microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

Consistent order/formatting of pins files

Browse Source
2.0.x
Scott Lahteine 8 years ago
parent 11e9530111
commit e78274a7f4
30 changed files with 1614 additions and 1091 deletions
Show Stats Download Patch File Download Diff File

45
Marlin/pins_3DRAG.h
Unescape Escape View File

@ -42,20 +42,35 @@
#include "pins_RAMPS.h"
#define HEATER_2_PIN 6
//
// Limit Switches
//
#undef Z_MAX_PIN
#define Z_MAX_PIN -1
//
// Steppers
//
#undef Z_ENABLE_PIN
#define Z_ENABLE_PIN 63
#undef Z_MAX_PIN
#define Z_MAX_PIN -1
//
// SD Card
//
#undef SDSS
#define SDSS 25//53
//
// Heaters / Fans
//
#define HEATER_2_PIN 6
//
// LCD / Controller
//
#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
#undef BEEPER_PIN
#define BEEPER_PIN -1
#define BEEPER_PIN -1
#undef LCD_PINS_RS
#undef LCD_PINS_ENABLE
@ -63,23 +78,23 @@
#undef LCD_PINS_D5
#undef LCD_PINS_D6
#undef LCD_PINS_D7
#define LCD_PINS_RS 27
#define LCD_PINS_ENABLE 29
#define LCD_PINS_D4 37
#define LCD_PINS_D5 35
#define LCD_PINS_D6 33
#define LCD_PINS_D7 31
#define LCD_PINS_RS 27
#define LCD_PINS_ENABLE 29
#define LCD_PINS_D4 37
#define LCD_PINS_D5 35
#define LCD_PINS_D6 33
#define LCD_PINS_D7 31
// Buttons
#undef BTN_EN1
#undef BTN_EN2
#undef BTN_ENC
#define BTN_EN1 16
#define BTN_EN2 17
#define BTN_ENC 23
#define BTN_EN1 16
#define BTN_EN2 17
#define BTN_ENC 23
#else
#define BEEPER_PIN 33
#define BEEPER_PIN 33
#endif // ULTRA_LCD && NEWPANEL

58
Marlin/pins_5DPRINT.h
Unescape Escape View File

@ -35,45 +35,59 @@
#define LARGE_FLASH true
//
// Limit Switches
//
#define X_STOP_PIN 37
#define Y_STOP_PIN 36
#define Z_STOP_PIN 39
//
// Steppers
//
#define X_STEP_PIN 0
#define X_DIR_PIN 1
#define X_ENABLE_PIN 23
#define X_STOP_PIN 37
#define Y_STEP_PIN 2
#define Y_DIR_PIN 3
#define Y_ENABLE_PIN 19
#define Y_STOP_PIN 36
#define Z_STEP_PIN 4
#define Z_DIR_PIN 5
#define Z_ENABLE_PIN 18
#define Z_STOP_PIN 39
#define E0_STEP_PIN 6
#define E0_DIR_PIN 7
#define E0_ENABLE_PIN 17
#define HEATER_0_PIN 21 // Extruder
#define HEATER_BED_PIN 20 // Bed
// Microstepping pins - Mapping not from fastio.h (?)
#define X_MS1_PIN 25
#define X_MS2_PIN 26
#define Y_MS1_PIN 9
#define Y_MS2_PIN 8
#define Z_MS1_PIN 7
#define Z_MS2_PIN 6
#define E0_MS1_PIN 5
#define E0_MS2_PIN 4
//
// Temperature Sensors
//
#define TEMP_0_PIN 1 // Analog
#define TEMP_BED_PIN 0 // Analog
//
// Heaters / Fans
//
#define HEATER_0_PIN 21
#define HEATER_BED_PIN 20
// You may need to change FAN_PIN to 16 because Marlin isn't using fastio.h
// for the fan and Teensyduino uses a different pin mapping.
#define FAN_PIN 16 // Fan
#define TEMP_0_PIN 1 // Extruder / Analog pin numbering
#define TEMP_BED_PIN 0 // Bed / Analog pin numbering
#define FAN_PIN 16
// The SDSS pin uses a different pin mapping from file fastio.h
//
// SD Card
//
#define SDSS 20
// Microstepping pins
// Note that the pin mapping is not from fastio.h
// See Sd2PinMap.h for the pin configurations ???
#define X_MS1_PIN 25
#define X_MS2_PIN 26
#define Y_MS1_PIN 9
#define Y_MS2_PIN 8
#define Z_MS1_PIN 7
#define Z_MS2_PIN 6
#define E0_MS1_PIN 5
#define E0_MS2_PIN 4

43
Marlin/pins_99.h
Unescape Escape View File

@ -23,31 +23,46 @@
/**
* Board 99 pin assignments
*/
#define BOARD_NAME "99 Unknown"
//
// Limit Switches
//
#define X_STOP_PIN 16
#define Y_STOP_PIN 67
#define Z_STOP_PIN 59
//
// Steppers
//
#define X_STEP_PIN 2
#define X_DIR_PIN 3
#define X_ENABLE_PIN -1
#define X_STOP_PIN 16
#define X_ENABLE_PIN -1
#define Y_STEP_PIN 5
#define Y_DIR_PIN 6
#define Y_ENABLE_PIN -1
#define Y_STOP_PIN 67
#define Z_STEP_PIN 62
#define Z_DIR_PIN 63
#define Z_STEP_PIN 62
#define Z_DIR_PIN 63
#define Z_ENABLE_PIN -1
#define Z_STOP_PIN 59
#define E0_STEP_PIN 65
#define E0_DIR_PIN 66
#define E0_STEP_PIN 65
#define E0_DIR_PIN 66
#define E0_ENABLE_PIN -1
#define SDSS 53
#define PS_ON_PIN 9
//
// Temperature Sensors
//
#define TEMP_0_PIN 6 // ANALOG INPUT - NOT DIGITAL OUTPUT
#define TEMP_BED_PIN 10
#define HEATER_0_PIN 13
#define TEMP_0_PIN 6 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
//
// Heaters / Fans
//
#define HEATER_0_PIN 13
#define HEATER_BED_PIN 4
#define TEMP_BED_PIN 10
#define SDSS 53
#define PS_ON_PIN 9

155
Marlin/pins_A4JP.h
Unescape Escape View File

@ -30,39 +30,15 @@
#define BOARD_NAME "AJ4P"
// Servo support
//
// Servos
//
#define SERVO0_PIN 22 // Motor header MX1
#define SERVO1_PIN 23 // Motor header MX2
#define SERVO2_PIN 24 // Motor header MX3
#define SERVO3_PIN 5 // PWM header pin 5
#if ENABLED(Z_PROBE_SLED)
#define SLED_PIN -1
#endif
//Fan_2 2
/*****************
#if ENABLED(ULTRA_LCD)
#define KILL_PIN -1 //was 80 Glen maybe a mistake
#endif // ULTRA_LCD */
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
#define BEEPER_PIN 44
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 70
#define DOGLCD_CS 71
#define LCD_SCREEN_ROT_180
#define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board
#if ENABLED(TEMP_STAT_LEDS)
#define STAT_LED_RED 22
#define STAT_LED_BLUE 32
#endif
#endif // VIKI2/miniVIKI
#define SLED_PIN -1
#define FILWIDTH_PIN 3 // ANALOG NUMBERING
@ -71,57 +47,81 @@
************************************************/
#define LARGE_FLASH true
#define X_STEP_PIN 37
#define X_DIR_PIN 48
#define X_MIN_PIN 12
#define X_MAX_PIN 24
#define X_ENABLE_PIN 29
#define X_MS1_PIN 40
#define X_MS2_PIN 41
#define Y_STEP_PIN 36
#define Y_DIR_PIN 49
#define Y_MIN_PIN 11
#define Y_MAX_PIN 23
#define Y_ENABLE_PIN 28
#define Y_MS1_PIN 69
#define Y_MS2_PIN 39
#define Z_STEP_PIN 35
#define Z_DIR_PIN 47
#define Z_MIN_PIN 10
#define Z_MAX_PIN 30
#define Z_ENABLE_PIN 27
#define Z_MS1_PIN 68
#define Z_MS2_PIN 67
#define HEATER_BED_PIN 3
#define TEMP_BED_PIN 7 //2014/02/04 0:T0 / 1:T1 / 2:T2 / 7:T3
//
// Limit Switches
//
#define X_MIN_PIN 12
#define X_MAX_PIN 24
#define Y_MIN_PIN 11
#define Y_MAX_PIN 23
#define Z_MIN_PIN 10
#define Z_MAX_PIN 30
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 30
#endif
//
// Steppers
//
#define X_STEP_PIN 37
#define X_DIR_PIN 48
#define X_ENABLE_PIN 29
#define X_MS1_PIN 40
#define X_MS2_PIN 41
#define Y_STEP_PIN 36
#define Y_DIR_PIN 49
#define Y_ENABLE_PIN 28
#define Y_MS1_PIN 69
#define Y_MS2_PIN 39
#define Z_STEP_PIN 35
#define Z_DIR_PIN 47
#define Z_ENABLE_PIN 27
#define Z_MS1_PIN 68
#define Z_MS2_PIN 67
#define E0_STEP_PIN 34
#define E0_DIR_PIN 43
#define E0_ENABLE_PIN 26
#define E0_MS1_PIN 65
#define E0_MS2_PIN 66
#define E1_STEP_PIN 33
#define E1_DIR_PIN 42
#define E1_ENABLE_PIN 25
#define E1_MS1_PIN 63
#define E1_MS2_PIN 64
#define DIGIPOTSS_PIN 38
#define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping
//
// Heaters / Fans
//
#define HEATER_0_PIN 9
#define TEMP_0_PIN 0
#define HEATER_1_PIN 7
#define HEATER_BED_PIN 3
#define E0_STEP_PIN 34
#define E0_DIR_PIN 43
#define E0_ENABLE_PIN 26
#define E0_MS1_PIN 65
#define E0_MS2_PIN 66
#define E1_STEP_PIN 33
#define E1_DIR_PIN 42
#define E1_ENABLE_PIN 25
#define E1_MS1_PIN 63
#define E1_MS2_PIN 64
#define DIGIPOTSS_PIN 38
#define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping
#define FAN_PIN 8
#define FAN0_PIN 6
#define FAN1_PIN 2
#define TEMP_0_PIN 0
#define TEMP_BED_PIN 7
#define SDSS 53
#define LED_PIN 13
#define FAN_PIN 8
#define PS_ON_PIN 4
#define FAN_0_PIN 6 //Glen
#define FAN_1_PIN 2 //Glen
// 2015/12/23
//
// LCD / Controller
//
#define LCD_PINS_RS 70 //ext2_5
#define LCD_PINS_ENABLE 71 //ext2_7
#define LCD_PINS_D4 72 ///////Ext2 9 ?
@ -139,3 +139,18 @@
#define BTN_DOWN 85 //ext2_6
#define HOME_PIN BTN_HOME
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
#define BEEPER_PIN 44
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 70
#define DOGLCD_CS 71
#define LCD_SCREEN_ROT_180
#define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board
#if ENABLED(TEMP_STAT_LEDS)
#define STAT_LED_RED 22
#define STAT_LED_BLUE 32
#endif
#endif // VIKI2/miniVIKI

78
Marlin/pins_AZTEEG_X3_PRO.h
Unescape Escape View File

@ -28,21 +28,16 @@
#include "pins_RAMPS.h"
#undef FAN_PIN
#define FAN_PIN 6 //Part Cooling System
//
// Tested this pin with bed leveling on a Delta with 1 servo.
// Physical wire attachment on EXT1: GND, 5V, D47.
//
#undef SERVO0_PIN
#define SERVO0_PIN 47
#undef BEEPER_PIN
#define BEEPER_PIN 33
#define CONTROLLERFAN_PIN 4 //Pin used for the fan to cool motherboard (-1 to disable)
//Fans/Water Pump to cool the hotend cool side.
#define EXTRUDER_0_AUTO_FAN_PIN 5
#define EXTRUDER_1_AUTO_FAN_PIN 5
#define EXTRUDER_2_AUTO_FAN_PIN 5
#define EXTRUDER_3_AUTO_FAN_PIN 5
//
//This section is to swap the MIN and MAX pins because the X3 Pro comes with only
//MIN endstops soldered onto the board. Delta code wants the homing endstops to be
//the MAX so I swapped them here.
// Swap the MIN and MAX endstop pins because the X3 Pro comes with only
// MIN endstop pin headers soldered onto the board.
//
#if ENABLED(DELTA)
#undef X_MIN_PIN
@ -60,10 +55,16 @@
#define Z_MAX_PIN 18
#endif
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 19
#define Z_MIN_PROBE_PIN 18
#endif
//
// Steppers
//
#define E2_STEP_PIN 23
#define E2_DIR_PIN 25
#define E2_ENABLE_PIN 40
@ -76,10 +77,18 @@
#define E4_DIR_PIN 37
#define E4_ENABLE_PIN 42
#undef HEATER_1_PIN
#undef HEATER_2_PIN
#undef HEATER_3_PIN
#define HEATER_1_PIN 9
//
// Temperature Sensors
//
#define TEMP_2_PIN 12 // ANALOG NUMBERING
#define TEMP_3_PIN 11 // ANALOG NUMBERING
#define TEMP_4_PIN 10 // ANALOG NUMBERING
#define TC1 4 // ANALOG NUMBERING Thermo couple on Azteeg X3Pro
#define TC2 5 // ANALOG NUMBERING Thermo couple on Azteeg X3Pro
//
// Heaters / Fans
//
#define HEATER_2_PIN 16
#define HEATER_3_PIN 17
#define HEATER_4_PIN 4
@ -87,26 +96,27 @@
#define HEATER_6_PIN 6
#define HEATER_7_PIN 11
#undef TEMP_2_PIN
#undef TEMP_3_PIN
#define TEMP_2_PIN 12 // ANALOG NUMBERING
#define TEMP_3_PIN 11 // ANALOG NUMBERING
#define TEMP_4_PIN 10 // ANALOG NUMBERING
#define TC1 4 // ANALOG NUMBERING Thermo couple on Azteeg X3Pro
#define TC2 5 // ANALOG NUMBERING Thermo couple on Azteeg X3Pro
#undef FAN_PIN
#define FAN_PIN 6 //Part Cooling System
#define CONTROLLERFAN_PIN 4 //Pin used for the fan to cool motherboard (-1 to disable)
// Fans/Water Pump to cool the hotend cool side.
#define EXTRUDER_0_AUTO_FAN_PIN 5
#define EXTRUDER_1_AUTO_FAN_PIN 5
#define EXTRUDER_2_AUTO_FAN_PIN 5
#define EXTRUDER_3_AUTO_FAN_PIN 5
//
// These Servo pins are for when they are defined. Tested for usage with bed leveling
// on a Delta with 1 servo. Running through the Z servo endstop in code.
// Physical wire attachment was done on EXT1 on the GND, 5V, and D47 pins.
// LCD / Controller
//
#undef SERVO0_PIN
#define SERVO0_PIN 47
#undef BEEPER_PIN
#define BEEPER_PIN 33
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
#undef SD_DETECT_PIN
#define SD_DETECT_PIN 49 // For easy adapter board
#elif ENABLED(TEMP_STAT_LEDS)
#define STAT_LED_RED 32
#define STAT_LED_BLUE 35
#define SD_DETECT_PIN 49 // For easy adapter board
#else
#define STAT_LED_RED 32
#define STAT_LED_BLUE 35
#endif

25
Marlin/pins_BRAINWAVE.h
Unescape Escape View File

@ -33,22 +33,29 @@
#define BOARD_NAME "Brainwave"
//
// Limit Switches
//
#define X_STOP_PIN 7
#define Y_STOP_PIN 6
#define Z_STOP_PIN 5
//
// Steppers
//
#define X_STEP_PIN 27
#define X_DIR_PIN 29
#define X_ENABLE_PIN 28
#define X_STOP_PIN 7
#define X_ATT_PIN 26
#define Y_STEP_PIN 31
#define Y_DIR_PIN 33
#define Y_ENABLE_PIN 32
#define Y_STOP_PIN 6
#define Y_ATT_PIN 30
#define Z_STEP_PIN 17
#define Z_DIR_PIN 19
#define Z_ENABLE_PIN 18
#define Z_STOP_PIN 5
#define Z_ATT_PIN 16
#define E0_STEP_PIN 21
@ -56,11 +63,17 @@
#define E0_ENABLE_PIN 22
#define E0_ATT_PIN 20
//
// Temperature Sensors
//
#define TEMP_0_PIN 7 // Extruder / Analog pin numbering
#define TEMP_BED_PIN 6 // Bed / Analog pin numbering
//
// Heaters / Fans
//
#define HEATER_0_PIN 4 // Extruder
#define HEATER_BED_PIN 38 // Bed
#define FAN_PIN 3 // Fan
#define TEMP_0_PIN 7 // Extruder / Analog pin numbering
#define TEMP_BED_PIN 6 // Bed / Analog pin numbering
#define LED_PIN 39

30
Marlin/pins_BRAINWAVE_PRO.h
Unescape Escape View File

@ -41,13 +41,23 @@
#define LARGE_FLASH true
//
// Limit Switches
//
#define X_STOP_PIN 47
#define Y_STOP_PIN 18
#define Z_MAX_PIN 36
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 17
#endif
//
// Steppers
//
#define X_STEP_PIN 33
#define X_DIR_PIN 32
#define X_ENABLE_PIN 11
@ -64,14 +74,24 @@
#define E0_DIR_PIN 34
#define E0_ENABLE_PIN 13
#define HEATER_0_PIN 15
#define HEATER_BED_PIN 14 // Bed
#define FAN_PIN 16 // Fan, PWM
//
// Temperature Sensors
//
#define TEMP_0_PIN 2 // Extruder / Analog pin numbering
#define TEMP_1_PIN 1 // Spare / Analog pin numbering
#define TEMP_BED_PIN 0 // Bed / Analog pin numbering
//
// Heaters / Fans
//
#define HEATER_0_PIN 15
#define HEATER_BED_PIN 14 // Bed
#define FAN_PIN 16 // Fan, PWM
//
// LCD / Controller
//
#define SDSS 20
#define LED_PIN 19
#define SD_DETECT_PIN 12
#define LED_PIN 19

88
Marlin/pins_CHEAPTRONIC.h
Unescape Escape View File

@ -31,57 +31,59 @@
#define BOARD_NAME "Cheaptronic v1.0"
#define LARGE_FLASH true
// X motor stepper
#define X_STEP_PIN 14
#define X_DIR_PIN 15
#define X_ENABLE_PIN 24
//
// Limit Switches
//
#define X_STOP_PIN 3
#define Y_STOP_PIN 2
#define Z_STOP_PIN 5
// Y motor stepper
#define Y_STEP_PIN 35
#define Y_DIR_PIN 36
#define Y_ENABLE_PIN 31
//
// Steppers
//
#define X_STEP_PIN 14
#define X_DIR_PIN 15
#define X_ENABLE_PIN 24
// Z motor stepper
#define Z_STEP_PIN 40
#define Z_DIR_PIN 41
#define Z_ENABLE_PIN 37
#define Y_STEP_PIN 35
#define Y_DIR_PIN 36
#define Y_ENABLE_PIN 31
// XYZ endstops
#define X_STOP_PIN 3
#define Y_STOP_PIN 2
#define Z_STOP_PIN 5
#define Z_STEP_PIN 40
#define Z_DIR_PIN 41
#define Z_ENABLE_PIN 37
// Extruder 0 stepper
#define E0_STEP_PIN 26
#define E0_DIR_PIN 28
#define E0_ENABLE_PIN 25
#define E0_STEP_PIN 26
#define E0_DIR_PIN 28
#define E0_ENABLE_PIN 25
// Extruder 1 stepper
#define E1_STEP_PIN 33
#define E1_DIR_PIN 34
#define E1_ENABLE_PIN 30
#define HEATER_0_PIN 19 // EXTRUDER 1
#define HEATER_1_PIN 23 // EXTRUDER 2
#define HEATER_BED_PIN 22
#define E1_STEP_PIN 33
#define E1_DIR_PIN 34
#define E1_ENABLE_PIN 30
//
// Temperature sensors
#define TEMP_0_PIN 15
#define TEMP_1_PIN 14
#define TEMP_BED_PIN 13
//
#define TEMP_0_PIN 15
#define TEMP_1_PIN 14
#define TEMP_BED_PIN 13
//
// Heaters / Fans
//
#define HEATER_0_PIN 19 // EXTRUDER 1
#define HEATER_1_PIN 23 // EXTRUDER 2
#define HEATER_BED_PIN 22
// Cheaptronic v1.0 doesn't support LCD
#define LCD_PINS_RS -1
#define LCD_PINS_ENABLE -1
#define LCD_PINS_D4 -1
#define LCD_PINS_D5 -1
#define LCD_PINS_D6 -1
#define LCD_PINS_D7 -1
#define LCD_PINS_RS -1
#define LCD_PINS_ENABLE -1
#define LCD_PINS_D4 -1
#define LCD_PINS_D5 -1
#define LCD_PINS_D6 -1
#define LCD_PINS_D7 -1
// Cheaptronic v1.0 doesn't support keypad
#define BTN_EN1 -1
#define BTN_EN2 -1
#define BTN_ENC -1
// Cheaptronic v1.0 doesn't use this
#define BTN_EN1 -1
#define BTN_EN2 -1
#define BTN_ENC -1

152
Marlin/pins_CNCONTROLS_11.h
Unescape Escape View File

@ -6,54 +6,65 @@
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
#endif
#define BOARD_NAME "CN Controls V11"
#define BOARD_NAME "CN Controls V11"
//#define LARGE_FLASH true
#define X_ENABLE_PIN 35
#define X_STEP_PIN 34
#define X_DIR_PIN 36
#define X_MIN_PIN 43
#define X_MAX_PIN -1
#define Y_ENABLE_PIN 38
#define Y_STEP_PIN 37
#define Y_DIR_PIN 39
#define Y_MIN_PIN 45
#define Y_MAX_PIN -1
#define Z_ENABLE_PIN 41
#define Z_STEP_PIN 40
#define Z_DIR_PIN 48
#define Z_MIN_PIN 42
#define Z_MAX_PIN -1
#define E0_ENABLE_PIN 3
#define E0_STEP_PIN 29
#define E0_DIR_PIN 28
#define HEATER_0_PIN 5
#define TEMP_0_PIN 0 // ANALOG INPUT !!
#define E1_ENABLE_PIN 60
#define E1_STEP_PIN 61
#define E1_DIR_PIN 62
#define HEATER_1_PIN 58
#define TEMP_1_PIN 3 // 3 for tool2 -> 2 for chambertemp
#define E2_ENABLE_PIN 16
#define E2_STEP_PIN 15
#define E2_DIR_PIN 14
#define HEATER_2_PIN 64
#define TEMP_2_PIN 2 // 9 for tool3 -> 2 for chambertemp
#define E3_ENABLE_PIN 47
#define E3_STEP_PIN 44
#define E3_DIR_PIN 49
#define HEATER_3_PIN 46
#define TEMP_3_PIN 11 // 11 for tool4 -> 2 for chambertemp
#define HEATER_BED_PIN 2
#define TEMP_BED_PIN 1 // ANALOG INPUT !!
//
// Limit Switches
//
#define X_STOP_PIN 43
#define Y_STOP_PIN 45
#define Z_STOP_PIN 42
//
// Steppers
//
#define X_STEP_PIN 34
#define X_DIR_PIN 36
#define X_ENABLE_PIN 35
#define Y_STEP_PIN 37
#define Y_DIR_PIN 39
#define Y_ENABLE_PIN 38
#define Z_STEP_PIN 40
#define Z_DIR_PIN 48
#define Z_ENABLE_PIN 41
#define E0_STEP_PIN 29
#define E0_DIR_PIN 28
#define E0_ENABLE_PIN 3
#define E1_STEP_PIN 61
#define E1_DIR_PIN 62
#define E1_ENABLE_PIN 60
#define E2_STEP_PIN 15
#define E2_DIR_PIN 14
#define E2_ENABLE_PIN 16
#define E3_STEP_PIN 44
#define E3_DIR_PIN 49
#define E3_ENABLE_PIN 47
//
// Temperature Sensors
//
#define TEMP_0_PIN 0 // ANALOG INPUT !!
#define TEMP_1_PIN 3 // 3 for tool2 -> 2 for chambertemp
#define TEMP_2_PIN 2 // 9 for tool3 -> 2 for chambertemp
#define TEMP_3_PIN 11 // 11 for tool4 -> 2 for chambertemp
#define TEMP_BED_PIN 1 // ANALOG INPUT !!
//
// Heaters / Fans
//
#define HEATER_0_PIN 5
#define HEATER_1_PIN 58
#define HEATER_2_PIN 64
#define HEATER_3_PIN 46
#define HEATER_BED_PIN 2
// Tools
@ -72,30 +83,37 @@
//#define SPARE_IO 12
//#define FAN_PIN 7 // common PWM pin for all tools
// User interface
#define BEEPER_PIN 6
//
// SD Card
//
#define SDSS 53
#define SD_DETECT_PIN 13
//
// LCD / Controller
//
#define BEEPER_PIN 6
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 26
#define DOGLCD_CS 24
#define DOGLCD_MOSI -1
#define DOGLCD_SCK -1
#define DOGLCD_A0 26
#define DOGLCD_CS 24
#define DOGLCD_MOSI -1
#define DOGLCD_SCK -1
// The encoder and click button
#define BTN_EN1 23
#define BTN_EN2 25
#define BTN_ENC 27
#define BTN_EN1 23
#define BTN_EN2 25
#define BTN_ENC 27
// Hardware buttons for manual movement of XYZ
#define SHIFT_OUT 19
#define SHIFT_LD 18
#define SHIFT_CLK 17
//#define UI1 31
//#define UI2 22
// Other
#define SDSS 53
#define SD_DETECT_PIN 13
#define STAT_LED_BLUE -1
#define STAT_LED_RED 31
#define SHIFT_OUT 19
#define SHIFT_LD 18
#define SHIFT_CLK 17
//#define UI1 31
//#define UI2 22
//
// Misc. Functions
//
#define STAT_LED_BLUE -1
#define STAT_LED_RED 31

173
Marlin/pins_CNCONTROLS_12.h
Unescape Escape View File

@ -10,96 +10,115 @@
//#define LARGE_FLASH true
#define X_ENABLE_PIN 26
#define X_STEP_PIN 25
#define X_DIR_PIN 27
#define X_MIN_PIN 19
#define X_MAX_PIN -1
#define Y_ENABLE_PIN 29
#define Y_STEP_PIN 28
#define Y_DIR_PIN 30
#define Y_MIN_PIN 22
#define Y_MAX_PIN -1
#define Z_ENABLE_PIN 32
#define Z_STEP_PIN 31
#define Z_DIR_PIN 33
#define Z_MIN_PIN 23
#define Z_MAX_PIN -1
#define E0_ENABLE_PIN 58
#define E0_STEP_PIN 57
#define E0_DIR_PIN 55
#define HEATER_0_PIN 11
#define TEMP_0_PIN 0 // ANALOG INPUT !!
#define E1_ENABLE_PIN 60
#define E1_STEP_PIN 61
#define E1_DIR_PIN 62
#define HEATER_1_PIN 9
#define TEMP_1_PIN 9 // 9 for tool2 -> 13 for chambertemp
#define E2_ENABLE_PIN 44
#define E2_STEP_PIN 46
#define E2_DIR_PIN 66
#define HEATER_2_PIN 6
#define TEMP_2_PIN 13 // 10 for tool3 -> 13 for chambertemp
#define E3_ENABLE_PIN 47
#define E3_STEP_PIN 45
#define E3_DIR_PIN 69
#define HEATER_3_PIN 3
#define TEMP_3_PIN 11 // 11 for tool4 -> 13 for chambertemp
#define HEATER_BED_PIN 24
#define TEMP_BED_PIN 14 // ANALOG INPUT !!
//
// Limit Switches
//
#define X_STOP_PIN 19
#define Y_STOP_PIN 22
#define Z_STOP_PIN 23
//
// Steppers
//
#define X_STEP_PIN 25
#define X_DIR_PIN 27
#define X_ENABLE_PIN 26
#define Y_STEP_PIN 28
#define Y_DIR_PIN 30
#define Y_ENABLE_PIN 29
#define Z_STEP_PIN 31
#define Z_DIR_PIN 33
#define Z_ENABLE_PIN 32
#define E0_STEP_PIN 57
#define E0_DIR_PIN 55
#define E0_ENABLE_PIN 58
#define E1_STEP_PIN 61
#define E1_DIR_PIN 62
#define E1_ENABLE_PIN 60
#define E2_STEP_PIN 46
#define E2_DIR_PIN 66
#define E2_ENABLE_PIN 44
#define E3_STEP_PIN 45
#define E3_DIR_PIN 69
#define E3_ENABLE_PIN 47
//
// Temperature Sensors
//
#define TEMP_0_PIN 0 // ANALOG INPUT !!
#define TEMP_1_PIN 9 // 9 for tool2 -> 13 for chambertemp
#define TEMP_2_PIN 13 // 10 for tool3 -> 13 for chambertemp
#define TEMP_3_PIN 11 // 11 for tool4 -> 13 for chambertemp
#define TEMP_BED_PIN 14 // ANALOG INPUT !!
//#define TEMP_CHAMBER_PIN 13 // ANALOG INPUT !!
//
// Heaters / Fans
//
#define HEATER_0_PIN 11
#define HEATER_1_PIN 9
#define HEATER_2_PIN 6
#define HEATER_3_PIN 3
#define HEATER_BED_PIN 24
#define FAN_PIN 5 // 5 is PWMtool3 -> 7 is common PWM pin for all tools
//#define PWM_1_PIN 12
//#define PWM_2_PIN 13
//#define SPARE_IO 17
// Tools
//#define TOOL_0_PIN 56
//#define TOOL_0_PWM_PIN 10 // red warning led at dual extruder
//#define TOOL_1_PIN 59
//#define TOOL_1_PWM_PIN 8 // lights at dual extruder
//#define TOOL_2_PIN 4
//#define TOOL_2_PWM_PIN 5
//#define TOOL_3_PIN 14
//#define TOOL_3_PWM_PIN 2
//#define TOOL_0_PIN 56
//#define TOOL_0_PWM_PIN 10 // red warning led at dual extruder
//#define TOOL_1_PIN 59
//#define TOOL_1_PWM_PIN 8 // lights at dual extruder
//#define TOOL_2_PIN 4
//#define TOOL_2_PWM_PIN 5
//#define TOOL_3_PIN 14
//#define TOOL_3_PWM_PIN 2
// Common I/O
//#define TEMP_CHAMBER_PIN 13 // ANALOG INPUT !!
#define FIL_RUNOUT_PIN 18
//#define PWM_1_PIN 12
//#define PWM_2_PIN 13
//#define SPARE_IO 17
#define FAN_PIN 5 // 5 is PWMtool3 -> 7 is common PWM pin for all tools
// User interface
#define BEEPER_PIN 16
//
// LCD / Controller
//
#define BEEPER_PIN 16
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 39
#define DOGLCD_CS 35
#define DOGLCD_MOSI 48
#define DOGLCD_SCK 49
#define DOGLCD_A0 39
#define DOGLCD_CS 35
#define DOGLCD_MOSI 48
#define DOGLCD_SCK 49
#define LCD_SCREEN_ROT_180
// The encoder and click button
#define BTN_EN1 36
#define BTN_EN2 34
#define BTN_ENC 38
#define BTN_EN1 36
#define BTN_EN2 34
#define BTN_ENC 38
// Hardware buttons for manual movement of XYZ
#define SHIFT_OUT 42
#define SHIFT_LD 41
#define SHIFT_CLK 40
#define SHIFT_OUT 42
#define SHIFT_LD 41
#define SHIFT_CLK 40
//#define UI1 43
//#define UI2 37
#define STAT_LED_BLUE -1
#define STAT_LED_RED 10 // TOOL_0_PWM_PIN
//#define UI1 43
//#define UI2 37
//
// SD Card
//
#define SDSS 53
#define SD_DETECT_PIN 15
// Other
#define SDSS 53
#define SD_DETECT_PIN 15
#define STAT_LED_BLUE -1
#define STAT_LED_RED 10 // TOOL_0_PWM_PIN
#define FIL_RUNOUT_PIN 18

84
Marlin/pins_ELEFU_3.h
Unescape Escape View File

@ -28,58 +28,82 @@
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "Elefu Ra v3"
#define BOARD_NAME "Elefu Ra v3"
//
// Limit Switches
//
#define X_MIN_PIN 35
#define X_MAX_PIN 34
#define Y_MIN_PIN 33
#define Y_MAX_PIN 32
#define Z_MIN_PIN 31
#define Z_MAX_PIN 30
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 30
#endif
//
// Steppers
//
#define X_STEP_PIN 49
#define X_DIR_PIN 13
#define X_ENABLE_PIN 48
#define X_MIN_PIN 35
#define X_MAX_PIN 34
#define Y_STEP_PIN 11
#define Y_DIR_PIN 9
#define Y_ENABLE_PIN 12
#define Y_MIN_PIN 33
#define Y_MAX_PIN 32
#define Z_STEP_PIN 7
#define Z_DIR_PIN 6
#define Z_ENABLE_PIN 8
#define Z_MIN_PIN 31
#define Z_MAX_PIN 30
#define E2_STEP_PIN 43
#define E2_DIR_PIN 47
#define E2_ENABLE_PIN 42
#define E1_STEP_PIN 18
#define E1_DIR_PIN 19
#define E1_ENABLE_PIN 38
#define E0_STEP_PIN 40
#define E0_DIR_PIN 41
#define E0_ENABLE_PIN 37
#define FAN_PIN 16 //5V PWM
#define E1_STEP_PIN 18
#define E1_DIR_PIN 19
#define E1_ENABLE_PIN 38
#define PS_ON_PIN 10 //Set to -1 if using a manual switch on the PWRSW Connector
#define SLEEP_WAKE_PIN 26 //This feature still needs work
#define E2_STEP_PIN 43
#define E2_DIR_PIN 47
#define E2_ENABLE_PIN 42
#define HEATER_0_PIN 45 //12V PWM1
#define HEATER_1_PIN 46 //12V PWM2
#define HEATER_2_PIN 17 //12V PWM3
#define HEATER_BED_PIN 44 //DOUBLE 12V PWM
#define TEMP_0_PIN 3 //ANALOG NUMBERING
#define TEMP_1_PIN 2 //ANALOG NUMBERING
#define TEMP_2_PIN 1 //ANALOG NUMBERING
#define TEMP_BED_PIN 0 //ANALOG NUMBERING
//
// Temperature Sensors
//
#define TEMP_0_PIN 3 // ANALOG NUMBERING
#define TEMP_1_PIN 2 // ANALOG NUMBERING
#define TEMP_2_PIN 1 // ANALOG NUMBERING
#define TEMP_BED_PIN 0 // ANALOG NUMBERING
//
// Heaters / Fans
//
#define HEATER_0_PIN 45 // 12V PWM1
#define HEATER_1_PIN 46 // 12V PWM2
#define HEATER_2_PIN 17 // 12V PWM3
#define HEATER_BED_PIN 44 // DOUBLE 12V PWM
#define FAN_PIN 16 // 5V PWM
//
// Misc. Functions
//
#define PS_ON_PIN 10 // Set to -1 if using a manual switch on the PWRSW Connector
#define SLEEP_WAKE_PIN 26 // This feature still needs work
#define PHOTOGRAPH_PIN 29
//
// LCD / Controller
//
#define BEEPER_PIN 36
// M240 Triggers a camera by emulating a Canon RC-1 Remote
// Data from: http://www.doc-diy.net/photo/rc-1_hacked/
#define PHOTOGRAPH_PIN 29
#if ENABLED(RA_CONTROL_PANEL)
#define SDSS 53

62
Marlin/pins_GEN3_MONOLITHIC.h
Unescape Escape View File

@ -31,39 +31,45 @@
#define BOARD_NAME "Gen3 Monolithic"
#define DEBUG_PIN 0
// x axis
#define X_STEP_PIN 15
#define X_DIR_PIN 18
#define X_MIN_PIN 20
// Alex Checar #define X_STOP_PIN 20
#define X_ENABLE_PIN 24 // actually uses Y_enable_pin
#define X_MAX_PIN -1
//
// Limit Switches
//
#define X_STOP_PIN 20
#define Y_STOP_PIN 25
#define Z_STOP_PIN 30
// y axis
#define Y_STEP_PIN 23
#define Y_DIR_PIN 22
#define Y_MIN_PIN 25
// Alex Checar #define Y_STOP_PIN 25
#define Y_ENABLE_PIN 24 // shared with X_enable_pin
#define Y_MAX_PIN -1
//
// Steppers
//
#define X_STEP_PIN 15
#define X_DIR_PIN 18
#define X_ENABLE_PIN 24 // actually uses Y_enable_pin
// z axis
#define Z_STEP_PIN 27
#define Z_DIR_PIN 28
#define Z_MIN_PIN 30
// Alex Checar #define Z_STOP_PIN 30
#define Z_ENABLE_PIN 29
#define Z_MAX_PIN -1
#define Y_STEP_PIN 23
#define Y_DIR_PIN 22
#define Y_ENABLE_PIN 24 // shared with X_enable_pin
// extruder pins
#define E0_STEP_PIN 12
#define E0_DIR_PIN 17
#define Z_STEP_PIN 27
#define Z_DIR_PIN 28
#define Z_ENABLE_PIN 29
#define E0_STEP_PIN 12
#define E0_DIR_PIN 17
#define E0_ENABLE_PIN 3
#define HEATER_0_PIN 16
#define TEMP_0_PIN 0
//
// Temperature Sensors
//
#define TEMP_0_PIN 0
//
// Heaters
//
#define HEATER_0_PIN 16
// pin for controlling the PSU.
#define PS_ON_PIN 14 // Alex, Do this work on the card?
//
// Etc.
//
#define PS_ON_PIN 14 // Alex, does this work on the card?
// Alex extras from Gen3+

42
Marlin/pins_GEN3_PLUS.h
Unescape Escape View File

@ -30,31 +30,47 @@
#define BOARD_NAME "Gen3+"
//
// Limit Switches
//
#define X_STOP_PIN 20
#define Y_STOP_PIN 25
#define Z_STOP_PIN 30
//
// Steppers
//
#define X_STEP_PIN 15
#define X_DIR_PIN 18
#define X_STOP_PIN 20
#define X_ENABLE_PIN 19
#define Y_STEP_PIN 23
#define Y_DIR_PIN 22
#define Y_STOP_PIN 25
#define Y_ENABLE_PIN 24
#define Z_STEP_PIN 27
#define Z_DIR_PIN 28
#define Z_STOP_PIN 30
#define Z_ENABLE_PIN 29
#define E0_STEP_PIN 17
#define E0_DIR_PIN 21
#define E0_ENABLE_PIN 13
#define PS_ON_PIN 14
#define PS_ON_PIN 14
#define HEATER_0_PIN 12 // (extruder)
//
// Temperature Sensors
//
#define TEMP_0_PIN 0 // ANALOG INPUT (pin 33 extruder)
#define TEMP_BED_PIN 5 // ANALOG INPUT (pin 34 bed)
#define HEATER_BED_PIN 16 // (bed)
#define X_ENABLE_PIN 19
#define Y_ENABLE_PIN 24
#define Z_ENABLE_PIN 29
#define E0_ENABLE_PIN 13
//
// Heaters
//
#define HEATER_0_PIN 12
#define HEATER_BED_PIN 16
#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder)
#define TEMP_BED_PIN 5 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)
#define SDSS 4
//
// SD Card
//
#define SDSS 4

73
Marlin/pins_GEN6.h
Unescape Escape View File

@ -34,42 +34,57 @@
#define BOARD_NAME "Gen6"
#endif
//x axis pins
#define X_STEP_PIN 15
#define X_DIR_PIN 18
#define X_ENABLE_PIN 19
#define X_STOP_PIN 20
//
// Limit Switches
//
#define X_STOP_PIN 20
#define Y_STOP_PIN 25
#define Z_STOP_PIN 30
//y axis pins
#define Y_STEP_PIN 23
#define Y_DIR_PIN 22
#define Y_ENABLE_PIN 24
#define Y_STOP_PIN 25
//
// Steppers
//
#define X_STEP_PIN 15
#define X_DIR_PIN 18
#define X_ENABLE_PIN 19
//z axis pins
#define Z_STEP_PIN 27
#define Z_DIR_PIN 28
#define Z_ENABLE_PIN 29
#define Z_STOP_PIN 30
#define Y_STEP_PIN 23
#define Y_DIR_PIN 22
#define Y_ENABLE_PIN 24
//extruder pins
#define E0_STEP_PIN 4 //Edited @ EJE Electronics 20100715
#define E0_DIR_PIN 2 //Edited @ EJE Electronics 20100715
#define E0_ENABLE_PIN 3 //Added @ EJE Electronics 20100715
#define TEMP_0_PIN 5 //changed @ rkoeppl 20110410
#define Z_STEP_PIN 27
#define Z_DIR_PIN 28
#define Z_ENABLE_PIN 29
#define HEATER_0_PIN 14 //changed @ rkoeppl 20110410
#define E0_STEP_PIN 4 //Edited @ EJE Electronics 20100715
#define E0_DIR_PIN 2 //Edited @ EJE Electronics 20100715
#define E0_ENABLE_PIN 3 //Added @ EJE Electronics 20100715
//
// Temperature Sensor
//
#define TEMP_0_PIN 5 //changed @ rkoeppl 20110410
//
// Heaters
//
#define HEATER_0_PIN 14 //changed @ rkoeppl 20110410
#if !MB(GEN6)
#define HEATER_BED_PIN 1 //changed @ rkoeppl 20110410
#define TEMP_BED_PIN 0 //changed @ rkoeppl 20110410
#define HEATER_BED_PIN 1 //changed @ rkoeppl 20110410
#define TEMP_BED_PIN 0 //changed @ rkoeppl 20110410
#endif
#define SDSS 17
//our pin for debugging.
//
// SD Card
//
#define SDSS 17
#define DEBUG_PIN 0
//
// Misc. Functions
//
#define DEBUG_PIN 0
//our RS485 pins
#define TX_ENABLE_PIN 12
#define RX_ENABLE_PIN 13
// RS485 pins
#define TX_ENABLE_PIN 12
#define RX_ENABLE_PIN 13

100
Marlin/pins_GEN7_12.h
Unescape Escape View File

@ -36,52 +36,68 @@
#define GEN7_VERSION 12 // v1.x
#endif
//x axis pins
#define X_STEP_PIN 19
#define X_DIR_PIN 18
#define X_ENABLE_PIN 24
#define X_STOP_PIN 7
//y axis pins
#define Y_STEP_PIN 23
#define Y_DIR_PIN 22
#define Y_ENABLE_PIN 24
#define Y_STOP_PIN 5
//z axis pins
#define Z_STEP_PIN 26
#define Z_DIR_PIN 25
#define Z_ENABLE_PIN 24
#define Z_MIN_PIN 1
#define Z_MAX_PIN 0
//extruder pins
#define E0_STEP_PIN 28
#define E0_DIR_PIN 27
#define E0_ENABLE_PIN 24
#define TEMP_0_PIN 1
#define TEMP_BED_PIN 2
#define HEATER_0_PIN 4
#define HEATER_BED_PIN 3
// Gen7 v1.3 removed the fan pin
#if GEN7_VERSION < 13
#define FAN_PIN 31
//
// Limit Switches
//
#define X_STOP_PIN 7
#define Y_STOP_PIN 5
#define Z_MIN_PIN 1
#define Z_MAX_PIN 0
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 0
#endif
#define PS_ON_PIN 15
//
// Steppers
//
#define X_STEP_PIN 19
#define X_DIR_PIN 18
#define X_ENABLE_PIN 24
#define Y_STEP_PIN 23
#define Y_DIR_PIN 22
#define Y_ENABLE_PIN 24
#define Z_STEP_PIN 26
#define Z_DIR_PIN 25
#define Z_ENABLE_PIN 24
#define E0_STEP_PIN 28
#define E0_DIR_PIN 27
#define E0_ENABLE_PIN 24
//
// Temperature Sensors
//
#define TEMP_0_PIN 1
#define TEMP_BED_PIN 2
//
// Heaters / Fans
//
#define HEATER_0_PIN 4
#define HEATER_BED_PIN 3
#if GEN7_VERSION < 13 // Gen7 v1.3 removed the fan pin
#define FAN_PIN 31
#endif
//
// Misc. Functions
//
#define PS_ON_PIN 15
//All these generations of Gen7 supply thermistor power
//via PS_ON, so ignore bad thermistor readings
// All these generations of Gen7 supply thermistor power
// via PS_ON, so ignore bad thermistor readings
#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
//our pin for debugging.
#define DEBUG_PIN 0
#define DEBUG_PIN 0
//our RS485 pins
#define TX_ENABLE_PIN 12
#define RX_ENABLE_PIN 13
// RS485 pins
#define TX_ENABLE_PIN 12
#define RX_ENABLE_PIN 13

57
Marlin/pins_LEAPFROG.h
Unescape Escape View File

@ -30,44 +30,63 @@
#define BOARD_NAME "Leapfrog"
//
// Limit Switches
//
#define X_MIN_PIN 47
#define X_MAX_PIN 2
#define Y_MIN_PIN 48
#define Y_MAX_PIN 15
#define Z_MIN_PIN 49
#define Z_MAX_PIN -1
//
// Steppers
//
#define X_STEP_PIN 28
#define X_DIR_PIN 63
#define X_ENABLE_PIN 29
#define X_MIN_PIN 47
#define X_MAX_PIN 2 //Max endstops default to disabled "-1", set to commented value to enable.
#define Y_STEP_PIN 14 // A6
#define Y_DIR_PIN 15 // A0
#define Y_ENABLE_PIN 39
#define Y_MIN_PIN 48
#define Y_MAX_PIN 15
#define Z_STEP_PIN 31 // A2
#define Z_DIR_PIN 32 // A6
#define Z_ENABLE_PIN 30 // A1
#define Z_MIN_PIN 49
#define Z_MAX_PIN -1
#define E0_STEP_PIN 34 //34
#define E0_DIR_PIN 35 //35
#define E0_ENABLE_PIN 33 //33
#define E0_STEP_PIN 34 // 34
#define E0_DIR_PIN 35 // 35
#define E0_ENABLE_PIN 33 // 33
#define E1_STEP_PIN 37 //37
#define E1_DIR_PIN 40 //40
#define E1_ENABLE_PIN 36 //36
#define E1_STEP_PIN 37 // 37
#define E1_DIR_PIN 40 // 40
#define E1_ENABLE_PIN 36 // 36
//
// Misc. Functions
//
#define SDSS 11
#define LED_PIN 13
#define FAN_PIN 7
#define SOL1_PIN 16
#define SOL2_PIN 17
#define SOL1_PIN 16
#define SOL2_PIN 17
#define HEATER_0_PIN 9
#define HEATER_1_PIN 8 // 12
#define HEATER_2_PIN 11 //-1 // 13
//
// Temperature Sensors
//
#define TEMP_0_PIN 13 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define TEMP_1_PIN 15 // 1
#define HEATER_BED_PIN 10 // 14/15
#define TEMP_BED_PIN 14 // 1,2 or I2C
//
// Heaters / Fans
//
#define HEATER_0_PIN 9
#define HEATER_1_PIN 8 // 12
#define HEATER_2_PIN 11 // 13
#define HEATER_BED_PIN 10 // 14/15
#define FAN_PIN 7
/* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */

150
Marlin/pins_MEGACONTROLLER.h
Unescape Escape View File

@ -34,79 +34,109 @@
#define BOARD_NAME "Mega Controller"
#define SERVO0_PIN 30
#define SERVO1_PIN 31
#define SERVO2_PIN 32
#define SERVO3_PIN 33
#define X_STEP_PIN 62//A8
#define X_DIR_PIN 63//A9
#define X_ENABLE_PIN 61//A7
#define X_MIN_PIN 43
#define X_MAX_PIN 42 //Max endstops default to disabled "-1", set to commented value to enable.
#define Y_STEP_PIN 65 // A11
#define Y_DIR_PIN 66 // A12
#define Y_ENABLE_PIN 64//A10
#define Y_MIN_PIN 38
#define Y_MAX_PIN 41
#define Z_STEP_PIN 68 // A14
#define Z_DIR_PIN 69 // A15
#define Z_ENABLE_PIN 67 // A13
#define Z_MIN_PIN 40
#define Z_MAX_PIN 37
#define E0_STEP_PIN 23
#define E0_DIR_PIN 24
#define E0_ENABLE_PIN 22
#define E1_STEP_PIN 26
#define E1_DIR_PIN 27
#define E1_ENABLE_PIN 25
#define SDSS 53
#define LED_PIN 13
#define FAN_PIN 39
#define FAN1_PIN 35
#define FAN2_PIN 36
#define FAN_SOFT_PWM
#define CONTROLLERFAN_PIN FAN2_PIN
#define HEATER_0_PIN 29 // EXTRUDER 1
#define HEATER_1_PIN 34 // EXTRUDER 2
//
// Servos
//
#define SERVO0_PIN 30
#define SERVO1_PIN 31
#define SERVO2_PIN 32
#define SERVO3_PIN 33
//
// Limit Switches
//
#define X_MIN_PIN 43
#define X_MAX_PIN 42
#define Y_MIN_PIN 38
#define Y_MAX_PIN 41
#define Z_MIN_PIN 40
#define Z_MAX_PIN 37
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 37
#endif
//
// Steppers
//
#define X_STEP_PIN 62 // A8
#define X_DIR_PIN 63 // A9
#define X_ENABLE_PIN 61 // A7
#define Y_STEP_PIN 65 // A11
#define Y_DIR_PIN 66 // A12
#define Y_ENABLE_PIN 64 // A10
#define Z_STEP_PIN 68 // A14
#define Z_DIR_PIN 69 // A15
#define Z_ENABLE_PIN 67 // A13
#define E0_STEP_PIN 23
#define E0_DIR_PIN 24
#define E0_ENABLE_PIN 22
#define E1_STEP_PIN 26
#define E1_DIR_PIN 27
#define E1_ENABLE_PIN 25
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
//
// Temperature Sensors
//
#if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 4 // ANALOG NUMBERING
#define TEMP_0_PIN 4 // ANALOG NUMBERING
#else
#define TEMP_0_PIN 0 // ANALOG NUMBERING
#define TEMP_0_PIN 0 // ANALOG NUMBERING
#endif
#if TEMP_SENSOR_1 == -1
#define TEMP_1_PIN 5 // ANALOG NUMBERING
#define TEMP_1_PIN 5 // ANALOG NUMBERING
#else
#define TEMP_1_PIN 2 // ANALOG NUMBERING
#define TEMP_1_PIN 2 // ANALOG NUMBERING
#endif
#define TEMP_2_PIN 3 // ANALOG NUMBERING
#define HEATER_BED_PIN 28 // BED
#define TEMP_2_PIN 3 // ANALOG NUMBERING
#if TEMP_SENSOR_BED == -1
#define TEMP_BED_PIN 6 // ANALOG NUMBERING
#define TEMP_BED_PIN 6 // ANALOG NUMBERING
#else
#define TEMP_BED_PIN 1 // ANALOG NUMBERING
#define TEMP_BED_PIN 1 // ANALOG NUMBERING
#endif
//
// Heaters / Fans
//
#define HEATER_0_PIN 29
#define HEATER_1_PIN 34
#define HEATER_BED_PIN 28
#define FAN_PIN 39
#define FAN1_PIN 35
#define FAN2_PIN 36
#define CONTROLLERFAN_PIN FAN2_PIN
#define FAN_SOFT_PWM
//
// LCD / Controller
//
#if ENABLED(MINIPANEL)
#define BEEPER_PIN 46
#define BEEPER_PIN 46
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 47
#define DOGLCD_CS 45
#define LCD_PIN_BL 44 // backlight LED on PA3
#define DOGLCD_A0 47
#define DOGLCD_CS 45
#define LCD_PIN_BL 44 // backlight LED on PA3
#define KILL_PIN 12
#define KILL_PIN 12
// GLCD features
//#define LCD_CONTRAST 190
// Uncomment screen orientation
@ -114,10 +144,10 @@
//#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270
#define BTN_EN1 48
#define BTN_EN2 11
#define BTN_ENC 10
#define BTN_EN1 48
#define BTN_EN2 11
#define BTN_ENC 10
#define SD_DETECT_PIN 49
#define SD_DETECT_PIN 49
#endif // MINIPANEL

51
Marlin/pins_MEGATRONICS.h
Unescape Escape View File

@ -31,23 +31,37 @@
#define BOARD_NAME "Megatronics"
#define LARGE_FLASH true
//
// Limit Switches
//
#define X_MIN_PIN 41
#define X_MAX_PIN 37
#define Y_MIN_PIN 14
#define Y_MAX_PIN 15
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 19
#endif
//
// Steppers
//
#define X_STEP_PIN 26
#define X_DIR_PIN 28
#define X_ENABLE_PIN 24
#define X_MIN_PIN 41
#define X_MAX_PIN 37
#define Y_STEP_PIN 60 // A6
#define Y_DIR_PIN 61 // A7
#define Y_ENABLE_PIN 22
#define Y_MIN_PIN 14
#define Y_MAX_PIN 15
#define Z_STEP_PIN 54 // A0
#define Z_DIR_PIN 55 // A1
#define Z_ENABLE_PIN 56 // A2
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
#define E0_STEP_PIN 31
#define E0_DIR_PIN 32
@ -57,16 +71,16 @@
#define E1_DIR_PIN 36
#define E1_ENABLE_PIN 30
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
#define FAN_PIN 7 // IO pin. Buffer needed
#define PS_ON_PIN 12
#define HEATER_0_PIN 9
#define HEATER_1_PIN 8
#define HEATER_BED_PIN 10 // BED
//
// Temperature Sensors
//
#if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 8 // ANALOG NUMBERING
#else
@ -75,7 +89,18 @@
#define TEMP_1_PIN 15 // ANALOG NUMBERING
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
// AUX-4
//
// Heaters / Fans
//
#define HEATER_0_PIN 9
#define HEATER_1_PIN 8
#define HEATER_BED_PIN 10
#define FAN_PIN 7 // IO pin. Buffer needed
//
// LCD / Controller
//
#define BEEPER_PIN 33
#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)

139
Marlin/pins_MEGATRONICS_2.h
Unescape Escape View File

@ -31,74 +31,101 @@
#define BOARD_NAME "Megatronics v2.0"
#define LARGE_FLASH true
#define X_STEP_PIN 26
#define X_DIR_PIN 27
#define X_ENABLE_PIN 25
#define X_MIN_PIN 37
#define X_MAX_PIN 40
#define Y_STEP_PIN 4 // A6
#define Y_DIR_PIN 54 // A0
#define Y_ENABLE_PIN 5
#define Y_MIN_PIN 41
#define Y_MAX_PIN 38
#define Z_STEP_PIN 56 // A2
#define Z_DIR_PIN 60 // A6
#define Z_ENABLE_PIN 55 // A1
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
#define E0_STEP_PIN 35
#define E0_DIR_PIN 36
#define E0_ENABLE_PIN 34
#define E1_STEP_PIN 29
#define E1_DIR_PIN 39
#define E1_ENABLE_PIN 28
#define E2_STEP_PIN 23
#define E2_DIR_PIN 24
#define E2_ENABLE_PIN 22
#define SDSS 53
#define LED_PIN 13
#define FAN_PIN 7
#define FAN2_PIN 6
#define PS_ON_PIN 12
#define HEATER_0_PIN 9 // EXTRUDER 1
//
// Limit Switches
//
#define X_MIN_PIN 37
#define X_MAX_PIN 40
#define Y_MIN_PIN 41
#define Y_MAX_PIN 38
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 19
#endif
//
// Steppers
//
#define X_STEP_PIN 26
#define X_DIR_PIN 27
#define X_ENABLE_PIN 25
#define Y_STEP_PIN 4 // A6
#define Y_DIR_PIN 54 // A0
#define Y_ENABLE_PIN 5
#define Z_STEP_PIN 56 // A2
#define Z_DIR_PIN 60 // A6
#define Z_ENABLE_PIN 55 // A1
#define E0_STEP_PIN 35
#define E0_DIR_PIN 36
#define E0_ENABLE_PIN 34
#define E1_STEP_PIN 29
#define E1_DIR_PIN 39
#define E1_ENABLE_PIN 28
#define E2_STEP_PIN 23
#define E2_DIR_PIN 24
#define E2_ENABLE_PIN 22
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
#define PS_ON_PIN 12
//
// Temperature Sensors
//
#if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 4 // ANALOG NUMBERING
#define TEMP_0_PIN 4 // ANALOG NUMBERING
#else
#define TEMP_0_PIN 13 // ANALOG NUMBERING
#define TEMP_0_PIN 13 // ANALOG NUMBERING
#endif
#define HEATER_1_PIN 8 // EXTRUDER 2
#if TEMP_SENSOR_1 == -1
#define TEMP_1_PIN 8 // ANALOG NUMBERING
#define TEMP_1_PIN 8 // ANALOG NUMBERING
#else
#define TEMP_1_PIN 15 // ANALOG NUMBERING
#define TEMP_1_PIN 15 // ANALOG NUMBERING
#endif
#define HEATER_BED_PIN 10 // BED
#if TEMP_SENSOR_BED == -1
#define TEMP_BED_PIN 8 // ANALOG NUMBERING
#define TEMP_BED_PIN 8 // ANALOG NUMBERING
#else
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
#endif
#define BEEPER_PIN 64
//
// Heaters / Fans
//
#define HEATER_0_PIN 9
#define HEATER_1_PIN 8
#define HEATER_BED_PIN 10
#define FAN_PIN 7
#define FAN1_PIN 6
//
// LCD / Controller
//
#define BEEPER_PIN 64
#define LCD_PINS_RS 14
#define LCD_PINS_ENABLE 15
#define LCD_PINS_D4 30
#define LCD_PINS_D5 31
#define LCD_PINS_D6 32
#define LCD_PINS_D7 33
#define LCD_PINS_RS 14
#define LCD_PINS_ENABLE 15
#define LCD_PINS_D4 30
#define LCD_PINS_D5 31
#define LCD_PINS_D6 32
#define LCD_PINS_D7 33
// Buttons are directly attached using keypad
#define BTN_EN1 61
#define BTN_EN2 59
#define BTN_ENC 43
#define BTN_EN1 61
#define BTN_EN2 59
#define BTN_ENC 43

136
Marlin/pins_MEGATRONICS_3.h
Unescape Escape View File

@ -38,33 +38,45 @@
#define LARGE_FLASH true
#if ENABLED(Z_PROBE_SLED)
#define SLED_PIN -1
#endif
// Servo support
//
// Servos
//
#define SERVO0_PIN 46 // AUX3-6
#define SERVO1_PIN 47 // AUX3-5
#define SERVO2_PIN 48 // AUX3-4
#define SERVO3_PIN 49 // AUX3-3
//
// Limit Switches
//
#define X_MIN_PIN 37
#define X_MAX_PIN 40
#define Y_MIN_PIN 41
#define Y_MAX_PIN 38
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 19
#endif
//
// Steppers
//
#define X_STEP_PIN 58
#define X_DIR_PIN 57
#define X_ENABLE_PIN 59
#define X_MIN_PIN 37
#define X_MAX_PIN 40
#define Y_STEP_PIN 5
#define Y_STEP_PIN 5
#define Y_DIR_PIN 17
#define Y_ENABLE_PIN 4
#define Y_MIN_PIN 41
#define Y_MAX_PIN 38
#define Y_ENABLE_PIN 4
#define Z_STEP_PIN 16
#define Z_DIR_PIN 11
#define Z_ENABLE_PIN 3
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
#define Z_ENABLE_PIN 3
#define E0_STEP_PIN 28
#define E0_DIR_PIN 27
@ -78,70 +90,80 @@
#define E2_DIR_PIN 60
#define E2_ENABLE_PIN 23
#define SDSS 53
#define LED_PIN 13
#define PS_ON_PIN 12
#define HEATER_0_PIN 2
#define HEATER_1_PIN 9
#define HEATER_2_PIN 8
#define HEATER_BED_PIN 10
#define FAN_PIN 6
#define FAN2_PIN 7
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
#define PS_ON_PIN 12
#define SLED_PIN -1
//
// Temperature Sensors
//
#if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 11 // ANALOG NUMBERING
#define TEMP_0_PIN 11 // ANALOG NUMBERING
#else
#define TEMP_0_PIN 15 // ANALOG NUMBERING
#define TEMP_0_PIN 15 // ANALOG NUMBERING
#endif
#if TEMP_SENSOR_1 == -1
#define TEMP_1_PIN 10 // ANALOG NUMBERING
#define TEMP_1_PIN 10 // ANALOG NUMBERING
#else
#define TEMP_1_PIN 13 // ANALOG NUMBERING
#define TEMP_1_PIN 13 // ANALOG NUMBERING
#endif
#if TEMP_SENSOR_2 == -1
#define TEMP_2_PIN 9 // ANALOG NUMBERING
#define TEMP_2_PIN 9 // ANALOG NUMBERING
#else
#define TEMP_2_PIN 12 // ANALOG NUMBERING
#define TEMP_2_PIN 12 // ANALOG NUMBERING
#endif
#if TEMP_SENSOR_BED == -1
#define TEMP_BED_PIN 8 // ANALOG NUMBERING
#define TEMP_BED_PIN 8 // ANALOG NUMBERING
#else
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
#endif
/**
* Controllers and LCDs
*/
#define BEEPER_PIN 61
//
// Heaters / Fans
//
#define HEATER_0_PIN 2
#define HEATER_1_PIN 9
#define HEATER_2_PIN 8
#define HEATER_BED_PIN 10
#define FAN_PIN 6
#define FAN1_PIN 7
//
// LCD / Controller
//
#define BEEPER_PIN 61
#define BTN_EN1 44
#define BTN_EN2 45
#define BTN_ENC 33
#define BTN_EN1 44
#define BTN_EN2 45
#define BTN_ENC 33
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define LCD_PINS_RS 56 // CS chip select / SS chip slave select
#define LCD_PINS_ENABLE 51 // SID (MOSI)
#define LCD_PINS_D4 52 // SCK (CLK) clock
#define SD_DETECT_PIN 35
#define LCD_PINS_RS 56 // CS chip select / SS chip slave select
#define LCD_PINS_ENABLE 51 // SID (MOSI)
#define LCD_PINS_D4 52 // SCK (CLK) clock
#define SD_DETECT_PIN 35
#else
#define LCD_PINS_RS 32
#define LCD_PINS_ENABLE 31
#define LCD_PINS_D4 14
#define LCD_PINS_D5 30
#define LCD_PINS_D6 39
#define LCD_PINS_D7 15
#define LCD_PINS_RS 32
#define LCD_PINS_ENABLE 31
#define LCD_PINS_D4 14
#define LCD_PINS_D5 30
#define LCD_PINS_D6 39
#define LCD_PINS_D7 15
#define SHIFT_CLK 43
#define SHIFT_LD 35
#define SHIFT_OUT 34
#define SHIFT_EN 44
#define SHIFT_CLK 43
#define SHIFT_LD 35
#define SHIFT_OUT 34
#define SHIFT_EN 44
#if ENABLED(MEGATRONICS_31)
#define SD_DETECT_PIN 56
#define SD_DETECT_PIN 56
#else
#define SD_DETECT_PIN -1
#define SD_DETECT_PIN -1
#endif
#endif

142
Marlin/pins_MINIRAMBO.h
Unescape Escape View File

@ -31,52 +31,53 @@
#define BOARD_NAME "Mini Rambo"
#define LARGE_FLASH true
#define X_STEP_PIN 37
#define X_DIR_PIN 48
#define X_MIN_PIN 12
#define X_MAX_PIN 30
#define X_ENABLE_PIN 29
#define X_MS1_PIN 40
#define X_MS2_PIN 41
#define Y_STEP_PIN 36
#define Y_DIR_PIN 49
#define Y_MIN_PIN 11
#define Y_MAX_PIN 24
#define Y_ENABLE_PIN 28
#define Y_MS1_PIN 69
#define Y_MS2_PIN 39
#define Z_STEP_PIN 35
#define Z_DIR_PIN 47
#define Z_MIN_PIN 10
#define Z_MAX_PIN 23
#define Z_ENABLE_PIN 27
#define Z_MS1_PIN 68
#define Z_MS2_PIN 67
#define HEATER_BED_PIN 4
#define TEMP_BED_PIN 2
#define HEATER_0_PIN 3
#define TEMP_0_PIN 0
#define HEATER_1_PIN 7
#define TEMP_1_PIN 1
#if ENABLED(BARICUDA)
#define HEATER_2_PIN 6
//
// Limit Switches
//
#define X_MIN_PIN 12
#define X_MAX_PIN 30
#define Y_MIN_PIN 11
#define Y_MAX_PIN 24
#define Z_MIN_PIN 10
#define Z_MAX_PIN 23
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 23
#endif
#define E0_STEP_PIN 34
#define E0_DIR_PIN 43
#define E0_ENABLE_PIN 26
#define E0_MS1_PIN 65
#define E0_MS2_PIN 66
#define E1_STEP_PIN -1
#define E1_DIR_PIN -1
#define E1_ENABLE_PIN -1
//
// Steppers
//
#define X_STEP_PIN 37
#define X_DIR_PIN 48
#define X_ENABLE_PIN 29
#define X_MS1_PIN 40
#define X_MS2_PIN 41
#define Y_STEP_PIN 36
#define Y_DIR_PIN 49
#define Y_ENABLE_PIN 28
#define Y_MS1_PIN 69
#define Y_MS2_PIN 39
#define Z_STEP_PIN 35
#define Z_DIR_PIN 47
#define Z_ENABLE_PIN 27
#define Z_MS1_PIN 68
#define Z_MS2_PIN 67
#define E0_STEP_PIN 34
#define E0_DIR_PIN 43
#define E0_ENABLE_PIN 26
#define E0_MS1_PIN 65
#define E0_MS2_PIN 66
#define E1_STEP_PIN -1
#define E1_DIR_PIN -1
#define E1_ENABLE_PIN -1
#define MOTOR_CURRENT_PWM_XY_PIN 46
#define MOTOR_CURRENT_PWM_Z_PIN 45
@ -84,33 +85,56 @@
//Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
#define MOTOR_CURRENT_PWM_RANGE 2000
#define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250}
#define SDSS 53
#define LED_PIN 13
#define FAN_PIN 8
#define FAN_1_PIN 6
//
// Temperature Sensors
//
#define TEMP_0_PIN 0
#define TEMP_1_PIN 1
#define TEMP_BED_PIN 2
//
// Heaters / Fans
//
#define HEATER_0_PIN 3
#define HEATER_1_PIN 7
#define HEATER_2_PIN 6
#define HEATER_BED_PIN 4
#define FAN_PIN 8
#define FAN1_PIN 6
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
//
// LCD / Controller
//
#if ENABLED(ULTRA_LCD)
#define KILL_PIN 32
#define KILL_PIN 32
#if ENABLED(NEWPANEL)
// Beeper on AUX-4
#define BEEPER_PIN 84
#define BEEPER_PIN 84
#define LCD_PINS_RS 82
#define LCD_PINS_RS 82
#define LCD_PINS_ENABLE 18
#define LCD_PINS_D4 19
#define LCD_PINS_D5 70
#define LCD_PINS_D6 85
#define LCD_PINS_D7 71
#define LCD_PINS_D4 19
#define LCD_PINS_D5 70
#define LCD_PINS_D6 85
#define LCD_PINS_D7 71
//buttons are directly attached using AUX-2
#define BTN_EN1 14
#define BTN_EN2 72
#define BTN_ENC 9 // the click
#define BTN_EN1 14
#define BTN_EN2 72
#define BTN_ENC 9 // the click
#define SD_DETECT_PIN 15
#define SD_DETECT_PIN 15
#endif //NEWPANEL
#endif //ULTRA_LCD

141
Marlin/pins_MINITRONICS.h
Unescape Escape View File

@ -28,82 +28,95 @@
#error "Oops! Make sure you have 'Minitronics' selected from the 'Tools -> Boards' menu."
#endif
#if HOTENDS > 2
#error "Minitronics supports up to 2 hotends. Comment this line to keep going."
#endif
#define BOARD_NAME "Minitronics v1.0 / v1.1"
#define LARGE_FLASH true
#define X_STEP_PIN 48
#define X_DIR_PIN 47
#define X_ENABLE_PIN 49
#define X_MIN_PIN 5
#define X_MAX_PIN 2
#define Y_STEP_PIN 39 // A6
#define Y_DIR_PIN 40 // A0
#define Y_ENABLE_PIN 38
#define Y_MIN_PIN 2
#define Y_MAX_PIN 15
#define Z_STEP_PIN 42 // A2
#define Z_DIR_PIN 43 // A6
#define Z_ENABLE_PIN 41 // A1
#define Z_MIN_PIN 6
#define Z_MAX_PIN -1
#define E0_STEP_PIN 45
#define E0_DIR_PIN 44
#define E0_ENABLE_PIN 27
#define E1_STEP_PIN 36
#define E1_DIR_PIN 35
#define E1_ENABLE_PIN 37
#define E2_STEP_PIN -1
#define E2_DIR_PIN -1
#define E2_ENABLE_PIN -1
#define SDSS 16
#define LED_PIN 46
#define FAN_PIN 9
#define TEMP_0_PIN 7 // ANALOG NUMBERING
#define TEMP_1_PIN 6 // ANALOG NUMBERING
#define TEMP_BED_PIN 6 // ANALOG NUMBERING
#define HEATER_0_PIN 7 // EXTRUDER 1
#define HEATER_1_PIN 8 // EXTRUDER 2
#define HEATER_BED_PIN 3 // BED
/**
* Controllers and LCDs
*/
#define BEEPER_PIN -1
//
// Limit Switches
//
#define X_MIN_PIN 5
#define X_MAX_PIN 2
#define Y_MIN_PIN 2
#define Y_MAX_PIN 15
#define Z_MIN_PIN 6
#define Z_MAX_PIN -1
//
// Steppers
//
#define X_STEP_PIN 48
#define X_DIR_PIN 47
#define X_ENABLE_PIN 49
#define Y_STEP_PIN 39 // A6
#define Y_DIR_PIN 40 // A0
#define Y_ENABLE_PIN 38
#define Z_STEP_PIN 42 // A2
#define Z_DIR_PIN 43 // A6
#define Z_ENABLE_PIN 41 // A1
#define E0_STEP_PIN 45
#define E0_DIR_PIN 44
#define E0_ENABLE_PIN 27
#define E1_STEP_PIN 36
#define E1_DIR_PIN 35
#define E1_ENABLE_PIN 37
//
// Temperature Sensors
//
#define SDSS 16
#define LED_PIN 46
#define TEMP_0_PIN 7 // ANALOG NUMBERING
#define TEMP_1_PIN 6 // ANALOG NUMBERING
#define TEMP_BED_PIN 6 // ANALOG NUMBERING
//
// Heaters / Fans
//
#define HEATER_0_PIN 7 // EXTRUDER 1
#define HEATER_1_PIN 8 // EXTRUDER 2
#define HEATER_BED_PIN 3 // BED
#define FAN_PIN 9
//
// LCD / Controller
//
#define BEEPER_PIN -1
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define LCD_PINS_RS 15 // CS chip select /SS chip slave select
#define LCD_PINS_ENABLE 11 // SID (MOSI)
#define LCD_PINS_D4 10 // SCK (CLK) clock
#define LCD_PINS_RS 15 // CS chip select /SS chip slave select
#define LCD_PINS_ENABLE 11 // SID (MOSI)
#define LCD_PINS_D4 10 // SCK (CLK) clock
#define BTN_EN1 18
#define BTN_EN2 17
#define BTN_ENC 25
#define BTN_EN1 18
#define BTN_EN2 17
#define BTN_ENC 25
#define SD_DETECT_PIN 30
#define SD_DETECT_PIN 30
#else
#define LCD_PINS_RS -1
#define LCD_PINS_ENABLE -1
#define LCD_PINS_D4 -1
#define LCD_PINS_D5 -1
#define LCD_PINS_D6 -1
#define LCD_PINS_D7 -1
#define LCD_PINS_RS -1
#define LCD_PINS_ENABLE -1
#define LCD_PINS_D4 -1
#define LCD_PINS_D5 -1
#define LCD_PINS_D6 -1
#define LCD_PINS_D7 -1
// Buttons are directly attached using keypad
#define BTN_EN1 -1
#define BTN_EN2 -1
#define BTN_ENC -1
#define BTN_EN1 -1
#define BTN_EN2 -1
#define BTN_ENC -1
#define SD_DETECT_PIN -1 // Minitronics doesn't use this
#define SD_DETECT_PIN -1 // Minitronics doesn't use this
#endif

144
Marlin/pins_RAMBO.h
Unescape Escape View File

@ -32,85 +32,97 @@
#define LARGE_FLASH true
// Servo support
#define SERVO0_PIN 22 // Motor header MX1
#define SERVO1_PIN 23 // Motor header MX2
#define SERVO2_PIN 24 // Motor header MX3
#define SERVO3_PIN 5 // PWM header pin 5
//
// Servos
//
#define SERVO0_PIN 22 // Motor header MX1
#define SERVO1_PIN 23 // Motor header MX2
#define SERVO2_PIN 24 // Motor header MX3
#define SERVO3_PIN 5 // PWM header pin 5
#if ENABLED(Z_PROBE_SLED)
#define SLED_PIN -1
#endif
#define X_MIN_PIN 12
#define X_MAX_PIN 24
#define Y_MIN_PIN 11
#define Y_MAX_PIN 23
#define Z_MIN_PIN 10
#define Z_MAX_PIN 30
//
// Limit Switches
//
#define X_MIN_PIN 12
#define X_MAX_PIN 24
#define Y_MIN_PIN 11
#define Y_MAX_PIN 23
#define Z_MIN_PIN 10
#define Z_MAX_PIN 30
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 10
#define Z_MIN_PROBE_PIN 30
#endif
#define X_STEP_PIN 37
#define X_DIR_PIN 48
#define X_ENABLE_PIN 29
#define X_MS1_PIN 40
#define X_MS2_PIN 41
#define Y_STEP_PIN 36
#define Y_DIR_PIN 49
#define Y_ENABLE_PIN 28
#define Y_MS1_PIN 69
#define Y_MS2_PIN 39
#define Z_STEP_PIN 35
#define Z_DIR_PIN 47
#define Z_ENABLE_PIN 27
#define Z_MS1_PIN 68
#define Z_MS2_PIN 67
#define HEATER_BED_PIN 3
#define TEMP_BED_PIN 2
#define HEATER_0_PIN 9
#define TEMP_0_PIN 0
#define HEATER_1_PIN 7
#define TEMP_1_PIN 1
#if ENABLED(BARICUDA)
#define HEATER_2_PIN 6
#endif
#define E0_STEP_PIN 34
#define E0_DIR_PIN 43
#define E0_ENABLE_PIN 26
#define E0_MS1_PIN 65
#define E0_MS2_PIN 66
#define E1_STEP_PIN 33
#define E1_DIR_PIN 42
#define E1_ENABLE_PIN 25
#define E1_MS1_PIN 63
#define E1_MS2_PIN 64
#define DIGIPOTSS_PIN 38
//
// Steppers
//
#define X_STEP_PIN 37
#define X_DIR_PIN 48
#define X_ENABLE_PIN 29
#define X_MS1_PIN 40
#define X_MS2_PIN 41
#define Y_STEP_PIN 36
#define Y_DIR_PIN 49
#define Y_ENABLE_PIN 28
#define Y_MS1_PIN 69
#define Y_MS2_PIN 39
#define Z_STEP_PIN 35
#define Z_DIR_PIN 47
#define Z_ENABLE_PIN 27
#define Z_MS1_PIN 68
#define Z_MS2_PIN 67
#define E0_STEP_PIN 34
#define E0_DIR_PIN 43
#define E0_ENABLE_PIN 26
#define E0_MS1_PIN 65
#define E0_MS2_PIN 66
#define E1_STEP_PIN 33
#define E1_DIR_PIN 42
#define E1_ENABLE_PIN 25
#define E1_MS1_PIN 63
#define E1_MS2_PIN 64
#define DIGIPOTSS_PIN 38
#define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping
//
// Temperature Sensors
//
#define TEMP_0_PIN 0
#define TEMP_1_PIN 1
#define TEMP_BED_PIN 2
//
// Heaters / Fans
//
#define HEATER_0_PIN 9
#define HEATER_1_PIN 7
#define HEATER_2_PIN 6
#define HEATER_BED_PIN 3
#define FAN_PIN 8
#define FAN1_PIN 6
#define FAN2_PIN 2
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
#define FAN_PIN 8
#define FILWIDTH_PIN 3 // ANALOG NUMBERING
/**********************************************************
Fan Pins
Fan_0 8
Fan_1 6
Fan_2 2
***********************************************************/
#define PS_ON_PIN 4
#define PS_ON_PIN 4
#if ENABLED(ULTRA_LCD)

47
Marlin/pins_RAMPS.h
Unescape Escape View File

@ -54,6 +54,9 @@
#define LARGE_FLASH true
//
// Servos
//
#ifdef IS_RAMPS_13
#define SERVO0_PIN 7 // RAMPS_13 // Will conflict with BTN_EN2 on LCD_I2C_VIKI
#else
@ -63,6 +66,9 @@
#define SERVO2_PIN 5
#define SERVO3_PIN 4
//
// Limit Switches
//
#define X_MIN_PIN 3
#ifndef X_MAX_PIN
#define X_MAX_PIN 2
@ -71,10 +77,17 @@
#define Y_MAX_PIN 15
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 32
#endif
//
// Steppers
//
#define X_STEP_PIN 54
#define X_DIR_PIN 55
#define X_ENABLE_PIN 38
@ -95,6 +108,16 @@
#define E1_DIR_PIN 34
#define E1_ENABLE_PIN 30
//
// Temperature Sensors
//
#define TEMP_0_PIN 13 // ANALOG NUMBERING
#define TEMP_1_PIN 15 // ANALOG NUMBERING
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
@ -105,15 +128,11 @@
#define FIL_RUNOUT_PIN 4
#define PS_ON_PIN 12
#define TEMP_0_PIN 13 // ANALOG NUMBERING
#define TEMP_1_PIN 15 // ANALOG NUMBERING
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
#if ENABLED(Z_PROBE_SLED)
#define SLED_PIN -1
#endif
#define SLED_PIN -1
//
// Augmentation for auto-assigning RAMPS plugs
//
#if DISABLED(IS_RAMPS_EEB) && DISABLED(IS_RAMPS_EEF) && DISABLED(IS_RAMPS_EFB) && DISABLED(IS_RAMPS_EFF) && DISABLED(IS_RAMPS_SF) && !PIN_EXISTS(MOSFET_D)
#if HOTENDS > 1
#if TEMP_SENSOR_BED
@ -128,10 +147,9 @@
#endif
#endif
/**
* Hi Voltage PWM Pin Assignments
*/
//
// Heaters / Fans
//
#ifndef MOSFET_D_PIN
#define MOSFET_D_PIN -1
#endif
@ -175,10 +193,9 @@
#define FAN_PIN 4 // IO pin. Buffer needed
#endif
/**
* LCD Controller Pin Assignments
*/
//
// LCD / Controller
//
#if ENABLED(ULTRA_LCD)
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)

55
Marlin/pins_RAMPS_OLD.h
Unescape Escape View File

@ -33,45 +33,68 @@
// Uncomment the following line for RAMPS v1.0
//#define RAMPS_V_1_0
//
// Limit Switches
//
#define X_MIN_PIN 3
#define X_MAX_PIN 2
#define Y_MIN_PIN 16
#define Y_MAX_PIN 17
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 19
#endif
//
// Steppers
//
#define X_STEP_PIN 26
#define X_DIR_PIN 28
#define X_ENABLE_PIN 24
#define X_MIN_PIN 3
#define X_MAX_PIN 2
#define Y_STEP_PIN 38
#define Y_DIR_PIN 40
#define Y_ENABLE_PIN 36
#define Y_MIN_PIN 16
#define Y_MAX_PIN 17
#define Z_STEP_PIN 44
#define Z_DIR_PIN 46
#define Z_ENABLE_PIN 42
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
#define E0_STEP_PIN 32
#define E0_DIR_PIN 34
#define E0_ENABLE_PIN 30
//
// Misc. Functions
//
#define SDPOWER 48
#define SDSS 53
#define LED_PIN 13
#if ENABLED(RAMPS_V_1_0) // RAMPS_V_1_0
#define HEATER_0_PIN 12 // RAMPS 1.0
#define HEATER_BED_PIN -1 // RAMPS 1.0
#define FAN_PIN 11 // RAMPS 1.0
#else // RAMPS_V_1_1 or RAMPS_V_1_2
#define HEATER_0_PIN 10 // RAMPS 1.1
#define HEATER_BED_PIN 8 // RAMPS 1.1
#define FAN_PIN 9 // RAMPS 1.1
#endif
//
// Temperature Sensors
//
#define TEMP_0_PIN 2 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
//
// Heaters / Fans
//
#if ENABLED(RAMPS_V_1_0)
#define HEATER_0_PIN 12
#define HEATER_BED_PIN -1
#define FAN_PIN 11
#else // RAMPS_V_1_1 or RAMPS_V_1_2
#define HEATER_0_PIN 10
#define HEATER_BED_PIN 8
#define FAN_PIN 9
#endif
// SPI for Max6675 or Max31855 Thermocouple
#if DISABLED(SDSUPPORT)
#define MAX6675_SS 66// Do not use pin 53 if there is even the remote possibility of using Display/SD card

60
Marlin/pins_RUMBA.h
Unescape Escape View File

@ -35,27 +35,37 @@
#define DEFAULT_MACHINE_NAME "Rumba"
#define BOARD_NAME "Rumba"
//
// Limit Switches
//
#define X_MIN_PIN 37
#define X_MAX_PIN 36
#define Y_MIN_PIN 35
#define Y_MAX_PIN 34
#define Z_MIN_PIN 33
#define Z_MAX_PIN 32
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 32
#endif
//
// Steppers
//
#define X_STEP_PIN 17
#define X_DIR_PIN 16
#define X_ENABLE_PIN 48
#define X_MIN_PIN 37
#define X_MAX_PIN 36
#define Y_STEP_PIN 54
#define Y_DIR_PIN 47
#define Y_ENABLE_PIN 55
#define Y_MIN_PIN 35
#define Y_MAX_PIN 34
#define Z_STEP_PIN 57
#define Z_DIR_PIN 56
#define Z_ENABLE_PIN 62
#define Z_MIN_PIN 33
#define Z_MAX_PIN 32
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 33
#endif
#define E0_STEP_PIN 23
#define E0_DIR_PIN 22
@ -69,18 +79,17 @@
#define E2_DIR_PIN 28
#define E2_ENABLE_PIN 39
//
// Misc. Functions
//
#define LED_PIN 13
#define FAN_PIN 7
#define FAN1_PIN 8
#define PS_ON_PIN 45
#define KILL_PIN 46
#define HEATER_0_PIN 2 // EXTRUDER 1
#define HEATER_1_PIN 3 // EXTRUDER 2
#define HEATER_2_PIN 6 // EXTRUDER 3
//
// Temperature Sensors
//
#if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 6 // ANALOG NUMBERING - connector *K1* on RUMBA thermocouple ADD ON is used
#else
@ -99,10 +108,21 @@
#define TEMP_2_PIN 13 // ANALOG NUMBERING - default connector for thermistor *T2* on rumba board is used
#endif
//optional for extruder 4 or chamber: #define TEMP_X_PIN 12 // ANALOG NUMBERING - default connector for thermistor *T3* on rumba board is used
//optional FAN1 can be used as 4th heater output: #define HEATER_3_PIN 8 // EXTRUDER 4
//
// Heaters / Fans
//
#define HEATER_0_PIN 2
#define HEATER_1_PIN 3
#define HEATER_2_PIN 6
#define HEATER_3_PIN 8
#define HEATER_BED_PIN 9
#define FAN_PIN 7
#define FAN1_PIN 8
//optional for extruder 4 or chamber:
// #define TEMP_X_PIN 12 // ANALOG NUMBERING - default connector for thermistor *T3* on rumba board is used
#define HEATER_BED_PIN 9 // BED
#if TEMP_SENSOR_BED == -1
#define TEMP_BED_PIN 7 // ANALOG NUMBERING - connector *K3* on RUMBA thermocouple ADD ON is used <-- this can not be used when TEMP_SENSOR_2 is defined as thermocouple
#else

79
Marlin/pins_SETHI.h
Unescape Escape View File

@ -34,53 +34,62 @@
#define GEN7_VERSION 12 // v1.x
#endif
//x axis pins
#define X_STEP_PIN 19
#define X_DIR_PIN 18
#define X_ENABLE_PIN 24
#define X_STOP_PIN 2
//y axis pins
#define Y_STEP_PIN 23
#define Y_DIR_PIN 22
#define Y_ENABLE_PIN 24
#define Y_STOP_PIN 0
//z axis pins
#define Z_STEP_PIN 26
#define Z_DIR_PIN 25
#define Z_ENABLE_PIN 24
#define Z_MIN_PIN 1
#define Z_MAX_PIN 0
//extruder pins
#define E0_STEP_PIN 28
#define E0_DIR_PIN 27
#define E0_ENABLE_PIN 24
#define TEMP_0_PIN 1
#define TEMP_BED_PIN 2
#define HEATER_0_PIN 4
#define HEATER_BED_PIN 3
//
// Limit Switches
//
#define X_STOP_PIN 2
#define Y_STOP_PIN 0
#define Z_MIN_PIN 1
#define Z_MAX_PIN 0
//
// Steppers
//
#define X_STEP_PIN 19
#define X_DIR_PIN 18
#define X_ENABLE_PIN 24
#define Y_STEP_PIN 23
#define Y_DIR_PIN 22
#define Y_ENABLE_PIN 24
#define Z_STEP_PIN 26
#define Z_DIR_PIN 25
#define Z_ENABLE_PIN 24
#define E0_STEP_PIN 28
#define E0_DIR_PIN 27
#define E0_ENABLE_PIN 24
//
// Temperature Sensors
//
#define TEMP_0_PIN 1
#define TEMP_BED_PIN 2
//
// Heaters / Fans
//
#define HEATER_0_PIN 4
#define HEATER_BED_PIN 3
#if (GEN7_VERSION >= 13)
// Gen7 v1.3 removed the fan pin
#define FAN_PIN -1
#define FAN_PIN -1
#else
#define FAN_PIN 31
#define FAN_PIN 31
#endif
#define PS_ON_PIN 15
#define PS_ON_PIN 15
//All these generations of Gen7 supply thermistor power
//via PS_ON, so ignore bad thermistor readings
#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
//our pin for debugging.
#define DEBUG_PIN 0
#define DEBUG_PIN 0
//our RS485 pins
#define TX_ENABLE_PIN 12
#define RX_ENABLE_PIN 13
#define TX_ENABLE_PIN 12
#define RX_ENABLE_PIN 13

114
Marlin/pins_ULTIMAIN_2.h
Unescape Escape View File

@ -32,43 +32,35 @@
#define DEFAULT_SOURCE_CODE_URL "https://github.com/Ultimaker/Marlin"
#define BOARD_NAME "Ultimaker 2.x"
#define X_STEP_PIN 25
#define X_DIR_PIN 23
#define X_STOP_PIN 22
#define X_ENABLE_PIN 27
#define Y_STEP_PIN 32
#define Y_DIR_PIN 33
#define Y_STOP_PIN 26
#define Y_ENABLE_PIN 31
#define Z_STEP_PIN 35
#define Z_DIR_PIN 36
#define Z_STOP_PIN 29
#define Z_ENABLE_PIN 34
#define HEATER_BED_PIN 4
#define TEMP_BED_PIN 10
#define HEATER_0_PIN 2
#define TEMP_0_PIN 8
#define HEATER_1_PIN 3
#define TEMP_1_PIN 9
#define E0_STEP_PIN 42
#define E0_DIR_PIN 43
#define E0_ENABLE_PIN 37
#define E1_STEP_PIN 49
#define E1_DIR_PIN 47
#define E1_ENABLE_PIN 48
#define SDSS 53
#define LED_PIN 8
#define FAN_PIN 7
#define SAFETY_TRIGGERED_PIN 28 //PIN to detect the safety circuit has triggered
#define MAIN_VOLTAGE_MEASURE_PIN 14 //Analogue PIN to measure the main voltage, with a 100k - 4k7 resitor divider.
//
// Limit Switches
//
#define X_STOP_PIN 22
#define Y_STOP_PIN 26
#define Z_STOP_PIN 29
//
// Steppers
//
#define X_STEP_PIN 25
#define X_DIR_PIN 23
#define X_ENABLE_PIN 27
#define Y_STEP_PIN 32
#define Y_DIR_PIN 33
#define Y_ENABLE_PIN 31
#define Z_STEP_PIN 35
#define Z_DIR_PIN 36
#define Z_ENABLE_PIN 34
#define E0_STEP_PIN 42
#define E0_DIR_PIN 43
#define E0_ENABLE_PIN 37
#define E1_STEP_PIN 49
#define E1_DIR_PIN 47
#define E1_ENABLE_PIN 48
#define MOTOR_CURRENT_PWM_XY_PIN 44
#define MOTOR_CURRENT_PWM_Z_PIN 45
@ -77,18 +69,42 @@
#define MOTOR_CURRENT_PWM_RANGE 2000
#define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250}
#define BEEPER_PIN 18
//
// Temperature Sensors
//
#define TEMP_0_PIN 8
#define TEMP_1_PIN 9
#define TEMP_BED_PIN 10
//
// Heaters / Fans
//
#define HEATER_0_PIN 2
#define HEATER_1_PIN 3
#define HEATER_BED_PIN 4
#define FAN_PIN 7
//
// SD Card
//
#define SDSS 53
#define SD_DETECT_PIN 39
#define LED_PIN 8
#define SAFETY_TRIGGERED_PIN 28 // PIN to detect the safety circuit has triggered
#define MAIN_VOLTAGE_MEASURE_PIN 14 // ANALOG PIN to measure the main voltage, with a 100k - 4k7 resitor divider.
#define LCD_PINS_RS 20
#define LCD_PINS_ENABLE 15
#define LCD_PINS_D4 14
#define LCD_PINS_D5 21
#define LCD_PINS_D6 5
#define LCD_PINS_D7 6
#define BEEPER_PIN 18
//buttons are directly attached
#define BTN_EN1 40
#define BTN_EN2 41
#define BTN_ENC 19
#define LCD_PINS_RS 20
#define LCD_PINS_ENABLE 15
#define LCD_PINS_D4 14
#define LCD_PINS_D5 21
#define LCD_PINS_D6 5
#define LCD_PINS_D7 6
#define SD_DETECT_PIN 39
// Buttons are directly attached
#define BTN_EN1 40
#define BTN_EN2 41
#define BTN_ENC 19

97
Marlin/pins_ULTIMAKER.h
Unescape Escape View File

@ -34,49 +34,74 @@
#define LARGE_FLASH true
#define SERVO0_PIN 13 // untested
#define X_STEP_PIN 25
#define X_DIR_PIN 23
#define X_MIN_PIN 22
#define X_MAX_PIN 24
#define X_ENABLE_PIN 27
#define Y_STEP_PIN 31
#define Y_DIR_PIN 33
#define Y_MIN_PIN 26
#define Y_MAX_PIN 28
#define Y_ENABLE_PIN 29
#define Z_STEP_PIN 37
#define Z_DIR_PIN 39
#define Z_MIN_PIN 30
#define Z_MAX_PIN 32
#define Z_ENABLE_PIN 35
#define HEATER_BED_PIN 4
#define TEMP_BED_PIN 10
#define HEATER_0_PIN 2
#define TEMP_0_PIN 8
#define HEATER_1_PIN 3
#define TEMP_1_PIN 9
#define E0_STEP_PIN 43
#define E0_DIR_PIN 45
#define E0_ENABLE_PIN 41
//
// Servos
//
#define SERVO0_PIN 13 // untested
//
// Limit Switches
//
#define X_MIN_PIN 22
#define X_MAX_PIN 24
#define Y_MIN_PIN 26
#define Y_MAX_PIN 28
#define Z_MIN_PIN 30
#define Z_MAX_PIN 32
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 32
#endif
#define E1_STEP_PIN 49
#define E1_DIR_PIN 47
#define E1_ENABLE_PIN 48
//
// Steppers
//
#define X_STEP_PIN 25
#define X_DIR_PIN 23
#define X_ENABLE_PIN 27
#define Y_STEP_PIN 31
#define Y_DIR_PIN 33
#define Y_ENABLE_PIN 29
#define Z_STEP_PIN 37
#define Z_DIR_PIN 39
#define Z_ENABLE_PIN 35
#define E0_STEP_PIN 43
#define E0_DIR_PIN 45
#define E0_ENABLE_PIN 41
#define E1_STEP_PIN 49
#define E1_DIR_PIN 47
#define E1_ENABLE_PIN 48
//
// Temperature Sensors
//
#define TEMP_0_PIN 8
#define TEMP_1_PIN 9
#define TEMP_BED_PIN 10
//
// Heaters / Fans
//
#define HEATER_0_PIN 2
#define HEATER_1_PIN 3
#define HEATER_BED_PIN 4
#define SDSS 53
#define LED_PIN 13
#define FAN_PIN 7
#define FAN_PIN 7
#define PS_ON_PIN 12
#define SUICIDE_PIN 54 //PIN that has to be turned on right after start, to keep power flowing.
//
// LCD / Controller
//
#if ENABLED(ULTRA_LCD)
#define BEEPER_PIN 18

85
Marlin/pins_ULTIMAKER_OLD.h
Unescape Escape View File

@ -34,41 +34,64 @@
#define LARGE_FLASH true
#define X_STEP_PIN 25
#define X_DIR_PIN 23
#define X_MIN_PIN 15
#define X_MAX_PIN 14
#define X_ENABLE_PIN 27
//
// Limit Switches
//
#define X_MIN_PIN 15
#define X_MAX_PIN 14
#define Y_MIN_PIN 17
#define Y_MAX_PIN 16
#define Z_MIN_PIN 19
#define Z_MAX_PIN 18
#define Y_STEP_PIN 31
#define Y_DIR_PIN 33
#define Y_MIN_PIN 17
#define Y_MAX_PIN 16
#define Y_ENABLE_PIN 29
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 18
#endif
//
// Steppers
//
#define X_STEP_PIN 25
#define X_DIR_PIN 23
#define X_ENABLE_PIN 27
#define Y_STEP_PIN 31
#define Y_DIR_PIN 33
#define Y_ENABLE_PIN 29
#define Z_STEP_PIN 37
#define Z_DIR_PIN 39
#define Z_MIN_PIN 19
#define Z_MAX_PIN 18
#define Z_ENABLE_PIN 35
#define Z_STEP_PIN 37
#define Z_DIR_PIN 39
#define Z_ENABLE_PIN 35
#define TEMP_0_PIN 8
#define TEMP_1_PIN 1
#define E0_STEP_PIN 43
#define E0_DIR_PIN 45
#define E0_ENABLE_PIN 41
#define HEATER_0_PIN 2
#define HEATER_1_PIN 1
#define E1_STEP_PIN -1
#define E1_DIR_PIN -1
#define E1_ENABLE_PIN -1
#define E0_STEP_PIN 43
#define E0_DIR_PIN 45
#define E0_ENABLE_PIN 41
//
// Temperature Sensors
//
#define TEMP_0_PIN 8
#define TEMP_1_PIN 1
#define E1_STEP_PIN -1
#define E1_DIR_PIN -1
#define E1_ENABLE_PIN -1
//
// Heaters / Fans
//
#define HEATER_0_PIN 2
#define HEATER_1_PIN 1
#define LCD_PINS_RS 24
#define LCD_PINS_ENABLE 22
#define LCD_PINS_D4 36
#define LCD_PINS_D5 34
#define LCD_PINS_D6 32
#define LCD_PINS_D7 30
//
// LCD / Controller
//
#define LCD_PINS_RS 24
#define LCD_PINS_ENABLE 22
#define LCD_PINS_D4 36
#define LCD_PINS_D5 34
#define LCD_PINS_D6 32
#define LCD_PINS_D7 30

Write Preview
Loading…
Cancel
Save