f10c87b442
Update Endstops class for 1.1.x parity
7 years ago
d6df0322c2
Update M666 for XYZ dual endstops
7 years ago
fbc41c0e98
Update Marlin G-code summary
7 years ago
239902f861
Fix E2END and add EEPROM to Smart RAMPS
...
Reference #9983
7 years ago
ddce486360
Merge pull request #10032 from thinkyhead/bf2_unknown_z_no_raise
...
[2.0.x] Add UNKNOWN_Z_NO_RAISE to prevent Z grinding
7 years ago
79e6d890d5
Add UNKNOWN_Z_NO_RAISE to example configs
7 years ago
419d12ca1b
Add UNKNOWN_Z_NO_RAISE option
...
With this option enabled, Z won't ever be raised until after `G28` has been completed, and it won't raise if Z becomes unknown. This is good for machines whose beds fall when Z is powered off.
7 years ago
3b4c89e4b5
Move do_probe_raise closer to set_probe_deployed
...
…and limit the raise to Z_MAX_POS
7 years ago
2908e76151
Fix position_is_reachable_by_probe typo, add comment
...
Fix #10029
7 years ago
26dc594ebb
prevent steppers from turning off during manual probes
7 years ago
d8eadf3796
fix ubl_G29.cpp Travis error
7 years ago
914bb80bde
removed SDSS init
...
added device & comm drivers for shared SPI LCDs
mistyped some updates in ultralcd_impl_DOGM.h
remove unwanted changes in onfiguration.h
still can't type
Update HAL_LCD_class_defines.h
include USB mass storage & misc
7 years ago
6d9ea7e184
Fix position_is_reachable_by_probe typo, add comment
...
Fix #10029
7 years ago
646dd5554c
prevent steppers from turning off during manual probes
7 years ago
161ff9ff35
Fix UPDATE_ENDSTOP for CorePQ compatibility
...
Fixes #9939
7 years ago
49ca67202f
Patch configuration_store for extra serial port
...
Fix #9948
7 years ago
cc59ac4603
Fix _tmc_say_axis string address
...
Fixes #10003
7 years ago
16a8edc5f0
Add more delay before pulse off in Linear Advance ISR
...
A capital idea from https://github.com/MarlinFirmware/Marlin/pull/9914#issuecomment-371614153
7 years ago
dfd5d2fe75
Have position_is_reachable_by_probe use the whole bed ( #10020 )
...
Previously `position_is_reachable_by_probe` was limited to the area specified for `G29` mesh leveling (even if leveling was disabled). This change will properly consider the entire bed area so that `G30` and other non-leveling probing may take place.
7 years ago
67a17446f2
Fix DUE incompatible enum type specification ( #10017 )
7 years ago
3c58ca181c
[2.0.x] Correct step pulse width on LPC1768, DUE & Teensy35_36 ( #10016 )
7 years ago
e297748b22
Apply const, safe_delay in servo.*
7 years ago
3c2bfa5e53
Update powersupply_on in power_on/off ( #10015 )
...
Fix #10004
7 years ago
42608b1925
Init old_red to 127 to ensure initial change
...
Fix #10012
7 years ago
317673fec3
Init watchdog last in setup()
7 years ago
8d32fd997f
Wrap NORM_E_DIR/REV_E_DIR macros in do{}while(0)
7 years ago
1913c37a91
Tweak to manual move eindex arg
7 years ago
98d48fc731
Followup to HAL_timer_restrain
...
Followup to #9985
7 years ago
03e3011332
Fix compile error with MAX_MESSAGE_LENGTH
...
Fix #9988
7 years ago
6b4a928145
2uS default step pulse ( #9989 )
7 years ago
ca577c1638
Fix up various spacing, comments, and typos
7 years ago
d45f19d385
Remove Unicode from var name
7 years ago
224688cc3b
Fix for unicode-ignorant gcc preprocessor
7 years ago
a1a88ebabc
HAL function to ensure min stepper interrupt interval ( #9985 )
7 years ago
be0e100fed
Fix sd subdirectory encoder position
...
Followup to 7e386c7
7 years ago
04dedc7ed8
always completely initialize display ( #9981 )
7 years ago
0149680f54
Fix compile error with char LCD
7 years ago
9515e5aefb
Fix LA_active_extruder (static)
7 years ago
e5ec793f7e
Wrap stepper indirection macros
7 years ago
5b85464791
Fix for LA ( #9964 )
...
Missed in the original LA 1.5 PR: eISR has to use a local copy of
current_block->use_advance_lead because it might still run wenn the last
block has been set to NULL.
7 years ago
7e386c7e98
Fix encoder position for sddirectory
7 years ago
1d604be671
Suspend auto-report during UBL map output
7 years ago
eb212ae073
Add suspend_auto_report flag to suppress auto-report
7 years ago
ffbf63e6af
Add HAS_TEMP_SENSOR conditional
7 years ago
94f5204629
Move AUTO_REPORT_SD_STATUS to SDSUPPORT block
7 years ago
22a017a856
Rebuild SD file sort array on Stop SD Print ( #9976 )
...
Thanks Chuck Hellebuyck.
7 years ago
920d92aa46
Merge pull request #9974 from thinkyhead/bf2_tmc_util_progmem
...
[2.0.x] Move tmc_util.* extended_axis_codes to PROGMEM
7 years ago
b198b49d15
Followup to AUTO_REPORT_SD_STATUS
...
Followup to #9832
7 years ago
2057177184
Make enums into implicit char
7 years ago
e28e3bb532
Move extended_axis_codes to PROGMEM
7 years ago
ca0def766e
LIN_ADVANCE single stepper optimization
7 years ago
8291ae34f2
Support duplication mode in LIN_ADVANCE
7 years ago
b08ec22fe1
Show E0-E4 in monitor_tmc_driver output ( #9969 )
...
Fix #9966
7 years ago
fd883c909a
Improvements to Lightweight ST7920 status screen. ( #9952 )
...
- Show units on lightweight status screen.
- Fixed progress bar so it works with M73
7 years ago
0dd1c4458d
Put more code between pulse start and stop ( #9959 )
7 years ago
f9cafc4001
Fix menu highlight glitch, tweak scrolling code ( #9957 )
7 years ago
bf9fc8ac0e
M851 - report only without parameters
7 years ago
eb867817b5
Prevent filament runout false positives ( #9946 )
7 years ago
36262a0479
Use static classes for job timers ( #9938 )
7 years ago
930720bbbb
Fix broken reverse planner ( #9943 )
...
From #9914 by @Sebastianv650
7 years ago
025118da3e
Init print_job_timer in setup() instead of "early" ( #9937 )
7 years ago
beeed580b8
Implement digipots for MKS SBASE ( #9927 )
...
Fix #9477
7 years ago
07ae23fe14
No pulse delay on last e_steps in advance isr
7 years ago
881529a401
Fix #9904 - toDigital should show 00-99 hours
7 years ago
ed758de80d
tweak comment in stepper.cpp
7 years ago
d1dc863962
autotemp_factor is not value_celsius_diff
...
See https://github.com/MarlinFirmware/Marlin/issues/9852#issuecomment-369861822
7 years ago
f3914a432e
Clear retracted status when homing the Z axis
7 years ago
6d7f4f84e2
Add board MKS_BASE_HEROIC ( #9926 )
...
Followup to #9008
- Don't define micro-stepping pins for boards that lack them.
- Allow setting of 128 microsteps with `M350`.
7 years ago
649f375494
Fix: M112 calling kill from interrupt ( #9923 )
...
Fix #9906
7 years ago
c37b3f995a
Sanity-check some graphical LCD-only options
7 years ago
a2a672449a
Updated boot screen description
7 years ago
61620cbd15
Tweak M211
7 years ago
6e08ddce6e
Correct M401 / M402 description
7 years ago
23a576faf7
[2.0] Fix for FW retract ( #9878 )
7 years ago
461c8ef834
Fix DIGITAL_PIN_TO_ANALOG_PIN macro for Atmega1284p ( #9881 )
7 years ago
88b6a15b47
Update M900 verbiage
7 years ago
e2df286444
Update pinsDebug.h ( #9874 )
...
Fix display of analog input value.
7 years ago
91db7930dc
Drop SCARA_FEEDRATE_SCALING
...
The updated planner takes the length of the move, so this pre-calculation is no longer needed.
7 years ago
c1f4112bdc
[2.0.x] Add 1284 support & misc. bug fixes ( #9864 )
7 years ago
118899357d
Add sanity checks to Linear Advance 1.5 ( #9873 )
7 years ago
1746749361
Followup to #9868
7 years ago
a446433c87
Fix SENSORLESS_HOMING for Core Kinematics ( #9868 )
7 years ago
2d1233b86c
Fix lcd_quick_feedback call for BTN_BACK
7 years ago
eb8b758226
Fix some mapper, charsize problems ( #9866 )
7 years ago
8bffb26c23
Fix manual move position display
...
Manual moves now correctly include the workspace offset.
7 years ago
8c03ce4d80
Fix Z safe homing sanity check for no probe
...
Fix #9851
7 years ago
c471389afb
Add Einsy Rambo pins ( #9850 )
7 years ago
c22f8dd660
Get duration_t in printcounter.h for its clients ( #9843 )
7 years ago
24b9c1923f
ubl G29 tweaks
7 years ago
bd0967ad87
Fix BTN_BACK
...
Followup to #9835
7 years ago
d9a98b5814
Russian language update
...
From #9849
7 years ago
461cb22069
Fix Zonestar / ADC keypad with RAMPS. ( #9840 )
7 years ago
35ec67885a
Add support for BACK button (RADDS) ( #9835 )
7 years ago
0bc4c216ac
Patch up pinsDebug pins
7 years ago
cd7dc49527
Fix CR-10 status screen missing commas
...
Fix #9660
7 years ago
4817c78a65
Add files via upload ( #9828 )
7 years ago
eb079959fb
Report sd card progress [FR] #9751 ( #9832 )
...
* SD Status auto-report feature
Feature Request #9751
7 years ago
7bdb98c946
Fix #9826 . Solution by @gloomyandy
7 years ago
02474a321a
Fix SDSUPPORT (and indentation)
...
Based on https://github.com/MarlinFirmware/Marlin/issues/8746#issuecomment-368471901 by @benlye
7 years ago
cfdcf91df5
Fix compile error with initTone
7 years ago
ae1a2ff16f
Pins parity with 1.1.x
7 years ago
306f44198e
Prevent serial buffer overrun in Pronterface
...
75ms might be excessive... But I know people are seeing problems with PronterFace as the client...
7 years ago
966d9af98a
Mesh export in Bilinear + UBL M503
7 years ago
8d5a77001e
EEPROM parity with 1.1.x
7 years ago
2228dff3ea
ubl.h compile flags from 1.1.x
7 years ago
cb4cb86d80
Useless line removed ( #9814 )
...
nextAdvanceISR is set in the next if structure in every possible
situation, so it's useless to set it once more before.
7 years ago
f2c0ed193d
Add tone support for Due ( #9807 )
7 years ago
0557ab5780
Fix CONFIG_ECHO_START bug
...
In reference to #9633
7 years ago
61688233c7
HAL style tweak
7 years ago
19ba91f77a
Fix lcd_custom_bootscreen compiler warning
7 years ago
f3dbe19669
Tweaks to HAL codestyle
7 years ago
54c65fc3cb
Standardize LCD buzz defaults
7 years ago
4953fb1c88
Standardize encoder defaults
7 years ago
078627f805
[2.0.x] Creality Ender-4 configuration ( #9803 )
...
* Move Creality Ender-2 configurations
* Add Creality Ender-4 configurations
7 years ago
5684beae90
Bring some configs up to speed
7 years ago
813f9f3082
[bugfix_2.0.x] - LIN_ADVANCE V1.5 stepper.cpp ( #9797 )
...
Removal of obsolete (i) from port of LIN_ADVANCE from V1.1.x to V2..0.x.
7 years ago
3f89bbeab5
Drop a conditional only used once
7 years ago
689bc99402
Correction to acceleration
7 years ago
92c8efdc96
Change Folger Tech i3-2020 defaults
7 years ago
2024775e07
Spanish (UTF8) Language ( #9786 )
...
From #7314 by @MrAmericanMike
7 years ago
43ff15244d
Fix a progress bar condition
7 years ago
b8485528b2
Prettify LCD_PROGRESS_BAR options
7 years ago
4d588b2d6a
Further fix of LCD_PROGRESS_BAR ( #9783 )
7 years ago
e0227f2110
Fix *_CS_PIN for RAMPS_FD
...
Fix #9778
7 years ago
e65a853c59
Fix LCD_PROGRESS_BAR
...
Fix #9208
7 years ago
07d7e8aa1b
Merge pull request #9775 from thinkyhead/bf2_g28_restore_leveling
...
[2.0.x] Add RESTORE_LEVELING_AFTER_G28 option
7 years ago
e749945317
Un-pause print on cancel ( #9780 )
7 years ago
17d984eab3
Add RESTORE_LEVELING_AFTER_G28 to example configs
7 years ago
b2cf253a13
Add RESTORE_LEVELING_AFTER_G28 option
7 years ago
65519263f4
Fix broken LEVEL_BED_CORNERS
...
Fix #8805
7 years ago
8f9262f3fe
Fix path to _Statusscreen.h
7 years ago
007c56f453
Fix HAL_STM32F1/endstop_interrupts.h
...
In response to https://github.com/MarlinFirmware/Marlin/issues/7076#issuecomment-367556982
7 years ago
0542b03750
Fix bootscreen include path
...
Fix #9759
7 years ago
2bd252b501
[2.0.x] LIN_ADVANCE v1.5 ( #9712 )
7 years ago
90fa423737
Preliminary cleanup of #include structure ( #9763 )
7 years ago
a6b7e721cf
Slovak language update
7 years ago
2c9775313a
Fix Z position on HD44780
...
Fix #9732
7 years ago
9c9cd54ef3
Add Z Fade Height edit to UBL and Tune submenus ( #9738 )
7 years ago
3851ffce0f
Merge pull request #9637 from marcio-ao/pr-lite-st7920-status
...
[2.0.x] Light-weight status screen for ST7920 based printers
7 years ago
5f8b2c2ff0
More descriptive environment error message
7 years ago
b17982bde9
Merge pull request #9769 from teemuatlut/bf2_compile_fixes
...
[2.0.x] Fix compiling with M600 and runout sensor
7 years ago
799e3b2b40
LPC1768 HAL formatting/comments
7 years ago
5968a3e60e
Add ADVANCED_PAUSE_FEATURE include
7 years ago
93cc3a8492
Make used methods public
7 years ago
13176dfe2f
Merge remote-tracking branch 'origin/pr-lite-st7920-status' into pr-lite-st7920-status
7 years ago
424b9a83cd
Slovak language update
...
From @rmoravcik at #9760
7 years ago
e75ccfd727
Hatchbox Alpha Config with E3Dv6 ( #9762 )
7 years ago
556abc0888
Add LIGHTWEIGHT_UI to example configs
7 years ago
532bb3aaa1
Lightweight status screen for ST7920
...
- This status screen uses the ST7920 character generator to greatly
reduce SPI traffic and MCU load when updating the status screen.
- Has been tested with the RepRapDiscount Full Graphics Smart Controller
but should work with any LCD that uses an ST7920 or fully compatible
controller.
7 years ago
59c98d6fd5
Hephestos2 heated bed kit for all ( #9757 )
7 years ago
8c1a82c327
Merge pull request #9753 from ldkraemer/BF2CR-10Bootscr
...
[2.0.x] Creality CR-10mini configuration
7 years ago
72f63a4980
Fix DOGM progress bar with LCD_SET_PROGRESS_MANUALLY
7 years ago
6c3162f9c6
Add CR-10 Mini configuration
7 years ago
4431f4deb8
Add CR-10S _Bootscreen.h
7 years ago
e7f329edb2
Added bed corners to bed icon.
...
- This makes it look less like a dash (idea stolen from cjsoong).
7 years ago
e84a5545e1
Removed unnecessary extended mode switch.
...
- This will slightly reduce the SPI requirements for
updating the progress bar.
7 years ago
343c17d5b3
Reduce Creality3D bootscreens flash usage ( #9752 )
7 years ago
63bc6ade4f
Fix pinsDebug compile error
7 years ago
d504bbbfa4
Fix botched check for being off the mesh...
7 years ago
716a22498f
Changed temp type from uint8_t to int16_t
...
- Also deleted old implementation files which had been renamed.
7 years ago
7d8c6b3f3c
Add 20x4 option for Sainsmart LCD ( #9740 )
7 years ago
1d7f5be0ff
quick_home_xy sensorless homing
7 years ago
eb182c08af
Merge pull request #9733 from thinkyhead/bf2_random_fixup_branch
...
[2.0.x] Drop HAL_timer_set_count
7 years ago
03b48df7bb
RADDS: Add EEPROM Size ( #9737 )
...
needed for UBL
7 years ago
9f0907d40c
Fix big edit font width calculation
...
Fix #9685
7 years ago
9d5968e8ec
Fixed dual-extruder in Lightweight UI.
...
- Moved bed icon down when the machine is configured with two nozzles.
7 years ago
4303f2e377
Fix MALYAN_LCD message bugs
...
Fix #9711
Replacing #9731
7 years ago
12c5fdfdb5
Fix CYCLES_PER_MICROSECOND conflict on STM32F1
7 years ago
a810e585db
Drop HAL_timer_set_count
7 years ago
a823b801b8
Merge pull request #9729 from Bob-the-Kuhn/U8G-compile-error-2.0.x
...
[2.0.x] Move #include <U8glib.h> in ultralcd_st7920_u8glib_rrd_AVR.cpp (fix bug introduced in PR #9624 )
7 years ago
47d529aac5
move #include <U8glib.h>
7 years ago
aada1e698f
Removed unused configuration options.
7 years ago
c7513eb032
Merge branch 'pr-lite-st7920-status' of github.com:marcio-ao/Marlin into pr-lite-st7920-status
7 years ago
73cd34b121
Finish AUTO_POWER_CONTROL implementation
...
Followup to #9503
7 years ago
fc460fff94
Extend menu items for SWITCHING_EXTRUDER
...
Reference #5367
7 years ago
c4ec01d59b
Conditionals for SWITCHING_EXTRUDER
...
In reference to #5367 . SWITCHING_EXTRUDER was not fully implemented for EXTRUDERS > 2.
7 years ago
d4e4fe40e0
Add SENSORLESS_HOMING delay to quick_home_xy
...
Fix #9471
7 years ago
25e3e62354
Null-terminate lcd_status_message
7 years ago
a11fcd46a2
Merge pull request #9699 from Studiodyne/Studiodyne-filamentMulti
...
[2.0.x] Support multiple filament runout sensors
7 years ago
b3deadd898
Don't raise FIX_MOUNTED_PROBE on stow
...
Reference #9336
7 years ago
a74cece6d0
CR-10 Bootscreen
...
From @plainpylut in #9660
7 years ago
8733d5a296
Add NUM_RUNOUT_SENSORS to example configs
7 years ago
d3ca82d8c2
Support for multiple filament runout sensors
7 years ago
0106c3e476
Style tweak in MarlinSerialUSB_Due.h
7 years ago
3d1692d1fd
Fix X2 enable with X_DUAL_STEPPER_DRIVERS
...
From #9286
7 years ago
c241da32e8
stepper.h parity with 1.1.x
7 years ago
3af988a7f3
Add sensorless homing delay to home_z_safely
...
Based on #9705
7 years ago
ca55f2927a
Pulldown pin mode support ( #9701 )
...
Implemented for LPC1768.
7 years ago
aef9e036bf
More overridable FIL_RUNOUT_PIN
7 years ago
79272f98fc
Proposed changes to ST7920 lightweight status screen
7 years ago
24eb275b99
Added a light-weight status screen for the ST7920
...
- The status screen uses the ST7920 character generator to greatly
reduce SPI traffic and MCU load when updating the status screen.
- Has been tested with the RepRapDiscount Full Graphics Smart Controller
but should work with any LCD that uses an ST7920 or fully compatible
controller.
7 years ago
a6563df705
Sync pinsDebug_list.h between 1.1.x and 2.0.x ( #9693 )
7 years ago
bab0e975c8
The ENDER can use BOARD_MELZI_CREALITY ( #9692 )
7 years ago
83d7e95de0
Add MSG_THERMAL_RUNAWAY_BED ( #9691 )
7 years ago
8ffa0b24a4
Strip excess G28 debug logging
7 years ago
9019ea0fce
Option to force X or Y to home first when homing the other axis
7 years ago
60fc372211
Add CODEPENDENT_XY_HOMING to example configs
7 years ago
da7c51d820
Space out some pins lines
7 years ago
e05673a379
[2.0.x] VIKI2 & RE_ARM changes ( #9686 )
...
* VIKI2 & RE_ARM changes
1. Remove `DISABLED(SDSUPPORT)` from ST7565 in `ultralcd_impl_DOGM.h`. These LCDs share pins with the SD card and can run at the SD card rates.
2. Add SDSS definition to `pins_RAMPS_RE_ARM.h`. Apparently the SDSS definition in `pins.h` is being processed before the one in `spi_pins.h` which resulted in not being able to read the SD card.
7 years ago
7a381366aa
Merge pull request #9208 from benlye/benlye-m73
...
[2.0.x] Allow M73 without SDSUPPORT
7 years ago
7d093edc18
Add Tronxy XY100 configuration
...
Based on #9674
7 years ago
472229b974
Fix #9681
7 years ago
f6cc89ec7c
LCD_PROGRESS_BAR w/out SDSUPPORT for character LCD
7 years ago
330437ad7c
Update LCD_SET_PROGRESS_MANUALLY in configs
7 years ago
168af8bacb
Allow LCD_SET_PROGRESS_MANUALLY without SDSUPPORT
7 years ago
bf5df306e1
Fix compile error with SHOW_BOOTSCREEN disabled
...
Fix #9530
Fix #9524
7 years ago
3021058e6d
Fix non-UTF8 Czech language
7 years ago
bd54ce830a
Include utility.h in neopixel.cpp
7 years ago
ff90cb409e
No space for E2 with ReARM+RAMPS
...
Addressing #9474
7 years ago
d7f82c8ddf
Drop extra avr/pgmspace include in _Bootscreen.h
...
Addressing #9441
7 years ago
1bf2b1e475
Use serial macro in sd_mmc_spi_mem.cpp for Due
7 years ago
241e55ef3b
Apply SERIAL_FLUSH macro
7 years ago
1f8f8c9104
Merge pull request #9657 from petrzjunior/bugfix-2.0.x
...
[2.0.x][Language] Update Czech (Advanced pause...)
7 years ago
cff62042ee
Fix LCD manual movement on kinematic machines ( #9655 )
7 years ago
749bc42aa9
TMC SGT is int8 ( #9651 )
7 years ago
2d749d490b
Fix / complete USE_CONTROLLER_FAN ( #9666 )
7 years ago
08d685c97a
Followup to 21e60fd
7 years ago
c49844df66
!ENABLED => DISABLED
7 years ago
304e0f8945
Followup to 21e60fd
...
`ENABLED` only works for flag-type options. Floats must use `#ifdef`.
7 years ago
6a70a4fbb3
Fix G26 circles ( #9627 )
...
Easier to configure. Catch an odd divisor.
7 years ago
349dafa728
config update (set to -1)
7 years ago
21e60fd3ed
Allow user to control Z-Height correction for off mesh movements ( #9661 )
7 years ago
5d9e16ea49
Update Czech advanced pause
7 years ago
c78e1c0f23
Fix G26 Circles... ( #9641 )
...
* Fix G26 Circles...
7 years ago
b648999528
Merge pull request #9624 from Bob-the-Kuhn/RRD-8-bit-code-to-2.0.x
...
[2.0.x] Add delays to AVR driver for RRD Full Graphic Smart Controller
7 years ago
8db67d1647
Fixed compilation when using avr-gcc
...
- avr-gcc is more strict than the Arduino IDE, it seems.
7 years ago
f05bd7f082
Added files missing from earlier commit.
7 years ago
4880ac6533
Added a light-weight status screen for the ST7920
...
- The status screen uses the ST7920 character generator to greatly
reduce SPI traffic and MCU load when updating the status screen.
- Has been tested with the RepRapDiscount Full Graphics Smart Controller
but should work with any LCD that uses an ST7920 or fully compatible
controller.
7 years ago
3d74ff3c87
Cartesian UBL systems should not use SEGMENT_LEVELED_MOVES
...
There is significant downside to breaking up the long line segments on UBL Cartesian machines. It adds a lot of extra computation but worse... It cuts out all of UBL's off mesh Z-Height correction checks. There have been a large number of people complaining about the nozzle going to infinity or crashing into the bed lately. They are being caused by
```
void unified_bed_leveling::line_to_destination_cartesian()
```
not watching over the segments being queued up for movement.
7 years ago
5dc04c5201
Fix #9361
7 years ago
133b38b93b
Complete M48 description ( #9631 )
7 years ago
93c0198b2d
Init LCD welcome message programmatically
7 years ago
67a4cc610b
French update
...
Based on #9610
7 years ago
e7b50c89b0
Fix #9201
...
FILAMENT_LCD_DISPLAY can work with SDSUPPORT
7 years ago
8d71ad37cb
flush comment to match 1.1.x
7 years ago
272f132b82
Remove stray ` from STM32F1 HAL
...
As noted in #8585
7 years ago
5b70d3da1c
Update DIGIPOT_I2C_MOTOR_CURRENTS comments
7 years ago
2ec65051fd
Fix serial comment sp.
7 years ago
9a423e9a89
tested
7 years ago
d741bcf8a9
Tweak boards spacing
7 years ago
f8912bb19f
French update
...
Based on #9590 by @studiodyne
7 years ago
e6b8207b03
Restore welcome message
7 years ago
89165326b4
Cleanup after vim and vigor
7 years ago
423bf9955e
Set Megatronics baud rate to 115200
...
Fix #9092
7 years ago
377108619b
Fix plan_arc clockwise (G2)
...
Fix #9482
7 years ago
378867d894
Update PB Rev.F pins
7 years ago
8e0c107545
Have Kossel Pro use Z_MIN_PROBE_ENDSTOP ( #9586 )
7 years ago
03d790451f
[2.0.x] HAL timer set/get count => set/get compare ( #9581 )
...
To reduce confusion over the current timer count vs. the compare (aka "top") value. Caution: this re-uses the function name, changing its meaning.
7 years ago
7a4029d1b1
Correct MOTHERBOARD for Geeetech i3 Pro X
7 years ago
451fb16f9b
Fix CYCLES_PER_MICROSECOND conflict
7 years ago
3e384b60ce
Malyan M200 fix E0_AUTO_FAN_PIN ( #9580 )
...
Fixes #8794
7 years ago
33752de12d
Update some outdated configs
7 years ago
38c7d53bf7
Repair some spacing
7 years ago
e3043d7ac7
Fix #8744
7 years ago
d3ddd5ffaa
Merge pull request #9576 from thinkyhead/bf2_more_tests
...
[2.0.x] Fix Power class
7 years ago
7280fa1e31
Patch Power class
7 years ago
4aff6c1c32
Tronxy X5S pins and configuration
7 years ago
05aa75cecf
Melzi boards use melzi pins
7 years ago
5785bbb491
Updated french translation ( #9556 )
7 years ago
299606e4ae
[2.0.x] Memory overflow protection ( #9562 )
7 years ago
5990266724
Init CS pins before loading settings ( #9566 )
7 years ago
d3fdb44ad8
Update TMC section with SW SPI pins ( #9554 )
7 years ago
3168f0e646
Merge pull request #9549 from thinkyhead/bf2_prevent_comments_resetting
...
[2.0.x] Prevent watchdog reset due to many comments
7 years ago
9be6aa3f79
Merge pull request #9544 from thinkyhead/bf2_reliable_probe_heaters_off
...
[2.0.x] More reliable PROBING_HEATERS_OFF with BED_LIMIT_SWITCHING
7 years ago
c0dd9ef9f2
Support for AnyCubic TriGorilla board ( #9551 )
7 years ago
da693a636e
Fix handling of escapes in serial input
7 years ago
cc9cef7f7a
Fix HAS_CONTROLLER_FAN in is_power_needed
7 years ago
112917cfef
No EXTRUDER_RUNOUT_PREVENT during print
7 years ago
c30a8067ab
Prevent watchdog reset due to many comments
...
Addressing #7449
7 years ago
b7053156fe
Minor comment/condition cleanup
7 years ago
f64d300cfd
Sanity check SERIAL_PORT
...
Addressing #7400
7 years ago
5a70887467
Size lcd_status_message based on language ( #9545 )
7 years ago
545cd8fa60
Tweak malyanlcd.cpp
7 years ago
e698998343
More reliable PROBING_HEATERS_OFF with BED_LIMIT_SWITCHING
7 years ago
27faeafc1b
[2.0.x] BIBO Cyclops ( #9541 )
7 years ago
2014d38e10
NEOPIXEL_BRIGHTNESS parity
7 years ago
694d2ebec0
TMC SW SPI pins in Configuration_adv.h
...
Counterpart to #9632
7 years ago
9854262334
[2.0.x] Fix compile warning ( #9539 )
7 years ago
b639f1ad4b
Correct some retract() comments
7 years ago
1541224a81
Enable Z axis and delta sensorless homing ( #9516 )
7 years ago
b2f8b4ada5
I2C position encoders update ( #9533 )
...
Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.
7 years ago
93af0365e8
[2.0.x] Add support for Cohesion3D ReMix and Mini ( #9512 )
...
* Add support for Cohesion3D ReMix and Mini
* Two separate pins files for pedantic reasons
7 years ago
23240f7986
Fix sw serial pins for TMC2208
...
From #9518 by @melvinisken
7 years ago
d42a87cb31
Update language Italian
...
From #9508 by @tnw513
7 years ago
2538f019d0
Update language Basque-Euskera
...
From #9514 by @1138-4EB
7 years ago
d168ee9bed
Drop leveling include from steppers.cpp
7 years ago
09c8807a36
Minor formatting in queue.cpp
7 years ago
704d33c374
Special override of LCD_WIDTH
7 years ago
b3f115fa0a
Marlin.ino needs no content ( #9506 )
7 years ago
ca8fdff1af
Comment G26 properly
7 years ago
8558264514
Configs for Prusa i3 Pro B GT2560 Rev.A Plus ( #9505 )
...
One without probe and one with BLTOUCH.
7 years ago
b5e92f4f90
[2.0.x] Enable / disable PSU automatically ( #9503 )
7 years ago
eecb0188c0
Add ULTI_CONTROLLER to example configs
7 years ago
16739264d3
Add UltiController v2.1 support
...
Add compatibility with the original screen bord from Ultimaker 2 printer (UltiController v2.1 with the PG-2864ALBP I2C display)
7 years ago
a8c4174a13
M100 comment
7 years ago
38d62494ef
Adjustment to DOG_CHAR_*_EDIT
7 years ago
8a6feab1c4
Num-to-string functions for DEBUG_LEVELING_FEATURE
7 years ago
766faa05a9
sp
7 years ago
f27c89980a
[2.0.x] Simplify bltouch configuration ( #9488 )
7 years ago
338dac258b
[2.0.x] Fix compiler error when G26 is enabled ( #9492 )
7 years ago
4ddb6a3a1f
Merge pull request #9470 from thinkyhead/bf2_malyan_clueless
...
[2.0.x] Malyan M200 LCD
7 years ago
03bfc0d7c8
Merge pull request #9439 from thinkyhead/bf2_fix_G26_circle_bumps
...
[2.0.x] Change G26 circle angles
7 years ago
e5ee0b6f6c
Implement MALYAN_LCD
7 years ago
b939a2e88c
Watchdog conditional for LPC
7 years ago
4925f60cff
Add MALYAN_LCD to configs
7 years ago
3a1225e438
Sanity check SENSORLESS_HOMING
7 years ago
2ea4e74ed3
Misc. comments
7 years ago
aecf0c9bb9
Allow override of CS pins generally
7 years ago
0891b58c30
#ifdef tweaks
7 years ago
428f164d02
[2.0.x] Bug fix - "M114 D" and Due (dtostrf C linkage) ( #9481 )
7 years ago
693843f1fa
Allow override of RAMPS CS Pins ( #9472 )
7 years ago
ac6bf7226a
Update of comments in thermistor files. No functional changes. ( #8986 )
7 years ago
da3a0d619c
Add Selena Compact board ( #9407 )
...
5-axis, high performance, powerful board with Smoothieware opensource firmware. Designed for 3D printer, Laser cutter or CNC mill. Five changed independent drivers on board. Two extruders 3d printer support.
7 years ago
786746404b
[2.0.x] Apply feedrate to nozzle movement for kinematic machines ( #8778 )
7 years ago
5364b92c37
Drop obsolete string
7 years ago
34624cf399
[2.0.x] BIBO TouchX configuration ( #9469 )
7 years ago
3d72fe0730
snapshot
7 years ago
33ec599ca0
Tweaky LPC1768 SPI spacing/style
7 years ago
c46de340b7
Clean up trailing whitespace
7 years ago
e1fd9c08b3
[2.0.x] Add support for LPC1769 at 120 MHz ( #9423 )
7 years ago
6ace57e1b0
[2.0.x] remove duplicated include ( #9445 )
...
This was present in #9357 but lost
7 years ago
9e13d1fad5
[2.0.x] Fix temperature out of LCD ( #9461 )
...
Fix bug introduced in #9415
7 years ago
e6cdc438fd
Change G26 circle angles
...
To prevent the nozzle from colliding with the printed pattern.
7 years ago
a8764ac5d5
G26 parity with 1.1.x
7 years ago
374f2a5e16
[2.0.x] Fixed wrong information about TMC2208 wiring ( #9335 )
7 years ago
a0570ff1eb
Fix caselight on Due ( #9364 )
7 years ago
b13099de3f
General cleanup of HAL code
7 years ago
9b9350e010
Fix jerky Z motion between probes
...
Suggested by #9375
7 years ago
d6e29e9597
Update French language
...
Based on #9373 by @nikkoura
7 years ago
e1117a8492
[2.0.x] fix compile errors when CNC_COORDINATE_SYSTEMS is enabled ( #9380 )
7 years ago
ea9ad4e46d
[2.0.x] Fix compile error on delta when NO_WORKSPACE_OFFSETS ( #9388 )
7 years ago
79796b22ad
Fix up _Bootscreen.h and _Statusscreen.h
7 years ago
21179f8300
Fix the "slow" version of the G-code parser
7 years ago
c251601916
Simplified SET_BIT, moved to endstops.cpp
7 years ago
eb18ae9003
Define LSBFIRST / MSBFIRST for LPC
7 years ago
f8227abf1c
Merge pull request #9384 from tcm0116/2.0.x-retract
...
[2.0.x] Clear retracted status when homing the Z axis
7 years ago
ea5f91737f
Merge pull request #9392 from studiodyne/studiodyne-pause
...
[2.0.x] Pause resuming fix
7 years ago
5c69d45f5b
[2.0.x] TMC2130 support for LPC platform ( #9114 )
7 years ago
34160806c0
Fix broken G29 W I J
7 years ago
f5cfdf6efe
Use _BV32 to avoid name conflict
7 years ago
6339b506c0
Make sure binary.h is included as needed
7 years ago
51d080d2c1
Update Pause
7 years ago
7035471982
Clear retracted status when homing the Z axis
7 years ago
6d4bc9a1f8
[2.0.x] Fix SD wrong filename list ( #9342 )
...
If last file in directory has short filename and is preceded by a deleted long file name. SD menu will wrongly report long deleted file name as last entry
7 years ago
c6e01ebd52
never mind ...
7 years ago
ab709ccac1
add USEABLE_HARDWARE_PWM & clear up some compiler warnings
7 years ago
fc5c1a28d8
Fix M118 parameter parsing
7 years ago
399bca316a
Fix has_value with FASTER_GCODE_PARSER
7 years ago
80d3ded895
Change parser codebits from array to int32_t
7 years ago
053b1371c7
Simplify G-code debug option
7 years ago
608f8b10da
Parser val method parity with 1.1.x
7 years ago
2bea1bda56
Move more strings to PROGMEM
7 years ago
58671e1bc1
Marlin must override _BV for 32-bit masks!
7 years ago
45cfb16424
Merge pull request #8355 from tcm0116/2.0.x-TwoWire
...
[2.0.x] Master-only TwoWire (I2C) class for LPC1768
7 years ago
1dcfe193ac
Optimize some serial strings
7 years ago
9644fe1839
Lightly optimize arc length calculation
7 years ago
c9bda932fe
Patch M114 D logical output
7 years ago
e5ca60acf5
Patch G29 no_action for A and Q
7 years ago
696f8eb4c6
Include Z Fade in log_machine_info
7 years ago
3217da6fa5
Followup patch for TMC stepper init
7 years ago
db031d5d76
Add missing SoftwareSerial begin for TMC2208
...
Based on #9299
7 years ago
3db35ba9be
[2.0.x] Fix change filament for delta machines ( #9295 )
7 years ago
2ebf52e57d
Fix Skew Correction pre-calculation overflow error
7 years ago
adb2ac4747
Fix skew settings report precision
7 years ago
205c5fa078
Merge pull request #9277 from oysteinkrog/fix/DualX_Endstops
...
[2.0.x] Fix DUAL_X_CARRIAGE endstop tests
7 years ago
90d011cc48
Use ADD_PORT_ARG for all cases
7 years ago
51c7b5d46f
Fix set_home_offset bug from bad porting
7 years ago
b1cd012aa6
Clean up and document load/unload/pause/resume
7 years ago
266086670b
Better LCD message when heating needed
7 years ago
a718f5bdf3
Don't run `M600` on filament runout if the nozzle is cold
7 years ago
61bf8478a2
Add hotEnough methods
7 years ago
7a52dfad55
Merge pull request #9283 from thinkyhead/bf2_jgaurora_configs
...
[2.0.x] Add JGAurora A5 support
7 years ago
f875f49caa
[2.0.x] LPC1768: Fix: Serial pins disabled correctly when in use ( #9193 )
7 years ago
c63cffca7f
Add example configs for JGAurora A5
7 years ago
7d6c009104
Add thermistor 15 tuned for JGAurora A5
7 years ago
582d073de1
Patch up digital microstepping and SPI CS pins
7 years ago
ab8a1a2a0d
Sync gCreate gMax1.5+ config with 1.1.x
7 years ago
f9dbd4d9f4
Updated FolgerTech i3-2020 config
7 years ago
348b454401
Probe bounds based on bed size
7 years ago
a440522f84
Merge pull request #9284 from Bob-the-Kuhn/DUE-pins-debug
...
[2.0.x] PINS_DEBUGGING maintenance
7 years ago
58ed9901d7
Consistent NEOPIXEL_TYPE options
7 years ago
382a5e3318
Clean up trailing whitespace
7 years ago
441517bbe1
Fix DUAL_X_CARRIAGE endstops
...
\#8170 fixed
7 years ago
b46932f0c0
Merge pull request #9273 from thinkyhead/bf2_creality_tuneup
...
[2.0.x] Fix and improve Creality configs
7 years ago
49bcb5ce2d
Merge pull request #9220 from benlye/lcd-timer
...
[2.0.x] Fix LCD timer string length
7 years ago
07db5638e2
Add a heating indicator X offset
7 years ago
c68ce8667d
Fix and improve Creality configs
7 years ago
8190fdb260
[2.0.x] Option to use Neopixel as case light ( #9270 )
...
* Add option to use Neopixel as case light
* Apply CASE_LIGHT_USE_NEOPIXEL to example configs
7 years ago
9b519864bf
[2.0.x] Relative movements fix ( #9259 )
7 years ago
887664aa61
Restore broken Dual X Carriage
7 years ago
fb044b6a64
Fix HAL_timer_set_current_count for STM32F1
7 years ago
a8638aa20d
Update STM32F1 timer code to use libmaple bb_perip
7 years ago
2e2fd8fd79
Merge pull request #9261 from tcm0116/2.0.x-delta_softstops
...
[2.0.x] Allow DELTA to compile with soft endstops disabled
7 years ago
750cc02b3a
Use delay() in serial temp report
7 years ago
9de8c04945
Allow FIL_RUNOUT_PIN override on RAMPS-based boards
7 years ago
57b61491d3
Set FIL_RUNOUT_PIN for Creality CR10-S
...
Tested with M43 and found to be connected to DIO 2
7 years ago
4a4d832344
Use standard encoder pulses/steps for CR-10S
7 years ago
44239b1062
Allow DELTA to compile with soft endstops disabled
7 years ago
4bc4351250
Date refresh
7 years ago
303d792b9f
Merge pull request #9253 from tcm0116/2.0.x-mks_sbase
...
[2.0.x] Cleanup MKS-SBASE compile warnings
7 years ago
afec16e644
Merge pull request #9240 from tcm0116/2.0.x-eeprom
...
[2.0.x] Follow-on to #9161
7 years ago
f2ea8a0529
Merge pull request #9197 from p3p/pr_bf2_operation_freemem
...
[2.0.x] LPC1768: Free up some RAM
7 years ago
0c176c677e
Merge pull request #9231 from GMagician/2.0.x-ramps-pins-fixup
...
[2.0.x] Expand RAMP case light possibilities
7 years ago
f2d09f27bb
Merge pull request #9246 from GMagician/2.0.x-bed-temp-limit-fix
...
[2.0.x] Standardized max temp values
7 years ago
16eb966ee3
PINS_DEBUGGING cleanup for DUE
7 years ago
63fd23ab1c
Cleanup MKS-SBASE compile warnings
7 years ago
11e68541b0
Merge pull request #9245 from Bob-the-Kuhn/TMC2208-sanity-check-2.0.x
...
[2.0.x] add TMC2208 sanity check to AVR
7 years ago
429e6ba8a6
Fix lcd_preheat dummy variable types
7 years ago
719cd53e09
Standardized max temp values
...
Everywhere in menu items temperatures are "defined value" subtracted by 15.
In one place is subtracted by 5
7 years ago
0ea9cdf4f2
TMC2208 sanity check
7 years ago
7c469c0712
Suggested change to fix Due compile problem
7 years ago
bfd9728cf4
Serial buffer over run work around for v2.0.0 ( #9236 )
...
* Work around for serial buffer over run
PronterFace sends a lot of M105 commands. During long operations such
as UBL's G29 P1, G29 P2, G29 P4 and G26 this can over run the serial
buffer. This results (very often) in a M1 (actually a M1M105) ending
up in the command queue.
Until we figure out a better way to resolve this issue, this will keep
the UBL commands from experiencing bogus commands at thier completion.
7 years ago
c371bdc499
Expand RAMP case light possibilities
...
Pin 6 is only used by servos when 2 or more of them are used
7 years ago
7c18c2ea5f
Fix LCD timer string length
7 years ago
9d0cf02fef
Correct mesh size calculations
7 years ago
c7bad74d8f
Merge pull request #9202 from benlye/m73-bugfix
...
[2.0.x] Fix progress bar duration when time is exactly 86400s
7 years ago
af9b32e3b9
Give PronterFace time to print the UBL What information...
...
Give PronterFace time to print the UBL What information...
7 years ago
acb1e31374
Fix UBL Mesh Size regression
7 years ago
f5f1b069ad
Convert UBL mesh tilting to all use the same algorithm ( #9204 )
...
A number of regressions were patched also. The UBL G29 P2 and P4 Press and Hold had stopped working. It is very possible this is broken in the bugfix_v1.1.x branch also.
The main purpose of the Pull Request is to get the 3-Point mesh tilting to use the LSF algorithm just like the grid based mesh tilt. This simplifies the logic and reduces the code size some what. But the real reason to do it is the 3-Point case can be solved exactly. And by feeding these numbers into the LSF algorithm it provides a way to check all that code for 'correctness'.
7 years ago
554d849827
Fix duration when time is exactly 86400s
7 years ago
6f1bf5d212
LPC1768: Config: default to SDSORT_LIMIT = 64 instead of 256
7 years ago
1e65562d55
LPC1768: HAL: only initialise used HardwareSerial ports
...
Misc formatting
7 years ago
9dacd54a50
Get FT-i3-2020 configuration files into compliance with ?_BED_SIZE
7 years ago
d178d6e921
M503 patch for EEPROM_CHITCHAT off
...
Fix #9155
7 years ago
fa432508b0
Followup to Ender config
7 years ago
6856eccc77
Master-only TwoWire class for LPC1768
7 years ago
d5bf9e74c4
Merge pull request #8996 from p3p/pr_bf2_more_adc_filter
...
[2.0.x] PID control fix and more LPC1768 ADC filtering
7 years ago
4d2f277d43
Merge pull request #9189 from psavva/tmc_debug_compile_fix
...
[2.0.x] Fixes TMC_DEBUG compilation error
7 years ago
43d3d024ac
Update tmc_util.cpp
7 years ago
ad500b01e0
Fixes TMC compilation error
7 years ago
f4e4c7a7c8
Merge pull request #9188 from thinkyhead/bf2_creality_ender
...
[2.0.x] Add Creality Ender config/board
7 years ago
2038722c52
LARGE_FLASH obsolete
7 years ago
f887719a40
Creality Ender board support
7 years ago
9a2dd0bc5a
Creality Ender 2/4 configuration
7 years ago
2c18faf3e4
General cleanups for HAL
7 years ago
42933c804a
Cleanups for STM32F7
7 years ago
a0246c5c96
Add support for STM32F7 MCU
7 years ago
a27fa80a7e
More featureful CR-10S configuration
7 years ago
1a3d2ad275
Merge pull request #9168 from marvin-sinister/rename-M100-2.0.x
...
[2.0.x] Rename M200 pins file to uppercase
7 years ago
a408209d24
More reliable temperature serial report?
7 years ago
5f807e37c5
A second rename saves nine
7 years ago
3ae41e5f7f
Merge pull request #9152 from thinkyhead/bf2_anti_stutter
...
[2.0.x] Ensure smooth printer movements
7 years ago
02ff12d491
More up front option to show SD percentage
7 years ago
3b15c88225
Merge pull request #9153 from thinkyhead/bf2_malyan_support
...
[2.0.x] Fix support for Malyan M150
7 years ago
e753d6298f
FLSUN Kossel example configs
7 years ago
77c2d810f9
Bring configs up to date
7 years ago
3952070800
Link to marlinfw.org boot screen tool
7 years ago
0cd397a3f8
Add instructions for Malyan M150
7 years ago
344ebc3bd2
Create and use pins_MELZI_MALYAN.h for Malyan M150
7 years ago
094e9b1dab
Remove ARDUINO_ARCH_SAM from serial.h too?
7 years ago
c37d38886c
Fix serial.h avr block
...
Followup to #8148
7 years ago
4f5e087ff4
Planner anti-stutter by Sebastian Popp
7 years ago
ac368f2788
Add STEPPER_ISR_ENABLED() to HALs
...
Some also get a `HAL_timer_interrupt_enabled` function.
7 years ago
5578dccaa0
Merge pull request #9161 from tcm0116/2.0.x-eeprom
...
[2.0.x] Fix EEPROM SettingsData for 32-bit architectures
7 years ago
6ba8cf8405
Merge pull request #9163 from GMagician/2.0.x-SD-issues-fix
...
[2.0.x] sd issue fix
7 years ago
50c55b25f7
Renamed to upercase
7 years ago
6667a916a4
Indentation fix
7 years ago
be717b3c07
Save some program memory
...
This will save some program memory with no speed lose
7 years ago
f37c64ee5b
Fix unsupported CMD59
...
It seems that some SD cards don't support CRC_ON_OFF command. This fix will permit to use also these cards but leaving CRC check active on the system
7 years ago
cfd989d7c5
Fix EEPROM SettingsData for 32-bit architectures
7 years ago
da600e5fbe
Merge pull request #9132 from Bob-the-Kuhn/add-VIKI2-to-Travis
...
[2.0.x] add VIKI2 test to Travis & fix LCD contrast (again)
7 years ago
742cff5f3c
Followup to #9141
7 years ago
84de428d30
[2.0.x] Fix compile errors ( #9141 )
...
* Update persistent_store_impl.cpp
* Remove define BYTE from serial functions since Arduino docs typically show 0 for the normal case.
7 years ago
e633ce06c7
LCD contrast type mismatch is back
...
WORKS!
7 years ago
e654ea1e1a
Merge pull request #9130 from thinkyhead/bf2_tmc_followup
...
[2.0.x] More TMC followup
7 years ago
8ac246162e
Creality CR-10S configurations
...
Provided by printedsolid.com
7 years ago
048486390e
Bring some configs up to date
7 years ago
6a043eee55
Various updates for TMC support
7 years ago
d7fd78cb91
Merge pull request #8148 from tcm0116/2.0.x-multi_host
...
[2.0.x] Add multi-host support
7 years ago
a8c446c3bc
[2.0.x]DUE: Fix includes for SDSUPPORT ( #9112 )
7 years ago
f7efac57b7
Multi-host support
7 years ago
dabb75034c
Update example configurations
7 years ago
6a50adb4d5
works
7 years ago
5c076a6d93
Improved M915 description
7 years ago
a94104dbb5
Merge pull request #9113 from teemuatlut/TMC_followup
...
[2.0.x]TMC followup
7 years ago
554e577676
SERIAL_STATS_* features not supported on USBCON targets ( #9127 )
7 years ago
2db666e99a
Enable USE_ZMIN_PLUG on SCARA example ( #9126 )
7 years ago
7e000e6af4
More EEPROM field debugging ( #9123 )
7 years ago
3a99dc7c5c
2.0.x Fix compiler warning ( #9116 )
...
Fix duplicate language define warning
7 years ago
5295b4713d
[2.0.x] add semitec 104NT-4 ( #9119 )
...
Table is very very similar to old 104-GT2 so I added only the name and recycled old ID
7 years ago
cdc61ebf53
Add M915 configuration option
7 years ago
9d923c6c03
Fix TMC gcode commands
7 years ago
99516572b1
Fix TMC current read from EEPROM
7 years ago
f26805e862
[2.0.x] UBL Mesh Storage Message ( #9095 )
7 years ago
14dcad6bbc
LPC1768: Increase ADC median filter from 3 values to 23
...
Clarify the HAL_adc_get_result method to make sure correct values enter the filters
HAL: Fix the PID control loop for non-AVR platforms
7 years ago
60d07f20e7
Make mbl.has_mesh() a method
7 years ago
86818c9a89
Move MBL functions into the class
7 years ago
bbb8d4c802
Set has_mesh if user issues G9 S3
...
Prevents user from having to manually run through entire manual leveling process only to enable mesh so they can manually restore their offline mesh backup
7 years ago
2b5a9be49c
Fix M503 skew output
...
Followup to 19e75ccf86
7 years ago
cf2922f164
Laser/spindle PWM off on M5
7 years ago
5fb6dd1424
Bmp fix
...
Clockwise arrow fixed
7 years ago
cb0e826c5d
Merge pull request #9068 from Bob-the-Kuhn/SD-detect
...
[2.0.x] SD card detect improvement
7 years ago
f72b0a7b04
1234
7 years ago
702c8acdd5
Settings FIELD_TEST fix
7 years ago
e89f1453ab
UBL G29 works without settings.load()
7 years ago
950be70a33
Add FIELD_TEST to validate storage
7 years ago
760c912ab9
Add data size validation
7 years ago
b91ca168fb
Add a struct defining EEPROM storage
7 years ago
51e0f2bee3
Add MarlinSettings::validate()
7 years ago
878f54c27b
Write filler with NO_VOLUMETRICS
7 years ago
3ea6745b36
Pretty up TMC current write
7 years ago
3319765034
Detab some HAL files
7 years ago
1c41de16d4
Trailing whitespace clean
7 years ago
1746a7352e
Merge pull request #9042 from thinkyhead/bf2_M701_M702
...
[2.0.x] Improved Pause/Load/Unload, M701-M702
7 years ago
048d8a0158
CheapTRONIC v2.0 additions/revisions
...
Based on #9030
7 years ago
3a4e107b6b
use SERIAL_EOL(); instead of new line string
7 years ago
a5dfe08a81
Add precision to planner.xy_skew_factor so it doesn't print as 0.00
7 years ago
19e75ccf86
Add enough precision so planner.xy_skew_factor doesn't print as 0.00
7 years ago
4fb60e1562
M702.cpp => M701_M702.cpp
7 years ago
7541316bb4
Add M701/M702 Filament Load/Unload, M603
7 years ago
81211da7b4
M701 / M702 language changes
7 years ago
8704e533da
Apply FILAMENT_LOAD_UNLOAD_GCODES to example configs
7 years ago
455592eee8
Improvements to LCD menu macros
7 years ago
a80f2eea23
Group leveling reports for folding
7 years ago
190cd0a111
Nozzle park args
7 years ago
0e93506985
Fix for issue #9005 , #8942 - Bed PID autotuning ( #9036 )
7 years ago
016e46a3c0
Merge pull request #9009 from Bob-the-Kuhn/Due-RRDFG-power-up-garbage
...
[2.0.x] Due - fix power up garbage on RRDFG LCD
7 years ago
31582caa07
2.0 Fix for bad Pause extruder position resuming ( #9029 )
7 years ago
4626d04067
as good as i can get it
...
minor edits to force new Travis test (last one timed out)
Update u8g_com_HAL_DUE_st7920_sw_spi.cpp
initial power up display garbage gone
7 years ago
4af3d436b2
M303 pid autotune cleanup, commentary
7 years ago
e5b71af8c9
snapshot
...
found a few more nasties
7 years ago
724e3f33bc
Merge pull request #9001 from Tannoo/(2.0.x)_LCD_EEPROM_init_fix
...
[2.0.x] EEPROM init fix
7 years ago
959a2d2527
Add beginTransaction to HAL SPI ( #9019 )
7 years ago
e43f3ac989
EEPROM init fix
7 years ago
fc67c64b8f
Merge pull request #8989 from tcm0116/2.0.x_ubl
...
[2.0.x] Fix UBL compilation warnings
7 years ago
8afc4f8d9d
Fix UBL compilation warnings
7 years ago
eca5cc8669
Merge pull request #9003 from Bob-the-Kuhn/Due-PINS_DEBUG-&-related
...
[2.0.x] add Due PINS_DEBUG support & misc improvements (replaces PR #8990 )
7 years ago
e9fc7bc69c
Merge pull request #9000 from Bob-the-Kuhn/2.0-LCD-contrast
...
[2.0.x] lcd_contrast type mismatch work around
7 years ago
5574fad69c
copy of PR #8991 code
...
Formatting tweaks
correct array initialization & remove test code
7 years ago
d190c702de
Add MKS_BASE Microstepping pins
...
Based on #9008
7 years ago
5e01ee8adf
Temperature updates for parity with 1.1.x
7 years ago
adb9ecf3cc
copy of PR #8990
7 years ago
39e5fabfa9
Z BabyStepping should not be dependent on a bed leveling system being active
7 years ago
ef911a2d12
works
7 years ago
d80c4f1a6e
Fix typo in delta call to buffer_line
...
Fix #8901
7 years ago
9312ee63b0
Merge pull request #8979 from thinkyhead/bf2_sync_up_configs
...
[2.0.x] Synchronize configs with 1.1.x
7 years ago
41dfb229ec
Merge pull request #8978 from thinkyhead/bf2_slimming_option
...
[2.0.x] SLIM_LCD_MENUS option
7 years ago
3dd04736c0
Update M17_M18_M84.cpp
7 years ago
2929c9e56f
A specific option to SLIM_LCD_MENUS
7 years ago
10edb469bb
Apply SLIM_LCD_MENUS to example configs
7 years ago
5294fd132f
Merge pull request #8924 from ejtagle/bugfix-2.0.x
...
[2.0.x] Improve SW SPI for DUE a bit more
7 years ago
0b4a46fa6c
Bring configs up to date with 1.1.x
7 years ago
7cc2193bce
Add Tronxy X1 example config ( #8972 )
7 years ago
729a9f55fc
Improved Sw SPI on DUE HAL a bit more.
...
Now the USB MSD can transfer at 750k/s. Previously, it was 500k/s. I think this is the maximum achievable speed using Sw SPI.
7 years ago
615146c069
Enqueue commands better in ultralcd.cpp
7 years ago
9686ffedef
Single pause flag also indicates SD print pause
7 years ago
6d94bbf618
Apply some PGM_P pointers
7 years ago
cba44128d5
fix include
7 years ago
427df8792d
Fix Capabilities Report
7 years ago
2526ac6500
Display up to 3 extruders on char LCD
...
…and show bed level indicator at the position of the [H] icon, when a heated bed exists.
7 years ago
db32c185ae
Merge pull request #8860 from Bob-the-Kuhn/2.0.x-DUE-RRDFGSC
...
[2.0.x] DUE - update for Reprap Discount Full Graphic Smart Controller
7 years ago
9ecdd1f4c7
Multi extruder support for M600 and LCD
7 years ago
a1ce6e8ff4
Clear lcd_clicked immediately on use
7 years ago
5effe1590c
Fix NO_VOLUMETRICS bug
7 years ago
f163eede78
No sub-menu if NO_VOLUMETRICS
...
For parity with #8911
7 years ago
2c4e03d2cf
Indentation of a SW SPI file
7 years ago
1a827d5b68
Opening brace tweaks
7 years ago
a142fab155
Enable RRDFGSC on Due
7 years ago
b259bb4670
Fix tmc_util global vars
7 years ago
4ef965cc40
Fix compiler warnings
7 years ago
9e8008c49c
Fixes for G29, esp. 3POINT
7 years ago
026e301307
lcd_map_control deps on ULTIPANEL
7 years ago
f2731c9f93
Allow consecutive uses of G29
7 years ago
4b49ea1e92
General cleanup of config-store, reset_bed_level
7 years ago
2925852244
Fix GT2560 A+ servo pin
7 years ago
c6354fa153
Tweak M125 code
7 years ago
3b51f5c67e
Add pause/resume action to example configs
7 years ago
f704f405af
Add pause/resume actions on M600, M125
7 years ago
f0a8a1a853
[2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE ( #8866 )
...
* Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
7 years ago
705ea98fd3
Comment `return false` in motion functions
7 years ago
50366b00d5
Tweak cleaning buffer / SD finished command
7 years ago
28fc8741d6
Reduce default jerk. XY by half. Z by 1/4
7 years ago
1a948cbd93
Fix SET_OUTPUT glitch - LPC1768 & DUE
7 years ago
869c89d83f
Merge pull request #8865 from thinkyhead/bf2_more_scara_scaling
...
[2.0.x] SCARA Feedrate Scaling for G2/G3 - using HYPOT
7 years ago
1cf1cf8759
Add RADDS_DISPLAY to example configs
7 years ago
ea1a8d1223
add original RADDS LCD + Controller
...
adds setup for the original Radds Display+Controller+SD Card Reader PCB
http://doku.radds.org/dokumentation/lcd-display/
7 years ago
4a8fd8ae92
Merge pull request #8853 from ejtagle/bugfix-2.0.x
...
USB Mass Storage Implementation / CDC with HW flow control and misc fixes and improvements for Arduino DUE/RE-ARM based boards
7 years ago
aa97cd6e9b
Merge pull request #8871 from petrzjunior/bugfix-2.0.x
...
[2.0.x][Language] Update Czech for Dec 2017
7 years ago
2917d1217d
Revert "Followup to #8698"
...
This reverts commit 4e891e9fb7
7 years ago
69a51a426c
Update Czech language Dec 2017
7 years ago
caa5093498
General DELTA_IK macro
7 years ago
c694608450
Apply SCARA_FEEDRATE_SCALING to G2/G3
7 years ago
97d509d4d2
Revert "Improved Core-compatible jerk code"
...
Reverting commit 3cd7659
7 years ago
5bc2acc072
Restore position_float to fix LIN_ADVANCE
7 years ago
33a6fc70e4
Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)
7 years ago
d8a4db72ac
Reimplemented SW SPI for DUE in assembler. This allows to reach 12Mhz as SPI Clock and improves 4x the transfer speed to the SD card. This is REQUIRED so access to SD from USB is usable (allows 600Kbytes/second transfer speeds)
7 years ago
99b2fc2066
Adjusted timings on the ST7290 u8glib so RE-ARM and RAMPS4DUE have no problems when writing to the graphics LCD. This fixes Issue #8787 - Special thanks to Bergerac56 for testinf this out !!!
7 years ago
498ea7512a
Exposed SDCard interface to the public, to USB MSD is able to read/write sectors on the SD card
7 years ago
9aff55ed1f
Backported latest improvements and fixes from the SdFat liibrary to our own version. This includes support for CRC7 validation on commands and also, made sure that even if using software SPI implementations, SD card speed is properly adjusted when transitioning from INITIALIZATION to DATA TRANSFER mode. ALL HALs implement spiInit, even in SW SPI mode, and we NEED this change to improve 25x the transfer speed of the SD card and allow implementations of USB MSD
7 years ago
7447979110
Fixed some warnings on the MakerParts configuration, when compiling using the AVR toolchain (integer overflow on the preprocessor calculations)
7 years ago
b6f9c333d4
Adding hooks into the idle loop so HALs can execute 2nd plane tasks, such as serving SD card read/writes requested from the USB MSD layer
7 years ago
2ec4113cb2
Changes to STM32F1 HAL ( #8833 )
...
Some to correct missing files from previous PR to completely avoid
HardwareTimer Class (reduce overhead). Some changes to formatting.
Changes to DMA ADC to work correctly.
Change to F1 sanity check.
7 years ago
913d9e9a59
Matching sign across filwidth vars
7 years ago
3cde4c78b2
Use wildcard *.cpp in Makefile
...
Based on #8738
Addressing #8731
7 years ago
fdc5e72720
A single setting to validate filament width
7 years ago
93a6a4e1a8
Add VOLUMETRIC capability item
7 years ago
933f76fda3
Option to disable all volumetric extrusion
7 years ago
31e33d2acd
Add NO_VOLUMETRICS to example configs
7 years ago
fc9ee1a4de
Fix up serial sanity check
7 years ago
de5ca96654
More parity with 1.1.x, plus whitespace
7 years ago
a891d8d738
Merge pull request #8820 from thinkyhead/bf2_mks_sbase_spi
...
[2.0.x] Fix SDSUPPORT for MKS SBASE
7 years ago
097a26007f
Fix SDSUPPORT for MKS SBASE
...
Fix supplied by @cjsoong in https://github.com/MarlinFirmware/Marlin/issues/8750#issuecomment-350779983
7 years ago
8df5955da4
Revert "Reset timer count before first block step"
...
This reverts commit 5cf6a062e3
7 years ago
957bbab57f
Update inc files for parity with 1.1.x
7 years ago
f79026acc1
Apply MKS_12864OLED_SSD1306 to examples
...
Followup to #8814
7 years ago
b055d8c39c
[2.0.x] Adding support for using the MKS_12864OLED with the SSD1306 controller ( #8814 )
...
* Adding support for using the MKS_12864OLED with the SSD1306 controller
* Update comment for correct controller type
7 years ago
15d05748df
Adding support for the Tronxy and Zonestar LCD
7 years ago
9abbcc3ee0
Apply ZONESTAR_LCD to example configs
7 years ago
aed0cfa3d1
Various fixes for 2.0.x configs
7 years ago
674deaf223
Add NANODLP_ALL_AXIS to config examples
7 years ago
5595098063
V2 Extended NanoDLP_Z_Move_Sync to G4 & G28,Added all axis option.
7 years ago
2b7db90340
Bring Malyan M200 config up to date
7 years ago
8b12371e45
Change some hex case
7 years ago
4782acf60e
Merge pull request #8780 from fiveangle/bf2-typo
...
[2.0.x] typo in Marlin.cpp
7 years ago
0cd1e91056
[2.0.x] TMC driver update ( #8769 )
7 years ago
09d13f186f
Correct unskew, after all
7 years ago
0d531d9655
Missing HAS_HEAT_BED conditional
...
Fixes issue found in #8779
7 years ago
69efb87d19
typo in Marlin.cpp
7 years ago
368c124de8
Fix Planner::unskew parity with skew
7 years ago
cf2193c07f
Comment, fix filament width sensor
7 years ago
a641992c1d
Merge pull request #8762 from victorpv/patch-2
...
[2.0.x] STM32F1 HAL: Fix issue #8585 . Updates to readme.
7 years ago
ac168a03c8
Fixes for the Arduino DUE HAL (Serial Port, Graphics Display, EEPROM emulation) ( #8651 )
...
* Fixing the DUE serial port assignments: Now -1 means the SAM3x USB Device emulating a serial port, and 0 means the USB to serial adapter included as a programming port
* Improving the Fast IO port access implementation on Arduino DUE
* Implemented EEPROM emulation on Due by storing data on the internal FLASH (with wear leveling)
* Implemented a Software SPI for the ST7920 graphics display for the Arduino RAMPS for DUE, as the default one in u8glib is clocking data too fast on ARM, and the display does not understand it.
* Fixing the case where the serial port selected is the USB device
* Adding configuration for the Makerparts 3D printer (www.makerparts.net)
* Tuned MakerParts acceleration on X and Y axis so it never loses steps. Also adjusted pulses per mm to match default hw configuration
* Fine tuned Maximum acceleration for MakerParts printer
* Style cleanup
* Style cleanup (2)
* Style fixes (3)
* Fixing the DUE serial port assignments: Now -1 means the SAM3x USB Device emulating a serial port, and 0 means the USB to serial adapter included as a programming port
* Improving the Fast IO port access implementation on Arduino DUE
* Implemented EEPROM emulation on Due by storing data on the internal FLASH (with wear leveling)
* Implemented a Software SPI for the ST7920 graphics display for the Arduino RAMPS for DUE, as the default one in u8glib is clocking data too fast on ARM, and the display does not understand it.
* Fixing the case where the serial port selected is the USB device
* Adding configuration for the Makerparts 3D printer (www.makerparts.net)
* Tuned MakerParts acceleration on X and Y axis so it never loses steps. Also adjusted pulses per mm to match default hw configuration
* Fine tuned Maximum acceleration for MakerParts printer
* Style cleanup
* Style changes to u8g_dev_st7920_128_64_sw_spi.cpp
* Even more improvements to the FastIO HAL for DUE. Now WRITE() is 2 ASM instructions, if value is constant, and 5 cycles if value is not constant. Previously, it was 7..8 cycles
* After some problems and debugging, seems we need to align the interrupt vector table to 256 bytes, otherwise, the program sometimes stops working
* Moved comments out of macro, otherwise, token pasting does not properly work sometimes
* Improved Software SPI implementation on DUE: Now it honors the selected speed passed to spiInit(). This allows much faster SDCARD access, improving SDCARD menus and reducing latency
* Update u8g_dev_st7920_128_64_sw_spi.cpp
* Disabling EEPROM over FLASH emulatiion if an I2C or SPI EEPROM is present
7 years ago
084f2434a7
Update readme.md
7 years ago
7c7ae5ebef
Delete duplicated file.
7 years ago
4feffca178
fix for issue #8585
...
As reported in this issue:
https://github.com/MarlinFirmware/Marlin/issues/8585
I have it working fine in my local copy like that change.
7 years ago
d568e586b7
Fix up ubl_motion indentation
7 years ago
24f9bec6f4
UBL + DUAL_X_CARRIAGE compatibility
7 years ago
6d0678d963
Omit unused UBL motion code
7 years ago
3255712343
Skew Correction for UBL
...
Also remove unused grid slicing function when using UBL segmented.
7 years ago
3d796d8040
Move debug code
7 years ago
3db5303bfe
_buffer_line => buffer_segment
7 years ago
a71d2f3f40
UBL_DELTA => UBL_SEGMENTED
7 years ago
73e32925e4
References are better for array args
7 years ago
125c572d97
Tweak M114 detail
7 years ago
a5150c83a2
[2.0.x] Multiple updates to STM32F1 HAL ( #8733 )
...
* STM32F1 HAL
Adding files for STM32F1 HAL based on libmaple/stm32duino core.
Current persistent_store uses cardreader changes to be sent in separate
commit, but could be changed to use i2c eeprom.
There is another persistent_store implementation that uses the MCU flash memory
to emulate eeprom
Adding readme with some information about the stm32 HAL.
* Switch to Timer4 to avoid a hard reset on STM32F103C6 boards
On bluepill STM32F103C6 boards, using Timer5 results in a error() vector call. Switch to 4 since these are both general purpose, 16 bit timers.
* Add support for EEPROM emulation using Flash
Some low end machines doe not have EEPROM support. Simulate it using the last two pages of flash. Flash does not allow rewrite between erases, so skip writing the working version if that's enabled.
* Basic Pins for a malyan M200
This is a work in progress to go hand in hand with the STM32 work.
* Add support for ADC with DMA. This work has exposed a problem with the pin enumerations in STM boards vs what marlin expects (i.e, try defining PA0 as a temp pin). The hack can be removed with we go to fastio completely. To see this work, set something in adc_pins to a value like PA0 and connect your pullup resistor'd thermistor.
* Missing file - change HAL_adc_init to actually do something
We have an actual ADC init function now.
* Remove pinmode hack
Remove the pin mode hack that I was using to init PA0.
Updated Readme.md
* Several changes to timers and GPIO
Faster GPIO, and faster timer functions by accesing registers and
libmaple.
Still more changes pending for the Timer's code to skip using the
HardwareTimer class altogether.
Switch all enums to be within #defines
This change allows a user to have, for instance, TEMP_4 and TEMP_BED definied but nothing else. The enums which are not defined move "out", allowing the first ones to take the slots in the enum, and since the array is sized on ADC_PIN_COUNT, we always have the right size data and in order.
* Update Malyan M200 pins
Update Malyan M200 pins with correct fan values.
* Test all pins on actual hardware, update definitions
Some of the pin definitions were from knowlege base/pdfs. Now they've been tested against actual hardware. This should be very close to final.
* Update HAL_timers_Stm32f1.cpp
* Add sample configurations for Malyan M200
Add sample configuration for Malyan M200 without bed leveling, and move fan to auto cool E0 since this printer by default has only one fan.
Choose the timer based on MCU defintion. Timer5 is not valid on C8/CB class boards, so use Timer4 for the step timer.
readme.md update
* Updates to timers, and some stm32 boards definitiions
* Correct pin toggle macro.
* Remove duplicated Malyan M200 entry from pins.h
* Update configuration_store.cpp
* Formatting, indentation
* Formatting in HAL_Stm32f1.cpp
7 years ago
204199e1ce
Only compare XYZ to check motion
7 years ago
6686d937fb
Always report position on config load/reset
7 years ago
117fc872a7
Update current position in M852
7 years ago
7d2e850577
Have M420 report a changed position
7 years ago
03ba79f144
Sync and report changed position
7 years ago
5cf6a062e3
Reset timer count before first block step
7 years ago
6149b82119
Allow setting current timer counter
7 years ago
82ef6b5242
Add an option to specify "pulse" timer
7 years ago
b8bc965414
General cleanup HAL timers
7 years ago
69d49a2438
Shorter segments may be better
7 years ago
d576f5408e
Add MiniRAMBo 1.0a board
7 years ago
c40cb52342
Use MB() for Megatronics 3.1
7 years ago
4fa65a5c25
TCNT0 => HAL_timer_get_current_count
...
Fix #8710
7 years ago
b3daf6b5db
[2.0.x] better reverse pass ( #8722 )
...
* repair reverse_pass()
And make it readeble.
This was broken a long time ago.
Not competely unfunctional but far from optimal.
* Minor speedup when calling calculate_trapezoid_for_block
2 float / to 1 foat / and 2 float *
* Various style changes
7 years ago
f58eb391aa
[2.0.0] Better off mesh behavior for UBL ( #8714 )
...
* Better off mesh behaviour for UBL
* Suggested ubl.h changes
7 years ago
cffd052fee
[2.0.x] Fix for #8604 ( #8717 )
...
* Nozzle.cpp: replace incorrect M_2_PI (2/pi) with 2.0 * M_PI
* Use RADIANS(360) instead of 2 * M_PI
7 years ago
65d0f32f82
divide only when required
7 years ago
728acf521c
Followup to #8706
7 years ago
85c6ffbe0d
Discard all "continued" blocks on interrupted move
7 years ago
4e891e9fb7
Followup to #8698
7 years ago
de3d3b9cb1
Put FORCE_INLINE before static
7 years ago
43ea265b78
Merge pull request #8685 from MateuszKrawczuk/patch-3
...
Update TEMP_BED_PIN in MIGHTYBOARD_REVE
7 years ago
ae663a4198
PROBE_DOUBLE_TOUCH => MULTIPLE_PROBING
7 years ago
d7800e7975
Apply MULTIPLE_PROBING to example configs
7 years ago
542efda7db
Merge pull request #8698 from thinkyhead/bf2_replace_jerk_code
...
[2.0.x] Improved Core-compatible jerk code
7 years ago
3cd7659924
Improved Core-compatible jerk code
7 years ago
99fcf60977
[2.x] addressing #8644
...
Removed missing include file
7 years ago
81c0a918af
feed_factor => inverse_secs
7 years ago
f206b81cf7
Sanity check skew+UBL
7 years ago
9898b96992
No lcd_map_control flag in quick_stop
7 years ago
840289e7cc
Use block cleaning instead of split flag
7 years ago
90cf6a06be
Simplify G26 user_canceled
7 years ago
cdfabbc507
Shorten error text in G29
7 years ago
c846388a65
Standardize LCD interface code for UBL a little
7 years ago
2fde60da12
Changes for parity with 1.1.x
7 years ago
6040d4080e
Cleanup stepper ISR. Allow cleaning for endstops.
7 years ago
a4e1d83599
Fix M503 S parameter
7 years ago
a3b098b4be
Whitespace clean
7 years ago
a993c5227d
Don't split first_move while homing or probing
...
While homing or probing it might be bad if the stop/trobe triggers during the first part and the second is still in the buffer.
7 years ago
5320906b0b
Update TEMP_BED_PIN in MIGHTYBOARD_REVE
...
Pin K7 number in fastio1280.h is 69, but it's also ADC15 pin.
To get correct value from ADC reading it should be set as 15.
7 years ago
aeb5c623c1
Show "Level Bed Corners" with UBL too
...
Addressing #8676
7 years ago
5fbb2f121e
Remove skew warning that could crash the planner
7 years ago
c1184552ac
Change K1 to required option PID_K1
7 years ago
9e3fbcf35c
fix for #8669 ( #8679 )
...
* fix for #8669
* Update G28.cpp
7 years ago
d8b444c144
Cleanup constextpr in planner.cpp
7 years ago
a2372cfab5
Fix SKEW_CORRECTION without leveling
7 years ago
4d3c3d0b73
Some ST7920 parity with 1.1.x
...
Possibly more should be brought over? Discussion at #8471
7 years ago
3748c28924
Fix MBL G29 without LCD
...
Addressing https://github.com/MarlinFirmware/Marlin/pull/8575#discussion_r154536617
7 years ago
772298257b
Creality pins spacing, MINIPANEL CS pin
7 years ago
b27bc67271
Set initial endstops state
7 years ago
b6ba32ce75
Support for RAMPS Plus (3DYMY)
7 years ago
53694ebaa1
Folllwup to planner splitting
7 years ago
37fff608b0
Merge pull request #8652 from fiveangle/bf2_usbcon_xonxoff
...
[2.0.x] SERIAL_XON_XOFF not supported on USB-native AVR devices
7 years ago
4b612f590c
Split first move to planner for better chaining
7 years ago
91b63f6d69
SERIAL_XON_XOFF not supported on USB-native AVR devices
...
User could enable SERIAL_XON_XOFF on USB-native devices and it would not be enabled without warning, but M115 would report the capability as available.
7 years ago
57fac33a74
add explanations
...
1) add explanations as to why software SPIs are selected
2) remove unused flag/option
7 years ago
bb23286383
add README & modify spi_pins.h
...
still trying to fix file name
7 years ago
dd8febca1a
Revert "Merge pull request #8611 from thinkyhead/bf2_planner_split_first"
...
This reverts commit 824980e70eaa7efb96bf
7 years ago
fb44f8e50f
Merge pull request #8616 from hg42/bugfix-2.0.x
...
[2.0.x][LPC1768][FIX] NUM_DIGITAL_PINS was negative, fixes PWM, arduino io functions, M42, M43, M226, probably also Servo, some LCD, soft spi, SoftwareSerial, ... may be others
7 years ago
4c5356f77a
Merge pull request #8622 from hg42/implement-LPC1768-GET_TIMER
...
[2.0.x][LPC1768][fix] Implement GET_TIMER and other GET_xxx, fixes PWM
7 years ago
f5b4e1ef4f
as a workaround enable PWM for any pin, see PR #8622
7 years ago
6e944a413c
Merge pull request #8607 from benlye/patch-1
...
[2.0.x] Fix M49 so that it does not hang the terminal console
7 years ago
967522b95e
Merge pull request #8615 from dot-bob/Duplicator_6-2.0.x
...
[2.0.x] Example configurations for Wanhao Duplicator 6
7 years ago
f4b16a3bac
Update M49.cpp
7 years ago
f9327534f8
Merge pull request #8634 from fiveangle/bf2_report_xonxoff
...
[2.0.x] Report SERIAL_XON_XOFF in M115
7 years ago
da9f140829
Merge pull request #8637 from thinkyhead/bf2_ubl_uses_LSL
...
[2.0.x] Use custom segment length for UBL Cartesian
7 years ago
3a97de52ef
Split first move to planner for better chaining
...
Address #8573 , #8595
7 years ago
24437de591
Use custom segment length for UBL Cartesian
7 years ago
4c5ffd2349
[2.0.x] Report SERIAL_XON_XOFF in M115
...
-Report SERIAL_XON_XOFF in Extended Capabilites M115 report for hosts
-Remove outdated 256 size limitation from comments on RX_BUFFER_SIZE defines
-Update error message conditions
7 years ago
aa7efb96bf
Bring configurations up to date
7 years ago
63a91cd37a
Fix a homing comment
7 years ago
8056120195
Rename inverse_mm_s => inverse_secs
7 years ago
23557f8e77
Remove obsolete de_float
7 years ago
05f8e98c4a
Fix for issue #8629 - mismatch between number of stored and loaded dummy items on non-delta machines. ( #8631 )
7 years ago
48fb4e0932
Get Bi-Linear to work with G26
...
More corrections to make that happen...
7 years ago
0850b38b45
Get Bi-Linear working with G26
...
G26 uses logic that looks like:
```
ex = _GET_MESH_X(i + 1) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS));
```
The Bi-Linear macros need parenthesis to work correctly.
7 years ago
000b3b3117
Comment/cleanup of motion code
7 years ago
046a1ad331
Merge pull request #8625 from tcm0116/2.0.x-G33
...
[2.0.x] Fix missing return values in G33_auto_tune
7 years ago
b35c3b5eb8
Fix missing return values in G33_auto_tune
7 years ago
45c2388a58
Apply const to thermal_runaway_protection args
7 years ago
0154e3480c
New feature: BED_SKEW_CORRECTION
7 years ago
082ab8fcab
Add SKEW_CORRECTION to example configs
7 years ago
d1f11e9c10
fix missing GET_TIMER (used by PWM for Ex_AUTO_FAN)
7 years ago
dd1b503f64
fix NUM_DIGITAL_PINS being negative for more than 127 digital pins
7 years ago
bd45d0363d
Add default configurations for the Wanhao Duplicator 6.
7 years ago
91fb6231b2
Fix EEPROM V45 header, layout
7 years ago
94e6b2976e
Restore correct G26 values for gMax 1.5+ printer
7 years ago
dd3ce40826
Drop Planner::position_float, use int types
7 years ago
ec6ca37ed3
Fix (un)apply_leveling fade bug
7 years ago
a52fec6ac4
Planner class parity with 1.1.x
7 years ago
1f3ad461bc
Update M49.cpp
...
Fix M49 so that it does not hang the terminal console.
7 years ago
e37dd64548
Apply LEDColor, language fixes
7 years ago
8f90642eea
LED_CONTROL_MENU config changes
7 years ago
cf0f78336b
New Feature: LED_CONTROL_MENU
7 years ago
23e45fa3c4
Apply const to some planner vars
7 years ago
7c61bcb058
Apply SEGMENT_LEVELED_MOVES to example configs
7 years ago
ef2531558c
Add an option to segment leveled moves
7 years ago
285b868e9b
Tweak planner code style
7 years ago
1f2acc33bc
Tweaks for check_axes_activity
7 years ago
7f88334aa3
Done cleanup and removed duplicates in pins_RuRAMPS4D.h ( #8582 )
...
Remove duplicates, with followup fixes
7 years ago
a8aa43ce2d
Merge pull request #8587 from AnHardt/2_Fix_WDTO_during_long_DELTA_moves
...
[2.0.x] Fix WDTO during long delta moves
7 years ago
4793c34c53
Fix M290 boolval bug
...
Fix #8577
7 years ago
16baa48699
Fix #8579
...
Fan speed code fell into a curly brace
7 years ago
02aa93a6ad
Fix Watchdog time out during long lasting DELTA moves
...
During long lasting moves of a delta machine neither the temperatures are maintained nor buttons checked nor ... .
The fix is to call 'manage_heater()' and 'idle()' every now and then in the loop where the move is segmented.
The code is abot the same as in G2_G3 wher we had the same problem with too large circles lasting too long.
Fixing #7510
7 years ago
fadf9eb2d7
Simplify midpos calculation
7 years ago
0880031e8e
Satisfy M702 dependencies
7 years ago
0786b61ce7
Followup to #8575
7 years ago
276271e72f
Make MBL work more like PROBE_MANUALLY
7 years ago
94cb412e45
Allow override of probe bounds
7 years ago
c8718aa111
Spacing, macros in LPC1768_PWM
7 years ago
a67cf78c6b
Clean up whitespace, spacing
7 years ago
f0dd4e3fa0
Bootscreen parity with 1.1.x
7 years ago
b634bfe1b1
Tweak to readDir code
7 years ago
7be4857ab9
Tweak BLOCK_BUFFER_SIZE description
7 years ago
7d8b66e207
Merge pull request #8570 from Bob-the-Kuhn/Sbase-PWM
...
[2.0.x] MKS Sbase - add servo pin definitions and add directly controlled PWM
7 years ago
59b32c25b5
MKS Sbase changes
7 years ago
f90c075d1f
SD Menu patches
7 years ago
9b64be0bc5
Fixes for leveling sub-menus
7 years ago
25674da90c
Tweaks to do_blocking_move
7 years ago
22b897e77d
Show M211 output with workspace offset
7 years ago
d06e29846d
Loosen HAS_BED_PROBE definition
7 years ago
e48fcad615
change G26 and G29 bit function names to avoid HAL collision
7 years ago
41ec449960
Fix G26 error return
7 years ago
9badf5dc0d
Fix Micromake C1 config
7 years ago
7576ad7fc2
Merge pull request #8554 from tcm0116/2.0.x-cleanup
...
[2.0.x] Fix for #8525 and other cleanup
7 years ago
27c5692b13
Syntax tweaks
7 years ago
d18d40e1d6
M290 report on change, P0 to leave Probe Z Offset alone
7 years ago
65f365333f
[2.0.x] G33 probe error handling
7 years ago
8c69adba8b
Merge pull request #8553 from Bob-the-Kuhn/2.0.x-U8Glib-follow-up
...
[2.0.X] U8Glib follow up
7 years ago
be00e421a7
Patch up M290, M851
7 years ago
fc40d56131
fixed error, updated defaults, added notes
...
Travis fix - only allow ultralcd_st7920_u8glib_rrd_AVR.cpp to compile when ST7920 selected
7 years ago
d29cb646e3
Fix erroneous reference to temperature in time calculations
...
Travis is having problems at: https://github.com/MarlinFirmware/Marlin/pull/8560
So... doing a direct commit to get things correct. Bugfix_v1.1.x does not have this bug. Nothing needs to be done to that branch.
7 years ago
7bb1721f35
Fix _BV already defined warnings for Teensy
7 years ago
5f9592a523
Cleanup narrowing warning in pin_is_protected
7 years ago
34eaaab5fb
Fix _BV already defined warnings
7 years ago
2ea779e560
Allow bed probe sanity checks to run
7 years ago
d24b1190bd
Don't use Z_MIN_PROBE_ENDSTOP on DELTA
7 years ago
e34c6827ea
Init MIXING virtual tools as switching
7 years ago
a9ecb975b2
Apply LINEAR_UNIT to M503 output for M200
7 years ago
d95ee0f003
Merge pull request #8551 from revilor/bugfix-2.0.x
...
MK2_MULTIPLEXER does not require E2/E3 stepper pins
7 years ago
80ada58818
One fewer function call in probe_pt
7 years ago
92a0dc552a
MK2_MULTIPLEXER does not require E2/E3 stepper pins
7 years ago
b49acce035
Tweaks for lcd_external_control
7 years ago
1ef1052ae1
Phatter arrows for Z offset overlay
7 years ago
5926c9c97b
Followup for MESH_EDIT_GFX_OVERLAY
7 years ago
ab03a31cc9
Patch G0/G1 for NANODLP_Z_SYNC
7 years ago
a766dfb3b1
Merge pull request #8536 from thinkyhead/bf2_nanodlp_z_move_sync
...
[2.0.x] Implement NANODLP_Z_SYNC for 2.0.x
7 years ago
01e207213f
Fix MK2_MULTIPLEXER stepper indirection
7 years ago
ec04cf27d3
Fix the G26 out of scope identifiers in the v2.0.0 branch ( #8543 )
...
These changes may need to be warmed over. I tried to fix things with
the least amount of disruption. I just wanted to get the bugfix_v2.0.0
branch working for people again.
7 years ago
dc82babe8e
Implement NANODLP_Z_SYNC for 2.0.x
7 years ago
c6b0c104bb
Adapt G26 to work for all meshes
7 years ago
5ce7f23afa
Config option G26_MESH_VALIDATION for all meshes
7 years ago
c19eb33408
Move G26 to gcode sub-folder
7 years ago
a03f93bab4
Fix fan kickstart
7 years ago
9e3c41f9e8
Tweak fan kickstart / speed code
7 years ago
118ac61e59
[2.0.x] Tool change bad behaviour fix
...
Previous fix did not work as expected when axeis not homed. It raise Z but never return to original position
7 years ago
c35d27f77c
Merge pull request #8299 from tcm0116/2.0.x-BIQU_BQ111-A4
...
[2.0.x] Add BIQU BQ111-A4 board
7 years ago
1685cd193b
Tweak char_mode init
7 years ago
9406c87a97
Fix up LCD init / charset
7 years ago
fa577392b2
Add BIQU BQ111-A4 board
7 years ago
c2fc78c3a8
#ifndef => #if !PIN_EXISTS
7 years ago
c613a1ed38
Fix indentation, stepper.h dependency, etc.
7 years ago
f011a32771
Board definitions for Ultratronics Pro v1.0
7 years ago
9dad534f02
fixed
7 years ago
4371345cbe
Don't re-init graphical LCD after boot screen
...
Followup to 13a3fb1acc
7 years ago
56c02b7f59
Shift register buttons question
...
Can LCD shift registers keep up with faster MCUs?
7 years ago
3994d3b935
General cosmetic LCD
7 years ago
617993d0ea
Patch for !!TEST (was _BV once?)
7 years ago
3269d8dd62
Tweak M42 var
7 years ago
bb1a6eea88
Remove pin count check for MIGTHYBOARD_REVE
...
Remove assert and unused code since it is implemented in pinsDebug_plus_70.h
7 years ago
1ce0fb336b
Patch Max7219_LED_Set input args
7 years ago
a61127a421
[2.0.x] tool change bad behaviours
...
This will solve 2 issues on tool change.
1) when no home is done ("no_move" is set) tool change should never move X & Y because... I don't know where I am...only Z should be adjusted to avoid bed collision if other nozzle is lower than current.
Since no move no bed level matrix should be applied
2) When SWITCHING_NOZZLE is enabled and system is homed there are two movements to go to destination, but first can move Z to older position and then crash on the bed
7 years ago
e2724c68ab
Update pins_RURAMPS4D.h
...
Add and bugfix pins
7 years ago
9770062309
Merge pull request #8463 from thinkyhead/bf2_32bit_M42
...
[2.0.x] Updates to Anet A8 configurations
7 years ago
3066655727
Try port*100+pin, fix config dependency
7 years ago
ba8bc7ea80
Cosmetic tweaks
7 years ago
f409147116
Fix P2_04, P2_05
7 years ago
a28ccabe2a
M42 P1.20 fix
7 years ago
33912fa7e8
Update Temperature::setPwmFrequency prototype to match source
...
Introduced with #8446
7 years ago
b9327a4d16
Misc. general cleanup
7 years ago
8836623e0f
Fix `sq`/`min`/`max` macros after platform headers
7 years ago
fe4f009fdd
32-bit unless…
7 years ago
25af9decfe
Remove enum.h include of MarlinConfig.h
7 years ago
1d4571b88d
Dependency adjustments
7 years ago
550f1025f0
Try using <Arduino.h> everywhere
7 years ago
c0000a0cdc
Move servo code to modules/servo.*
7 years ago
81bc428b48
Don't compile custom u8g without DOGLCD
7 years ago
c14000775b
PWM fixes, slow down fan update
...
include LPC1768 syntax for M42
couple more pin_t changes
consistency
change M42 to R, P format
Revert "change M42 to R, P format"
This reverts commit 01f12f579ec9ccc1bb9126e68d2c86449e9b7edf.
7 years ago
60adc6ff02
Display filwidth ratio in terms of E mm
7 years ago
6e533748eb
Fixes #8472
7 years ago
485abb023b
Merge pull request #8456 from thinkyhead/bf2_wednesday_tweaks
...
[2.0] No retroactive adjustment with M851 Z
7 years ago
3bba7d60f3
No retroactive changes with M851 Z
...
If using babystep to adjust the Z probe offset, the axis will move and the mesh will be updated at the same time, causing a doubling of the Z offset over the rest of the print.
To correct for this, the current Z position would need to be modified in the opposite direction, canceling out the additional Z offset added to the mesh. This would be confusing to users, and moreover it would not be accurate without also taking the current Z fade level and current Z height into account.
It might make sense to change the mesh in the case where no babystepping is taking place, but this could be considered an undesirable side-effect of changing the `zprobe_zoffset`.
One way to remedy this would be to return to storing the mesh with `zprobe_zoffset` included, then subtracting `zprobe_zoffset` from the returned Z value. Thus, a babystep moving the Z axis up 1mm would subtract 1 from `zprobe_zoffset` while adding 1 to all mesh Z values.
Without including the `zprobe_zoffset` in the `z_values` there is no safe way to alter the mesh in conjunction with babystepping, although it's fine without it.
7 years ago
32512332df
Apply some formatting
7 years ago
7dacc999b9
Remove obsolete show_bootscreen var
7 years ago
9729528d13
Update UBL's Delta Probable locations
...
This is a non-intuitive change. @oldmcg says in this post https://github.com/MarlinFirmware/Marlin/issues/7572#issuecomment-340641207 that using DELTA_PRINTABLE_RADIUS is better than DELTA_PROBABLE_RADIUS for setting the probe limits. This is because the automatic probe code checks all locations for being reachable by the probe prior to doing the probe.
7 years ago
d48cb6bf41
Apply coding standards to Max7219
7 years ago
bd8bcf06e7
Updates to Anet A8 configurations
...
Based on #8426
7 years ago
7eea000f4b
E0 auto fan fixes
7 years ago
b2dda096fe
Fix FILAMENT_LCD_DISPLAY for disabled state
7 years ago
1e8afb66b7
Fix a planner comment
7 years ago
50f09cc029
Miscellaneous cleanup
7 years ago
63257dc083
Fix M503 output for M145
...
Fixes #7978
7 years ago
0918dae66e
Add OV() macro for use in thermistor tables
7 years ago
24057270a3
Merge pull request #8420 from RowanMeara/rm-dithering-2.0.x
...
[2.0.x] Fix Software Fan PWM
7 years ago
5079a02c90
Add HAL_SERVO_LIB to HAL_Due.h
7 years ago
9c3761047e
Merge pull request #8434 from thinkyhead/bf2_fix_M32_subroutines
...
[2.0] Fix 'M32 P' subroutines
7 years ago
e0d367f1fb
Fix M32 P subroutine handling
7 years ago
9f8b4c5ee8
Patch SD lib files for readability
7 years ago
2c8c30437e
Fix parser parameter value handling
7 years ago
6131533157
Change dithering behavior to intended.
7 years ago
e70b44dc0b
Make sure leveled[] is defined for later use
7 years ago
54774841ba
Merge pull request #8416 from thinkyhead/bf2_M114_DETAIL
...
[2.0] Add M114_DETAIL to Configuration_adv.h
7 years ago
009e3a7aa7
Add M114_DETAIL to Configuration_adv.h
7 years ago
6d6c3b1e97
Fix up REPRAPWORLD_KEYPAD defines
7 years ago
3f0a982b8c
Move Filament Width Sensor to Configuration_adv.h
7 years ago
b76e173205
Move test extrusion options under G26
7 years ago
14ebedca27
Drop unused LARGE_FLASH option
7 years ago
b7feb53e8a
Support for Extrudrboard in Printrboard Rev.F
7 years ago
91baca6abb
Patches for compiler warnings/errors
7 years ago
2f73dec077
Apply native workspace fixes for G92, G53-59
7 years ago
04abd8d459
Improve and clarify M428 code
7 years ago
c009a990e4
[2.0.x] Fix some 8-bit Teensyduino compile warnings ( #8385 )
...
* Fix some 8-bit Teensyduino compile warnings
-Override Teensyduino legacy NOT_A_PIN 127 define
-some fixups for Printrboard_RevF pins
* Proper cleanup of Printrboard Rev.F pins
* Apply LCD fixes to Printrboard v1
7 years ago
e8e92f8969
No leveling data in M114 if no leveling is enabled
7 years ago
f5d210c35c
Fix report_current_position
7 years ago
faaae7a1b2
Provide more clearance for BL-Touch probe
7 years ago
06ee6584fd
Remove offsets from soft endstops, tool change
7 years ago
c938273bd5
Coding standard patch of M290
7 years ago
98c1265e3b
Disable laser power when PWM goes to 0
7 years ago
d4a1154c25
Use do_blocking_move_to where possible
7 years ago
36426af564
Merge pull request #8356 from tcm0116/2.0.x-M600
...
[2.0.x] Normalize load/unload length in M600
7 years ago
1ed86adf9c
Cleanup around updatePID
7 years ago
75a58ee4b8
Fix position_is_reachable bug in waiting
7 years ago
e334efb2a7
PROBE_MANUALLY etc.
7 years ago
b6415dc169
finish
7 years ago
0efa66be0b
Updates to Traditional Chinese
...
From @cheton at #8347
7 years ago
cba9c1cf9e
Add pre-calculated planner.e_factor
7 years ago
600c85226e
Normalize load/unload length in M600
7 years ago
81b91b3f9d
Clean up some trailing white-space
7 years ago
2f9848ede3
Correct gMax 1.5+ example file
...
And... Keep both branches in synchronization.
7 years ago
006dad4b52
Add pins_RURAMPS4D.h & change pins.h
...
http://3dtoday.ru/blogs/svs0724/ruramps4d-ramps-for-adruino-due-the-pilot-shipment-available-for-zack/
7 years ago
00514857e9
SBASE serial port -1, RAMPS spacing
7 years ago
c66696c507
Merge pull request #8344 from tcm0116/2.0.x-delta_height
...
[2.0.x] Add delta_height variable in lieu of using home_offset
7 years ago
22e18fe832
Patch _manual_goto_xy for kinematics
7 years ago
0cfb936dd1
Clarify some motion code
7 years ago
f34c3597dc
Add delta_height variable in lieu of using home_offset
7 years ago
d47fbf791b
Arduini IDE compatibility changes
...
changed includes to make Arduino IDE happy
7 years ago
95ea43bde4
Update XYZ dual stepper configurations
7 years ago
b0b4a20930
Tweaks to core motion code
7 years ago
8805e24cc7
Fix tilt_mesh_based_on_probed_grid output bug
7 years ago
24437fbb13
Fix G26 Y argument bug
7 years ago
09b05c9d79
Merge pull request #8321 from Bob-the-Kuhn/pins_re-arm
...
2.0.x - pins_RAMPS_RE_ARM.h - add mega2560 pin numbers
7 years ago
e6788bb6ae
Fix get_destination_from_command for E
7 years ago
967104e1ce
Default Extrusion Settings were off a few lines in some of the example config files. ( #8333 )
7 years ago
8875885a15
pins add old names
...
fix typo
re-write PWM section, add "not on Re-ARM" list
7 years ago
1c6e83c137
if !HAS_MESH we still need to do some motion! ( #8328 )
...
* if !HAS_MESH we still need to do some motion!
Thank You MagoKimbra !
* Ooops.... need #else and not #elif
7 years ago
82f45c3e6a
Patch G33 misuse of PROBE_MANUALLY
7 years ago
064e6fe60e
Remove debugging pin toggle from LCD code
7 years ago
0483a7df91
AVR RRD works
...
LPC1768 VIKI2 & RRDFG are working
looks like all SPIs are working
library change
sh1106 locks up
fixed lockup, started I2C SW com
pretty
re-org
restore a few files
make library happy
switched HAL version of rrd
fix travis error
travis error fixes
another travis fix
cleanup
minor update
one more
correct spacing in platformio.ini
7 years ago
96c9d715f3
Patch abuse of sprintf_P in G33
7 years ago
ed62c621d7
Fix G26 Circle Drawing. Add Default Extrusion Settings ( #8313 )
...
- Fix G26 Circle Drawing.
- Add default extrusion settings so machine can print lines on print bed
- Yet to be done: Get LCD Menu's to use these settings.
7 years ago
8fea26aa9d
Fix PID_autotune watch temp increase value
7 years ago
2c099fd4c2
Update Thermal Protection Documentation
7 years ago
a6160916b0
[2.0] Fix M48 for delta printers/ABL compile issue ( #8286 )
...
* fix M48 for delta printers
fix M48 for delta printers. home printer if not already homed.
* remove ENABLED(DELTA)
remove ENABLED(DELTA) as it is not needed.
* Update M48.cpp
* abl needs queue.h
without queue.h abl will not compile since there is a script that runs at the end of it and we need to queue it up.
7 years ago
17ef0a513b
Update G92 for native workspace
7 years ago
b4bf8928aa
German language updates
...
Corresponding to #8306
7 years ago
73ca5345e1
Fix Delta EEPROM
7 years ago
714d2b9bbc
Merge pull request #8297 from thinkyhead/bf2_M118_and_others
...
[2.0] Fix M118, compiler warnings, etc.
7 years ago
83555933aa
Add platformio support for stm32 ( #8246 )
...
[2.0] Add platformio support for stm32
7 years ago
85a62bbf46
Misc. fixes to compiler warnings, etc.
7 years ago
e6aba99f16
Fix M118 parameters, with strict guideline
7 years ago
e9b1944a67
Patch non-extended font option
7 years ago
6324b09934
Revert "Fix EEPROM crc ( #8284 )" ( #8292 )
...
This reverts commit 172c36f517
7 years ago
172c36f517
Fix EEPROM crc ( #8284 )
7 years ago
cc4d28b73c
Update bilinear for native workspace
7 years ago
94c7205d64
Merge pull request #8281 from thinkyhead/bf2_alligator_dac
...
[2.0] Use fastio for Alligator dac084s085, etc.
7 years ago
2246316605
Fix name collision. timer_t => hal_timer_t
7 years ago
4efaef7039
[2.0.x] Fix archim2 SSDS define ( #8278 )
...
* Fix SSDS define
* Update pins_ARCHIM2.h
7 years ago
c8dfa26bc8
Use fastio for STM32F1 endstop interrupts
7 years ago
185dec800b
Use fastio for HAL SPI EEPROM
7 years ago
297666ea14
Use fastio for Alligator dac084s085
7 years ago
c5d95d318b
Merge pull request #8249 from thinkyhead/bf2_nozzle_cleanup
...
[2.0] Cleanup Nozzle class, fix XY vs Z move order
7 years ago
7e2fee9d56
Merge pull request #8274 from tcm0116/2.0.x-re_arm_D8
...
[2.0.x] Correct RAMPS_D8_PIN for Re-ARM
7 years ago
59c558d612
Merge pull request #8275 from GMagician/2.0.x-Typo-fix
...
[2.0.x] typo fix (removed spaces)
7 years ago
be73d5cc08
Cleanup Nozzle class, fix XY vs Z move order
7 years ago
9e93b7ccbd
[2.0.x] removed spaces
...
Removed spaces in array declaration
7 years ago
b91a822d7a
Correct RAMPS_D8_PIN for Re-ARM
7 years ago
d295f984e3
Update fwretract.cpp
7 years ago
1b40e9c464
Implement CNC_COORDINATE_SYSTEMS
7 years ago
1b42fba39b
Add CNC_COORDINATE_SYSTEMS to configs
7 years ago
a22434508f
Match tweaks to G33 from 1.1
7 years ago
c07bbd4154
Prettify some EEPROM code
7 years ago
d6aa127c76
Remove I2CPEM workspace offset
7 years ago
79772219ae
Fix Fan Multiplexer init
7 years ago
ca7d36d9ed
RAMPS pins for ANET_KEYPAD_LCD
7 years ago
e0a6ee8da5
[2.0] Fix up G33, LPC1768 + SDCARD_SORT_ALPHA ( #8250 )
...
* Update Conditionals_post.h
* Add a cast to round() to convert to a unsigned int
Add's a cast to round() so that it will compile properly. round() returns a float which must be cast to a integer for the following % operation. Use a unsigned int as a negative index to an array is wrong. Should never be more than 255 points allowing us to use a 8 bit cast.
* Update G33.cpp
7 years ago
dac1f6fe74
Tweaks to cubic_b_spline code style
7 years ago
4df024d7b9
Merge pull request #8234 from thinkyhead/bf2_native_operation
...
[2.0.x] Operate in Native Machine Space
7 years ago
601ccded89
Fix case-insensitive config issue
7 years ago
f8393a0908
Operate in Native Machine Space
7 years ago
d83a9a53e8
Merge pull request #8220 from thinkyhead/bf2_serial_port_-1
...
[2.0] Add SERIAL_PORT -1 option for configurators
7 years ago
93ba72ea83
Add SERIAL_PORT -1, set on SBASE, STM32F103RET6
7 years ago
7e43dd1d23
Fix probes configuration url
...
Based on #8241 by @machaj
7 years ago
ca0e4b4e96
Some cleanup around 'lcd_bootscreen()' and 'lcd_kill_screen()'
...
Move 'lcd_bootscreen()' from `lcd_init()` to 'setup()' where it is cexecute exactly once. Saves 'bool show_bootscreen'.
Move the call of 'lcd_custom_bootscreen()' to the begin of 'lcd_bootscreen()'.
Move the delays into the related functions.
Move the picture loop around 'lcd_kill_screen()' into the function.
7 years ago
84b93d941f
Merge pull request #8178 from thinkyhead/bf2_config_tweak
...
[2.0.x] Faster menu navigation for Anet A8
7 years ago
70be4d206e
[2.0.x] UltiMachine Archim2 ( #8190 )
...
* UltiMachine Archim2 support
* SPI gets included by the library
* Invert TMC2130 diag pin state
* Clean up Archim2 pins
* Update Archim2 config
* FAN2 -> FAN1
* Cleanup
* Add brief Archim installation instructions
* Bring pins into compliance
* Update 1.0 SD Detect pin for 1.1
* Update Configuration.h
* Update pins_ARCHIM2.h
7 years ago
f3deb37bdf
Merge pull request #8236 from thinkyhead/bf2_protect_M303
...
[2.0.x] M303 thermal runaway protection
7 years ago
31f112cf58
Cleanup trailing whitespace
7 years ago
2f9e42feb9
M303 thermal runaway protection
7 years ago
e5ae545647
Remove ADCKey steps acceleration
7 years ago
6827e243a0
[2.0.x] G33 magic numbers ( #8171 )
...
* [2.0.x] G33 magic numbers
* oops
* Comments
* oops
* warning
* better comment section
* remarks
* extra grids
7 years ago
8735ae984b
Merge pull request #8227 from tcm0116/2.0.x-pin_mapping
...
LPC1768: updates to use the new pin_t typedef
7 years ago
c72a0610b4
Fix watchdog in WATCHDOG_RESET_MANUAL mode AVR
7 years ago
13d839795c
LPC1768: updates to use the new pin_t typedef
7 years ago
eb13b8d985
Add MKS Gen L board
7 years ago
063e957fc4
Update pins_MKS_SBASE.h ( #8188 )
...
* Update pins_MKS_SBASE.h
Deleted E_MUX2, not used.
Changed #define LCD_PINS_D4 P0_14 // EXP1.5 to #define LCD_PINS_D4 P0_15 // EXP1.5, wrong in MKS's pinout schematic.
Swapped TEMP_BED_PIN and TEMP_0_PIN port's, request from user, more logical...
* Update pins_MKS_SBASE.h
Moved MUX signals to J8 and re added MUX2, cleaner wiring..
7 years ago
f7133e53fd
Fix case light off
...
Addressing #8205
7 years ago
0108d5181f
Allow asterisks in G-Code commands
...
Addressing #6655
7 years ago
34745b2183
Organize boards.h by architecture
7 years ago
9cc1d8e312
[2.0.x] Support for SilverGate Board
7 years ago
03e5369411
Faster menu navigation for Anet A8
...
Addressing #8166
7 years ago
f1edf83720
Merge pull request #8187 from rafaljot/patch-5
...
Update InterruptVectors_Due.cpp
7 years ago
b2bd77c40a
Merge pull request #8191 from thinkyhead/bf2_rearm_more
...
[2.0.x] Add SDCARD_SORT_ALPHA options for LPC1768
7 years ago
571ced712d
Add SDCARD_SORT_ALPHA options for LPC1768
7 years ago
778e4e4c23
Update InterruptVectors_Due.cpp
...
const pfnISR_Handler *isrtab = get_relocated_table_addr();
What compiler do you use? Arduino 1.8.5 can't compile this "const".
7 years ago
cae8703e0d
Merge pull request #8181 from thinkyhead/bf2_fix_bootscreen_repeat
...
[2.0.x] Only show custom bootscreen once
7 years ago
a516856df9
Only show custom bootscreen once
7 years ago
727a403ba1
[2.0.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour ( #8176 )
...
* [2.0.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour
NO_MOTION_BEFORE_HOMING should prevent XYZ movements only when homing is not done.
E axes should be allowed
* Update G0_G1.cpp
* Update G0_G1.cpp
7 years ago
577659cacf
Basic support for Azteeg_X5_GT ( #8139 )
...
* Basic support for Azteeg_X5_GT
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
* Add fan pins for AZTEEG X5 GT
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
* Fix endstop pins
* Add servo0 pin
7 years ago
0b02f9cc33
Merge pull request #8168 from thinkyhead/bf2_config_tweak
...
[2.0.x] Apply Re-ARM SPI review items
7 years ago
04c0d9f3c3
Implement kinematic software endstops
7 years ago
9f89b5d876
Fix for MAX_VFAT_ENTRIES sanity check
7 years ago
2cdde08339
Apply items specified in code review
...
Followup to #8122
7 years ago
34be5d33c0
The plural of 'axis' is 'axes'
7 years ago
6e5f13a5c2
Merge pull request #8122 from Bob-the-Kuhn/2.0.x-restore-Re-ARM-RepRap-Discount-Full-Graphics-fix-(partial-solution)
...
2.0.x - Restore fix for garbaged display on Re-ARM with RepRap Full Graphics Smart Controller
7 years ago
b7a66742dd
tested
...
add sort alpha section to other LPC1768 boards
7 years ago
bbc2e66634
Fix AZSMZ MINI pins for new LPC1768 pinmapping
7 years ago
31e96935f7
Fix EXTRA_FAN_SPEED
...
Addressing #8158
7 years ago
c94dce6b32
Merge pull request #8113 from thinkyhead/bf2_fixup_sd_reprint
...
[2.0.x] Cleanup after SD Print Again, whitespace, tabs
7 years ago
ce1c9c0808
Tweak QUICK_HOME description
7 years ago
12458cefc4
Remove 5s timer hack. Encoder pos is saved on print start!
7 years ago
9a4cf11835
Remove return_to_status_ms hack, just use defer...
7 years ago
8949c8c0a5
Move SD_REPRINT_LAST_SELECTED_FILE to ultralcd.cpp
7 years ago
817175613a
Merge pull request #8157 from thinkyhead/bf2_anet_10_servo
...
[2.0.x] Define a default SERVO0_PIN for Anet 1.0
7 years ago
723f2a77f6
Implement support for Dual X and Y endstops
7 years ago
e04425281d
Add Dual Steppers / Endstops to configs
7 years ago
edff2c917b
Cleanup for DIGIPOTS settings
7 years ago
3e8754a38a
Add/correct time units on planner vars / M205 B
7 years ago
b2a48f1a04
Provide a SERVO0_PIN for non-standard LCD
7 years ago
b232f39341
AVR: Hidden option to use 8s watchdog
7 years ago
9d4cfd2013
Merge pull request #8142 from thinkyhead/bf2_fix_m303
...
[2.0.x] Fix M303 thermal protection
7 years ago
eae0aea1e0
Fix M303 thermal protection
7 years ago
a1a4fc277e
(2.0.x) serious bug G33 ( #8136 )
...
* (2.0.x) serious bug G33
* Revert config changes
This reverts commit 74b5a98223b7b7fb970d05b8541f4a079c3cfe56.
7 years ago
325233b454
Fix automatic stepper assignment for X/Y/Z dual stepper drivers ( #8130 )
7 years ago
50b4f9cbf7
LPC1768 Pin Mapping and M43 cleanup ( #8119 )
...
* LPC1768 M43 cleanup
* Update pinmapping.h to #define pins
7 years ago
6b1d1a818b
Revert default BABYSTEP_MULTIPLICATOR to 1
7 years ago
ba8dc678f5
Arduino Due XON/XOFF implementation
...
Alos includes emergency parser and configurable TX/RX buffers for Arduino Due.
7 years ago
8d9c3cc2b7
Add a module for Due SRAM-based Interrupt Vector Table
...
This is the ONLY way to be able to override ISRs stolen by the Arduino Runtime, such as Serial or USB device interrupts. This feature is needed so Arduino modules can be replaced and enhanced.
7 years ago
c9bbef6380
Cosmetic fix for HAL_AVR/MarlinSerial.cpp
...
Instead of using const char, it is better to use uint8_t
7 years ago
dcfc2503c2
G33 Autotune calibration update #10
7 years ago
b338cafc65
Merge pull request #8111 from thinkyhead/bf2_fwretract_fix_oct26
...
[2.0.x] Improved Firmware Retraction logic
7 years ago
ada90f7335
Clean up trailing spaces
7 years ago
7fad26549b
Concise SD_REPRINT_LAST_SELECTED_FILE description
7 years ago
33f379fe88
Add some Polish language
...
Thanks @SCiunczyk
7 years ago
daeff5a11a
Tweak neopixel self-test
7 years ago
0ceec1f166
Fix leveling_active_at_z warning
7 years ago
eb02f8c719
Improve FWRETRACT logic, add common sense
7 years ago
bd78ca0ee3
Add M290 Babystepping
7 years ago
ce5f0ec85a
Bring STM32 example config up to date
7 years ago
46e9eae159
Tweak to M100 config comment
7 years ago
c45514f811
Merge pull request #8094 from thinkyhead/bf2_neopixel_led_parity
...
[2.0.x] Bring NEOPIXEL_LED into parity with 1.1.x
7 years ago
229a27a1c7
save FLASH by using reduced font for some languages
7 years ago
3f5f39576b
Reprint option for last SD Memory card file ( #8106 )
...
* Re-Print of same SD Memory Card file with single click
* Re-Print of same SD Memory Card file with single click
* This is the bugfix-v2.0.0 version of https://github.com/MarlinFirmware/Marlin/pull/8104
7 years ago
9e699811d2
Make LPC1768 pinmapping not specific to Re-ARM ( #8063 )
...
* Merging early because of build failures. See #8105
* Make LPC1768 pinmapping not specific to Re-ARM
* Add HAL_PIN_TYPE and LPC1768 pin features
* M43 Updates
* Move pin map into pinsDebug_LPC1768.h
* Incorporate comments and M226
* Fix persistent store compilation issues
* Update pin features
* Update MKS SBASE pins
* Use native LPC1768 pin numbers in M42, M43, and M226
7 years ago
3ac581eac9
Neopixel changes for parity with 1.1.x
7 years ago
7b3098bbd5
Add AZSMZ Mini ( #8005 )
...
* Add AZSMZ Mini
* Remove tabs, adjust spacing
* Renumber boards to group by family
* Patch up spacing
* Tweak
7 years ago
e00ed10c4c
GT2560 config MKS_MINI_12864 => SDSUPPORT
7 years ago
10a5e4d80f
Merge pull request #8078 from thinkyhead/bf2_mks_mini_lcd
...
[2.0.x] Add MKS MINI 12864 support to GT2560
7 years ago
ee9b8bf0f1
Add MKS MINI 12864 support to GT2560
7 years ago
f65fc7ffab
Merge pull request #8044 from thinkyhead/bf2_mesh_consolidate
...
[2.0.x] Simplify mesh bounds config
7 years ago
070cd34fe8
Merge pull request #8077 from thinkyhead/bf2_MKS_BASE_followup
...
Clean up HAL trailing spaces, MKS SBASE pins
7 years ago
7f55d82fd1
Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h
7 years ago
90a14b4f5b
Clean up HAL trailing spaces, MKS SBASE pins
7 years ago
51fafccc16
[2.0.x] Enable hardware serial ports on LPC1768 ( #8004 )
...
* Enable hardware serial ports on LPC1768
* Fix compilation errors with other HALs
* FIx order of includes in LPC1768 HAL main.cpp
* Add support for RX_BUFFER_SIZE and TX_BUFFER_SIZE options in Configuration_adv.h
7 years ago
580b6e9089
Apply physical limits to mesh bounds
7 years ago
4e2baeb3e1
Update indentation, file-wrapping for Marlin 2.0.x
7 years ago
60af705e6d
Relocate SPI.h to the HAL folder
7 years ago
46aae4c6e7
Merge pull request #8074 from thinkyhead/bf2_verbiage_like_8061
...
Fix some config verbiage
7 years ago
3356d5a72d
Merge pull request #8072 from thinkyhead/bf2_fix_M600
...
[2.0.x] Fix position sync in M600 pause/resume
7 years ago
5f87324536
Fix some config verbiage
7 years ago
272f9f65dc
Fix some typos
7 years ago
8181220bfd
Fix position sync in M600 pause/resume
7 years ago
6296ab2173
Add GFX overlay to UBL mesh edit ( #8038 )
...
* Add GFX overlay to UBL mesh edit
Fixed misplaced HAS_TEMP_BED in dogm_bitmaps.h
rename _lcd_babystep_zoffset_overlay to _lcd_zoffset_overlay_gfx and move it out of BABYSTEP_ZPROBE_OFFSET to we can use it for over things. Add this function into UBL mesh edit screen.
update all Configuration.h to add ENABLE_MESH_EDIT_GFX_OVERLAY
* Add Sanity to UBL insanity
Need to check for DOGLCD otherwise error out.
7 years ago
72156a2029
change to better (more clear) names ( #8050 )
...
set_destination_to_current() changed to set_destination_from_current()
set_current_to_destination() changed to set_current_from_destination()
7 years ago
0cb423b5b3
Apply consistency for other configs
7 years ago
8c78f8f790
Add Makeboard MINI for Micromake C1
7 years ago
1fbb307aaf
Merge pull request #8021 from thinkyhead/bf2_scroll_longnames
...
[2.0.x] Add SCROLL_LONG_FILENAMES to reveal longer filenames
7 years ago
3d2b2eb1ca
Prevent SDCARD_SORT_ALPHA from exploding
7 years ago
783ddf9691
Add SCROLL_LONG_FILENAMES option
7 years ago
5439358281
Basic UBL operations working on 32-bit platforms ( #8024 )
...
* 32-bit work for UBL
* Update FT i3-2020 reference file
7 years ago
9e5cbf0198
BQ should set this in its config, and does
7 years ago
348e5e3109
Simplify Cartesian probing boundaries
...
Followup to #8012
7 years ago
3986a84f77
boolval revisited ( #8016 )
7 years ago
572cf0ec95
UBL able to generate mesh and save and load it on 32-bit platforms ( #8015 )
...
* Get UBL Mesh Generation, Mesh Save & Mesh Load working with 32-Bit platforms
* clean up read_data() and write_data() for non-LPC1768 HAL's
* Get read_data() and write_data() return codes consistent
All HAL's read_data() and write_data() return false if they succeed.
* Get read_data() and write_data() return codes to be consistent
Make read_data() and write_data() return true if an error happens.
* Say UBL is now checked out on machine types in default Configuration.h file.
7 years ago
67cc29cd3c
Update UBL mesh boundaries to accomidate beds centered at 0, 0 ( #8012 )
7 years ago
6cb26c98c8
Fix Baby Stepping on 32-Bit platforms ( #8001 )
...
Also, Max7219 debug code was used for this effort. It has been
improved and hardened.
7 years ago
3b7b0492f8
Merge pull request #7993 from jeffyl/bugfix-2.0.x
...
[2.0.x] Proper support for AZSMZ 12864 LCD on SmartRAMPS
7 years ago
26531f2715
Add lcd to all sample configs
7 years ago
ce48403a0b
Add EXTRA_FAN_SPEED feature
...
Based on #7883 by @studiodyne
7 years ago
eeb4611606
Add proper support for the AZSMZ 12864 LCD on a SMART RAMPS
7 years ago
c46189e429
Fix UBL+Delta segmented feedrate
...
Based on #7948
7 years ago
5c4f3e0107
Add LCD_SET_PROGRESS_MANUALLY
7 years ago
014a83fe09
Merge pull request #7984 from thinkyhead/bf2_micromake_c1
...
[2.0.x] Micromake C1 Configurations, Unaccented French
7 years ago
bc7df0188e
Add Micromake C1 configurations
7 years ago
34a261416f
Add unaccented French language
7 years ago
e587f0893c
Define AVR_ATmega2560_FAMILY_PLUS_70 in Conditionals
7 years ago
fd128b3c93
Fix some AVR HAL code style
7 years ago
799360c576
Enhance Teensy/RAMPS pins files
7 years ago
d3e5a22a5d
Add MIN_SOFTWARE_ENDSTOP_[XYZ] to example configs
7 years ago
b206f70693
Split the software endstop capability by axis.
7 years ago
ec69e97bda
Merge pull request #7974 from jeffyl/bugfix-2.0.x
...
Fix include path for VIKI
7 years ago
91e28edda6
[2.0.x] Add new board: MKS Sbase ( #7945 )
...
* Add files via upload
* Add files via upload
* Add files via upload
* Checked LCD / edited / revised pins_MKS_BASE.h
As requested :)
* Delete Configuration_adv.h
* Delete Configuration.h
* Deleted /Marlin/Marlin/src/config/examples/MksSbase/*.* and moved them to /Marlin/Marlin/src/config/examples/Mks/Sbase/*.*
* Add files via upload
7 years ago
3c8a3a02ba
Fix include path for VIKI
7 years ago
4586acad8c
Merge pull request #7959 from alexxy/bugfix-2.0.x
...
Python isnt always python2
7 years ago
497f86453e
Merge pull request #7964 from gallynero/patch-2
...
fix 'axis_unhomed_error' not defined error
7 years ago
c0dddd4233
Tweaks to tool_change, GcodeSuite::T()
7 years ago
ca66574062
ADC sensor fix inspired by 'Evgen2' on Twitter
7 years ago
1344ca4b2f
UBL no longer needs ubl_state
7 years ago
8dd08425fd
Improve LCD leveling edits
7 years ago
3e3911fb81
Use planner.leveling_active for all leveling systems
7 years ago
32c607ffe2
Ensure fade factor is recalculated if fade height changes
7 years ago
ca1e47375c
Move fade_scaling_factor_for_z to Planner
7 years ago
9a930ebec2
Make leveling_is_active a macro
7 years ago
58abc66c1d
Tweak bed leveling conditionals
7 years ago
1adb5a6a48
Remove obsolete UBL z_offset
7 years ago
3619a4cbea
fix 'axis_unhomed_error' not defined error
...
Fix 'axis_unhomed_error' not defined error when pause with unhomed status
7 years ago
12d212d1b4
Python isnt always python2
...
So now this script is compatible with both python versions 2 and 3
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
7 years ago
cc01a36363
Merge pull request #7947 from thinkyhead/bf2_more_READMEs
...
[2.0.x] Add a README.h file for Arduino IDE users
7 years ago
4764710b11
Add a README.h file for Arduino IDE users
7 years ago
4e3ee845b9
config_adv ( #7941 )
...
get rid of twi.h
move to board files
7 years ago
0e260c6c1d
Get FolgerTech i3-2020 working again with 32-bit platforms ( #7944 )
...
Setup FolgerTech i3-2020 Configuration files as a reference platform for
32-Bit work.
Also fix MAX7219 debug lights on 32-bit platforms.
7 years ago
26bfae58d4
MPC4451 I2C support
7 years ago
1f5c432e29
Merge pull request #7920 from thinkyhead/bf2_neopixel_full
...
[2.0.x] Move FILAMENT_RUNOUT_SENSOR to a feature
7 years ago
732e87e83c
Merge pull request #7892 from GMagician/Serial-double-echo-fix
...
[2.0.x] Serial double echo fix
7 years ago
f8e8fcb978
Move FILAMENT_RUNOUT_SENSOR to a feature
7 years ago
a11e6a1022
Different NEOPIXEL types
...
Same as #7728 but for 2.0.x,
Lot of cleanup and remove references in whole code to other "LED files" than leds.h. Now will be much easier to add next drivers/libraries. e.g. FastLED. But bad news, currently FastLED is suporting only RGB devices (no RGBW)
7 years ago
b30b55307c
Merge pull request #7909 from thinkyhead/bf2_goodbye_legacy_advance
...
[2.0.x] Remove legacy ADVANCE feature
7 years ago
1d04197f2f
Merge pull request #7916 from thinkyhead/bf2_probeless_ubl
...
[2.0.x] Allow UBL G29 and G26 to build without a probe
7 years ago
9b0ee53b12
Use segmented moves when moving axis from LCD
7 years ago
442669d23c
Allow UBL to build without a probe
7 years ago
20ebe218c8
Tweaks to VIKI lcd support
7 years ago
09fa34a9e1
Modernize configs
7 years ago
560d366b80
Move VIKI SCK/MOSI pins fix to Conditionals_POST.h
7 years ago
e9bcb9d048
Add 4 new LCD displays
7 years ago
03f4891fb9
Remove legacy ADVANCE feature
7 years ago
546f02c6f4
[2.0.x] Addressing #7896
...
Compiler error, added char c variable
7 years ago
eb96d37da0
Serial double echo fix
...
Fix double character sent when TX buffer size is 0 on mega2560
7 years ago
deeea98d22
LCD filename already concatenated
7 years ago
a058638d11
Merge pull request #7875 from thinkyhead/bf2_fill_eeprom_dat_ff
...
[2.0.x] Update LPC persistent store to initialize eeprom.dat with FF
7 years ago
ae1a18d0a1
LCD filename already concatentated
7 years ago
12aa1b999a
Fix display issue with SD_SORT_ALPHA cached names
7 years ago
9d0e4ea3d5
[2.0.x] Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled ( #7879 )
...
* Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled
If HOME_AFTER_DEACTIVATE, there is no need to warn on LCD since printer will home prior to starting print. Saves 60 bytes PROGMEM on AVR with U8g panel.
* Reduce lines used
* Reduce lines used
7 years ago
8315a8a716
Apply fixes for DUE
...
Alternative to #7882 . If F_CPU is greater than 1000 it can be evenly divided by 8. Over 10000, 16; over 100000, 32; over 1 million, 64; etc.
7 years ago
4b36a542e0
Merge pull request #7876 from thinkyhead/bf2_hotend_messages
...
[2.0.x] Addressing #7612
7 years ago
12730c1303
[2.0.0] Resolve USE_CONTROLLER_FAN compile errors
...
Add to controllerfan.cpp:
#include "../module/stepper_indirection.h"
#include "../module/temperature.h"
7 years ago
7fb3343bda
[2.0.x] Addressing #7612
...
Change "extruder" to HOTEND in sanity error messages
7 years ago
Scott Lahteine