Alternative fan image option (#12579)

* Alternative fan bitmap
* Move bed over by 3px

Marlin/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternate fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/default/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/Anet/A2/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/Anet/A6/Configuration_adv.h

@@ -815,6 +815,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/Anet/A8/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/ArmEd/Configuration_adv.h

@@ -788,6 +788,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -815,6 +815,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -824,6 +824,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/Cartesio/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/Einstart-S/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/Felix/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h

@@ -820,6 +820,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h

@@ -821,6 +821,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/MakerParts/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/Malyan/M150/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/Malyan/M200/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h

@@ -824,6 +824,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/RigidBot/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/SCARA/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/Sanguinololu/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/TheBorg/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/TinyBoy2/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h

@@ -829,6 +829,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h

@@ -818,6 +818,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h

@@ -818,6 +818,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -818,6 +818,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h

@@ -818,6 +818,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -818,6 +818,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h

@@ -818,6 +818,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h

@@ -818,6 +818,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h

@@ -818,6 +818,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/delta/generic/Configuration_adv.h

@@ -818,6 +818,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h

@@ -818,6 +818,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h

@@ -818,6 +818,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/makibox/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/config/examples/wt150/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 

Marlin/src/lcd/dogm/dogm_Statusscreen.h

@@ -582,7 +582,7 @@
     #ifndef STATUS_BED_X
       #define STATUS_BED_X    72
     #endif
-    #define STATUS_BED_TEXT_X STATUS_BED_X + 13
+    #define STATUS_BED_TEXT_X (STATUS_BED_X + 13)
 
     const unsigned char status_bed_bmp[] PROGMEM = {
       B11111111,B11111111,B11000000,
@@ -624,35 +624,35 @@
       };
 
       const unsigned char status_bed_on_bmp[] PROGMEM = {
-        B00100000,B10000010,B00000000,
+        B00000100,B00010000,B01000000,
+        B00000010,B00001000,B00100000,
+        B00000010,B00001000,B00100000,
+        B00000100,B00010000,B01000000,
+        B00001000,B00100000,B10000000,
         B00010000,B01000001,B00000000,
         B00010000,B01000001,B00000000,
-        B00100000,B10000010,B00000000,
-        B01000001,B00000100,B00000000,
-        B10000010,B00001000,B00000000,
-        B10000010,B00001000,B00000000,
-        B01000001,B00000100,B00000000,
-        B00100000,B10000010,B00000000,
+        B00001000,B00100000,B10000000,
+        B00000100,B00010000,B01000000,
         B00000000,B00000000,B00000000,
-        B11111111,B11111111,B11000000,
-        B11111111,B11111111,B11000000
+        B00011111,B11111111,B11111000,
+        B00011111,B11111111,B11111000
       };
 
     #else
 
       const unsigned char status_bed_bmp[] PROGMEM = {
-        B00100000,B10000010,B00000000,
+        B00000100,B00010000,B01000000,
+        B00000010,B00001000,B00100000,
+        B00000010,B00001000,B00100000,
+        B00000100,B00010000,B01000000,
+        B00001000,B00100000,B10000000,
         B00010000,B01000001,B00000000,
         B00010000,B01000001,B00000000,
-        B00100000,B10000010,B00000000,
-        B01000001,B00000100,B00000000,
-        B10000010,B00001000,B00000000,
-        B10000010,B00001000,B00000000,
-        B01000001,B00000100,B00000000,
-        B00100000,B10000010,B00000000,
+        B00001000,B00100000,B10000000,
+        B00000100,B00010000,B01000000,
         B00000000,B00000000,B00000000,
-        B11111111,B11111111,B11000000,
-        B11111111,B11111111,B11000000
+        B00011111,B11111111,B11111000,
+        B00011111,B11111111,B11111000
       };
 
     #endif
@@ -684,206 +684,417 @@
     #define STATUS_FAN_Y      2
     #define STATUS_FAN_WIDTH 20
 
-    const unsigned char status_fan0_bmp[] PROGMEM = {
-      B00111111,B11111111,B11110000,
-      B00111000,B00000000,B01110000,
-      B00110000,B11111100,B00110000,
-      B00100000,B11111100,B00010000,
-      B00100000,B01111000,B00010000,
-      B00100000,B00110000,B00010000,
-      B00101100,B00000000,B11010000,
-      B00101110,B00110001,B11010000,
-      B00101111,B01111011,B11010000,
-      B00101111,B01111011,B11010000,
-      B00101110,B00110001,B11010000,
-      B00101100,B00000000,B11010000,
-      B00100000,B00110000,B00010000,
-      B00100000,B01111000,B00010000,
-      B00100000,B11111100,B00010000,
-      B00110000,B11111100,B00110000,
-      B00111000,B00000000,B01110000,
-      B00111111,B11111111,B11110000
-    };
+    #if ENABLED(STATUS_ALT_FAN_BITMAP)
 
-    #if STATUS_FAN_FRAMES == 2
-      const unsigned char status_fan1_bmp[] PROGMEM = {
+      const unsigned char status_fan0_bmp[] PROGMEM = {
+        B00000001,B11111110,B00000000,
+        B00000110,B00000001,B10000000,
+        B00001000,B11111100,B01000000,
+        B00010000,B11111100,B00100000,
+        B00010000,B01111000,B00100000,
+        B00100000,B00110000,B00010000,
+        B00101100,B00000000,B11010000,
+        B00101110,B00110001,B11010000,
+        B00101111,B01111011,B11010000,
+        B00101111,B01111011,B11010000,
+        B00101110,B00110001,B11010000,
+        B00101100,B00000000,B11010000,
+        B00100000,B00110000,B00010000,
+        B00010000,B01111000,B00100000,
+        B00010000,B11111100,B00100000,
+        B00001000,B11111100,B01000000,
+        B00000110,B00000001,B10000000,
+        B00000001,B11111110,B00000000
+      };
+
+      #if STATUS_FAN_FRAMES == 2
+        const unsigned char status_fan1_bmp[] PROGMEM = {
+          B00000001,B11111110,B00000000,
+          B00000110,B00000001,B10000000,
+          B00001001,B10000110,B01000000,
+          B00010011,B10000111,B00100000,
+          B00010111,B10000111,B10100000,
+          B00101111,B10000111,B11010000,
+          B00101111,B00000011,B11010000,
+          B00100000,B00110000,B00010000,
+          B00100000,B01111000,B00010000,
+          B00100000,B01111000,B00010000,
+          B00100000,B00110000,B00010000,
+          B00101111,B00000011,B11010000,
+          B00101111,B10000111,B11010000,
+          B00010111,B10000111,B10100000,
+          B00010011,B10000111,B00100000,
+          B00001001,B10000110,B01000000,
+          B00000110,B00000001,B10000000,
+          B00000001,B11111110,B00000000
+        };
+      #endif
+
+    #else // !STATUS_ALT_FAN_BITMAP
+
+      const unsigned char status_fan0_bmp[] PROGMEM = {
         B00111111,B11111111,B11110000,
         B00111000,B00000000,B01110000,
-        B00110001,B10000110,B00110000,
-        B00100011,B10000111,B00010000,
-        B00100111,B10000111,B10010000,
-        B00101111,B10000111,B11010000,
-        B00101111,B00000011,B11010000,
-        B00100000,B00110000,B00010000,
-        B00100000,B01111000,B00010000,
+        B00110000,B11111100,B00110000,
+        B00100000,B11111100,B00010000,
         B00100000,B01111000,B00010000,
         B00100000,B00110000,B00010000,
-        B00101111,B00000011,B11010000,
-        B00101111,B10000111,B11010000,
-        B00100111,B10000111,B10010000,
-        B00100011,B10000111,B00010000,
-        B00110001,B10000110,B00110000,
+        B00101100,B00000000,B11010000,
+        B00101110,B00110001,B11010000,
+        B00101111,B01111011,B11010000,
+        B00101111,B01111011,B11010000,
+        B00101110,B00110001,B11010000,
+        B00101100,B00000000,B11010000,
+        B00100000,B00110000,B00010000,
+        B00100000,B01111000,B00010000,
+        B00100000,B11111100,B00010000,
+        B00110000,B11111100,B00110000,
         B00111000,B00000000,B01110000,
         B00111111,B11111111,B11110000
       };
-    #endif
+
+      #if STATUS_FAN_FRAMES == 2
+        const unsigned char status_fan1_bmp[] PROGMEM = {
+          B00111111,B11111111,B11110000,
+          B00111000,B00000000,B01110000,
+          B00110001,B10000110,B00110000,
+          B00100011,B10000111,B00010000,
+          B00100111,B10000111,B10010000,
+          B00101111,B10000111,B11010000,
+          B00101111,B00000011,B11010000,
+          B00100000,B00110000,B00010000,
+          B00100000,B01111000,B00010000,
+          B00100000,B01111000,B00010000,
+          B00100000,B00110000,B00010000,
+          B00101111,B00000011,B11010000,
+          B00101111,B10000111,B11010000,
+          B00100111,B10000111,B10010000,
+          B00100011,B10000111,B00010000,
+          B00110001,B10000110,B00110000,
+          B00111000,B00000000,B01110000,
+          B00111111,B11111111,B11110000
+        };
+      #endif
+
+    #endif // !STATUS_ALT_FAN_BITMAP
 
   #elif STATUS_FAN_FRAMES == 3
 
     #define STATUS_FAN_WIDTH 21
 
-    const unsigned char status_fan0_bmp[] PROGMEM = {
-      B00111111,B11111111,B11111000,
-      B00111110,B00000000,B11111000,
-      B00111001,B00000001,B00111000,
-      B00110111,B10000011,B11011000,
-      B00110111,B10000011,B11011000,
-      B00101111,B11000111,B11101000,
-      B00100111,B11000111,B11001000,
-      B00100001,B11111111,B00001000,
-      B00100000,B01111100,B00001000,
-      B00100000,B01111100,B00001000,
-      B00100000,B01111100,B00001000,
-      B00100001,B11111111,B00001000,
-      B00100111,B11000111,B11001000,
-      B00101111,B11000111,B11101000,
-      B00110111,B10000011,B11011000,
-      B00110111,B10000011,B11011000,
-      B00111001,B00000001,B00111000,
-      B00111110,B00000000,B11111000,
-      B00111111,B11111111,B11111000
-    };
-    const unsigned char status_fan1_bmp[] PROGMEM = {
-      B00111111,B11111111,B11111000,
-      B00111110,B00110000,B11111000,
-      B00111001,B11110000,B00111000,
-      B00110001,B11110000,B00011000,
-      B00110000,B11110000,B00011000,
-      B00100000,B11110000,B01101000,
-      B00100000,B00110001,B11101000,
-      B00100000,B00111001,B11101000,
-      B00100000,B01111111,B11111000,
-      B00111111,B11111111,B11111000,
-      B00111111,B11111100,B00001000,
-      B00101111,B00111000,B00001000,
-      B00101110,B00011000,B00001000,
-      B00101100,B00011110,B00001000,
-      B00110000,B00011110,B00011000,
-      B00110000,B00011111,B00011000,
-      B00111000,B00011111,B00111000,
-      B00111110,B00011000,B11111000,
-      B00111111,B11111111,B11111000
-    };
-    const unsigned char status_fan2_bmp[] PROGMEM = {
-      B00111111,B11111111,B11111000,
-      B00111110,B00011000,B11111000,
-      B00111000,B00011111,B00111000,
-      B00110000,B00011111,B10011000,
-      B00110100,B00011111,B00011000,
-      B00101110,B00011110,B00001000,
-      B00101111,B00011100,B00001000,
-      B00101111,B10111000,B00001000,
-      B00111111,B11111100,B00001000,
-      B00111111,B11111111,B11111000,
-      B00100000,B01111111,B11111000,
-      B00100000,B00111011,B11101000,
-      B00100000,B01110001,B11101000,
-      B00100000,B11110000,B11101000,
-      B00110001,B11110000,B01011000,
-      B00110011,B11110000,B00011000,
-      B00111001,B11110000,B00111000,
-      B00111110,B00110000,B11111000,
-      B00111111,B11111111,B11111000
-    };
+    #if ENABLED(STATUS_ALT_FAN_BITMAP)
+
+      const unsigned char status_fan0_bmp[] PROGMEM = {
+        B00000001,B11111111,B00000000,
+        B00000110,B00000000,B11000000,
+        B00001001,B00000001,B00100000,
+        B00010111,B10000011,B11010000,
+        B00010111,B10000011,B11010000,
+        B00101111,B11000111,B11101000,
+        B00100111,B11000111,B11001000,
+        B00100001,B11111111,B00001000,
+        B00100000,B01111100,B00001000,
+        B00100000,B01111100,B00001000,
+        B00100000,B01111100,B00001000,
+        B00100001,B11111111,B00001000,
+        B00100111,B11000111,B11001000,
+        B00101111,B11000111,B11101000,
+        B00010111,B10000011,B11010000,
+        B00010111,B10000011,B11010000,
+        B00001001,B00000001,B00100000,
+        B00000110,B00000000,B11000000,
+        B00000001,B11111111,B00000000
+      };
+      const unsigned char status_fan1_bmp[] PROGMEM = {
+        B00000001,B11111111,B00000000,
+        B00000110,B00110000,B11000000,
+        B00001001,B11110000,B00100000,
+        B00010001,B11110000,B00010000,
+        B00010000,B11110000,B00010000,
+        B00100000,B11110000,B01101000,
+        B00100000,B00110001,B11101000,
+        B00100000,B00111001,B11101000,
+        B00100000,B01111111,B11111000,
+        B00111111,B11111111,B11111000,
+        B00111111,B11111100,B00001000,
+        B00101111,B00111000,B00001000,
+        B00101110,B00011000,B00001000,
+        B00101100,B00011110,B00001000,
+        B00010000,B00011110,B00010000,
+        B00010000,B00011111,B00010000,
+        B00001000,B00011111,B00100000,
+        B00000110,B00011000,B11000000,
+        B00000001,B11111111,B00000000
+      };
+      const unsigned char status_fan2_bmp[] PROGMEM = {
+        B00000001,B11111111,B00000000,
+        B00000110,B00011000,B11000000,
+        B00001000,B00011111,B00100000,
+        B00010000,B00011111,B10010000,
+        B00010100,B00011111,B00010000,
+        B00101110,B00011110,B00001000,
+        B00101111,B00011100,B00001000,
+        B00101111,B10111000,B00001000,
+        B00111111,B11111100,B00001000,
+        B00111111,B11111111,B11111000,
+        B00100000,B01111111,B11111000,
+        B00100000,B00111011,B11101000,
+        B00100000,B01110001,B11101000,
+        B00100000,B11110000,B11101000,
+        B00010001,B11110000,B01010000,
+        B00010011,B11110000,B00010000,
+        B00001001,B11110000,B00100000,
+        B00000110,B00110000,B11000000,
+        B00000001,B11111111,B00000000
+      };
+
+    #else // !STATUS_ALT_FAN_BITMAP
+
+      const unsigned char status_fan0_bmp[] PROGMEM = {
+        B00111111,B11111111,B11111000,
+        B00111110,B00000000,B11111000,
+        B00111001,B00000001,B00111000,
+        B00110111,B10000011,B11011000,
+        B00110111,B10000011,B11011000,
+        B00101111,B11000111,B11101000,
+        B00100111,B11000111,B11001000,
+        B00100001,B11111111,B00001000,
+        B00100000,B01111100,B00001000,
+        B00100000,B01111100,B00001000,
+        B00100000,B01111100,B00001000,
+        B00100001,B11111111,B00001000,
+        B00100111,B11000111,B11001000,
+        B00101111,B11000111,B11101000,
+        B00110111,B10000011,B11011000,
+        B00110111,B10000011,B11011000,
+        B00111001,B00000001,B00111000,
+        B00111110,B00000000,B11111000,
+        B00111111,B11111111,B11111000
+      };
+      const unsigned char status_fan1_bmp[] PROGMEM = {
+        B00111111,B11111111,B11111000,
+        B00111110,B00110000,B11111000,
+        B00111001,B11110000,B00111000,
+        B00110001,B11110000,B00011000,
+        B00110000,B11110000,B00011000,
+        B00100000,B11110000,B01101000,
+        B00100000,B00110001,B11101000,
+        B00100000,B00111001,B11101000,
+        B00100000,B01111111,B11111000,
+        B00111111,B11111111,B11111000,
+        B00111111,B11111100,B00001000,
+        B00101111,B00111000,B00001000,
+        B00101110,B00011000,B00001000,
+        B00101100,B00011110,B00001000,
+        B00110000,B00011110,B00011000,
+        B00110000,B00011111,B00011000,
+        B00111000,B00011111,B00111000,
+        B00111110,B00011000,B11111000,
+        B00111111,B11111111,B11111000
+      };
+      const unsigned char status_fan2_bmp[] PROGMEM = {
+        B00111111,B11111111,B11111000,
+        B00111110,B00011000,B11111000,
+        B00111000,B00011111,B00111000,
+        B00110000,B00011111,B10011000,
+        B00110100,B00011111,B00011000,
+        B00101110,B00011110,B00001000,
+        B00101111,B00011100,B00001000,
+        B00101111,B10111000,B00001000,
+        B00111111,B11111100,B00001000,
+        B00111111,B11111111,B11111000,
+        B00100000,B01111111,B11111000,
+        B00100000,B00111011,B11101000,
+        B00100000,B01110001,B11101000,
+        B00100000,B11110000,B11101000,
+        B00110001,B11110000,B01011000,
+        B00110011,B11110000,B00011000,
+        B00111001,B11110000,B00111000,
+        B00111110,B00110000,B11111000,
+        B00111111,B11111111,B11111000
+      };
+
+    #endif // !STATUS_ALT_FAN_BITMAP
 
   #elif STATUS_FAN_FRAMES == 4
 
     #define STATUS_FAN_WIDTH 21
 
-    const unsigned char status_fan0_bmp[] PROGMEM = {
-      B00111111,B11111111,B11111000,
-      B00111110,B00000000,B11111000,
-      B00111000,B00111111,B00111000,
-      B00110000,B01111110,B00011000,
-      B00110000,B01111100,B00011000,
-      B00101000,B01111100,B00001000,
-      B00101100,B00111000,B00001000,
-      B00101111,B00111001,B11001000,
-      B00101111,B11111111,B11101000,
-      B00101111,B11000111,B11101000,
-      B00101111,B11111111,B11101000,
-      B00100111,B00111001,B11101000,
-      B00100000,B00111000,B01101000,
-      B00100000,B01111100,B00101000,
-      B00110000,B01111100,B00011000,
-      B00110000,B11111100,B00011000,
-      B00111001,B11111000,B00111000,
-      B00111110,B00000000,B11111000,
-      B00111111,B11111111,B11111000
-    };
-    const unsigned char status_fan1_bmp[] PROGMEM = {
-      B00111111,B11111111,B11111000,
-      B00111110,B00000000,B11111000,
-      B00111000,B00001111,B00111000,
-      B00110100,B00011111,B11011000,
-      B00110110,B00011111,B10011000,
-      B00101111,B00011111,B00001000,
-      B00101111,B10011110,B00001000,
-      B00101111,B11111100,B00001000,
-      B00101111,B11011100,B00001000,
-      B00100111,B11101111,B11001000,
-      B00100000,B01110111,B11101000,
-      B00100000,B01111111,B11101000,
-      B00100000,B11110011,B11101000,
-      B00100001,B11110001,B11101000,
-      B00110011,B11110000,B11011000,
-      B00110111,B11110000,B01011000,
-      B00111001,B11100000,B00111000,
-      B00111110,B00000000,B11111000,
-      B00111111,B11111111,B11111000
-    };
-    const unsigned char status_fan2_bmp[] PROGMEM = {
-      B00111111,B11111111,B11111000,
-      B00111110,B10000000,B11111000,
-      B00111001,B10000000,B00111000,
-      B00110111,B10000001,B11011000,
-      B00110111,B11000011,B11011000,
-      B00100111,B11000111,B11101000,
-      B00100011,B11000111,B11111000,
-      B00100001,B11111111,B10001000,
-      B00100000,B01101100,B00001000,
-      B00100000,B01101100,B00001000,
-      B00100000,B01101100,B00001000,
-      B00100011,B11111111,B00001000,
-      B00111111,B11000111,B10001000,
-      B00101111,B11000111,B11001000,
-      B00110111,B10000111,B11011000,
-      B00110111,B00000011,B11011000,
-      B00111000,B00000011,B00111000,
-      B00111110,B00000010,B11111000,
-      B00111111,B11111111,B11111000
-    };
-    const unsigned char status_fan3_bmp[] PROGMEM = {
-      B00111111,B11111111,B11111000,
-      B00111110,B00000000,B11111000,
-      B00111001,B11110000,B00111000,
-      B00110001,B11100000,B00011000,
-      B00110001,B11100000,B00011000,
-      B00100001,B11100001,B11101000,
-      B00100000,B11110011,B11101000,
-      B00100000,B01111111,B11101000,
-      B00100000,B01110111,B11101000,
-      B00101000,B11101110,B00101000,
-      B00101111,B11011100,B00001000,
-      B00101111,B11111100,B00001000,
-      B00101111,B10011110,B00001000,
-      B00101111,B00001111,B00001000,
-      B00110000,B00001111,B00011000,
-      B00110000,B00001111,B00011000,
-      B00111000,B00011111,B00111000,
-      B00111110,B00000000,B11111000,
-      B00111111,B11111111,B11111000
-    };
+    #if ENABLED(STATUS_ALT_FAN_BITMAP)
+
+      const unsigned char status_fan0_bmp[] PROGMEM = {
+        B00000001,B11111111,B00000000,
+        B00000110,B00000000,B11000000,
+        B00001000,B00111111,B00100000,
+        B00010000,B01111110,B00010000,
+        B00010000,B01111100,B00010000,
+        B00101000,B01111100,B00001000,
+        B00101100,B00111000,B00001000,
+        B00101111,B00111001,B11001000,
+        B00101111,B11111111,B11101000,
+        B00101111,B11000111,B11101000,
+        B00101111,B11111111,B11101000,
+        B00100111,B00111001,B11101000,
+        B00100000,B00111000,B01101000,
+        B00100000,B01111100,B00101000,
+        B00010000,B01111100,B00010000,
+        B00010000,B11111100,B00010000,
+        B00001001,B11111000,B00100000,
+        B00000110,B00000000,B11000000,
+        B00000001,B11111111,B00000000
+      };
+      const unsigned char status_fan1_bmp[] PROGMEM = {
+        B00000001,B11111111,B00000000,
+        B00000110,B00000000,B11000000,
+        B00001000,B00001111,B00100000,
+        B00010100,B00011111,B11010000,
+        B00010110,B00011111,B10010000,
+        B00101111,B00011111,B00001000,
+        B00101111,B10011110,B00001000,
+        B00101111,B11111100,B00001000,
+        B00101111,B11011100,B00001000,
+        B00100111,B11101111,B11001000,
+        B00100000,B01110111,B11101000,
+        B00100000,B01111111,B11101000,
+        B00100000,B11110011,B11101000,
+        B00100001,B11110001,B11101000,
+        B00010011,B11110000,B11010000,
+        B00010111,B11110000,B01010000,
+        B00001001,B11100000,B00100000,
+        B00000110,B00000000,B11000000,
+        B00000001,B11111111,B00000000
+      };
+      const unsigned char status_fan2_bmp[] PROGMEM = {
+        B00000001,B11111111,B00000000,
+        B00000110,B10000000,B11000000,
+        B00001001,B10000000,B00100000,
+        B00010111,B10000001,B11010000,
+        B00010111,B11000011,B11010000,
+        B00100111,B11000111,B11101000,
+        B00100011,B11000111,B11111000,
+        B00100001,B11111111,B10001000,
+        B00100000,B01101100,B00001000,
+        B00100000,B01101100,B00001000,
+        B00100000,B01101100,B00001000,
+        B00100011,B11111111,B00001000,
+        B00111111,B11000111,B10001000,
+        B00101111,B11000111,B11001000,
+        B00010111,B10000111,B11010000,
+        B00010111,B00000011,B11010000,
+        B00001000,B00000011,B00100000,
+        B00000110,B00000010,B11000000,
+        B00000001,B11111111,B00000000
+      };
+      const unsigned char status_fan3_bmp[] PROGMEM = {
+        B00000001,B11111111,B00000000,
+        B00000110,B00000000,B11000000,
+        B00001001,B11110000,B00100000,
+        B00010001,B11100000,B00010000,
+        B00010001,B11100000,B00010000,
+        B00100001,B11100001,B11101000,
+        B00100000,B11110011,B11101000,
+        B00100000,B01111111,B11101000,
+        B00100000,B01110111,B11101000,
+        B00101000,B11101110,B00101000,
+        B00101111,B11011100,B00001000,
+        B00101111,B11111100,B00001000,
+        B00101111,B10011110,B00001000,
+        B00101111,B00001111,B00001000,
+        B00010000,B00001111,B00010000,
+        B00010000,B00001111,B00010000,
+        B00001000,B00011111,B00100000,
+        B00000110,B00000000,B11000000,
+        B00000001,B11111111,B00000000
+      };
+
+    #else // !STATUS_ALT_FAN_BITMAP
+
+      const unsigned char status_fan0_bmp[] PROGMEM = {
+        B00111111,B11111111,B11111000,
+        B00111110,B00000000,B11111000,
+        B00111000,B00111111,B00111000,
+        B00110000,B01111110,B00011000,
+        B00110000,B01111100,B00011000,
+        B00101000,B01111100,B00001000,
+        B00101100,B00111000,B00001000,
+        B00101111,B00111001,B11001000,
+        B00101111,B11111111,B11101000,
+        B00101111,B11000111,B11101000,
+        B00101111,B11111111,B11101000,
+        B00100111,B00111001,B11101000,
+        B00100000,B00111000,B01101000,
+        B00100000,B01111100,B00101000,
+        B00110000,B01111100,B00011000,
+        B00110000,B11111100,B00011000,
+        B00111001,B11111000,B00111000,
+        B00111110,B00000000,B11111000,
+        B00111111,B11111111,B11111000
+      };
+      const unsigned char status_fan1_bmp[] PROGMEM = {
+        B00111111,B11111111,B11111000,
+        B00111110,B00000000,B11111000,
+        B00111000,B00001111,B00111000,
+        B00110100,B00011111,B11011000,
+        B00110110,B00011111,B10011000,
+        B00101111,B00011111,B00001000,
+        B00101111,B10011110,B00001000,
+        B00101111,B11111100,B00001000,
+        B00101111,B11011100,B00001000,
+        B00100111,B11101111,B11001000,
+        B00100000,B01110111,B11101000,
+        B00100000,B01111111,B11101000,
+        B00100000,B11110011,B11101000,
+        B00100001,B11110001,B11101000,
+        B00110011,B11110000,B11011000,
+        B00110111,B11110000,B01011000,
+        B00111001,B11100000,B00111000,
+        B00111110,B00000000,B11111000,
+        B00111111,B11111111,B11111000
+      };
+      const unsigned char status_fan2_bmp[] PROGMEM = {
+        B00111111,B11111111,B11111000,
+        B00111110,B10000000,B11111000,
+        B00111001,B10000000,B00111000,
+        B00110111,B10000001,B11011000,
+        B00110111,B11000011,B11011000,
+        B00100111,B11000111,B11101000,
+        B00100011,B11000111,B11111000,
+        B00100001,B11111111,B10001000,
+        B00100000,B01101100,B00001000,
+        B00100000,B01101100,B00001000,
+        B00100000,B01101100,B00001000,
+        B00100011,B11111111,B00001000,
+        B00111111,B11000111,B10001000,
+        B00101111,B11000111,B11001000,
+        B00110111,B10000111,B11011000,
+        B00110111,B00000011,B11011000,
+        B00111000,B00000011,B00111000,
+        B00111110,B00000010,B11111000,
+        B00111111,B11111111,B11111000
+      };
+      const unsigned char status_fan3_bmp[] PROGMEM = {
+        B00111111,B11111111,B11111000,
+        B00111110,B00000000,B11111000,
+        B00111001,B11110000,B00111000,
+        B00110001,B11100000,B00011000,
+        B00110001,B11100000,B00011000,
+        B00100001,B11100001,B11101000,
+        B00100000,B11110011,B11101000,
+        B00100000,B01111111,B11101000,
+        B00100000,B01110111,B11101000,
+        B00101000,B11101110,B00101000,
+        B00101111,B11011100,B00001000,
+        B00101111,B11111100,B00001000,
+        B00101111,B10011110,B00001000,
+        B00101111,B00001111,B00001000,
+        B00110000,B00001111,B00011000,
+        B00110000,B00001111,B00011000,
+        B00111000,B00011111,B00111000,
+        B00111110,B00000000,B11111000,
+        B00111111,B11111111,B11111000
+      };
+
+    #endif // !STATUS_ALT_FAN_BITMAP
 
   #endif
 
@@ -1121,7 +1332,7 @@
   #endif
 
   #ifndef STATUS_BED_TEXT_X
-    #define STATUS_BED_TEXT_X (STATUS_BED_X + 8)
+    #define STATUS_BED_TEXT_X (STATUS_BED_X + 11)
   #endif
 
   static_assert(