Disable BABYSTEP_XY, add to SDSORT comment

Marlin/Configuration_adv.h

@@ -510,7 +510,7 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256).
+    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
     #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
@@ -608,7 +608,7 @@
  */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY                // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
   #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
   //#define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping

Marlin/src/config/default/Configuration_adv.h

@@ -510,7 +510,7 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256).
+    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
     #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
@@ -608,7 +608,7 @@
  */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY                // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
   #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
   //#define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -510,7 +510,7 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256).
+    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
     #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
@@ -608,7 +608,7 @@
  */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY                // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
   #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
   //#define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping

Marlin/src/config/examples/Anet/A6/Configuration_adv.h

@@ -510,7 +510,7 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256).
+    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
     #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
@@ -608,7 +608,7 @@
  */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY                // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
   #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
   //#define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping

Marlin/src/config/examples/Anet/A8/Configuration_adv.h

@@ -510,7 +510,7 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256).
+    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
     #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
@@ -608,7 +608,7 @@
  */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY                // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
   #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
   //#define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping

Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h

@@ -510,7 +510,7 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256).
+    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
     #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
@@ -608,7 +608,7 @@
  */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY                // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
   #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
   //#define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping

Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -510,7 +510,7 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256).
+    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
     #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
@@ -608,7 +608,7 @@
  */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY                // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
   #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
   //#define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping

Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h

@@ -510,7 +510,7 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256).
+    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
     #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
@@ -608,7 +608,7 @@
  */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY                // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
   #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
   //#define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping

Marlin/src/config/examples/Cartesio/Configuration_adv.h

@@ -510,7 +510,7 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256).
+    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
     #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
@@ -608,7 +608,7 @@
  */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY                // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
   #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
   //#define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping

Marlin/src/config/examples/Felix/Configuration_adv.h

@@ -510,7 +510,7 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256).
+    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
     #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
@@ -608,7 +608,7 @@
  */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY                // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
   #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
   //#define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping

Marlin/src/config/examples/Folger Tech/i3-2020/Configuration_adv.h

@@ -510,7 +510,7 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256).
+    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
     #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
@@ -608,7 +608,7 @@
  */
 #define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY                // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
   #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
   //#define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping

Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -510,7 +510,7 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256).
+    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
     #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
@@ -608,7 +608,7 @@
  */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY                // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
   #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
   //#define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping

Marlin/src/config/examples/Malyan/M150/Configuration_adv.h

@@ -510,7 +510,7 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256).
+    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
     #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
@@ -608,7 +608,7 @@
  */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY                // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
   #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
   //#define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping

Marlin/src/config/examples/RigidBot/Configuration_adv.h

@@ -510,7 +510,7 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256).
+    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
     #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
@@ -608,7 +608,7 @@
  */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY                // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
   #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
   //#define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping

Marlin/src/config/examples/SCARA/Configuration_adv.h

@@ -510,7 +510,7 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256).
+    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
     #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
@@ -608,7 +608,7 @@
  */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY                // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
   #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
   //#define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping

Marlin/src/config/examples/Sanguinololu/Configuration_adv.h

@@ -499,7 +499,7 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256).
+    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
     #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
@@ -597,7 +597,7 @@
  */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY                // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
   #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
   //#define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping

Marlin/src/config/examples/TinyBoy2/Configuration_adv.h

@@ -510,7 +510,7 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256).
+    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
     #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
@@ -608,7 +608,7 @@
  */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY                // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
   #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
   //#define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping

Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h

@@ -523,7 +523,7 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256).
+    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
     #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
@@ -621,7 +621,7 @@
  */
 #define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY                // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
   #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
   //#define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping

Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h

@@ -510,7 +510,7 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256).
+    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
     #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
@@ -608,7 +608,7 @@
  */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY                // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
   #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
   //#define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -512,7 +512,7 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256).
+    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
     #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -512,7 +512,7 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256).
+    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
     #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
@@ -610,7 +610,7 @@
  */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY                // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
   #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
   //#define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping

Marlin/src/config/examples/delta/generic/Configuration_adv.h

@@ -512,7 +512,7 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256).
+    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
     #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
@@ -610,7 +610,7 @@
  */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY                // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
   #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
   //#define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping

Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h

@@ -512,7 +512,7 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256).
+    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
     #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
@@ -610,7 +610,7 @@
  */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY                // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
   #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
   //#define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping

Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h

@@ -517,7 +517,7 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256).
+    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
     #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
@@ -615,7 +615,7 @@
  */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY                // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
   #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
   //#define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping

Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h

@@ -512,7 +512,7 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256).
+    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
     #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
@@ -610,7 +610,7 @@
  */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY                // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
   #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
   //#define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h

@@ -510,7 +510,7 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256).
+    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
     #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
@@ -608,7 +608,7 @@
  */
 #define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY                // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
   #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
   //#define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping

Marlin/src/config/examples/makibox/Configuration_adv.h

@@ -510,7 +510,7 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256).
+    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
     #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
@@ -608,7 +608,7 @@
  */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY                // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
   #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
   //#define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping

Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h

@@ -510,7 +510,7 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256).
+    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
     #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
@@ -608,7 +608,7 @@
  */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY                // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
   #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
   //#define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping

Marlin/src/config/examples/wt150/Configuration_adv.h

@@ -510,7 +510,7 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256).
+    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
     #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
@@ -608,7 +608,7 @@
  */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY                // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
   #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
   //#define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping

Marlin/src/pins/pins_RAMPS_RE_ARM.h

@@ -275,7 +275,7 @@
 
     // SD Card Sorting options
     #if ENABLED(SDCARD_SORT_ALPHA)
-      #define SDSORT_LIMIT       255    // Maximum number of sorted items (10-256).
+      #define SDSORT_LIMIT       255    // Maximum number of sorted items (10-256). Costs 27 bytes each.
       #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
       #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
       #define SDSORT_USES_RAM    true   // Pre-allocate a static array for faster pre-sorting.