Prettify LCD_PROGRESS_BAR options

Marlin/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/default/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/Anet/A6/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/Anet/A8/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h

@@ -509,19 +509,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/Cartesio/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h

@@ -497,19 +497,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/Creality/Ender/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/Felix/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  #define LCD_PROGRESS_BAR
+  #define LCD_PROGRESS_BAR                // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/MakerParts/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/Malyan/M150/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/Malyan/M200/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h

@@ -509,19 +509,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/RigidBot/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/SCARA/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/Sanguinololu/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/TheBorg/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/TinyBoy2/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h

@@ -521,19 +521,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  #define LCD_PROGRESS_BAR
+  #define LCD_PROGRESS_BAR                // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h

@@ -510,19 +510,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -510,19 +510,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h

@@ -510,19 +510,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -510,19 +510,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/delta/generic/Configuration_adv.h

@@ -510,19 +510,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h

@@ -510,19 +510,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h

@@ -515,19 +515,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h

@@ -510,19 +510,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/makibox/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h

@@ -508,19 +508,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 

Marlin/src/config/examples/wt150/Configuration_adv.h

@@ -509,19 +509,13 @@
 //#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
   #endif
 #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY