Merge pull request #4486 from thinkyhead/rc_pid_add_extrusion_rate_off

PID_EXTRUSION_SCALING, disabled by default
9 years ago · 6eed37aafb
parent 4bf3526d00 63fd1f49a6
commit 6eed37aafb
25 changed files with 65 additions and 63 deletions
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@ -113,8 +113,8 @@
 #if ENABLED(PIDTEMP)
  // this adds an experimental additional term to the heating power, proportional to the extrusion speed.
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
-  #define PID_ADD_EXTRUSION_RATE
-  #if ENABLED(PID_ADD_EXTRUSION_RATE)
+  //#define PID_EXTRUSION_SCALING
+  #if ENABLED(PID_EXTRUSION_SCALING)
    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
    #define LPQ_MAX_LEN 50
  #endif
--- a/Marlin/Marlin.h
+++ b/Marlin/Marlin.h
@ -352,7 +352,7 @@ float code_value_temp_diff();
  extern FilamentChangeMenuResponse filament_change_menu_response;
 #endif

-#if ENABLED(PID_ADD_EXTRUSION_RATE)
+#if ENABLED(PID_EXTRUSION_SCALING)
  extern int lpq_len;
 #endif

--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@ -531,7 +531,7 @@ static bool send_ok[BUFSIZE];
  boolean chdkActive = false;
 #endif

-#if ENABLED(PID_ADD_EXTRUSION_RATE)
+#if ENABLED(PID_EXTRUSION_SCALING)
  int lpq_len = 20;
 #endif

@ -5671,7 +5671,7 @@ inline void gcode_M226() {
   *   I[float] Ki term (unscaled)
   *   D[float] Kd term (unscaled)
   *
-   * With PID_ADD_EXTRUSION_RATE:
+   * With PID_EXTRUSION_SCALING:
   *
   *   C[float] Kc term
   *   L[float] LPQ length
@ -5686,7 +5686,7 @@ inline void gcode_M226() {
      if (code_seen('P')) PID_PARAM(Kp, e) = code_value_float();
      if (code_seen('I')) PID_PARAM(Ki, e) = scalePID_i(code_value_float());
      if (code_seen('D')) PID_PARAM(Kd, e) = scalePID_d(code_value_float());
-      #if ENABLED(PID_ADD_EXTRUSION_RATE)
+      #if ENABLED(PID_EXTRUSION_SCALING)
        if (code_seen('C')) PID_PARAM(Kc, e) = code_value_float();
        if (code_seen('L')) lpq_len = code_value_float();
        NOMORE(lpq_len, LPQ_MAX_LEN);
@ -5704,7 +5704,7 @@ inline void gcode_M226() {
      SERIAL_ECHO(unscalePID_i(PID_PARAM(Ki, e)));
      SERIAL_ECHOPGM(" d:");
      SERIAL_ECHO(unscalePID_d(PID_PARAM(Kd, e)));
-      #if ENABLED(PID_ADD_EXTRUSION_RATE)
+      #if ENABLED(PID_EXTRUSION_SCALING)
        SERIAL_ECHOPGM(" c:");
        //Kc does not have scaling applied above, or in resetting defaults
        SERIAL_ECHO(PID_PARAM(Kc, e));
--- a/Marlin/SanityCheck.h
+++ b/Marlin/SanityCheck.h
@ -730,4 +730,6 @@
  #error "HOMING_FEEDRATE is deprecated. Set individual rates with HOMING_FEEDRATE_(XY|Z|E) instead."
 #elif defined(MANUAL_HOME_POSITIONS)
  #error "MANUAL_HOME_POSITIONS is deprecated. Set MANUAL_[XYZ]_HOME_POS as-needed instead."
+#elif defined(PID_ADD_EXTRUSION_RATE)
+  #error "PID_ADD_EXTRUSION_RATE is now PID_EXTRUSION_SCALING and is DISABLED by default. Are you sure you want to use this option? Please update your configuration."
 #endif
--- a/Marlin/configuration_store.cpp
+++ b/Marlin/configuration_store.cpp
@ -290,7 +290,7 @@ void Config_StoreSettings()  {
        EEPROM_WRITE(PID_PARAM(Kp, e));
        EEPROM_WRITE(PID_PARAM(Ki, e));
        EEPROM_WRITE(PID_PARAM(Kd, e));
-        #if ENABLED(PID_ADD_EXTRUSION_RATE)
+        #if ENABLED(PID_EXTRUSION_SCALING)
          EEPROM_WRITE(PID_PARAM(Kc, e));
        #else
          dummy = 1.0f; // 1.0 = default kc
@ -308,7 +308,7 @@ void Config_StoreSettings()  {

  } // Hotends Loop

-  #if DISABLED(PID_ADD_EXTRUSION_RATE)
+  #if DISABLED(PID_EXTRUSION_SCALING)
    int lpq_len = 20;
  #endif
  EEPROM_WRITE(lpq_len);
@ -481,7 +481,7 @@ void Config_RetrieveSettings() {
          PID_PARAM(Kp, e) = dummy;
          EEPROM_READ(PID_PARAM(Ki, e));
          EEPROM_READ(PID_PARAM(Kd, e));
-          #if ENABLED(PID_ADD_EXTRUSION_RATE)
+          #if ENABLED(PID_EXTRUSION_SCALING)
            EEPROM_READ(PID_PARAM(Kc, e));
          #else
            EEPROM_READ(dummy);
@ -496,7 +496,7 @@ void Config_RetrieveSettings() {
      for (uint8_t q = MAX_EXTRUDERS * 4; q--;) EEPROM_READ(dummy);  // Kp, Ki, Kd, Kc
    #endif // !PIDTEMP

-    #if DISABLED(PID_ADD_EXTRUSION_RATE)
+    #if DISABLED(PID_EXTRUSION_SCALING)
      int lpq_len;
    #endif
    EEPROM_READ(lpq_len);
@ -641,11 +641,11 @@ void Config_ResetDefault() {
      PID_PARAM(Kp, e) = DEFAULT_Kp;
      PID_PARAM(Ki, e) = scalePID_i(DEFAULT_Ki);
      PID_PARAM(Kd, e) = scalePID_d(DEFAULT_Kd);
-      #if ENABLED(PID_ADD_EXTRUSION_RATE)
+      #if ENABLED(PID_EXTRUSION_SCALING)
        PID_PARAM(Kc, e) = DEFAULT_Kc;
      #endif
    }
-    #if ENABLED(PID_ADD_EXTRUSION_RATE)
+    #if ENABLED(PID_EXTRUSION_SCALING)
      lpq_len = 20; // default last-position-queue size
    #endif
  #endif // PIDTEMP
@ -863,7 +863,7 @@ void Config_PrintSettings(bool forReplay) {
            SERIAL_ECHOPAIR(" P", PID_PARAM(Kp, e));
            SERIAL_ECHOPAIR(" I", unscalePID_i(PID_PARAM(Ki, e)));
            SERIAL_ECHOPAIR(" D", unscalePID_d(PID_PARAM(Kd, e)));
-            #if ENABLED(PID_ADD_EXTRUSION_RATE)
+            #if ENABLED(PID_EXTRUSION_SCALING)
              SERIAL_ECHOPAIR(" C", PID_PARAM(Kc, e));
              if (e == 0) SERIAL_ECHOPAIR(" L", lpq_len);
            #endif
@ -878,7 +878,7 @@ void Config_PrintSettings(bool forReplay) {
        SERIAL_ECHOPAIR("  M301 P", PID_PARAM(Kp, 0)); // for compatibility with hosts, only echo values for E0
        SERIAL_ECHOPAIR(" I", unscalePID_i(PID_PARAM(Ki, 0)));
        SERIAL_ECHOPAIR(" D", unscalePID_d(PID_PARAM(Kd, 0)));
-        #if ENABLED(PID_ADD_EXTRUSION_RATE)
+        #if ENABLED(PID_EXTRUSION_SCALING)
          SERIAL_ECHOPAIR(" C", PID_PARAM(Kc, 0));
          SERIAL_ECHOPAIR(" L", lpq_len);
        #endif
--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@ -113,8 +113,8 @@
 #if ENABLED(PIDTEMP)
  // this adds an experimental additional term to the heating power, proportional to the extrusion speed.
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
-  #define PID_ADD_EXTRUSION_RATE
-  #if ENABLED(PID_ADD_EXTRUSION_RATE)
+  //#define PID_EXTRUSION_SCALING
+  #if ENABLED(PID_EXTRUSION_SCALING)
    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
    #define LPQ_MAX_LEN 50
  #endif
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@ -113,8 +113,8 @@
 #if ENABLED(PIDTEMP)
  // this adds an experimental additional term to the heating power, proportional to the extrusion speed.
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
-  #define PID_ADD_EXTRUSION_RATE
-  #if ENABLED(PID_ADD_EXTRUSION_RATE)
+  //#define PID_EXTRUSION_SCALING
+  #if ENABLED(PID_EXTRUSION_SCALING)
    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
    #define LPQ_MAX_LEN 50
  #endif
--- a/Marlin/example_configurations/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h
@ -113,8 +113,8 @@
 #if ENABLED(PIDTEMP)
  // this adds an experimental additional term to the heating power, proportional to the extrusion speed.
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
-  #define PID_ADD_EXTRUSION_RATE
-  #if ENABLED(PID_ADD_EXTRUSION_RATE)
+  //#define PID_EXTRUSION_SCALING
+  #if ENABLED(PID_EXTRUSION_SCALING)
    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
    #define LPQ_MAX_LEN 50
  #endif
--- a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
@ -113,8 +113,8 @@
 #if ENABLED(PIDTEMP)
  // this adds an experimental additional term to the heating power, proportional to the extrusion speed.
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
-  #define PID_ADD_EXTRUSION_RATE
-  #if ENABLED(PID_ADD_EXTRUSION_RATE)
+  //#define PID_EXTRUSION_SCALING
+  #if ENABLED(PID_EXTRUSION_SCALING)
    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
    #define LPQ_MAX_LEN 50
  #endif
--- a/Marlin/example_configurations/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/K8200/Configuration_adv.h
@ -119,8 +119,8 @@
 #if ENABLED(PIDTEMP)
  // this adds an experimental additional term to the heating power, proportional to the extrusion speed.
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
-  #define PID_ADD_EXTRUSION_RATE
-  #if ENABLED(PID_ADD_EXTRUSION_RATE)
+  //#define PID_EXTRUSION_SCALING
+  #if ENABLED(PID_EXTRUSION_SCALING)
    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
    #define LPQ_MAX_LEN 50
  #endif
--- a/Marlin/example_configurations/K8400/Configuration_adv.h
+++ b/Marlin/example_configurations/K8400/Configuration_adv.h
@ -113,8 +113,8 @@
 #if ENABLED(PIDTEMP)
  // this adds an experimental additional term to the heating power, proportional to the extrusion speed.
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
-  #define PID_ADD_EXTRUSION_RATE
-  #if ENABLED(PID_ADD_EXTRUSION_RATE)
+  //#define PID_EXTRUSION_SCALING
+  #if ENABLED(PID_EXTRUSION_SCALING)
    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
    #define LPQ_MAX_LEN 50
  #endif
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@ -113,8 +113,8 @@
 #if ENABLED(PIDTEMP)
  // this adds an experimental additional term to the heating power, proportional to the extrusion speed.
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
-  #define PID_ADD_EXTRUSION_RATE
-  #if ENABLED(PID_ADD_EXTRUSION_RATE)
+  //#define PID_EXTRUSION_SCALING
+  #if ENABLED(PID_EXTRUSION_SCALING)
    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
    #define LPQ_MAX_LEN 50
  #endif
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@ -113,8 +113,8 @@
 #if ENABLED(PIDTEMP)
  // this adds an experimental additional term to the heating power, proportional to the extrusion speed.
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
-  #define PID_ADD_EXTRUSION_RATE
-  #if ENABLED(PID_ADD_EXTRUSION_RATE)
+  //#define PID_EXTRUSION_SCALING
+  #if ENABLED(PID_EXTRUSION_SCALING)
    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
    #define LPQ_MAX_LEN 50
  #endif
--- a/Marlin/example_configurations/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/TAZ4/Configuration_adv.h
@ -113,8 +113,8 @@
 #if ENABLED(PIDTEMP)
  // this adds an experimental additional term to the heating power, proportional to the extrusion speed.
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
-  #define PID_ADD_EXTRUSION_RATE
-  #if ENABLED(PID_ADD_EXTRUSION_RATE)
+  //#define PID_EXTRUSION_SCALING
+  #if ENABLED(PID_EXTRUSION_SCALING)
    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
    #define LPQ_MAX_LEN 50
  #endif
--- a/Marlin/example_configurations/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h
@ -113,8 +113,8 @@
 #if ENABLED(PIDTEMP)
  // this adds an experimental additional term to the heating power, proportional to the extrusion speed.
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
-  #define PID_ADD_EXTRUSION_RATE
-  #if ENABLED(PID_ADD_EXTRUSION_RATE)
+  //#define PID_EXTRUSION_SCALING
+  #if ENABLED(PID_EXTRUSION_SCALING)
    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
    #define LPQ_MAX_LEN 50
  #endif
--- a/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
@ -113,8 +113,8 @@
 #if ENABLED(PIDTEMP)
  // this adds an experimental additional term to the heating power, proportional to the extrusion speed.
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
-  #define PID_ADD_EXTRUSION_RATE
-  #if ENABLED(PID_ADD_EXTRUSION_RATE)
+  //#define PID_EXTRUSION_SCALING
+  #if ENABLED(PID_EXTRUSION_SCALING)
    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
    #define LPQ_MAX_LEN 50
  #endif
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@ -113,8 +113,8 @@
 #if ENABLED(PIDTEMP)
  // this adds an experimental additional term to the heating power, proportional to the extrusion speed.
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
-  #define PID_ADD_EXTRUSION_RATE
-  #if ENABLED(PID_ADD_EXTRUSION_RATE)
+  //#define PID_EXTRUSION_SCALING
+  #if ENABLED(PID_EXTRUSION_SCALING)
    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
    #define LPQ_MAX_LEN 50
  #endif
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@ -113,8 +113,8 @@
 #if ENABLED(PIDTEMP)
  // this adds an experimental additional term to the heating power, proportional to the extrusion speed.
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
-  #define PID_ADD_EXTRUSION_RATE
-  #if ENABLED(PID_ADD_EXTRUSION_RATE)
+  //#define PID_EXTRUSION_SCALING
+  #if ENABLED(PID_EXTRUSION_SCALING)
    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
    #define LPQ_MAX_LEN 50
  #endif
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@ -118,8 +118,8 @@
 #if ENABLED(PIDTEMP)
  // this adds an experimental additional term to the heating power, proportional to the extrusion speed.
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
-  #define PID_ADD_EXTRUSION_RATE
-  #if ENABLED(PID_ADD_EXTRUSION_RATE)
+  //#define PID_EXTRUSION_SCALING
+  #if ENABLED(PID_EXTRUSION_SCALING)
    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
    #define LPQ_MAX_LEN 50
  #endif
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@ -113,8 +113,8 @@
 #if ENABLED(PIDTEMP)
  // this adds an experimental additional term to the heating power, proportional to the extrusion speed.
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
-  #define PID_ADD_EXTRUSION_RATE
-  #if ENABLED(PID_ADD_EXTRUSION_RATE)
+  //#define PID_EXTRUSION_SCALING
+  #if ENABLED(PID_EXTRUSION_SCALING)
    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
    #define LPQ_MAX_LEN 50
  #endif
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@ -113,8 +113,8 @@
 #if ENABLED(PIDTEMP)
  // this adds an experimental additional term to the heating power, proportional to the extrusion speed.
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
-  #define PID_ADD_EXTRUSION_RATE
-  #if ENABLED(PID_ADD_EXTRUSION_RATE)
+  //#define PID_EXTRUSION_SCALING
+  #if ENABLED(PID_EXTRUSION_SCALING)
    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
    #define LPQ_MAX_LEN 50
  #endif
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@ -113,8 +113,8 @@
 #if ENABLED(PIDTEMP)
  // this adds an experimental additional term to the heating power, proportional to the extrusion speed.
  // if Kc is chosen well, the additional required power due to increased melting should be compensated.
-  #define PID_ADD_EXTRUSION_RATE
-  #if ENABLED(PID_ADD_EXTRUSION_RATE)
+  //#define PID_EXTRUSION_SCALING
+  #if ENABLED(PID_EXTRUSION_SCALING)
    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
    #define LPQ_MAX_LEN 50
  #endif
--- a/Marlin/temperature.cpp
+++ b/Marlin/temperature.cpp
@ -72,14 +72,14 @@ unsigned char Temperature::soft_pwm_bed;
    float Temperature::Kp[HOTENDS] = ARRAY_BY_HOTENDS1(DEFAULT_Kp),
          Temperature::Ki[HOTENDS] = ARRAY_BY_HOTENDS1((DEFAULT_Ki) * (PID_dT)),
          Temperature::Kd[HOTENDS] = ARRAY_BY_HOTENDS1((DEFAULT_Kd) / (PID_dT));
-    #if ENABLED(PID_ADD_EXTRUSION_RATE)
+    #if ENABLED(PID_EXTRUSION_SCALING)
      float Temperature::Kc[HOTENDS] = ARRAY_BY_HOTENDS1(DEFAULT_Kc);
    #endif
  #else
    float Temperature::Kp = DEFAULT_Kp,
          Temperature::Ki = (DEFAULT_Ki) * (PID_dT),
          Temperature::Kd = (DEFAULT_Kd) / (PID_dT);
-    #if ENABLED(PID_ADD_EXTRUSION_RATE)
+    #if ENABLED(PID_EXTRUSION_SCALING)
      float Temperature::Kc = DEFAULT_Kc;
    #endif
  #endif
@ -126,7 +126,7 @@ volatile bool Temperature::temp_meas_ready = false;
        Temperature::iTerm[HOTENDS],
        Temperature::dTerm[HOTENDS];

-  #if ENABLED(PID_ADD_EXTRUSION_RATE)
+  #if ENABLED(PID_EXTRUSION_SCALING)
    float Temperature::cTerm[HOTENDS];
    long Temperature::last_e_position;
    long Temperature::lpq[LPQ_MAX_LEN];
@ -444,7 +444,7 @@ Temperature::Temperature() { }

 void Temperature::updatePID() {
  #if ENABLED(PIDTEMP)
-    #if ENABLED(PID_ADD_EXTRUSION_RATE)
+    #if ENABLED(PID_EXTRUSION_SCALING)
      last_e_position = 0;
    #endif
    HOTEND_LOOP() {
@ -560,7 +560,7 @@ float Temperature::get_pid_output(int e) {

        pid_output = pTerm[HOTEND_INDEX] + iTerm[HOTEND_INDEX] - dTerm[HOTEND_INDEX];

-        #if ENABLED(PID_ADD_EXTRUSION_RATE)
+        #if ENABLED(PID_EXTRUSION_SCALING)
          cTerm[HOTEND_INDEX] = 0;
          if (_HOTEND_TEST) {
            long e_position = stepper.position(E_AXIS);
@ -575,7 +575,7 @@ float Temperature::get_pid_output(int e) {
            cTerm[HOTEND_INDEX] = (lpq[lpq_ptr] * planner.steps_to_mm[E_AXIS]) * PID_PARAM(Kc, HOTEND_INDEX);
            pid_output += cTerm[HOTEND_INDEX];
          }
-        #endif //PID_ADD_EXTRUSION_RATE
+        #endif // PID_EXTRUSION_SCALING

        if (pid_output > PID_MAX) {
          if (pid_error[HOTEND_INDEX] > 0) temp_iState[HOTEND_INDEX] -= pid_error[HOTEND_INDEX]; // conditional un-integration
@ -598,7 +598,7 @@ float Temperature::get_pid_output(int e) {
      SERIAL_ECHOPAIR(MSG_PID_DEBUG_PTERM, pTerm[HOTEND_INDEX]);
      SERIAL_ECHOPAIR(MSG_PID_DEBUG_ITERM, iTerm[HOTEND_INDEX]);
      SERIAL_ECHOPAIR(MSG_PID_DEBUG_DTERM, dTerm[HOTEND_INDEX]);
-      #if ENABLED(PID_ADD_EXTRUSION_RATE)
+      #if ENABLED(PID_EXTRUSION_SCALING)
        SERIAL_ECHOPAIR(MSG_PID_DEBUG_CTERM, cTerm[HOTEND_INDEX]);
      #endif
      SERIAL_EOL;
@ -949,7 +949,7 @@ void Temperature::init() {
    #if ENABLED(PIDTEMP)
      temp_iState_min[e] = 0.0;
      temp_iState_max[e] = (PID_INTEGRAL_DRIVE_MAX) / PID_PARAM(Ki, e);
-      #if ENABLED(PID_ADD_EXTRUSION_RATE)
+      #if ENABLED(PID_EXTRUSION_SCALING)
        last_e_position = 0;
      #endif
    #endif //PIDTEMP
@ -959,7 +959,7 @@ void Temperature::init() {
    #endif //PIDTEMPBED
  }

-  #if ENABLED(PIDTEMP) && ENABLED(PID_ADD_EXTRUSION_RATE)
+  #if ENABLED(PIDTEMP) && ENABLED(PID_EXTRUSION_SCALING)
    last_e_position = 0;
  #endif

--- a/Marlin/temperature.h
+++ b/Marlin/temperature.h
@ -31,7 +31,7 @@
 #include "planner.h"
 #include "thermistortables.h"

-#if ENABLED(PID_ADD_EXTRUSION_RATE)
+#if ENABLED(PID_EXTRUSION_SCALING)
  #include "stepper.h"
 #endif

@ -79,7 +79,7 @@ class Temperature {
      #if ENABLED(PID_PARAMS_PER_HOTEND) && HOTENDS > 1

        static float Kp[HOTENDS], Ki[HOTENDS], Kd[HOTENDS];
-        #if ENABLED(PID_ADD_EXTRUSION_RATE)
+        #if ENABLED(PID_EXTRUSION_SCALING)
          static float Kc[HOTENDS];
        #endif
        #define PID_PARAM(param, h) Temperature::param[h]
@ -87,7 +87,7 @@ class Temperature {
      #else

        static float Kp, Ki, Kd;
-        #if ENABLED(PID_ADD_EXTRUSION_RATE)
+        #if ENABLED(PID_EXTRUSION_SCALING)
          static float Kc;
        #endif
        #define PID_PARAM(param, h) Temperature::param
@ -149,7 +149,7 @@ class Temperature {
                   iTerm[HOTENDS],
                   dTerm[HOTENDS];

-      #if ENABLED(PID_ADD_EXTRUSION_RATE)
+      #if ENABLED(PID_EXTRUSION_SCALING)
        static float cTerm[HOTENDS];
        static long last_e_position;
        static long lpq[LPQ_MAX_LEN];
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@ -1684,7 +1684,7 @@ void kill_screen(const char* lcd_msg) {
        MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I ELABEL, &raw_Ki, 0.01, 9990, copy_and_scalePID_i_E ## eindex); \
        MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D ELABEL, &raw_Kd, 1, 9990, copy_and_scalePID_d_E ## eindex)

-      #if ENABLED(PID_ADD_EXTRUSION_RATE)
+      #if ENABLED(PID_EXTRUSION_SCALING)
        #define _PID_MENU_ITEMS(ELABEL, eindex) \
          _PID_BASE_MENU_ITEMS(ELABEL, eindex); \
          MENU_ITEM_EDIT(float3, MSG_PID_C ELABEL, &PID_PARAM(Kc, eindex), 1, 9990)