Default Extrusion Settings were off a few lines in some of the example config files. (#8333)

7 years ago · 967104e1ce
parent 1c6e83c137
commit 967104e1ce
18 changed files with 90 additions and 90 deletions
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@ -1685,6 +1685,11 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }

+// Servo deactivation
+//
+// With this option servos are powered only during movement, then turned off to prevent jitter.
+//#define DEACTIVATE_SERVOS_AFTER_MOVE
+
 /**
 * Default extrusion settings
 *
@ -1697,11 +1702,6 @@
 #define DEFAULT_HOTEND_TEMP        205.0    // (c)  Default nozzle temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.
 #define DEFAULT_BED_TEMP            60.0    // (c)  Default bed temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.

-// Servo deactivation
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
-//#define DEACTIVATE_SERVOS_AFTER_MOVE
-
 /**
 * Filament Width Sensor
 *
--- a/Marlin/src/config/default/Configuration.h
+++ b/Marlin/src/config/default/Configuration.h
@ -1685,6 +1685,11 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }

+// Servo deactivation
+//
+// With this option servos are powered only during movement, then turned off to prevent jitter.
+//#define DEACTIVATE_SERVOS_AFTER_MOVE
+
 /**
 * Default extrusion settings
 *
@ -1697,11 +1702,6 @@
 #define DEFAULT_HOTEND_TEMP        205.0    // (c)  Default nozzle temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.
 #define DEFAULT_BED_TEMP            60.0    // (c)  Default bed temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.

-// Servo deactivation
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
-//#define DEACTIVATE_SERVOS_AFTER_MOVE
-
 /**
 * Filament Width Sensor
 *
--- a/Marlin/src/config/examples/Anet/A8/Configuration.h
+++ b/Marlin/src/config/examples/Anet/A8/Configuration.h
@ -1693,6 +1693,11 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }

+// Servo deactivation
+//
+// With this option servos are powered only during movement, then turned off to prevent jitter.
+//#define DEACTIVATE_SERVOS_AFTER_MOVE
+
 /**
 * Default extrusion settings
 *
@ -1705,11 +1710,6 @@
 #define DEFAULT_HOTEND_TEMP        205.0    // (c)  Default nozzle temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.
 #define DEFAULT_BED_TEMP            60.0    // (c)  Default bed temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.

-// Servo deactivation
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
-//#define DEACTIVATE_SERVOS_AFTER_MOVE
-
 /**
 * Filament Width Sensor
 *
--- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
+++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
@ -1680,6 +1680,11 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }

+// Servo deactivation
+//
+// With this option servos are powered only during movement, then turned off to prevent jitter.
+//#define DEACTIVATE_SERVOS_AFTER_MOVE
+
 /**
 * Default extrusion settings
 *
@ -1692,11 +1697,6 @@
 #define DEFAULT_HOTEND_TEMP        205.0    // (c)  Default nozzle temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.
 #define DEFAULT_BED_TEMP            60.0    // (c)  Default bed temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.

-// Servo deactivation
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
-//#define DEACTIVATE_SERVOS_AFTER_MOVE
-
 /**
 * Filament Width Sensor
 *
--- a/Marlin/src/config/examples/Felix/Configuration.h
+++ b/Marlin/src/config/examples/Felix/Configuration.h
@ -1667,6 +1667,11 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }

+// Servo deactivation
+//
+// With this option servos are powered only during movement, then turned off to prevent jitter.
+//#define DEACTIVATE_SERVOS_AFTER_MOVE
+
 /**
 * Default extrusion settings
 *
@ -1679,11 +1684,6 @@
 #define DEFAULT_HOTEND_TEMP        205.0    // (c)  Default nozzle temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.
 #define DEFAULT_BED_TEMP            60.0    // (c)  Default bed temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.

-// Servo deactivation
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
-//#define DEACTIVATE_SERVOS_AFTER_MOVE
-
 /**
 * Filament Width Sensor
 *
--- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
+++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
@ -1682,6 +1682,11 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 500 }

+// Servo deactivation
+//
+// With this option servos are powered only during movement, then turned off to prevent jitter.
+//#define DEACTIVATE_SERVOS_AFTER_MOVE
+
 /**
 * Default extrusion settings
 *
@ -1694,11 +1699,6 @@
 #define DEFAULT_HOTEND_TEMP        205.0    // (c)  Default nozzle temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.
 #define DEFAULT_BED_TEMP            60.0    // (c)  Default bed temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.

-// Servo deactivation
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
-//#define DEACTIVATE_SERVOS_AFTER_MOVE
-
 /**
 * Filament Width Sensor
 *
--- a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
+++ b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
@ -1700,6 +1700,11 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }

+// Servo deactivation
+//
+// With this option servos are powered only during movement, then turned off to prevent jitter.
+//#define DEACTIVATE_SERVOS_AFTER_MOVE
+
 /**
 * Default extrusion settings
 *
@ -1712,11 +1717,6 @@
 #define DEFAULT_HOTEND_TEMP        205.0    // (c)  Default nozzle temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.
 #define DEFAULT_BED_TEMP            60.0    // (c)  Default bed temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.

-// Servo deactivation
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
-//#define DEACTIVATE_SERVOS_AFTER_MOVE
-
 /**
 * Filament Width Sensor
 *
--- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
+++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
@ -1689,6 +1689,11 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }

+// Servo deactivation
+//
+// With this option servos are powered only during movement, then turned off to prevent jitter.
+//#define DEACTIVATE_SERVOS_AFTER_MOVE
+
 /**
 * Default extrusion settings
 *
@ -1701,11 +1706,6 @@
 #define DEFAULT_HOTEND_TEMP        205.0    // (c)  Default nozzle temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.
 #define DEFAULT_BED_TEMP            60.0    // (c)  Default bed temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.

-// Servo deactivation
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
-//#define DEACTIVATE_SERVOS_AFTER_MOVE
-
 /**
 * Filament Width Sensor
 *
--- a/Marlin/src/config/examples/Malyan/M150/Configuration.h
+++ b/Marlin/src/config/examples/Malyan/M150/Configuration.h
@ -1713,6 +1713,11 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }

+// Servo deactivation
+//
+// With this option servos are powered only during movement, then turned off to prevent jitter.
+//#define DEACTIVATE_SERVOS_AFTER_MOVE
+
 /**
 * Default extrusion settings
 *
@ -1725,11 +1730,6 @@
 #define DEFAULT_HOTEND_TEMP        205.0    // (c)  Default nozzle temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.
 #define DEFAULT_BED_TEMP            60.0    // (c)  Default bed temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.

-// Servo deactivation
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
-//#define DEACTIVATE_SERVOS_AFTER_MOVE
-
 /**
 * Filament Width Sensor
 *
--- a/Marlin/src/config/examples/Mks/Sbase/Configuration.h
+++ b/Marlin/src/config/examples/Mks/Sbase/Configuration.h
@ -1660,6 +1660,11 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }

+// Servo deactivation
+//
+// With this option servos are powered only during movement, then turned off to prevent jitter.
+//#define DEACTIVATE_SERVOS_AFTER_MOVE
+
 /**
 * Default extrusion settings
 *
@ -1672,11 +1677,6 @@
 #define DEFAULT_HOTEND_TEMP        205.0    // (c)  Default nozzle temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.
 #define DEFAULT_BED_TEMP            60.0    // (c)  Default bed temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.

-// Servo deactivation
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
-//#define DEACTIVATE_SERVOS_AFTER_MOVE
-
 /**
 * Filament Width Sensor
 *
--- a/Marlin/src/config/examples/Sanguinololu/Configuration.h
+++ b/Marlin/src/config/examples/Sanguinololu/Configuration.h
@ -1716,6 +1716,11 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }

+// Servo deactivation
+//
+// With this option servos are powered only during movement, then turned off to prevent jitter.
+//#define DEACTIVATE_SERVOS_AFTER_MOVE
+
 /**
 * Default extrusion settings
 *
@ -1728,11 +1733,6 @@
 #define DEFAULT_HOTEND_TEMP        205.0    // (c)  Default nozzle temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.
 #define DEFAULT_BED_TEMP            60.0    // (c)  Default bed temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.

-// Servo deactivation
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
-//#define DEACTIVATE_SERVOS_AFTER_MOVE
-
 /**
 * Filament Width Sensor
 *
--- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
@ -1686,6 +1686,11 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }

+// Servo deactivation
+//
+// With this option servos are powered only during movement, then turned off to prevent jitter.
+//#define DEACTIVATE_SERVOS_AFTER_MOVE
+
 /**
 * Default extrusion settings
 *
@ -1698,11 +1703,6 @@
 #define DEFAULT_HOTEND_TEMP        205.0    // (c)  Default nozzle temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.
 #define DEFAULT_BED_TEMP            60.0    // (c)  Default bed temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.

-// Servo deactivation
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
-//#define DEACTIVATE_SERVOS_AFTER_MOVE
-
 /**
 * Filament Width Sensor
 *
--- a/Marlin/src/config/examples/Velleman/K8200/Configuration.h
+++ b/Marlin/src/config/examples/Velleman/K8200/Configuration.h
@ -1720,6 +1720,11 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }

+// Servo deactivation
+//
+// With this option servos are powered only during movement, then turned off to prevent jitter.
+//#define DEACTIVATE_SERVOS_AFTER_MOVE
+
 /**
 * Default extrusion settings
 *
@ -1732,11 +1737,6 @@
 #define DEFAULT_HOTEND_TEMP        205.0    // (c)  Default nozzle temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.
 #define DEFAULT_BED_TEMP            60.0    // (c)  Default bed temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.

-// Servo deactivation
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
-//#define DEACTIVATE_SERVOS_AFTER_MOVE
-
 /**
 * Filament Width Sensor
 *
--- a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
@ -1685,6 +1685,11 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }

+// Servo deactivation
+//
+// With this option servos are powered only during movement, then turned off to prevent jitter.
+//#define DEACTIVATE_SERVOS_AFTER_MOVE
+
 /**
 * Default extrusion settings
 *
@ -1697,11 +1702,6 @@
 #define DEFAULT_HOTEND_TEMP        205.0    // (c)  Default nozzle temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.
 #define DEFAULT_BED_TEMP            60.0    // (c)  Default bed temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.

-// Servo deactivation
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
-//#define DEACTIVATE_SERVOS_AFTER_MOVE
-
 /**
 * Filament Width Sensor
 *
--- a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
@ -1810,6 +1810,11 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }

+// Servo deactivation
+//
+// With this option servos are powered only during movement, then turned off to prevent jitter.
+//#define DEACTIVATE_SERVOS_AFTER_MOVE
+
 /**
 * Default extrusion settings
 *
@ -1822,11 +1827,6 @@
 #define DEFAULT_HOTEND_TEMP        205.0    // (c)  Default nozzle temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.
 #define DEFAULT_BED_TEMP            60.0    // (c)  Default bed temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.

-// Servo deactivation
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
-//#define DEACTIVATE_SERVOS_AFTER_MOVE
-
 /**
 * Filament Width Sensor
 *
--- a/Marlin/src/config/examples/makibox/Configuration.h
+++ b/Marlin/src/config/examples/makibox/Configuration.h
@ -1688,6 +1688,11 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }

+// Servo deactivation
+//
+// With this option servos are powered only during movement, then turned off to prevent jitter.
+//#define DEACTIVATE_SERVOS_AFTER_MOVE
+
 /**
 * Default extrusion settings
 *
@ -1700,11 +1705,6 @@
 #define DEFAULT_HOTEND_TEMP        205.0    // (c)  Default nozzle temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.
 #define DEFAULT_BED_TEMP            60.0    // (c)  Default bed temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.

-// Servo deactivation
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
-//#define DEACTIVATE_SERVOS_AFTER_MOVE
-
 /**
 * Filament Width Sensor
 *
--- a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h
+++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h
@ -1680,6 +1680,11 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }

+// Servo deactivation
+//
+// With this option servos are powered only during movement, then turned off to prevent jitter.
+//#define DEACTIVATE_SERVOS_AFTER_MOVE
+
 /**
 * Default extrusion settings
 *
@ -1692,11 +1697,6 @@
 #define DEFAULT_HOTEND_TEMP        205.0    // (c)  Default nozzle temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.
 #define DEFAULT_BED_TEMP            60.0    // (c)  Default bed temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.

-// Servo deactivation
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
-//#define DEACTIVATE_SERVOS_AFTER_MOVE
-
 /**
 * Filament Width Sensor
 *
--- a/Marlin/src/config/examples/wt150/Configuration.h
+++ b/Marlin/src/config/examples/wt150/Configuration.h
@ -1690,6 +1690,11 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }

+// Servo deactivation
+//
+// With this option servos are powered only during movement, then turned off to prevent jitter.
+//#define DEACTIVATE_SERVOS_AFTER_MOVE
+
 /**
 * Default extrusion settings
 *
@ -1702,11 +1707,6 @@
 #define DEFAULT_HOTEND_TEMP        205.0    // (c)  Default nozzle temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.
 #define DEFAULT_BED_TEMP            60.0    // (c)  Default bed temperature that will produce usable results by the printer.  Used by G26 Mesh Validation Pattern tool.

-// Servo deactivation
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
-//#define DEACTIVATE_SERVOS_AFTER_MOVE
-
 /**
 * Filament Width Sensor
 *