ea0dbee3c9
Enable ABL by type, support bilinear on cartesian
8 years ago
9cebbabd05
Merge pull request #4893 from thinkyhead/rc_stat_led_check
...
Define status LED pins without condition
8 years ago
5fff8d148b
Clean up digital pots and microsteps
8 years ago
570676d265
Include requirements in "Implemented Codes"
8 years ago
cb48292338
Use fastio for literal pins
8 years ago
07703d2bd6
Use _PIN suffix on some pins
8 years ago
203e519bf4
Sanity check for status LED pins
8 years ago
ba43277429
Always define status LED pins
8 years ago
ad691022d7
Fix up spacing in A4JP pins
8 years ago
fba0b67f7d
Rename status led pins
8 years ago
9d86c07702
Clean up some fastio.h spacing
8 years ago
ab84ed22ca
No such thing as G6 and G7 pins
8 years ago
c2f13be750
Mightyboard Revision E
8 years ago
041d127cd3
Match bltouch test in do_homing_move with new code
8 years ago
16461900c2
Fix for HEATERS_PARALLEL
8 years ago
1583d37edd
Comment on M851 case
8 years ago
076f3a8284
unsigned char => uint8_t
8 years ago
8935bed594
MIDDLE_DEAD_ZONE => MIDDLE_DEAD_ZONE_R
8 years ago
6cf0952bf9
Merge pull request #4887 from thinkyhead/rc_autumn_fixups
...
Improve MINIMUM_STEPPER_PULSE
8 years ago
8061f1fac9
Merge pull request #4888 from thinkyhead/fix_warnings_etc
...
Suppress warnings, fix nonlinear_z_offset
8 years ago
7bdc58a818
Suppress warnings, fix nonlinear_z_offset
8 years ago
eabff30e75
Improve MINIMUM_STEPPER_PULSE
8 years ago
3ed8f8331c
Update Japanese translation
...
・Add new translation
8 years ago
da1644313d
Merge pull request #4883 from esenapaj/Follow-up-the-PR-#4860
...
Follow-up the PR #4860 (Fix BLTOUCH string and SERVO_DELAY)
8 years ago
903b8bb60c
No need for auto_bed_leveling_was_enabled
8 years ago
ee60225c07
Follow-up the PR #4860 (Fix BLTOUCH string and SERVO_DELAY)
8 years ago
0951bffcc0
Sanity check homing bumps
8 years ago
a9a21db39f
No homing bump if bump distance is 0 (or less)
8 years ago
2b4da57ea7
Patch Z safe homing for probe Z homing
8 years ago
c6dd539c84
Print error for M42 bad pin
8 years ago
8b399610fb
Skip raw moves to current position
8 years ago
22ece0081e
Pass array pointer to unapply_leveling
8 years ago
cbc158eb62
Add a proper flag for ABL enabled
8 years ago
666e944336
Init xProbe/yProbe for compiler
8 years ago
2c52e6ecf4
Clean up G28 MBL code
8 years ago
0bf1054bb2
Patch do_homing_move for SCARA
8 years ago
6ad0da661c
Report position in G92
8 years ago
199a7b5dd5
Tweak SCARA debugging
8 years ago
865ad25781
Fix prepare_kinematic_move_to precision
8 years ago
85e607153b
Improve kinematic optimization options
8 years ago
2846531f0b
const argument in do_homing_move
8 years ago
cc639d7d9c
Less indentation in Stepper::isr
8 years ago
7dec8071b2
Always synchronize in Stepper::set_position
8 years ago
c6142aa2a1
Minor cleanups in Marlin_main.cpp
8 years ago
0427f3cc3b
Use memcpy/memset in planner
8 years ago
6b9bf8e8fe
Add Planner::sync_from_steppers
...
Use to sync the planner after an interrupted move (when not overriding
the logical position).
8 years ago
be11a8a938
Fix debug in Planner::buffer_line
8 years ago
b211df818e
Make movement functions more available
8 years ago
6335acbf5c
Patch bug in linear unapply_leveling
8 years ago
e8d5073a90
Use probe clearance for bump when homing Z with probe
8 years ago
dbe41245f1
Merge pull request #4821 from thinkyhead/rc_revert_to_raises
...
Z Raise/Clearance rather than Height
8 years ago
747a2257dd
Only deploy/stow BLTOUCH on downward move
8 years ago
e242946ac3
Patch G29 for linear leveling, reachable with probe
8 years ago
b800eb0fed
Add probe option to position_is_reachable
8 years ago
fafafcf9d1
Use unapply_leveling in set_current_from_steppers_for_axis
8 years ago
e69d1e2879
Homing/probing feedrate, comments
8 years ago
7d72ed688c
Revert motor_current_setting to `constexpr`
...
We should use `constexpr` wherever it makes sense, for its added benefits. See http://stackoverflow.com/questions/13346879/const-vs-constexpr-on-variables
8 years ago
145d9005d1
Fix BLTOUCH string and SERVO_DELAY
8 years ago
2b7cc27c37
Merge pull request #4840 from thinkyhead/rc_G2_G3_arc_r_method
...
Add support for G2/G3 with R parameter
8 years ago
e0e10e0e45
Merge pull request #4859 from thinkyhead/rc_kinematic_and_scara
...
Kinematic and SCARA patches
8 years ago
31f03c838a
Only deploy/stow BLTouch for Z axis
8 years ago
3913e04ac7
Add Delta kinematic optimization options
8 years ago
8e31640229
Optimize prepare_kinematic_move_to
8 years ago
fd9b8ae4d4
Use position_is_reachable in G29, M48
8 years ago
7194e4434f
SCARA support in position_is_reachable
8 years ago
1c5f9821c4
SCARA support in homeaxis
8 years ago
92b4459f6c
Simpler G92 for SCARA
8 years ago
46cc2e3f6a
Fix get_cartesian_from_steppers
8 years ago
435c3ed404
Patch SCARA_move_to_cal for coordinate space
8 years ago
5efb12e889
Simpler report_current_position for SCARA
8 years ago
83fc5e1540
No line_to_* functions with IS_KINEMATIC
8 years ago
59d39d7655
G0 direct move for SCARA
8 years ago
ad9d6870ed
SCARA support in do_blocking_move_to
8 years ago
8542ebcecd
prepare_move_to_destination_raw => prepare_uninterpolated_move_to_destination
8 years ago
f900f97611
Update sw endstops in set_axis_is_at_home
8 years ago
0d43cef1de
M206 for MORGAN_SCARA
8 years ago
e94cb7a380
MORGAN_SCARA kinematics
8 years ago
890bade2fa
Additions, mods to SCARA config
8 years ago
01f1028510
Try on "CLEARANCE" for size
8 years ago
0e7d638a7a
Revert to Probe Raise rather than Probe Height
8 years ago
51e42a2d77
Adjust BLTouch probe behavior
...
Addressing #4855
- Have the pin deploy only immediately before probing
- Have the pin retract immediately after every probe
8 years ago
13523cbf29
Fix and extend BLTouch support
8 years ago
5cbed13f41
'constexpr' => 'const' for PWM_MOTOR_CURRENT
8 years ago
7ae351c92f
Merge pull request #4842 from thinkyhead/rc_DISABLE_Z_MIN_PROBE_ENDSTOP_whassup
...
Drop DISABLE_Z_MIN_PROBE_ENDSTOP, clean up probe config
8 years ago
ba94c89e21
Merge pull request #4852 from esenapaj/Fix-for-advance-extrusion-algorithms
...
Fix for advance extrusion algorithms
8 years ago
954563d603
Adjust spacing
8 years ago
7e9576dc5b
Extend the e_steps[] from int to long for allowing more than 32,767 E steps
...
Probably needed for long straight lines when using high microstepping
8 years ago
b04ed8f9c3
Fix inverted stepper signal of ADVANCED and LIN_ADVANCED
8 years ago
8692748ecd
Fix broken direction signal of ADVANCED and LIN_ADVANCED
...
Remove a setting proccess of E direction in advance_isr()
8 years ago
e9ce42353e
Patch G29 for 3-point leveling
8 years ago
c2744d8a8b
Add support for G2/G3 with R parameter
8 years ago
e05af606a8
Clean up probe config options
8 years ago
153e240cdd
Probe conditionals to Conditionals_LCD.h
8 years ago
ff38a3c3b1
Use SD Detect Pin 53 for 3DRAG, K8200, and K8400
...
See #4316
8 years ago
f38a33a5d8
Add handling of BLTouch error state
8 years ago
c4dcfa254e
Allow override of Z_ENDSTOP_SERVO_NR with BLTOUCH
8 years ago
7d9ebda478
Remove redundant servo probe sanity check
8 years ago
f0beae7641
Fix stupid, stupid, stupid oversight in G29 update
...
Mea culpa!
8 years ago
77639672d7
Move NONLINEAR bed leveling to planner
...
This is in advance of moving non-linear bed leveling to the planner
class.
8 years ago
9429c7db89
Use ABC indices in delta[]
8 years ago
5f2f991192
Use 'logical' rather than 'target' or 'cartesian'
8 years ago
40d3e854f6
Remove redundant extern delta[]
8 years ago
2ebfbc4c8d
Merge pull request #4836 from thinkyhead/rc_some_comments
...
Some comments, const args, debug output tweaks
8 years ago
e5505e3b33
Allow non-square leveling grid
8 years ago
2fc9ad6657
Use const ref args in probe_pt
8 years ago
2c2688d7ad
Adjust comments, spacing
8 years ago
b9d19b0008
Tweak extrapolate_one_point
8 years ago
3c0b591935
Fix nozzle position description
8 years ago
18d8dd4c0f
set_current_from_steppers_for_axis const arg
8 years ago
edfaf1c582
Stepper::report_positions patch
8 years ago
d1f4c3d73b
Patch sync_plan_position comment
8 years ago
0c25af30d4
Document homeaxis
8 years ago
e7882e45e3
Document set_axis_is_at_home
8 years ago
fef959c31a
Merge pull request #4834 from thinkyhead/rc_code_bool
...
Standardize code_value_bool
8 years ago
07ac9a1152
Merge pull request #4822 from blubbfish/patch-3
...
Tweak some german language strings
8 years ago
661fe09ce7
Standardize code_value_bool
8 years ago
20e5140e75
Merge pull request #4833 from thinkyhead/rc_no_scara_axis_scaling
...
Remove SCARA axis_scaling
8 years ago
a501f430eb
Enable M0/M1 with Emergency Parser
8 years ago
cd8b22b527
Tweak some german language strings
...
Change some string to get a better wording in german
8 years ago
83a41c7ceb
Remove SCARA axis_scaling
8 years ago
d41eeb62af
Merge pull request #4781 from thinkyhead/rc_final_z_correction
...
Use simplified Z correction in G29 when possible
8 years ago
502150046c
Merge pull request #4805 from thinkyhead/rc_config_adjustment
...
Additional documentation of Configuration.h
8 years ago
a1812b55f6
Space out array values
8 years ago
d4599fd8ed
Comment patches to Configuration.h
8 years ago
723e983073
Default EXTRUDE_MAXLENGTH to 200mm
8 years ago
b08bd84f8e
Merge pull request #4806 from blubbfish/patch-2
...
Update language_de.h
8 years ago
7b8bfa4358
Update pins_TEENSYLU.h
8 years ago
829c8592f2
Update pins_TEENSY2.h
8 years ago
e0aee20327
Update pins_SAV_MKI.h
8 years ago
88d3fc0bcf
Update pins_PRINTRBOARD.h
8 years ago
4277221abb
Update pins_BRAINWAVE_PRO.h
8 years ago
b8ecbe9116
Update pins_BRAINWAVE.h
8 years ago
60f757077e
Update pins_5DPRINT.h
8 years ago
ff2b2d5939
Added missing translations
8 years ago
2b11c3274c
Update language_de.h
8 years ago
54e6d12382
Update language_de.h
...
@MarlinFirmware/language-team updated german languagefile to the latest english version
8 years ago
57564ae576
Use last probe point to correct Z when possible
8 years ago
e40646de42
Merge pull request #4803 from thinkyhead/rc_lcd_button_fix
...
Clear LCD button state, apply timer to all
8 years ago
29f224594c
Fix some regressive typos in G29
8 years ago
5ecc7d9f25
Clear LCD button state, apply timer to all
...
Addressing #3007
8 years ago
9b0931ef74
Apply fixed EXTRUDER_RUNOUT_PREVENT
8 years ago
b1a60e8954
Reformat, rearrange, tweak, and document
...
- Add comments to several functions
- Add an option to use Fast SQRT for Delta IK
- Group related functions together
- Outdent some leveling-related functions
8 years ago
61284cbd8c
Various code style adjustments
8 years ago
788a16fc46
Clean up serial out code
8 years ago
0e38bea79d
Shrink 3-point leveling code
8 years ago
4f75ce6957
Unify reset_bed_level for linear/non-linear
8 years ago
41d8149bce
Sanity check for more than 1 controller
8 years ago
40785ce8ac
Use count method for kinematic sanity check
8 years ago
3236762e07
Clean up sanity check for LCD_PROGRESS_BAR
8 years ago
a9ed23225f
bed_level => bed_level_grid
8 years ago
82be65065c
Fix up untilted_stepper_position and set_current_from_steppers_for_axis
8 years ago
d65f5d816f
Patch to fix kinematics
8 years ago
e529c6407e
Rename set_cartesian_from_steppers, cartesian_position
8 years ago
c109399bf6
Fix planner leveling and rename arguments
...
Use lx, ly, lz for “logical” positions
8 years ago
d4f21af6b3
sync_plan_position_delta => sync_plan_position_kinematic
8 years ago
acd1b6e9c0
Rename delta_grid spacing for general nonlinear
8 years ago
c5fa70809b
Implement M0/M1 for EMERGENCY_PARSER
8 years ago
786d1afb72
Add position_is_reachable, use in home_z_safely
8 years ago
b4034915f8
Move z safe homing to its own function
8 years ago
c84b14c77a
Move delta homing to its own function
8 years ago
f9a192c7e3
Move setup() and loop() to the end
8 years ago
8ff338c2b9
Patch stepper.h for SCARA
8 years ago
74d7f5e57b
Patch SCARA example config
8 years ago
6ab54c60b1
Add conditionals for kinematics, leveling
8 years ago
21514568fd
Add enum for ALL_AXES
8 years ago
413b61e64a
Add HYPOT2 and float comparison macros
8 years ago
a6f6ed352b
Fix comment on FILAMENT_RUNOUT_SENSOR
8 years ago
48e14d049a
Merge pull request #4710 from thinkyhead/rc_fix_leveling_maths
...
Bed leveling that accounts for home XYZ
8 years ago
416821a71c
Merge pull request #4765 from thinkyhead/rc_endstop_direction
...
Sanitycheck endstop plugs based on homing direction
8 years ago
9248cfb0ad
Bed leveling that accounts for home XYZ
8 years ago
6ac9d895ca
Tweak Filament Width variables
8 years ago
68ba45572e
Don't say "heating complete" unless done
8 years ago
2bfc6fe1b0
Move XYZ constants closer to the top
8 years ago
12b94e419f
Sanitycheck endstop plugs based on homing direction
8 years ago
29c4f67a29
Additional path - followup to #4743
8 years ago
494d5770b8
makefile fix for arduino 1.6.9 unzipped
8 years ago
6f71bd7372
Merge pull request #4754 from thinkyhead/rc_mixing_regression
...
Unify counter_m and counter_M
8 years ago
9bf78ef465
Fix capitalization of counter_m
8 years ago
42b5616327
Try bool for direction instead of long
8 years ago
cbe9ab902c
Merge pull request #4747 from thinkyhead/rc_sd_show_percent
...
Option to show SD percent on Graphical LCD
8 years ago
f20b2b21eb
Optimize LCD string/char printing
8 years ago
3b2f7ba225
Merge pull request #4748 from thinkyhead/rc_sd_print_timer
...
Patch duration_t toDigital method
8 years ago
445d8215e4
Option to show SD percent on Graphical LCD
8 years ago
d07a913f21
Tweak to stepper advance e_steps update
8 years ago
aaef7c6b89
Fix a misspelling of minimum
8 years ago
ad659b5f91
Merge pull request #4725 from thinkyhead/rc_log_machine_info
...
Log machine info in G28 and G29
8 years ago
c6859a1e54
Handle hours >= 100
8 years ago
9f706a9635
Patch duration_t toDigital method
8 years ago
c3caa42630
Merge pull request #4738 from thinkyhead/rc_ensure_floats
...
Optimize stepper ISRs, plus cleanup, shorthand
8 years ago
426f662586
Apply MINIMUM_STEPPER_PULSE in stepper advance_isr
8 years ago
8c7ee4599e
Optimize stepper advance_isr
8 years ago
9725bcd099
Minor "optimizations" in stepper ISR
8 years ago
4ec3d1ea58
Add some commentary to stepper ISR
8 years ago
d9bcc7bb45
Set a bool when a stepper block is done
8 years ago
08f717e5f7
Use bit-size typedefs for some stepper vars
8 years ago
d554c1dda8
Clean up planner kernel pass methods
8 years ago
b2e5ec85d7
Add [XYZ]_CENTER conditionals
8 years ago
7e20448a2d
Add HOMING_Z_WITH_PROBE conditional
8 years ago
0e4107da34
Minor cleanup of homeaxis, etc.
8 years ago
f1201e11c7
Improve the Jerk description
8 years ago
3f038bef00
Heading for movement settings
8 years ago
fd2269f489
Log machine info in G28 and G29
8 years ago
6eaf4f4909
Fix spacing of debug output in homeaxis
8 years ago
1e6d1c39ea
Improve verbiage of dropsegments sanity error
8 years ago
0729a8f08d
Use the probe travel height for pre-probe move
...
Instead of using the home_bump for Z to move close to the bed before doing a slow probe, use the probe travel height.
8 years ago
dd94d0b9d5
Fix bed probing bug without PROBE_DOUBLE_TOUCH
...
If `PROBE_DOUBLE_TOUCH` wasn't enabled, the probe move could be way too short! See #4701 for example.
8 years ago
35a0c46f16
Tweak debug output for probe in G29
8 years ago
a82a89bc58
Merge pull request #4722 from thinkyhead/rc_minimum_stepper_pulse
...
MINIMUM_STEPPER_PULSE option
8 years ago
a2572d2854
Fix Danish encoding and an error message
8 years ago
759234af60
MINIMUM_STEPPER_PULSE option
8 years ago
2cb63f0bf7
Merge pull request #4719 from thinkyhead/rc_delta_homing_patch
...
Marlin patches for homing, esp. Delta
8 years ago
8241cf9901
Merge pull request #4720 from thinkyhead/rc_allow_stepper_omission
...
Patch stepper.cpp to allow omitting steppers
8 years ago
7e893f4309
Merge pull request #4721 from thinkyhead/rc_temperature_isr_comments
...
Rc temperature isr comments
8 years ago
73d86098b7
Marlin patches for homing, esp. Delta
8 years ago
338bc768b1
Merge pull request #4717 from thinkyhead/rc_log_the_probe
...
Debug logging of nozzle type and offsets
8 years ago
fae92e3f3c
Merge pull request #4718 from thinkyhead/rc_twibus_patch_20160827
...
TWIBus patch for proper use of Wire.requestFrom
8 years ago
a485a19052
Added optional planner logging
8 years ago
e9bfca5870
Additional comments for Temperature::isr
8 years ago
a255945f29
Add DEBUG_ALL enum
8 years ago
a28e15399f
Patch stepper.cpp to allow omitting steppers
8 years ago
2b226bc5c2
TWIBus patch for proper use of Wire.requestFrom
8 years ago
d641344d3a
Remove redundant probe offset in homing
8 years ago
fb19a3cdec
Merge pull request #4649 from thinkyhead/rc_boelle_danish_update
...
Danish update (18 Aug 2016)
8 years ago
00638131e5
Debug logging of nozzle type and offsets
8 years ago
8e9ac72191
Merge pull request #4709 from thinkyhead/rc_log_the_reason
...
Log whether homing with probe or endstop
8 years ago
991a34aff2
Log whether homing with probe or endstop
8 years ago
3b93b79f5c
Merge pull request #4703 from bgort/RCBugFix
...
Add note suggesting RAMBo users use the RAMBo board type or platformio environment
8 years ago
00cdb15cec
Move invariant LCD strings to language.h
8 years ago
d2ae5b00d9
Danish up to date (18 Aug 2016)
8 years ago
e78274a7f4
Consistent order/formatting of pins files
8 years ago
11e9530111
Properly handle probe pin for BQ printers
8 years ago
1968983f35
Move PROBE_SELECTED to an earlier point
8 years ago
2fae32f35f
Add note suggesting RAMBo users use the RAMBo board type or platformio environment;
...
Add note that Viki 2.0 wiring diagram v1.2 has a mistake in it;
8 years ago
1749a7fae3
Suppress warning
8 years ago
d07d85ac9f
Ensure probe points at the delta edge are kept
8 years ago
7e36b76af2
Repair MarlinSerial with TX-buffer
...
These '{' are important to avoid the redefinition of `unsigned char _sreg = SREG;`
at the same level.
Used in
```
#define CRITICAL_SECTION_START unsigned char _sreg = SREG; cli();
```
8 years ago
1e65f1a1d8
Update french language
8 years ago
ab59280075
MIN_SEGMENTS_FOR_MOVE => MIN_STEPS_PER_SEGMENT
...
Follow-up to #4666
8 years ago
27b80b1dd1
Merge pull request #4667 from thinkyhead/rc_M211_sw_endstop_switch
...
M211: Enable/Disable Software Endstops
8 years ago
14a03727e1
Tweak serialprintPGM
8 years ago
2f223b8c79
Use ABC and XYZ for "3"
8 years ago
4cd1ad8f28
Adjustments to M209, G28, M605
8 years ago
e354cf5884
Apply sw_endstops_enabled to manual move
8 years ago
280534c06f
Add M211: Enable/Disable Software Endstops
8 years ago
01d4703429
PREVENT_DANGEROUS_EXTRUDE => PREVENT_COLD_EXTRUSION
...
Also improve the documentation of this and related options, and set
EXTRUDE_MINTEMP to 170 everywhere.
8 years ago
a1f6cf1e5d
Merge pull request #4665 from thinkyhead/rc_lcd_not_ultipanel
...
Clean up ultralcd code, dependencies on ULTIPANEL
8 years ago
1a255afa36
Merge pull request #4666 from thinkyhead/rc_dropsegments_adj
...
dropsegments => MIN_SEGMENTS_FOR_MOVE
8 years ago
374f8d2014
dropsegments => MIN_SEGMENTS_FOR_MOVE
8 years ago
76c3f326ff
Clean up DOGM code, comments
8 years ago
71319adbb8
Wrap ULTIPANEL-dependent code
8 years ago
305913545e
Move number-to-string function to utility.*
8 years ago
394c80c87b
Merge pull request #4655 from thinkyhead/rc_serial_static
...
Optimize, reduce size of MarlinSerial
8 years ago
28d1e5a946
Fix_Zig_Zag
8 years ago
14395a1a96
Optimize, reduce size of MarlinSerial
8 years ago
4d4c00d69c
Merge pull request #4651 from thinkyhead/rc_homing_vs_leveling_z
...
Improvements to homing / leveling
8 years ago
8fae3e1f9f
Add Rambo support/env to platformio.ini; properly maps extended pins
8 years ago
12d72363cb
Do Delta radius check without sqrt
8 years ago
044f800be9
Use SERIAL_PROTOCOLLNPGM in G28
8 years ago
d309a9647d
Include probe offset for moving "close to the bed"
8 years ago
35a08eeaeb
Use Z_HOME_DIR over axis_home_dir where we can
8 years ago
99b22d5785
Default AUTO_BED_LEVELING_GRID_POINTS to 3
8 years ago
9b1f3f7d12
Sanity-check DELTA + AUTO_BED_LEVELING_GRID_POINTS
8 years ago
733453569b
Merge pull request #4650 from thinkyhead/rc_percent_is_percent
...
extruder_multiplier => flow_percentage
8 years ago
55355a4fb8
Make probed points more symmetrical
8 years ago
1f776f6034
Tweak some code comments
8 years ago
748228cf40
Use named indices for delta_grid_spacing
8 years ago
ead333e7da
line_to_axis_pos => do_homing_move
8 years ago
7a4ccd7967
Add do_probe_move with Z fixes
8 years ago
a1bad589c9
Augment debug/homing logging
8 years ago
41b5c48129
Update software endstops if EEPROM is loaded
8 years ago
628dcbc764
extruder_multiplier => flow_percentage
8 years ago
d222ee4de2
Update language_ru.h
...
Updated missing translations. Caught up on change to MSG_HOME.
8 years ago
d63b8e2b2b
Additional details for I2C_SLAVE_ADDRESS
8 years ago
7427290d3a
Merge pull request #4634 from thinkyhead/rc_lang_disp_char
...
Set language display charset in language.h
8 years ago
aa30550b21
Keep SIMULATE_ROMFONT only language.h
8 years ago
cec61c350d
Set language display charset in language.h
8 years ago
165d7abb1b
Merge pull request #4625 from thinkyhead/rc_i2c_request_capture_flush
...
Add request, capture, flush to TWIBus
8 years ago
507784b846
Fix Messages length
8 years ago
bd928a69ec
Add request, capture, flush to TWIBus
8 years ago
7b7f319ed5
Update Spanish Lenguage
...
Adds missing messages
8 years ago
132322e4d9
Fix #4614 : currentScreen only defined with ULTIPANEL
8 years ago
dcd26b0403
Merge pull request #4621 from thinkyhead/rc_fan_set_output
...
Init PWM-able AUTO_FAN pins with SET_OUTPUT
8 years ago
79ba983782
Allow reply() to use const string with no warning
8 years ago
3a0a94b21a
Always init configured fan pins
8 years ago
c63003ed3e
Use matching auto-fan flags
8 years ago
3475fd7b0f
Init PWM-able auto fan pins with `SET_OUTPUT`
8 years ago
abf9696db1
Loop fan-pins based on array size
8 years ago
e88575c8ec
Init next_auto_fan_check_ms to zero
8 years ago
7272ec5608
Update HAS_FAN flags for 4 auto fans
8 years ago
7b21811a9a
Flags for matching auto-fans
8 years ago
97e0aed304
Further refinements of TWIBus
8 years ago
38fa1b1939
Merge pull request #4196 from cimbalo/Platformio_support
...
Add working PlatformIO support
8 years ago
d7edc039af
Merge pull request #4605 from thinkyhead/rc_3drag_fan_is_8
...
Fixup 3DRAG pins based on updated RAMPS pins
8 years ago
923388e0c7
Fix acceleration and feedrate following bq/Marlin
8 years ago
405afec393
Include decimeters in filamentUsed display
8 years ago
fef0e8ba86
Merge pull request #4610 from thinkyhead/rc_sd_pause_and_stop
...
Fix stopSDPrint so it works when paused
8 years ago
192ac2dfd7
Squish some CardReader code
8 years ago
61932b859e
Fix bug in CardReader::stopSDPrint
...
If the SD print is paused, it cannot be stopped
8 years ago
9e5d5a3b7c
Merge pull request #4597 from tnw513/italian_fix
...
Added hyphenated strings for full graphic display
8 years ago
f999292eea
added hyphenated letters for full graphic display and fixed some strings
8 years ago
67f119d18b
Add an i2c request handler
8 years ago
2d3db5b5bd
Fixup pins_3DRAG based on updated RAMPS pins
8 years ago
d29a64d4b3
Merge pull request #4603 from thinkyhead/rc_less_MSG_MOVE
...
Strip never-translated strings from language files
8 years ago
d6a7ca6553
Merge pull request #4584 from thinkyhead/rc_delta_cal_more
...
Use configured feedrates, center in DELTA_CALIBRATION_MENU
8 years ago
d3b432adca
Strip never-translated strings from language files
8 years ago
1a558ef486
Tweak MarlinSerial precursor
8 years ago
802818f7ab
Cleanup SdFatUtil.h
8 years ago
52560e257f
Merge pull request #4595 from thinkyhead/rc_i2c_slave
...
Add support for i2c slave address
8 years ago
432e9a1f50
Use configured feedrates, center for DELTA_CALIBRATION_MENU
8 years ago
cd496dd9bd
do_blocking_move_to can't be 'inline', takes const ref args
8 years ago
dd75fca4d9
Make M155 / M156 a bit more flexible
8 years ago
a99ecf71d8
Add support for i2c slave address
8 years ago
b63d70b186
Fix serial output for MBL, M303
8 years ago
a36a168af2
Use the truly configured middle on Delta
8 years ago
58c8e6cef2
Fixes #4576 : Convert filamentUsed to long for display
8 years ago
01f1f779a5
Followup to #4574 , specify L for long
8 years ago
1c7bd17e60
Update language_de.h with MSG_MOVE_E1 - E4
...
MSG_MOVE_E1 was missing
MSG_MOVE_E2 was missing
MSG_MOVE_E3 was missing
MSG_MOVE_E4 was missing
I assigned "0" to "MSG_MOVE_E1", "1" to "MSG_MOVE_E2" and so on, as this is what i assume to be the standard naming for the first (E0) and second (E1) extruder. This would have to be changed inthe other languages too :(
8 years ago
880cdb553b
Include days in Graphical LCD print timer
8 years ago
f4ac8c15e3
Merge pull request #4573 from thinkyhead/rc_mintemp_bed_later
...
Throw MINTEMP BED error only if heating
8 years ago
b7b5b50a84
Throw bed min temp error only if heating
8 years ago
d3ba878f70
Drop intermediate float in HEATER_0_USES_MAX6675 test
8 years ago
3e8f9ecd1c
Extend min/max_temp_error for the bed
8 years ago
1f15f0df5f
Merge pull request #4572 from thinkyhead/rc_digital_clock_100h
...
Show up to 99:59 in digital time
8 years ago
8100a4dace
Fix a compile error in EMERGENCY_PARSER sanity check
8 years ago
45f67164b6
Simplify the delay in kill()
8 years ago
30b1c731b5
Show up to 99:59 in digital time
8 years ago
3be4511230
Patch command order in delta calibration menu
8 years ago
9afa060ed6
Merge pull request #4570 from thinkyhead/rc_proper_delta_calibration
...
Make DELTA_CALIBRATION_MENU more universal
8 years ago
46c8862635
Merge pull request #4564 from AnHardt/max-spi-setup
...
MISO is an input
8 years ago
88540d8ecf
Fix: LCD displays SD status at startup
8 years ago
b16ea09498
Make DELTA_CALIBRATION_MENU more universal
8 years ago
3a56836ead
Always disable SLOWDOWN for DELTA/SCARA
8 years ago
aa9b52b2e7
MISO is an input
8 years ago
67c4acf750
Merge pull request #4562 from thinkyhead/rc_fix_z_dual_endstops
...
Fix Z_DUAL_ENDSTOPS with Z MIN Homing
8 years ago
e113740fa3
Specify that Z_PROBE_*_HEIGHT is nozzle-relative
8 years ago
462e189edd
Move pullups after Z_DUAL_ENDSTOPS block
8 years ago
367dad5902
Sanity check Z_DUAL_ENDSTOPS with DELTA
8 years ago
5fca110e0d
Fix Z_DUAL_ENDSTOPS with MIN homing
8 years ago
fc11f05c11
Merge pull request #4556 from thinkyhead/rc_all_feedrates_mm_s
...
Within Marlin, maintain most feed rates in mm/s
8 years ago
7b2abe6fc8
Use steps_to_mm in extruder runout prevent
8 years ago
d320065320
Within Marlin, maintain most feed rates in mm/s
8 years ago
ed0b50ebee
Merge pull request #4555 from thinkyhead/rc_mbl_index_rounding
...
Remove premature int-cast from MBL cell index methods
8 years ago
bad286d52f
Save CPU by multiplying by pre-compiled values
8 years ago
dce6026e0e
Remove premature cast to int
8 years ago
cffe77c537
Merge pull request #4553 from thinkyhead/rc_lcd_chars_save_ram
...
Save bytes for custom chars (Hitachi LCD)
8 years ago
42927530fe
Explicitly clear the screen in lcd_goto_screen
8 years ago
a6d2c2479f
Minor cleanup of lcd_goto_screen calls
8 years ago
e47c8b9829
Save bytes for custom chars (Hitachi LCD)
8 years ago
0ff5005c9b
Allow connector flexibility for BQ ZUM Mega
8 years ago
98437bd488
Allow override of CONTROLLERFAN_PIN with RAMPS EFF
8 years ago
93eafa1785
Use DISABLED to check TEENSY pin option
8 years ago
98392abb78
Clean warnings for pins_BQ_ZUM_MEGA_3D.h
8 years ago
98e96feee9
Repair SPI-pins
...
SCK_PIN can't be defined as DIO[number] they mus be defined as pure number.
So rebuilding the structure of fastio.h in pins.h.
8 years ago
a00783c41f
Format probe stowed test code
8 years ago
f37e8a31d7
Make Allen Key Probe stow
...
by switching off the tests for the probe before the stow move.
8 years ago
5347f39fce
Merge pull request #4542 from AnHardt/rep-de
...
Repair-language.de
8 years ago
5ef4a5577c
Merge pull request #4537 from thinkyhead/rc_fix_some_flaws
...
Patch up some flaws here and there
8 years ago
0d3b67a580
Repair-language.de
8 years ago
938e6d15c4
Patch up some flaws, here and there
8 years ago
3a3984e67a
Merge pull request #4535 from thinkyhead/rc_old_symbols_first
...
Move tests for old symbols to the top of sanity check
8 years ago
d7b882e430
Move tests for old symbols to the top of sanity check
8 years ago
479107d04f
Merge pull request #4530 from Kaibob2/patch-1
...
Added / Update language_de.h
8 years ago
1abd7fa670
Update language_de.h
...
Added german translation for MSG_INFO_PRINT_LONGEST and MSG_INFO_PRINT_FILAMENT.
MSG_HEATING_COMPLETE changed from "Aufgeheizt" to "Extr. aufgeheizt"
MSG_HEATING changed from "Aufheizen" to "Extr. aufheizen"
8 years ago
7e2bd9a233
Z_RAISE_PROBE_* => Z_PROBE_*_HEIGHT
8 years ago
445458c221
Don't include `zprobe_zoffset` in `do_probe_raise`
8 years ago
0114676953
Update of Galician language 2016-08-03
8 years ago
bd7a96ed42
Merge pull request #4517 from thinkyhead/rc_min_probe_pin
...
Define Z_MIN_PROBE_PIN always, allowing override
8 years ago
704ae1b737
Merge pull request #4516 from thinkyhead/rc_short_prints_quiet
...
Only report finished prints longer than 1 min
8 years ago
7ed70305df
Merge pull request #4515 from thinkyhead/rc_fix_speaker_tone
...
Prevent the 'tone(f,d)' function from being interrupted
8 years ago
f1be87a85c
Move probe pin sanity checks out of ABL block
8 years ago
9cb596e88c
Define Z_MIN_PROBE_PIN always, allowing override
8 years ago
229f70f194
Only report finished prints longer than 1 min
8 years ago
e040e00ae9
Merge pull request #4514 from thinkyhead/rc_cleanup_circularqueue
...
Patch up CircularQueue
8 years ago
6110d57c16
Prevent the 'tone(f,d)' function from being interrupted
8 years ago
b73203a0b7
Move some includes around to uncover missing deps
8 years ago
f26d5425bf
Patch up CircularQueue
...
- Use `size` and `count` instead of `length` and `size`
- Fix bug: `peek` should return the item
- Clean up comments, spacing, spelling
8 years ago
c9123adc59
Improved SCREEN / MENU macros
8 years ago
cebeb48005
Merge pull request #4511 from thinkyhead/rc_encoder_flex
...
Allow encoder pulse/step override for more LCDs
8 years ago
3cccaa9885
Allow encoder pulse/step override for more LCDs
8 years ago
14c5a46ee9
Use multiplication for MMM_SCALED
8 years ago
d8945e8464
Fix Z_HEAD index for COREYZ
8 years ago
0f030aface
Merge pull request #4503 from AnHardt/fix-retract
...
Correct typo in retract()
8 years ago
fbd8f06951
Merge pull request #4506 from thinkyhead/rc_buzzer_needs_beeper
...
Buzzer requires BEEPER_PIN
8 years ago
330f82971b
Buzzer requires BEEPER_PIN
8 years ago
e0d7b8bf27
Fix Azteeg X3 servo pin / Viki i2c
8 years ago
7cceb15925
Merge pull request #4505 from thinkyhead/rc_auto_select_dplugs
...
Auto-select power plugs for RAMPS derivatives
8 years ago
593b37519a
Boards with 4 power outputs are EFBF or EFBE
8 years ago
9ab94bd2c1
fix-babysrepping
8 years ago
39c4603598
Correct typo in retract.
8 years ago
cebd2bfff0
Auto-select power plugs for RAMPS derivatives
8 years ago
34c60f1b55
Merge pull request #4491 from thinkyhead/rc_fix_lcd_move_e
...
Use a default argument in _lcd_move_e
8 years ago
38af251b91
Use a default argument in _lcd_move_e
8 years ago
374ae6c099
Fix pins for RAMBO plus VIKI
8 years ago
7594138740
Merge pull request #4493 from jbrazio/buildroot-cleanup
...
Move font folder
8 years ago
6eed37aafb
Merge pull request #4486 from thinkyhead/rc_pid_add_extrusion_rate_off
...
PID_EXTRUSION_SCALING, disabled by default
8 years ago
4bf3526d00
Merge pull request #4463 from thinkyhead/rc_azteeg_x3_eeb
...
Wrangle RAMPS variants and derivatives
8 years ago
1993c45759
Merge pull request #4487 from thinkyhead/rc_refresh_pos_fix
...
Update refresh_positioning - no need for obj ref
8 years ago
f83369b79c
Update refresh_positioning - no need for obj ref
8 years ago
63fd1f49a6
PID_EXTRUSION_SCALING, disabled by default
8 years ago
49997e2e22
HI_VOLT_PIN => "RAMPS_Dn_PIN"
8 years ago
60ad365e21
repair-software-spi
8 years ago
f388beafa1
Merge pull request #4476 from otvald/RCBugFix
...
FIX for endstop adjustemt on delta is offset
8 years ago
3633d4978b
Merge pull request #4475 from esenapaj/Fix-for-PR-#4452
...
Fix for PR #4452 (Additional heater-state output changes)
8 years ago
fe059f1221
During homing, line_to_axis_pos will make a path which moves across the
...
endstop trigger point. The move is stopped at endstop, so current_position
should also be adjusted to reflect this!
Caused error in subsequent call in endstop adjustment, since the movement
would assume a wrong starting position.
8 years ago
bd73e6d3c8
Fix for PR #4452 (Additional heater-state output changes)
...
・Add missing ';'
8 years ago
cd5b03d88f
Update distribution date and readme
8 years ago
f575e92f2e
Merge pull request #4473 from esenapaj/Follow-up-the-PR-#4408-etc
...
Follow-up the PR #4408 (Add support for reprapworld LCD), etc
8 years ago
657ef8aded
Follow-up the PR #4408 (Add support for reprapworld LCD), etc
...
・Put #define REPRAPWORLD_GRAPHICAL_LCD into all the example
configuration files
・Adjust spacing
8 years ago
83d341c394
Make Conditionals.h a catch-all for old configs
8 years ago
de951c64f1
Make pins for EFF a consistent order
8 years ago
49f75b7891
pins_RAMPS_14.h => pins_RAMPS.h
8 years ago
d3b713cebc
Set flags for RAMPS "type" in pins.h
8 years ago
223b7e473f
RAMPS assignment for derivatives
8 years ago
3865843283
Consolidate setting of RAMPS High Voltage PWM outputs
8 years ago
bdac2eb13a
Don't set non-existent SLED_PIN
8 years ago
bfbd01e29a
Merge pull request #4470 from thinkyhead/rc_fix_manual_move
...
Followup to #4468
8 years ago
802d873fc1
Merge pull request #4469 from esenapaj/Fix-for-PR-#4453
...
Fix for PR #4453 (Improved MANUAL_[XYZ]_HOME_POS)
8 years ago
8e2f095dde
Merge pull request #4456 from jbrazio/speaker-type3
...
Improvement to non-blocking speaker
8 years ago
ad68b4cb8b
Followup to #4468
8 years ago
b8c112c490
Fix for PR #4453 (Improved MANUAL_[XYZ]_HOME_POS)
8 years ago
2f76138645
Merge pull request #4468 from thinkyhead/rc_fix_manual_move
...
Specify manual-movable E axes by extruder type
8 years ago
696b63e300
Specify manual-movable E axes by extruder type
8 years ago
46c33f1cfa
Merge pull request #4467 from jbrazio/safe_delay-millis_t
...
Makes safe_delay() to be fully compatible with delay()
8 years ago
9e21b2e51d
Merge pull request #4455 from AnHardt/double-bump-feature
...
double bump probing as a feature
8 years ago
db4d03bc81
Merge pull request #4452 from thinkyhead/rc_fix_heaterstates_part_2
...
Additional heater-state output changes
8 years ago
c68ca95345
Merge pull request #4464 from thinkyhead/rc_fix_steps_per_mm_handling
...
Account for DELTA in Planner::refresh_positioning
8 years ago
226e74a438
Fixes safe_delay() to be fully compatible with delay()
8 years ago
8e79e8cdb3
Adds types.h
8 years ago
844a4e799e
Account for DELTA in Planner::refresh_positioning
8 years ago
7188ce0ad6
double bump probing as a feature
...
Why double touch probing is not a good thing.
It's widely believed we can get better __probing__ results when using a double touch when probing.
Let's compare to double touch __homing__.
Or better let's begin with single touch __homing__.
We home to find out out position, so our position is unknown.
To find the endstop we have to move into the direction of the endstop.
The maximum way we have to move is a bit longer than the axis length.
When we arrive at the endstop - when it triggers, the stepper pulses are stopped immediately.
It's a sudden stop. No smooth deacceleration is possible.
Depending on the speed and the moving mass we lose steps here.
Only if we approached slow enough (below jerk speed?) we will not lose steps.
Moving a complete axis length, that slow, takes for ever.
To speed up homing, we now make the first approach faster, get a guess about our position,
back up a bit and make a second slower approach to get a exact result without losing steps.
What we do in double touch probing is the same. But the difference here is:
a. we already know where we are
b. if the first approach is to fast we will lose steps here to.
But this time there is no second approach to set the position to 0. We are measuring only.
The lost steps are permanent until we home the next time.
So if you experienced permanently rising values in M48 you now know why. (Too fast, suddenly stopped, first approach)
What can we do to improve probing?
We can use the information about our current position.
We can make a really fast, but deaccelerated, move to a place we know it is a bit before the trigger point.
And then move the rest of the way really slow.
8 years ago
c31f56a38c
Deprecate EXTRUDER_WATTS and BED_WATTS
8 years ago
e1970b4b28
Show power output in same order as temp output
8 years ago
74df828acc
Show ADC values inline rather than after
8 years ago
2b5faa61e2
Consolidates Buzzer and Speaker into a single object
8 years ago
8093c5f534
Non-blocking speaker now uses arduino's tone()
8 years ago
8896f08074
Fixes a compilation error introduced by #4448
8 years ago
ea5ac94804
Improved MANUAL_[XYZ]_HOME_POS
...
No need for `MANUAL_HOME_POSITIONS`. Just set each one as-needed to
override the automatic behavior.
8 years ago
b40661cb18
Fix output of heater states
8 years ago
9083e5420a
Merge pull request #4419 from AnHardt/sd2pinmap
...
Switch Sd2CardLib to fastio
8 years ago
6f59560526
Merge pull request #4448 from jbrazio/speaker-followup
...
A little cleanup at speaker.h
8 years ago
c94b6dd3e7
Revert to SanityCheck on every .cpp file
8 years ago
256b03598d
Merge pull request #4450 from thinkyhead/rc_fix_delta_optimization
...
Fix DELTA speed calculation
8 years ago
753283e020
inverse_second => inverse_mm_s
8 years ago
83e1d90ca3
Undo errant optimization of block->millimeters
8 years ago
909e98b1af
A little cleanup at speaker.h
8 years ago
ae1c7bca1b
Merge pull request #4445 from thinkyhead/rc_fix_rdfgsc_mega3
...
Fix for R.D.F.G.S.C. with MEGATRONICS 3 board
8 years ago
03fdb26cd2
Wrangle encoder bits, LCD_CLICKED
8 years ago
155def24c6
BLEN_A, B, C are defined in ultralcd headers
8 years ago
42dcc3bf50
Remove "the click" comments
8 years ago
0eba65f96b
Fix for R.D.F.G.S.C. with MINITRONICS board
8 years ago
83d0d59303
Fix for R.D.F.G.S.C. with MEGATRONICS 3 board
...
The support for reprapworld LCD boke the code for the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER. See Full Grapics Display does not work any more after #4408 #4439
8 years ago
4f191a384b
Moves the font folder into the buildroot
8 years ago
5367d56f87
Merge pull request #4434 from thinkyhead/rc_delta_safe_homing
...
DELTA should ignore Z_SAFE_HOMING
8 years ago
2525528fb2
DELTA should ignore Z_SAFE_HOMING
8 years ago
ab4b2a66ff
Allow zero Z_RAISE_BETWEEN_PROBINGS
8 years ago
8953e3e984
Allow Z_SAFE_HOMING without a probe
8 years ago
e4942d2163
Switch SD2cadrLib to fastio
...
Replace all fastDigitalRead/Write() with READ/WRITE()
Define SCK_PIN, MISO_PIN, MOSI_PIN in pins.h if not already defined in the pins_*.h files.
Remove these conditional pin definitions from the pin-files. They are now always defined.
Define separate sets of SPI-pins for AT90USB with and without Teensy support in fastio.h.
Likely this was the main reason for all that confusion about the AT90USB-SPI pins.
8 years ago
21e744c454
Allow zero raise for deploy/stow
8 years ago
54084612fd
Merge pull request #4415 from petrzjunior/transl
...
[LANGUAGE] Update Czech (Info screen strings)
8 years ago
5597400cda
Merge pull request #4414 from thinkyhead/rc_split_conditionals
...
Split up Conditionals.h into two files
8 years ago
4be635ec6e
Remove MSG_PRINT_TIME from languages
8 years ago
3be49881c0
Make SanityCheck.h a catch-all for obsolete configs
8 years ago
fa647cca23
Do the sanity check just once per build
8 years ago
24a1a16e5d
Move versioning to MarlinConfig.h
8 years ago
7e70a0b05d
Move pins / Arduino includes to MarlinConfig.h
8 years ago
d9f7ed9a3c
Move some macros from Marlin.h to macros.h
8 years ago
277899c175
Move include _Bootscreen.h where needed
8 years ago
83c4653c71
Include boards and macros ahead of configs
8 years ago
5f4702ecb2
Make Conditionals.h a catch-all for old configs
8 years ago
8a44928df3
Make Conditionals.h a catch-all for old configs
8 years ago
3d9b878cf0
Czech update
8 years ago
c6226bb0aa
Unify config in a single include without nested includes
8 years ago
2d378fac1b
No need to include thermistortables.h in Configuration.h
8 years ago
df27d01cd9
Arrange needed includes in Marlin.h
8 years ago
93ea281061
Split up Conditionals.h into two files
...
Rather than include twice, which is tricky but may confuse
8 years ago
8684570f68
Merge pull request #4412 from thinkyhead/rc_followup_4402
...
Followup #4402 fixing 3-point leveling
8 years ago
c55b7d0750
Merge pull request #4405 from thinkyhead/rc_theres_always_something
...
Move HAS_DIGIPOTSS to Conditionals.h
8 years ago
42eebcd518
Merge pull request #4409 from thinkyhead/rc_cleanup_comment
...
Clean up Transfer Buffer Size comment
8 years ago
5272147f7c
Followup #4402 fixing 3-point leveling
8 years ago
fcc39e2b5f
Clean up Transfer Buffer Size comment
8 years ago
0c0a63322b
Patches to prepare REPRAPWORLD_GRAPHICAL_LCD
8 years ago
a60a668f6b
Support for REPRAPWORLD_GRAPHICAL_LCD
8 years ago
4f2ff46ab9
Move HAS_DIGIPOTSS to conditionals
8 years ago
54f4f80077
Merge pull request #4404 from thinkyhead/rc_better_stepper_indirection
...
Arrange stepper_indirection by axis
8 years ago
169c21b477
Merge pull request #4402 from thinkyhead/rc_consistent_positioning
...
Account for coordinate space offsets
8 years ago
750a1e5116
Arrange stepper_indirection by axis
8 years ago
7c27f34996
Merge pull request #4397 from thinkyhead/rc_tweak_eeprom
...
Neaten up EEPROM read/write functions
8 years ago
2595a40a61
Account for coordinate space more in G28 / G29 / M48
8 years ago
060dc6d95a
Neaten up EEPROM read/write functions
8 years ago
b7b7c90477
Merge pull request #4389 from thinkyhead/rc_optimize_planner
...
Optimize planner with precalculation, etc.
8 years ago
6900bb2286
Merge pull request #4395 from tnw513/italian_fix
...
Update Italian translations. Remove trailing spaces.
8 years ago
e4816293a8
serial_echopair_P for uint16_t
8 years ago
d8e5af6834
Use RAW_POSITION for MBL in planner.set_position_mm
8 years ago
b183442c61
Fix inactive_extruder_x_pos for coordinate space
8 years ago
f75b0c2ee1
Make POSITION macros global
8 years ago
101b60ef42
Tweak Dual X Carriage data spacing
8 years ago
1fe60b723f
Merge pull request #4400 from thinkyhead/rc_sanity_check_temp_sensor
...
Sanity check for too many temp sensors
8 years ago
bedda3be61
Patch generic delta error caught by sanity check
8 years ago
a5212bf277
Sanity check for too many temp sensors
8 years ago
d8f2876753
Replace some float division with multiplication
8 years ago
ddde785b37
Code formatting in planner.cpp
8 years ago
f8b5749235
Replace division in planner with multiplication
8 years ago
b921f6b69d
Optimize calculation of block->millimeters for DELTA
8 years ago
db5df9500b
Move sync_plan_position closer to the top
8 years ago
2839c56f5a
Merge pull request #4390 from jbrazio/duration_t
...
Renamed timestamp_t to duration_t
8 years ago
d6c50671d3
Sanitycheck: Z_SAFE_HOMING points are reachable
8 years ago
a6203366b6
Sanitycheck: Z_SAFE_HOMING requires a probe
8 years ago
bbe5b80492
Always define probe limits if there is a probe
8 years ago
950397f2a0
Added missing translations. Removed trailing spaces for consistency ( #4376 )
8 years ago
50fb0f7cec
M31 serial output is now always in EN
8 years ago
62d96d72f3
Renamed timestamp_t to duration_t
8 years ago
3e2b3353b0
Fix axis indices for COREYZ
8 years ago
c287846f46
Merge pull request #4387 from thinkyhead/rc_anhardt_more_4370
...
Update Z in a unified way in run_z_probe
8 years ago
22d0654fe6
Merge pull request #4382 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
8 years ago
bb93b6822a
Use set_current_from_steppers_for_axis
8 years ago
96a162beda
Use implications from #4370 in run_z_probe()
...
See also https://github.com/MarlinFirmware/Marlin/pull/4370#issuecomment-234713680
8 years ago
4e67a85a5d
Macros to loop over axes
8 years ago
784be56e99
Follow-up the PR #4353 (General cleanup: enum)
...
・Update description of M111
8 years ago
3c11977558
Update Japanese translation
...
・Add translation
・Change translation
・Remove translation
8 years ago
08459a003f
Undo the self-sabotage that is do_blocking_move_to_axis_pos
8 years ago
d32c4056ad
Fix for the PR #4379 (Additional logging of do_blocking_move_to)
...
・Remove unneeded PSTR()
8 years ago
8099ee51a5
Merge pull request #4379 from thinkyhead/rc_blocking_move_logging
...
Additional logging of do_blocking_move_to
8 years ago
8633b644cf
Merge pull request #4378 from thinkyhead/rc_debug_leveling_docs
...
Document DEBUG_LEVELING_FEATURE
8 years ago
ad16d5019e
Additional logging of do_blocking_move_to
8 years ago
bb9da6ebdd
Document DEBUG_LEVELING_FEATURE
8 years ago
652fd8a826
Merge pull request #4362 from thinkyhead/rc_duplication_mode
...
DUAL_NOZZLE_DUPLICATION_MODE
8 years ago
1766b990b8
Merge pull request #4376 from jbrazio/timestamp_t-short
...
Adds short format to timestamp_t
8 years ago
6da3729531
Merge pull request #4370 from thinkyhead/rc_delta_fwd_kinematics
...
Delta Forward Kinematics (and LOGICAL_POSITION)
8 years ago
9e5dbf67e8
Update the stats menu to include longest job and extruded filament
8 years ago
86d9311495
Rework LCD implementation to use timestamp_t
8 years ago
b3eb0c8569
Add LOGICAL_POSITION macro, apply to kinematics
8 years ago
35a610abf9
const arg to inverse_kinematics
8 years ago
b4aad85c9a
Rework stats menu to use timestamp_t
8 years ago
ecd48027fa
Adds short timestamp format to timestamp_t
8 years ago
b6afa028f4
Don't call adjust_delta on SCARA
8 years ago
d5e2d523c7
Generalize kinematics function names
8 years ago
9c4ad7d7ef
Clean up delta declarations in Marlin_main.cpp
8 years ago
4b1725628b
Move kinematic functions to "private" scope
8 years ago
cde068ea42
Use set_current_from_steppers in quickstop_stepper
8 years ago
9f30cc84ce
Use set_current_from_steppers for other kinematics
8 years ago
5db9b940ee
Use forwardKinematics in DELTA run_z_probe()
8 years ago
b5a9647fec
Use `ENABLED` in `stepper_indirection.h`
8 years ago
cbc7f22ad9
Implement DUAL_NOZZLE_DUPLICATION_MODE
8 years ago
91777dd76c
Add DUAL_NOZZLE_DUPLICATION_MODE option
8 years ago
260bbb3109
Fix a couple of simple typos
8 years ago
179e091473
Merge pull request #4374 from thinkyhead/rc_jbrazio_timestamp_t
...
Implements timestamp_t structure
8 years ago
499e404fbf
forwardKinematics for Delta printers
8 years ago
23043a1e05
Rework some code to use timestamp_t struct (saves 72 bytes)
8 years ago
9388dcfa49
Implements timestamp_t structure
8 years ago
0b2c608d2f
Merge pull request #4372 from jbrazio/gcc-bark
...
Fix minor gcc warning
8 years ago
311c7dadb6
Cleanup do_blocking_move_to for DELTA
8 years ago
b78590e63d
Patch and cleanup run_z_probe
8 years ago
2f7716987d
Fix minor gcc warning
8 years ago
efd3aabda8
Adds missing documentation to the point_t structure
8 years ago
39caef4279
Merge pull request #4361 from AnHardt/imp-dbmt-for-delta
...
DELTA do_blocking_move_to() more like the Chartesian one
8 years ago
7d869ad98b
Merge pull request #4365 from thinkyhead/rc_shrink_planner_accel
...
Adjustments to planner acceleration limit
8 years ago
376a57232e
DELTA do_blocking_move_to() more like the Chartesian one
8 years ago
824c6859e2
Merge pull request #4369 from thinkyhead/rc_no_static_moves
...
inline to fix warnings, smaller build size (sometimes)
8 years ago
976c31235d
inline to fix warnings, smaller build size (sometimes)
8 years ago
6ef26a85d8
Back to the differences method in run_z_probe()
8 years ago
4226f56f53
Revert the planner acceleration logic somewhat
8 years ago
16e5348659
Merge pull request #4360 from thinkyhead/rc_toolchange_for_G28
...
Always switch to tool 0 for G28
8 years ago
209f5c03d0
Fewer temporary vars in planner accel limit
8 years ago
62ecd107ba
Patch ultralcd_impl header conditional names
8 years ago
d2e9a9c188
Always switch to tool 0 for G28
8 years ago
194d9521c3
Merge pull request #4356 from thinkyhead/rc_simpler_run_z_probe
...
Unify run_z_probe
8 years ago
4a6ed5e221
Use HOMING_FEEDRATE_Z for Z_PROBE_SPEED_FAST
8 years ago
09a3cc33e6
Unify run_z_probe
...
Unify run_z_probe
Add double touch for DELTAs.
Introduce Z_PROBE_SPEED_FAST and Z_PROBE_SPEED_SLOW
defaulting to homing_feedrate_mm_m[Z_AXIS] and homing_feedrate_mm_m[Z_AXIS]/2
8 years ago
6137a1d934
Merge pull request #4359 from thinkyhead/rc_wrangle_movement_etc
...
Use ENABLED(MAPPER_NON)
8 years ago
0432613ad7
use enabled macro for mapper setting
8 years ago
e44b37cdc2
motion section marker below homing speeds
8 years ago
204fd6ec44
Set homing feedrates individually
8 years ago
2bad02e60d
Reprapworld Keypad: F1 opens the Move Axis menu
8 years ago
eaa6f568ee
Prevent re-entrant call of Reprapworld Keypad handler
8 years ago
6abf916575
Reprapworld Keypad move step is 1mm
8 years ago
06ac1f3bcf
Reduce Reprapworld Keypad move code size
8 years ago
5d5affdfca
Merge pull request #4355 from thinkyhead/rc_rename_ultralcd_files
...
Rename ultralcd implementation files for consistency
8 years ago
bb225dedc6
Merge pull request #4354 from thinkyhead/rc_jbrazio_rework_g12
...
NOZZLE_CLEAN_FEATURE with no dependency on HAS_BED_PROBE
8 years ago
8a2efd1155
Rename ultralcd implementation files for consistency
8 years ago
b869fbc05e
Update all config files with the new G12 options
8 years ago
47fef80848
Nozzle::clean() no longer requires HAS_BED_PROBE
8 years ago
f1f1bac0e1
Merge pull request #4341 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
8 years ago
6c899bb520
Merge pull request #4349 from jbrazio/gcc-bark-bark
...
Removes some minor GCC warnings
8 years ago
ef0a22871e
Merge pull request #4350 from jbrazio/followup-a875861
...
Adds utility.h
8 years ago
9eba58a031
Merge pull request #4351 from jbrazio/u8glib-converter
...
Updates u8glib's bmp2hex converter
8 years ago
c502018eab
Merge pull request #4353 from jbrazio/global-enum-file
...
General cleanup: enum
8 years ago
0f9953b031
Merge pull request #4342 from AnHardt/rep-cons-g28
...
Introduce line_to_axis_pos() for use in homeaxis()
8 years ago
11c075c6b2
Introduce line_to_axis_pos(axis_codes axis, float where, float feed_rate = 0.0)
...
and use it in `homeaxis()` instead of `do_blocking_move_to_axis_pos()`.
`do_blocking_move_to_axis_pos` was wrong because it performed subdivided, delta-corrected moves for x- and y-axis.
The first common move for delta homing is like quick_home but for 3 towers.
Fix two warnings.
8 years ago
3ebad4e020
Moves all global enums to a central file
8 years ago
238fefcb00
Updates Stopwatch class to use internal state enum
8 years ago
30ac0782a9
Comment section style correction
8 years ago
8ecee431c4
Updates u8glib's bmp2hex converter
8 years ago
79e7721b76
Removes some minor GCC warnings
8 years ago
f4d63796b2
Adds utility.h
8 years ago
361307831e
Follow-up the PR #4335 (Debug char, fix compile errors for lcd pins)
...
・Solve a flickering when SD card is inserted or removed at using a ASCII
LCD + language_kana.h
8 years ago
ff48bbb86a
Update Japanese translation
...
・Add new translation
8 years ago
46117593b9
Merge pull request #4185 from esenapaj/Update-Japanese-translation
...
Update Japanese translation (work in progress)
8 years ago
3422103863
Merge pull request #4310 from thinkyhead/rc_mbl_position_shift
...
Fix position shift with MBL
8 years ago
92757bd7b3
Merge pull request #4339 from esenapaj/Follow-up-the-PR-#4163
...
Follow-up the PR #4163 (Mixing and Switching Extruders)
8 years ago
493d30cd97
Drop intermediate nx, ny, and set destination directly
8 years ago
07a735ad22
We always use `destination` so modify mesh_buffer_line
8 years ago
04a5b7b257
A macro to normalize positions
8 years ago
5c8e87a866
Follow-up the PR #4163 (Mixing and Switching Extruders)
...
・Update forgotten K8400 files
8 years ago
86eb5251c5
Fix some debug messages
8 years ago
1e57a6af73
Use blocking_move, current_position in G28 homing
8 years ago
f6a3a1da09
nz and ne are always set, so drop them down
8 years ago
d0009e013b
Rename cell index vars
8 years ago
697373b071
Reduce code size of mesh_buffer_line
8 years ago
103d312f6d
MBL can actually do up to 9 x 9
8 years ago
f4a69281fc
Only call mesh_buffer_line when MBL is active
8 years ago
799a31cd30
Include the position_shift when splitting mesh lines
8 years ago
f242aea032
Merge pull request #4319 from thinkyhead/rc_feedrates_to_mess_with_you
...
Wrangle feed rate variables
8 years ago
0342661b3f
Merge pull request #4335 from thinkyhead/rc_status_pad_jp
...
Debug char, fix compile errors for lcd pins
8 years ago
81e01152bb
Merge pull request #4336 from thinkyhead/rc_bltouch_sensor
...
BLTouch probe sensor
8 years ago
1583177ef4
BLTOUCH probe config option
8 years ago
176b9627c7
Some cleanup ahead of BLTOUCH support
8 years ago
39706f3e57
Endstop invert flags as macros instead of const bool
8 years ago
7242d44810
Endstops vars already initialized
8 years ago
5ed1e7a464
codenum => dwell_ms
8 years ago
69d6016941
Revert default state of endstops in M502
8 years ago
0fcd3706dd
Replace ENDSTOPS_ONLY_FOR_HOMING with ENDSTOPS_ALWAYS_ON_DEFAULT
8 years ago
671634bf11
Fix spacing after section header
8 years ago
f38553b482
fix a debug message
8 years ago
3d78b8f929
Use HYPOT macro instead of hypot function
8 years ago
9f9fe043ba
Apply sq macro throughout
8 years ago
93ba5bddd7
Append units to feedrate variables
8 years ago
5e3d3918b6
Patch compile error for RAMPS LCD pins
8 years ago
94955a8bf7
pad string in lcd_finishstatus
8 years ago
21ee0612e3
Debug char
8 years ago
8f24e0a556
Debugging of MBL in G28
8 years ago
05da02f0a2
Implement MIXING_EXTRUDER and SWITCHING_EXTRUDER
8 years ago
22b4cff423
New extruder type configuration options
8 years ago
601015b73e
Update Japanese translation
8 years ago
9766e24504
Merge pull request #4277 from thinkyhead/rc_mks_13_viki2
...
Support for VIKI2 with MKS 1.3 / 1.4
8 years ago
02285662f5
Merge pull request #4298 from jbrazio/feature/filament-counter
...
Adds filamentUsed and longestPrint stats to PrintCounter
8 years ago
bf16ae5a70
Merge pull request #4299 from jbrazio/feature/g27-park-nozzle
...
Implements park nozzle feature
8 years ago
aaa0d298b9
Merge pull request #4326 from thinkyhead/rc_no_static_items_fix
...
Suppress compiler warnings in ultralcd.cpp
8 years ago
cc3ef73583
Merge pull request #4327 from thinkyhead/rc_petrzjr_long_print
...
LCD Longer print
8 years ago
77c8fb627f
Merge pull request #4329 from thinkyhead/rc_italian_fix
...
Added missing Italian translations
8 years ago
b14888501b
Merge pull request #4301 from Ingramz/RCBugFix
...
Add Cartesio CN Controls V11
8 years ago
32e0d71729
Added missing translations
8 years ago
0f3232065e
Merge pull request #4305 from jbrazio/feature/splash-improvement
...
Custom boot screen feature improvement
8 years ago
2d7fe9dc78
LCD Longer print
8 years ago
eee903bd4b
Format some DAC lines
8 years ago
d53dcaa796
Suppress some compiler warnings
8 years ago
fa4274cf4c
Improves the custom bootscreen logo feature
8 years ago
1f3283e3a5
Adds custom boot logos for bq Hephestos 2 and Cartesio
8 years ago
dfa1c45075
Adds a notice to vendors about the SHOW_CUSTOM_BOOTSCREEN directive
8 years ago
ed468e848f
Merge pull request #4321 from esenapaj/Follow-up-the-PR-#4287
...
Follow-up and fix the PR #4287 (Allow stopwatch and printcounter to go over 18:12:15)
8 years ago
a8758619ec
The safe_delay() is now globaly accessible
8 years ago
9a00108cb6
Adds the WEBSITE_URL as the boot screen line 2
8 years ago
f5234b0695
Adds a customizable screen timeout for the default boot screen
8 years ago
2f26bc2153
Adds filamentUsed and longestPrint stats to PrintCounter
8 years ago
336481ea81
Added G27 configuration options to all configs
8 years ago
c711701626
Implements a nozzle parking command (G27)
8 years ago
5f368d1bc3
Followup for #4320
8 years ago
d7c51bc4b9
Merge pull request #4320 from jbrazio/followup/4307
...
Moves do_blocking_move_to_xy() out of the HAS_BED_PROBE define
8 years ago
af9b1d79b1
Follow-up and fix the PR #4287 (Allow stopwatch and printcounter to go over 18:12:15)
...
・Remove MSG_END_HOUR and MSG_END_MINUTE from all the language files
・Change from MSG_INFO_TOTAL_PRINTS to MSG_INFO_PRINT_COUNT in German
file
8 years ago
e563634a25
Merge pull request #4314 from AnHardt/use-d_b_m_t-in-g28
...
Use do_blicking_move_to*() in G28
8 years ago
59ae1811c2
Merge pull request #4303 from AnHardt/delta-g28
...
DELTA: Move out of the clip-zone after G28
8 years ago
fdea8b6e6a
Moves do_blocking_move_to_xy() out of the HAS_BED_PROBE define
8 years ago
d2a49c016d
DELTA: Move out of the clip-zone after G28
...
Move down to a safe height after G28 for DELTAs.
8 years ago
46994fd17d
Use do_blicking_move_to*() in G28
8 years ago
ffbb31b235
Fixes an PSTR overflow with print_xyz()
8 years ago
ecb23c1b65
Add Cartesio CN Controls V11 board
8 years ago
c8f2dd7cd5
Fix CN Controls 12 styling
8 years ago
cec7110409
Merge pull request #4308 from thinkyhead/rc_debug_gcode_t
...
Added logging related to gcode_T
8 years ago
6446d3939a
Merge pull request #4309 from thinkyhead/rc_static_item_fix_77
...
Fix skipping of static items
8 years ago
95ab2fd3ae
Fix skipping of static items
8 years ago
166f19251e
Add more debugging for leveling
...
- Especially in `gcode_T`
- In `update_software_endstops`
- Some tweaks to observe
8 years ago
7ac0b91a45
Collapsible long comment in gcode_T
8 years ago
e71a631f8f
do_blocking_move_*() no longer depend on HAS_BED_PROBE
8 years ago
8bf6861af8
Merge pull request #4054 from jbrazio/feature/g12-clean-tool
...
Implements clean nozzle feature (Lulzbot's REWIPE)
8 years ago
c5e51f6b96
finished => completed
8 years ago
1618870c84
card.printingHasFinished does print_job_timer.stop
8 years ago
34da77dad3
Simply run M31 at the end of an SD print
8 years ago
23d2bc5ab0
Patch Greek for new strings
8 years ago
a8d71f0ac6
Support longer print times in M31
8 years ago
e481b79af1
Allow stopwatch and printcounter to go over 18 hours
8 years ago
68c343a09a
Added G12 configuration options to all configs
8 years ago
4937f9ada4
Minor G12 tweaks and point_t struct extension
8 years ago
6080924589
Merge pull request #4296 from jbrazio/feature/bqh2-update
...
Update the bq Hephestos 2 configuration
8 years ago
ed89c71e53
Merge pull request #4291 from esenapaj/Follow-up-the-PR-#4278
...
Follow-up the PR #4278 (Fixups for PID_ADD_EXTRUSION_RATE and HOTENDS==1)
8 years ago
021544f572
Improves G12 zig-zag pattern
8 years ago
b05a75655a
Implements a nozzle cleaning pattern generator (G12)
8 years ago
005af84140
Update the bq Hephestos 2 configuration
8 years ago
8f03f0be9b
Follow-up the PR #4252 (Replace PLA/ABS preheating with generic)
8 years ago
c2c8ab4698
Follow-up the PR #4278 (Fixups for PID_ADD_EXTRUSION_RATE and HOTENDS==1)
8 years ago
4f77adddbe
Merge pull request #4286 from thinkyhead/rc_debug_clean
...
Prefix and suffix in debug output
8 years ago
e5c7af5ddc
Merge pull request #4222 from thinkyhead/rc_allow_cold_extrude
...
M302: Add "P" parameter, status output
8 years ago
2224032568
Merge pull request #4285 from thinkyhead/rc_manual_move_fast_fine
...
No delay for the smallest LCD moves
8 years ago
cdd77d23bb
Neaten up temperature member data
8 years ago
d4c68279c8
Add "P" parameter to M302
8 years ago
a5bae3c7d5
Merge pull request #4229 from blubbfish/patch-1
...
Update language_de.h for German translation
8 years ago
a8b6b6a128
Merge pull request #4252 from thinkyhead/rc_rename_hpb
...
Replace PLA/ABS preheating with generic
8 years ago
1e14df876d
Use varname as prefix in DEBUG_POS, string as suffix
8 years ago
9e8b3e5ee6
Homing direction is irrelevant in probe raise!
8 years ago
ecd5e810ac
No delay for the smallest LCD moves
8 years ago
2b9515d60f
Merge pull request #4281 from AnHardt/lang-system
...
Don't use UTF-strlen() if the text is not UTF
8 years ago
973a669aa3
Merge pull request #4264 from thinkyhead/rc_ultralcd_encoder_pos
...
Remove extraneous conditions for encoder position
8 years ago
e9f62d8fdb
Remove extraneous conditions for encoder position
8 years ago
7c81398f95
Merge pull request #4279 from esenapaj/Follow-up-the-PR-#4271
...
Follow-up the PR #4271 (X_DUAL_STEPPER_DRIVERS)
8 years ago
0554b65d22
Merge pull request #4284 from thinkyhead/rc_serial_ln_macros
...
Sled-probe sanity fix, conditionals for remaining types of leveling
8 years ago
655c3fd55f
Move delta ABL sanity checks up
8 years ago
db0882d068
AUTO_BED_LEVELING_3POINT and DELTA_BED_LEVELING_GRID
8 years ago
e974ac63ef
Init matrix in planner.init
8 years ago
47d55513ec
Merge pull request #4280 from AnHardt/msg-file-upload
...
Finalalize MSG_SD_WRITE_TO_FILE message with a \n
8 years ago
b273736962
Make MAPPER_NON the fall back mapper
...
Make MAPPER_NON the fall back mapper - if no other is defined.
One list less to maintain.
8 years ago
54d35230df
Don't use UTF-strlen() if the text is not UTF
8 years ago
a1de96d152
Merge pull request #4278 from thinkyhead/rc_more_hotends_1
...
Fixups for PID_ADD_EXTRUSION_RATE and HOTENDS==1
8 years ago
87957c7b44
Finalalize MSG_SD_WRITE_TO_FILE message with a \n
...
Finalalize MSG_SD_WRITE_TO_FILE message with a \n
else RH hangs.
8 years ago
9b5cbf2423
Follow-up the PR #4271 (X_DUAL_STEPPER_DRIVERS)
...
・Update a forgotten Configuration_adv.h of K8400
8 years ago
809da999dc
Apply HOTEND_INDEX in preheat methods
8 years ago
3d78b690e5
Single PID dataset with HOTENDS == 1
8 years ago
bf9967c65d
Apply HOTEND_INDEX in MILLISECONDS_PREHEAT_TIME
8 years ago
11dcbae7a2
Only a single E axis. Can tool-change reseed position[E_AXIS]?
8 years ago
4865447830
Merge pull request #4276 from esenapaj/Suppress-warnings
...
Suppress warnings
8 years ago
815df28b0b
Merge pull request #4274 from esenapaj/Follow-up-the-PR-#4024
...
Follow-up the PR #4024 (Greek Language by @psavva)
8 years ago
44f739a5eb
Merge pull request #4273 from esenapaj/Fix-for-the-PR-#4256
...
Fix for the PR #4256 (Additional tweaks for HOTENDS == 1)
8 years ago
02f711fe00
Merge pull request #4275 from AnHardt/dont-deploy
...
Don't deploy/stow the probe if z-min-endstop is used for homing
8 years ago
6a45aad893
Merge pull request #4272 from AnHardt/m100-rep
...
Repair M100
8 years ago
243ad4312a
Merge pull request #4271 from thinkyhead/rc_X_DUAL_STEPPER_DRIVERS
...
X_DUAL_STEPPER_DRIVERS
8 years ago
6e68dd292b
Merge pull request #4243 from thinkyhead/rc_fix_static_scrolling
...
Improve STATIC_ITEM implementation
8 years ago
d17b161832
Don't draw current screen if simply changing screens
8 years ago
096f9981d1
Scroll to the top when changing screens
8 years ago
7ae84d768e
Tweak conditionals for REPRAPWORLD_KEYPAD
8 years ago
155af6b861
Rename vars, add comments for menu macros
8 years ago
31f2cf5f6f
Make encoderLine signed for proper compares
8 years ago
d9f75f62c0
START_ROW => START_COL
8 years ago
d2099fef0d
Left-justify thermistor info
8 years ago
85aeb02aa6
Invert headings on Graphical LCD
8 years ago
3a67fb77b0
Concatenate LCD static strings
8 years ago
13dc619f43
Scroll static screens more simply
8 years ago
5051723c2e
Redraw after cursor correction in STATIC_ITEM
8 years ago
58177a1602
Suppress warnings
8 years ago
10ebf28ee3
Allow override of ENCODER_FEEDRATE_DEADZONE, lower default for Viki
8 years ago
9b1ba1012a
Support for VIKI2 with MKS Gen 1.3 / 1.4
8 years ago
55dc8051d8
Cleanup of RAMPS LCD pins
8 years ago
7bcab26f2a
Don't deploy/stow the probe if z-min-endstop is used for homing
...
Don't deploy/stow the probe if z-min-endstop is used for homing.
Don't apply `zprobe_zoffset` if probe was not used.
8 years ago
84ded1f659
Follow-up the PR #4024 (Greek Language by @psavva)
...
・Update forgotten Configuration.h of K8400
8 years ago
6af525e252
Fix for the PR #4256 (Additional tweaks for HOTENDS == 1)
8 years ago
23e0134596
Repair M100
...
M100 D was running too long - caused watchdog resets.
M100 I showed more free memory than a Arduino Mega has RAM.
8 years ago
4b4a582c4f
X_DUAL_STEPPER_DRIVERS implementation
8 years ago
91bd6eade7
X_DUAL_STEPPER_DRIVERS configuration option
8 years ago
6121c9018a
Merge pull request #4265 from thinkyhead/rc_buzzer_patchup
...
Two strategies to address a stuck buzzer
8 years ago
4a100c6832
Merge pull request #4250 from AnHardt/wait-for-cooling-slope
...
Adjust wait_for_cooling slope
8 years ago
ed018c98d5
Merge pull request #4024 from thinkyhead/rc_greek_language
...
Greek Language by @psavva
8 years ago
d1dffc7ad1
timestamp => endtime
8 years ago
71674059c3
Two strategies to address a stuck buzzer
8 years ago
928ff6487a
Greek language pack from @psavva
8 years ago
e92e58df1f
Adjust wait_for_cooling slope
...
Adjust wait_for_cooling slope
and drop mintemp for cooling.
See
https://github.com/MarlinFirmware/Marlin/pull/4169#issuecomment-231544532
8 years ago
167f4aa0cc
Merge pull request #4259 from clexpert/patch-3
...
Update language_cz.h
8 years ago
8dda05e92a
Merge pull request #4258 from clexpert/patch-2
...
Total print time for LCD correction (hours:minutes format)
8 years ago
182c8d7f8f
Dyze High Temp Thermistor Support
8 years ago
5b0e46c986
Merge pull request #4256 from thinkyhead/rc_fix_singlenozzle_temp
...
Additional tweaks for HOTENDS == 1
8 years ago
ee0983ab57
Further reduction when HOTENDS == 1
8 years ago
3e1bbd5e27
Indentation in gcode_M100
8 years ago
b72238f406
Invariant get_pid_output with HOTENDS < 2
8 years ago
66602f4af6
Update language_cz.h
...
New strings:
#define MSG_HALTED
#define MSG_PLEASE_RESET
Some texts shortened for smaller displays.
8 years ago
eaf9e615ce
Total print time for LCD correction (hours:minutes format)
8 years ago
9e56d5825e
Adjust spacing
8 years ago
5832f4b848
Follow-up the PR #4253 (Runout Sensor without SD Card, Print Timer support in M104)
...
・Update forgotten example configuration files
8 years ago
77283f5bf0
Merge pull request #4245 from thinkyhead/rc_simpler_therm_check
...
Simpler/extensible thermistor test in thermistortables.h
8 years ago
f9e08b1fcd
Merge pull request #4254 from AnHardt/killscreen
...
Add a kill-screen
8 years ago
faac2bcfdb
Add a kill-screen
8 years ago
3b3e52616c
Merge pull request #4253 from thinkyhead/rc_clexpert_runout
...
Runout Sensor without SD Card, Print Timer support in M104
8 years ago
aa3ab93971
Merge pull request #4240 from AnHardt/sampler-8-7-16
...
Today's fix and cleanup collection
8 years ago
4cd045791c
Reduce code size by trusting the compiler
8 years ago
a8538bd7ce
General cleanup, code reduction in Marlin_main.cpp
8 years ago
1026e5b071
Replace PLA/ABS preheating with generic
8 years ago
e282d69f63
Print job timer comment changed
8 years ago
a2159cfbc3
Error message change in SanityCheck.h
8 years ago
315b4c2153
Runout sensor without SD Card
8 years ago
51c9c3fe2c
Indentation in MarlinSerial.cpp
8 years ago
e03414b2dd
Simpler/extensible thermistor test in thermistortables.h
8 years ago
4b44a23a36
Add TX-buffer for MarlinSerial
...
Similar to the current Arduino HardwareSerial
but with max. 256 byte buffer-size.
Deactivated by default.
The boards with AT90USB processor (USBCON) already use a TX-buffer.
8 years ago
468f7f03a2
homeaxis() can leave early
...
when no known axis needs to be homed.
Most changes are only caused from altering the indentation.
```
if (axis == X_AXIS ? HOMEAXIS_DO(X) : axis == Y_AXIS ? HOMEAXIS_DO(Y) : axis == Z_AXIS ? HOMEAXIS_DO(Z) : 0) {
...
}
to
if (!(axis == X_AXIS ? HOMEAXIS_DO(X) : axis == Y_AXIS ? HOMEAXIS_DO(Y) : axis == Z_AXIS ? HOMEAXIS_DO(Z) : 0)) return;
...
```
8 years ago
eff7912243
Ensble/disable hardware endstops in G28 globally.
...
For moving away from the endstops we do not have to disable them.
They are not tested anyway.
8 years ago
f69434d81c
Eliminate `void setup_for_endstop_move()`
8 years ago
0ea6247fc2
Use logic in Z_SAFE_HOMING
...
Use logic in Z_SAFE_HOMING
From
```
if (home_all_axis || homeZ) {
if (home_all_axis) {
...
home z
}
else if (homeZ) { // Don't need to Home Z twice
home z
}
}
```
to
```
if (home_all_axis || homeZ) {
if (home_all_axis) {
...
}
home z
}
```
8 years ago
de3a169336
Always define MIN_Z_HEIGHT_FOR_HOMING even if 0
...
Always define MIN_Z_HEIGHT_FOR_HOMING even if 0
Always make a potential rise to `home_offset[Z_AXIS]` possible in G28.
Get rid of some very ugly constructs in MBL (ultralcd.cpp).
8 years ago
88ed232f53
Remove HAS_BED_PROBE case in first raise in G28
...
Differentiating made sense here when we could save a dozen lines of code,
but not for one line.
8 years ago
653eff3b31
Clean up `quick_home_xy()`
...
Since we do the actual homing now in the 'normal' routines `quick_home_xy()`
can be simplified to a relative simple diagonal move.
8 years ago
98d0167a57
Merge pull request #4226 from thinkyhead/rc_emergency_command_parser
...
MarlinSerial emergency-command parser (with M108)
8 years ago
2ee4e4f791
Make wait_for_heatup volatile
8 years ago
bd5a825b8b
Wait for end of line before invoking action
8 years ago
ea47803ae2
Simplify emergency parser (only parse initial command)
8 years ago
834ad14c8d
Add quickstop_stepper to update current position with stepper.quick_stop()
8 years ago
ecffe92e20
Group EMERGENCY_PARSER commands
8 years ago
a129078927
Add an emergency-command parser to MarlinSerial (supporting M108)
...
Add an emergency-command parser to MarlinSerial's RX interrupt.
The parser tries to find and execute M108,M112,M410 before the commands disappear in the RX-buffer.
To avoid false positives for M117, comments and commands followed by filenames (M23, M28, M30, M32, M33) are filtered.
This enables Marlin to receive and react on the Emergency command at all times - regardless of whether the buffers are full or not. It remains to convince hosts to send the commands. To inform the hosts about the new feature a new entry in the M115-report was made. "`EMERGENCY_CODES:M112,M108,M410;`".
The parser is fast. It only ever needs two switch decisions and one assignment of the new state for every character.
One problem remains. If the host has sent an incomplete line before sending an emergency command the emergency command could be omitted when the parser is in `state_IGNORE`.
In that case the host should send "\ncommand\n"
Also introduces M108 to break the waiting for the heaters in M109, M190 and M303.
Rename `cancel_heatup` to `wait_for_heatup` to better see the purpose.
8 years ago
9f42b1a075
Merge pull request #4235 from thinkyhead/rc_revert_quickhome_test
...
Fix quick homing, tweak MIN_Z_HEIGHT_FOR_HOMING
8 years ago
ad968f2325
Merge pull request #4234 from thinkyhead/rc_better_position_logging
...
Move XYZ in print_xyz and DEBUG_POS to the front
8 years ago
4036c73cdd
Don't raise Z if only homing Z
8 years ago
0b6f8f8244
Apply MIN_Z_HEIGHT_FOR_HOMING raise literally
8 years ago
177ec20bf0
Revert quick-home changes
8 years ago
9c5b462ef2
Move XYZ in print_xyz and DEBUG_POS to the front
8 years ago
4e84c803a3
Merge pull request #4232 from thinkyhead/rc_no_axis_codes_needed
...
Don't use axis_codes if a literal will do
8 years ago
e2f7cb0905
Don't use axis_codes if a literal will do
8 years ago
6559f7359f
Fix comment on Z raise for homing, save a few bytes
8 years ago
799c60cadc
Merge pull request #4217 from thinkyhead/rc_fix_homing_raise
...
Don't do_probe_raise with MIN_Z_HEIGHT_FOR_HOMING
8 years ago
d7e9647505
Sanity Check for probe raises
8 years ago
d0b29cabf3
Don't re-home X and Y if you quick homed
8 years ago
e0a6b978f5
Don't do_probe_raise with MIN_Z_HEIGHT_FOR_HOMING
8 years ago
cf8ec1216a
Update language_de.h for German translation
...
@MarlinFirmware/language-team my changes for the German language. Feel free to improve :)
8 years ago
b81b77111b
Update language_cz.h
8 years ago
7735ec5e7a
Merge pull request #4223 from thinkyhead/rc_rename_heatup
...
Change cancel_heatup to wait_for_heatup
8 years ago
160a2be117
Change cancel_heatup to wait_for_heatup
8 years ago
16c83d203b
Make use of the good features of a sled probe for all probes.
...
Move and extend axis_unhomed test to deploy/stow_z_probe().
Move and extend position store/restore to deploy/stow_z_probe().
Now all kinds of probes can use the 'E' parameter in G29/M48.
Allen key probes can be used now for grid and 3-point levelling.
Deploying the Allen Key probe uses big moves in z direction.
Too dangerous for an unhomed z-axis.
Throw a compile time error when we try to configure an
Allen Key probe homing to z-min and having no other z-min-endstop.
8 years ago
8555816a11
Generalize and simplify 'triggered when stowed test`
...
The `PROBE_IS_TRIGGERED_WHEN_STOWED_TEST` is able to detect if a probe is
successfully deployed/stowed.
It was part of the Allen Key probes code only.
Now the function is generally available.
Currently this test is compulsory for Allen Key probes to not alter the used behaviour
If you want to add the test for an other type of probe simply add
```
#define PROBE_IS_TRIGGERED_WHEN_STOWED_TEST
```
to your config.
8 years ago
5126cce7fd
Move Allen Key probe move scripts to their own functions
...
There was an hidden extra move after the scripts. This is configurable now.
Added the extra moves to the relevant configs.
8 years ago
7d063c111c
Add a optional feedrate parameter to `do_blocking_move()`
...
Add a optional feedrate parameter to `do_blocking_move()` and its companions.
8 years ago
b114b6a0b3
Save 152 bytes using uint8_t for command indices
8 years ago
0d4ff0c48b
Allow the queue to be cleared from within commands
8 years ago
c450851401
Merge pull request #4209 from AnHardt/too-high-G28
...
Make raise for probe deploy relative in homeaxis()
8 years ago
f799f18388
MBL typo
8 years ago
8b02e68cb6
Make raise for probe deploy relative in homeaxis()
...
Make raise for probe deploy relative in homeaxis()
by setting `current_position[axis]` to zero later.
8 years ago
e48502866b
Merge pull request #3611 from alephobjects/M108_cancel_heatup
...
Introduce M108 cancel wait for heatup/cooldown of the hotend and bed
8 years ago
d70197f514
Merge pull request #4204 from thinkyhead/rc_fix_gcode_t_position
...
Additional patches for gcode_T position change
8 years ago
869b517589
Merge pull request #4205 from thinkyhead/rc_fixup_unit_references
...
References to millimeters in code comments need an update
8 years ago
e104b91ea6
References to millimeters in code comments need an update
8 years ago
ff91d28a3a
Remove wants_to_cool warning
...
Remove wants_to_cool warning
8 years ago
c9e536cf87
Additional patches for gcode_T position change
8 years ago
60865fc45b
Merge pull request #4202 from thinkyhead/rc_fix_gcode_t_position
...
Fix position adjustment with gcode_T and MBL
8 years ago
f841038313
Merge pull request #4201 from thinkyhead/rc_info_fit
...
Shorter labels for Print Stats info
8 years ago
f31af61ee2
Fix position adjustment with gcode_T and MBL
8 years ago
a8f5c2bf96
Merge pull request #4192 from birkett/k8400
...
Add Velleman K8400 board support.
8 years ago
ef8980bfa0
Shorter labels for Print Stats info
8 years ago
2ed625dafa
Fix compiler warnings for static screens
8 years ago
e77844594d
readme.md -> README.md
8 years ago
a0b00d29e3
Add a ported example configuration for the Velleman K8400 (Vertex) printer.
...
Supports both dual and single head printers (with the correct config).
Includes community sourced feed rate fix.
Rename / move files.
Remove redundant definitions.
8 years ago
9b42c6b44b
apply correction when swtiching from MBL to physical in G28 X
8 years ago
46196e9ee5
Add working PlatformIO support
8 years ago
95347fc650
Follow-up the PR #3662 (Rewritten FILAMENT_CHANGE_ENABLE feature)
...
・Update a forgotten Configuration_adv.h of Cartesio
8 years ago
a06c5165a7
Shorter strings for smaller LCDs
8 years ago
982f10e6a0
Use STATIC_ITEM for LCD message display
8 years ago
43ff0ce35f
Rewritten FILAMENT_CHANGE_ENABLE feature
8 years ago
51b7820686
Patch up About Printer sub-menus
8 years ago
439e78147d
Static menu items take an optional string, LJ by default
8 years ago
fa9b2a925d
Tweak spacing in printcounter.cpp
8 years ago
dbfc87cdcf
Squish sanity check for build info
8 years ago
7a377c1d75
Add "About Printer" information menu.
...
Includes:
*firmware version / branch / date.
*extruder count
*board information (name, serial details, power supply type)
*thermistors (names, min/max temperatures)
*printer statistics (PRINTCOUNTER details)
Thanks to @thinkyhead for contributions.
8 years ago
77a923d8ce
Merge pull request #4186 from thinkyhead/rc_array_macros
...
Simplified variable-size array macros
8 years ago
e650a75b88
Simplified variable-size array macros
8 years ago
ac4f235912
Merge pull request #4167 from thinkyhead/rc_eeprom_checksum
...
EEPROM Checksum
8 years ago
03b8f88092
Tab to Space
9 years ago
cb1b31f69b
Unconditional do_probe_raise() in probe_pt()
...
If Z_RAISE_BETWEEN_PROBINGS is null or undefined the probe is currently not raised by home_offset[Z_AXIS] and zprobe_zoffset.
But when different from 0 is.
If an undefined Z_RAISE_BETWEEN_PROBINGS expands to 0 (and it does) this is the solution.
A similar asymmetry exists with the newly introduced 'short-cut' in G28 - but its the rise before anything is probed - so should not make a difference.
9 years ago
7ef7843fd4
Merge pull request #4181 from thinkyhead/rc_rename_a_move_func
...
Do interpolated moves for Allen Key deploy/stow
9 years ago
6b2a7b30af
Extra comments to clarify EEPROM code
9 years ago
787f394676
MAX_EXTRUDERS replaces mysterious "4"
9 years ago
bc3748b7bc
Add shared Config_Postprocess for Read and Reset
9 years ago
adcd0f5de3
Some formatting in configuration_store.cpp
9 years ago
5e370006fc
EEPROM Checksum
9 years ago
725fde8b26
Merge pull request #4169 from thinkyhead/rc_wait_but_break
...
Allow wait-for-cooling, break at threshold or if cooling stalls
9 years ago
da6b0dab5f
Use prepare_move_to_destination for Allen Key deploy/stow
9 years ago
c42f8fb8dd
Rename some movement sub-functions
9 years ago
b6b3a4afbf
Merge pull request #4168 from thinkyhead/rc_viki2_for_ramps
...
Support for VIKI2 in RAMPS and derivatives
9 years ago
f84d85f761
Cleanup extruder runout configs
9 years ago
5e14a528dd
Always wait for cooling in M109/M190, break at low temp or if cooling stalls
9 years ago
0b0b7aac6e
Support for VIKI2 in RAMPS and derivatives
9 years ago
abda4ab427
Clean up CNControls pins
9 years ago
683975cf90
Fix spelling in a config comment
9 years ago
8268c0a9a0
Always define temp sensor, heater pins for RUMBA
9 years ago
db19959735
Merge pull request #4161 from thinkyhead/rc_general_cleanup
...
Reduce storage requirements for strings, make some PGM
9 years ago
2e96276bf4
More debug message cleanup
9 years ago
dc2c0e5e24
Simpler debug output for deploy/stow
9 years ago
bd491818d6
Reduce storage requirements for strings, make some PGM
9 years ago
ee876dcd7a
Merge pull request #4159 from thinkyhead/rc_rigidbot_diff
...
Rigidbot V2 support - has MCP4728 digipot
9 years ago
0c24e0e445
Support for newer Wire library
9 years ago
ddb386c139
Init DAC_DISABLE_PIN in dac_init
9 years ago
e480ee0054
Further cleanup of G28 for probes
9 years ago
39883d03fc
universalize axis_unhomed_error()
9 years ago
e616093d4c
Simplify dock_sled()
...
`dock_sled()` is never called with offset parameter - remove it.
We move x only - so only that needs to be homed. Consequence is - we can home to z-min now with a sled probe!
Feedrates are set and restored in `do_blocking_move()`.
We already checked if the probe is deployed/stowed in deploy/stow_probe.
```
if (z_loc < _Z_RAISE_PROBE_DEPLOY_STOW + 5) z_loc = _Z_RAISE_PROBE_DEPLOY_STOW;
```
makes no sense - remove.
Now the raise is the same for deploy/stow -> move before the if.
Replace the if with a ternary.
Instead writing LOW/HIGH use the boolean `stow` we already have.
There is no reason for not using the sled probe in G29/M48 with 'E'.
It takes a while but works. (tested!)
9 years ago
6c60869409
Support DAC_OR_ADDRESS in Printrboard too
9 years ago
593c8bf286
Support for Rigidbot V2
9 years ago
511503ede9
CARTESIO_UI has lcd contrast
9 years ago
829c92f1ba
Use Z_RAISE_BETWEEN_PROBINGS with MBL
9 years ago
eb1755208f
Merge pull request #4153 from thinkyhead/rc_probe_raise_options
...
Combine Z raise before/after options
9 years ago
10da7ac86c
Combine Z raise before/after options
9 years ago
9caa8941e2
Merge pull request #4149 from thinkyhead/rc_minimum_raise_in_probe_pt
...
Ensure a minimum height before XY move in probe_pt
9 years ago
3fa631130f
Ensure a minimum height before XY move in probe_pt
9 years ago
a7684eef7a
Squish code in ST7920
9 years ago
b4076883cc
Set testet delays for K8200, RAMBO, MINIRAMBO and ST7920
9 years ago
4454d80276
Decrease the needed nops to 1
...
by shitfing the left shift into the high phase.
```
2 cbi 0x2,1 ;set CLK //
1 in r18,__SREG__ //1
1-3 sbrc r24,7 //2-4
2 rjmp .L19 //4
1 cli .L19: //5
2 lds r25,258 lds r25,258 //7
1 andi r25,lo8(-2) ori r25,lo8(1) //8
2 sts 258,r25 sts 258,r25 //10
1 out __SREG__,r18 out __SREG__,r18 //11
2 .L3: rjmp .L3 //13 //2
2 sbi 0x2,1 ;reset CLK // //13-15 //2-4
1 lsl r24 ; val //1
1 nop //2
2 cbi 0x2,1 ;set CLK //4
...
```
9 years ago
56c42b572c
3 ms speedup for ST7920 and delay for BOARD_3DRAG
...
and saving ~1k memory
by limiting the `#pragma GCC optimize (3)` optimisation to `ultralcd_st7920_u8glib_rrd.h`. These optimisation was and is not done for all the other displays, is the reason for the big additionally use of memory, because the complete 'ultralcd.cpp' and 'dogm_lcd_implementation.h' was optimised (sadly i did not observe a change in speed).
Unrolling the loop in `ST7920_SWSPI_SND_8BIT()`, what i expected the optimiser to do, by hand, saved some speed by eliminating the loop variable (i) compares and increases. Every CPU cycle in this loop costs at least 0.5ms per display update because it's executed more than 1k times/s.
The delays are now pre-filled with the calculated values for 4.5V driven ST7920.
A way to simply add __your__ timing into the configuration was made.
At 4.5V
1.) The CLK signal needs to be at least 200ns high and 200ns low.
2.) The DAT pin needs to be set at least 40ns before CLK goes high and must stay at this value until 40ns after CLK went high.
A nop takes one processor cycle.
For 16MHz one nop lasts 62.5ns.
For 20MHz one not lasts 50ns.
To fulfill condition 1.) we need 200/62.5 = 3.2 => 4 cycles (200/50 = 4 => 4). For the low phase, setting the pin takes much longer. For the high phase we (theoretically) have to throw in 2 nops, because changing the CLK takes only 2 cycles.
Condition 2.) is always fulfilled because the processor needs two cycles (100 - 125ns) for switching the CLK pin.
Needs tests and feedback.
Especially i cant test 20MHz, 3DRAG and displays supplied wit less than 5V.
Are the delays right? Please experiment with longer or shorter delays. And give feedback.
Already tested are 5 displays with 4.9V - 5.1V at 16MHz where no delays are needed.
9 years ago
ca184d3d72
Merge pull request #4147 from thinkyhead/rc_fix_M48_raise
...
Fix debug output in probe_pt
9 years ago
b4161cbd98
Fix debug output in probe_pt
9 years ago
da88b00585
MBL: Add support for max z endstop
...
See https://github.com/MarlinFirmware/Marlin/issues/4088
9 years ago
74878d1f16
Always do a brief delay in `lcd_quick_feedback`
9 years ago
7de7552069
Merge pull request #4133 from MagoKimbra/Single_home_axis_delta
...
Single home Axis Delta need simple sync_plan_position
9 years ago
15a6b49f37
Simplified probe_pt (in G30)
9 years ago
6a7045b9bf
Remove clean_up_after_endstop_move
9 years ago
2a4f866561
Simplified probe_pt (in G29)
9 years ago
89a2aa026b
Simplified probe_pt (in M48)
9 years ago
f8530c5d1f
Simplified probe_pt function (G28 grid)
9 years ago
c376c08042
Simplified probe_pt function (part 1)
9 years ago
9a71b7f8ad
Fix debug message for 3-point leveling
9 years ago
550c03a5a9
Drop raise_z_after_probing function
9 years ago
bb38c816af
Always raise in deploy_z_probe / stow_z_probe
9 years ago
68f3350050
Cleanup M401 / M402
9 years ago
3afda99adf
Regular handlers for G31 / G32
9 years ago
6803c8e37e
Move Z up before, or down after XY, for "blocking move"
9 years ago
03c70c1990
SERVO_DEACTIVATION_DELAY => SERVO_DELAY
9 years ago
570f3bbc07
Single home Axis Delta need simple sync_plan_position
9 years ago
61f34eec03
Merge pull request #4125 from jbrazio/bugfix/planner-warning
...
Fixes some compiler warnings
9 years ago
bdcd628896
Merge pull request #4126 from thinkyhead/rc_lin_timing_patch
...
Patch LIN_ADVANCE timing issue
9 years ago
664232140d
Fixes somes compiler warnings
9 years ago
0c5192b288
Patch LIN_ADVANCE timing issue
...
Also the extruder stepper ISR has to keep an eye on step_loops count.
9 years ago
d4134e6901
Define Z_SAFE_HOMING point when Z_PROBE_SLED is activated alone
9 years ago
7b2fadd598
Apply some fixes from Andreas
...
Derived from
https://github.com/AnHardt/Marlin/commit/6e8ede8c694fa4d9e3c769840b09d56
7f8d8e0dd
9 years ago
bd01592816
Goodbye MECHANICAL_PROBE
9 years ago
2640d13a9f
Simplify initial raise in M48
9 years ago
3763d45656
Return Z position in run_z_probe
9 years ago
1f48b5c30f
Pass a raise to probe_pt, not a Z position
9 years ago
6fdd5ba246
Save and restore feedrate in more places
9 years ago
fe173c2bc6
Generalized probe raise, use for after probing
9 years ago
7da3080761
Simpler cleanup in G28 / G29
9 years ago
15229d988b
Fix compile error for bed matrix in M48
9 years ago
c01352cbd5
Add a dependency for z servo macros
9 years ago
c3794bd695
Add HAS_PROBING_PROCEDURE conditional
9 years ago
42ce60c5cc
Make sure NUM_SERVOS is set for Z servo endstop
9 years ago
b590a7dee0
Make Z_RAISE_BETWEEN_PROBINGS a more general option
9 years ago
bb9c67b4b5
Tweak some feedrate vars
9 years ago
5158bd6e93
Screen out `G29 E` for sled and allen key, allow single probe
9 years ago
ccae92588d
Cleanup debug in G28 and G29
9 years ago
b4a9d2366c
Use a macro for kinematic sync_plan_position
9 years ago
bfccf26294
Use sync_plan_position_delta where needed
9 years ago
a6b8c67df4
Move probe deploy after setup call in G29
9 years ago
e69916d1bd
Split up endstop_move functions
9 years ago
0e18a4897b
Simpler handling of sled/allen-key in probe_pt
9 years ago
1a92e2ef18
Comment on run_z_probe
9 years ago
68e0e5855e
For all probes, at the end of G29 simply raise and stow
9 years ago
c3023f8cc5
Make M401/M402 available with HAS_BED_PROBE
9 years ago
9f0c255c69
Show uncorrected position in set_bed_level_equation_3pts
9 years ago
07298ac992
Initialize current_position to home_offset on boot
9 years ago
d50539583a
Make XY_PROBE_SPEED a general probe option
9 years ago
2798499b71
XY_TRAVEL_SPEED => XY_PROBE_SPEED
9 years ago
88dc543584
Add a macro for XY_TRAVEL_FEEDRATE
9 years ago
117db77c55
make motor_current_setting static and constexpr
9 years ago
19fb04d761
Update bq Hephestos 2 config
9 years ago
b0e47608e6
Merge pull request #4108 from esenapaj/Fix-for-PR-#4093
...
Fix for PR #4093 (Make Z Probe options independent of ABL), etc
9 years ago
c84732e605
Merge pull request #4111 from esenapaj/Cosmetic-changes-and-small-fix-for-thermistortables.h
...
Cosmetic changes and small fix for thermistortables.h
9 years ago
cdc661ea5e
Merge pull request #4110 from esenapaj/Small-cosmetic-changes-for-language-files
...
Small cosmetic changes for language files
9 years ago
c8186e9423
Merge pull request #4109 from esenapaj/Enclose-#error-string-by-double-quotes
...
Enclose #error string by double-quotes
9 years ago
40cd20a236
Fix comments on EXPERIMENTAL_I2CBUS
9 years ago
385945ca31
Cosmetic changes and small fix for thermistortables.h
...
・Adjust spacing
・Standardize comments position
・Remove ',' at the tail of array
9 years ago
fac58f0291
Cosmetic changes for language files
9 years ago
14b661b9e5
Enclose #error string by double-quotes
9 years ago
d583ea852d
Standardize format description of Panel
9 years ago
aa6d35bd49
Move code block of probe to appropriate position
9 years ago
740fb2ce39
Adjust spacing
9 years ago
f77f3ffa70
Remove duplicated Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX
9 years ago
19fe93a5a9
Clean up configs for Z_MIN_PROBE_REPEATABILITY_TEST
9 years ago
71a7408012
Merge pull request #4106 from thinkyhead/rc_temp_compile_err
...
Fix compile error with watch_bed_next_ms
9 years ago
dcb8ec32ee
Fix compile error with watch_bed_next_ms
9 years ago
3996242e9d
Allow Z_MIN_PROBE_REPEATABILITY_TEST solo
9 years ago
26a9cd0b08
Move run_z_probe to earlier block
9 years ago
7f8a2025af
Move raise_z_after_probing into earlier block
9 years ago
2530371516
Always disable probe at the end of G29
9 years ago
6aba98e470
Comment on setup_for_endstop_move
9 years ago
04e88d008e
Clear up ordering in G30
9 years ago
ed75b0ea11
Make clean_up function available for probes
9 years ago
51d52cb52a
Make run_z_probe available for any bed probe
9 years ago
f6b09cf465
Always use deploy/stow for dock_sled
9 years ago
3b457c2dd3
Use deploy/stow with FIX_MOUNTED_PROBE too
9 years ago
7e9d4a68d4
Always raise Z (if needed) for servo deploy/stow
9 years ago
9beb3f2f5e
Merge pull request #4097 from thinkyhead/rc_fil_runout_cleanup
...
FIL_RUNOUT_INVERTING false by default
9 years ago
f215b30932
Merge pull request #4093 from thinkyhead/rc_probe_without_abl
...
Make Z Probe options independent of ABL
9 years ago
2fd2301928
FILRUNOUT => FIL_RUNOUT
9 years ago
dfbf8b3c2c
FIL_RUNOUT_INVERTING false by default
9 years ago
7b5cd314a5
Merge pull request #4095 from thinkyhead/rc_fil_runout_cleanup
...
Improve FILAMENT_RUNOUT_SENSOR, FILRUNOUT_PIN
9 years ago
de12228758
Make Z Probe options independent of ABL
9 years ago
add0032820
Improve FILAMENT_RUNOUT_SENSOR, FILRUNOUT_PIN
9 years ago
f8c278ce4d
Cartesio UI display option in all configs
9 years ago
400e13d136
Output a message for SD read errors
9 years ago
96b8bcca84
Merge pull request #4081 from thinkyhead/rc_tweaky_m48_tweaks
...
Cleanup of M48
9 years ago
b7e3c1bbc4
Tweak M48 output conditions
9 years ago
1dad912b03
Adjust M48 raise / move handling
9 years ago
46d3ef2223
Simplify sample_set probe_pt call in M48
9 years ago
a647b05f82
Shrink some debug code in G28
9 years ago
4edf813bde
Just-in-time declaration style in M48
9 years ago
c475291e19
Fix M851
...
Minor change missing in the process of standardize the gcode M851
9 years ago
e35583888c
Merge pull request #4082 from esenapaj/Follow-up-the-PR-#4065
...
Follow-up the PR #4065 (Remove support for XY servo endstops)
9 years ago
6dff52d920
Merge pull request #4078 from RicardoGA/Language_Spanish
...
Update Spanish Language
9 years ago
d55b94d606
Follow-up the PR #4065 (Remove support for XY servo endstops)
...
・Update a forgotten Configuration.h of Cartesio
9 years ago
4e860babbc
Allow setting xy_travel_speed for delta leveling also
9 years ago
d36d4edd80
Tweak partial homing code
9 years ago
d3a05de96e
Save and restore feedrate in probe functions
9 years ago
5991eb428f
Update Spanish Language
...
Spanish language update and also add missing messages
9 years ago
f33bd0bb10
Merge pull request #4077 from thinkyhead/rc_delete_old_macros
...
Delete some obsolete Z servo macros
9 years ago
defcacc1a9
Delete some obsolete Z servo macros
9 years ago
bbf5b486c3
Add an SD Card stop function, use in ultralcd
9 years ago
3a150f07c2
Merge pull request #4073 from thinkyhead/rc_temp_mystery
...
Minor tweaks to M109 / M190
9 years ago
bd4ec727e7
Merge pull request #4066 from thinkyhead/rc_M851_with_probe
...
Make M851 standard with a bed probe
9 years ago
692a6e7c91
Merge pull request #4065 from thinkyhead/rc_goodbye_xy_servos
...
Remove support for XY servo endstops
9 years ago
de177ba6c9
Minor tweaks to M109 / M190
9 years ago
eab44b30d4
Safety and serial sections
9 years ago
fc56a547d1
Rename movement section to motion
9 years ago
a8b8796cd7
Define probe offsets when a probe exists
9 years ago
1000563d80
Make M851 standard with a bed probe
9 years ago
f66a194159
Merge pull request #4062 from jbrazio/bugfix/compiler-warnings
...
Fixes misc gcc warnings
9 years ago
1bed392c68
HAS_Z_ENDSTOP_SERVO => HAS_Z_SERVO_ENDSTOP
9 years ago
47ce810f52
Remove support for XY servo endstops
9 years ago
d1e5dc6319
Fixes misc gcc warnings
9 years ago
c5eecb11b2
Follow-up the PR #4055 (Croatian language support)
...
・Update a forgotten Configuration.h of Cartesio
9 years ago
d991a4c24a
Merge pull request #4063 from thinkyhead/rc_remove_swp_files
...
Delete mysterious .swp files from #3609
9 years ago
8d8cbef1de
Merge pull request #4055 from thinkyhead/rc_croatian_language
...
Croatian language support
9 years ago
ebbed2975e
Delete mysterious .swp files from #3609
9 years ago
02e5dad29a
Include Croatian in language listings
9 years ago
2015aad867
Tweak Croatian language file heading
9 years ago
884bc63fbe
Add Croatian language
9 years ago
ef3bef6b9e
Fix feedrate in gcode_T (max_feedrate is mm/s)
9 years ago
4640974e1b
Merge pull request #4060 from esenapaj/Follow-up-the-PR-#4053
...
Follow-up and improvement the PR #4053 (CNControls Cartesio UI Support)
9 years ago
106227540e
Follow-up and improvement the PR #4053 (CNControls Cartesio UI Support)
...
・Add implimantation of PR #3609 to configuration files of Cartesio
・Standardize macro names
9 years ago
008d0637dd
Fix gcode_T
9 years ago
114d9db7d0
Show babysteps on the LCD in mm, not steps
9 years ago
b410bf933b
Merge pull request #4053 from thinkyhead/rc_cartesio_redo
...
CNControls Cartesio UI Support
9 years ago
f639044c24
Merge pull request #3609 from jbrazio/feature/config-version
...
Adds versioning for Configuration.h & Configuration_adv.h
9 years ago
4d2cb70152
Cartesio UI Support
9 years ago
da90bbe0eb
Merge pull request #4010 from thinkyhead/rc_toolchange_adjust
...
Fixup position adjustment on toolchange
9 years ago
948c467e16
Merge pull request #4043 from AnHardt/save_delay
...
Introduce save_delay()
9 years ago
4b93989a77
MBL Z adjustment on toolchange
9 years ago
9c800d1f8c
Position adjustment for bed leveling
9 years ago
8c7babb70f
Merge pull request #4049 from esenapaj/Fix-for-the-PR-#4023
...
Fix for the PR #4023(Add macros to move servos)
9 years ago
1219310622
Introduce save_delay()
...
Introduce save_delay() for long delays what otherwise would cause
watchdog resets
Explizit lcd_set_custom_characters(false) at the end of bootscreen().
Else the charset is not proper set in case of LCD_PROGRESS_BAR.
9 years ago
44f091a413
Fix for the PR #4023(Add macros to move servos)
...
・Add missing ')'
9 years ago
c2b7ef1e7e
"e" was renamed to "eindex" in a previous commit
9 years ago
52ac2a62ee
Merge pull request #4013 from thinkyhead/rc_toolchange_no_move
...
Use "Tn S1" to change tools without moving
9 years ago
d2a00b74e3
Merge pull request #4004 from thinkyhead/rc_feedrate_in_gcode_T
...
Use linear feedrate in gcode_T, not volumetric
9 years ago
0ad26d0de8
Merge pull request #4034 from AnHardt/custom-splash-screen
...
Custom Splash Screen
9 years ago
741cda0e47
Follow-up the PR #3676(Advance extrusion algorithm – LIN_ADVANCE)
...
・Update forgotten example configurations
9 years ago
02b3d6b8d3
Custom Splash Screen
...
Custom Splash Screen for full graphic displays.
Too complicated for the hitachis without knowing what exactly to display.
On top of #4032
Realisation of an idea from #3996
9 years ago
78a48d7e3c
Merge pull request #4038 from thinkyhead/rc_fix_heater_off
...
Fix broken DISABLE_HEATER macro
9 years ago
ee5be92206
Fix broken DISABLE_HEATER macro
9 years ago
8d8180e028
Parse M905 args in Marlin_main.cpp
9 years ago
2b340f5acb
patch LIN_ADVANCE to use code_value_float
9 years ago
b708196770
Merge pull request #4032 from AnHardt/bootscreen-delay
...
Show bootscreen later
9 years ago
587de1b6b6
Merge pull request #3676 from thinkyhead/rc_lin_advance_feature
...
Advance extrusion algorithm – LIN_ADVANCE
9 years ago
b4fedec0d1
Show bootscreen later
...
Init display and show bootscreen later, but init display in `kill()`
to init outputs before the bootscreen delays but being able to display
kill errors.
9 years ago
08e2c5a6ea
Added and translated some strings from language_en
9 years ago
4d2119f83a
_lcd_move => _lcd_move_xyz
9 years ago
811967923a
Fix manual_move to move the correct E stepper
9 years ago
0d0b751498
Merge pull request #4023 from thinkyhead/rc_servo_macros
...
Add macros to move servos
9 years ago
4fbe818163
Add macros to move servos
9 years ago
b322ac4417
No need to check ULTIPANEL with DOGLCD
9 years ago
8ccd97e7cc
Updated all example configuration files
9 years ago
c7eeb09e8f
Merge pull request #4012 from Blue-Marlin/watchdoghealing
...
Heal the watchdog
9 years ago
7fb69e24fb
Use "Tn S1" to change tools without moving
9 years ago
2f1bf8373b
Merge pull request #4005 from thinkyhead/rc_prepare_move_destination
...
Clarify names of prepare_move functions
9 years ago
de8108648f
Added a versioning system to the config files
9 years ago
efe719f898
Heal the watchgog
9 years ago
b75e648f2c
Clarify names of prepare_move functions
9 years ago
ae9b09fe94
menu => screen
9 years ago
45ea8749d3
Wrap all items depending on ULTIPANEL
9 years ago
0e2bfd0769
Use linear feedrate in gcode_T, not volumetric
9 years ago
bf8710d522
Merge pull request #4001 from Blue-Marlin/manage_manual_move-ULTIPANEL
...
manage_manual_move(); -> ULTIPANEL
9 years ago
2c34ec2bac
Closes #3999 : Compilation error with BEEPER_PIN -1
9 years ago
378ff92e98
manage_manual_move(); -> ULTIPANEL
...
Makr the call of `manage_manual_move() ` depandent of `ULTIPANEL`
9 years ago
aad9c0ed8d
Apply updated ISR timing code
9 years ago
506d78b2f8
Run the advance_isr faster instead of doing multiple e-steps per interrupt
9 years ago
6d62a4ffc8
Patch LIN_ADVANCE for style and forward-compatibility
9 years ago
fb8e880734
Add LIN_ADVANCE
9 years ago
e2d4919c01
Merge pull request #3991 from thinkyhead/rc_axis_units
...
Rename some vars to clarify their relationship to acceleration
9 years ago
74060f17b7
Merge pull request #3995 from thinkyhead/rc_nonblocking_buzzer
...
New feature: Non blocking tone queue
9 years ago
a82c755a35
Fix BQ_LCD_SMART_CONTROLLER pin compiler warnings
9 years ago
5b5aa1572b
Non-blocking buzzer
9 years ago
72c6f2923f
axis_steps_per_unit => axis_steps_per_mm
9 years ago
446515ab79
Adjust spacing in block_t
9 years ago
80ab749563
Rename acceleration locals for clarity
9 years ago
3b08eb1eeb
`acceleration_st` => `acceleration_steps_per_s2`
9 years ago
cb4704e07a
Rename some planner acceleration vars
...
- `per_sq_second` => `per_s2`
- `per_sqr_second` => `per_s2`
- `axis_steps_per_sqr_second` => `max_acceleration_steps_per_s2`
9 years ago
3c68be79dc
Throw an error in PID_autotune for E < -1
9 years ago
26f8f54c56
Merge pull request #3985 from thinkyhead/rc_inch_fahrenheit_kelvin
...
Support inches, fahrenheit, and kelvin
9 years ago
f0a5b7f0bc
Merge pull request #3986 from thinkyhead/rc_mbl_forward_iteration
...
Use memset in mbl.reset to save 58 bytes
9 years ago
0b3142b45b
Remove redundant declarations from M100 code
9 years ago
4980ecc1f7
Smaller binary using inline gcode argument getters
9 years ago
16212432c9
G20/21 and M149 support, and code_value() refactor
...
This is an update of MarlinDev PR #196 .
G20/21: support for switching input units between millimeters and
inches.
M149: support for changing input temperature units.
In support of these changes, code_value() and code_value_short() are
replaced with an array of functions which handle converting to the
proper types and/or units.
9 years ago
a569e89775
Merge pull request #3978 from thinkyhead/rc_planner_local_rename
...
Rename some auto/locals to avoid name conflict
9 years ago
2d55862499
Use memset in mbl.reset to save 58 bytes
9 years ago
b23f710034
Cleanup and naming for num-to-string functions
9 years ago
3d56b9d127
Merge pull request #3979 from thinkyhead/mbl_cell
...
MBL: cel => cell
9 years ago
cca047424d
MBL: cel => cell
9 years ago
49ecaf774d
Rename some auto/locals to avoid name conflict
9 years ago
9171a3d94f
Update Czech language 2016/06/07
9 years ago
5e6fdbb4cb
Merge pull request #3963 from thinkyhead/rc_advance_steppers
...
Use e_steps[EXTRUDERS] instead of e_steps[4]
9 years ago
47b5c55c29
Implement the delayed-move technique
9 years ago
a3e25a0fca
Instead of trying to move now, set a flag to move asap
9 years ago
e2a8961635
Use e_steps[EXTRUDERS] instead of e_steps[4]
9 years ago
43947072d5
Merge pull request #3895 from thinkyhead/rc_singlenozzle_part_2
...
SINGLENOZZLE: EXTRUDERS versus HOTENDS
9 years ago
d7e4e8e9be
Fix a typo in #3955
9 years ago
c2362c1b3c
Apply Marlin coding standards to MBL class
9 years ago
c06de0f097
MBL: Added keeping MBL active when homing single axises for #3750
9 years ago
f2fb66c00d
With SINGLENOZZLE only set temperature for the active tool
9 years ago
cd441ce652
SINGLENOZZLE: EXTRUDERS versus HOTENDS
9 years ago
32f8300cc6
Merge pull request #3944 from thinkyhead/rc_eboston_lcd_contrast
...
Improved LCD contrast handling
9 years ago
9c87bf835c
Merge pull request #3947 from thinkyhead/rc_statics_stepper
...
Apply static to remaining Stepper methods
9 years ago
08871d4d6e
Merge pull request #3950 from boelle/patch-3
...
last of missing defines added
9 years ago
4e13cd3f35
Merge pull request #3955 from MagoKimbra/RCBugFix
...
Fix M428 width DELTA & SCARA
9 years ago
2403a1cf9c
Merge pull request #3952 from rafacouto/RCBugFix
...
Galician language update.
9 years ago
8529122af1
Merge pull request #3946 from thinkyhead/rc_g28_servo_raise_before_stow
...
Raise the servo probe before stow outside ABL context
9 years ago
f499be084a
Fix M428 width DELTA & SCARA
9 years ago
5f8db3f574
Galician language update.
9 years ago
8532bf4087
last of missing defines added
...
need to check line 101-103
9 years ago
81384dfd36
Apply static to remaining stepper methods
9 years ago
664b299a51
This fix is not DELTA compatible
9 years ago
064efb20e0
Also call clear_command_queue for lcd_sdcard_stop
9 years ago
6277395e1e
set_current_position_from_planner() after stepper.quick_stop()
9 years ago
381bc6f0b0
set_position => set_position_mm
9 years ago
663d2463dc
Merge pull request #3922 from thinkyhead/rc_statics_stepper
...
Apply static to Stepper class
9 years ago
194185539d
Merge pull request #3925 from thinkyhead/rc_statics_planner
...
Apply static to Planner class
9 years ago
3fd9b331f0
Merge pull request #3924 from thinkyhead/rc_statics_temperature
...
Apply static to Temperature class
9 years ago
db0fd021d0
Z raise options independent of ABL so G28 can use them
9 years ago
9eecb4404b
Make raise_z_after_probing null sometimes
9 years ago
28fb1f8994
Tweak #endif comment for ABL GRID
9 years ago
b3a37b493d
Patch G28 servo stow to use Conditionals, raise_z_after_probing
9 years ago
5390c846a5
Positive conditions for HAS_LCD_CONTRAST
9 years ago
efa7209acf
Improved LCD contrast handling
...
Based on MarlinFirmware/MarlinDev#200 from @eboston
9 years ago
b703fa9538
Add sanity check for SAV_3DGLCD display types
9 years ago
3aefa04386
Raise the servo probe before stow outside ABL context
9 years ago
9729e9c450
Combine ST7565 / U8GLIB_NHD_C12864 items in dogm
9 years ago
f331763eca
Merge pull request #3829 from thinkyhead/rc_fix_T_command
...
Fix bad movement in gcode_T when switching extruders
9 years ago
67f816ff79
Merge pull request #3926 from thinkyhead/rc_statics_endstops
...
Drop FORCE_INLINE from endstops.h
9 years ago
2bd4f33369
Merge pull request #3928 from thinkyhead/rc_allen_key_cleanup
...
Remove excess allen key probe examples from configs
9 years ago
d698c89971
Fix bad movement in gcode_T when switching
9 years ago
1a01a44a94
Merge pull request #3936 from thinkyhead/rc_sav_mk1
...
Support for SAV_3DGLCD OLED LCD controller
9 years ago
4770d7c346
Merge pull request #3933 from boelle/patch-2
...
added defines present in en but not in da
9 years ago
c6c01eaaac
Merge pull request #3888 from thinkyhead/rc_slower_max31855
...
Slower SPI speed for MAX31855
9 years ago
a0b000d752
Support for SAV_3DGLCD OLED LCD controller
9 years ago
bd97bbc52a
Make HAS_LCD_CONTRAST a boolean flag
9 years ago
bc77670673
Merge pull request #3929 from thinkyhead/rc_fix_printrboard_dac
...
Need to call dac_init() in setup() for DAC_STEPPER_CURRENT
9 years ago
a1a8240606
added defines present in en but not in da
9 years ago
5eb7a79d93
initial changes to DA
9 years ago
55ef04a566
Need to call dac_init() in setup() for DAC_STEPPER_CURRENT
...
As reported by https://github.com/MarlinFirmware/Marlin/pull/3182#issuecomment-222595488
9 years ago
43a71ef226
Remove excess allen key probe examples from configs
9 years ago
1582ed43bf
Merge pull request #3918 from epatel/marlin/mbl_negative_xy_adv
...
MBL: Move border macros to Configuration_adv.h
9 years ago
ff53819856
Drop FORCE_INLINE in planner.h
...
This change actually does increase the binary size by about 12 bytes,
but how does it affect performance?
9 years ago
e60224a943
Drop FORCE_INLINE from endstops.h
...
`FORCE_INLINE` seems to have no effect with standard optimization.
9 years ago
85512e9372
Drop FORCE_INLINE from temperature.h
...
`FORCE_INLINE` seems to have no effect on code generation with standard
optimization.
9 years ago
78fb02a5ad
Apply static to Temperature class
9 years ago
c3df293fc6
Merge pull request #3923 from thinkyhead/rc_statics_endstops
...
Apply static to Endstops class
9 years ago
02735fd500
Merge pull request #3921 from thinkyhead/rc_calc_timer_tweak
...
Tiny calc_timer speedup
9 years ago
668d50f68e
Keep Stepper encapsulation, use static data and methods
9 years ago
26f866b908
Apply static to Endstops class
9 years ago
470d5ac09f
Apply static to Planner class
9 years ago
ecfdcf7250
Tiny calc_timer speedup
9 years ago
06593833ff
MBL: Move border macros to Configuration_adv.h
9 years ago
ffe55c230d
Merge pull request #3914 from thinkyhead/rc_fix_lcd_contrast
...
Patch conditionals for DEFAULT_LCD_CONTRAST, MINIPANEL
9 years ago
d3efc96289
Patch conditionals for DEFAULT_LCD_CONTRAST, MINIPANEL
...
- `DEFAULT_LCD_CONTRAST` was incorrectly overriding all `DOGLCD`
- `MINIPANEL` conditionals are identical to `MAKRPANEL`
9 years ago
92a27c37b3
MBL: Apply https://github.com/MarlinFirmware/Marlin/pull/3903 to example_configurations
9 years ago
3861f1e0da
Merge pull request #3908 from jbrazio/bugfix/3826
...
Closes #3826 : SD printing will now pause and stop the print counter
9 years ago
8806c7bbcc
Merge pull request #3903 from epatel/marlin/mbl_negative_xy
...
MBL: Fix for negative x/y positions
9 years ago
dc22097b3a
Fix some of array initializations
...
- In `stepper.h` init `count_direction` array
- In `ultralcd.cpp` init `autotune_temp` array
9 years ago
40e64b36de
Closes #3826 : SD printing will now pause and stop the print counter
...
The LCD menu items for SD printing pause/stop have been updated to control
also the print job timer. This commit also fixes a small output bug with
M78, the failed print counter was displaying the wrong value.
9 years ago
eb2746a34f
MBL: Fix for negative x/y positions
9 years ago
fe3122774a
Merge pull request #3806 from thinkyhead/rc_coreyz_support
...
Support for COREYZ. Fixes for COREXY, COREXZ
9 years ago
fad7680605
Slower SPI speed for MAX31855
9 years ago
30f6b84561
Merge pull request #3812 from thinkyhead/rc_mbl_index_finders
...
Two index finding functions for MBL
9 years ago
89e630b2fb
Merge pull request #3808 from thinkyhead/rc_singlenozzle
...
SINGLENOZZLE
9 years ago
827738a790
set_z parameters marked const
9 years ago
9049f4084b
EEPROM report uses G29 S3
9 years ago
4955163959
Propose simpler probe index methods
9 years ago
a1a5cb5393
Propose simpler cel index methods
9 years ago
360adc6a3b
Small reduction in M421 code
9 years ago
a4ed988c60
Two index finding functions for MBL
9 years ago
0e55c06f7d
Rename CORE_AXIS_3 to NORMAL_AXIS
9 years ago
5172d4ba40
COREYZ stepper, planner, endstop, babysteps
9 years ago
6c7f4909b1
COREYZ Conditionals, SanityCheck for only a single kinematic
9 years ago
95fee8ca81
Add option for CoreYZ kinematics
9 years ago
678cbad76a
Merge pull request #3819 from jbrazio/bugfix/followup-3813
...
Followup for #3813
9 years ago
bb66ffb2ae
Correct hardware endstops default
...
All credits to RicardoGA
9 years ago
75221fa673
Followup for #3813
9 years ago
f9b4b90058
Merge pull request #3813 from jbrazio/bugfix/3809
...
Stopwatch and PrintCounter improvements
9 years ago
8c0edb2de4
Fixes #3809 and adds several improvements to the Stopwatch and
...
PrintCounter classes
9 years ago
c5130fd23b
Additional instructions for controller reverse options
9 years ago
cadf441059
Merge pull request #3798 from AnHardt/extend-M421
...
Extend M421 with I and J parameters
9 years ago
0c7c45063b
PID_ADD_EXTRUSION_RATE based on MarlinKimbra
9 years ago
92ac133f2b
Conditionals and Sanity Check for SINGLENOZZLE
9 years ago
69abfef82e
Add "SINGLENOZZLE" extruder option
9 years ago
f5a036510f
Extend M421 with I and J parameters
...
Extend M421 with I and J parameters
9 years ago
2f6e7b7b9b
Merge pull request #3805 from MatixYo/patch-7
...
Update language_pl.h to the latest strings
9 years ago
1a6c72cb57
Apply to the rest of the configs
9 years ago
37c6d0f4ed
Reword MESH_G28_REST_ORIGIN comment
9 years ago
c7d90dc5ec
Add option to configure G28 all axis resting position for MBL
9 years ago
bbe4c20ef6
Update language_pl.h
9 years ago
319d184999
Merge pull request #3803 from jbrazio/feature/buildroot-cleanup
...
Buildroot cleanup
9 years ago
a469341555
Merge pull request #3800 from jbrazio/feature/move-felix-cfg
...
Moves Felix's dual configuration to a folder
9 years ago
14652bb141
Moves shared helper scripts to the buildroot
9 years ago
80f05920c5
Moves Felix's dual configuration to a folder
9 years ago
8218558953
Update comments, rename next_ping_ms, followup to #3797
9 years ago
6d68b12e28
Merge pull request #3797 from AnHardt/fix-screen-updatedelay
...
Rework intermediate idle() and manage_heater() calls in G2/G3 and G5
9 years ago
e761bdbb4b
Remove SF_ARC_FIX from G5 (Cubic B-spline)
...
Remove SF_ARC_FIX from G5 (Cubic B-spline).
SF_ARC_FIX is a fix for G2/G3 (arcs) where Skeinforge always produced relative instead of absolute coordinates for the endpoint of an arc.
It's very unlikely this is also a problem with Cubic B-splines. More likely is copying from the G2/G3 code.
9 years ago
2207001333
No compromises for the manage_heater()
...
No compromises for the manage_heater(). manage_heater() will return immediately when there is nothing to do, but needs a constant detaT to work proper.
Calling idle() only every 200ms results in a display update every ~2 seconds - that should be enough.
For the other functionalities in idle() and manage_inactivity() 200ms is a lot but hopefully works.
9 years ago
0c4d885d5b
Speedup sreen update delay
...
Speedup sreen update delay
and correct a comment.
A module division by 10 is slooooow. (powers of 2 are fast - but then you can AND a bitmask with the same result)
9 years ago
9d416289cc
Update Galician language to 1.1.0-RCBugFix.
9 years ago
07c9a11c3c
Automatically set X2 stepper pins
9 years ago
8aa591ca09
Merge pull request #3789 from jbrazio/feature/m999-s-arg
...
Implements S1 argument in M999
9 years ago
138c5c8378
Merge pull request #3788 from thinkyhead/rc_dual_x_compile_fix
...
DUAL_X_CARRIAGE fixes, improvements, Travis test
9 years ago
e6effb8f35
Implements S1 argument in M999
9 years ago
2a7b1a85f7
Improve DUAL_X_CARRIAGE sanity check errors
9 years ago
516e79bbda
Declare extruder_duplication_enabled in Marlin.h
9 years ago
56d5ae596c
Update Japanese trasration
...
・Add new translation
・Change translation
9 years ago
4041508ffb
Function decl. in headers don't need "extern"
9 years ago
82c2d308dc
Merge pull request #3783 from thinkyhead/rc_bezier_delta_fix
...
Bezier style and DELTA patch
9 years ago
ecec5c5e58
Bezier style and DELTA patch
9 years ago
d66e53c42b
Merge pull request #3782 from thinkyhead/rc_home_z_before_g29
...
Require homing of Z before G29
9 years ago
552516ddf5
Merge pull request #3781 from AnHardt/minor-delta-segmenting-speedup
...
Minor DELTA segmentation speedup
9 years ago
a28970784c
XYZ unhomed
9 years ago
a9926b71a4
Require homing of Z before G29
9 years ago
41e9569dbc
Minor DELTA segmentation speedup
...
Minor DELTA segmentation speedup by pulling calculations out of the loop.
9 years ago
3016dfe484
Merge pull request #3744 from thinkyhead/rc_bezier_curves
...
Add BEZIER_CURVE_SUPPORT — G5 command
9 years ago
d0ac4541d3
Merge pull request #3775 from jbrazio/bugfix/followup-3770
...
G29: Report final position back to host when using MBL
9 years ago
b6a3aef297
G29: Report final position back to host when using MBL
9 years ago
95f30529a6
Add stowing process for MECHANICAL_PROBE
9 years ago
e2b87f6c85
Separate Z_PROBE_ALLEN_KEY from MECHANICAL_PROBE
9 years ago
58339aea5f
Merge pull request #3769 from jbrazio/bugfix/iteration-invokes-undef-behavior
...
Bugfix: iteration invokes undefined behavior
9 years ago
26b4cb5b42
Merge pull request #3771 from thinkyhead/rc_auto_fans_again
...
Fix checkExtruderAutoFans
9 years ago
c9271e610b
Merge pull request #3762 from jbrazio/bugfix/lcd-hide-bed-icon
...
Remove the hotbed icon from the status screen
9 years ago
2f14934c65
Fix checkExtruderAutoFans
...
Make sure to only set the fan state once when extruders share a fan
9 years ago
ecd490ed49
Bugfix: iteration invokes undefined behavior
9 years ago
abdfd914f8
Merge pull request #3763 from esenapaj/patch-4
...
Follow-up for #3720 and #3759
9 years ago
754b0152f5
Fix MBL zigzag calls
9 years ago
6d722716f7
Follow-up the PR #3720 and #3759
...
Update forgotten Configuration_DUAL.h
9 years ago
451000387d
Remove the hotbed icon when HAS_TEMP_BED is false
9 years ago
a058226799
Prevent watchdog timeout in bezier moves
9 years ago
13175ce7da
Fix error checking in M421
9 years ago
bc5a547d55
More robust MBL index / point conversion
9 years ago
a3520b6f01
More precision in M503 output for MBL's M421
9 years ago
1b90682617
Merge pull request #3702 from thinkyhead/rc_sensitive_fan_pins
...
Remove need to define unused pins as -1 in pins files
9 years ago
c8a40f06a6
Merge pull request #3759 from thinkyhead/rc_more_printcounter
...
Printcounter bugfix and some new features
9 years ago
585c8a918f
Merge pull request #3758 from thinkyhead/rc_verbiage
...
Tweaks to some verbiage
9 years ago
f9a62f6a8e
Added PRINTJOB_TIMER_AUTOSTART section to example config files
9 years ago
8a18c52002
Adds an option to disable print job timer auto start
9 years ago
a79267217b
M78 now allows stats reset using the S78 argument
9 years ago
b660f1bdb8
Bugfix: Multiple M77 no longer increment the print counter
9 years ago
c63f95f2fe
Merge pull request #3748 from clexpert/patch-1
...
Lastest changes in Czech translate
9 years ago
e01e52969e
Merge pull request #3757 from thinkyhead/rc_fix_auto_fans
...
Don't try to enable unused auto fans
9 years ago
ddf3e1e22d
Tweaks to some verbiage
9 years ago
a713043acd
Merge pull request #3749 from esenapaj/patch-3
...
Enclose all #error strings by double-quotes
9 years ago
3cfea3ff12
Merge pull request #3752 from AnHardt/fix-FIX_MOUNTED_PROBE
...
G29 missing FIX_MOUNTED_PROBE condition
9 years ago
08dfe08f9a
Merge pull request #3754 from jbrazio/feature/update-pt_PT
...
Updated pt_PT language pack
9 years ago
596ebccd54
Merge pull request #3753 from jbrazio/feature/followup-3740
...
Warn user about useless of individual axis homing and DELTA kinematics
9 years ago
6e3556cb75
Merge pull request #3746 from esenapaj/patch-2
...
Update Japanese translation
9 years ago
ddac17a195
Add BEZIER_CURVE_SUPPORT (G5 XYZEFIJPQ)
9 years ago
b4c891dfd2
Remove obsolete reference to prepare_arc_move
9 years ago
9f6b8f7d5b
Remove extra @section directive from configs
9 years ago
4d6bb52b26
Don't try to enable unused auto fans
...
Addressing #3743
9 years ago
f13c4a9ec4
Merge pull request #3720 from jbrazio/feature/host-keepalive
...
Removes the DISABLE from HOST_KEEPALIVE
9 years ago
596f15348d
Updated pt_PT language pack
9 years ago
d7522152e1
Warn user about useless of individual axis homing and DELTA kinematics
9 years ago
8a4376d51f
Idle during long arcs
...
Idle during long arcs
to prevent from watchdog resets during high segmented fast arcs.
9 years ago
888443ca1e
Enclose all #error strings with apostrophes
9 years ago
50b1a6bb2b
Lastest changes in Czech translate
9 years ago
b74af78736
Make arc support (G2/G3) configurable
...
Saves about 2669 bytes when deactivated. (About 1% for a AT2560, about __4%__ for a AT644!)
9 years ago
aef2559bd8
fix-FIX_MOUNTED_PROBE
...
Add a forgotten condition
9 years ago
e9d851137d
Update Japanese translation
...
・Add new translation
9 years ago
14cd0f4c92
Merge pull request #3740 from thinkyhead/rc_lcd_home_options
...
Individual Axis Homing LCD menu items
9 years ago
69511b5e5e
Follow-up the PR #3719(Harmonize LCD comment section)
...
It update forgotten Configuration_DUAL.h.
9 years ago
675e92ab1f
Merge pull request #3738 from thinkyhead/rc_limit_i2c_request
...
Print an error on bad i2c request
9 years ago
09150cae79
Individual Axis Homing LCD menu items
9 years ago
4dc4e2063f
Add REVERSE_ENCODER_DIRECTION option
9 years ago
aaeadf0cbd
If no "B" parameter given, get 1 byte
9 years ago
a6d594665b
Print an error on bad i2c request
...
Reference: https://github.com/MarlinFirmware/Marlin/pull/3713#issuecomment-218333678
9 years ago
85b2c80838
Updated example configurations
9 years ago
ac7f634956
Removed the DISABLE from HOST_KEEPALIVE_FEATURE option
9 years ago
a454a88f9c
Merge pull request #3722 from jbrazio/bugfix/printcounter
...
Minor #warning fix for PrintCounter
9 years ago
03bda5c141
Merge pull request #3719 from jbrazio/feature/update-configs
...
Harmonize LCD comment section
9 years ago
c827671299
Mention Z_PROBE_ALLEN_KEY in probe sanity checks
9 years ago
be5d17de17
Merge pull request #3713 from thinkyhead/rc_file_offset_long
...
Use code_value_long for potentially large values
9 years ago
56dd31ea3c
Use code_value_long for potentially large values
...
Addressing #3711
9 years ago
eafa16a781
Minor #warning fix for PrintCounter
9 years ago
5373ac6373
Updated example configurations
9 years ago
aa5a4716cf
Update default config
9 years ago
1a75509a3c
Cleanup for Danish file
...
・Arrange the strings in unified order
・Remove "#ifdef DELTA_CALIBRATION_MENU" directive
・Adjust spacing
9 years ago
cf6c607425
Update Japanese translation
...
・Add new translation
・Add translation for 16 width ASCII LCD
・Change translation
・Revert translation from Japanese to English
・Fix typo
9 years ago
6f36b7c1cd
Merge pull request #3224 from yarda/fix-melzi2-arduino-1.6.x
...
Fixed Makefile to work with Melzi2 boards on arduino-1.6.x
9 years ago
050e0bd2af
Merge pull request #3705 from thinkyhead/rc_runaway_logic
...
Fallthru in thermal runaway test when TRState changes
9 years ago
5f7ad16b19
Merge pull request #3707 from thinkyhead/rc_fix_delta_blocking_move
...
Fix dipping on DELTA robots during G29
9 years ago
96b71e62c0
Fix dipping on DELTA robots during G29
...
- Addressing #3689 , et. al.
9 years ago
ea1dd31851
Enclose #error strings with apostrophes in quotes
9 years ago
9b92bb8f31
Set the initial state based on target temperature
9 years ago
6b13c430ae
The TRReset state is not needed with fall-through
9 years ago
c2522ce1f5
Fallthru in thermal runaway test when TRState changes
9 years ago
d32d9a3c5c
Merge pull request #3672 from thinkyhead/rc_consolidate_probe_flags
...
Cleanup and consolidate probe conditionals for clarity
9 years ago
15fc93d742
Cleanup and consolidate probe conditionals for clarity
9 years ago
5ca6334fd2
Cleanup pins files, fixup analogtodigitalpin, etc.
9 years ago
9186be7b83
Fix compilation error in debugging code
...
Fix compilation error in Thermal Runaway debugging code
9 years ago
51109d4af7
Use AxisEnum with _lcd_babystep()
9 years ago
b65ea98d6b
Localize babystepping in the Temperature class
...
So that `ultralcd.cpp` doesn’t need to worry about the details.
9 years ago
0c7beb832c
Merge pull request #3681 from esenapaj/patch-1
...
Follow-up the PR #3643(Temperature singleton)
9 years ago
fc5fe2cc22
Merge pull request #3678 from jbrazio/rework/delta-diagonal-rod-timmers
...
Moved DELTA radius/rod default trimmer values to Conditionals.h
9 years ago
1a97442d19
Follow-up the PR #3643(Temperature singleton)
...
Follow-up the PR #3643(Temperature singleton)
・Change from fanSpeedSoftPwm[0] to thermalManager.fanSpeedSoftPwm[0] in planner.cpp
It fix compilation error when FAN_SOFT_PWM is enabled.
・Remove declaration of setExtruderAutoFanState() in temperature.h
Because that function was abolished.
・Change from babystepsTodo to thermalManager.babystepsTodo in ultralcd.cpp
It fix compilation errors when BABYSTEPPING is enabled.
9 years ago
4f6120f70f
Merge pull request #3643 from thinkyhead/rc_singletons_plus_temperature
...
Temperature singleton
9 years ago
084f6b5b44
Temperature singleton class
9 years ago
142bd3f3e7
Disable THERMAL_PROTECTION_BED with no sensor
9 years ago
13f85a2b50
Can't use the ENABLED macro as a boolean
9 years ago
23567a1d8b
Moved DELTA radius/rod default trimmer values to Conditionals.h
9 years ago
b4b5c7a6b7
Merge pull request #3670 from thinkyhead/rc_scoovo_controller
...
Use directional buttons when defined
9 years ago
6398d497b3
Ultimate followup to Stepper/Planner patch
...
- Search all symbols and apply prefixes where needed
- Encapsulate some private methods
- Inline some setters
- Make `microstep_mode` a public method
9 years ago
ddafb859e2
Use directional buttons when defined
9 years ago
b959020532
Merge pull request #3667 from esenapaj/patch-1
...
Additional follow-up the PR #3631(Encapsulate S...
9 years ago
212b17d510
Fix for PR #3526(Configuration.h LCD & SDCard s...
...
Fix for PR #3526(Configuration.h LCD & SDCard section rewrite)
It removes duplicated BQ_LCD_SMART_CONTROLLER.
9 years ago
605808fe37
Additional follow-up the PR #3631(Encapsulate S...
...
Additional follow-up the PR #3631(Encapsulate Stepper, Planner, Endstops in singleton classes)
・Change from abort_on_endstop_hit to stepper.abort_on_endstop_hit in endstop.cpp, Marlin_main.cpp, and ultralcd.cpp
・Add include path to cardreader.h and temperature.h in endstop.cpp(for CardReader class and disable_all_heaters())
It fix compilation error when ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED and SDSUPPORT are enabled.
・Change from digipot_current() to stepper.digipot_current() in Marlin_main.cpp
・Change from digitalPotWrite() to stepper.digitalPotWrite() in Marlin_main.cpp
It fix compilation errors when HAS_DIGIPOTSS is enabled.
・Change from microstep_mode() to stepper.microstep_mode() in Marlin_main.cpp
・Change attribute of microstep_mode() from private to public in stepper.h
・Change from microstep_readings() to stepper.microstep_readings() in Marlin_main.cpp
・Change from microstep_ms() to stepper.microstep_ms() in Marlin_main.
It fix compilation errors when HAS_MICROSTEPS is enabled.
9 years ago
7fd0243048
Cleanup, debug strings in Planner::adjusted_position
9 years ago
85e732d5fd
Fix BABYSTEPPING, add it to Travis test
9 years ago
37c4970d87
Merge pull request #3660 from esenapaj/patch-2
...
Follow-up the PR #3631(Encapsulate Stepper, ...
9 years ago
ad27d3c523
Merge pull request #3659 from esenapaj/patch-1
...
Some clean-up for example configuration files
9 years ago
f1c1a8dc59
Merge pull request #3661 from Blue-Marlin/83filen2
...
8.3-filenames second try
9 years ago
0bae00c1ed
Merge pull request #3644 from tkurbad/german_translation
...
Revisited German translation
9 years ago
5ad7d263e9
8.3-filenames second try
...
Fix for #6 3593, #3648
this time excludung 'DEL' instead of accidently '~'.
9 years ago
aae2f502e0
Revisited German translation
9 years ago
a82cfcff2d
Follow-up the PR #3631(Encapsulate Stepper, ...
...
Follow-up the PR #3631(Encapsulate Stepper, Planner, Endstops in singleton classes)
plan_bed_level_matrix -> planner.bed_level_matrix in multi extruders section of Marlin_main.cpp
It probably fix the Issue #3658(plan_bed_level_matrix not declarate).
movesplanned() -> planner.movesplanned() in ADVANCED_OK section of Marlin_main.cpp
It fix compilation error when ADVANCED_OK is enabled
9 years ago
2fa4bc344c
Some clean-up for example configuration files
...
Some clean-up for example configuration files
Follow-up and fix the PR #3253(Make the Autotune item(s) in the LCD menu optional):
・Update forgotten file(Felix/Configuration_DUAL.h)
Follow-up the PR #3526(Configuration.h LCD & SDCard section rewrite):
・Add section of RigidBot Panel to RepRapWorld/Megatronics/Configuration.h
Follow-up the PR #3576(Z Safe Homing for all):
・Adjust spacing
Follow-up and fix the PR #3625(Print job statistics):
・Update forgotten file(Felix/Configuration_DUAL.h)
・Remove ambiguous character "f" in top of RigidBot/Configuration.h
9 years ago
da47b83b3d
Revert PR 3648 to fix SD printing
...
The character 0x7E is common in 8.3 filenames. Maybe the last condition
should be removed completely instead.
9 years ago
60c6efb75c
Merge pull request #3653 from thinkyhead/rc_bed_temp_watch_merge
...
Introduce temp watch protection for the bed
9 years ago
5b7a6c217a
Include more fans in sensitive pins list
9 years ago
f508c54c6c
Use #undef in AZTEEG_X3_PRO for RAMPS overrides
9 years ago
c6f1337f5c
NOOP macro for do-nothing macros
9 years ago
c2145566c7
Merge pull request #3631 from thinkyhead/rc_singletons
...
Encapsulate Stepper, Planner, Endstops in singleton classes
9 years ago
fbf69081b4
Updated comment for THERMAL_PROTECTION_BED
9 years ago
908229dbb3
Introduce temp watch protection for the bed
...
When setting the bed temp via M140/M190 if the thermistor does not read an increase of WATCH_BED_TEMP_INCREASE degrees by WATCH_BED_TEMP_PERIOD seconds then it will throw "Error:Heating failed, system stopped! Heater_ID: bed" and call the kill() function.
Conflicts:
Marlin/Configuration_adv.h
9 years ago
77d6e5283b
Merge pull request #3648 from Blue-Marlin/83filenames
...
Don't reject 8.3-filenames with chars > 0x7f
9 years ago
24a15332b3
Encapsulate dual Z endstop handling
9 years ago
462a8a951e
A little extra gcode_T spacing
9 years ago
96f51f400f
Planner singleton class
9 years ago
5076d12344
Localize M119 in Endstops class
9 years ago
5e4e535ce8
Stepper and Endstops as singleton objects
9 years ago
6d3e4e1f8f
Prevent stuck M109/M190 when target is changed
9 years ago
ac4caab8f1
Don't mangel 8.3-filenames with chars > 0x7f
...
Don't mangel 8.3-filenames with chars > 0x7f
Windows produces 8.3filenames wit chars > 0x7f. Those have been rejected
by Marlin until now.
With these 'malformed' filenames can now be worked with:
In the LCD menue
With RepetierHost (V1.6.1 tested) - full support. Characters are
displayed as '?'
With Octoprint (1.2.10 tested) the files do not appear in the files
area. At the console, listed with M20 they appear with a '�'.
With Pronterface the files appear in the sd-window but you can't start
them. They are mangled by pronterface. The names are altered and than
recected by Marlin. In the console they apper with differen but not the
correct characters.
All in all a little step forward.
Fix for #3593
9 years ago
eeef571be2
Merge pull request #3613 from thinkyhead/rc_acceleration_fix1
...
Fix an acceleration anomaly by making locals signed
9 years ago
c3ef9993b9
Merge pull request #3625 from jbrazio/feature/print-counter
...
Print job statistics
9 years ago
96b2b3f4fe
Merge pull request #3642 from thinkyhead/rc_quieter_wait_for_temps
...
Keepalive not needed while waiting for temperatures
9 years ago
e34f4653ef
Fixed a typo on the configuration files
9 years ago
1491d682fb
Miscellaneous tweaks on PrintCounter
9 years ago
27088e356f
Updated example configuration files
9 years ago
8fb23e899f
PrintCounter EEPROM read/write optimizations
9 years ago
9589e51810
Disable DEBUG_PRINTCOUNTER
9 years ago
e2da7e5000
Updated the default configuration and fixed a printcounter.h typo
9 years ago
d6cfcc9c8b
Added new G-Code: M78
9 years ago
4f541c5bb5
Added a new object: PrintCounter
9 years ago
26b166d7cf
Made all stopwatch::debug() calls static
9 years ago
5897b58a70
Merge pull request #3634 from esenapaj/patch-2
...
Update distribution date and readme again
9 years ago
f4706bb90e
Keepalive not needed while waiting for temperatures
9 years ago
924285afa6
Merge pull request #3641 from thinkyhead/rc_reverse_menu_doc
...
Correct the REVERSE_MENU_DIRECTION comment
9 years ago
f1b00eb12b
Correct the REVERSE_MENU_DIRECTION comment
9 years ago
8905908081
Merge pull request #3632 from thinkyhead/i3_millie_language_fun
...
Simplified LCD Language settings
9 years ago
6c48852b20
Update distribution date
9 years ago
2142d5a62e
Merge pull request #3627 from Blue-Marlin/German-again-and-again-and-agin
...
Correct an error in lang_de
9 years ago
0c11566f42
Replace LANGUAGE_INCLUDE with LCD_LANGUAGE
9 years ago
259794c0be
Make DISPLAY_CHARSET_HD44780 a single setting
9 years ago
e89f01d044
Correct an error in lang_de
...
There is no way to translate "A-travel" to "A Rückzug". Thats simply
wrong.
9 years ago
ee2f37f3cc
Update distribution date and readme
...
It sync with the RC.
9 years ago
ad0f70f2f3
Merge pull request #3620 from Blue-Marlin/feedrate_atfer_toolchange
9 years ago
d58c5ac446
Merge pull request #3618 from esenapaj/patch-1
9 years ago
2bb5cf5291
Merge pull request #3622 from floyd871/patch-1
9 years ago
e58e281473
Fix feedrate after toolchange
...
The fix is simple. Most changes are because of changed indendation,
bacause of leaving early for wrong tool number
9 years ago
32d798fcc7
Converted all files on src to Unix file format
9 years ago
59cfc84dad
German "Umlaute"
...
We don't have to avoid German "Umlaute" any more.
9 years ago
4dfc496965
added recalc_delta_settings() call in Config_RetrieveSettings. Appears to be necessary any time delta-related parameters (M665) are modified
9 years ago
ec82e1e05d
Merge pull request #3616 from thinkyhead/rc_fixup_some_movement
...
General cleanup around high level move functions
9 years ago
abeab792cb
General cleanup around high level move functions
...
- Use new `DEBUG_POS` macro for `DELTA` debug
- Neaten up `prepare_move` a smidgen
- Remove an old commented `prepare_move()` line
9 years ago
66540f8b84
Merge pull request #3615 from thinkyhead/rc_whats_up_with_M112
...
Report current position to host after M206 / M428
9 years ago
68d0347e67
Call report_current_position after M206 / M428
9 years ago
dcb4cdaa9e
Call report_current_position instead of gcode_M114 directly
9 years ago
e38baaa23e
Fix an acceleration anomaly by making locals signed
9 years ago
739dcda0f1
Renamed stopwatch::status to stopwatch::state
9 years ago
840e13f664
Introduce M108 cancel heatup for the hotend and bed
...
This G-code is asynchronously handled in the get_serial_commands() parser.
9 years ago
fce1e843b9
Patch steps rate comment in trapezoid function
9 years ago
7de0161204
Updated example config files
9 years ago
3b6f75511f
Updated multiple pins files
9 years ago
170f7e8a45
Rework Marlin's versioning system
9 years ago
8d0b2f358a
Cleanup for language files
...
・Remove abolished strings (MSG_NOZZLE1, MSG_NOZZLE2)
・Remove duplicated strings
・Arrange the strings in unified order
・Adjust spacing
・Remove some comments in Japanese files(follow-up the PR #3560 )
The most part of these changes were salvaged from closed my PR#3550.
9 years ago
2bb56ef6de
Merge pull request #3597 from thinkyhead/rc_fix_g29_debug
...
Move G29 debug output before matrix.set_to_identity()
9 years ago
a901555da4
Moved G29 debug output before matrix.set_to_identity()
9 years ago
88c6693b9e
Fix a typo in #3586 to fix MBL
9 years ago
aaf9d19954
Allow Z_SAFE_HOMING to compile without a probe
9 years ago
92ab2c7dd8
Merge pull request #3587 from thinkyhead/rc_z_safe_homing_deps
...
Define dependencies for Z_SAFE_HOMING if left out
9 years ago
63142eef40
Define dependencies for Z_SAFE_HOMING if left out
9 years ago
173334e535
Merge pull request #3418 from jbrazio/translate/danish
...
Missing Danish translation
9 years ago
fe4fc88494
Closes #3351 : missing Danish translation
9 years ago
003aab6dfd
Revert MBL menus to "known" working point
9 years ago
6fac4d9211
Merge pull request #3579 from thinkyhead/rc_fix_dogm_and_mbl_menus
...
Fix menu redraw for DOGLCD, improve MBL
9 years ago
7ddaa79ffe
Merge pull request #3578 from thinkyhead/rc_fix_twibus_less_debug_code
...
Reduce PROGMEM usage by TWIBus, stopwatch
9 years ago
cfd10fcba1
Merge pull request #3577 from thinkyhead/rc_fix_G92_set_e_twice
...
Fix G92 setting E twice
9 years ago
dc2281d2f4
Add nextMenu, nextEncoderPosition to change menus after handler loop
9 years ago
7fa2bda1b9
Give the "alive dot" its own blink
9 years ago
9d5e1f32fd
Use axis_homed in _lcd_level_bed_homing, item in Prepare before homing
9 years ago
0c2aa92b07
Z Safe Homing for all
...
The `Z_SAFE_HOMING` feature is coupled with probes and not leveling, so
make it available for general use.
9 years ago
9bcb72e7f8
Further patches to MBL - break up into more handlers
9 years ago
3f6ae85748
Fix some MBL display issues for DOGLCD
9 years ago
71b4f189bf
lcd_implementation_drawedit can take 1 arg
9 years ago
1caa2628da
Use sync_plan_position_e function elsewhere
9 years ago
c7df961144
Fix G92 so it only sets the plan position once
9 years ago
1addb50b62
Shrink debug code in TWIBus and disable by default
9 years ago
21a6b66807
Shrink debug code in Stopwatch and disable by default
9 years ago
e523a0dc61
Fix bug in TWIBus ctor declaration
9 years ago
ee9bd66a68
Add comments to debug bit flags
9 years ago
3db5a75f30
Merge pull request #3568 from thinkyhead/rc_various_fixes
...
General code cleanup, improved naming, etc.
9 years ago
8a2587f017
Read size for MAX6675 from sizeof(max6675_temp)
9 years ago
ac69fad96d
lowercase "stop" function
9 years ago
39ee9c526b
setTargetedHotend => get_target_extruder_from_command
9 years ago
cafa8b8ce3
Rename filament runout items
9 years ago
27b2e2e786
Document some variables
9 years ago
a4062a47ac
Rename baricuda variables
9 years ago
78747b1328
min_pos/max_pos => sw_endstop_min/sw_endstop_max
9 years ago
ba84d8d091
Allow setting PIDTEMP and PIDTEMPBED together or apart
9 years ago
5cb8ec68ae
Merge pull request #3566 from thinkyhead/rc_babystep_show_steps
...
Show steps done in the babystep display
9 years ago
3083ee49f3
Merge pull request #3567 from thinkyhead/rc_mf_bash_scripts
...
Git helper shell scripts for MarlinFirmware
9 years ago
00d36d10e2
Merge pull request #3560 from thinkyhead/rc_better_graphical_lcd
...
Aesthetic, functional improvements for Graphical Display
9 years ago
dd94ce5bd5
Merge pull request #3565 from thinkyhead/rc_look_at_3563
...
Output error message for M303 if PIDTEMP is disabled
9 years ago
9a12054e0e
Git helper shell scripts for MarlinFirmware
9 years ago
4f04bf7fe8
Show steps done in the babystep display
9 years ago
d988708ceb
Merge pull request #3559 from esenapaj/patch-1
...
Update and change Japanese translation
9 years ago
026ae8f2f0
Call lcd_setFont only when needed
9 years ago
90c97c8185
Add _draw_axis_label function to reduce source
9 years ago
34b17d4a8a
Reduce heater status code if no bed
9 years ago
fc30aa9d88
Aesthetic and functional improvements for graphical LCD
9 years ago
b281001329
Use MSG_X, etc., on Hitachi LCD
9 years ago
f90a8661cb
Uppercase XYZE on Graphical LCD
9 years ago
3613c550fa
Rename README file for fonts
9 years ago
1110814ecf
Update and change Japanese translation
...
Update and change Japanese translation
・Follow-up the PR #3411(Update Readme.fonts about Kana), Remove "who really..." strings. I had forgotten it.
・Add readable translated strings in comment
・Add Japanese translation.
MSG_LCD_ENDSTOPS "エンドストップ"
(utf8 version only. Because non-utf8 version ("ｴﾝﾄﾞｽﾄｯﾌﾟ") over 8 characters)
・Change translation.
MSG_ACC "カソクド mm/s2"
MSG_ACC "\xb6\xbf\xb8\xc4\xde mm/s2" ("ｶｿｸﾄﾞ mm/s2")
9 years ago
a26d70e932
Apply indentation to gcode_M303, PID_autotune
9 years ago
ba66336503
Output error for disabled M303
9 years ago
eda821ca1c
Merge pull request #3556 from philfifi/fix_pullup
...
Fix bug in pullups handling for Z_MIN_PROBE
9 years ago
25b1556a94
Merge pull request #3552 from tnw513/fix_endstops_witbox
...
Endstop settings modified (witbox). Issue #3547
9 years ago
2bc2485313
Update font remarks in Conditionals.h
9 years ago
86c868771b
Fix bug in pullups handling for Z_MIN_PROBE
9 years ago
91de69bb6e
Endstop settings modified. Witbox have max endstops for X and Y.
9 years ago
f2558b1f2c
Additional delta config updates
9 years ago
9a661bdd59
Updated Kossel XL config files for the latest Marlin
9 years ago
09c6323b68
Merge pull request #3543 from thinkyhead/rc_better_bootscreen
...
Better splash screen consolidation
9 years ago
5905ec5ba8
Merge pull request #3541 from thinkyhead/rc_mbl_one_last_lift
...
Add a final lift, if configured, in Manual Bed Leveling
9 years ago
af1711365b
Merge pull request #3538 from jbrazio/bugfix/endtop-hit-redeclared
...
_ENDSTOP_HIT redeclared
9 years ago
ed622ac796
Better splash screen consolidator
9 years ago
90c49f5a14
Fixed invalid addressing (overflow) of position_shift / software endstops
...
Signed-off-by: Jeff K
9 years ago
bcf1e027bb
Fix the redeclaration of _ENDSTOP_HIT
9 years ago
c242bee449
Add a final lift, if configured, in Manual Bed Leveling
9 years ago
b6227932f5
Merge pull request #3530 from thinkyhead/rc_set_rcbugfix_for_now
...
Set version for RCBugFix
9 years ago
19741a0ba6
Merge pull request #3503 from thinkyhead/rc_lcd_endstop_msg
...
Show all endstops on LCD in checkHitEndstops
9 years ago
7aaff371b0
Set version for RCBugFix
9 years ago
db86aaf385
Merge pull request #3528 from thinkyhead/rc_fix_bed_level_equation_oopsie
...
Fix borked set_bed_level_equation_lsq
9 years ago
837df6108c
Fix borked set_bed_level_equation_lsq
9 years ago
7c16e774ca
Show all endstops on LCD in checkHitEndstops
9 years ago
40050db210
Improve code in Sd2Card::readBlock
9 years ago
8429ae6beb
Merge pull request #3525 from thinkyhead/rc_fix_pid_params_per_extruder
...
Fix broken PID_PARAMS_PER_EXTRUDER
9 years ago
339b5b3e34
Patch more configs with new changes
9 years ago
ef2fd620e9
Suggested fixups for LCD/SD config comments
9 years ago
7b5d6ba315
Rebase & feedback
9 years ago
d7cc2c0847
Moved some conditionals to Conditionals.h
9 years ago
36a49eab1c
Improved the LCD and SD comments blocks in Configuration.h
9 years ago
d4a848c72a
Fix broken PID_PARAMS_PER_EXTRUDER
...
As noted by @FalloutBe in #3519
9 years ago
0fc84b75f4
Merge pull request #3522 from esenapaj/patch-1
...
Follow-up and fix for the PR #3453(ELAPSED / PENDING for rollover-safe time checking)
9 years ago
4b75b11a53
Wrap defines in parentheses in configs, M48
9 years ago
832e1c1f2a
Follow-up and fix for the PR #3453(ELAPSED / PENDING for rollover-safe time checking)
...
・Add more "UL" suffix
・Restore removed "UL" suffix
9 years ago
234987ee2f
Fix MBL lift
9 years ago
e0830bf8f1
Don't use LCD alert unless error or alert level is reset later
9 years ago
773229b020
Merge pull request #3515 from thinkyhead/rc_wider_splash
...
On wider screens show a wider splash page, if possible
9 years ago
86467c24be
On wider screens show a wider splash page, if possible
9 years ago
a8e4d7c135
Merge pull request #3477 from alephobjects/BedTempHysteresis
...
Implementation of M190 bed temp hysteresis
9 years ago
5ecd75eeb3
Fix for PR #3502(General cleanup of arc code)
9 years ago
8ec8d59df8
Use #if TEMP_RESIDENCY_TIME > 0 rather than #ifdef TEMP_RESIDENCY_TIME
9 years ago
1cc622b167
Fix minor spelling in comments
9 years ago
866c5be395
Merge pull request #3500 from thinkyhead/rc_shrink_menu_macros
...
Reduce redundancy in MENU_ITEM code
9 years ago
6e52b0b723
Merge pull request #3504 from thinkyhead/rc_fix_debugging
...
Fix debugging of vector_3
9 years ago
88367a37f7
Merge pull request #3227 from thinkyhead/rc_home_offsets_and_limits
...
Relating current_position, min_pos, max_pos, and home_offset
9 years ago
b20bf1826d
Fix debugging of vector_3
9 years ago
4fb8013be1
Reduce redundancy in MENU_ITEM code
9 years ago
b243844690
Merge pull request #3502 from thinkyhead/rc_fix_arcs_bugs
...
General cleanup of arc code
9 years ago
f2abfd6d48
Merge pull request #3501 from thinkyhead/rc_config_comment_cleanup
...
Update some comments in Configuration.h
9 years ago
2129db581e
Simplify MBL movement, zigzag
9 years ago
0493fccc0b
mbl.active is a bool now
9 years ago
b05f448317
Comments on MBL menu items
9 years ago
e08dd0d831
Merge pull request #3498 from thinkyhead/rc_preheat_abs_both_3489
...
Fix bug in lcd_preheat_pla0123 and lcd_preheat_abs0123
9 years ago
9e95f30de0
Merge pull request #3495 from jbrazio/bugfix/followup-3485
...
Throw an error if ENCODER_PULSES_PER_STEP < -1
9 years ago
8e5099fa0c
Update software endstop positions with M206, M428, G92, etc.
9 years ago
5cfb2533d6
Initial cleaning up of arc code
9 years ago
de8c0baf8b
Update some comments in Configuration.h
9 years ago
fda8f96f00
Fix bug in lcd_preheat_pla0123 and lcd_preheat_abs0123
...
Trying to preheat a non-existent extruder causes a crash.
9 years ago
9a3f676709
Throw an error if ENCODER_PULSES_PER_STEP < -1
9 years ago
69c00aea4c
Include bed hysteresis setting in the example configs
9 years ago
9ce4264fda
Merge pull request #3490 from thinkyhead/rc_mbl_adjustments
...
Document some movement functions, rename a local
9 years ago
f8e10ff1d8
Merge pull request #3491 from thinkyhead/rc_mechanical_probe
...
Support for "mechanical probe" with Allen Key as a special case
9 years ago
7eb476597f
Update some comments in Configuration.h
9 years ago
2eb1b102f8
Support for "mechanical probe" with Allen Key as a special case
9 years ago
cfcd3d7b3e
Rename z_offset local to zoffset
9 years ago
5fd20ecac3
Comments on some movement functions
9 years ago
c1b953d38f
Merge pull request #3487 from thinkyhead/rc_redo_esenpaj_3479
...
Apply esenapaj 3479 and delta/scara position bugfix
9 years ago
a781a6f955
Apply esenapaj 3479 and delta/scara position bugfix
9 years ago
2ae7394640
More fine-grained control of LCD redraw
9 years ago
525d8256d4
Merge pull request #3481 from thinkyhead/rc_extruder_offset_array
...
Fix: gcode_T using non-existent Z offset
9 years ago
b9301e6c62
Merge pull request #3482 from thinkyhead/rc_fix_HAS_Z_MIN_PROBE
...
Patch conditions for HAS_Z_MIN_PROBE
9 years ago
dc0a3e37be
Patch conditions for HAS_Z_MIN_PROBE
9 years ago
46881c846c
Add comments for extruder offset options
9 years ago
edf376ce0d
Fix: gcode_T using non-existent Z offset
...
As noted by @snowzach in #3461
9 years ago
178aeb79c8
Implementation of M190 bed temp hysteresis
9 years ago
0439483bc8
Merge pull request #3476 from thinkyhead/rc_debug_leveling_gcode_t
...
Add DEBUG_LEVELING output for gcode_T
9 years ago
c03e5f5efd
Merge pull request #3475 from thinkyhead/rc_language_cleanup
...
General cleanup of language files
9 years ago
910d3648bb
Merge pull request #3474 from thinkyhead/rc_russian_apr2016
...
Additional Russian translations
9 years ago
63d8893f5d
Add DEBUG_LEVELING output for gcode_T
9 years ago
081cfc5cf3
Merge pull request #3472 from thinkyhead/fix_issue_3375
...
Initialize stepper counts for Delta/SCARA
9 years ago
fe0fe184aa
Replace some tabs with spaces
9 years ago
e773d081c0
General language file cleanup
9 years ago
b63c79b5ff
Merge pull request #3473 from thinkyhead/rc_one_more_elapse
...
Fix a messed up ELAPSED instance
9 years ago
068bc980ce
Additional Russian translations
...
Thanks to @gans-AD – #3363
9 years ago
f840c7de4d
Initialize stepper counts for Delta/SCARA
9 years ago
c5a8755cc0
Fix a messed up ELAPSED instance
9 years ago
81918657f4
Fix Deutsch string errors, redundancies
9 years ago
56acaf3594
Merge pull request #3469 from thinkyhead/rc_aleph_cooldownfix
...
Fix for M109 and M190 cooldown
9 years ago
c218db136a
Fix for M109 and M190 cooldown
...
Also removes the re-definition of now inside M190's while loop
9 years ago
e2a197ab71
Merge pull request #3467 from AnHardt/Fix-Servo-without-endstop-probe
...
Fix-Servo-without-endstop/probe
9 years ago
3a1ac14bbc
Merge pull request #3437 from thinkyhead/rc_lcd_encoder_movement
...
More bits when encoderPosition is cast as signed
9 years ago
c5a2ce4366
Merge pull request #3446 from thinkyhead/rc_fixup_M206_and_mesh
...
Fix home_offset handling and account for it in G29
9 years ago
b1bb1c7989
Merge pull request #3466 from thinkyhead/rc_look_for_leveling_bug
...
Add CORE support to st_set_position and plan_set_position
9 years ago
9cc571b312
Fix-Servo-without-endstop-probe
...
Sorry for not having realized someone (me) redefined not existing servo pinns to -1, some lines above.
This is a simple error - not a feature.
9 years ago
3e5312f116
CORE support for st_set_position & plan_set_position
9 years ago
e087a99a10
Some cleanup of st_get_pos functions
9 years ago
ca6c6ec4ca
Versions of Arduino IDE prior to 1.6.0 are no longer supported
9 years ago
fdee2be49c
More logging of matrix behavior
9 years ago
7f265db3ef
Move sync_plan_position after DEBUG_LEVELING
9 years ago
02550af7c3
Merge pull request #3453 from thinkyhead/rc_jbrazio_m190
...
ELAPSED / PENDING for rollover-safe time checking
9 years ago
7c770f039c
Merge pull request #3456 from thinkyhead/rc_MSG_ERR_REDUNDANT_TEMP
...
Remove redundant text from MSG_ERR_REDUNDANT_TEMP
9 years ago
925cc305ce
Merge pull request #3455 from michos-conradt/RCBugFix
...
Add missing translations for German
9 years ago
011f4736f1
Remove redundant text from MSG_ERR_REDUNDANT_TEMP
9 years ago
906c1c066f
Merge pull request #3423 from jbrazio/translate/pt_BR
...
Added missing pt_BR translation
9 years ago
803845ec18
Add a case for M113 to process_next_command
9 years ago
f3a7a5c99b
Merge branch 'RCBugFix' into translations
9 years ago
8b923039e2
Add missing german translations.
9 years ago
386140f361
Test time difference in safe way
9 years ago
1b7356b3a1
Account for home_offset in G29 handler
9 years ago
f3562dd895
Have M206 alter current_position, M428 use new function
9 years ago
562e281c73
Merge pull request #3443 from thinkyhead/rc_host_timeout_tweak
...
Adjust timeout code in host_keepalive
9 years ago
6d465321b5
Adjust timeout code in host_keepalive
9 years ago
8198cc30b5
More bits when encoderPosition is cast as signed
9 years ago
95acba2cfa
Wrong Pin Assignment Megatronics 3
...
SERVO2 is doubled defined and causes compiler errors
9 years ago
50c3140040
Merge pull request #3414 from thinkyhead/rc_host_timeout_mods
...
Host Keepalive configurable timeout with 2s default
9 years ago
6bd20371f0
Merge pull request #3438 from thinkyhead/rc_M109_residency_loop_fix
...
Fix bug which can cause an infinite M109 loop
9 years ago
96e37bb70a
Merge pull request #3419 from DavidBjerreBjoerklund/patch-2
...
Update language_da.h
9 years ago
13d758c651
Merge pull request #3420 from DavidBjerreBjoerklund/patch-3
...
Update language_da.h
9 years ago
518068a5a8
Merge pull request #3425 from tnw513/FixLangIt
...
Optimized Italian strings to fit in 16 character display
9 years ago
1b81e5adc7
Merge pull request #3431 from AnHardt/lang-de
...
de-language additions
9 years ago
1acf901b63
Adjustments to residency_start_ms handling
9 years ago
907aed57db
Fix bug which can cause an infinite M109 loop
...
Since residency_start_ms is -1 when entering the heatup while loop whilst the hotend temp is close to the target them already then it may not escape.
Hence "Start the TEMP_RESIDENCY_TIME timer when we reach target temp for the first time."
9 years ago
dd3a06a95a
Implemented M155 and M156, a generic TWI/I2C interface for Marlin
9 years ago
843aa90b5a
Merge pull request #3434 from thinkyhead/rc_more_debug_leveling
...
Additional debug leveling output
9 years ago
a644ab1de4
Minor patch ups to `G29`
...
This may fix a subtle bug caused by doing `G29` more than once without
`G28` between.
9 years ago
cba2698871
Additional DEBUG_LEVELING output
9 years ago
c3d1b7db2d
de-language additions
9 years ago
4e17187c96
Merge pull request #3426 from thinkyhead/rc_no_unhomed_lcd_move_on_delta_scara
...
No LCD Move for unhomed Delta/SCARA
9 years ago
5e18d650c4
Merge pull request #3427 from thinkyhead/rc_better_SERIAL_ECHOPAIR
...
No casting needed for SERIAL_ECHOPAIR
9 years ago
e0b0d1eb6b
Add M113 to get/set Host Keepalive
9 years ago
85883da90c
Implement basic HOST_KEEPALIVE_INTERVAL
9 years ago
2eca8d63b3
Add DEFAULT_KEEPALIVE_INTERVAL setting
9 years ago
098fb8f8c9
Merge pull request #3413 from thinkyhead/rc_probe_G30_position
...
Report the probe position in G30
9 years ago
3460d01441
Merge pull request #3422 from jbrazio/translate/pt_PT
...
Update pt_PT translation
9 years ago
c9c7c66b95
Merge pull request #3421 from jbrazio/bugfix/m109-EXTRUDE_MINTEMP-expansion
...
M109: Protect against EXTRUDE_MINTEMP expansion
9 years ago
d7cbb2eec9
Merge pull request #3403 from jbrazio/feature/stopwatch
...
Print job timer rework
9 years ago
f834bcd43a
Merge pull request #3415 from thinkyhead/rc_filwidth_issue
...
Fix FILAMENT_WIDTH_SENSOR measurement
9 years ago
5fc6daba2b
Disallow REPRAPWORLD_KEYPAD moves on Delta/SCARA until homed
9 years ago
7bb15a1c57
Consolidate REPRAPWORLD_KEYPAD definitions
9 years ago
dc19b69697
No casting needed for SERIAL_ECHOPAIR
9 years ago
165e73794a
Tweak encoderPosition non-zero test
9 years ago
479d307a44
Disable LCD Move XYZ for unhomed Delta/SCARA
9 years ago
9088802da1
Optimized Italian strings to fit in 16 character display
9 years ago
801cd48a72
Added missing pt_BR translation
9 years ago
013f19054b
Update pt_PT translation
9 years ago
471d30cc1c
M109: Protected against EXTRUDE_MINTEMP expansion
9 years ago
5f840d2e30
Update language_da.h
...
Corrected:
MSG_KILLED
MSG_NO_MOVE
MSG_STOPPED
MSG_PRINT_ABORTED
MSG_ON
MSG_OFF
9 years ago
7c7e30f4cc
Adherence to the new OOP coding standards
9 years ago
b80b40a578
Update language_da.h
...
Added translation mentioned in issue #3351 :
Homing would be best tranlated homing, or "Kører til udgangsposition".
#define MSG_SET_HOME_OFFSETS
#define MSG_LEVEL_BED_HOMING
#define MSG_LEVEL_BED_WAITING
#define MSG_LEVEL_BED_DONE
#define MSG_LEVEL_BED_CANCEL
#define MSG_HOME_OFFSETS_APPLIED
9 years ago
573d772c92
Merge pull request #3416 from paulusjacobus/RCBugFix
...
Optimised Ducth messages to fit in 16 Char display Update language_nl.h
9 years ago
3f7ae9a7ce
Update language_nl.h
...
Optimised all added messages to fit within 16 Characters
9 years ago
865dcf3fb4
Fix FILAMENT_WIDTH_SENSOR measurement
...
Only measure and store filament width when E is going forward.
9 years ago
2f6c5fe2da
Report the probe position in G30
9 years ago
74effedbf5
Merge pull request #3412 from paulusjacobus/RCBugFix
...
rebased my fork with RCBugFix release in order to push language_nl.h
9 years ago
bba1f16589
Merge pull request #3411 from esenapaj/patch-1
...
Update Readme.fonts about Kana
9 years ago
48a4410f02
rebased my fork with RCBugFix release in order to push language_nl.h
9 years ago
ff9511b870
Update Readme.fonts about Kana
...
I think that that sentence has been completed its part.
Because Kana fonts were revised by me the other day(PR #3289 ), who am a native Japanese.
And for @AnHardt,
I'd like to take this opportunity to express one's heartfelt gratitude as a far eastern person,
about you has been maintaining the resource of Japanese despite you are a far western person.
9 years ago
e215c7100d
fixed mistranslations and minor changes for consistency between "it" and "en" files.
9 years ago
6208db3b00
fixed mistranslations and minor changes for consistency between "it" and "en" files.
9 years ago
e48d0263bf
Bugfix: M32 was still using the old print timer
9 years ago
e8b80d8c20
Implemented M75, M76, M77 to control the print timer
9 years ago
eb61051556
Rework the print job timer to use the stopwatch class
9 years ago
399101fff3
Implemented the stopwatch class and methods
9 years ago
98f2e9fc83
Reduce string storage required for DEBUG_LEVELING
9 years ago
1af5d7b35f
Add more leveling-debug output
9 years ago
d5b19a49f6
Merge pull request #3384 from thinkyhead/rc_adjust_M111_output
...
Final tweaks to M111 output
9 years ago
da2ff4a6d3
Catch a TEMP_SENSOR error before a pins issue
9 years ago
90f6f02aca
Merge pull request #3397 from thinkyhead/rc_menu_issues_fixer
...
Revert #3388 , clean up lcd_move code
9 years ago
fb38d698db
Add feedback after "Click to Begin"
9 years ago
d5f0db26dc
Merge pull request #3390 from jbrazio/docs/update-source-url
...
Update DEFAULT_SOURCE_URL comment
9 years ago
ce58d1d4d5
Merge pull request #3392 from barus93/patch-2
...
Update language_it.h
9 years ago
582b58e660
Add audio feedback to edit items
9 years ago
a70c3ffc21
Minor syntax tweak with encoderPosition
9 years ago
0f247187b8
Drop extra setting of currentMenu
9 years ago
24cde86a4f
Fix syntax highlighting of menu_edit_type lines
9 years ago
86372cd394
Add underscore to internal lcd move function names
9 years ago
aa97328cd3
Use min_pos/max_pos for _lcd_move
9 years ago
f936df9507
Small cleanup of feedrate dead-zone
9 years ago
f5c2fb27cd
Handle defer_return_to_status in lcd_goto_menu
9 years ago
8459f7fa5c
Use `ms` where possible.
9 years ago
34ce9c4c1c
Restore save previous for menu edit items
9 years ago
03d5c9a482
Merge remote-tracking branch 'upstream/RCBugFix' into RCBugFix
9 years ago
Scott Lahteine