Scott Lahteine
8 years ago
committed by
GitHub
commit
832fe284b4
@ -0,0 +1,211 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* Endstop interrupts
|
||||
* Without endstop interrups the stepper-ISR must always test all endstops when interested in their states (endstops.update()).
|
||||
* Most time the test will result in finding out nothing has changed.
|
||||
* With endstop interrupts endstops.update() is called only when we know that at least one endstop has changed its state.
|
||||
*
|
||||
* This can work only if all __used__ endstop pins can provide ether an 'external interrupt' or a 'pin change interrupt'.
|
||||
* You can find out about pins issuing interrupts by running 'pin_interrupt_test.ino' (Marlin\buildroot\share\pin_interrupt_test\pin_interrupt_test.ino)
|
||||
*/
|
||||
|
||||
#ifndef _ENDSTOP_INTERRUPTS_H_
|
||||
#define _ENDSTOP_INTERRUPTS_H_
|
||||
|
||||
/**
|
||||
* Patch for pins_arduino.h (...\Arduino\hardware\arduino\avr\variants\mega\pins_arduino.h)
|
||||
*
|
||||
* These macros for the Arduino MEGA do not include the two connected pins on Port J (D13, D14).
|
||||
* So we extend them here because this are the normal pins for Y_MIN and Y_MAX on RAMPS.
|
||||
* There are more PCI enabled processor pins on Port J, but they are not connected to Arduino MEGA.
|
||||
*/
|
||||
#if defined(ARDUINO_AVR_MEGA2560) || defined(ARDUINO_AVR_MEGA)
|
||||
#undef digitalPinToPCICR
|
||||
#define digitalPinToPCICR(p) ( (((p) >= 10) && ((p) <= 15)) || \
|
||||
(((p) >= 50) && ((p) <= 53)) || \
|
||||
(((p) >= 62) && ((p) <= 69)) ? (&PCICR) : ((uint8_t *)0) )
|
||||
#undef digitalPinToPCICRbit
|
||||
#define digitalPinToPCICRbit(p) ( (((p) >= 10) && ((p) <= 13)) || (((p) >= 50) && ((p) <= 53)) ? 0 : \
|
||||
( (((p) >= 14) && ((p) <= 15)) ? 1 : \
|
||||
( (((p) >= 62) && ((p) <= 69)) ? 2 : \
|
||||
0 ) ) )
|
||||
#undef digitalPinToPCMSK
|
||||
#define digitalPinToPCMSK(p) ( (((p) >= 10) && ((p) <= 13)) || (((p) >= 50) && ((p) <= 53)) ? (&PCMSK0) : \
|
||||
( (((p) >= 14) && ((p) <= 15)) ? (&PCMSK1) : \
|
||||
( (((p) >= 62) && ((p) <= 69)) ? (&PCMSK2) : \
|
||||
((uint8_t *)0) ) ) )
|
||||
#undef digitalPinToPCMSKbit
|
||||
#define digitalPinToPCMSKbit(p) ( (((p) >= 10) && ((p) <= 13)) ? ((p) - 6) : \
|
||||
( ((p) == 14) ? 2 : \
|
||||
( ((p) == 15) ? 1 : \
|
||||
( ((p) == 50) ? 3 : \
|
||||
( ((p) == 51) ? 2 : \
|
||||
( ((p) == 52) ? 1 : \
|
||||
( ((p) == 53) ? 0 : \
|
||||
( (((p) >= 62) && ((p) <= 69)) ? ((p) - 62) : \
|
||||
0 ) ) ) ) ) ) ) )
|
||||
#endif
|
||||
|
||||
volatile uint8_t e_hit = 0; // Different from 0 when the endstops shall be tested in detail.
|
||||
// Must be reset to 0 by the test function when the tests are finished.
|
||||
|
||||
// Install Pin change interrupt for a pin, can be called multiple times
|
||||
void pciSetup(byte pin) {
|
||||
*digitalPinToPCMSK(pin) |= bit (digitalPinToPCMSKbit(pin)); // enable pin
|
||||
PCIFR |= bit (digitalPinToPCICRbit(pin)); // clear any outstanding interrupt
|
||||
PCICR |= bit (digitalPinToPCICRbit(pin)); // enable interrupt for the group
|
||||
}
|
||||
|
||||
// This is what is really done inside the interrupts.
|
||||
FORCE_INLINE void endstop_ISR_worker( void ) {
|
||||
e_hit = 2; // Because the detection of a e-stop hit has a 1 step debouncer it has to be called at least twice.
|
||||
}
|
||||
|
||||
// Use one Routine to handle each group
|
||||
// One ISR for all EXT-Interrupts
|
||||
void endstop_ISR(void) {
|
||||
endstop_ISR_worker();
|
||||
}
|
||||
|
||||
#ifdef PCINT0_vect
|
||||
ISR(PCINT0_vect) { // handle pin change interrupt
|
||||
endstop_ISR_worker();
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef PCINT1_vect
|
||||
ISR(PCINT1_vect) { // handle pin change interrupt
|
||||
endstop_ISR_worker();
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef PCINT2_vect
|
||||
ISR(PCINT2_vect) { // handle pin change interrupt
|
||||
endstop_ISR_worker();
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef PCINT3_vect
|
||||
ISR(PCINT3_vect) { // handle pin change interrupt
|
||||
endstop_ISR_worker();
|
||||
}
|
||||
#endif
|
||||
|
||||
void setup_enstop_interrupts( void ) {
|
||||
|
||||
#if HAS_X_MAX
|
||||
#if (digitalPinToInterrupt(X_MAX_PIN) != NOT_AN_INTERRUPT) // if pin has an external interrupt
|
||||
attachInterrupt(digitalPinToInterrupt(X_MAX_PIN), endstop_ISR, CHANGE); // assign it
|
||||
#else
|
||||
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
|
||||
static_assert(digitalPinToPCICR(X_MAX_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR"); // if pin has no pin change interrupt - error
|
||||
pciSetup(X_MAX_PIN); // assign it
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if HAS_X_MIN
|
||||
#if (digitalPinToInterrupt(X_MIN_PIN) != NOT_AN_INTERRUPT)
|
||||
attachInterrupt(digitalPinToInterrupt(X_MIN_PIN), endstop_ISR, CHANGE);
|
||||
#else
|
||||
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
|
||||
static_assert(digitalPinToPCICR(X_MIN_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
|
||||
pciSetup(X_MIN_PIN);
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if HAS_Y_MAX
|
||||
#if (digitalPinToInterrupt(Y_MAX_PIN) != NOT_AN_INTERRUPT)
|
||||
attachInterrupt(digitalPinToInterrupt(Y_MAX_PIN), endstop_ISR, CHANGE);
|
||||
#else
|
||||
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
|
||||
static_assert(digitalPinToPCICR(Y_MAX_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
|
||||
pciSetup(Y_MAX_PIN);
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if HAS_Y_MIN
|
||||
#if (digitalPinToInterrupt(Y_MIN_PIN) != NOT_AN_INTERRUPT)
|
||||
attachInterrupt(digitalPinToInterrupt(Y_MIN_PIN), endstop_ISR, CHANGE);
|
||||
#else
|
||||
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
|
||||
static_assert(digitalPinToPCICR(Y_MIN_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
|
||||
pciSetup(Y_MIN_PIN);
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if HAS_Z_MAX
|
||||
#if (digitalPinToInterrupt(Z_MAX_PIN) != NOT_AN_INTERRUPT)
|
||||
attachInterrupt(digitalPinToInterrupt(Z_MAX_PIN), endstop_ISR, CHANGE);
|
||||
#else
|
||||
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
|
||||
static_assert(digitalPinToPCICR(Z_MAX_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
|
||||
pciSetup(Z_MAX_PIN);
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if HAS_Z_MIN
|
||||
#if (digitalPinToInterrupt(Z_MIN_PIN) != NOT_AN_INTERRUPT)
|
||||
attachInterrupt(digitalPinToInterrupt(Z_MIN_PIN), endstop_ISR, CHANGE);
|
||||
#else
|
||||
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
|
||||
static_assert(digitalPinToPCICR(Z_MIN_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
|
||||
pciSetup(Z_MIN_PIN);
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if HAS_Z2_MAX
|
||||
#if (digitalPinToInterrupt(Z2_MAX_PIN) != NOT_AN_INTERRUPT)
|
||||
attachInterrupt(digitalPinToInterrupt(Z2_MAX_PIN), endstop_ISR, CHANGE);
|
||||
#else
|
||||
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
|
||||
static_assert(digitalPinToPCICR(Z2_MAX_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
|
||||
pciSetup(Z2_MAX_PIN);
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if HAS_Z2_MIN
|
||||
#if (digitalPinToInterrupt(Z2_MIN_PIN) != NOT_AN_INTERRUPT)
|
||||
attachInterrupt(digitalPinToInterrupt(Z2_MIN_PIN), endstop_ISR, CHANGE);
|
||||
#else
|
||||
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
|
||||
static_assert(digitalPinToPCICR(Z2_MIN_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
|
||||
pciSetup(Z2_MIN_PIN);
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if HAS_Z_MIN_PROBE_PIN
|
||||
#if (digitalPinToInterrupt(Z_MIN_PROBE_PIN) != NOT_AN_INTERRUPT)
|
||||
attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE);
|
||||
#else
|
||||
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
|
||||
static_assert(digitalPinToPCICR(Z_MIN_PROBE_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
|
||||
pciSetup(Z_MIN_PROBE_PIN);
|
||||
#endif
|
||||
#endif
|
||||
|
||||
// When we arive here without error each pin has ether a EXT-interrupt or a PCI.
|
||||
}
|
||||
|
||||
|
||||
#endif //_ENDSTOP_INTERRUPTS_H_
|
||||
@ -0,0 +1,32 @@
|
||||
// Search pins uasable for endstop-interupts
|
||||
// Compile with the same settings you'd use with Marlin.
|
||||
|
||||
#if defined(ARDUINO_AVR_MEGA2560) || defined(ARDUINO_AVR_MEGA)
|
||||
#undef digitalPinToPCICR
|
||||
#define digitalPinToPCICR(p) ( (((p) >= 10) && ((p) <= 15)) || \
|
||||
(((p) >= 50) && ((p) <= 53)) || \
|
||||
(((p) >= 62) && ((p) <= 69)) ? (&PCICR) : ((uint8_t *)0) )
|
||||
#endif
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
Serial.println("PINs causing interrups are:");
|
||||
for(int i=2; i<NUM_DIGITAL_PINS; i++){
|
||||
if( digitalPinToPCICR(i) != NULL || (int)digitalPinToInterrupt(i) != -1 ) {
|
||||
for (int j= 0; j<NUM_ANALOG_INPUTS; j++){
|
||||
if(analogInputToDigitalPin(j) == i) {
|
||||
Serial.print("A");
|
||||
Serial.print(j);
|
||||
Serial.print(" = ");
|
||||
}
|
||||
}
|
||||
Serial.print("D");
|
||||
Serial.println(i);
|
||||
}
|
||||
}
|
||||
Serial.println("Arduino pin numbering!");
|
||||
}
|
||||
|
||||
void loop() {
|
||||
// put your main code here, to run repeatedly:
|
||||
}
|
||||
Loading…
Reference in New Issue