Roxy-3D
9cee81d47e
Option to show babysteps total since G28 ( #13580 )
6 years ago
Scott Lahteine
3221658a78
Adjust park position description
6 years ago
Marcio Teixeira
27a4927ed1
Add option to move away from endstop after homing. ( #13557 )
...
Add option to move away from endstop after homing.
- Add `ENDSTOP_BACKOFF` for printers with a recessed Z home button (Lulzbot TAZ 6).
- Also prevents chattering when sensorless homing with axes against bumpers.
6 years ago
Robby Candra
46445a5a16
Event G-code for Stop SD Print ( #13547 )
...
Co-Authored-By: 7eggert <7eggert@gmx.de>
Co-Authored-By: robbycandra <robbycandra.mail@gmail.com>
6 years ago
Scott Lahteine
8b7c3eec83
Games, for fun (and stress-testing) ( #13464 )
6 years ago
Scott Lahteine
5de7b5b35e
Games, for fun (and stress-testing) ( #13464 )
6 years ago
InsanityAutomation
7240e3a68f
Allow G26 with no heated bed ( #13511 )
6 years ago
Sam Lane
e3ab54753b
Add extra Linear Advance factors ( #13490 )
6 years ago
Scott Lahteine
d2e0c03afb
Remove trailing whitespace
6 years ago
7eggert
d96f7d6068
Minimum segments for G2/G3. Better for small arcs. ( #13466 )
6 years ago
Scott Lahteine
49cf92dc36
Extended condition macros ( #13419 )
...
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
6 years ago
InsanityAutomation
09eb30dc05
IDEX Mirror mode based on Formbot / Vivedino Symmetric mode ( #13404 )
6 years ago
Hadrien Jouet
0278ad0a6d
Add ESP32 WiFi interface ( #11209 )
6 years ago
InsanityAutomation
050eac03af
Single X Duplication Extension ( #13373 )
...
* Multi-nozzle selective duplication
* Use a bit-mask, reduce stepper_indirection.h size
* Tweak the multi-nozzle duplication description
* Use 'S' as a bool in M605
* Add HAS_DUPLICATION_MODE conditional
* Remove '_MODE' from the option name
* M605 in the style of Stacker M280
* Also include direct mask style (P)
6 years ago
Michiel Baird
b824a517aa
Add G38.4 and G38.5 ( #13348 )
6 years ago
Reece Kibble
dbead66988
Allows user to set (almost) any PWM frequency ( #12638 )
6 years ago
3dlabsio
645ca7af7a
M141 Heated Chamber, Temperature rework ( #12201 )
6 years ago
InsanityAutomation
bf8b38e0f7
Relocate configs above Marlin/src folder ( #13299 )
6 years ago
Scott Lahteine
998ce55be0
Alternative fan bitmap
6 years ago
Chris Pepper
4ab433d391
Fix binary protocol with one serial port ( #13270 )
...
- The `sdcard.transfer_port` variable is Marlin's internal serial port index, not the physical serial port number.
- Added packet number to "ok" response so hosts don't need to wait for the ACK.
- Renamed feature to `BINARY_FILE_TRANSFER`, as the speed up is only consequential to the ability to transfer binaries over serial.
6 years ago
InsanityAutomation
eb4bf93ea4
Add more Babystep options ( #13262 )
6 years ago
Scott Lahteine
1424b368cf
Tweak M122 comment in configs
6 years ago
Scott Lahteine
e00aad84af
Add M240 parameters D I J R S
6 years ago
Scott Lahteine
d2bdb71c13
Add PHOTO_GCODE option, photo trigger physical move ( #13168 )
6 years ago
revilor
e56c13670d
Service interval watchdog ( #13105 )
6 years ago
InsanityAutomation
7f1b69b0c8
Add HOST_PROMPT_SUPPORT ( #13039 )
6 years ago
Scott Lahteine
0feeef2604
Update copyright in headers
6 years ago
Scott Lahteine
5a316664e5
Update chopper timing
6 years ago
Marcio Teixeira
e1604198ff
G425 — Auto-calibrate Backlash and Nozzle Offsets ( #13050 )
6 years ago
InsanityAutomation
413e303ad5
More Advanced Pause options ( #12984 )
6 years ago
teemuatlut
d81342254a
Support new TMC drivers ( #13026 )
6 years ago
Nicolas G
6fb4001b58
Add option to disable fan speed slowing in M303 ( #13066 )
6 years ago
Scott Lahteine
38c2ca9281
Clean up trailing whitespace
6 years ago
revilor
6a57d0b381
Prusa MMU2 ( #12967 )
6 years ago
Scott Lahteine
996f7d1642
Fix I2C_POSITION_ENCODERS commentary
6 years ago
InsanityAutomation
48a3502656
Remote streamer improvements ( #12982 )
6 years ago
Scott Lahteine
ae91914260
Prevent name conflicts with mixed stepper drivers
6 years ago
Scott Lahteine
0eca236dcd
Fix L6470 config comments
6 years ago
Bob Kuhn
2f35747f29
L6470 SPI daisy chain support ( #12895 )
6 years ago
Scott Lahteine
e1f951813a
Remove old block end comment
6 years ago
teemuatlut
e6805582a6
M569 to change stepping mode. Add new TMC section to LCD. ( #12884 )
6 years ago
teemuatlut
1a79878dff
Remove TMC_Z_CALIBRATION in favor of Z_STEPPER_AUTO_ALIGN
6 years ago
InsanityAutomation
082f6a27de
ADAPTIVE_FAN_SLOWING extension to hotend thermal protection ( #12853 )
6 years ago
Scott Lahteine
5f2d75f45b
Move PINS_DEBUGGING to @section develop
6 years ago
Kaushik Vemparala
ba7e35cbab
Add LCD option BEEP_ON_FEEDRATE_CHANGE ( #12774 )
6 years ago
Scott Lahteine
371d9a1acf
Fix line-endings, formatting, whitespace
...
Followup to #12770
6 years ago
Ludy
cfc5e96b4b
Move JD to Config.h (and fix jerk->eeprom bug) ( #12720 )
6 years ago
teemuatlut
7a5e637a37
Add spreadCycle parameter sets ( #12645 )
6 years ago
Dave Johnson
9a4a463ec4
Sanity-check LIGHTWEIGHT_UI, move comment up ( #12630 )
6 years ago
teemuatlut
55144284c2
TMC connection test, spreadCycle parameters, improved debugging ( #12616 )
6 years ago
Marcio Teixeira
b22716e938
M425 Backlash Correction ( #11061 )
6 years ago
teemuatlut
50b2fbd031
Trinamic: Split stealthChop, improve driver monitoring, etc. ( #12582 )
6 years ago
Scott Lahteine
7a361ad36a
Alternative fan image option ( #12579 )
...
* Alternative fan bitmap
* Move bed over by 3px
6 years ago
Scott Lahteine
4f9ec9ab45
Add heating progress bars ( #12543 )
6 years ago
Scott Lahteine
b57343c255
Put status screen options in Configuration_adv.h
6 years ago
Scott Lahteine
1fcc13b011
Allow Serial Overrun Protection to be disabled
6 years ago
Scott Lahteine
30a49f5ee2
Apply extra condition to LCD_PROGRESS_BAR
6 years ago
revilor
b60abc7c37
[2.0.x] Macro G-codes ( #9365 )
6 years ago
InsanityAutomation
6471a75a22
Combine more tool-change variables ( #12137 )
6 years ago
Scott Lahteine
3866aeac52
Clean up ENCODER_RATE_MULTIPLIER config
6 years ago
Scott Lahteine
498dfa291e
Update and fix CHDK
6 years ago
Scott Lahteine
549d11225a
Add to description of Z_STEPPER_AUTO_ALIGN
...
In response to #12272
6 years ago
Chris Pepper
66d44c72c3
Add fast binary file transfer to SD card option ( #12249 )
6 years ago
Scott Lahteine
9e663a624b
Apply #pragma once to configuration files
6 years ago
Scott Lahteine
98c32d8df1
Fix a config endif label
6 years ago
TheLongAndOnly
5536228359
G34 Auto-align multi-stepper Z axis ( #11302 )
6 years ago
Scott Lahteine
182b1405d9
LCD conditionals in configurations
6 years ago
Scott Lahteine
e8031b1152
Add Custom Microstepping options
6 years ago
TheSFReader
a07ac6312f
G0 feedrate may be fixed or variable ( #12172 )
6 years ago
Ludy
a93e9e6e9b
Use preheat labels in place of PLA/ABS ( #12194 )
6 years ago
Scott Lahteine
9090065e9f
Move EXTRA_FAN_SPEED above FWRETRACT
6 years ago
Scott Lahteine
67a3c5a16a
Alternative info screen (Prusa-style) ( #12132 )
...
* Fix Z value display
* Add HAS_PRINT_PROGRESS
* Alternative Info Screen option
* Add LCD_INFO_SCREEN_STYLE to example configs
6 years ago
InsanityAutomation
3ec3872730
Single Z raise value for all tool-changing / parking ( #12090 )
...
* Universal tool-change Z lift
* Add TOOLCHANGE_ZRAISE to example configs
* Park/unpark changes to example configs
* Implement DEBUG_DXC_MODE
6 years ago
Scott Lahteine
8bf596bd4c
RETRACT_ZLIFT => RETRACT_ZRAISE
6 years ago
Scott Lahteine
84b59d58fb
Clean up whitespace
6 years ago
TheSFReader
af939c158a
Option for G0 to have a separate feedrate ( #12089 )
6 years ago
Scott Lahteine
43940d59ed
Fix trailing spaces
6 years ago
Scott Lahteine
cf5284cdf2
Add SD Firmware Update capability ( #12043 )
...
Co-Authored-By: timoxd7 <timoxd7@users.noreply.github.com>
6 years ago
Scott Lahteine
07db08e39d
Fix EXTRUDER_AUTO_FAN_SPEED comment
6 years ago
Scott Lahteine
ca0e308105
Fix up some units comments
6 years ago
Scott Lahteine
52a37913c1
Extend and apply some corrections
6 years ago
thesfreader
e09c144674
Add CNC-like G-code options
6 years ago
Marcio Teixeira
2067619a26
Add USB_FLASH_DRIVE_SUPPORT
6 years ago
Scott Lahteine
bb561baf9e
Tweak some config comments
6 years ago
Thomas Moore
ab4549d2bc
[2.0.x] Add simultaneous retraction for mixing extruder ( #11941 )
6 years ago
dot-bob
b0fd8f2d74
Add option to move Z on double-click when idle
6 years ago
Scott Lahteine
e78bdd654d
Clean up BABYSTEP options
6 years ago
Scott Lahteine
3c40933713
Remove trailing spaces, old comment
6 years ago
Thomas Moore
3286325044
Add TMC2130 sensorless probing
6 years ago
Victor Tseng
93839e2f73
Add option to enable/disable autoretract altogether ( #11904 )
6 years ago
Scott Lahteine
241168926d
Update some configs
6 years ago
Scott Lahteine
cee34f7290
Followup for BABYSTEP_HOTEND_Z_OFFSET ( #11916 )
6 years ago
teemuatlut
884ad75cb8
Update config files
6 years ago
InsanityAutomation
1104054d73
2.0 IDEX Independent z offset and other fixes ( #11862 )
...
* Add Formbot Raptor board
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
* Add a second Z probe Z offset
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
* Modify method to utilize live adjustment of hotend z offset
Should probably move config option to babystepping and rename as it may now apply to all multiextruder systems
* Move config item and catchup other code to current method
6 years ago
Scott Lahteine
ddcbf80f23
Followup for Z_TRIPLE_ENDSTOPS
6 years ago
Roxy-3D
d3d6be8210
Add MAX7219 reverse units option ( #11860 )
6 years ago
InsanityAutomation
f38570ac55
Add custom user menu title ( #11769 )
6 years ago
Scott Lahteine
f5c210d33d
Config changes supporting up to 6 extruders
6 years ago
Holger Müller
1a6f2b29b8
Add support for Triple-Z steppers/endstops
6 years ago
Scott Lahteine
f79a5a9dee
Tweak spacing of L6470 options
6 years ago
Sam Lane
1b6bc19427
Add external closed loop controller support
6 years ago
Marcio Teixeira
beb51c2d58
Show manual extrusion moves as relative in LCD
...
- Implements FR#11724
- Old behavior can be restored by commenting out MANUAL_E_MOVES_RELATIVE
6 years ago
Scott Lahteine
e3fc9aa35f
Update some config comments
6 years ago
Michael Triffon
f8c52c9c29
Azteeg X5 Mini WiFi support ( #11601 )
6 years ago
Scott Lahteine
2d3317a35b
Prettify Dual X Carriage description
6 years ago
Greg Nutt
a1a5367380
Smoothieboard V1.0/1.1 and A5984 support
6 years ago
Scott Lahteine
9c62c47579
[2.0.x] Fix Dual X Carriage tool change crash ( #11447 )
6 years ago
teemuatlut
fbcdf5eaeb
Simplify stepper driver per-axis selection
7 years ago
Roxy-3D
9660996cc3
Add Multi Unit Support for Max7219 to bugfix_2.0.0 ( #11285 )
...
* Add Multi Unit Support for Max7219 to bugfix_2.0.0
* Apply multi-MAX7219 to example configs
* Tweak some spacing, macros
7 years ago
Scott Lahteine
665ac1e4d0
Add POWER_LOSS_PIN support
7 years ago
Scott Lahteine
e0ab8acf19
Add "Marlin Dev Mode" option
7 years ago
Scott Lahteine
bd7f5848f1
Remove JUNCTION_DEVIATION_INCLUDE_E option ( #11147 )
7 years ago
etagle
5b49fccf80
Add stepper driver DIR delay configuration option
...
...and recommended pulse width configuration for A4988
7 years ago
Scott Lahteine
d4795e5b8e
[2.0.x] Tweaks and additions for MAX7219 ( #11034 )
7 years ago
Simon Jouet
e2aeda61ed
HAL for Espressif ESP32 Wifi
7 years ago
etagle
6f14bcaa3e
Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping
...
The timing value should be properly set for ALL boards. The compiler will check and set maximum step rate calculations based on those values.
7 years ago
etagle
39a7e7720d
Adaptive multiaxis step smoothing
...
- Stepper bugs fixed
- Support MIXING_EXTRUDER with Linear Advance
- Miscellaneous cleanup
7 years ago
Scott Lahteine
8a376e6beb
Update MINIMUM_STEPPER_PULSE description
7 years ago
Scott Lahteine
2deff0d9b9
Fix/Improve junction deviation
...
- Respect axis max acceleration limits instead of forcing a fixed acceleration value.
- The `junction_unit_vec` ensures proper handling of entry and exit speeds even when the axes involved have different limits.
7 years ago
Scott Lahteine
2e139fe50f
Tweak configuration spacing
7 years ago
Scott Lahteine
931ab4ec40
Rename Junction Deviation options
7 years ago
Jiri Jaburek
43ddb29f9e
Add FAN_MAX_PWM for M106-controlled fans
7 years ago
Scott Lahteine
acacee80a2
Add JUNCTION_ACCELERATION_FACTOR to configs
...
Part of #10688
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
7 years ago
Scott Lahteine
4d4bf7897d
Junction Deviation jerk limiting option
7 years ago
Scott Lahteine
840ff60952
Bring some configs up to date
7 years ago
nightdemonx
e911635fb1
Add thermocouple with AD8495 support
7 years ago
Scott Lahteine
05c33833e7
[2.0.x] Add NO_LCD_MENUS option ( #10582 )
7 years ago
Scott Lahteine
11ab017dd0
Creality3D Power-Loss Recovery
7 years ago
Marcio Teixeira
5cc7916e69
Add G29_RETRY_AND_RECOVER feature
...
- Add an option to retry G29, optionally executing a G-code procedure after each failed probe.
7 years ago
Sean
2d9b0a66fe
Add Filament Change accelerations
7 years ago
Lenbok
0e8242180d
Chamber temperature monitoring and auto fan control.
...
This is an initial cut for feedback, updated for 2.0.x.
Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?
Chamber temperatures are not reported on the LCD in any way.
When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.
As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
7 years ago
Sean
2fa0a73c2c
Implement filament change continuous purge
7 years ago
Scott Lahteine
1d22609473
MIN_PROBE_EDGE replaces DELTA_PROBEABLE_RADIUS
7 years ago
Marcio Teixeira
c24dbcbfe1
When STATUS_EXPIRE_SECONDS is 0, hide the position. ( #10081 )
...
Some users may prefer to hide the position updates on the `LIGHTWEIGHT_UI` altogether. This leads to an even less cluttered display (it also saves on SPI traffic and one byte of RAM).
7 years ago
Studiodyne
e7a61de8af
[2.0] FWRetract Reset (Best way) ( #10083 )
7 years ago
Scott Lahteine
e7570f3195
Improve TMC config organization, naming
7 years ago
Bob-the-Kuhn
6b4a928145
2uS default step pulse ( #9989 )
7 years ago
Scott Lahteine
94f5204629
Move AUTO_REPORT_SD_STATUS to SDSUPPORT block
7 years ago
Scott Lahteine
b198b49d15
Followup to AUTO_REPORT_SD_STATUS
...
Followup to #9832
7 years ago
Studiodyne
23a576faf7
[2.0] Fix for FW retract ( #9878 )
7 years ago
Scott Lahteine
b8485528b2
Prettify LCD_PROGRESS_BAR options
7 years ago
Scott Lahteine
e65a853c59
Fix LCD_PROGRESS_BAR
...
Fix #9208
7 years ago
Scott Lahteine
2bd252b501
[2.0.x] LIN_ADVANCE v1.5 ( #9712 )
7 years ago
Marcio Teixeira
532bb3aaa1
Lightweight status screen for ST7920
...
- This status screen uses the ST7920 character generator to greatly
reduce SPI traffic and MCU load when updating the status screen.
- Has been tested with the RepRapDiscount Full Graphics Smart Controller
but should work with any LCD that uses an ST7920 or fully compatible
controller.
7 years ago
Scott Lahteine
59c98d6fd5
Hephestos2 heated bed kit for all ( #9757 )
7 years ago
Kevin
9019ea0fce
Option to force X or Y to home first when homing the other axis
7 years ago
blye
330437ad7c
Update LCD_SET_PROGRESS_MANUALLY in configs
7 years ago
Bob-the-Kuhn
349dafa728
config update (set to -1)
7 years ago
Scott Lahteine
5b70d3da1c
Update DIGIPOT_I2C_MOTOR_CURRENTS comments
7 years ago
Scott Lahteine
694d2ebec0
TMC SW SPI pins in Configuration_adv.h
...
Counterpart to #9632
7 years ago
Thomas Moore
1541224a81
Enable Z axis and delta sensorless homing ( #9516 )
7 years ago
Scott Lahteine
b2f8b4ada5
I2C position encoders update ( #9533 )
...
Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.
7 years ago
Manuel Valentino
374f2a5e16
[2.0.x] Fixed wrong information about TMC2208 wiring ( #9335 )
7 years ago
teemuatlut
5c69d45f5b
[2.0.x] TMC2130 support for LPC platform ( #9114 )
7 years ago
Scott Lahteine
8190fdb260
[2.0.x] Option to use Neopixel as case light ( #9270 )
...
* Add option to use Neopixel as case light
* Apply CASE_LIGHT_USE_NEOPIXEL to example configs
7 years ago
Scott Lahteine
02ff12d491
More up front option to show SD percentage
7 years ago
Scott Lahteine
5c076a6d93
Improved M915 description
7 years ago
teemuatlut
cdc61ebf53
Add M915 configuration option
7 years ago
Scott Lahteine
7541316bb4
Add M701/M702 Filament Load/Unload, M603
7 years ago
Scott Lahteine
2929c9e56f
A specific option to SLIM_LCD_MENUS
7 years ago
Scott Lahteine
f704f405af
Add pause/resume actions on M600, M125
7 years ago
Thomas Moore
f0a8a1a853
[2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE ( #8866 )
...
* Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
7 years ago
Scott Lahteine
fdc5e72720
A single setting to validate filament width
7 years ago
Scott Lahteine
933f76fda3
Option to disable all volumetric extrusion
7 years ago
robpower
5595098063
V2 Extended NanoDLP_Z_Move_Sync to G4 & G28,Added all axis option.
7 years ago
teemuatlut
0cd1e91056
[2.0.x] TMC driver update ( #8769 )
7 years ago
Scott Lahteine
ae663a4198
PROBE_DOUBLE_TOUCH => MULTIPLE_PROBING
7 years ago
Scott Lahteine
8f90642eea
LED_CONTROL_MENU config changes
7 years ago
Tannoo
cf0f78336b
New Feature: LED_CONTROL_MENU
7 years ago
Scott Lahteine
a67cf78c6b
Clean up whitespace, spacing
7 years ago
Scott Lahteine
7be4857ab9
Tweak BLOCK_BUFFER_SIZE description
7 years ago
Scott Lahteine
5926c9c97b
Followup for MESH_EDIT_GFX_OVERLAY
7 years ago
Scott Lahteine
dc82babe8e
Implement NANODLP_Z_SYNC for 2.0.x
7 years ago
Scott Lahteine
54774841ba
Merge pull request #8416 from thinkyhead/bf2_M114_DETAIL
...
[2.0] Add M114_DETAIL to Configuration_adv.h
7 years ago
Scott Lahteine
009e3a7aa7
Add M114_DETAIL to Configuration_adv.h
7 years ago
Scott Lahteine
3f0a982b8c
Move Filament Width Sensor to Configuration_adv.h
7 years ago
Scott Lahteine
95ea43bde4
Update XYZ dual stepper configurations
7 years ago
Roxy-3D
ed62c621d7
Fix G26 Circle Drawing. Add Default Extrusion Settings ( #8313 )
...
- Fix G26 Circle Drawing.
- Add default extrusion settings so machine can print lines on print bed
- Yet to be done: Get LCD Menu's to use these settings.
7 years ago
Scott Lahteine
2c099fd4c2
Update Thermal Protection Documentation
7 years ago
Scott Lahteine
1b42fba39b
Add CNC_COORDINATE_SYSTEMS to configs
7 years ago
Scott Lahteine
ce1c9c0808
Tweak QUICK_HOME description
7 years ago
Scott Lahteine
e04425281d
Add Dual Steppers / Endstops to configs
7 years ago
Scott Lahteine
edff2c917b
Cleanup for DIGIPOTS settings
7 years ago
Scott Lahteine
6b1d1a818b
Revert default BABYSTEP_MULTIPLICATOR to 1
7 years ago
Scott Lahteine
7fad26549b
Concise SD_REPRINT_LAST_SELECTED_FILE description
7 years ago
Roxy-3D
3f5f39576b
Reprint option for last SD Memory card file ( #8106 )
...
* Re-Print of same SD Memory Card file with single click
* Re-Print of same SD Memory Card file with single click
* This is the bugfix-v2.0.0 version of https://github.com/MarlinFirmware/Marlin/pull/8104
7 years ago
Scott Lahteine
7f55d82fd1
Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h
7 years ago
Scott Lahteine
580b6e9089
Apply physical limits to mesh bounds
7 years ago
Scott Lahteine
3d2b2eb1ca
Prevent SDCARD_SORT_ALPHA from exploding
7 years ago
Scott Lahteine
783ddf9691
Add SCROLL_LONG_FILENAMES option
7 years ago
Thomas Moore
67cc29cd3c
Update UBL mesh boundaries to accomidate beds centered at 0, 0 ( #8012 )
7 years ago
Scott Lahteine
ce48403a0b
Add EXTRA_FAN_SPEED feature
...
Based on #7883 by @studiodyne
7 years ago
Scott Lahteine
5c4f3e0107
Add LCD_SET_PROGRESS_MANUALLY
7 years ago
Bob-the-Kuhn
4e3ee845b9
config_adv ( #7941 )
...
get rid of twi.h
move to board files
7 years ago
Scott Lahteine
b30b55307c
Merge pull request #7909 from thinkyhead/bf2_goodbye_legacy_advance
...
[2.0.x] Remove legacy ADVANCE feature
7 years ago
Scott Lahteine
560d366b80
Move VIKI SCK/MOSI pins fix to Conditionals_POST.h
7 years ago
Scott Lahteine
03f4891fb9
Remove legacy ADVANCE feature
7 years ago
Scott Lahteine
508d764d63
Add serial XON/XOFF handshaking
...
From @ejtagle, originally #7459
7 years ago
Tannoo
c869dc9745
User script return-to-status option
7 years ago
Scott Lahteine
ce1638e32f
Add Babystep Z graphic overlay
...
See PR #7593
7 years ago