Sanity-check inverting and pullups for Z probe and Z endstop

`Z_MIN_ENDSTOP_INVERTING` must match `Z_MIN_PROBE_ENDSTOP_INVERTING`
when using `Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN`.
This is easy to overlook.

Marlin/Configuration.h

@@ -459,7 +459,7 @@
 #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
-#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.

Marlin/SanityCheck.h

@@ -454,6 +454,8 @@
       #error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires USE_ZMIN_PLUG to be enabled."
     #elif !HAS_Z_MIN
       #error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires the Z_MIN_PIN to be defined."
+    #elif ENABLED(Z_MIN_PROBE_ENDSTOP_INVERTING) != ENABLED(Z_MIN_ENDSTOP_INVERTING)
+      #error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires Z_MIN_ENDSTOP_INVERTING to match Z_MIN_PROBE_ENDSTOP_INVERTING."
     #endif
   #elif ENABLED(Z_MIN_PROBE_ENDSTOP)
     #if !HAS_Z_MIN_PROBE_PIN

Marlin/example_configurations/Cartesio/Configuration.h

@@ -459,7 +459,7 @@
 #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
-#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe.
 
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.

Marlin/example_configurations/Felix/Configuration.h

@@ -441,7 +441,7 @@
 #define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
-#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.

Marlin/example_configurations/Felix/DUAL/Configuration.h

@@ -441,7 +441,7 @@
 #define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
-#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.

Marlin/example_configurations/Hephestos/Configuration.h

@@ -451,7 +451,7 @@
 #define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
-#define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the probe.
 
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.

Marlin/example_configurations/Hephestos_2/Configuration.h

@@ -453,7 +453,7 @@
 #define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
-#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.

Marlin/example_configurations/K8200/Configuration.h

@@ -489,7 +489,7 @@
 #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
-#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.

Marlin/example_configurations/K8400/Configuration.h

@@ -459,7 +459,7 @@
 #define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
-#define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the probe.
 
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.

Marlin/example_configurations/K8400/Dual-head/Configuration.h

@@ -459,7 +459,7 @@
 #define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
-#define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the probe.
 
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -459,7 +459,7 @@
 #define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
-#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe.
 
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.

Marlin/example_configurations/RigidBot/Configuration.h

@@ -456,7 +456,7 @@
 #define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
-#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe.
 
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.

Marlin/example_configurations/SCARA/Configuration.h

@@ -474,7 +474,7 @@
 #define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
-#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe.
 
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.

Marlin/example_configurations/TAZ4/Configuration.h

@@ -480,7 +480,7 @@
 #define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
-#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe.
 
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.

Marlin/example_configurations/WITBOX/Configuration.h

@@ -451,7 +451,7 @@
 #define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
-#define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the probe.
 
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.

Marlin/example_configurations/adafruit/ST7565/Configuration.h

@@ -459,7 +459,7 @@
 #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
-#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.

Marlin/example_configurations/delta/biv2.5/Configuration.h

@@ -506,7 +506,7 @@
 #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
-#define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING false  // set to true to invert the logic of the probe.
 
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.

Marlin/example_configurations/delta/generic/Configuration.h

@@ -506,7 +506,7 @@
 #define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
-#define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the probe.
 
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -506,7 +506,7 @@
 #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
-#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -493,7 +493,7 @@
 #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
-#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -504,7 +504,7 @@
 #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
-#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.

Marlin/example_configurations/makibox/Configuration.h

@@ -462,7 +462,7 @@
 #define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
-#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -449,7 +449,7 @@
 #define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
-#define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the probe.
 
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.