b1c13bce58
Fix EEPROM_CHITCHAT (and debug_out.h) ( #13716 )
6 years ago
455ee23499
Fix, improve Power Loss Recovery ( #13703 )
...
- Save and restore workspace offsets
- Add retract and purge (hidden) options
- Always restore axis relative modes
- Use added `G92.9` to do position restores
6 years ago
df75a606ff
Support MKS SGen board ( #13694 )
6 years ago
20dc45bca7
Refactor, fix ESP32 WebSocketSerial ( #13689 )
6 years ago
db373f130c
Update Slovak language ( #13692 )
6 years ago
6fe90f0324
Define I2S pins for ESP32 ( #13714 )
6 years ago
aa0f7afbe6
Fix call to uninitialized PWM pin, heater 2 overlap ( #13674 )
6 years ago
57aaa9110b
Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x
6 years ago
6a71df2925
Tweak babystep add_steps
6 years ago
9dd4252b39
Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x
6 years ago
bdfffee037
Modify Z-offset overlay for clarity ( #13660 )
6 years ago
84273557f9
Move and update heated chamber settings ( #13671 )
...
Co-Authored-By: the-real-orca <stephan.veigl@gmail.com>
6 years ago
62b4265410
Update German language ( #13665 )
6 years ago
b18316dd37
Fix some spacing
6 years ago
f2ba0a5ae7
Tweak some formatting
6 years ago
7e58d33a2e
Update some headers
6 years ago
64ee064ded
Update Italian language ( #13661 )
6 years ago
14b561f182
Extra AxisEnum values for E0-E5
6 years ago
9e86fc3831
Require homing to toggle leveling ( #13652 )
6 years ago
9fd3e64ba8
Fix compile error with EXTRUDER>1 ( #13651 )
6 years ago
509dc283f2
Restore declarations of G53-G59 ( #13654 )
6 years ago
2adc37becc
MAGNETIC_SWITCHING_TOOLHEAD ( #13629 )
6 years ago
492883859e
Don't protect unused CS pins ( #13647 )
6 years ago
9898f53361
Fix missing IS_SD_PRINTING
6 years ago
1e59a2ac73
Hide pause/stop unless active printing
6 years ago
ae42206500
Fix SD_REPRINT_LAST_SELECTED_FILE
6 years ago
d72946a8d7
Fix LPC1768 build with no watchdog
...
Fix issue mentioned at https://github.com/MarlinFirmware/Marlin/pull/13587#issuecomment-481737509
6 years ago
cee3b172b9
Fix Marlin splash screen logic ( #13646 )
6 years ago
052f2ac352
Fix RURAMPS4D baud rate ( #13644 )
6 years ago
e6ebd30f60
Fix LCD issue on stepper timeout ( #13630 )
...
- Remove a re-paint of the status screen on stepper timeout, which would cause a garbled LCD with `LIGHTWEIGHT_UI` and could interrupt whatever else the user might be doing in a submenu (such as playing games!)
- Use the helper function to reset stepper timeout.
6 years ago
a8edd4f6d4
Fix Azteeg X5 MINI BOARD_NAME ( #13632 )
...
Co-Authored-By: klcjr89 <klcjr89@users.noreply.github.com>
6 years ago
5018fdacbe
Support FYSETC_MINI_12864_PANEL ( #13365 )
6 years ago
4900c28bf6
Fix IDEX tool-change, and more ( #13614 )
6 years ago
ba31d39f6d
Azteeg X5 Mini support ( #13425 )
6 years ago
9cb5c57b84
Adjustments to ui8tostr_percent
6 years ago
321a5e6580
Fix SD card reselect when scrolled ( #13624 )
...
- Change encoder position to 16-bit integer.
- Fix `SD_REPRINT_LAST_SELECTED_FILE` when the screen is scrolled.
6 years ago
0e3c9e726d
Set default Raptor runout/caselight pins
6 years ago
5e38d70697
Fix M217 report label, general cleanup
6 years ago
fae2b7edc3
Update MMU2 code style
6 years ago
c8a83fb122
SPINDLE_LASER_ENABLE => SPINDLE_LASER_ENA
6 years ago
9abe9aff56
Confirm before starting SD print ( #13616 )
6 years ago
7e0008f5b3
Fix SETCURSOR_RJ
6 years ago
81c2c3ec11
Continuous filename scrolling ( #13609 )
6 years ago
c29820f649
Suppress compile warning ( #13612 )
6 years ago
a2b3ad6d0a
Don't override RGB LED pins, by default
6 years ago
9a56d90150
Fix M43 on LPC176x ( #13587 )
...
The real fix. PR #13568 was wrong.
6 years ago
9cee81d47e
Option to show babysteps total since G28 ( #13580 )
6 years ago
3221658a78
Adjust park position description
6 years ago
028b78f623
Suppress a compile warning
6 years ago
cf12fc8366
Expand on serial debugging ( #13577 )
6 years ago
bf7b28b456
Fix incorrect variable name ( #13585 )
6 years ago
27693cec29
Extend ESP32 HardwareSerial with flushTX. ( #13588 )
6 years ago
3c47e1b4d1
Support Black STM32F407VET6 with RAMPS-like shield ( #13524 )
6 years ago
0dfd76ba55
Fix Z hotend offset broken by parking extruder tool change ( #13582 )
6 years ago
027a901bec
Trim whitespace
6 years ago
692a0198f9
Fix SPISettings frequency parameters in ESP32 HW SPI ( #13573 )
6 years ago
63d95862fa
Add FastIO TOGGLE for ESP32 ( #13574 )
6 years ago
0992d1a4c8
Fix Invaders game compile error ( #13575 )
6 years ago
cd1ef33c8c
Drop extra PLR save test ( #13554 )
6 years ago
72c7751768
Fix SERIAL_POS in use with DEBUG_OUT
6 years ago
cacec5764a
Clean up whitespace
6 years ago
83e214478e
Click-hold to exit Invaders, fix Brickout compile
6 years ago
240ea1bbb3
Split up games into separate files
6 years ago
27a4927ed1
Add option to move away from endstop after homing. ( #13557 )
...
Add option to move away from endstop after homing.
- Add `ENDSTOP_BACKOFF` for printers with a recessed Z home button (Lulzbot TAZ 6).
- Also prevents chattering when sensorless homing with axes against bumpers.
6 years ago
d44e5b1fde
Fix stepper direction macros, multi-nozzle scope ( #13569 )
6 years ago
10b9632bed
Fix menu history item selection
6 years ago
f1810689ff
Fix bootscreen condition
6 years ago
b21ca53dfc
SPIFFS-backed PersistentStore for ESP32 ( #13566 )
6 years ago
af92ee9dd6
No PLR include needed in queue.cpp
6 years ago
5d2c5877f7
DOGM bootscreen cleanup
6 years ago
2aa35e95af
More G26 arc cleanup
...
Followup to #13531
6 years ago
20a41e2f7b
SDCARD_RATHERRECENTFIRST with SDCARD_SORT_ALPHA
6 years ago
46445a5a16
Event G-code for Stop SD Print ( #13547 )
...
Co-Authored-By: 7eggert <7eggert@gmx.de>
Co-Authored-By: robbycandra <robbycandra.mail@gmail.com>
6 years ago
2cfa9e9008
Fixed chamber-related compile error ( #13552 )
6 years ago
a0a5c31c05
Power-Loss initialization fix ( #13553 )
...
- Only save to PLR file on moves with E and X or Y
- Save to PLR after any long-ish Z downward move
6 years ago
8b7c3eec83
Games, for fun (and stress-testing) ( #13464 )
6 years ago
fbc7b51a24
Use NO_FETCH for Dual X G28 ( #13539 )
6 years ago
5de7b5b35e
Games, for fun (and stress-testing) ( #13464 )
6 years ago
4961d8aa3e
Update G28.cpp ( #13539 )
6 years ago
de0046fc8b
Fix empty HAS_TIMER macros
6 years ago
c9079165ee
Fix MAX6675 readout with Hardware SPI ( #13530 )
6 years ago
04086fc455
Minor optimization to ARC_SUPPORT code ( #13531 )
6 years ago
a3f67acd6d
Fix Power Loss Recovery file delete ( #13522 )
6 years ago
d992dfe7d5
Use the percent util func in the string func. ( #13523 )
6 years ago
b1f739e27b
CR10_STOCKDISPLAY support in Bigtreetech SKR ( #13516 )
6 years ago
5679fae11e
UltraLCD enhancements (lower fan resolution, backlash menu) ( #13519 )
6 years ago
f0d14b83bc
Save/restore Relative modes in Power-Loss Recovery ( #13501 )
6 years ago
c6466c23fe
Silence signed/unsigned comparison warning. ( #13508 )
6 years ago
7240e3a68f
Allow G26 with no heated bed ( #13511 )
6 years ago
6d9aaca082
Fix compilation error for MKS Robin ( #13506 )
6 years ago
c6dbe6e9d6
Fix Teensy 3.5/3.6 __get_primask ( #13514 )
6 years ago
e40636a7c1
Replace digitalPinHasPWM with HAS_TIMER ( #13520 )
6 years ago
b46ca9aa94
Less timely comment, tweak conditions
6 years ago
eb91f08725
Update descriptions and dont call unneeded functions
6 years ago
fe346cd4d1
Fix DEBUG_EEPROM_READWRITE compile error ( #13492 )
6 years ago
e3ab54753b
Add extra Linear Advance factors ( #13490 )
6 years ago
ffc2c2d7c5
Move FAST_PWM_FAN code to HALs ( #13491 )
6 years ago
263f8edff8
Disable volumetric extrusion during G26 ( #13479 )
6 years ago
6bd0a0be97
Relocate DUE Stepper ISR to TC0,2 ( #13481 )
6 years ago
13a12f8a87
Fix UBL mesh editor on delta ( #13478 )
6 years ago
d2e0c03afb
Remove trailing whitespace
6 years ago
7462fe3068
Fix compile error, squelch warnings ( #13487 )
...
- Fix path to `bedlevel.h` include file
- Add default to `case` statements to suppress warnings
6 years ago
0d3ea59bcf
Add pins for Dual Z UART on SKR 1.3 ( #13474 )
...
Fix #13470
6 years ago
ef3b93daa1
Fix STM32F1 SD-based EEPROM emulation ( #13475 )
...
If `openFile` is given `true`, then it has read-only access. Because all the writing occurs on the next line, this breaks SD card as EEPROM.
6 years ago
aacc1148b0
Fix M106 for index > extruders ( #13473 )
6 years ago
c5e96544b5
Fix vtool compiler warning ( #13476 )
6 years ago
02dc72acb6
Disable ABL when leveling corners ( #13471 )
6 years ago
d96f7d6068
Minimum segments for G2/G3. Better for small arcs. ( #13466 )
6 years ago
380c771988
Handle word-padded flash-based eeprom (STM32F1)
...
Fix #13445
6 years ago
32332bcd03
Proceed with Teensy 3.5/3.6 HAL ( #13450 )
6 years ago
407202cc0f
Fix BLTouch pre-3.0 compatibility ( #13454 )
6 years ago
a0ca98f699
Additional ExtUI features ( #13449 )
6 years ago
a8fa275dc6
Fix Fan 0 responding to all fan speeds ( #13444 )
6 years ago
5eeffab5e5
Fix BLTouch Menus ( #13441 )
6 years ago
d8329d858d
Default argument to defer_status_screen
6 years ago
9562a02c5a
Update Italian language ( #13440 )
6 years ago
70e6a3db8a
Add LEVEL_CORNERS_HEIGHT to LEVEL_BED_CORNERS ( #13439 )
6 years ago
f3cf95a937
Update Slovak language. ( #13435 )
6 years ago
144018736a
Use USES_Z_MIN_PROBE_ENDSTOP
6 years ago
5b2c37d6c1
Followup to BLTouch ( #13422 )
6 years ago
3fb8489ae3
EXTUI and UBL compilation fixes ( #13420 )
6 years ago
b376c7e374
Group DISABLED items
6 years ago
58bca67883
Unify status scrolling further
6 years ago
c4443f885e
finishstatus => finish_status
6 years ago
691e5c3bb8
BLTouch V3.0 support ( #13406 )
6 years ago
49cf92dc36
Extended condition macros ( #13419 )
...
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
6 years ago
d20eab4f83
Fix macro in set_color() ( #13417 )
6 years ago
59353546e8
Fix BUTTON_EXISTS and misplaced comma ( #13411 )
...
Fixes #13410 and redeclaration of `BUTTON_EXISTS`
6 years ago
09eb30dc05
IDEX Mirror mode based on Formbot / Vivedino Symmetric mode ( #13404 )
6 years ago
5c1aa5162d
Adjust M206 output in M503 for DELTA
6 years ago
ad8b82d054
Fix KILL_PIN assignment for MKS_MINI_12864
...
According to #13397
6 years ago
3a916b4ef2
Create bresenham.h
6 years ago
5d3928cb01
PWM is not defined on Arduino Core STM32 ( #13405 )
6 years ago
9a515cbd32
Fix Pause Print message and behavior ( #13394 )
6 years ago
f5bcc00570
Unify debugging output with debug_out.h ( #13388 )
6 years ago
cc8a871705
Add capability string CHAMBER_TEMPERATURE ( #13391 )
...
Reference: #13380
6 years ago
67bee06e43
No patch needed for non-libmaple analogWrite
...
See https://github.com/pinchies/Marlin/pull/1#issuecomment-471388743
6 years ago
f89b375fb9
Fixes and improvements for PWM pins ( #13383 )
6 years ago
87162658c4
Fix and improve software endstops ( #13386 )
6 years ago
6214c997c0
Remove includes of <binary.h>
6 years ago
4555ae448f
Fixups for ESP32
6 years ago
a5ea3e2f15
Fix hotend offset on switching toolhead change
...
See commentary at #11623
6 years ago
8e0ac93d60
Fix 'UNUSED redefined' compiler warning ( #13387 )
6 years ago
0278ad0a6d
Add ESP32 WiFi interface ( #11209 )
6 years ago
c03df89921
ExtUI Mesh Leveling Extensions ( #13363 )
6 years ago
050eac03af
Single X Duplication Extension ( #13373 )
...
* Multi-nozzle selective duplication
* Use a bit-mask, reduce stepper_indirection.h size
* Tweak the multi-nozzle duplication description
* Use 'S' as a bool in M605
* Add HAS_DUPLICATION_MODE conditional
* Remove '_MODE' from the option name
* M605 in the style of Stacker M280
* Also include direct mask style (P)
6 years ago
ad91476d26
Fix USEABLE_HARDWARE_PWM
6 years ago
d63da4592d
Tweak to SCARA_move_to_cal
6 years ago
51ff5b68fa
Clean up fastIO ahead of PWM patch
6 years ago
388babbcea
Tweak SERIAL_PRINTF
6 years ago
d94e077901
Apply HAS_HOTEND_OFFSET where needed
6 years ago
11d6a939df
Always define axis_unhomed_err
6 years ago
10c8c034bd
Allow both encoder and ADC keypad ( #13355 )
6 years ago
31ff7da7ac
Add missing CHAMBER options (for M141) ( #13371 )
6 years ago
0375e92847
Followup to serial rework
...
As mentioned in #13370
6 years ago
013bb469ca
Fix compilation for STM32F1 with no SDIO ( #13366 )
6 years ago
e52bcc9408
Limit top bed temp to BED_MAXTEMP - 10
...
The chances of a 10° overshoot is pretty minimal.
6 years ago
98b55421a5
Clean up some temp config
6 years ago
785a7028bf
Followup to 'volatile' patch ( #13369 )
...
Originally #13344
6 years ago
aa1d587128
Some LCD code cleanup
6 years ago
fa11427ec6
Remove obsolete LCD_CONTRAST
6 years ago
4df9509ead
Add support for printers with inverted fan pins ( #13362 )
...
Add support for printers with inverted fan pins by adding `#define FAN_INVERTING 1` to `Configuration_adv.h` and modifying the fan write macros.
6 years ago
1f7e220387
Make HAL ISR macros function-like
6 years ago
e3ce346f24
Report position to host in Nozzle::park
6 years ago
77b4176152
Use lib include for bit_constants.h
6 years ago
3419099f0a
Clean up whitespace
6 years ago
4c43e6c48b
Fix "spontaneous heating" issue (WRITE bug) on STM32 ( #13356 )
...
Should fix "spontanous heating" problems due to order of operations error. Error occurs at least with ststm32 v5.1.0 in PlatformIO.
6 years ago
b824a517aa
Add G38.4 and G38.5 ( #13348 )
6 years ago
e4d080e63c
Reset after kill with a button on the KILL_PIN ( #13091 )
6 years ago
c36989c39e
Fix chamber temperature measurement ( #13350 )
6 years ago
12503fce06
Followup to wait_for_user fix
6 years ago
33a08fc6f7
Fix typos from temperature rework
...
Followup to #12201
6 years ago
2efbcc90c5
Fix wait_for_user compile error ( #13352 )
6 years ago
60e82e3929
Send notifications to ExtUI for M0/M1 ( #13344 )
...
- Send notifications to ExtUI for M0/M1
- wait_for_user can be non-volatile (not changed by interrupt)
C / C++ compilers don't optimize away reads of non-volatile variables when a function call is used between accesses, because *any* variable could be changed by the function call. Since `wait_for_user` can't be changed without a function call, it should be non-volatile so the compiler can optimize away cases where it is read more than once without an intervening function call.
6 years ago
00fc43144a
Follow up fixes to various PRs. ( #13334 )
...
- Ensure `MarlinUI:get_progress` is defined for `ExtUI`.
- Fix for `BACKLASH_SMOOTHING` with small segments.
`BACKLASH_SMOOTHING` with extremely small segments failed to fully correct due to the correction factor being rounded down. Rounding up ensures the entire backlash will converge to zero even for small segments.
- Add pinout for the beta revision `EINSY_RETRO`.
- Update soft endstops with tool offsets (for toolchange et. al. move clamping) (#12568 )
6 years ago
c7d618b4d9
Fix SERIAL_ECHOLNPAIR
...
Fix #13333
6 years ago
d54741eda8
Update some G26 plausible values. Add speed control. ( #13330 )
6 years ago
fb3302feda
Fix STM32F1 Serial and ADC pins ( #13331 )
6 years ago
dbead66988
Allows user to set (almost) any PWM frequency ( #12638 )
6 years ago
afbec5ff7e
Have ExtUI::getProgress use ui.get_progress ( #13328 )
6 years ago
645ca7af7a
M141 Heated Chamber, Temperature rework ( #12201 )
6 years ago
44571775bd
Further support for 6 extruders
6 years ago
893ee68b52
Clean up trailing whitespace
6 years ago
39f1222060
One fewer G29 error string
6 years ago
cfdb38eda4
Allow SERIAL_ECHOPAIR to take up to 12 pairs ( #13311 )
6 years ago
4771e372a1
Update criteria for PAUSE/RESUME/STOP menu items ( #13294 )
6 years ago
56fdcf93d1
Disallow SD_DETECT_INVERTED with FYSETC F6. ( #13307 )
6 years ago
7ce13a6ec1
Fix a print_job_timer compile error ( #13304 )
6 years ago
6df51201ae
Include EXTENSIBLE_UI in single LCD sanity check ( #13306 )
6 years ago
2e5a3b01fd
Save Power Loss Recovery only on move commands
6 years ago
15738ea506
Update a motion comment
6 years ago
bc87e97357
Prevent a tool change move out of bounds
6 years ago
2212da453a
Distinguish between analog/digital auto fans ( #13298 )
6 years ago
2513f6b550
Fix multiport G28 with Binary Transfer ( #13308 )
6 years ago
38bef9da91
Report auto temp to both serial ports, if available ( #13301 )
6 years ago
367d392880
Init stepper current after stepper pins are set up ( #13302 )
6 years ago
bf8b38e0f7
Relocate configs above Marlin/src folder ( #13299 )
6 years ago
d71dc5cf42
Fix for Ender 4 fan/case light pin
...
See #12731
6 years ago
7640b328df
Support for Tronxy X5S 2e ( #13297 )
6 years ago
599cdc3f0f
Remove dead code from get_pid_output
...
See #12981
6 years ago
ManuelMcLure