b7a66742dd
tested
...
add sort alpha section to other LPC1768 boards
7 years ago
bbc2e66634
Fix AZSMZ MINI pins for new LPC1768 pinmapping
7 years ago
31e96935f7
Fix EXTRA_FAN_SPEED
...
Addressing #8158
7 years ago
c94dce6b32
Merge pull request #8113 from thinkyhead/bf2_fixup_sd_reprint
...
[2.0.x] Cleanup after SD Print Again, whitespace, tabs
7 years ago
ce1c9c0808
Tweak QUICK_HOME description
7 years ago
12458cefc4
Remove 5s timer hack. Encoder pos is saved on print start!
7 years ago
9a4cf11835
Remove return_to_status_ms hack, just use defer...
7 years ago
8949c8c0a5
Move SD_REPRINT_LAST_SELECTED_FILE to ultralcd.cpp
7 years ago
817175613a
Merge pull request #8157 from thinkyhead/bf2_anet_10_servo
...
[2.0.x] Define a default SERVO0_PIN for Anet 1.0
7 years ago
723f2a77f6
Implement support for Dual X and Y endstops
7 years ago
e04425281d
Add Dual Steppers / Endstops to configs
7 years ago
edff2c917b
Cleanup for DIGIPOTS settings
7 years ago
3e8754a38a
Add/correct time units on planner vars / M205 B
7 years ago
b2a48f1a04
Provide a SERVO0_PIN for non-standard LCD
7 years ago
b232f39341
AVR: Hidden option to use 8s watchdog
7 years ago
9d4cfd2013
Merge pull request #8142 from thinkyhead/bf2_fix_m303
...
[2.0.x] Fix M303 thermal protection
7 years ago
eae0aea1e0
Fix M303 thermal protection
7 years ago
a1a4fc277e
(2.0.x) serious bug G33 ( #8136 )
...
* (2.0.x) serious bug G33
* Revert config changes
This reverts commit 74b5a98223b7b7fb970d05b8541f4a079c3cfe56.
7 years ago
325233b454
Fix automatic stepper assignment for X/Y/Z dual stepper drivers ( #8130 )
7 years ago
50b4f9cbf7
LPC1768 Pin Mapping and M43 cleanup ( #8119 )
...
* LPC1768 M43 cleanup
* Update pinmapping.h to #define pins
7 years ago
6b1d1a818b
Revert default BABYSTEP_MULTIPLICATOR to 1
7 years ago
ba8dc678f5
Arduino Due XON/XOFF implementation
...
Alos includes emergency parser and configurable TX/RX buffers for Arduino Due.
7 years ago
8d9c3cc2b7
Add a module for Due SRAM-based Interrupt Vector Table
...
This is the ONLY way to be able to override ISRs stolen by the Arduino Runtime, such as Serial or USB device interrupts. This feature is needed so Arduino modules can be replaced and enhanced.
7 years ago
c9bbef6380
Cosmetic fix for HAL_AVR/MarlinSerial.cpp
...
Instead of using const char, it is better to use uint8_t
7 years ago
dcfc2503c2
G33 Autotune calibration update #10
7 years ago
b338cafc65
Merge pull request #8111 from thinkyhead/bf2_fwretract_fix_oct26
...
[2.0.x] Improved Firmware Retraction logic
7 years ago
ada90f7335
Clean up trailing spaces
7 years ago
7fad26549b
Concise SD_REPRINT_LAST_SELECTED_FILE description
7 years ago
33f379fe88
Add some Polish language
...
Thanks @SCiunczyk
7 years ago
daeff5a11a
Tweak neopixel self-test
7 years ago
0ceec1f166
Fix leveling_active_at_z warning
7 years ago
eb02f8c719
Improve FWRETRACT logic, add common sense
7 years ago
bd78ca0ee3
Add M290 Babystepping
7 years ago
ce5f0ec85a
Bring STM32 example config up to date
7 years ago
46e9eae159
Tweak to M100 config comment
7 years ago
c45514f811
Merge pull request #8094 from thinkyhead/bf2_neopixel_led_parity
...
[2.0.x] Bring NEOPIXEL_LED into parity with 1.1.x
7 years ago
229a27a1c7
save FLASH by using reduced font for some languages
7 years ago
3f5f39576b
Reprint option for last SD Memory card file ( #8106 )
...
* Re-Print of same SD Memory Card file with single click
* Re-Print of same SD Memory Card file with single click
* This is the bugfix-v2.0.0 version of https://github.com/MarlinFirmware/Marlin/pull/8104
7 years ago
9e699811d2
Make LPC1768 pinmapping not specific to Re-ARM ( #8063 )
...
* Merging early because of build failures. See #8105
* Make LPC1768 pinmapping not specific to Re-ARM
* Add HAL_PIN_TYPE and LPC1768 pin features
* M43 Updates
* Move pin map into pinsDebug_LPC1768.h
* Incorporate comments and M226
* Fix persistent store compilation issues
* Update pin features
* Update MKS SBASE pins
* Use native LPC1768 pin numbers in M42, M43, and M226
7 years ago
3ac581eac9
Neopixel changes for parity with 1.1.x
7 years ago
7b3098bbd5
Add AZSMZ Mini ( #8005 )
...
* Add AZSMZ Mini
* Remove tabs, adjust spacing
* Renumber boards to group by family
* Patch up spacing
* Tweak
7 years ago
e00ed10c4c
GT2560 config MKS_MINI_12864 => SDSUPPORT
7 years ago
10a5e4d80f
Merge pull request #8078 from thinkyhead/bf2_mks_mini_lcd
...
[2.0.x] Add MKS MINI 12864 support to GT2560
7 years ago
ee9b8bf0f1
Add MKS MINI 12864 support to GT2560
7 years ago
f65fc7ffab
Merge pull request #8044 from thinkyhead/bf2_mesh_consolidate
...
[2.0.x] Simplify mesh bounds config
7 years ago
070cd34fe8
Merge pull request #8077 from thinkyhead/bf2_MKS_BASE_followup
...
Clean up HAL trailing spaces, MKS SBASE pins
7 years ago
7f55d82fd1
Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h
7 years ago
90a14b4f5b
Clean up HAL trailing spaces, MKS SBASE pins
7 years ago
51fafccc16
[2.0.x] Enable hardware serial ports on LPC1768 ( #8004 )
...
* Enable hardware serial ports on LPC1768
* Fix compilation errors with other HALs
* FIx order of includes in LPC1768 HAL main.cpp
* Add support for RX_BUFFER_SIZE and TX_BUFFER_SIZE options in Configuration_adv.h
7 years ago
580b6e9089
Apply physical limits to mesh bounds
7 years ago
4e2baeb3e1
Update indentation, file-wrapping for Marlin 2.0.x
7 years ago
60af705e6d
Relocate SPI.h to the HAL folder
7 years ago
46aae4c6e7
Merge pull request #8074 from thinkyhead/bf2_verbiage_like_8061
...
Fix some config verbiage
7 years ago
3356d5a72d
Merge pull request #8072 from thinkyhead/bf2_fix_M600
...
[2.0.x] Fix position sync in M600 pause/resume
7 years ago
5f87324536
Fix some config verbiage
7 years ago
272f9f65dc
Fix some typos
7 years ago
8181220bfd
Fix position sync in M600 pause/resume
7 years ago
6296ab2173
Add GFX overlay to UBL mesh edit ( #8038 )
...
* Add GFX overlay to UBL mesh edit
Fixed misplaced HAS_TEMP_BED in dogm_bitmaps.h
rename _lcd_babystep_zoffset_overlay to _lcd_zoffset_overlay_gfx and move it out of BABYSTEP_ZPROBE_OFFSET to we can use it for over things. Add this function into UBL mesh edit screen.
update all Configuration.h to add ENABLE_MESH_EDIT_GFX_OVERLAY
* Add Sanity to UBL insanity
Need to check for DOGLCD otherwise error out.
7 years ago
72156a2029
change to better (more clear) names ( #8050 )
...
set_destination_to_current() changed to set_destination_from_current()
set_current_to_destination() changed to set_current_from_destination()
7 years ago
0cb423b5b3
Apply consistency for other configs
7 years ago
8c78f8f790
Add Makeboard MINI for Micromake C1
7 years ago
1fbb307aaf
Merge pull request #8021 from thinkyhead/bf2_scroll_longnames
...
[2.0.x] Add SCROLL_LONG_FILENAMES to reveal longer filenames
7 years ago
3d2b2eb1ca
Prevent SDCARD_SORT_ALPHA from exploding
7 years ago
783ddf9691
Add SCROLL_LONG_FILENAMES option
7 years ago
5439358281
Basic UBL operations working on 32-bit platforms ( #8024 )
...
* 32-bit work for UBL
* Update FT i3-2020 reference file
7 years ago
9e5cbf0198
BQ should set this in its config, and does
7 years ago
348e5e3109
Simplify Cartesian probing boundaries
...
Followup to #8012
7 years ago
3986a84f77
boolval revisited ( #8016 )
7 years ago
572cf0ec95
UBL able to generate mesh and save and load it on 32-bit platforms ( #8015 )
...
* Get UBL Mesh Generation, Mesh Save & Mesh Load working with 32-Bit platforms
* clean up read_data() and write_data() for non-LPC1768 HAL's
* Get read_data() and write_data() return codes consistent
All HAL's read_data() and write_data() return false if they succeed.
* Get read_data() and write_data() return codes to be consistent
Make read_data() and write_data() return true if an error happens.
* Say UBL is now checked out on machine types in default Configuration.h file.
7 years ago
67cc29cd3c
Update UBL mesh boundaries to accomidate beds centered at 0, 0 ( #8012 )
7 years ago
6cb26c98c8
Fix Baby Stepping on 32-Bit platforms ( #8001 )
...
Also, Max7219 debug code was used for this effort. It has been
improved and hardened.
7 years ago
3b7b0492f8
Merge pull request #7993 from jeffyl/bugfix-2.0.x
...
[2.0.x] Proper support for AZSMZ 12864 LCD on SmartRAMPS
7 years ago
26531f2715
Add lcd to all sample configs
7 years ago
ce48403a0b
Add EXTRA_FAN_SPEED feature
...
Based on #7883 by @studiodyne
7 years ago
eeb4611606
Add proper support for the AZSMZ 12864 LCD on a SMART RAMPS
7 years ago
c46189e429
Fix UBL+Delta segmented feedrate
...
Based on #7948
7 years ago
5c4f3e0107
Add LCD_SET_PROGRESS_MANUALLY
7 years ago
014a83fe09
Merge pull request #7984 from thinkyhead/bf2_micromake_c1
...
[2.0.x] Micromake C1 Configurations, Unaccented French
7 years ago
bc7df0188e
Add Micromake C1 configurations
7 years ago
34a261416f
Add unaccented French language
7 years ago
e587f0893c
Define AVR_ATmega2560_FAMILY_PLUS_70 in Conditionals
7 years ago
fd128b3c93
Fix some AVR HAL code style
7 years ago
799360c576
Enhance Teensy/RAMPS pins files
7 years ago
d3e5a22a5d
Add MIN_SOFTWARE_ENDSTOP_[XYZ] to example configs
7 years ago
b206f70693
Split the software endstop capability by axis.
7 years ago
ec69e97bda
Merge pull request #7974 from jeffyl/bugfix-2.0.x
...
Fix include path for VIKI
7 years ago
91e28edda6
[2.0.x] Add new board: MKS Sbase ( #7945 )
...
* Add files via upload
* Add files via upload
* Add files via upload
* Checked LCD / edited / revised pins_MKS_BASE.h
As requested :)
* Delete Configuration_adv.h
* Delete Configuration.h
* Deleted /Marlin/Marlin/src/config/examples/MksSbase/*.* and moved them to /Marlin/Marlin/src/config/examples/Mks/Sbase/*.*
* Add files via upload
7 years ago
3c8a3a02ba
Fix include path for VIKI
7 years ago
4586acad8c
Merge pull request #7959 from alexxy/bugfix-2.0.x
...
Python isnt always python2
7 years ago
497f86453e
Merge pull request #7964 from gallynero/patch-2
...
fix 'axis_unhomed_error' not defined error
7 years ago
c0dddd4233
Tweaks to tool_change, GcodeSuite::T()
7 years ago
ca66574062
ADC sensor fix inspired by 'Evgen2' on Twitter
7 years ago
1344ca4b2f
UBL no longer needs ubl_state
7 years ago
8dd08425fd
Improve LCD leveling edits
7 years ago
3e3911fb81
Use planner.leveling_active for all leveling systems
7 years ago
32c607ffe2
Ensure fade factor is recalculated if fade height changes
7 years ago
ca1e47375c
Move fade_scaling_factor_for_z to Planner
7 years ago
9a930ebec2
Make leveling_is_active a macro
7 years ago
58abc66c1d
Tweak bed leveling conditionals
7 years ago
1adb5a6a48
Remove obsolete UBL z_offset
7 years ago
3619a4cbea
fix 'axis_unhomed_error' not defined error
...
Fix 'axis_unhomed_error' not defined error when pause with unhomed status
7 years ago
12d212d1b4
Python isnt always python2
...
So now this script is compatible with both python versions 2 and 3
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
7 years ago
cc01a36363
Merge pull request #7947 from thinkyhead/bf2_more_READMEs
...
[2.0.x] Add a README.h file for Arduino IDE users
7 years ago
4764710b11
Add a README.h file for Arduino IDE users
7 years ago
4e3ee845b9
config_adv ( #7941 )
...
get rid of twi.h
move to board files
7 years ago
0e260c6c1d
Get FolgerTech i3-2020 working again with 32-bit platforms ( #7944 )
...
Setup FolgerTech i3-2020 Configuration files as a reference platform for
32-Bit work.
Also fix MAX7219 debug lights on 32-bit platforms.
7 years ago
26bfae58d4
MPC4451 I2C support
7 years ago
1f5c432e29
Merge pull request #7920 from thinkyhead/bf2_neopixel_full
...
[2.0.x] Move FILAMENT_RUNOUT_SENSOR to a feature
7 years ago
732e87e83c
Merge pull request #7892 from GMagician/Serial-double-echo-fix
...
[2.0.x] Serial double echo fix
7 years ago
f8e8fcb978
Move FILAMENT_RUNOUT_SENSOR to a feature
7 years ago
a11e6a1022
Different NEOPIXEL types
...
Same as #7728 but for 2.0.x,
Lot of cleanup and remove references in whole code to other "LED files" than leds.h. Now will be much easier to add next drivers/libraries. e.g. FastLED. But bad news, currently FastLED is suporting only RGB devices (no RGBW)
7 years ago
b30b55307c
Merge pull request #7909 from thinkyhead/bf2_goodbye_legacy_advance
...
[2.0.x] Remove legacy ADVANCE feature
7 years ago
1d04197f2f
Merge pull request #7916 from thinkyhead/bf2_probeless_ubl
...
[2.0.x] Allow UBL G29 and G26 to build without a probe
7 years ago
9b0ee53b12
Use segmented moves when moving axis from LCD
7 years ago
442669d23c
Allow UBL to build without a probe
7 years ago
20ebe218c8
Tweaks to VIKI lcd support
7 years ago
09fa34a9e1
Modernize configs
7 years ago
560d366b80
Move VIKI SCK/MOSI pins fix to Conditionals_POST.h
7 years ago
e9bcb9d048
Add 4 new LCD displays
7 years ago
03f4891fb9
Remove legacy ADVANCE feature
7 years ago
546f02c6f4
[2.0.x] Addressing #7896
...
Compiler error, added char c variable
7 years ago
eb96d37da0
Serial double echo fix
...
Fix double character sent when TX buffer size is 0 on mega2560
7 years ago
deeea98d22
LCD filename already concatenated
7 years ago
a058638d11
Merge pull request #7875 from thinkyhead/bf2_fill_eeprom_dat_ff
...
[2.0.x] Update LPC persistent store to initialize eeprom.dat with FF
7 years ago
ae1a18d0a1
LCD filename already concatentated
7 years ago
12aa1b999a
Fix display issue with SD_SORT_ALPHA cached names
7 years ago
9d0e4ea3d5
[2.0.x] Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled ( #7879 )
...
* Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled
If HOME_AFTER_DEACTIVATE, there is no need to warn on LCD since printer will home prior to starting print. Saves 60 bytes PROGMEM on AVR with U8g panel.
* Reduce lines used
* Reduce lines used
7 years ago
8315a8a716
Apply fixes for DUE
...
Alternative to #7882 . If F_CPU is greater than 1000 it can be evenly divided by 8. Over 10000, 16; over 100000, 32; over 1 million, 64; etc.
7 years ago
4b36a542e0
Merge pull request #7876 from thinkyhead/bf2_hotend_messages
...
[2.0.x] Addressing #7612
7 years ago
12730c1303
[2.0.0] Resolve USE_CONTROLLER_FAN compile errors
...
Add to controllerfan.cpp:
#include "../module/stepper_indirection.h"
#include "../module/temperature.h"
7 years ago
7fb3343bda
[2.0.x] Addressing #7612
...
Change "extruder" to HOTEND in sanity error messages
7 years ago
8998f31ee1
Update LPC persistent store to initialize eeprom.dat with FF
...
This change initialize any data in eeprom.dat beyond the current file size to FF.
That way if eeprom.dat is deleted and created again, it doesn't take the old values or random ones, but rather starts with FF in all positions as a real brand new or erased eeprom.dat
Currently if you delete eeprom.dat and restart the board, the new file is created in the same sector with the same content, since FAT does not actually delete the data, just marks the sector as free. I tested by deleting the file, and then rebooting the board, and checking the file content.
The change can be tested in the same way, deleting, rebooting the board, and then the new content should be all FF.
If an eeprom file already exist with data on it, but smaller than E2END, it will be padded with FF on first access, so it will not have random or old content appended.
7 years ago
2aa22c5a5e
Merge pull request #7874 from thinkyhead/bf2_anet_encoder_pulses
...
[2.0.x] Fixing ANET encoder pulses
7 years ago
f99d1dedae
Fixing #7833
...
Derived from #7873
7 years ago
de84f57a9c
Patch SD file draw bug
7 years ago
ef90b49fff
Remove extra NEWPANEL settings in Conditionals_LCD.h
7 years ago
67a7dd9792
Merge pull request #7866 from thinkyhead/bf2_finally_G33_is_done
...
[2.0.x] Apply G33 updates
7 years ago
b220bc7521
Apply G33 updates
...
Adapted from #7865
7 years ago
9fe7f53216
Misc general spacing cleanup
7 years ago
c0382cd8cd
Add UTF-8 mapper for Slovak language
...
Based on #7862 , #7846 by @rmoravcik
7 years ago
c81843a414
Set TEMP_SENSOR_0 to 1 in CR-10 example config
...
As pointed out in #7692 by @totalitarian
7 years ago
72693a7e87
[2.0.x] Fixed RAMPS FD V1 pins.h file ( #7852 )
...
* test only
test
* Fixed RAMPS FD V1 pins.h file
* Fix typo
7 years ago
aa51a02b8f
LPC1768: fix serial buffer underrun ( #7854 )
...
When the buffer is empty index_write == index_read, but they needed constrained by buffer_mask
7 years ago
46b2773e13
General fixes for LPC1768 ( #7834 )
...
* fixed some include paths
* LPC1768: Fix Serial API
Add missing serial methods used if TX_BUFFER_SIZE is set
Change return value of HalSerial:read to match Arduino API
* LPC1768: add filters to ADC
This is to try and compensate for hardware issue and oversensitivity to noise
* LPC1768: remove the polling section of delayMicroseconds
* LPC1768: lock usb mass storage device while device accesses it.
Currently only applicable to persistent store,
The device always has priority and will unmount the sd card from the host, Windows then tries to automount again so it can look like the explorer window freezes. Linux Mint, by default, just closes the Nemo window.
* Add timeout to make sure if Serial never connects that Marlin still boots
* Remove unneeded ifdef CPU_32_BIT
In general the need for ifdef CPU_32_BIT blocks means that something is missing from the HAL API or a Platform, in this case HAL_TICKS_PER_US was missing from the AVR Platform
* LPC1768: relocate RE-ARM debug_extra_script.py
7 years ago
7258218f89
Fix xon_xoff_state initialization
7 years ago
bf596fb039
Merge pull request #7818 from thinkyhead/bf2_xon_xoff
...
[2.0.x] Add XON/XOFF serial handshaking
7 years ago
ca3c9baf1b
Fix DUAL_X_CARRIAGE manual moves, add T0/T1 menu item
7 years ago
a8b8d4e85e
Add a typedef for MENU_ITEM(function,…) functions
7 years ago
6ea2cc0293
Make prepare_move_to_destination_dualx a proper move function
7 years ago
e472a7569b
Remove extra auto_current_control call
7 years ago
508d764d63
Add serial XON/XOFF handshaking
...
From @ejtagle, originally #7459
7 years ago
af15383578
Add XON/XOFF options to example configs
7 years ago
33c4d45f2f
Merge pull request #7812 from thinkyhead/bf2_fix_resume_print
...
[2.0.x] Fix broken M600 resume_print
7 years ago
a03e70d46c
Fix M600 resume_print
...
Derived from #7811 and #7779
7 years ago
2d41c59320
Tweak some spacing
7 years ago
5ae390e240
Apply NO_MOTION_BEFORE_HOMING to examples
7 years ago
90af1fe5ee
Implement NO_MOTION_BEFORE_HOMING option
7 years ago
965b0ab53e
Spacing adjustments
7 years ago
ac41eb5871
Merge pull request #7722 from tcm0116/2.0.x-warnings
...
Cleanup 2.0.x compiler warnings
7 years ago
ae2173cd52
Synchronize retractions
7 years ago
0cb00f52d9
Cleanup warnings
7 years ago
1beaef0452
fix 3S hang & enable SPLIT
7 years ago
020ce176c4
Fix Servo class compile errors
7 years ago
62054af6eb
2.0 compile issues
7 years ago
bea3ec2724
M355 S0, S1 fixes & faster LCD, SD card
...
fix Travis error
7 years ago
8c622a59cf
Merge pull request #7774 from thinkyhead/bf2_lcd_leveling_status
...
[2.0.x] Show leveling status on character LCD
7 years ago
56c05a7015
Show leveling status on character LCD
7 years ago
2ee4eef25c
Merge pull request #7748 from GMagician/Addressing-#7730
...
[bugfix-2.0.x] Fix compiler error (issue #7730 )
7 years ago
ffed785656
Merge pull request #7768 from thinkyhead/bf2_HAL_STM32F1
...
[2.0.x] HAL for STM32F1
7 years ago
604b804125
Add confirmation step to Init EEPROM
7 years ago
c869dc9745
User script return-to-status option
7 years ago
e9acb63290
STM32F1 HAL
...
Adding files for STM32F1 HAL based on libmaple/stm32duino core.
Current persistent_store uses cardreader changes to be sent in separate
commit, but could be changed to use i2c eeprom.
7 years ago
c2b1d51f16
HAL whitespace and style cleanup
7 years ago
c272f2c84e
Cleanup pins spacing
7 years ago
dff2904c0f
Marlin code whitespace cleanup
7 years ago
599f2ad983
Define pin accessors more like <Arduino.h>
7 years ago
358656acc3
Tweak HAL_adc_start_conversion
7 years ago
0cb4d25431
Tweaks to Servo classes
7 years ago
10c1b442ca
Fixes for Anet10 and gt2560
...
Fixes for 2 "... not declared in this scope" compiler errors.
7 years ago
5a3a53379f
Update pins for GT2560_Rev_A_Plus
...
For PR #7738
7 years ago
fdf1b8a7b8
Fix sanity check for LCD_FOR_MELZI
...
Comes from #7760
7 years ago
b93a55e15f
Fix ST7920_DELAY_2 potentially being unset
...
Comes from #7760
7 years ago
ce1638e32f
Add Babystep Z graphic overlay
...
See PR #7593
7 years ago
49c693c85b
Tweak to serial macros
7 years ago
46709ed7e0
More featureful CR-10 configurations
...
See #7725
7 years ago
2b112143fa
Update Sanguinololu config version
7 years ago
7cd5eb6d42
Update LEVEL_BED_CORNERS config option
7 years ago
981a610f75
Disable BABYSTEP_XY, add to SDSORT comment
7 years ago
4c5be9bb05
Fix a PARKING_EXTRUDER comment
7 years ago
494b0eba2d
Config spacing fix
7 years ago
2281154025
Increase BABYSTEP_MULTIPLICATOR to 100
7 years ago
92dbf5f148
Fix babystep edit label, allowing translation
7 years ago
37eb6d1732
Babystepping code tweak
7 years ago
7a29f802d0
Fix ENCODER_PULSES_PER_STEP for G3D_PANEL
7 years ago
5972251b17
No need for unused LCD_PINS_Dn
7 years ago
c508e9adec
Fix compiler error
...
Added missing include file,
called 'leveling_is_active()' with no prototipe defined.
7 years ago
c4e4a0688c
Fix bug in SD Autostart
...
As pointed out by @marcio-ao in #7638
7 years ago
6d5fcac54a
G33 changes from 1.1.x
7 years ago
f58ba3a64e
Improve AVR arch detection
...
Replace ARDUINO_ARCH_AVR with __AVR__ to better detect architecture for non-Arduino dev environments. Resolves compile failure in PIO for 8-bit Teensduino targets
More info:
https://forum.pjrc.com/threads/33234-Using-Teensyduino-Selecting-Teensy-3-2-3-1-board-has-incorrect-platform-define
http://www.atmel.com/webdoc/avrlibcreferencemanual/using_tools_1using_avr_gcc_mach_opt.html
7 years ago
71d63fcafb
Apply LCD changes from 1.1.x
...
Changes from #7720
7 years ago
1587962547
Combine G-code files into fewer units
...
Addressing #7707
7 years ago
bfd1e75c04
Patch for caselight + lcd compile issues
7 years ago
ff1f211eb4
Merge pull request #7695 from tcm0116/move_framework
...
Move LPC1768 framework out of Marlin source folder
7 years ago
ddbd4b73e0
Move LPC1768 framework out of Marlin source folder
7 years ago
00b1b33816
Fix compiler warning
7 years ago
f37ed314e0
Friendly layout for Arduino IDE
7 years ago
06a02dd200
Workaround for SCK/MOSI pins on VIKI
7 years ago
f9ef446fb5
Clean up after refactor
7 years ago
64dfb46461
Move z_endstop_adj to Endstops
7 years ago
2e20c53c9d
Move endstop debug to Endstops
7 years ago
a10451ceed
Move Volumetric methods to Planner
7 years ago
6f92ab7eed
Move Controller Fan to feature
7 years ago
07cf75883f
Move T (tool change) to cpp
7 years ago
927524af6b
Move M999 to cpp
7 years ago
1a37ebc76d
Move M163-M165 MIXING_EXTRUDER to cpp
7 years ago
8ca0b2fd68
Move M355 caselight to cpp
7 years ago
59608086e6
Move M350_M351 to cpp
7 years ago
6e0503eab2
Move M907-M910 to cpp
7 years ago
2e89685154
Move TMC2130 g-codes to cpp
7 years ago
19dde5be03
Move M900 to cpp
7 years ago
1b0acbff72
Move M605 to cpp
7 years ago
75cf17d816
Move M702 MK2_MULTIPLEXER to cpp
7 years ago
7ba2ab4fb3
Move M540 to cpp
7 years ago
a90c7dbf64
Move M500-M503 to cpp
7 years ago
aab5489962
Move M428 to cpp
7 years ago
1fe25271e4
Move M401_M402 to cpp
7 years ago
0589884d26
Move M400 to cpp
7 years ago
4a220a8b79
Move M380_M381 to cpp, solenoid feature
7 years ago
9be8cb0ac9
Move M360-M364 to cpp
7 years ago
828405cac8
Move M302 to cpp
7 years ago
8584f7e390
Move M250 to cpp
7 years ago
ebb9bd5419
Move M240 to cpp
7 years ago
d4aaa0f1c8
Move M304 to cpp
7 years ago
609c4eea32
Move M301 to cpp
7 years ago
4f14849675
Move M300 to cpp
7 years ago
6ed5252884
Move M280 to cpp
7 years ago
d4d3d92f8a
Move M260_M261 to cpp
7 years ago
3e761696a0
Move M226 to cpp
7 years ago
0e319104c2
Move M220 to cpp
7 years ago
234de3547c
Move M211 to cpp
7 years ago
6c7bad8bc3
Move M666 to cpp
7 years ago
f5877aa93e
Move M665 to cpp
7 years ago
33861d4e04
Move M206 to cpp
7 years ago
7aca9fe2f7
Move M203-M205 to cpp
7 years ago
b3822b9242
M202 is unused
7 years ago
5e63efc1d9
Move M201 to cpp
7 years ago
92c15f5578
Move M150 to cpp
7 years ago
eef4a54778
Move M119-M121 to cpp
7 years ago
379f16558e
Move M118 to cpp
7 years ago
811c32b85a
Move M117 to cpp
7 years ago
1d2061c935
Move M115 to cpp
7 years ago
81b8fbf4d6
Move M114 to cpp
7 years ago
5d2681a105
Move M100 to cpp
7 years ago
beb346e49f
Move M92 to cpp
7 years ago
381b17e6a9
Move M18_M84, M85 to cpp
7 years ago
a911215b0e
Move M82_M83 to cpp
7 years ago
4b9d1b9f26
Move M80-M81 to cpp
7 years ago
0c7ba52451
Move M149 to cpp
7 years ago
cbf40f7ee9
Move M145 to cpp
7 years ago
b464887ea1
Make BARICUDA a feature
7 years ago
14a5d2a273
Move M113 to cpp
7 years ago
06f3c8029e
Move M111 to cpp
7 years ago
a831977dee
Move M110 to cpp
7 years ago
7479ff98b7
Move M140, M190 to cpp
7 years ago
5b3e49babd
Move M108, M112, M410 to cpp
7 years ago
df0432c7c8
Move M155 to cpp, auto-report to Temperature
7 years ago
df031ab100
Move M106_M107 to cpp
7 years ago
99c4b9050a
Move M105 to cpp
7 years ago
a41130f854
Temp stat LEDs
7 years ago
2c1eda9e00
Move M75-M78 to cpp
7 years ago
fc52fc72ac
Move M48 to cpp
7 years ago
be8d913484
Move M43 to cpp
7 years ago
10fab24e50
Move M42 to cpp
7 years ago
69b664b6fe
Move M31 to cpp
7 years ago
a442c34a1a
Move SD commands to cpp
7 years ago
be0e4a4ad0
Consolidate pause, apply to M125, M600, M24
7 years ago
adca4a9b79
Move M17 to cpp
7 years ago
33e00b6cd6
Move M3-M5 to cpp
7 years ago
04583d46af
Move M0_M1 to cpp
7 years ago
04376975ce
Move G92 to cpp
7 years ago
931aa79d85
Move G42 to cpp
7 years ago
84ddae56a8
Move G38 to cpp
7 years ago
b8adae0785
Move G31_G32 to cpp
7 years ago
9db5d21837
Move G30 to cpp
7 years ago
13136376ee
Move G27 to cpp
7 years ago
a1ee1628e5
Move G20_G21 to cpp
7 years ago
9b4aa5ea8b
Move G17-G19 to cpp
7 years ago
94d9def81c
Move G12 to cpp
7 years ago
56f4a43535
Move G5 to cpp
7 years ago
760f29a88e
Move G4 to cpp
7 years ago
4007cbfe9e
Move G2_G3 to cpp
7 years ago
27f7e3fe6f
Hide problem pins in pin debug list
7 years ago
9c21191f74
Rename SPI class to avoid conflict (good?)
7 years ago
51f195e698
Move dwell to gcode
7 years ago
4f1eadf41f
FILAMENT_WIDTH_SENSOR feature
7 years ago
d5fe0fb02b
Consolidate PrintCounter
7 years ago
551752eac7
Consolidate "bedlevel" code
7 years ago
71aefc2e22
Move heater output to Temperature class
7 years ago
63228fc453
Move volumetric flag to GCodeParser
7 years ago
bf7af95db3
Move flow_percentage to Planner
7 years ago
8dc2838d98
Move host keepalive to GcodeSuite
7 years ago
8fbb833de9
Encapsulate RGB(W) LEDs
7 years ago
a98e9874db
FWRETRACT as a feature
7 years ago
722786966a
Add gcode.cpp, motion.*, queue.* - Apply to some G-codes.
7 years ago
4231faf779
Initial split-up of G-code handlers by category
7 years ago
e0a189a481
Consolidate Buzzer
7 years ago
bca67a5b79
Main controller updates
7 years ago
142d8aae56
Move debugging to serial.*
7 years ago
a1e2b5da70
Fix LCD_PINS_Dn tests in pinsDebug_list.h
7 years ago
038f82cc38
Fix L6470 init and options
7 years ago
42e2dd9251
Build file updates
7 years ago
614a86a380
SD file updates
7 years ago
82fff87e16
Pins updates
7 years ago
3d8a0ab4b2
Module updates
7 years ago
0fcec02db5
LCD updates
7 years ago
7dd0a46732
Language updates
7 years ago
4a82e95c3e
Feature file updates
7 years ago
d7ee81202f
Libs updates
7 years ago
34101224c4
Inc updates
7 years ago
f52a31a275
Core updates
7 years ago
479652073b
Config updates
7 years ago
54326fb06a
HAL updates
7 years ago
7e42c7563c
Move build files into place
7 years ago
b66d65f865
Move 'sd' files
7 years ago
0b9a88d6ce
Move 'pins' files
7 years ago
2b3b7d5d7f
Move 'thermistor' files
7 years ago
0c9231fd04
Move 'module' files
7 years ago
efa578d6b0
Move 'libs' files
7 years ago
cc92e544a5
Move 'lcd' files
7 years ago
5be07b5db2
Move 'inc' files
7 years ago
9ea2ff950a
Move 'gcode' files
7 years ago
4e4d16c92e
Move 'core' files
7 years ago
fa5f9c2aec
Move 'feature' files
7 years ago
f536c4dccb
Move configs
7 years ago
48351fd6d5
Move root sources
7 years ago
27cbb939b2
Clean up some HAL code
7 years ago
b29b66feda
Temporary fix for odd stepper behaviour with servos
7 years ago
8afe13b1a2
Fix compile issue when watchdog was disabled
7 years ago
b908e38d08
Add needed platform defined gaurds to compile with Arduino IDE
...
Also removed explicit platform HAL directory inclusion from platformio.ini to make sure these errors are caught by Travis in the future
7 years ago
a037ddbf7b
Other spacing tweaks
7 years ago
2af62a5d8d
Apply spacing, const to some HAL code
7 years ago
fa9ff6be6e
try to fix LIN_ADVANCE for 32bit
7 years ago
18f97c4013
add HardwareSerial and SoftwareSerial for Re-ARM.
...
HardwareSerial has been tested on Uart0 (debug header) and Uart3 (i2c connector)
Software Serial has been tested to work bi-directionally at 9600 and 115200
using pins 6 and 63 on J5, and unidirectionally (write only) at 250000.
The code used to test was Teemuatlut's tmc2208 patch, and a few small changes to main used to echo recieved chars back to a host pc.
7 years ago
01fb45b4f8
hybrid PWM system
...
Uses PWM1 to directly control pins 4, 6 & 11 (servo 0, 1 & 3) and PWM1
generated interrupts to control other pins.
Interupt control of the servo pins had too much jitter so switched all
that we could to PWM1 direct control. The PWM1 direct control pins have
less than 1 microsecond pulse width jitter while the interrupt
controlled ones can have 20+ microseconds of jitter.
Also added insurance to the servo code in the "disable servo after move"
section.
7 years ago
94dd39b3b7
LCD_UBL_memory_slot_corrections ( #7516 )
...
* LCD_UBL_memory_slot_corrections
Changed the memory slot edit function to work with the
`settings.calc_num_meshes()`
* Add a little more safety margin...
* More corrections
Error handling when the EEPROM is not available.
7 years ago
8587c4e1ec
Minor corrections to 32-bit branch ( #7514 )
...
Mostly... clean up some compile time warnings for the 20x4 LCD Display.
7 years ago
7342d5c07a
ST7565
7 years ago
97444391e0
Servo & PWM support for LPC1768 ( #7500 )
7 years ago
859fa35287
Re-Arm bugfixes ( #7495 )
...
* UBL_correction
* RGB Map function
7 years ago
d80877d570
Set pinMode with every digitalWrite (legacy compatibility)
7 years ago
9a950e3a5a
Update the delay functions and change the default pinmap for character displays ( #7434 )
7 years ago
105324b85b
Match the license headers in other files
7 years ago
69704b93f2
ultralcd.cpp fix compile error - switch to int16_t
7 years ago
61c0a10efe
Revert "SPI API platform implementation stubs" ( #7416 )
...
This reverts commit 2dfa6ca72a2e8d43caf4932ca0d35792f0638917.
Revert "Base HAL SPI Changes"
This reverts commit 2afc521b8b6a81b2281a038f1b99a69f4a008e64.
Revert "Initial HAL SPI API"
This reverts commit 58f7ffe09ab5bc034b6510f5204f8d342138abaa.
7 years ago
a5cf3a190c
bugfix-2.0.x critical fix ( #7401 )
...
* Fix mistake in gitignore file and add in missing core files.
The missing leading slash on "lib" meant all folders names lib in the directory tree are ignored, rather than just the top level PlatformIO lib folder
* Add LiquidCrystal Library and associated headers modified to compile.
7 years ago
76da81c1de
minimize SD card reads when using SDCARD_SORT_ALPHA (Re-ARM board)
...
Because of the Re-ARM card's pinout there is only one SPI connected to
the RepRap Discount Full Graphic LCD display. The LCD responds to ANY
SCK transitions no matter if it's enable is inactive. The result is
garbage (usually bars) on the LCD display whenever there is SD card
activity.
This code minimizes this by only accessing the SD card when changing
directory levels if :
SDCARD_SORT_ALPHA is enabled
SDSORT_USES_RAM is true
SDSORT_CACHE_NAMES is true
The code changes result in file names being pulled from the ALPHA SORT
memory array rather than the SD card.
The code also gives the file count and file index functions their own
variables. When they shared a common variable the index function
sometimes resulted in the file count being short by 1.
=======================================================================
cardreader.cpp & pins_RAMPS_RE_ARM.h changes
Added another condition to cardreader.cpp to enable getting file names
only from RAM.
pins_RAMPS_RE_ARM.h :
Added comments about the SD card accesses and the LCD display
Combined all versions into this one.
7 years ago
84a11cfedc
HAL compatible pinsDebug & misc
...
Re-ARM has been tested. AVR has not been tested.
1) moved all cpu specific items to files in the low level HAL directory
for that CPU (pinDebug_Re-ARM.h & pinsDebug_AVR_8_bit.h
2) added pinsDebug.h to the top level directory
3) modified HAL_pinsDebug.h to select the correct support file for the
selected CPU
4) Patched sanitycheck to stop throwing false errors. A long term
solution will be done
5) misc changes & bug fixes
arduino.cpp - included macros.h to fix a missing definition
pinmap_re-arm.h - removed a duplicated line.
pinmapping.h - changed from "ENABLED" to "defined" to fix a compile
error
======================================================================
split SanityCheck up, improve pinsDebug system
======================================================================
switch to latest pins_RAMPS_RE_ARM.h
7 years ago
32e759c928
SPI API platform implementation stubs
7 years ago
4183a249b6
Moved CMSIS and other LPC1768 dependencies
...
Fixes Arduino IDE builds for 8-bit AVR,
misc: Adafruit NeoPixel currently incompatible with Teensy 3.5-6, blacklisted
7 years ago
b55295ad33
Post merge fix
...
Add macros.h to allow Enabled macro, also need to reference include files directly
7 years ago
c66d1ac651
Debug Pins Support
7 years ago
a31e32969f
Base HAL SPI Changes
7 years ago
bcd050f33b
Initial HAL SPI API
7 years ago
44b0c186a6
HAL for Re:ARM (LPC1768) architecture
7 years ago
f3e562e46e
HAL for 32-bit Teensy (3.5, 3.6) architecture
7 years ago
cfef925559
HAL for DUE architecture
7 years ago
4b16fa3272
Implement HAL and apply macros across code-base
...
Implement AVR Platform
7 years ago
e4fcf460e7
Marlin bugfix-2.0.x Version/README
7 years ago
367e1b54ba
Merge pull request #7591 from thinkyhead/bf1_misc_patches
...
M111: no args reports current flags
7 years ago
8a184a526a
Marlin: Patch G33, allow M111 to give status
7 years ago
353c23b16e
Enforce BED_CENTER_AT_0_0 on Delta, SCARA
7 years ago
898f48e331
CNC workspace planes for G5
...
According to LinuxCNC, G5 should throw an error if the current plane mode isn't XY.
7 years ago
5851c2d36f
MAX7219 followup ( #7564 )
...
* Add MAX7219_DEBUG to Travis CI testing
* Tweak config and use standard pin naming for MAX7219_DEBUG
* MAX7219: Apply coding standards, use macros, etc.
* Make code work...
7 years ago
52073f21c5
Merge pull request #7556 from thinkyhead/bf1_slovak_language
...
Slovak UTF-8 translation
7 years ago
321f98f867
Fix servo delay in Folgertech config
7 years ago
36771e9492
Fixes required for Creality CR-10
7 years ago
3f0b38ed5d
Add Max7219 LED Matrix Debug Support ( #7563 )
...
* Add Max7219 LED Matrix Debug Support
The Max7219 8x8 LED Matrix's are very helpful for debugging new code.
And for that matter, just trying to maximize printer settings without
causing stuttering.
The displays are very inexpensive (under $2.00 with shipping) and
provide a lot of help when trying to debug complicated code.
* Try to keep Makefile up to date.
7 years ago
0067bb2840
Addressing #7552
...
When M405 is used it changes 'volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]' value. When M406 disables M405 it leaves the value unchanged.
This PR applies 'calculate_volumetric_multipliers' in M406 instead of resetting it to 1.0 because M200 may not be compatible with M405 hence I'm sure to restore anyway with correct value.
7 years ago
2b12093589
Merge pull request #7532 from thinkyhead/bf1_fan_mux_vben
...
New feature: Part-Cooling Fan Multiplexer
7 years ago
54d48130f3
Slovak UTF-8 translation
...
Slovak UTF-8 translation
7 years ago
86c024ce98
Organize, document pins.h include lines
7 years ago
c7b07d20f2
Minor patches to pins files
7 years ago
356af7dcb0
Tweak Sanguinololu-related pins files
7 years ago
11a724d8fc
Sanguinololu example configuration
7 years ago
e337df2e98
Miscellaneous tweaks to serial outputs, code cleanups
7 years ago
c0409b85e7
New feature: Part-Cooling Fan Multiplexer
7 years ago
e82e9073d6
Merge pull request #7530 from GMagician/Code-reduction
...
Code reduction with some configurations
7 years ago
6127154af3
Fix identation by tab
...
There was a tab instead of spaces
7 years ago
b94a1c6b9f
Code reduction this some configurations
...
When switching noozle and extruder but these operations are done by the same servo in 'setup' function there is a unnecessary call
7 years ago
405a2132f3
#7529 compile fix
...
I made an error in previous fix
7 years ago
869d7f3703
#7504 missing part
...
#7504 integration has missed this part.
When more than 1 servo is used with bltouch it's impossible to predefine default servo delay for it.
In my original fix I completely removed this part but maybe this is a better compromise
7 years ago
101ba70517
Merge pull request #7505 from thinkyhead/bf1_anet_1_pio
...
Add Anet 1.0 to Platformio.ini
7 years ago
4817b39d98
Added new feature for AutoParking Extruder (APE)
7 years ago
6772e33ef6
Use [XY]_CENTER for error correction
...
Followup to #7512
7 years ago
385f1bb9e5
Merge pull request #7504 from thinkyhead/bf1_servo_delays
...
Individual servo delays
7 years ago
2a31c9f2ce
Merge pull request #7515 from cdedwards/bugfix-1.1.x
...
Fix for G26 spam output
7 years ago
5fa61c0ad3
Add Anet 1.0 to Platformio.ini
...
Added env:anet10 to platformio.ini for easy compile and upload to this board
7 years ago
b3f59ec945
Merge pull request #7519 from thinkyhead/bf1_cleanups_aug_16
...
Add "Level Corners" menu item
7 years ago
b33739d493
UBL_Language_Update ( #7520 )
...
* UBL_Language_Update
Translatable strings
* Use slightly better wording...
* Use slightly better wording...
7 years ago
a1878cd1c0
Add "Level Corners" menu option
7 years ago
0a18fb735e
Use "PSU" label to fit on screen
7 years ago
30887feae3
Tweak some formatting in ABL G29
7 years ago
257b693ab0
Advanced pause fixes ( #7518 )
...
* Disallow filament change while paused
* Use kinematic movemements in pause_print and resume_print
7 years ago
ab2ac1af71
UBL_LCD_storage_corrections ( #7517 )
...
Correcting the storage selection.
Also EEPROM error handling on the LCD.
7 years ago
f1843211e6
Fix for G26 spam output
...
while heating, G26 will continuously spam the heater states instead of printing it out every 5000ms.
7 years ago
be5ca34215
Allow G29 to work correctly even if nozzle is off the mesh. ( #7512 )
...
* work around previous regressions...
7 years ago
06541ec885
Merge pull request #7448 from thinkyhead/bf1_delta_fixes
...
Prevent damage if DELTA_HEIGHT is set badly
7 years ago
e9c72978c7
Implement SERVO_DELAY as array
...
This modify give SERVO_DELAY x servo basis
7 years ago
96ae53cf41
Use MOVE_SERVO macro where possible
7 years ago
3be9c19f12
Hold on move axis screens
7 years ago
8fd58cd6dc
Patch goto labels for consistency
7 years ago
75e6f72c89
Fix hexadecimal number formatting
7 years ago
ac76101ec3
Eliminate goto in gcode_M48
7 years ago
75e6ead5fd
Eliminate goto in gcode_G33
7 years ago
6bd63d27b5
Updates to G29 for probe error handling
7 years ago
f54e0fc90f
Prevent damage if DELTA_HEIGHT is incorrect
7 years ago
0938c62b48
Neater position_is_reachable call
7 years ago
9d95b1b4df
Tweak Conditionals_post.h
7 years ago
35d5a7bdff
Tweak CR-10 config/pins
7 years ago
419c8969a7
Merge pull request #7479 from thinkyhead/bf1_fix_italian
...
Fix Italian string length
7 years ago
25a11cd485
Use bed size and inset instead of travel limits to define mesh area\n\nAs proposed in #7435 ( #7480 )
7 years ago
7f3406d47b
Fix Italian string length
...
Addressing #7264
7 years ago
97c21e9007
Support for Geeetech GT2560 Rev.A/Rev.A+
7 years ago
b2822a59f9
Add a sanity check for valid bed size
7 years ago
a7e5c1bf19
Use float to init TMC2133 steps-per-mm
7 years ago
dd66d21749
Extend DEACTIVATE_SERVOS_AFTER_MOVE sanity-check
...
As proposed in #7429
7 years ago
b370906031
Example config for Geeetech I3 Pro X with GT2560 controller
7 years ago
804818b4d9
Bring configs up to date
7 years ago
dd841a3675
Merge pull request #7410 from benlye/user-script-feedback
...
Make audible user script feedback optional
7 years ago
0fd2923a9f
Fix compilation with ADVANCED_PAUSE_FEATURE without SDSUPPORT ( #7412 )
...
* Fix compilation of ADVANCED_PAUSE_FEATURE without SDSUPPORT
* Fix Identation
* Make use of IS_SD_PRINTING macro
as per @MagoKimbra
7 years ago
24af9e1bf4
Make audible user script feedback optional
...
Add a parameter to enable/disable audible user script feedback
7 years ago
6827a162bb
Update language_de.h
...
Add
MSG_BLTOUCH
MSG_DELTA_SETTINGS
MSG_UBL_MESH_EDIT
MSG_UBL_OUTPUT_MAP_BACKUP
MSG_UBL_STEP_BY_STEP_MENU
MSG_Z_FADE_HEIGHT
7 years ago
3497153cf1
Followup cleanup patch
...
Fix regression in #7428
7 years ago
16f8c4865a
Merge pull request #7409 from FHeilmann/bf_update_ru_translation
...
Update Russian Translation
7 years ago
622048ffb0
Clean up whitespace, trailing space, bad tab conversion, etc.
7 years ago
2cbdc0ebb6
Fix large Z corrections when nozzle moves off of UBL mesh ( #7415 )
7 years ago
650e5274c4
Update Russian Translation
7 years ago
ce65c13a97
Merge pull request #7398 from fiveangle/bf_lcd_bed_level_requirements
...
Clarify LCD_BED_LEVELING requirements
7 years ago
936dfb965c
Clarify LCD_BED_LEVELING requirements
...
LCD_BED_LEVELING requires PROBE_MANUALLY with auto bed leveling enabled. See #7396
7 years ago
ffe3013bb5
Fix for #7395
...
Filament change causes freeze during paused print. This PR disables Filament change in the prepare menu when a print from SD Card is paused. See #7395
7 years ago
e948f77cf9
Fix DUAL_X_CARRIAGE not moving at all
...
Axis would only move when homing.
Bug introduced in 91841d75c9Fixes #6956 , fixes #7050 and fixes #7291
7 years ago
08b0456d91
Merge pull request #7379 from thinkyhead/bf_manual_bed_level_floor
...
Manual Bed Leveling: Goto previous Z height at each probe point
7 years ago
936d00dda8
Implement probing delay for piezo sensors
7 years ago
29eef360d0
Merge pull request #7308 from thinkyhead/bf_cleanup_config_adv
...
Fixes for FWRETRACT
7 years ago
894608f8a3
Manual Bed Leveling: Goto previous Z height at each probe point
7 years ago
ff06e1a030
Merge pull request #7372 from tcm0116/delta_calib_menu
...
Move Delta Calibration menu to the Prepare menu
7 years ago
15e009b6ca
Move Delta Calibration menu to the Prepare menu
7 years ago
bfd396c13a
Patch to fix some compiler warnings
7 years ago
48c5f3dddf
Tweak kill action #ifdef
7 years ago
be7a9a07c5
Don't reset grid with `G29 Q` + PROBE_MANUALLY
7 years ago
dfe670247d
Merge pull request #7363 from marcio-ao/bugfix-1.1.x
...
Makefile fixes and U8G support.
7 years ago
af83c512b8
Added support for U8G.
7 years ago
4eff18854b
Rename options with swap_ prefix
7 years ago
14482d2f2a
Strip auto-retract for impossible M(IN|AX)_AUTORETRACT combo
7 years ago
9fc72422e4
Don't let the flow multiplier affect retract/recover length
7 years ago
fee696db5d
Improve retract() for G10/G11/autoretract
7 years ago
423b0f3a1e
Replace MIN_RETRACT with MIN_AUTORETRACT, MAX_AUTORETRACT
7 years ago
51864fd365
Add bed size as a configuration option
7 years ago
dc7c95e07b
Remove `@ section fwretract`
7 years ago
4718c09c48
Remove extraneous USBCON defines for AT90USB boards
...
USBCON is definied by serial.h pullikng in MarlinConfig.h which in turn pulls in Arduino.h. Defining in later includes has shown to cause compile issues so removing all extraneous calls for and potentially easier future linker troubleshooting.
more USBCON unification
7 years ago
890e7a16a9
Add support for Printrbot Neopixel RGBW strip.
...
Connected as described at http://printrbot.com/shop/led-strip/
Based on patch by Kelly Anderson <kelly@xilka.com> at
http://www.xilka.com/printrbot/marlin/1.1.4/20170707/
7 years ago
a059e95463
Bring Infitary i3 config up to date
7 years ago
d6d6043548
Merge pull request #7338 from thinkyhead/bf_mks_ps_on_pin
...
MKS 1.3+: Add pin mapping for PS_ON
7 years ago
851f9f5399
Update Russian translation - Part 1
...
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
7 years ago
b7a16e4468
Merge pull request #7315 from fixoid/patch-1
...
Fixing SWITCHING_EXTRUDER feature to work with HOTENDS > 1
7 years ago
f38b8c5bf8
MKS 1.3+: Add pin mapping for PS_ON
...
This allows the use of D4 as PS_ON since MKS Gen doesn't have a PS_ON pin. However this effectively allows only 3 servos (instead of 4).
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
7 years ago
8a3bc6be4d
Improve FWRETRACT config options and commentary
...
Add more details as requested in #7198
7 years ago
b0173ccdb9
Drop extra initializers for vars initialized by EEPROM code
7 years ago
7afafb05b8
Split G10/G11 into separate functions
7 years ago
c45798694f
Add some more requirements to the G-code list
7 years ago
72de280c1e
BARICUDA valve pressure consistently uint8_t
7 years ago
4d98e3f0a7
General cleanup
7 years ago
e530c67349
Fixing SWITCHING_EXTRUDER feature
7 years ago
2ad3ca5d8a
Bugfix ( #7310 )
7 years ago
37a6833d7e
Allow the sampled point to be added into the Least Squares Best Fit ( #7289 )
...
Without this... The LSF won't work because none of the sampled points
in this code block get added.
7 years ago
a519b093b9
Fix build by replacing qr_solve by least_squares_fit. ( #7285 )
...
This was broken by 9af67e2446
7 years ago
0873c667fa
Apply coding standards to recent merges
7 years ago
8c2907d10f
Fix ABL broken by recent change
7 years ago
9af67e2446
Save 7714 bytes of program memory when doing AUTO_BED_LEVELING_LINEAR ( #7276 )
...
We can save more and a pile of RAM by eleminating the eqnBVector and
EqnAMatrix arrays next.
7 years ago
76e90b93b7
Volatile keyword not needed for parser.seen
7 years ago
00e4ced58e
Stay in User Menu after command. Add feedback.
...
When a user executes a User Menu command, the LCD returns to the main menu. If the user has multiple menu items they want to run, such as one menu item per bed leveling corner, then it's better to stay in the User Menu rather than return to the main menu.
This PR modifies Marlin to stay in the User Menu after a command.
7 years ago
1066b17457
Merge pull request #7260 from thinkyhead/bf_G33_update_27
...
Updates to G33 and its LCD code
7 years ago
e927941c06
Bugfix ( #7265 )
...
Fix compile error when UBL is enabled but there is no LCD Panel.
7 years ago
68aea9c01d
Merge pull request #7261 from thinkyhead/bf_configs_by_vendor
...
Arrange more example configs by vendor
7 years ago
aaacef9441
Corrections ( #7231 )
...
20x4 map integration. Also some minor changes to the UBL Menu layout. Both 20x4 LCD's and Graphical LCD panels should have similar functionality now.
7 years ago
4bc79ec877
Updates for G33-LCD interface
7 years ago
186580b55f
Arrange example configurations by vendor
7 years ago
6be369f3ea
Add some config names to AUTHOR
7 years ago
7fc31a7940
Merge pull request #7258 from thinkyhead/bf_cleanups_jbrazio
...
Add support for BQ heated bed kit with Hephestos 2
7 years ago
11e376e920
Merge pull request #7256 from thinkyhead/bf_cleanup_july_6
...
Assign -1 to LCD_PINS_D4-7 if not defined
7 years ago
2065591daf
Add support for BQ heated bed kit with Hephestos 2
7 years ago
61be28133d
Support for Creality CR-10
...
Creality board is a Melzi / Sanguinololu variant, but using different pins for LCD control (and maybe other minor variations)
7 years ago
9248a90a4c
Assign -1 to LCD_PINS_D4-7 if not defined
7 years ago
5ef1e5ef60
Tweaks for M43
7 years ago
c7732db99d
Fix: Use of digitalRead, digitalWrite breaks on AT90USB
7 years ago
f713f25fa5
Clean up excess whitespace
7 years ago
fc9ce65095
Add `BUSY_WHILE_HEATING` for hosts that need it
7 years ago
c6d430670a
Clear SHOW_BOOTSCREEN with no LCD
7 years ago
11c589c3ec
Fix compile issue with G38
...
Fixes #7250
7 years ago
678914be25
Patch M23 to work around Simplify3D bug
...
Addressing #7227
7 years ago
3efe4aeef8
Add PROBE_MANUALLY support to G33
7 years ago
cca1cca3a5
Merge pull request #7237 from thinkyhead/bf_cz_mapper
...
UTF-8 mapper for Czech
7 years ago
a2babb532d
Merge pull request #7217 from benlye/add-kill-action
...
Add configurable action command to send when printer is killed
7 years ago
8c34233452
UTF-8 mapper for Czech
7 years ago
20f6676d63
DISABLE_[XYZ] compatibility check
...
DISABLE_[XYZ] is incompatible with HOME_AFTER_DEACTIVATE and Z_SAFE_HOMING
7 years ago
c28749a567
Add kill action
...
Sends pre-defined string as action command when printer is kill.
7 years ago
df87278fce
Add "CAP:PRINT_JOB:1" (M75 / M76 / M77) to M115 output
7 years ago
4be8d7720e
Fix spelling of "Chinese"
7 years ago
567941e341
Fix for issues #6997 and #7152
...
Probing with the effector in the printing area, but an eccentric probe (e.g. allen key) outside it but still touching the bed gives meaninfull information for calibration. Since calibration is most accurate when probing as close to the towers as possible the testing was way to restrictive hence this fix.
7 years ago
57fff2e95e
Merge pull request #7219 from thinkyhead/bf_update_git_scripts
...
Update Marlin+git helper scripts
7 years ago
6a3967ee33
Corrections for probe_pt parameters
7 years ago
534bffa7a9
Correct comment on ABL G29
7 years ago
e1e1a0c344
Provide a default CUSTOM_BOOTSCREEN_TIMEOUT
7 years ago
69297b2d7b
Make all EEPROM optimization options available
7 years ago
d609489b22
Drop setup_homepin
7 years ago
167169e1bf
Sanity check for a real probe with M48
7 years ago
395a9f59ac
Merge pull request #7211 from thinkyhead/bf_lcd_bootscreen
...
Use lcd_bootscreen for both
7 years ago
14663efe0d
Merge pull request #7210 from fiveangle/printrboard_revf_cleanup
...
Printrboard RevF cleanup
7 years ago
ae5923a3d0
Make lcd_bootscreen common to both
7 years ago
859248433f
Patch for gcode debug
7 years ago
09c90c2f6c
Printrboard RevF Cleanup
...
-Update Arduino IDE extension descriptions
-Set default motor currents if not defined in Configuration_adv.h
-Support for MINIPANEL LCD
-Support for choosing internal or panel SD
7 years ago
232a10410d
LCD_FOR_MELZI
7 years ago
76c92a1fab
Clean up some trailing spaces
7 years ago
cf96109056
Implement the EEPROM_CHITCHAT option
7 years ago
dcec7178d1
Expose DISABLE_M503 option as a test option
7 years ago
3e78a01262
Merge pull request #7204 from thinkyhead/bf_update_ubl_lcd
...
UBL radar map corrections
7 years ago
1ff7d10c80
Add configuration for Infitary M508 (i3 clone)
...
Based on Infitary's own firmware settings.
7 years ago
4cb45c10dd
Patch ubl lcd mesh map indentation
7 years ago
abd6ba62b4
Some cleanups for ubl lcd mesh map
7 years ago
f17bae1f70
Changes for ubl_lcd_map_control patch
7 years ago
8e0f3b7eba
UBL radar map corrections
7 years ago
fcceed5be6
intermittent Teensy & G26 compile problem
...
===============================================
also an issue with ubl_motion.cpp
7 years ago
30b327d24c
Finish the solution for #7166
7 years ago
6c97c5595c
Add a sanity check for DELTA_AUTO_CALIBRATION
7 years ago
e6e3132f79
make LETTTER_OFF return values that match param indices range
7 years ago
bfbf5f8200
correct value_bool() when FASTER_GCODE_PARSER is enabled
...
Also corrected compile issue when DEBUG_GCODE_PARSER and
AUTO_BED_LEVELING_UBL are both enabled.
7 years ago
406ef69702
Move Anet A8 config to subfolder
7 years ago
379926961c
Add Anet A6 config, edit Anet A8 config
7 years ago
5b03f23fa2
Bring configurations up to date, fix some comments
7 years ago
e3cedfa0ec
Fix a compiler warning
7 years ago
bb0508b6cf
Fix comment in M115 code
7 years ago
85777a56c6
Add A (action) and E (echo) parameters to M118
7 years ago
d1e8d4cd9d
Merge pull request #7167 from thinkyhead/bf_20x4_lcd_update
...
UBL Map Cleanup and LCD display
7 years ago
b492e0878d
Changes to reduce and simplify
7 years ago
98d362c2da
Adding M118 command to send text to serial
...
Allows the user to send text to the serial console in order to
communicate with a host - sending debuging information or action
commands, for example. Text must begin with '//' and this is added if
it is not already present at the beginning of the string.
7 years ago
80abc872f3
Updated to better support the coming "radar"
7 years ago
e90cbf5c16
UBL Map Cleanup
7 years ago
fc140c4962
Followup for I2C_POSITION_ENCODERS
7 years ago
f4246dc8ff
Merge pull request #7165 from thinkyhead/bf_parser_shorthand
...
Use parser.seenval, add shorthand functions
7 years ago
bd776df8c1
Optimize seen_axis by moving 'X' to index 24
7 years ago
05449cf6ee
Add shorthand value accessors to gcode.h
7 years ago
12f092c812
Cleanups to gcode.h, use seenval()
7 years ago
941943c167
Apply const, spacing, etc.
7 years ago
5b11b33854
Add support for Průša MK2 Multiplexer
7 years ago
a4a587a897
Fix spelling of Průša
7 years ago
ba1706a265
Fix spacing in gcode.cpp
...
Followup to #6940
7 years ago
c2c8aafda2
Merge pull request #7157 from thinkyhead/bf_g33_f_parameter
...
G33 F and Height bug fix
7 years ago
627afb29df
Merge pull request #7109 from tnw513/fix-italian
...
added missing italian translation
7 years ago
f0f9fb7465
Remove line that does nothing
7 years ago
99592c8458
Update G33: Add F, fix height bug
7 years ago
31514f453a
Fix #ifdef AVR_AT90USB1286_FAMILY in pinsDebug
...
Can't compile with PINS_DEBUGING enabled on Atmega1284p because it tries
to enumerate pins 46 and 47 (which don't exist) because `#ifdef
AVR_AT90USB1286_FAMILY ` doesn't work as expected.
7 years ago
134116b874
Merge pull request #7153 from thinkyhead/bf_czech_update
...
Updated Czech language
8 years ago
e80958b631
CZ Translate BLTouch and UBL
...
Fixup length
8 years ago
fe7e890b09
Fix issues with ADC_KEYPAD
...
Fixes #7150
8 years ago
a1632cfa0a
Added option 'H' to G29 P4.
...
- Added `H` to set a nozzle height adjustment to surface of the bed.
- Updated G29 P4 comments to reflect changes.
8 years ago
e687782875
Merge pull request #7134 from thinkyhead/bf_skynet_a3_ready
...
Add Skynet/ANET A10 support
8 years ago
b3c36c98fd
Edit digipot currents via LCD, save to EEPROM
8 years ago
3c7bfe798d
Various cleanups ahead of digipot save
8 years ago
9651d01e1a
Add Skynet/ANET A10 support
8 years ago
eb314373bb
Config spacing & consistency, group custom LCDs
8 years ago
6c45fa7dcc
Apply #elif in LCD conditionals
8 years ago
afbc6e3e2f
Update DELTA/SCARA config comments
8 years ago
1e47c17b46
Fix: set digipot mcp4018 Vrefmax to 1.666V
8 years ago
80a232419d
CNC workspace planes and 'P' argument for G2/G3
8 years ago
5fb0d401eb
Formatting tweaks
8 years ago
ed04d0b6be
Label DualXMode enums
8 years ago
786cdea124
Ensure REPRAPWORLD_KEYPAD_MOVE_STEP is defined
8 years ago
ee7163fd3a
Fix pinsDebug compile errors
8 years ago
a9f8e518bf
Fix FILAMENT_WIDTH_SENSOR infinite loop issue
...
Addressing #6992 and #5851
8 years ago
254a11b083
Merge pull request #7120 from thinkyhead/bf_sainsmart_link
...
Add link to F. Malpartida LiquidCrystal library
8 years ago
aeb6d465a4
Merge pull request #7118 from thinkyhead/bf_french_update
...
French update
8 years ago
325f09ea6c
Add link to custom LiquidCrystal library by F. Malpartida
8 years ago
d26c8cc5c8
fix_planner_refresh_e_positioning ( #7103 )
...
* fix_planner_refresh_e_positioning
* Fix
8 years ago
c7f04fbcc7
French translation
8 years ago
4171520729
added missing italian translation
8 years ago
41bfff14e2
Merge pull request #6991 from Bob-the-Kuhn/Mesh-with-babystepping
...
Mesh with BABYSTEP_ZPROBE_OFFSET: add sanity check
8 years ago
424d0bae8b
Merge pull request #7100 from thinkyhead/bf_HAL_prepare
...
Apply maths macros and type changes ahead of HAL
8 years ago
5c59ee4e93
Use current (raw) Z if omitted from G29 WXY or G29 WIJ.
8 years ago
37bc0fce62
Make G29 compatible with M206 Z and G92 Z
...
Use the raw position for mesh measurement. Otherwise the `M206` and
`M92` Z offsets will get canceled out by bed leveling. The downside is
`G29` will not compensate for a poorly set small `M206` fudge value.
To elaborate on this issue, imagine you are probing with a Z home
offset of -0.1, meaning when Z homes, -0.1 is the current position,
implying the ideal bed zero for the nozzle is 0.1mm higher than the Z
endstop. Ordinarily when printing, Z would raise 0.1mm higher.
What happens when we probe is that all points are measured with that
-0.1 included. So when bed leveling is enabled the `M206 Z` offset gets
exactly canceled out by the bed readings.
8 years ago
6c45d0fd81
Apply maths macros and type changes ahead of HAL
8 years ago
8a51e2960c
Improve the experience of editing steps_per_mm
8 years ago
725d9d9a56
Fix and improve LCD value editing display
...
- Fix: When "100.0" changes to "99.0" the LCD shows "199.0"
- Use 2 rows if needed on character LCD, (allowing longer labels…
Germany, et. al.)
- Known issue: A certain length label combined with a certain value
drawing function could, for example, display 99.0 on 1 line, but 100.0
on two lines. Workaround would be to pass a nominal value size argument.
8 years ago
499bb85a95
Clean up, put ubl menu itemization closer at hand
8 years ago
90f5f82926
Step-by-Step Menu addition
8 years ago
0c616700f3
Merge pull request #7097 from thinkyhead/bf_dac_percents_fix
...
Convert DAC percent to uint8_t
8 years ago
6dcf42f1a7
Add Z Fade Height to M420 output if it is enabled ( #7042 )
...
* Add Z Fade Height to M420 Output
Echo the z-fade height when M420 is called, if it is enabled.
* Fix Whitespace
* Fix Compiler complaint
* Missing semi-colon
8 years ago
a1c65fd3d5
convert DAC percent to uint8_t
...
=====================
add test to Travis
8 years ago
907cafcbfd
Support for two switching extruders
8 years ago
cfcd069501
Fix #5699 - LIN_ADVANCE freeze when ADV_RATE returns 0
8 years ago
b8b7ef1902
Merge pull request #7090 from thinkyhead/bf_italian_refix
...
Fix Italian language mapper
8 years ago
42f7f9e013
Merge pull request #7060 from bgort/i2cpefix
...
I2C Position Encoders Example Configs
8 years ago
0b49bddec2
Fix Italian language mapper
8 years ago
2e26a7c752
Added missing Italian translations
8 years ago
4c3dc8bf07
Remove set_current_to_destination from resume_print
...
Addressing #7057
8 years ago
4857a3ba48
Formatting and spelling
8 years ago
3d24c329af
M600 fixes
8 years ago
8fb30aaed6
warn user of an invalid combination
8 years ago
6cb9bb27fe
Move lcd_refresh_zprobe_zoffset definition
8 years ago
d4270f15a9
Spacing tweak in setup()
8 years ago
c61c0a9aeb
Fix status message missing "blink"
8 years ago
062131554f
Followup to #7045
8 years ago
3d043976f7
Add option to disallow filament change without homing first
8 years ago
93da4e83f7
One more space on a short status message
8 years ago
7c95f762f2
Show LCD bed options even without thermal protection
8 years ago
92eb55f246
Reject generous donation of trailing whitespace
8 years ago
428be27893
Formatting adjustments
8 years ago
8d5a37fb3d
Support for a 5th stepper in stepper code
8 years ago
7769a22064
Tweaks to temperature code
8 years ago
d9da126776
Cleanups for UBL / ultralcd.cpp
8 years ago
499d5c3b24
Fix scrolling lcd message for DOGM
8 years ago
7164fd499e
Tweak to G33 P error
8 years ago
c10d763d98
Simpler prepare move conditions
8 years ago
4ebff8eaa5
Drop fastio timer cruft
8 years ago
09bc34f4dc
Allow arbitrarily long retraction
8 years ago
4414825e0d
Merge pull request #7038 from thinkyhead/bf_PCA9632
...
PCA9632 PWM color LED support
8 years ago
9dda022705
fix compile errors
...
================================
Changed to conditional compile for AT90USB issue
8 years ago
b3338ccb01
Merge pull request #6954 from Bob-the-Kuhn/Software-SPI-for-all-CPUs
...
SD card soft SPI - allow all CPU families to use it
8 years ago
40bb0cbf7a
example configurations, etc.
8 years ago
26d20ebcfc
Don't allow filament change without homing first ( #7054 )
8 years ago
824f71d503
LCD Panel Interactive Mesh Editing ( #7045 )
...
Original Mesh Bed Leveling replacement put at top of UBL Menu Options to
help facilitate the removal of the Original Mesh Bed Leveling.
Radar display (and control) of the UBL Interactive Mesh Editing.
8 years ago
445227c807
Fix missing LCD_STR_REFRESH
8 years ago
699aa35df6
Code cleanup for G33
8 years ago
0bc66bf22c
PCA9632 PWM color LED support
...
Add support for the PCA9632 PWM color LED driver used on the Ultimaker 2 and Wanhao Duplicator 6.
8 years ago
896dfa0577
G33 eccentric probe fixes ( #6850 )
...
* excentric probe config fix
* undo last commit
* eccentric probe fix
* oops
* !stow after each probe
* deploy/stow fix
* E parameter + bit of cleanup
* comment
* LCD menu fix
8 years ago
e47029199e
Remove ADVANCED_PAUSE_FEATURE requirement for PROBING_HEATERS_OFF ( #7000 )
...
* Remove ADVANCED_PAUSE_FEATURE requirement for PROBING_HEATERS_OFF
* Add HEATER_IDLE_HANDLER conditional
8 years ago
8326c1c279
Merge pull request #7005 from Diederikvanderpant/bugfix-1.1.x
...
added shift register pins for reprapworld keypad v1.1
8 years ago
07f8da36d2
CL-260 configs
8 years ago
dce665a083
Merge pull request #7025 from magnuspub/patch-1
...
Mod in language_it.h
8 years ago
7b09ab6bda
Merge pull request #7033 from Bob-the-Kuhn/pinsDebug-&-dac_mcp4728-fixes
...
Fix pinsDebug problem & add capability to display more than 70 pins
8 years ago
5bdb4bbc5e
Merge pull request #7030 from thinkyhead/bf_circular_scroll
...
Circular scrolling of the status message
8 years ago
772275ab0c
Create language_it.h
8 years ago
11e28f389e
fix pinsDebug.h error, add capability to display more than 70 pins.
8 years ago
21217d53df
Circular scrolling of the status message
8 years ago
da8e946efb
Reduce size of heater state print code
8 years ago
dde8bb7c8b
Fix extrude_min_temp compiler warning
8 years ago
83263076dc
Merge pull request #7014 from fiveangle/fix_get-set_DrvPct_declarations
...
fix get/setDrvPct declarations
8 years ago
57a51fd5db
Tweak some else clauses
8 years ago
fc89de6d8b
Followup to German language update
8 years ago
92011e3d8c
Create language_it.h
8 years ago
7864b133a8
Fix get/setDrvPct declarations
8 years ago
0b6b7c9c7e
Merge pull request #7013 from thinkyhead/bf_german_update
...
Update language_de.h
8 years ago
f17a3c2474
Merge pull request #6889 from thinkyhead/bf_at90usb_mapping
...
Unify all AVR90USB pin mappings
8 years ago
5a72b6818e
update language_de.h
...
Following #6990 some more translations and some grammar fixes
8 years ago
4cc5444144
Merge pull request #7008 from Bob-the-Kuhn/Z_MIN_PROBE_ENDSTOP-and-Z_MAX_PIN
...
Can't use "#define Z_MIN_PROBE_PIN Z_MAX_PIN" in configuration.h
8 years ago
51bc50214a
Save 8 bytes of SRAM
8 years ago
748bf32388
Unify AVR90USB: pinsDebug changes
8 years ago
5426fc1735
Unify AVR90USB: Pins cleanup
8 years ago
87d8223251
Unify AVR90USB: Pins remap to Arduino
8 years ago
b378deaf89
Unify AVR90USB: fastio changes
8 years ago
e94f79ccea
Patch some serial macros
8 years ago
d91710e9aa
Followup for UBL translated strings
8 years ago
761df686bd
Minor cleanup in gcode.h
8 years ago
897bc2ac1f
Updates for ensure_safe_temperature ( #6963 )
...
* Updates for ensure_safe_temperature
* M600 fixes
8 years ago
1c107b3949
delete problem line
8 years ago
5b270417ed
added shift register pins for reprapworld keypad v1.1
...
I recently upgraded my Marlin to V1.1.x and decided to publish my fix to make marlin compile properly when #define board megatronics 2 in combination with #define reprapworld keypad v1.1. It was previously described in the comments of a closed pull request. MarlinFirmware#472. All the buttons on the keypad are now operational.
8 years ago
2f55870edb
[New Feature] I2C position encoder support ( #6946 )
...
* [New Feature] I2C position encoder support
I plan to continue improving/cleaning this up, as there areas that need work.
* let the cleanups begin.
* progress
* more progress
* comments, rename files, etc.
* clean
* Cleanups per thinkyhead
* a few more cleanups
* cleanups, bugfixes, etc.
* remove unnecessary passes_test(), additional cleanups/optimizations
* cleanups
* misc.
* Fix up I2CPEM.init() and a few other things.
* organize, fix, rename, etc.
* more optimization
* a few more tweaks
8 years ago
28d72f48f1
change to DWORD
8 years ago
8d1d9040b6
add static
8 years ago
a17ffe1ece
Merge pull request #6985 from Kaibob2/patch-1
...
Fix for #6980 (case_light compile problem when EXTENDED_CAPABILITIES_REPORT is enabled)
8 years ago
731c8e6372
Translatable Strings for ubl_G29 ( #6990 )
8 years ago
abb6b8ad54
update language_de.h ( #6986 )
...
There was quite a lot to translate this time. I'm not absolutely confident with the whole UBL stuff and it's a PITA to translate. I don't use any kind of levelling myself as i just have a perfectly level cast aluminium plate as bed.
So maybe someone who really uses it might take a closer look at it after it's merged.
8 years ago
c2eff60d3f
Fix for #6980
...
Line 7830 prevented successfull compilation when #define CASE_LIGHT_ENABLE is uncommented
8 years ago
1419126721
Merge pull request #6965 from thinkyhead/bf_save_more_sram
...
Use createChar_P to save SRAM in bootscreen
8 years ago
a453be7357
Merge pull request #6973 from bgort/autoreportT
...
Enable AUTO_REPORT_TEMPERATURES by default
8 years ago
1d615e0a67
Merge pull request #6976 from Tannoo/Leveling_in_About_Printer
...
Leveling type in About Printer
8 years ago
707707d71a
Fix LCD status message padding
8 years ago
e556ab1dff
Find three-point leveling points on Delta
8 years ago
a27b08e6af
Various code style tweaks
8 years ago
dac29e0f75
Cleaner failure of UBL without EEPROM
8 years ago
9128d9ab45
Improve sanity checks with static_assert, organize
8 years ago
6bb05c4543
Save 20b in smart_fill_mesh with PROGMEM
8 years ago
b7dc4d9973
Save 92b PROGMEM, 14b SRAM with extruder auto fan
8 years ago
c9e3caf928
Save lots of PROGMEM, ~20b SRAM with DIGIPOT_I2C
8 years ago
4134a6b526
Save 88b PROGMEM, 48 bytes SRAM in settings.reset
8 years ago
36cc03a9b4
Save 224b PROGMEM, 48b SRAM in get_homing_bump_feedrate
8 years ago
2a41f0ff84
Save 28b PROGMEM in ultralcd.cpp (line_to_current)
8 years ago
e6d10f6ddd
Spend 48b PROGMEM to save 16b SRAM
...
...by moving `homing_feedrate_mm_s` to PROGMEM.
8 years ago
97e13a30ba
Save over 100 bytes SRAM in pin_is_protected
8 years ago
45c74406cf
Recover 32 bytes of SRAM in Marlin bootscreen code
8 years ago
e1c5a43247
Cleanup stepper current control config options
8 years ago
efc198f952
Spacing, const, comments
8 years ago
4406fba994
Fixes #6975
8 years ago
d28f5d8a78
Fix: z_endstop_adj is never initialized
8 years ago
5d5ff36446
Fix a compile error with _lcd_set_z_fade_height
8 years ago
b88957e0d4
Leveling type in About Printer
...
Show the Leveling system in use on the About Printer screen.
8 years ago
dd071a4a65
Enable AUTO_REPORT_TEMPERATURES by default
8 years ago
8db1197c9b
Enable extended capabilities report by default ( #6969 )
...
Ref #5139
8 years ago
82e662fc69
Remove requirement for LCD when UBL is used. ( #6971 )
...
* Remove requirement for LCD when UBL is used.
* fix previous oversights
* further refinement - error messages for P2 & P4
* require R on G26 when not using LCD; default to all points
8 years ago
2c2b991b59
UBL Manual Build Menu Option ( #6972 )
...
One click option to manually build UBL mesh.
8 years ago
0dd0033b33
Save up to 94 bytes of RAM on 20x4 LCD Display machines ( #6964 )
...
* Save up to 94 bytes of RAM on 20x4 LCD Display machines
Moved the custom screen characters out of RAM into Program Memory. With
SD-Card support and the Progress Bar enabled, this saves 94 bytes of RAM
memory.
This was tested using the example_configurations/FolgerTech-i3-2020
files. So a couple small changes to those files snuck into this Pull
Request.
Probably... We can find similar savings in the Graphics LCD code it we
comb through it. And if so... That is the place we really need to
save RAM memory!
* Tidy up white space and indentation
8 years ago
ba0bd33c38
Removed check for 2560 family
8 years ago
04b07a6ecc
Unused var in Stepper
8 years ago
eb8af486d2
Ensure safe temperature for M600
8 years ago
bfe7fbe5c0
Maintain message scroll rate
8 years ago
6411d65c48
Fix Morgan SCARA S2 calculation
8 years ago
46752588b9
Merge pull request #6948 from Bob-the-Kuhn/redundant_temperature
...
fix redefinition errors for redundant_temperature
8 years ago
5938dae200
Merge pull request #6950 from MagoKimbra/fix_g29_3_point
...
Fix G29 with 3 point
8 years ago
c5e0f08e35
Merge pull request #6951 from fixoid/patch-4
...
Initializing extruder/nozzle servo when turning on the printer
8 years ago
e4937b0285
Cleanup of spacing and formatting
8 years ago
1aab9906e6
Initializing extruder/nozzle servo when when turning on the printer
8 years ago
663ff7f92a
Fix G29 with 3 point
8 years ago
9f295581f0
Ubl delta fixes and improvements ( #6941 )
...
* Change all direct changes of ubl.state.active to
set_bed_leveling_enabled() which handles apply/unapply
leveling to maintain current_position consistency.
Fix invalidation of UBL mesh to invalid unreachable
mesh points as well (delta corners).
Fix UBL_DELTA unapply_leveling logic and when
it gets applied, including fade_height changes.
Add optional M114 D for detailed position information,
disabled from compilation by default (M114_DETAIL).
* UBL_DELTA raw and inline kinematics
* UBL planner fall through fix
* consistent variable names
* Cleanup orphaned code and whitespace changes.
Use _O2.
* compile warnings cleanup
* Remove redundant #ifdef condition
8 years ago
c34d7a29a6
fix redefinition errors for redundant_temperature
...
Removing redundant_temperature from public section and leaving it in the
private section
8 years ago
6a5d3b580d
fix "hex_address not defined" when UBL is enabled
8 years ago
789b2928a8
Tweak scrolling message code
8 years ago
fc7d7f87b4
Init probe test pin with FastIO
8 years ago
0282452cea
Make Parser::seen volatile
8 years ago
9a305a467b
Patch LCD Contrast menu item
8 years ago
90ccac4bcf
Clean up after recent commits
8 years ago
2130f10de8
allow space between parameter and value
8 years ago
ebda4663c3
for discusion
8 years ago
911079104e
Support for ZRIB v2.0 Control Board
8 years ago
65a0212866
Easier override of FILWIDTH_PIN
8 years ago
147d9d76fc
Merge pull request #6928 from Bob-the-Kuhn/Fix-case-light-logic-on-Azteeg-X3-boards
...
Fix case light logic on Azteeg_X3 boards.
8 years ago
4288c4fb4f
Configurations for Malyan M150
8 years ago
1919cb0d1e
Config cleanups
8 years ago
9a9bbfc57c
Fix case light logic on Azteeg_X3 boards.
8 years ago
a32f7b329c
Fix heater status display for advanced pause
8 years ago
445865ea03
REPRAPWORLD_KEYPAD is NEWPANEL but not ULTIPANEL
8 years ago
4296a8b74e
For status scrolling, pad a short message
8 years ago
4a96433b7e
Simplify counting of printable characters
8 years ago
8d69394ae1
Fix LCD printing of progmem strings
8 years ago
c74d4dede6
Prevent illegal leveling combinations
...
Addressing issue #6901
8 years ago
155aa62fb0
Merge pull request #6912 from thinkyhead/bf_better_pulse_delay
...
Account for dual XYZ in pulse delay cycles estimate
8 years ago
a5fa586642
Preferred patch to gcode.h
8 years ago
1b41e1f645
another compile error
...
only seen if
#if ENABLED(TEMPERATURE_UNITS_SUPPORT)
...
#if
ENABLED(ULTIPANEL) && DISABLED(DISABLE_M503)
8 years ago
65bd4c8c94
Merge pull request #6797 from Bob-the-Kuhn/M355-case-lightimprovements-(1.1.x)
...
M355 case light improvements (replaces PR #5685 )
8 years ago
9657e7d3ee
copied file changes from PR #5685
...
==============================
Configuration_adv.h changes
==============================
add "live" LCD update
==============================
P & S version
==============================
final (hopefully) tested version
==============================
update M115 capabilities print
==============================
Menu changes portion of the requested changes
==============================
changed USEABLE_HARDWARE_PWM from a function to a series of macros
==============================
changes per review
8 years ago
8206bb9bb9
fix compile error
...
invalid conversion from 'const char*' to 'char*' [-fpermissive]
8 years ago
df91346188
Account for dual XYZ in pulse delay cycles estimate
8 years ago
7236109f2a
Patch M24 / M125 for delta
8 years ago
be17033762
Fix case light menu toggle
8 years ago
89b93058e3
Merge pull request #6887 from christianh17/PR-sanitycheck
...
enable DEACTIVATE_SERVOS_AFTER_MOVE with switching nozzle
8 years ago
05b66234ae
Merge pull request #6895 from thinkyhead/bf_user_commands
...
Custom user commands menu
8 years ago
84a0a77c59
Merge pull request #6852 from tcm0116/mixing_extruder_lin_advance
...
Generate error if MIXING_EXTRUDER and LIN_ADVANCE are both enabled
8 years ago
266ae8912a
Formatting in _draw_heater_status
8 years ago
6b9ca16f36
Patch lcd_print edge limit code
8 years ago
74d6dee920
User Command (Script) Menu
...
The menu (commands / scripts) is configurable in `Configuration_adv.h`.
- Added conditionals.
- Changed script handling.
- Slimmed and working!
- Added Status message.
- Returning to lcd status screen now!
- Example Configs Updated.
- Cleanups by @thinkyhead
8 years ago
d9c8072037
Edit PROPORTIONAL_FONT_RATIO comment
8 years ago
46b32e4548
Cleanup LCD interface, add lcd_reset_status
8 years ago
ca99d67ede
Fix UBL "Info screen" menu items
8 years ago
2c7a39bc0e
Fix LCD print aborted message
8 years ago
0f1e8c195d
Draw on LCD after value has changed
8 years ago
51587c4b43
Rename Feedrate to Velocity to match prior naming
8 years ago
9677f3f2f5
Patch up LCD Bed Leveling menu
8 years ago
fc2eaab7f3
Show home option in level bed menu
8 years ago
c6a7adc293
Patch G29 A and Q arguments to bypass setup
8 years ago
4cece2d72e
Use NAN for G29 W omitted parameters
8 years ago
2d71569138
Fix spacing in JSON output
8 years ago
b2d3c8aedd
Have G28 do a refresh of the display
8 years ago
50ab9c2e04
General cleanup of spacing, comments
8 years ago
f1e33afda4
Return to Bed Leveling menu when done
8 years ago
78d8c598e1
Fix lcd_synchronize with message
8 years ago
eb39d6e3e2
Don't draw progress bar until it has 1%
8 years ago
194f8b2f55
Start at Z=0 in manual probing
8 years ago
6f89db11f0
Allow lcd_setstatusPGM to reset the alert level
8 years ago
3fe333143c
Case light as a toggle menu item
8 years ago
d013bddfa8
Merge pull request #6876 from thinkyhead/bf_extend_leveling_menu
...
Extend the ABL/MBL Bed Leveling menu
8 years ago
01e7e234c6
Add more options to the Bed Leveling menu
8 years ago
0cbe448edf
Split up Control > Motion submenu
8 years ago
a3645ec921
Reference op with variable name
8 years ago
71367fd518
Scrolling status message option
8 years ago
b0eae68f57
Prevent bed temperature being set too high
8 years ago
493f0b0c62
Fix some compiler warnings
8 years ago
f379a326cc
enable DEACTIVATE_SERVOS_AFTER_MOVE with switching nozzle
...
When using switching nozzle it should be possible to disable the servo after move. Do it only if you do not need the servo power to keep the position.
8 years ago
33279a1e02
Code style tweak to gcode.h
8 years ago
ac959b12ee
Updates to language_es.h based on latest updates. ( #6871 )
...
Spanish language updates
8 years ago
55c700d537
Tweak to gcode.h
8 years ago
868e7db4ae
value check was looking at the code
8 years ago
fb5e0ffe16
Unify M600 and M125 pause features ( #6407 )
...
* Unify M600 and M125 pause features
* Cleanup per thinkyhead's comments
* Rename filament_change_menu_response to advanced_pause_menu_response
* Include HAS_BED_PROBE in QUIET_PROBING
* Update gMax example file
* is_idle() is out of scope without the braces
* Convert FT-i3-2020 to Advance Pause names...
* Allow pause even if not printing
8 years ago
b3a97b5013
Patch up LCD level bed menus
8 years ago
78af2b1444
Fix PROBE_MANUALLY via G-code
8 years ago
082da23391
One fewer EOL in M503 output
8 years ago
b15e531464
Fix screen change on character display
8 years ago
44e657766e
Add incompatibility error to Sanity Check for MIXING_EXTRUDER and LIN_ADVANCE
8 years ago
735405b2a4
Merge pull request #6848 from thinkyhead/bf_scara_M665
...
Add M665 for SCARA
8 years ago
ffa901f373
Merge pull request #6839 from thinkyhead/bf_day_ending_in_y
...
UBL ultralcd.cpp patches
8 years ago
361cbba113
Use M665 to set SCARA angle offsets
8 years ago
5ed63a5724
Apply const in prepare_kinematic_move_to
8 years ago
5cbe0244c5
Fixes for spindle/laser and SCARA probe bounds
8 years ago
1f52c9f5df
Neater Megatronics 3 pins
8 years ago
af81cb4cbb
Patch for M503 output
8 years ago
1d167a6874
Some cleanup, fixes for ultralcd.cpp UBL code
...
- Free up 30 bytes of SRAM in UBL LCD code
- Fix BUILD_ABS_MESH temperature
- Fix UBL indentation in ultralcd.cpp
- UBL vars lowercase, "convert to positive" sensibly
8 years ago
f4028fe088
New GCode Parser - Implementation
8 years ago
002a06c507
New GCode Parser - Configuration
8 years ago
ad915b667e
One more mesh_index_to_npos update
...
Followup to #6827
8 years ago
2881f0a48d
Fix, extend G42 with P (probe) parameter
...
- Also fix handling of SCARA and misuse of `codenum`.
8 years ago
d252d1b6a2
Merge pull request #6831 from thinkyhead/bf_move_g7
...
Move G7 to G42
8 years ago
82ca6248e2
Move G7 to G42
...
See: #6777
8 years ago
26ffa558a3
Use redraw flag for both types of LCD
8 years ago
3ff7515527
Merge pull request #6817 from cbusillo/patch-1
...
missing enable for M605 for duplication mode
8 years ago
34cfbc90cd
Use new attribute macros in more places
8 years ago
85b967657e
Embed G26/G29 in ubl class, with enhancements
8 years ago
c99bd69889
Apply const float & more
8 years ago
ad5638f78c
Cleanup some fastio code
8 years ago
e271521c39
Single user_canceled function in G26
8 years ago
c2ea22da49
Clean up whitespace
8 years ago
ceb62fc7e1
Fixes #6828 : M428 bug
8 years ago
48f7652143
UBL G29 -P3.1 smart fill ( #6823 )
...
* UBL G29 -P3.1 mesh fill with distance-weighted least squares fit.
* Back to original -O0 on G29 for now.
8 years ago
850203fb3a
Merge pull request #6816 from thinkyhead/bf_lcd_live_editing
...
Constrain LCD status message rendering
8 years ago
3129260c44
Misc. Clean Up ( #6822 )
...
* Misc. Clean Up
Mostly UBL related clean up.
- But fixed a bug in the thermistortables.
- Made G26 more responsive to user aborts.
- Added sanity checks for older name for UBL_MESH_VALIDATION.
- Made G29 P4 able to edit invalidated mesh points
- Restore a reasonable Fade Height for UBL when creating new state information
- Get UBL's Topology Map to look a little bit better
- Make sure the user doesn't see a blank screen when doing Mesh Editing.
* Huh??? GitHub Desktop screwed up!
* get the planner object in scope
* Fix out of scope z_fade_height
* Travis timed out...
I need a change so I can force a new commit and sync.
8 years ago
3b4116e73b
missing enable for M605 for duplication mode
...
I believe gcode_M605 will not be called when using DUAL_NOZZLE_DUPLICATION_MODE without this change.
8 years ago
5e8892d6b5
Show Restore Failsafe item with EEPROM off
8 years ago
76af9ac7c5
tweaks
8 years ago
ba5910ab6c
Constrain LCD status message rendering
8 years ago
2c309a8f7c
Fix set_lcd_contrast
8 years ago
22dbb2117c
Merge pull request #6812 from thinkyhead/bf_day_ending_in_y
...
Cleanup code, organize & document fastio pin mappings
8 years ago
364f8fb613
Update Configuration.h files to better names ( #6814 )
...
Changed UBL_G26_MESH_EDITING to UBL_G26_MESH_VALIDATION
Added UBL_MESH_EDIT_MOVES_Z to prepare for that change (coming next)
8 years ago
d7fda2fe49
Formatting, const in G33
8 years ago
1519b0e7c1
Split up fastio.h, document pin mappings
8 years ago
49599caade
General cleanup to utf_mapper.h
8 years ago
02f15f6775
UBL-related cleanup, spacing, standards
...
Reference: #6804
8 years ago
52e20aeab3
Pins-related cleanup, formatting
8 years ago
ea906e4da7
Merge pull request #6810 from thinkyhead/bf_lcd_live_editing
...
Add "live editing" option to LCD menus
8 years ago
11fc9564c9
Add live editing option to LCD menu
8 years ago
8a0a5cfccc
Temp-related cosmetic changes
8 years ago
b29dbbd5e4
Use uint16_t for temps
8 years ago
ebcd1aaf88
Access hotend/bed temperatures as float
8 years ago
6ce2b1ff4a
G33 evolutionary changes
8 years ago
3c061a9f9a
UBL tabs, whitespace, spelling, etc.
8 years ago
75badae2f8
Disable PROBE_MANUALLY for UBL
...
Plus some other UBL tweaks.
8 years ago
94a4af1d7f
Merge pull request #6773 from thinkyhead/bf_lcd_patch_e5
...
Patch LCD code for 5th extruder
8 years ago
01f452c37c
Tweak Azteeg X3 PRO _pins.h so Viki2 will work for those without a case light.
...
- add comment explaining that the Panucatt Viki2 wiring diagram uses pin 44
8 years ago
e09b4ce4a5
Add checking
8 years ago
13599a73c7
Add `G7` gcode command to move between UBL mesh points
...
- can be augmented in the future to enable for other leveling systems
Quite simple, but did not want to modify `G1` as the additional checking would slow it down.
Tested & working.
8 years ago
43c24f0027
Fix recent regressions, &c.
...
- fix broken `M421` due to less-than-careful optimization
- add HOME_AFTER_DEACTIVATE define to advanced config so not everyone has to rehome after steppers are deactivated
- misc. cleanups (remove unused label, unused variables)
8 years ago
3843a5151a
Patch LCD code for 5th extruder, EEPROM reset
8 years ago
6c064bb7d6
Some probe_pt error-handling
8 years ago
3370329751
Fix broken EEPROM save/load
8 years ago
f0fe26c411
Ensure Arduino.h and configs are included for serial.cpp
8 years ago
ffb5353294
Merge pull request #6738 from thinkyhead/bf_config_crc_rebase
...
Implement CRC16, develop mesh allocation table
8 years ago
e806e6419a
Merge pull request #6768 from thinkyhead/rc_spindle_m3_m5
...
Spindle / Laser support
8 years ago
d6f49c6626
Merge pull request #6752 from jdelahayes/bugfix-1.1.x
...
Update french language
8 years ago
55a87da036
SPINDLE/LASER implementation
8 years ago
ffe0e2d19a
SPINDLE/LASER pins changes
8 years ago
99c4900a98
SPINDLE/LASER config changes
8 years ago
a3abfeac47
Mark strings needing translation
8 years ago
7f4e4b1212
UBL name/state methods
8 years ago
7852369987
Implement CRC16, develop mesh allocation table
...
- Add crc16 utility function
- Implement CRC16 for config store, remove old checksum, increment layout version
- Move UBL mesh store/load to MarlinSettings; increment UBL_VERSION
- Begin to lay out MAT structure, prototype functions, etc.
- Rename ubl.state.eeprom_storage_slot to .storage_slot
- Misc. optimization
- Cleanup/standardize/improve some messages
This is a work in progress!
8 years ago
00d358d92d
Fix a PROBE_MANUALLY bug in ultralcd.cpp
8 years ago
c2321b1cdd
Separate SWITCHING_NOZZLE and SWITCHING_EXTRUDER
8 years ago
238fb53617
Patch home_all_axes to ignore G28 XYZ parameters
8 years ago
6b6630e11b
Clean up trailing whitespace and tabs
8 years ago
d30e478f97
Fix incorrectly optimized find_closest_mesh_point_of_type() function ( #6761 )
8 years ago
5a9e52a3e0
Use COPY_XYZE macro to copy exactly 4 elements ( #6758 )
...
Fix undefined DELTA_PROBEABLE_RADIUS for UBL_DELTA
8 years ago
8606644343
M48 Fix for Delta Configuration Files & UBL G29 only homes when necessary ( #6757 )
...
* Fix M48 for Delta's There was a scope issue: DELTA_PROBEABLE_RADIUS wasn't getting defined.
* Check if the specified G29 command requires homing
8 years ago
0cd398c25d
UBL Menu Updates ( #6751 )
...
Things should be pretty stable for a while.
But it wouldn't surprise me if the Delta people have a need for a few special commands.
8 years ago
a5737cba7c
Update french language
8 years ago
0fef9a2983
Remove "ubl." prefix from calls within ubl method
8 years ago
14a4257c7b
UBL tabs, whitespace, spelling, etc.
8 years ago
56e2e331ed
UBL G29: replace 'O' with 'T'
...
Since we already used 'T' for `G29` Topology Report in the past, and since 'T' is available…
8 years ago
091f94a6bf
Fix up M421 and some comments
8 years ago
4ec4ecff1a
Reduce find_closest_mesh_point_of_type a little
8 years ago
f1a1c6873e
Patch lcd_implementation_status_screen compiler warning
8 years ago
2266c0780d
fixed spanish lang
...
It was missing MSG_FILAMENT_CHANGE_HEAT_2 and MSG_FILAMENT_CHANGE_HEATING_2
8 years ago
b213a45efb
UBL_DELTA post merge cleanup ( #6705 )
...
* UBL_DELTA post merge cleanup:
fix fade_height, lost during some previous merge
fix float cx,cy which are not const
move repeated z_cxcy calc line inside loop
style fixes and comment fixes/alignment
* Update ubl_motion.cpp
remove unnecessary parentheses
* Update Conditionals_post.h
Change name of define to more accurate meaning:
UBL_GRANULAR_SEGMENTATION_FOR_CARTESIAN
which is not and should not be the default for cartesians with UBL.
8 years ago
6f86c46fa6
Fix typo that caused scope issues for DELTA ( #6750 )
8 years ago
1fbcbc05f6
UBL no longer flout's the sacred GCode standard ( #6745 )
...
Also clean up ubl_motion.cpp debug info and fix declaration of cx & cy
8 years ago
c262ea92e0
Merge pull request #6733 from abusca/Euskera
...
Updated Basque translation
8 years ago
267f77b18b
More constraint on axis_unhomed_error
8 years ago
645096b87a
Updated Basque translation
...
Updated Basque translation with new strings.
8 years ago
40d95a4e23
Update the gMax files to display better with Proportional Fonts ( #6727 )
...
Update the gMax files to display better with Proportional Fonts
8 years ago
c06af63f87
G26's default behaviour ought to be the entire mesh ( #6726 )
...
Adding the capability to specify ahead of time how much of the validation pattern to print made it so by default G26 only did one circle and no connecting lines.
It is more natural for the unsophisticated user to just do the entire mesh (bed). We default the repetition count to GRID_MAX_POINTS+1 to insure we get every last one of them!
8 years ago
15040821e0
Setup FolgerTech-i3-2020 files better for the user ( #6724 )
...
UltiPanel was enabled, but technically, it is a REPRAP_DISCOUNT_SMART_CONTROLLER
Either configuration works on the machine. But we want it 'Right'.
Setup the Proportional Font spacing so columns line up nicer on PronterFace and Repetier Host.
8 years ago
67c9b1e332
Update M665 comment, fix M665 code_value code.
8 years ago
37399e3cb5
Fix prepare_move_to_destination_cartesian for UBL
8 years ago
a7fb55ea6d
Use GRID_MAX_POINTS. Some formatting
8 years ago
e51b5774db
Merge pull request #6699 from mtowara/patch-1
...
Bugfix PRINTER_EVENT_LEDS
8 years ago
056350d9bf
Merge pull request #6656 from FHeilmann/fix_fwretract_pos_z_move
...
Fix FWRetract with positive z-moves during retracted state
8 years ago
0e582bcfb7
Fix #6691 - redundant line in M665
8 years ago
68ae7c8d7a
Bugfix PRINTER_EVENT_LEDS
...
Extra closing curly bracket terminates while loop early if PRINTER_EVENT_LEDS defined
8 years ago
ba29da56e0
Add disclaimer for verboten parameters
8 years ago
0696dda470
Cleanups to UBL_DELTA
8 years ago
cbfca29522
M421 tweaks, just to use const
8 years ago
233f824dd6
Define GRID_MAX_POINTS
8 years ago
b17e2d3dcd
Apply const in Marlin_main.cpp
8 years ago
92fbea2906
Add some GCodes to the header of Marlin_main.cpp
8 years ago
94e90ca26c
Tweak M80/M81 descriptions
8 years ago
ee50dfaaf3
Adjust G26 arguments
8 years ago
b0ba5cae73
Fix a spelling boo
8 years ago
91841d75c9
UBL_DELTA ( #6695 )
...
UBL on Delta's.... Should be close! Should not affect any Cartesian printer.
8 years ago
445003dbb8
Merge pull request #6694 from bgort/g29p2b
...
UBL: Minor improvement to G29 P2
8 years ago
5a5dba6fc8
UBL: Minor improvement to G29 P2
...
- allow H code value to override probing height
- minor cleanups
8 years ago
ae676490c9
M421: Add 'adjust closest point' capability
...
- Split M421 into separate versions for bilinear and ubl
- Fix minor issue in G26
8 years ago
9a688d1456
Merge pull request #6682 from thinkyhead/bf_M80_s_arg
...
"M80 S" to report the state of the PSU pin
8 years ago
b63e82f309
M421 Mesh Point Offset and misc. UBL clean up ( #6685 )
...
* M421 Mesh Point Offset and misc. UBL clean up
Allow M421 to accept an offset as well as absolute value for a specified
mesh point.
And misc. UBL clean up to reduce redundent code.
* Better error checking for M421
* Fix M421 Y index bug
I just noticed.... We've had a Y index bug for who knows how long?
8 years ago
539e0c2f31
"M80 S" to report the state of the PSU pin
8 years ago
df42428281
Merge pull request #6665 from bgort/font
...
Add proportional font adjustment ratio
8 years ago
2604742191
Add proportional font adjustment ratio
...
- update example configs
8 years ago
b3407a371b
Merge pull request #6676 from bgort/g26zhop
...
G26: Add 0.5mm Z-bump between circles to minimize pattern scraping
8 years ago
c33d99c5b2
Merge pull request #6680 from bgort/g26repeat
...
G26: Add 'Repeat' Option
8 years ago
7325035aac
Merge pull request #6637 from Tannoo/UBL_Menu_System_1.1
...
UBL Menu System 1.1
8 years ago
f7a201b0d0
G26: Add 'Repeat' Option
...
- Allows for specifying number of points to print/validate, using 'R' code like with G29 P4 Rx
- Moved the code for Random to 'M' so we could be consistent with G29 P4
- G26 instructions indenting/cleanup
8 years ago
9c5957fc77
G26: Add 0.5mm Z-bump between circles to minimize pattern scraping
8 years ago
4da14b14f4
UBL Cleanup/Bugfix
...
- Fix bug in ubl_line_to_destination
- Improve/fix output of some ubl.h functions
8 years ago
66db6c3acc
UBL Menu System 1.1
...
/**
* UBL System submenu
*
* Prepare
* - Unified Bed Leveling
* - Activate UBL
* - Deactivate UBL
* - Mesh Storage
* Memory Slot:
* Load Bed Mesh
* Save Bed Mesh
* - Output Map
* Map Type:
* Output Bed Mesh Host / Output Bed Mesh CSV
* - UBL Tools
* - Build Mesh
* Build PLA Mesh
* Build ABS Mesh
* - Build Custom Mesh
* Hotend Temp:
* Bed Temp:
* Build Custom Mesh
* Info Screen
* - Build Cold Mesh
* - Fill-in Mesh
* Fill-in Mesh
* Smart Fill-in
* Manual Fill-in
* Info Screen
* Continue Bed Mesh
* Invalidate All
* Invalidate Closest
* - Validate Mesh
* PLA Mesh Validation
* ABS Mesh Validation
* - Custom Mesh Validation
* Hotend Temp:
* Bed Temp:
* Validate Mesh
* Info Screen
* - Edit Mesh
* Fine Tune All
* Fine Tune Closest
* - Adjust Mesh Height
* Height Amount:
* Adjust Mesh Height
* Info Screen
* - Mesh Leveling
* 3-Point Mesh Leveling
* - Grid Mesh Leveling
* Side points:
* Level Mesh
* Info Screen
* - Output UBL Info
*/
8 years ago
3b0127cf8e
Fix compiler complaint related to M100
8 years ago
11104f177b
Apply const in BABYSTEPPING
8 years ago
081bf1f879
Patch #else / #endif comments
8 years ago
a9487c9443
Reduce redundancy in BLTOUCH conditionals
8 years ago
8d961b51cc
Eliminate M100 compiler warnings?
8 years ago
efb9ce24d9
Merge pull request #6645 from tcm0116/bltouch_config
...
Automatically define Z_MIN_PROBE_ENDSTOP_INVERTING for BLTouch
8 years ago
e2f07917ab
Merge pull request #6644 from tcm0116/bltouch_menu
...
Move BLTouch LCD menu from Main to Main/Control
8 years ago
fe96376a73
Fix FWRetract with positive z-moves during retracted state
8 years ago
47cae2929f
Patch platformio.ini to fix build error in DevIoT
...
For compatibility with DevIoT, until that can be solved.
8 years ago
911a87e006
Disable SCARA feedrate scaling by default
8 years ago
71396f77d3
Cleanups following recent commits
8 years ago
dca48f0e63
Move platformio.ini back to Marlin folder - it works there
8 years ago
a6dafb058e
Small reduction in error code size
8 years ago
a1e04942a2
Cleanup to software PWM variables
8 years ago
a20d0794e6
Automatically define Z_MIN_PROBE_ENDSTOP_INVERTING for BLTouch
8 years ago
3279337f47
Move BLTouch LCD menu from Main to Main/Control
8 years ago
6cb0fa4128
Cleanup previous implementation of new quiet probing
...
Saves a few lines of code.
8 years ago
4b7f8ad9c6
Merge pull request #6610 from bgort/pio-improvements2
...
PlatformIO-related changes
8 years ago
56ca47ab9d
Patch configuration temp units
8 years ago
421dd62800
Adjust spacing of "spaces"
8 years ago
26dba44cd3
Patch redundant lcd settings
8 years ago
34b5041576
Spacing adjustment, ubl_G29
8 years ago
1c4ed8b106
Note 5 extruders in config comments
8 years ago
6e4a5cc8c6
Patch missing const in temp_abs
8 years ago
d35e2fda10
Merge pull request #6622 from bgort/silentprobing
...
Improve BLTOUCH_HEATERS_OFF functionality
8 years ago
6ed52fb765
Adjust spacing in LSF
8 years ago
110afff415
More misc UBL fixes and update gMax examples ( #6632 )
...
I think I forgot to Sync before I committed last time. Some UBL
changes did not stick.
Also, update the gMax configuaration.h file so other than unique numbers
and settings, it exactly matches the default configuration.h file.
8 years ago
d92fa40c62
misc. UBL fixes ( #6631 )
...
* Restore LSF functionality
Some of the typo's persisted... Hopefully this gets them all fixed.
* Restore user's expectations of how G28 should behave
* Allow Nozzle size control with ornery host programs
8 years ago
faa270071d
Improve BLTOUCH_HEATERS_OFF functionality
...
- rename to PROBING_HEATERS_OFF
- move heater pausing functionality into thermalManager
- add variables, pause(), ispaused(), other functions
- add fan pausing functionality -> PROBING_FANS_OFF
- add probing_pause() wrapper
- move pausing into do_homing_move() and do_probe_move() to minimize quiet time and so other probe types can benefit
- example configs
8 years ago
d66e9efac5
G29 P1 stops reporting Invalid location with this patch
8 years ago
ce507deb9f
Support temperature units in M503
8 years ago
a59066bca9
Various improvements - mostly UBL-related ( #6607 )
...
UBL Clean up.
8 years ago
0446dd3ad8
PlatformIO-related changes
...
- move platformio.ini out of source directory to be more consistent with 'normal' PlatformIO usage
- facilitates IDE integration
- add related .gitignores
8 years ago
77769e284f
Edit configuration comments
8 years ago
6876e79d42
Tweak command index increment
8 years ago
7fcb5c1424
Minor fix in K8200 readme
8 years ago
267f3a03d9
Fixed USE_CONTROLLER_FAN #define usage
8 years ago
ae7c602031
fix error in M105 output -- use SERIAL_PROTOCOL for ints instead of SERIAL_PROTOCOL_F ( #6584 )
...
also removed wayward 'address of' ampersand in setTargetHotend and setTargetBed parameters
8 years ago
3cd9af2409
bugfix-1.1.x ReadMe, Version, helper scripts
8 years ago
15268770f5
Fix broken fwretract recovery extruder feedrate
...
When both lowering and recovery are performed using the same "prepare_move_to_destination()" the extruder recovery feedrate ends up being ignored and, instead, is only capped by either the maximum e-speed or the time it takes to perform the z-lowering.
Performing the two moves separately from each other ensures a correct recovery feedrate.
8 years ago
58210c3a19
Merge pull request #6568 from thinkyhead/rc_bilinear_extension
...
Add EXTRAPOLATE_BEYOND_GRID option to bilinear leveling
8 years ago
da08e11acd
Add EXTRAPOLATE_BEYOND_GRID option to bilinear leveling
8 years ago
6834e36871
Merge pull request #6567 from thinkyhead/rc_sdcard_stop
...
Shutdown heaters, autotemp on SD Cancel
8 years ago
399efd66ed
Click to resume
8 years ago
1196e3ca59
SDCard print completion can use "M0"
8 years ago
6854f08d22
Shut down autotemp in disable_all_heaters
8 years ago
acec237092
Shutdown heaters and fan after canceling a print from the SD card
8 years ago
11b6a3cbb6
Fix regression in least_squares_fit.cpp
8 years ago
e1b85ff67b
Merge pull request #6559 from thinkyhead/rc_more_optimal
...
Compact smart_fill_mesh slightly
8 years ago
9890141f7b
M100 tweak
8 years ago
2658cc707a
Treat temperature as integer, when possible
8 years ago
1b2c7ec20a
Make G26 compatible with inches and thermal unit modes
8 years ago
241bdffe65
Dress up Bilinear Leveling code
8 years ago
67ecf06cc4
Patch issue in gcode_M900
...
Noted in #6550
8 years ago
de5e485ed7
Explicit upward angle solution
8 years ago
ecdf68735f
Compact smart_fill_mesh slightly
8 years ago
628391304f
Merge pull request #6552 from thinkyhead/rc_more_ubl_cleanup
...
Further cleanup of UBL
8 years ago
902fe76db9
Merge pull request #6556 from thinkyhead/rc_use_controller_fan
...
Implement USE_CONTROLLER_FAN as a feature
8 years ago
7ba7474a73
Drop extra parens from address-of operator
8 years ago
0bf5add075
Use UBL_MESH_(MIN|MAX)_[XY] for G29 move limits
8 years ago
b8ba3b7647
Use 'sq' macro where possible
8 years ago
66eba3346b
Remove G29 lcd control debugging
8 years ago
3517154135
Reduce code size, fix bug in smart_fill_mesh
8 years ago
c4e34adcf1
Apply formatting, coding standards to UBL
8 years ago
f4239e62b1
Merge pull request #6557 from thinkyhead/rc_hotend_status_item
...
Keep refreshing LCD if hotend status is on-screen
8 years ago
fc857c5b78
Merge pull request #6549 from thinkyhead/rc_bltouch_refix
...
Fix BLTOUCH_HEATERS_OFF bug
8 years ago
b39f634252
Continuously update LCD when hotend status is displayed in Filament Change screens
8 years ago
2c13922c46
Implement USE_CONTROLLER_FAN as a feature
8 years ago
492bc536bf
Modify debug methods to take PSTR
8 years ago
e5a27d9f36
G29 P2 & P4 bug fixes & improvements
8 years ago
b93be716cf
Remove trailing whitespace
8 years ago
76eca9732d
Fix mis-named language string define in Dutch
8 years ago
806f670092
Merge pull request #6511 from Bob-the-Kuhn/UBL--G26-minor-improvements
...
UBL: G26 minor improvements
8 years ago
0803c9d997
Merge pull request #6533 from thinkyhead/rc_autocal_patches
...
General cleanup of G33
8 years ago
ff5fed137f
Fix BLTOUCH_HEATERS_OFF bug
8 years ago
ca1dd739a3
Organize ubl.h defines by the files they serve
8 years ago
0449f69179
Cleanup patch to recent merge
8 years ago
da2abad636
Various cleanups of G33
...
- update comment section
- redefined P5 grid
- minor clean to probe radius routine
- updated EEPROM version to V37 according remark in #6517
8 years ago
7ce613db0a
Fix Conditionals test for endstop plug used by Z2 or probe.
8 years ago
ef750ae86b
Towards supporting Z2 in Endstops::report_state
8 years ago
c03c623951
Sanity-check Z2 endstop assigned to a nonexistent pin.
8 years ago
70f31b6c76
Throw an error if no E stepper is free for X2, Y2, Z2
8 years ago
ac69eca586
Merge pull request #6538 from bgort/ubl_gridlbls
...
Fix, cleanup, prettify `G29 O` output
8 years ago
99b11db1a1
Merge pull request #6537 from thinkyhead/rc_cleanup_sunday
...
Various leveling-related patches
8 years ago
41e63bbb7c
Fix Horizontal and Vertical UBL optimization bug. ( #6540 )
...
* Fix Horizontal and Vertical optimization bug.
And drastically reduce the debug code foot print....
* Yeah Baby!
The debug print is going A - OK !
8 years ago
e79b335367
Patches for leveling reactivation in G28 / M48
8 years ago
92e22c3bf2
Fix, cleanup, prettify `G29 O` output
8 years ago
7d5cd7e0d7
Tweak set_bed_leveling_enabled
8 years ago
ed81e9b3d3
Adjust leveling conditionals
8 years ago
a64e5659ce
Clean up G26 external references, private vars
8 years ago
2887c20788
Add a function to home all axes (i.e., gcode_G28)
8 years ago
8f895d5e01
Merge pull request #6530 from thinkyhead/rc_cleanups_2
...
Fixes for DUAL_NOZZLE_DUPLICATION_MODE
8 years ago
8002672938
Fixes for DUAL_NOZZLE_DUPLICATION_MODE
8 years ago
f69acde966
Merge pull request #6528 from MarlinFirmware/revert-6416-negative-mesh-fix
...
Revert "Fix for Meshpositions if printer has negative endstop positions"
8 years ago
4803a4322e
Revert "Fix for Meshpositions if printer has negative endstop positions"
8 years ago
4f74c416a4
Patch for BLTOUCH_HEATERS_OFF
8 years ago
1823a6ea29
Patch for missing DELTA_HEIGHT
8 years ago
d814e468d2
Fix set_heaters_for_bltouch and usage
...
- Only call `set_heaters_for_bltouch` when actually deploying/stowing
- Clear `next_emi_protection` when re-enabling heaters
8 years ago
4e1448e75a
Various fixes for compiler warnings
...
add BLTouch-related messages in english and (rusty) french;
add missing endstops.h in ultralcd.cpp;
fix misc. compiler warnings;
fix lsf_reset - ZERO macro can't handle a pointer as it would only memset the size of the pointer, not the size of the entire struct
8 years ago
fc9919b749
Merge pull request #6515 from thinkyhead/rc_cleanup_sunday
...
Some minor cleanups to code formatting
8 years ago
c12bc51a59
cardreader.cpp spacing tweak
8 years ago
46b714a52f
Cleanup spacing in pinsDebug.h
8 years ago
88141ca717
Remove things that aren't pins from pinsDebug_list.h
8 years ago
ff35b11d08
Resolve compiler complaint about memset volatile *
8 years ago
0b421e97c9
Rename some (unused) OMCA pins
8 years ago
c2c9f01c8e
Patch newly-introduced bug in IS_Z2_OR_PROBE
8 years ago
819df5e06d
Cleanups to pins debugging
8 years ago
42824b0e1f
Use new serial spacing function to save PROGMEM
8 years ago
cd72901fb7
Cleanups to UBL code
8 years ago
ce87c7803e
implement G26 changes per review
8 years ago
769817ce5e
Need to define this for Rigidboard V2
...
Motor current defaults need to be defined for Rigidboard
8 years ago
39c6c5621b
Merge pull request #6416 from SkyNet3D/negative-mesh-fix
...
Fix for Meshpositions if printer has negative endstop positions
8 years ago
671a44b8aa
Merge pull request #6410 from teemuatlut/LVD-Delta
...
Delta auto-calibration updates
8 years ago
5d5c9a040a
Merge pull request #6509 from thinkyhead/rc_config_patches
...
Configuration cleanup
8 years ago
d480b6f75a
Enable E1 stepper for DUAL_NOZZLE_DUPLICATION_MODE
8 years ago
dcde202157
Add startup notice & update host temperatures while waiting
...
Right now G26 doesn't send a notice to the host that it's running. It's
not until the heaters are at temperature that you know for sure if it's
running or not.
Added host temperature prints so that someone watching the host
interface will see the temperatures change during the warm up period.
Updates are sent every 5 seconds.
8 years ago
54751e8557
Put DISTINCT_E_FACTORS adjacent to the affected settings
8 years ago
0dbe4b3e54
Edit configurations to reduce verbosity, arrange logically
8 years ago
0750933bc6
Merge pull request #6490 from Bob-the-Kuhn/Missing-X-stop
...
Endstop not enabled if pin is zero
8 years ago
5ace3699b1
Output (commented) coordinates on G29 S-1; helps identify the x/y points that correspond with i/j coordinates, which eases manual tweaking of z values ( #6507 )
8 years ago
d7d4378481
Remove inaccurate version description
8 years ago
f169c04604
Merge pull request #6491 from thinkyhead/rc_cleanup_wednesday
...
Various cleanups for recent merges
8 years ago
6d63255ddc
Merge pull request #6508 from bgort/pio_improvements
...
PlatformIO-related improvement
8 years ago
cafc48dff8
little oops
8 years ago
627730948d
Add U8glib as a dependency to platformio.ini for those who use PlatformIO; this makes compiling even easier as u8glib will be downloaded and included automatically.
...
Also added the new .pio-related directory to .gitignore, and a few ignores for those who use cmake.
8 years ago
5974d8e168
change G26 default nozzle size to 0.4, consistent with instructions ( #6506 )
8 years ago
471a321624
leaner code for probe routine
8 years ago
3c0d5ba0a1
allow idle() to be called - fixes sometimes crash/hang in G29 I; ( #6505 )
8 years ago
2509587b5a
Correct over optimization of pre-initialized variables ( #6500 )
...
* Correct over optimization of pre-initialized variables
NEAR_ZERO() works most of the time... But it leaves corner cases
uncovered. We need to explicitly check if these variables are +/-
infinity.
* Correct over optimization of pre-initialized variables
8 years ago
585c00a728
Proposed changes
...
This is what I did yesterday:
- basicly gave the tests more comprehensive names; put all the
declarations at the top; got rid of the magic negative C-value (renamed
to P + A, O, T)
- "cos(RADIANS(180 + 30 * axis)) * (1 + circles * 0.1 * ((zig_zag) ? 1 :
-1)) * delta_calibration_radius" compiles wrong is zig_zag statement is
without brackets
- DELTA_TOWER_ANGLE_TRIM reset to 3 values (the calcs use the 3th value
to normalize will not compile otherwise)
-Wrote 3 dummies to keep EEPROM lenght the same
-Reset the configs to the 'original' with autocal + menu disabled (but
can be enabled of course)
8 years ago
29fa241617
Initial patches to G33
8 years ago
12ce051b55
Add a function to output spaces to serial
8 years ago
42f4c53254
Starting on G33 rewrite
8 years ago
baf3b91460
DELTA_TOWER_ANGLE_TRIM only needs AB
8 years ago
27cd165adf
Last three Spanish language strings
...
Updates as per @thinkyhead request.
8 years ago
2cc9774f34
Apply bltouch_menu
...
As proffered in #6252
8 years ago
1a111180de
Clean up set_heaters_for_bltouch
8 years ago
7db805930a
Cleanup configurations
8 years ago
8bf3a3fcdb
Remove inaccurate comments from ubl.h
8 years ago
47557d5a19
Fix up formatting in ubl.h
8 years ago
0a8e09c723
Clean up excess whitespace, comment formatting
8 years ago
a35c681453
Clean up least_squares_fit
8 years ago
40089249c3
add PIN_EXISTS to HAS_xyz_MIN macro
8 years ago
8020069371
Apply coding standards for indentation
8 years ago
dabca83742
Merge pull request #6437 from Kaibob2/patch-1
...
Update language_de.h
8 years ago
3d0a4c4ea9
Update language_de.h
8 years ago
6bf1d50188
Added missing translations ( #6458 )
8 years ago
404f767d44
Update language_tr.h ( #6463 )
8 years ago
5e701524f8
Update language_cz.h for new translations ( #6465 )
...
* Update language_cz.h for new translations
* Correction translate
* Revert correction back to hotend
8 years ago
0a92ce7a98
Completed french translation ( #6475 )
8 years ago
ff4fb42e7d
Add new strings as per recent changes in RCBugFix ( #6482 )
...
Adding missing strings to Spanish language, as per changes recently
done to the RCBugFix branch.
8 years ago
67d1fc5556
Update language_nl.h ( #6478 )
...
updated the RCbugfix release with additional Dutch translations
8 years ago
8c6b4537a6
Fix issue in itostr4sign with numbers <100 ( #6487 )
...
The first character in the string wasn't blanked if the number went from >= 100 to <100, resulting in artefacts in the displayed string.
8 years ago
4ea8d0f89b
Solved "The Travis CI build failed "
8 years ago
ed6b361e27
cleanup ready to squash
8 years ago
7a6a1ef583
M666 normalize positive values to <=0
...
M666
+ tower radians absolute value
8 years ago
4075b95519
Allow BL-Touch users to control heaters during probe event ( #6485 )
...
The Configuration.h file entries for BL-Touch have been updated to:
```cpp
//#define BLTOUCH
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are
turned off during probe event
```
8 years ago
6e8ecb908a
Shut down heaters during BL-Touch probe event
...
The electro-magnetic interference from the bed and nozzle are affecting
the BL-Touch repeatability for some users. This problem can be helped
by shutting down the heaters during the actual probe event and then
quickly turning them back on.
Because this code is messing with the heaters, it is written in a
paranoid manner. It only turns the heaters back on if everything is
EXACTLY as it expects things to be. The BL-Touch probe must have been
put into a deployed state less than 20 seconds prior, or the stow()
function will NOT turn the heaters on.
This code has been tested and works for both G28 and probing functions.
8 years ago
d8102aeca8
Cn negative : no tower angle calibration
...
Giving a negative number of probe points disables the tower angle
correction calibration ('4point' instead of '7point' solution)
EEPROM version updated
8 years ago
3601f08e87
Better tuned FolgerTech i3-2020 example file
8 years ago
a20b7d9581
Better tuned Example file for FolgerTech i3-2020
...
Also setting up Z-Probe on the machine.
8 years ago
bf2fe46062
Update language_de.h
8 years ago
11d34be060
Update language_de.h
8 years ago
817ecb9ff4
Merge pull request #6453 from thinkyhead/rc_cleanup_wednesday
...
Minor cleanups, work-in-progress
8 years ago
22f6e277af
Get example files fully into compliance
...
Change to support new name GRID_MAX_POINTS_XY
Start UBL at version 1.0 in the CUSTOM_MACHINE_NAME
8 years ago
a9bc1d30cc
z_offset change
...
Avoids to have to recalibrate the delta_height after a z_offset change
8 years ago
ec26e23e7e
Add my two 'Nice' machines as example configurations
...
These are my two 'Nice' machines. Both are good example machines. The
FolgerTech i3-2020 is probably the best value kit on the market right
now. And it has developed a 'Cult Following' of hobbiests. I'll always
have an up to date Configuration.h file set for it, so it may as well be
an example configuration.
And the gCreate gMax 1.5+ is the best printer I've ever seen that runs
Marlin. For sure, I'll always have up to the minute Configuration.h
files for this printer also. I've moved over to using the gMax as my
primary development machine for Marlin. So... Besides being a good
machine, it is a nice convienience for me to have this Configuration.h
file as an 'Example'.
8 years ago
adb8e68592
Fix stuck "Print Aborted" LCD message
...
Fixes #6393
8 years ago
096b927102
Minor optimization of FILAMENT_WIDTH_SENSOR
8 years ago
5bdb0b567d
Cosmetic patches
8 years ago
38ae7f4238
Added more translation strings
...
There are some quite tricky ones which are hardly translateable.
Maybe @Sebastianv650 can review this
8 years ago
4d96d3eab1
Bootscreen delay after clear, then set chars
...
Fixes #6426
8 years ago
5512130d6c
Only set Compare Mode for channel A
...
Fixes #6445
8 years ago
d467e97679
Smart-Fill and Mesh-Tilting (both 3-point and grid) working!
...
Also... The memory corruption issue may be fixed. The GCC compiler
was inlining static functions and this caused the G29() stack frame to
become much larger than the AVR could handle.
8 years ago
a699967ec8
Merge pull request #6443 from thinkyhead/rc_interrupt_fastio
...
Patch fastio.h with Timer 2 interrupt support
8 years ago
2823bf0874
Update fastio.h with special handling for Timer 2
8 years ago
fd535e111a
Fix up XYZ_CONSTS_FROM_CONFIG macro
8 years ago
03c2f756b9
Update language_de.h
8 years ago
dcf30a69d6
Allowing #define DELTA_TOWER_ANGLE_TRIM[C_AXIS]
...
More consistent with M665 where C-value is allowed as well, then
normalized
8 years ago
f41fb2b635
Numerous UBL-related changes:
...
* relocated ubl state to config. store:
* removed a number of ubl state variables and padding which were largely unused - saved 58 bytes of both SRAM and EEPROM;
* modified ubl sanity_check - no longer checks removed state variables that were otherwise unused, where checking didn't seem to accomplish anything, ultimately;
* removed pre_initialized state, saving 64 bytes of SRAM;
* removed automatic saving of UBL state after UBL activation/deactivation;
* consolidated multiple GRID_MAX_POINTS_X/Y to 'Global Leveling' section of EEPROM;
* minor update to G29 Sx notes/instructions;
* renamed mesh load and save parameter to 'slot' from 'm' for clarity;
8 years ago
f1a4758cef
use progmem instead of sram for mesh_index_to_x/ypos array;
...
fix maximum mesh_index_ array size at 16 (15+1);
8 years ago
87d240042a
Optimize number-to-string functions, no-fan display
8 years ago
959566cf0a
Update note about M163 / M164
8 years ago
830851df13
Spend some SRAM to optimize bilinear leveling
8 years ago
091179d960
bed_level_grid => z_values (also *_virt array)
8 years ago
23cdbbb2d3
Add a method to refresh bilinear bed level after a change
8 years ago
ccda63c473
Drop the accessor form for LCD value editing
8 years ago
10da175be5
Fix a pair of compiler complaints
8 years ago
ff0018e287
Format hex values as uppercase
8 years ago
77aa16005d
Polish font
...
Add polish font for GLCD displays only.
HD44780 work properly without polish character.
Update language_pl.h.
8 years ago
244f67590e
Delta probe height bug solved
8 years ago
406a83ff2d
Fix for Meshpositions if printer has negative endstop positions
8 years ago
3ed737425d
Fix typo in new SET_COM macro
8 years ago
88649b06a6
use planner.z_fade_height, etc. instead of private, ubl-specific g29 fade height
8 years ago
Bob-the-Kuhn