microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

Merge pull request #9188 from thinkyhead/bf2_creality_ender

Browse Source 
[2.0.x] Add Creality Ender config/board
2.0.x
Scott Lahteine 7 years ago committed by GitHub
parent d743d96886 2038722c52
commit f4e4c7a7c8
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
16 changed files with 3600 additions and 16 deletions
Show Stats Download Patch File Download Diff File

3
Marlin/src/Makefile
Unescape Escape View File

@ -176,6 +176,9 @@ MCU ?= atmega1284p
else ifeq ($(HARDWARE_MOTHERBOARD),69)
HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega1284p
else ifeq ($(HARDWARE_MOTHERBOARD),601)
HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega1284p
#Ultimaker
else ifeq ($(HARDWARE_MOTHERBOARD),7)

1781
Marlin/src/config/examples/Creality/Ender/Configuration.h
View File

File diff suppressed because it is too large Load Diff

1597
Marlin/src/config/examples/Creality/Ender/Configuration_adv.h
View File

File diff suppressed because it is too large Load Diff

18
Marlin/src/config/examples/Creality/Ender/README.md
Unescape Escape View File

@ -0,0 +1,18 @@
# Creality Ender Support
This branch is a reverse-engineered version based on the unpublished firmware from Creality. It is **not** the authoritative source, but has been carefully re-built by looking at their firmware and inferring the base version and configuration they used. The basis is the firmware version from "Jul 31 2017 10:16:30". It is based on Marlin 1.0.1, because
* 1.0.0 had very different serial output in `setup()` and overall code structure.
* 1.0.2 changed the `VERSION_STRING` to include a leading space, and `lcd_init` uses `SET_INPUT` instead of `pinMode`.
Configurations were found by seeing what code was compiled into the firmware, and constants used there.
For U8Glib, at least version 1.14 and at most 1.17 is used, because
* 1.12 didn't have the extra speed argument to u8g_InitCom.
* 1.13 didn't have the soft reset instruction for UC1701 initialization.
* 1.18 has a new directory structure.
## Bitmaps
The bootscreen and custom status screens come from Creality's firmware.

74
Marlin/src/config/examples/Creality/Ender/_Bootscreen.h
Unescape Escape View File

@ -0,0 +1,74 @@
#ifndef BOOTSCREEN_H_
#define BOOTSCREEN_H_
#define CUSTOM_BOOTSCREEN_TIMEOUT 1000 // milliseconds
#define CUSTOM_BOOTSCREEN_BMPWIDTH 128 // Width in pixels
#define CUSTOM_BOOTSCREEN_BMPHEIGHT 64 // Height in pixels
const unsigned char custom_start_bmp[] PROGMEM = {
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xEF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xEF,0xEF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE7,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE7,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE3,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF3,0xCF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE1,0xE1,0xCF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFE,0x78,0x00,0x00,0x03,0xDD,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFE,0xFF,0x80,0x7E,0x00,0x01,0xEE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFE,0x7D,0xCF,0xFC,0x00,0x00,0xF7,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0x8E,0x06,0x00,0x00,0x00,0x7B,0xBF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00,0x7D,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFC,0x01,0xFE,0x00,0x00,0x3E,0xE7,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,0x00,0x03,0x1F,0x73,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF8,0x00,0x01,0x8F,0x81,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE0,0x00,0x00,0x83,0xF9,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0xFC,0x00,0x00,0xF0,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xE0,0x0F,0xFF,0xC0,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFE,0x03,0xFF,0xFF,0xC0,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF9,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,0x00,0x07,0xC0,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x07,0xE0,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE0,0x07,0xF1,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,0x07,0xF9,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x03,0xF9,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x83,0xF9,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xC3,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE1,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,0xBF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFB,0xF8,0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF9,0xF8,0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x7E,0xF0,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x8E,0x03,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE0,0x1F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x7F,0xFF,0xFF,0xF8,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0x80,0x00,0x7F,0xFF,0xFF,0xE0,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xC3,0xFC,0xFF,0xFF,0xFF,0xF8,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xC3,0xFC,0xFF,0xFF,0xFF,0xF8,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0x87,0xFD,0xFF,0xFF,0xFF,0xF1,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0x87,0xFF,0xFF,0xFF,0xFF,0xF1,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0x0F,0xE7,0xF3,0x0F,0xFC,0x23,0xFC,0x3F,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0x0F,0xEF,0x80,0x07,0xF0,0x03,0xF0,0x1E,0x00,0x7F,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFE,0x1F,0xCF,0x81,0x87,0xC7,0x87,0xC7,0x0C,0x00,0x7F,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFE,0x00,0x1F,0xC7,0xC7,0x8F,0xC7,0x9F,0x0F,0x0C,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFE,0x00,0x1F,0x87,0x8F,0x1F,0x8F,0x1F,0x0F,0x1F,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFC,0x3F,0x9F,0x8F,0x8F,0x1F,0x8E,0x00,0x1E,0x3F,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFC,0x7F,0x3F,0x0F,0x1E,0x3F,0x1E,0x3F,0xFE,0x3F,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xF8,0x7F,0xFF,0x1F,0x1C,0x3F,0x1C,0x7F,0xFC,0x7F,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xF8,0xFF,0xFF,0x1E,0x1C,0x7E,0x1C,0x7F,0xFC,0x7F,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xF0,0xFF,0xCE,0x3E,0x3C,0x7E,0x3C,0x7F,0xB8,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xF0,0xFF,0x9E,0x3C,0x38,0x7C,0x38,0x7E,0x78,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xE1,0xFF,0x3C,0x7C,0x78,0x7C,0x78,0x3C,0xF1,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xE1,0xF8,0x38,0x78,0x78,0x10,0x18,0x01,0xF1,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0x00,0x00,0x60,0x20,0x3C,0x00,0x7C,0x07,0x80,0x7F,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0x1F,0xFE,0x1F,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
};
#endif // BOOTSCREEN_H_

54
Marlin/src/config/examples/Creality/Ender/_Statusscreen.h
Unescape Escape View File

@ -0,0 +1,54 @@
#ifndef STATUSSCREEN_H_
#define STATUSSCREEN_H_
#define STATUS_SCREENWIDTH 128 // Width in pixels
const unsigned char status_screen0_bmp[] PROGMEM = {
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x87,0x30,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x27,0x87,0x90,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
0x00,0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x03,0xD0,
0xFE,0x00,0x02,0x00,0x00,0x1F,0xE0,0x00,0x00,0x08,0x20,0x80,0x00,0x20,0x30,0x10,
0x42,0x00,0x02,0x00,0x00,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x20,0x78,0x10,
0x48,0x00,0x02,0x00,0x00,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x20,0x78,0x10,
0x48,0xDC,0x3E,0x3C,0xEE,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x20,0x30,0x10,
0x78,0x62,0x42,0x42,0x32,0x1F,0xE0,0x00,0x00,0x10,0x41,0x00,0x00,0x2F,0x03,0xD0,
0x48,0x42,0x42,0x42,0x20,0x1F,0xE0,0x00,0x00,0x20,0x82,0x00,0x00,0x2F,0x87,0xD0,
0x48,0x42,0x42,0x7E,0x20,0x3F,0xF0,0x00,0x00,0x20,0x82,0x00,0x00,0x2F,0x87,0xD0,
0x40,0x42,0x42,0x40,0x20,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x27,0x87,0x90,
0x42,0x42,0x46,0x42,0x20,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x33,0x87,0x30,
0xFE,0xE7,0x3B,0x3C,0xF8,0x0F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x3F,0xFF,0xF0,
0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00
};
const unsigned char status_screen1_bmp[] PROGMEM = {
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0xFC,0x30,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0xFC,0x10,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x78,0x10,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x30,0x10,
0x00,0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2C,0x00,0xD0,
0xFE,0x00,0x02,0x00,0x00,0x1F,0xE0,0x00,0x00,0x10,0x41,0x00,0x00,0x2E,0x31,0xD0,
0x42,0x00,0x02,0x00,0x00,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x2F,0x7B,0xD0,
0x48,0x00,0x02,0x00,0x00,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x2F,0x7B,0xD0,
0x48,0xDC,0x3E,0x3C,0xEE,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x2E,0x31,0xD0,
0x78,0x62,0x42,0x42,0x32,0x1F,0xE0,0x00,0x00,0x20,0x82,0x00,0x00,0x2C,0x00,0xD0,
0x48,0x42,0x42,0x42,0x20,0x1F,0xE0,0x00,0x00,0x41,0x04,0x00,0x00,0x20,0x30,0x10,
0x48,0x42,0x42,0x7E,0x20,0x3F,0xF0,0x00,0x00,0x41,0x04,0x00,0x00,0x20,0x78,0x10,
0x40,0x42,0x42,0x40,0x20,0x3F,0xF0,0x00,0x00,0x20,0x82,0x00,0x00,0x20,0xFC,0x10,
0x42,0x42,0x46,0x42,0x20,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x30,0xFC,0x30,
0xFE,0xE7,0x3B,0x3C,0xF8,0x0F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x3F,0xFF,0xF0,
0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00
};
#define STATUS_SCREEN_X 0
#define STATUS_SCREEN_HOTEND_TEXT_X(i) (39 + (i) * 25)
#define STATUS_SCREEN_BED_TEXT_X 72
#define STATUS_SCREEN_FAN_TEXT_X 103
#endif // STATUSSCREEN_H_

1
Marlin/src/core/boards.h
Unescape Escape View File

@ -115,6 +115,7 @@
#define BOARD_MELZI_MAKR3D 66 // Melzi with ATmega1284 (MaKr3d version)
#define BOARD_MELZI_CREALITY 89 // Melzi Creality3D board (for CR-10 etc)
#define BOARD_MELZI_MALYAN 92 // Melzi Malyan M150 board
#define BOARD_CREALITY_ENDER 601 // Creality Ender
#define BOARD_STB_11 64 // STB V1.1
#define BOARD_AZTEEG_X1 65 // Azteeg X1

22
Marlin/src/lcd/dogm/dogm_bitmaps.h
Unescape Escape View File

@ -115,7 +115,14 @@
// When only one extruder is selected, the "1" on the symbol will not
// be displayed.
#if HAS_TEMP_BED
#ifdef CUSTOM_STATUS_SCREEN_FILE
#undef STATUS_SCREENWIDTH
// This file must define STATUS_SCREENWIDTH and status_screen{0,1}_bmp.
// It can also define STATUS_SCREEN_X, STATUS_SCREEN_{BED,FAN}_TEXT_X and
// STATUS_SCREEN_HOTEND_TEXT_X(i) to modify draw locations.
#include CUSTOM_STATUS_SCREEN_FILE
#elif HAS_TEMP_BED
#if HOTENDS == 1
#define STATUS_SCREENWIDTH 115 //Width in pixels
#define STATUS_SCREENHEIGHT 19 //Height in pixels
@ -513,3 +520,16 @@
};
#endif // BABYSTEP_ZPROBE_GFX_OVERLAY || MESH_EDIT_GFX_OVERLAY
#ifndef STATUS_SCREEN_X
#define STATUS_SCREEN_X 9
#endif
#ifndef STATUS_SCREEN_HOTEND_TEXT_X
#define STATUS_SCREEN_HOTEND_TEXT_X(i) (5 + (i) * 25)
#endif
#ifndef STATUS_SCREEN_BED_TEXT_X
#define STATUS_SCREEN_BED_TEXT_X 81
#endif
#ifndef STATUS_SCREEN_FAN_TEXT_X
#define STATUS_SCREEN_FAN_TEXT_X 104
#endif

2
Marlin/src/lcd/language/language_en.h
Unescape Escape View File

@ -37,7 +37,7 @@
#undef en
#ifndef WELCOME_MSG
#define WELCOME_MSG MACHINE_NAME _UxGT(" ready.")
#define WELCOME_MSG MACHINE_NAME _UxGT(" Ready.")
#endif
#ifndef MSG_BACK
#define MSG_BACK _UxGT("Back")

13
Marlin/src/lcd/ultralcd_impl_DOGM.h
Unescape Escape View File

@ -324,7 +324,7 @@ void lcd_printPGM_utf(const char *str, uint8_t n=LCD_WIDTH) {
u8g.firstPage();
do {
u8g.drawBitmapP(offx, offy, START_BMPBYTEWIDTH, START_BMPHEIGHT, start_bmp);
u8g.drawBitmapP(offx, offy, (START_BMPWIDTH + 7) / 8, START_BMPHEIGHT, start_bmp);
lcd_setFont(FONT_MENU);
#ifndef STRING_SPLASH_LINE2
u8g.drawStr(txt1X, u8g.getHeight() - (DOG_CHAR_HEIGHT), STRING_SPLASH_LINE1);
@ -365,7 +365,6 @@ static void lcd_implementation_init() {
#elif ENABLED(LCD_SCREEN_ROT_270)
u8g.setRot270(); // Rotate screen by 270°
#endif
}
// The kill screen is displayed for unrecoverable conditions
@ -503,7 +502,9 @@ static void lcd_implementation_status_screen() {
if (PAGE_UNDER(STATUS_SCREENHEIGHT + 1)) {
u8g.drawBitmapP(9, 1, STATUS_SCREENBYTEWIDTH, STATUS_SCREENHEIGHT,
u8g.drawBitmapP(
STATUS_SCREEN_X, 1,
(STATUS_SCREENWIDTH + 7) / 8, STATUS_SCREENHEIGHT,
#if HAS_FAN0
blink && fanSpeeds[0] ? status_screen0_bmp : status_screen1_bmp
#else
@ -519,11 +520,11 @@ static void lcd_implementation_status_screen() {
if (PAGE_UNDER(28)) {
// Extruders
HOTEND_LOOP() _draw_heater_status(5 + e * 25, e, blink);
HOTEND_LOOP() _draw_heater_status(STATUS_SCREEN_HOTEND_TEXT_X(e), e, blink);
// Heated bed
#if HOTENDS < 4 && HAS_TEMP_BED
_draw_heater_status(81, -1, blink);
_draw_heater_status(STATUS_SCREEN_BED_TEXT_X, -1, blink);
#endif
#if HAS_FAN0
@ -531,7 +532,7 @@ static void lcd_implementation_status_screen() {
// Fan
const int16_t per = ((fanSpeeds[0] + 1) * 100) / 256;
if (per) {
u8g.setPrintPos(104, 27);
u8g.setPrintPos(STATUS_SCREEN_FAN_TEXT_X, 27);
lcd_print(itostr3(per));
u8g.print('%');
}

2
Marlin/src/pins/pins.h
Unescape Escape View File

@ -195,6 +195,8 @@
#include "pins_MELZI_CREALITY.h" // ATmega644P, ATmega1284P
#elif MB(MELZI_MALYAN)
#include "pins_MELZI_MALYAN.h" // ATmega644P, ATmega1284P
#elif MB(CREALITY_ENDER)
#include "pins_CREALITY_ENDER.h" // ATmega1284P
#elif MB(STB_11)
#include "pins_STB_11.h" // ATmega644P, ATmega1284P
#elif MB(AZTEEG_X1)

4
Marlin/src/pins/pins_BEAST.h
Unescape Escape View File

@ -21,7 +21,7 @@
*/
#if !defined(__STM32F1__) && !defined(__STM32F4__)
#error "Oops! Make sure you have an STM32F1/4 board selected from the 'Tools -> Boards' menu."
#error "Oops! Make sure you have an STM32F1/4 board selected from the 'Tools -> Boards' menu."
#endif
/**
@ -31,8 +31,6 @@
#define DEFAULT_MACHINE_NAME "STM32F103RET6"
#define BOARD_NAME "Marlin for STM32"
#define LARGE_FLASH true
// Enable I2C_EEPROM for testing
#define I2C_EEPROM

2
Marlin/src/pins/pins_CHITU3D.h
Unescape Escape View File

@ -31,8 +31,6 @@
#define DEFAULT_MACHINE_NAME "STM32F103RET6"
#define BOARD_NAME "Chitu3d Marlin"
#define LARGE_FLASH true
// Enable I2C_EEPROM for testing
//#define I2C_EEPROM

34
Marlin/src/pins/pins_CREALITY_ENDER.h
Unescape Escape View File

@ -0,0 +1,34 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Creality Ender pin assignments
*
* Applies to the following boards:
*
* Creality Ender-2
* Creality Ender-4
*/
#define BOARD_NAME "Creality Ender"
#include "pins_SANGUINOLOLU_12.h"

7
Marlin/src/pins/pins_SANGUINOLOLU_11.h
Unescape Escape View File

@ -114,7 +114,7 @@
#endif
#if MB(AZTEEG_X1) || MB(STB_11) || ENABLED(IS_MELZI)
#if MB(AZTEEG_X1) || MB(STB_11) || MB(CREALITY_ENDER) || ENABLED(IS_MELZI)
#define FAN_PIN 4 // Works for Panelolu2 too
#endif
@ -187,6 +187,11 @@
#define DOGLCD_CS 17
#define LCD_BACKLIGHT_PIN 28 // PA3
#elif MB(CREALITY_ENDER)
#define BEEPER_PIN 27
#define DOGLCD_CS 28
#else // !MAKRPANEL
#define DOGLCD_CS 29

2
Marlin/src/pins/pins_STM3R_MINI.h
Unescape Escape View File

@ -31,8 +31,6 @@
#define DEFAULT_MACHINE_NAME "STM3R Mini"
#define BOARD_NAME "Marlin for STM32"
#define LARGE_FLASH true
// Enable I2C_EEPROM for testing
#define I2C_EEPROM

Write Preview
Loading…
Cancel
Save