))
8 years ago
ca48a49fdb
Merge pull request #5065 from petrzjunior/transl
...
[LANGUAGE] Update Czech (BLTOUCH and DAC strings)
8 years ago
f0744fc815
Merge pull request #5066 from thinkyhead/rc_french_update
...
Updated french translation
8 years ago
88b7f6eb46
Updated french translation
8 years ago
3544c3632f
Merge pull request #5062 from thinkyhead/rc_warnings_fix
...
Warnings fixed redux
8 years ago
8323d78ed7
Translated BLTOUCH and DAC strings
8 years ago
e151f952a3
Apply encoder reverse options to keypad arrows
8 years ago
cfb47929ca
Merge pull request #5060 from thinkyhead/rc_fix_ugly_code
...
Reduce, clean up MINTEMP / MAXTEMP test code
8 years ago
dca50737f5
fixed warning: ISO C++ forbids compound-literals
8 years ago
0bd66807b2
fixed warning: extra ;
8 years ago
d35dc407a8
fixed warning: ISO C99 requires rest arguments to be used
8 years ago
c2b51af3ba
fixed warning: ISO C does not permit named variadic macros
8 years ago
0d3fc7dd89
Merge pull request #5059 from gcormier/fixbaby
...
Set defer delay back to false when exiting babystepping.
8 years ago
f888597197
Reduce, clean up code for mintemp/maxtemp tests
8 years ago
ad64723354
Move MAX_EXTRUDERS to pins.h
8 years ago
5f5a55a0de
Add a ZERO macro to clear arrays
8 years ago
0009725637
Set defer delay back to false when exiting babystepping.
8 years ago
627f9d5285
Merge pull request #5056 from thinkyhead/rc_lin_adv_opt
...
LIN_ADVANCE optimizations
8 years ago
0908329d96
Merge pull request #5057 from thinkyhead/rc_mbl_lcd_logical
...
Fix manual leveling coordinates
8 years ago
14e60f0d3b
Correct typo in configs
...
As pointed out by #5044
8 years ago
1165e83263
MBL coordinates are logical
8 years ago
dbfabb4c0a
Merge pull request #5043 from Kaibob2/patch-5
...
Correct grammar and translation in language_de.h
8 years ago
b19bba275f
No LCD timeout during babystepping
...
As requested in #5031
8 years ago
b9109b2875
Improve LIN_ADVANCE commentary (all configs)
8 years ago
9818d97587
Fix Z-hops during retract/prime lead to blobs
...
We don't want to have retract/prime movements done with LIN_ADVANCE, that's also true with simultaneously executed Z-hops.
8 years ago
599649e45d
Add formula for LIN_ADVANCE_K
...
With this formula, a start value for K for further fine-calibration can be calculated.
8 years ago
be7d245eff
Merge pull request #5008 from thinkyhead/test_endstop_hits
...
Save some PROGMEM in MBL G28
8 years ago
7c0e52256d
Merge pull request #5053 from thinkyhead/rc_fix_baud_config
...
Patch BAUDRATE line in configs
8 years ago
2783dcb4cc
Save some RAM in MBL's G29
8 years ago
4f5a8c05d5
Tweaks to endstops macros
8 years ago
083d41a2c2
Remove redundant estep rate code from LIN_ADVANCE
...
As noted by https://github.com/MarlinFirmware/Marlin/pull/4971#issuecomment-252503295
8 years ago
4f6bfabaad
Patch BAUDRATE line in configs
8 years ago
2bfedb74d5
Correct grammar and translation in language_de.h
...
Made Filament change Text sound like correct german.
8 years ago
1e1edeadd3
Fix for the commit dc2cb84 (Revert acceleration limiting to avoid overflow)
...
・Add forgotten '\'
8 years ago
dc2cb8454c
Revert acceleration limiting to avoid overflow
8 years ago
6ae5cf17a9
Merge pull request #5033 from esenapaj/Fix-freezing-with-MAX31855
...
Fix freezing and MINTEMP Error with MAX31855 thermocouple
8 years ago
f257c4bcae
Merge pull request #5036 from thinkyhead/rc_dac_code_deps
...
Fix DAC current code
8 years ago
b80cc0cbb5
Fix DAC current code
8 years ago
385bd8a4a3
Fix freezing and MINTEMP Error with MAX31855 thermocouple
8 years ago
ca7275a67a
Disable EXTRAPOLATE_FROM_EDGE by default
8 years ago
0921c7da84
Merge pull request #4997 from thinkyhead/rc_jerk_from_mk2
...
Adapt Jerk / Speed code from Prusa MK2
8 years ago
4d89652bc2
Apply minor optimizations to planner.cpp
8 years ago
1092319b19
Adapt speed/jerk code based on Prusa MK2 branch
8 years ago
37643fef63
Merge pull request #4972 from bgort/platformio-improvements
...
Move platformio directories out of source tree
8 years ago
8e1cc9332a
Replace block flag bools with flag bits
...
…and apply const to some method parameters
8 years ago
d41f2bdbd8
Merge pull request #4991 from thinkyhead/rc_max31855_fix
...
Patches for Stepper DAC and MAX31855
8 years ago
e7cf566fc5
Do kinematic segments with buffer_line_kinematic
...
This breaks the raw option, but in the future perhaps all planner moves
will be sent in raw form instead of logical.
8 years ago
a10e81dc2a
Minor cleanup of set_bed_leveling_enabled
8 years ago
029824bc49
Patch ADJUST_DELTA macro for SCARA
8 years ago
5ce5a9c822
Marlin: planner.h tweak
8 years ago
d963020532
Sort out some header dependencies
8 years ago
e17f9b8b99
DAC patches
...
As suggested by #4985
8 years ago
2cb5df8a56
Merge pull request #4984 from esenapaj/Small-fix-for-PR-#4980
...
Small fix for the PR #4980 (LIN_ADVANCE bug fix and optimization)
8 years ago
b6221df3f3
Merge pull request #4983 from MarlinFirmware/revert-4933-rc_drop_pid_func_range
...
Revert "Removal of PID functional range"
8 years ago
a07033a6c1
Merge pull request #4974 from esenapaj/Follow-up-the-PR-#4955
...
Fix and follow-up the PR #4955 (PINS_DEBUGGING and M43: Read pin states), etc
8 years ago
f8199b2cc1
Merge pull request #4982 from thinkyhead/rc_abl_bugfix
...
Fix planner with kinematics, delta ABL
8 years ago
f41c60d4a4
Follow-up the PR #4955 , etc
...
・More ANALOG NUMBERING to Analog Input
・Add comment header to all the section of all the pins files
・Sort sections as follows:
1. Some special definitions (USBCON, LARGE_FLASH, etc)
2. Servos
3. Limit Switches
4. Z Probe
5. Steppers
6. Temperature Sensors
7. Heaters / Fans
8. Misc. Functions
9. LCD / Controller
・Move MAX6675_SS into "Temperature Sensors" section
・Adjust spacing
8 years ago
00456b0cb3
Fix compilation errors
8 years ago
cfb5c24bc9
Small fix for the PR #4980 (LIN_ADVANCE bug fix and optimization)
...
・Fix a comment about timer
8 years ago
149b8d9e4b
Handle MAX31855 error conditions
8 years ago
f4ec265363
Fix a typo
8 years ago
4ec2d459e6
Fix mcp4728_setVref_all as followup to #4967
8 years ago
1e551c0688
Revert "Squashed - Removal of PID functional range"
8 years ago
4037df82b0
Merge pull request #4981 from esenapaj/Update-Japanese-language
...
Update Japanese translation, etc
8 years ago
e4e290d957
Make EXTRUDER_RUNOUT_PREVENT kinematic compatible
8 years ago
847429eff4
Make tool_change kinematic compatible
8 years ago
a4a7ca10ca
Make USE_DELTA_IK_INTERPOLATION compatible with ABL
8 years ago
c5cac486f5
Use a, b, c instead of lx, ly, lz
8 years ago
f8c2473a71
Improve planner kinematics, fix delta ABL
8 years ago
48761f2021
Patch delta endstop adjustment config
8 years ago
28d41b48e3
delta endstop adjustment configurable
8 years ago
ff6b23cb0f
Fix an issue with shifted LCD lines
8 years ago
e4d2662d81
Use some macros in M48
8 years ago
3752d9aca8
Fix timer comments
8 years ago
a448cedbc5
LIN_ADVANCE bug fix and optimization
...
.) long to int: Extruder stalls at 10kHz / 20kHz step limits with long.
.) Take the delta_adv_steps calculation out of the step_loops loop. Wasted calculation performance if done inside.
.) >> 2 replaced by 3: Is divide by 8. Reason: Timer 0 runs at 16/8=2MHz, Timer 1 at 16/64=0.25MHz. ==> 2/0.25=8.
8 years ago
b27080c1dd
Update Japanese translation
...
・Add new translation
8 years ago
0780146034
Move DAC section from inside of the changing filament section
8 years ago
9c0404eae4
Move platformio directories out of source tree
8 years ago
a1b50f1102
Cleanup of code style
8 years ago
13c9dcc600
Add LCD menu for DAC
8 years ago
00261cbfcb
Merge pull request #4933 from thinkyhead/rc_drop_pid_func_range
...
Squashed - Removal of PID functional range
8 years ago
ee01def16d
Merge pull request #4955 from thinkyhead/rc_debug_pins
...
PINS_DEBUGGING and M43: Read pin states
8 years ago
a0df34fd4c
Add PINS_DEBUGGING advanced config option
8 years ago
e21bab5243
PINS_DEBUGGING and M43 Read Pins
8 years ago
3c97fa6e29
Merge pull request #4963 from esenapaj/Fix-for-advance-algorithm
...
Move routine of direction signal of ADVANCE and LIN_ADVANCE from Stepper::isr() to Stepper::advance_isr()
8 years ago
48e63c4730
Comment some globals
8 years ago
9a6c66602f
Fix formatting of extrapolate debug output
8 years ago
cd77eb5c40
Clear grid for bilinear G29
8 years ago
53a0856f5c
Print Y as int in print_bed_level
8 years ago
f8df88f271
Move routine of direction signal of ADVANCE and LIN_ADVANCE from Stepper::isr() to Stepper::advance_isr()
8 years ago
357854a7ef
tweak variables;
8 years ago
48cf19151a
Improve M48 output; Add min, max, range, etc.
8 years ago
c63cb45268
Fix thermal runaway timeout
8 years ago
e6164d254d
Clean up GCode command short comments
8 years ago
47bd142b29
Should marlinAnalogInputToDigitalPin use analogInputToDigitalPin?
8 years ago
bd8520e61d
Label analog pins in a similar way
...
Some other pins formatting also
8 years ago
0c0deb5194
Common pin_is_protected function
8 years ago
49d77720d5
More support for 4th extruder or heater
8 years ago
46839c222a
Comment and clean up some vars
8 years ago
8910bb7c97
Fix buzzer conditional compile
8 years ago
de7e798e6f
Replace single-char S_ECHOs with S_CHAR
8 years ago
0e83f34174
Tweak debugging of probe_pt
8 years ago
cc02f6edf8
Merge pull request #4943 from esenapaj/Small-update-of-language_kana_h
...
Small update of language_kana.h
8 years ago
ca26011e3c
Merge pull request #4941 from MagoKimbra/rc_fix_M205
...
Add note for M205
8 years ago
9485aa8f13
Include negative Z probe offset in clearance move
8 years ago
5c1eb595e6
Fix for G2/G3 negative radius
...
As suggested in #4940
8 years ago
f09ae96f28
Small update of language_kana.h
8 years ago
7b37539fe7
Add note for M205
8 years ago
d5f598cd82
Tweak probe debug, add newline
8 years ago
c592ccb6f5
Patch max_jerk[Z] menu item
8 years ago
d80a79eb77
Use right-shift instead of / 2, why not?
8 years ago
02fe9cf558
Removal of functional range constraint
...
Also lined up the >> 1 and / 2 mentioned earlier in the unconstrained I term issue,
8 years ago
5f5d87cad3
Update Configuration.h
8 years ago
761593b74b
Cleanup some vars, use of min/max
8 years ago
d19cfcfc1d
max_jerk array, DEFAULT_XYJERK => DEFAULT_[XY]JERK
8 years ago
e7dc174f30
More detailed debugging of G28 delta
8 years ago
473f4a17a8
Merge pull request #4914 from Rerouter/PID-Unconstrained-Itemp
...
Pid unconstrained itemp
8 years ago
bad8899ebc
Merge pull request #4900 from thinkyhead/rc_g38_changes
...
Cleanup of G38.2 / G38.3
8 years ago
73ce3a61c7
Cleanup, comment zigzag
8 years ago
0d538f3db6
Add to all configurations
8 years ago
919fe3e4b8
Rename feature to G38_PROBE_TARGET
8 years ago
a2864ab7fe
Patched up, cleaned up
8 years ago
2911aa7ffa
code changes to implement G38 commands
...
1) modified 3 code files
Marlin.h
Marlin_main.cpp
endstops.cpp
2) modified config files so I could test on my machine
Testing was done on an AzteegX3pro based machine.
The probe was hooked to the Z_MIN endstop.
My controller doesn't have a dedicated Z_PROBE input so I couldn't test
that functionality.
Verified that a large file (without any G38 commands) executed the same
before and after the changes.
Verified that the head moves as expected when G38.2 and G38.3 commands
are issued. Single & multiple axis moves were tested along with + and -
directions.
Code was added to the main ISR. In normal operation only one extra IF
statement is evaluated. I didn't notice any performance degradation
because of the added code.
The G38 commands are expected to be issued manually by the operator
during machine setup. The G38 commands wait until the machine is idle
before proceeding. That way the other commands are minimally impacted
by the extra ISR overhead when a G38 command is in the queue.
The G38 commands are very similar to the G28 commands except 1) only the
Z_PROBE is used and movement can be in the + or - direction.
See issue 4677 for a discussion on adding G38 commands to Marlin.
Feature request: add ability to use G38.2 command (CNC)
MarlinFirmware/Marlin#4677
8 years ago
74d048e77e
Merge pull request #4927 from thinkyhead/rc_bltouch_noraise
...
Don't check Z_MAX on raise when the probe pwns the pin
8 years ago
4afa293289
Say "BLTOUCH" in machine info report
8 years ago
ed7d2694fc
Don't check Z_MAX on raise when the probe pwns the pin
8 years ago
LVD-AC