Option for G0 to have a separate feedrate (#12089)

Marlin/Configuration_adv.h

@@ -1613,9 +1613,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/default/Configuration_adv.h

@@ -1613,9 +1613,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Anet/A2/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Anet/A6/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Anet/A8/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -1620,9 +1620,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Cartesio/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h

@@ -1615,9 +1615,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Einstart-S/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Felix/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h

@@ -1614,9 +1614,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h

@@ -1616,9 +1616,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h

@@ -1617,9 +1617,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/MakerParts/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Malyan/M150/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Malyan/M200/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h

@@ -1620,9 +1620,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/RigidBot/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/SCARA/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Sanguinololu/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/TheBorg/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/TinyBoy2/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h

@@ -1625,9 +1625,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h

@@ -1614,9 +1614,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h

@@ -1614,9 +1614,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -1614,9 +1614,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h

@@ -1614,9 +1614,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -1614,9 +1614,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/delta/generic/Configuration_adv.h

@@ -1614,9 +1614,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h

@@ -1614,9 +1614,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h

@@ -1614,9 +1614,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/makibox/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h

@@ -1612,9 +1612,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/config/examples/wt150/Configuration_adv.h

@@ -1613,9 +1613,15 @@
 /**
  * CNC G-code options
  * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
  */
 //#define PAREN_COMMENTS      // Support for parentheses-delimited comments
 //#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+//#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
+#if ENABLED(G0_FEEDRATE)
+  #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
+#endif 
 
 /**
  * User-defined menu items that execute custom GCode

Marlin/src/gcode/gcode.cpp

@@ -188,7 +188,7 @@ void GcodeSuite::process_parsed_command(
     case 'G': switch (parser.codenum) {
 
       case 0: case 1: G0_G1(                                      // G0: Fast Move, G1: Linear Move
-                        #if IS_SCARA
+                        #if IS_SCARA || ENABLED(G0_FEEDRATE)
                           parser.codenum == 0
                         #endif
                       );

Marlin/src/gcode/gcode.h

@@ -341,7 +341,7 @@ public:
 private:
 
   static void G0_G1(
-    #if IS_SCARA
+    #if IS_SCARA || ENABLED(G0_FEEDRATE)
       bool fast_move=false
     #endif
   );

Marlin/src/gcode/motion/G0_G1.cpp

@@ -37,6 +37,10 @@
 
 extern float destination[XYZE];
 
+#if ENABLED(G0_FEEDRATE)
+  float saved_g0_feedrate_mm_s =  MMM_TO_MMS(DEFAULT_G0_FEEDRATE);
+#endif
+
 #if ENABLED(NO_MOTION_BEFORE_HOMING)
   #define G0_G1_CONDITION !axis_unhomed_error(parser.seen('X'), parser.seen('Y'), parser.seen('Z'))
 #else
@@ -47,11 +51,24 @@ extern float destination[XYZE];
  * G0, G1: Coordinated movement of X Y Z E axes
  */
 void GcodeSuite::G0_G1(
-  #if IS_SCARA
+  #if IS_SCARA || ENABLED(G0_FEEDRATE)
     bool fast_move/*=false*/
   #endif
 ) {
+  #if ENABLED(G0_FEEDRATE)
+    float saved_g1_feedrate_mm_s;
+  #endif
+  
   if (IsRunning() && G0_G1_CONDITION) {
+    
+    #if ENABLED(G0_FEEDRATE)
+      if (fast_move) {
+        // Save standard feedrate before setting feedrate to fast/g0
+        saved_g1_feedrate_mm_s = feedrate_mm_s;
+        feedrate_mm_s = saved_g0_feedrate_mm_s;
+      }
+    #endif
+
     get_destination_from_command(); // For X Y Z E F
 
     #if ENABLED(FWRETRACT) && ENABLED(FWRETRACT_AUTORETRACT)
@@ -77,6 +94,14 @@ void GcodeSuite::G0_G1(
       prepare_move_to_destination();
     #endif
 
+    #if ENABLED(G0_FEEDRATE)
+      // save G0 feedrate, and restore standard feedrate as soon as possible 
+      if (fast_move) {
+        saved_g0_feedrate_mm_s = feedrate_mm_s;
+        feedrate_mm_s = saved_g1_feedrate_mm_s;
+      }
+    #endif
+    
     #if ENABLED(NANODLP_Z_SYNC)
       #if ENABLED(NANODLP_ALL_AXIS)
         #define _MOVE_SYNC parser.seenval('X') || parser.seenval('Y') || parser.seenval('Z')  // For any move wait and output sync message