microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

Reduce string storage required for DEBUG_LEVELING

Browse Source
2.0.x
Scott Lahteine 9 years ago
parent 1af5d7b35f
commit 98f2e9fc83
1 changed files with 47 additions and 116 deletions
Show Stats Download Patch File Download Diff File

163
Marlin/Marlin_main.cpp
Unescape Escape View File

@ -1164,6 +1164,7 @@ XYZ_CONSTS_FROM_CONFIG(signed char, home_dir, HOME_DIR);
void print_xyz(const char* prefix, const float xyz[]) {
print_xyz(prefix, xyz[X_AXIS], xyz[Y_AXIS], xyz[Z_AXIS]);
}
#define DEBUG_POS(PREFIX,VAR) do{ SERIAL_ECHOPGM(PREFIX); print_xyz(" > " STRINGIFY(VAR), VAR); }while(0)
#endif
static void set_axis_is_at_home(AxisEnum axis) {
@ -1251,7 +1252,7 @@ static void set_axis_is_at_home(AxisEnum axis) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("> home_offset[axis]==", home_offset[axis]);
print_xyz(" > current_position", current_position);
DEBUG_POS("", current_position);
}
#endif
}
@ -1306,9 +1307,7 @@ static void setup_for_endstop_move() {
feedrate_multiplier = 100;
refresh_cmd_timeout();
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("setup_for_endstop_move > enable_endstops(true)");
}
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("setup_for_endstop_move > enable_endstops(true)");
#endif
enable_endstops(true);
}
@ -1321,9 +1320,7 @@ static void setup_for_endstop_move() {
*/
void prepare_move_raw() {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
print_xyz("prepare_move_raw > destination", destination);
}
if (DEBUGGING(LEVELING)) DEBUG_POS("prepare_move_raw", destination);
#endif
refresh_cmd_timeout();
calculate_delta(destination);
@ -1353,9 +1350,7 @@ static void setup_for_endstop_move() {
current_position[Z_AXIS] = corrected_position.z;
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
print_xyz("set_bed_level_equation_lsq > current_position", current_position);
}
if (DEBUGGING(LEVELING)) DEBUG_POS("set_bed_level_equation_lsq", current_position);
#endif
sync_plan_position();
@ -1388,9 +1383,7 @@ static void setup_for_endstop_move() {
current_position[Z_AXIS] = corrected_position.z;
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
print_xyz("set_bed_level_equation_3pts > current_position", current_position);
}
if (DEBUGGING(LEVELING)) DEBUG_POS("set_bed_level_equation_3pts", current_position);
#endif
sync_plan_position();
@ -1412,9 +1405,7 @@ static void setup_for_endstop_move() {
long start_steps = st_get_position(Z_AXIS);
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("run_z_probe (DELTA) 1");
}
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("run_z_probe (DELTA) 1");
#endif
// move down slowly until you find the bed
@ -1433,9 +1424,7 @@ static void setup_for_endstop_move() {
current_position[Z_AXIS] = mm;
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
print_xyz("run_z_probe (DELTA) 2 > current_position", current_position);
}
if (DEBUGGING(LEVELING)) DEBUG_POS("run_z_probe (DELTA) 2", current_position);
#endif
sync_plan_position_delta();
@ -1476,9 +1465,7 @@ static void setup_for_endstop_move() {
sync_plan_position();
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
print_xyz("run_z_probe > current_position", current_position);
}
if (DEBUGGING(LEVELING)) DEBUG_POS("run_z_probe", current_position);
#endif
#endif // !DELTA
@ -1492,9 +1479,7 @@ static void setup_for_endstop_move() {
float oldFeedRate = feedrate;
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
print_xyz("do_blocking_move_to", x, y, z);
}
if (DEBUGGING(LEVELING)) print_xyz("do_blocking_move_to", x, y, z);
#endif
#if ENABLED(DELTA)
@ -1545,9 +1530,7 @@ static void setup_for_endstop_move() {
static void clean_up_after_endstop_move() {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("clean_up_after_endstop_move > ENDSTOPS_ONLY_FOR_HOMING > endstops_not_homing()");
}
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("clean_up_after_endstop_move > ENDSTOPS_ONLY_FOR_HOMING > endstops_not_homing()");
#endif
endstops_not_homing();
feedrate = saved_feedrate;
@ -1560,9 +1543,7 @@ static void setup_for_endstop_move() {
static void deploy_z_probe() {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
print_xyz("deploy_z_probe > current_position", current_position);
}
if (DEBUGGING(LEVELING)) DEBUG_POS("deploy_z_probe", current_position);
#endif
if (z_probe_is_active) return;
@ -1658,9 +1639,7 @@ static void setup_for_endstop_move() {
UNUSED(doRaise);
#endif
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
print_xyz("stow_z_probe > current_position", current_position);
}
if (DEBUGGING(LEVELING)) DEBUG_POS("stow_z_probe", current_position);
#endif
if (!z_probe_is_active) return;
@ -1772,7 +1751,7 @@ static void setup_for_endstop_move() {
SERIAL_ECHOLNPGM("probe_pt >>>");
SERIAL_ECHOPAIR("> ProbeAction:", (unsigned long)probe_action);
SERIAL_EOL;
print_xyz("> current_position", current_position);
DEBUG_POS("", current_position);
}
#endif
@ -1802,9 +1781,7 @@ static void setup_for_endstop_move() {
#if DISABLED(Z_PROBE_SLED) && DISABLED(Z_PROBE_ALLEN_KEY)
if (probe_action & ProbeDeploy) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("> ProbeDeploy");
}
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("> ProbeDeploy");
#endif
deploy_z_probe();
}
@ -1816,9 +1793,7 @@ static void setup_for_endstop_move() {
#if DISABLED(Z_PROBE_SLED) && DISABLED(Z_PROBE_ALLEN_KEY)
if (probe_action & ProbeStow) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("> ProbeStow (stow_z_probe will do Z Raise)");
}
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("> ProbeStow (stow_z_probe will do Z Raise)");
#endif
stow_z_probe();
}
@ -1835,9 +1810,7 @@ static void setup_for_endstop_move() {
}
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("<<< probe_pt");
}
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("<<< probe_pt");
#endif
return measured_z;
@ -1902,9 +1875,7 @@ static void setup_for_endstop_move() {
*/
void reset_bed_level() {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("reset_bed_level");
}
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("reset_bed_level");
#endif
for (int y = 0; y < AUTO_BED_LEVELING_GRID_POINTS; y++) {
for (int x = 0; x < AUTO_BED_LEVELING_GRID_POINTS; x++) {
@ -1954,8 +1925,8 @@ static void setup_for_endstop_move() {
static void dock_sled(bool dock, int offset = 0) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("dock_sled", dock);
SERIAL_EOL;
SERIAL_ECHOPAIR("dock_sled(", dock);
SERIAL_ECHOLNPGM(")");
}
#endif
@ -2000,8 +1971,7 @@ static void homeaxis(AxisEnum axis) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR(">>> homeaxis(", (unsigned long)axis);
SERIAL_CHAR(')');
SERIAL_EOL;
SERIAL_ECHOLNPGM(")");
}
#endif
#define HOMEAXIS_DO(LETTER) \
@ -2066,9 +2036,7 @@ static void homeaxis(AxisEnum axis) {
sync_plan_position();
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("> enable_endstops(false)");
}
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("> enable_endstops(false)");
#endif
enable_endstops(false); // Disable endstops while moving away
@ -2078,9 +2046,7 @@ static void homeaxis(AxisEnum axis) {
st_synchronize();
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("> enable_endstops(true)");
}
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("> enable_endstops(true)");
#endif
enable_endstops(true); // Enable endstops for next homing move
@ -2093,9 +2059,7 @@ static void homeaxis(AxisEnum axis) {
st_synchronize();
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
print_xyz("> TRIGGER ENDSTOP > current_position", current_position);
}
if (DEBUGGING(LEVELING)) DEBUG_POS("> TRIGGER ENDSTOP", current_position);
#endif
#if ENABLED(Z_DUAL_ENDSTOPS)
@ -2127,9 +2091,7 @@ static void homeaxis(AxisEnum axis) {
// retrace by the amount specified in endstop_adj
if (endstop_adj[axis] * axis_home_dir < 0) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("> enable_endstops(false)");
}
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("> enable_endstops(false)");
#endif
enable_endstops(false); // Disable endstops while moving away
sync_plan_position();
@ -2137,15 +2099,13 @@ static void homeaxis(AxisEnum axis) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("> endstop_adj = ", endstop_adj[axis]);
print_xyz(" > destination", destination);
DEBUG_POS("", destination);
}
#endif
line_to_destination();
st_synchronize();
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("> enable_endstops(true)");
}
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("> enable_endstops(true)");
#endif
enable_endstops(true); // Enable endstops for next homing move
}
@ -2164,9 +2124,7 @@ static void homeaxis(AxisEnum axis) {
sync_plan_position();
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
print_xyz("> AFTER set_axis_is_at_home > current_position", current_position);
}
if (DEBUGGING(LEVELING)) DEBUG_POS("> AFTER set_axis_is_at_home", current_position);
#endif
destination[axis] = current_position[axis];
@ -2179,9 +2137,7 @@ static void homeaxis(AxisEnum axis) {
#if ENABLED(Z_PROBE_SLED) || SERVO_LEVELING || ENABLED(FIX_MOUNTED_PROBE)
if (axis == Z_AXIS && axis_home_dir < 0) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("> SERVO_LEVELING > " STRINGIFY(_Z_STOW));
}
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("> SERVO_LEVELING > " STRINGIFY(_Z_STOW));
#endif
_Z_STOW;
}
@ -2191,9 +2147,7 @@ static void homeaxis(AxisEnum axis) {
#if HAS_SERVO_ENDSTOPS
if (_Z_SERVO_TEST && servo_endstop_id[axis] >= 0) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("> SERVO_ENDSTOPS > Stow with servo.move()");
}
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("> SERVO_ENDSTOPS > Stow with servo.move()");
#endif
servo[servo_endstop_id[axis]].move(servo_endstop_angle[axis][1]);
if (_Z_PROBE_SUBTEST) z_probe_is_active = false;
@ -2205,8 +2159,7 @@ static void homeaxis(AxisEnum axis) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("<<< homeaxis(", (unsigned long)axis);
SERIAL_CHAR(')');
SERIAL_EOL;
SERIAL_ECHOLNPGM(")");
}
#endif
}
@ -2444,9 +2397,7 @@ inline void gcode_G4() {
inline void gcode_G28() {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("gcode_G28 >>>");
}
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("gcode_G28 >>>");
#endif
// Wait for planner moves to finish!
@ -2507,9 +2458,7 @@ inline void gcode_G28() {
sync_plan_position_delta();
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
print_xyz("(DELTA) > current_position", current_position);
}
if (DEBUGGING(LEVELING)) DEBUG_POS("(DELTA)", current_position);
#endif
#else // NOT DELTA
@ -2525,9 +2474,7 @@ inline void gcode_G28() {
if (home_all_axis || homeZ) {
HOMEAXIS(Z);
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
print_xyz("> HOMEAXIS(Z) > current_position", current_position);
}
if (DEBUGGING(LEVELING)) DEBUG_POS("> HOMEAXIS(Z)", current_position);
#endif
}
@ -2541,8 +2488,8 @@ inline void gcode_G28() {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("Raise Z (before homing) to ", (float)(MIN_Z_HEIGHT_FOR_HOMING));
SERIAL_EOL;
print_xyz("> (home_all_axis || homeZ) > current_position", current_position);
print_xyz("> (home_all_axis || homeZ) > destination", destination);
DEBUG_POS("> (home_all_axis || homeZ)", current_position);
DEBUG_POS("> (home_all_axis || homeZ)", destination);
}
#endif
line_to_destination();
@ -2586,9 +2533,7 @@ inline void gcode_G28() {
sync_plan_position();
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
print_xyz("> QUICK_HOME > current_position 1", current_position);
}
if (DEBUGGING(LEVELING)) DEBUG_POS("> QUICK_HOME 1", current_position);
#endif
destination[X_AXIS] = current_position[X_AXIS];
@ -2605,9 +2550,7 @@ inline void gcode_G28() {
#endif
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
print_xyz("> QUICK_HOME > current_position 2", current_position);
}
if (DEBUGGING(LEVELING)) DEBUG_POS("> QUICK_HOME 2", current_position);
#endif
}
@ -2636,9 +2579,7 @@ inline void gcode_G28() {
HOMEAXIS(X);
#endif
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
print_xyz("> homeX", current_position);
}
if (DEBUGGING(LEVELING)) DEBUG_POS("> homeX", current_position);
#endif
}
@ -2647,9 +2588,7 @@ inline void gcode_G28() {
if (home_all_axis || homeY) {
HOMEAXIS(Y);
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
print_xyz("> homeY", current_position);
}
if (DEBUGGING(LEVELING)) DEBUG_POS("> homeY", current_position);
#endif
}
#endif
@ -2688,8 +2627,8 @@ inline void gcode_G28() {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
print_xyz("> Z_SAFE_HOMING > home_all_axis > current_position", current_position);
print_xyz("> Z_SAFE_HOMING > home_all_axis > destination", destination);
DEBUG_POS("> Z_SAFE_HOMING > home_all_axis", current_position);
DEBUG_POS("> Z_SAFE_HOMING > home_all_axis", destination);
}
#endif
@ -2752,9 +2691,7 @@ inline void gcode_G28() {
#endif // !Z_SAFE_HOMING
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
print_xyz("> (home_all_axis || homeZ) > final", current_position);
}
if (DEBUGGING(LEVELING)) DEBUG_POS("> (home_all_axis || homeZ) > final", current_position);
#endif
} // home_all_axis || homeZ
@ -2790,9 +2727,7 @@ inline void gcode_G28() {
line_to_destination();
st_synchronize();
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
print_xyz("mbl_was_active > current_position", current_position);
}
if (DEBUGGING(LEVELING)) DEBUG_POS("mbl_was_active", current_position);
#endif
}
#endif
@ -3015,7 +2950,7 @@ inline void gcode_G28() {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("gcode_G29 >>>");
print_xyz("> current_position", current_position);
DEBUG_POS("", current_position);
}
#endif
@ -3234,9 +3169,7 @@ inline void gcode_G28() {
} //yProbe
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
print_xyz("> probing complete > current_position", current_position);
}
if (DEBUGGING(LEVELING)) DEBUG_POS("> probing complete", current_position);
#endif
clean_up_after_endstop_move();
@ -3433,9 +3366,7 @@ inline void gcode_G28() {
sync_plan_position();
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
print_xyz("> corrected Z in G29", current_position);
}
if (DEBUGGING(LEVELING)) DEBUG_POS("> corrected Z in G29", current_position);
#endif
}

Write Preview
Loading…
Cancel
Save