microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

Fix line-endings, formatting, whitespace

Browse Source 
Followup to #12770
2.0.x
Scott Lahteine 6 years ago
parent 135c74017c
commit 371d9a1acf
5 changed files with 180 additions and 208 deletions
Show Stats Download Patch File Download Diff File

2
Marlin/Configuration_adv.h
Unescape Escape View File

@ -841,7 +841,7 @@
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
//#define STATUS_ALT_FAN_BITMAP // Use the alternate fan bitmap
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar

2
Marlin/src/module/configuration_store.cpp
Unescape Escape View File

@ -488,7 +488,7 @@ void MarlinSettings::postprocess() {
EEPROM_WRITE(dummy);
#endif
#else
const float planner_max_jerk[XYZE] = { float(DEFAULT_EJERK) };
const float planner_max_jerk[XYZE] = { float(DEFAULT_EJERK) };
EEPROM_WRITE(planner_max_jerk);
#endif

2
Marlin/src/pins/pins.h
Unescape Escape View File

@ -101,7 +101,7 @@
#elif MB(MKS_BASE)
#include "pins_MKS_BASE.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560
#elif MB(MKS_BASE_14)
#include "pins_MKS_BASE_14.h" // ATmega2560 env:megaatmega2560
#include "pins_MKS_BASE_14.h" // ATmega2560 env:megaatmega2560
#elif MB(MKS_BASE_15)
#include "pins_MKS_BASE_15.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560
#elif MB(MKS_BASE_HEROIC)

2
Marlin/src/pins/pins_DUPLICATOR_I3_PLUS.h
Unescape Escape View File

@ -141,7 +141,7 @@
* ##################################
*
* @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
*
*
* == Y-endstop == == Z-endstop == == Bed temperature ==
*
* 1 2 1 2 1 2

380
Marlin/src/pins/pins_MKS_BASE_14.h
Unescape Escape View File

@ -1,204 +1,176 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* MKS BASE v1.4
*/
#if HOTENDS > 2 || E_STEPPERS > 2
#error "MKS BASE 1.4 only supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_NAME "MKS BASE 1.4"
//
// Heaters / Fans
//
#define MOSFET_D_PIN 7 // PH4 ** Pin16 ** PWM7 //E1
#define FAN_PIN 9 // PH6 ** Pin18 ** PWM9
// Other Mods
#define CASE_LIGHT_PIN 11 // PB5 ** Pin24 ** PWM11
#define SERVO3_PIN 12 // PB6 ** Pin25 ** D12
#define PS_ON_PIN 2 // X+ // PE4 ** Pin6 ** PWM2 **MUST BE HARDWARE PWM
#define FILWIDTH_PIN 15 // Y+ // PJ0 ** Pin63 ** USART3_RX **Pin should have a pullup!
#define FIL_RUNOUT_PIN 19 // Z+ // PD2 ** Pin45 ** USART1_RX
//
// M3/M4/M5 - Spindle/Laser Control
//
#define SPINDLE_LASER_PWM_PIN 2 // X+ // PE4 ** Pin6 ** PWM2 **MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 15 // Y+ // PJ0 ** Pin63 ** USART3_RX **Pin should have a pullup!
#define SPINDLE_DIR_PIN 19 // Z+ // PD2 ** Pin45 ** USART1_RX
/**
* Microstepping pins
*/
#define X_MS1_PIN 5 // PE3 ** Pin5 ** PWM5
#define X_MS2_PIN 6 // PH3 ** Pin15 ** PWM6
#define Y_MS1_PIN 59 // PF5 ** Pin92 ** A5
#define Y_MS2_PIN 58 // PF4 ** Pin93 ** A4
#define Z_MS1_PIN 22 // PA0 ** Pin78 ** D22
#define Z_MS2_PIN 39 // PG2 ** Pin70 ** D39
#define E0_MS1_PIN 64 // PK2 ** Pin87 ** A10
#define E0_MS2_PIN 63 // PK1 ** Pin88 ** A9
#define E1_MS1_PIN 57 // PF3 ** Pin94 ** A3
#define E1_MS2_PIN 4 // PG5 ** Pin1 ** PWM4
#include "pins_RAMPS.h"
/*****************************************/
/* Available connectors on MKS BASE v1.4 */
/*****************************************/
/*
*******
* GND *
******* E0
* 10 *
*******
* GND *
******* E1
* 7 *
*******
* GND *
******* FAN
* 9 *
*******
10 // PB4 ** Pin23 ** PWM10
7 // PH4 ** Pin16 ** PWM7
9 // PH6 ** Pin18 ** PWM9
*******
* GND *
******* Heat Bed
* 8 *
*******
8 // PH5 ** Pin17 ** PWM8
**********
* 12-24V *
********** Power
* GND *
**********
XS3 Connector
*****************
* 65 * GND * 5V *
*****************
* 66 * GND * 5V *
*****************
65 // PK3 ** Pin86 ** A11
66 // PK4 ** Pin85 ** A12
Servos Connector
*****************
* 11 * GND * 5V *
*****************
* 12 * GND * 5V *
*****************
11 // PB5 ** Pin24 ** PWM11
12 // PB6 ** Pin25 ** PWM12
ICSP
*****************
* 5V * 51 * GND *
*****************
* 50 * 52 * RST *
*****************
50 // PB3 ** Pin22 ** SPI_MISO
51 // PB2 ** Pin21 ** SPI_MOSI
52 // PB1 ** Pin20 ** SPI_SCK
XS6/AUX-1 Connector
**********************
* 5V * GND * NC * 20 *
**********************
* 50 * 51 * 52 * 21 *
**********************
50 // PB3 ** Pin22 ** SPI_MISO
51 // PB2 ** Pin21 ** SPI_MOSI
52 // PB1 ** Pin20 ** SPI_SCK
20 // PD1 ** Pin44 ** I2C_SDA
21 // PD0 ** Pin43 ** I2C_SCL
Temperature
**********************************
* GND * 69 * GND * 68 * GND * 68 *
**********************************
69 // PK7 ** Pin82 ** A15
68 // PK6 ** Pin83 ** A14
67 // PK5 ** Pin84 ** A13
Limit Switches
************
* 2 * GND * X+
************
* 3 * GND * X-
************
* 15 * GND * Y+
************
* 14 * GND * Y-
************
* 19 * GND * Z+
************
* 18 * GND * Z-
************
2 // PE4 ** Pin6 ** PWM2 **X+
3 // PE5 ** Pin7 ** PWM3 **X-
15 // PJ0 ** Pin63 ** USART3_RX **Y+
14 // PJ1 ** Pin64 ** USART3_TX **Y-
19 // PD2 ** Pin45 ** USART1_RX **Z+
18 // PD3 ** Pin46 ** USART1_TX **Z-
EXP1
************
* 37 * 35 *
************
* 17 * 16 *
************
* 23 * 25 *
************
* 27 * 29 *
************
* GND * 5V *
************
37 // PC0 ** Pin53 ** D37
35 // PC2 ** Pin55 ** D35
17 // PH0 ** Pin12 ** USART2_RX
16 // PH1 ** Pin13 ** USART2_TX
23 // PA1 ** Pin77 ** D23
25 // PA3 ** Pin75 ** D25
27 // PA5 ** Pin73 ** D27
29 // PA7 ** Pin71 ** D29
EXP2
************
* 50 * 52 *
************
* 31 * 53 *
************
* 33 * 51 *
************
* 49 * 41 *
************
* GND * NC *
************
50 // PB3 ** Pin22 ** SPI_MISO
52 // PB1 ** Pin20 ** SPI_SCK
31 // PC6 ** Pin59 ** D31
53 // PB0 ** Pin19 ** SPI_SS
33 // PC4 ** Pin57 ** D33
51 // PB2 ** Pin21 ** SPI_MOSI
49 // PL0 ** Pin35 ** D49
41 // PG0 ** Pin51 ** D41
*/
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* MKS BASE v1.4
*/
#if HOTENDS > 2 || E_STEPPERS > 2
#error "MKS BASE 1.4 only supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_NAME "MKS BASE 1.4"
//
// Heaters / Fans
//
#define MOSFET_D_PIN 7 // PH4 ** Pin16 ** PWM7 //E1
#define FAN_PIN 9 // PH6 ** Pin18 ** PWM9
// Other Mods
#define CASE_LIGHT_PIN 11 // PB5 ** Pin24 ** PWM11
#define SERVO3_PIN 12 // PB6 ** Pin25 ** D12
#define PS_ON_PIN 2 // X+ // PE4 ** Pin6 ** PWM2 **MUST BE HARDWARE PWM
#define FILWIDTH_PIN 15 // Y+ // PJ0 ** Pin63 ** USART3_RX **Pin should have a pullup!
#define FIL_RUNOUT_PIN 19 // Z+ // PD2 ** Pin45 ** USART1_RX
//
// M3/M4/M5 - Spindle/Laser Control
//
#define SPINDLE_LASER_PWM_PIN 2 // X+ // PE4 ** Pin6 ** PWM2 **MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 15 // Y+ // PJ0 ** Pin63 ** USART3_RX **Pin should have a pullup!
#define SPINDLE_DIR_PIN 19 // Z+ // PD2 ** Pin45 ** USART1_RX
//
// Microstepping pins
//
#define X_MS1_PIN 5 // PE3 ** Pin5 ** PWM5
#define X_MS2_PIN 6 // PH3 ** Pin15 ** PWM6
#define Y_MS1_PIN 59 // PF5 ** Pin92 ** A5
#define Y_MS2_PIN 58 // PF4 ** Pin93 ** A4
#define Z_MS1_PIN 22 // PA0 ** Pin78 ** D22
#define Z_MS2_PIN 39 // PG2 ** Pin70 ** D39
#define E0_MS1_PIN 64 // PK2 ** Pin87 ** A10
#define E0_MS2_PIN 63 // PK1 ** Pin88 ** A9
#define E1_MS1_PIN 57 // PF3 ** Pin94 ** A3
#define E1_MS2_PIN 4 // PG5 ** Pin1 ** PWM4
#include "pins_RAMPS.h"
/*
Available connectors on MKS BASE v1.4
=======
| GND |
|-----| E0
| 10 | (10) PB4 ** Pin23 ** PWM10
|-----|
| GND |
|-----| E1
| 7 | ( 7) PH4 ** Pin16 ** PWM7
|-----|
| GND |
|-----| FAN
| 9 | ( 9) PH6 ** Pin18 ** PWM9
=======
=======
| GND |
|-----| Heated Bed
| 8 | ( 8) PH5 ** Pin17 ** PWM8
=======
==========
| 12-24V |
|--------| Power
| GND |
==========
XS3 Connector
=================
| 65 | GND | 5V | (65) PK3 ** Pin86 ** A11
|----|-----|----|
| 66 | GND | 5V | (66) PK4 ** Pin85 ** A12
=================
Servos Connector
=================
| 11 | GND | 5V | (11) PB5 ** Pin24 ** PWM11
|----|-----|----|
| 12 | GND | 5V | (12) PB6 ** Pin25 ** PWM12
=================
ICSP
=================
| 5V | 51 | GND | (51) PB2 ** Pin21 ** SPI_MOSI
|----|----|-----|
| 50 | 52 | RST | (50) PB3 ** Pin22 ** SPI_MISO
================= (52) PB1 ** Pin20 ** SPI_SCK
XS6/AUX-1 Connector
======================
| 5V | GND | NC | 20 | (20) PD1 ** Pin44 ** I2C_SDA
|----|-----|----|----|
| 50 | 51 | 52 | 21 | (50) PB3 ** Pin22 ** SPI_MISO
====================== (51) PB2 ** Pin21 ** SPI_MOSI
(52) PB1 ** Pin20 ** SPI_SCK
(21) PD0 ** Pin43 ** I2C_SCL
Temperature
==================================
| GND | 69 | GND | 68 | GND | 67 |
==================================
(69) PK7 ** Pin82 ** A15
(68) PK6 ** Pin83 ** A14
(67) PK5 ** Pin84 ** A13
Limit Switches
============
| 2 | GND | X+ ( 2) PE4 ** Pin6 ** PWM2
|----|-----|
| 3 | GND | X- ( 3) PE5 ** Pin7 ** PWM3
|----|-----|
| 15 | GND | Y+ (15) PJ0 ** Pin63 ** USART3_RX
|----|-----|
| 14 | GND | Y- (14) PJ1 ** Pin64 ** USART3_TX
|----|-----|
| 19 | GND | Z+ (19) PD2 ** Pin45 ** USART1_RX
|----|-----|
| 18 | GND | Z- (18) PD3 ** Pin46 ** USART1_TX
============
EXP1
============
| 37 | 35 | (37) PC0 ** Pin53 ** D37
|-----|----| (35) PC2 ** Pin55 ** D35
| 17 | 16 | (17) PH0 ** Pin12 ** USART2_RX
|-----|----| (16) PH1 ** Pin13 ** USART2_TX
| 23 | 25 | (23) PA1 ** Pin77 ** D23
|-----|----| (25) PA3 ** Pin75 ** D25
| 27 | 29 | (27) PA5 ** Pin73 ** D27
|-----|----| (29) PA7 ** Pin71 ** D29
| GND | 5V |
============
EXP2
============
| 50 | 52 | (50) PB3 ** Pin22 ** SPI_MISO
|-----|----| (52) PB1 ** Pin20 ** SPI_SCK
| 31 | 53 | (31) PC6 ** Pin59 ** D31
|-----|----| (53) PB0 ** Pin19 ** SPI_SS
| 33 | 51 | (33) PC4 ** Pin57 ** D33
|-----|----| (51) PB2 ** Pin21 ** SPI_MOSI
| 49 | 41 | (49) PL0 ** Pin35 ** D49
|-----|----| (41) PG0 ** Pin51 ** D41
| GND | NC |
============
*/

Write Preview
Loading…
Cancel
Save