773fa5c40f
Fix define used when PID is off ( #13119 )
...
Replaced `PID_MAX` with `BANG_MAX` since it should be the correct define to be used when PID is not enabled.
6 years ago
f7efe6f6c5
[2.0.x] Fix TEMP_STAT_LED startup init ( #13120 )
6 years ago
2bd6ce4b62
Update German language ( #13125 )
6 years ago
27115ff7eb
Update Italian language ( #13123 )
...
Incomplete.
6 years ago
08a8bd10ca
Updated Slovak translation ( #13122 )
6 years ago
3e2a4c3b26
Show mixer and temperature menus while printing
6 years ago
8d271f20fe
C10mini E steps of 95
...
See https://www.patreon.com/posts/creality-cr10-24602624
6 years ago
9737608f0a
Enable gradient when alias is cleared
6 years ago
5cd0fa3ce1
Basic GPIO expander using the ESP32 I2S peripheral ( #12959 )
6 years ago
3983cacbcf
No extern needed for func decl
6 years ago
43b29c093b
Update pinsDebug_list.h with XY PWM pins
6 years ago
166e567ab8
Fix HAS_MOTOR_CURRENT_PWM
6 years ago
6de3d34378
M166 Gradients, LCD Menu for 2-channel Mixer (Geeetech A10M/A20M) ( #13022 )
6 years ago
7ee35c2611
PID_MENU option to save PROGMEM in LCD menus ( #13095 )
6 years ago
936f982392
Update German Language ( #13110 )
6 years ago
0e37fe8776
Apply minimum C in M303 ( #13113 )
...
Apply minimum `C` in `M303`. `PID_autotune()` needs to be called with a 'C'ycles-parameter >2 to give meaningful (different from 0) PID-factors. Therefore silently raise C to 3. Fixing one aspect of #13104
6 years ago
5a316664e5
Update chopper timing
6 years ago
fcb16ceb29
Update default config
6 years ago
9ae7cca5e9
Disable RGB_LED for 3DFabXYZ ( #13097 )
6 years ago
f3b6cb4d34
Clean up, update config comments
6 years ago
ae03753ef1
Fix PCA9533 with PRINTER_EVENT_LEDS
6 years ago
95d3f3953a
DEFAULT_WEBSITE_URL => BOARD_WEBSITE_URL
6 years ago
6ddd81c178
[2.0.x] Update German Language ( #13100 )
...
add MMU2
6 years ago
7c9ff322f3
Update Italian language ( #13099 )
6 years ago
ce8cb6a5d9
[2.0.x] Update German Language
...
add MMU2
6 years ago
f269766408
Put the MMU2 menu with the others
6 years ago
e1604198ff
G425 — Auto-calibrate Backlash and Nozzle Offsets ( #13050 )
6 years ago
113af46a1b
Add ExtUI methods to babystep probe/nozzle offsets ( #12590 )
6 years ago
413e303ad5
More Advanced Pause options ( #12984 )
6 years ago
19cf72e057
Support individual solenoid disable with M381 ( #13008 )
6 years ago
d81342254a
Support new TMC drivers ( #13026 )
6 years ago
e1587da228
Clean up HAL_spi_Due.cpp ( #13087 )
6 years ago
524c6c10bf
MAGNETIC_PARKING_EXTRUDER ( #12351 )
6 years ago
1bd9a63049
Add HAS_EXTRA_ENDSTOPS macro
6 years ago
3c49396370
Fix compile error with DUE + MAX6675 ( #13086 )
6 years ago
ab6908a513
Fix Probe Offset bug...
6 years ago
69aaf5d096
MMU2 fixes ( #13082 )
6 years ago
2f8e89adc3
Remove extraneous ui. prefixes
6 years ago
870757aa17
Tweaks to pins_GT2560_V3.h
6 years ago
b96cc30cd0
HAL spacing tweak
6 years ago
9e394139e5
Followup to 90911104
6 years ago
b35a7c2c87
Fixed closed-loop planner stall ( #13005 )
6 years ago
691e925adc
Update German language ( #13012 )
6 years ago
1497fb388a
M29 match logic was reversed ( #13013 )
...
* M29 logic was reversed
If in card-saving mode generate errors line errors for anything that's *NOT* "M29 ?"
* Update queue.cpp
* Update queue.cpp
6 years ago
b5fd2fb58b
Allow M29 to be processed late
6 years ago
c03bac9ad4
Update queue.cpp
6 years ago
a49f0205ea
Update queue.cpp
6 years ago
9091110460
LPC1768 - Don't change CS pin state ( #13015 )
6 years ago
10d855cb21
Sanity check USER_GCODE formatting
6 years ago
d97bb4c41c
Followup to e10943d0
6 years ago
2f176d6fb8
Flush RX buffer on G-code line errors to prevent hang ( #13018 )
6 years ago
ca73b2f465
Add static assert to catch errors in COPY(a,b)
6 years ago
df1043516e
Fix the delta homing issue ( #12974 )
6 years ago
4200bd2fc1
Report on M92 with no arguments ( #12833 )
6 years ago
e10943d0d8
Minor tweak to main menu
6 years ago
d4d1b28a06
Fix some include paths
6 years ago
0d720a6ff4
Tweak to emergency_parser.h
6 years ago
0a7ea7063f
Hide Resume Print when not relevant
6 years ago
afe79ba22b
Minor code cleanup
6 years ago
fdb97a3e9c
Add class and macro to save and auto-restore a variable
6 years ago
433518de74
Prevent M420 error from disconnecting OctoPrint
...
Just echo the error instead of labeling it `Error:`.
6 years ago
5cfc1cdacc
Support SWITCHING_NOZZLE with 2 servos ( #13054 )
6 years ago
3c88cac2e9
Velleman Vertex Delta pins ( #13072 )
6 years ago
6fb4001b58
Add option to disable fan speed slowing in M303 ( #13066 )
6 years ago
ca1be02bf0
Tweak some pins formatting
6 years ago
38c2ca9281
Clean up trailing whitespace
6 years ago
4d1093b386
Fix init of last_direction_bits ( #13067 )
6 years ago
4fa1c52688
Tweak serial output code
6 years ago
a5e3384691
Pre-apply cosmetic changes to mixing
6 years ago
0358ffcd4c
Drop E element from `homing_feedrate_mm_s`
6 years ago
95223cb28e
Remove dead code from stepper.h
...
These values are always supplied by `Conditionals_post.h`.
6 years ago
c3cb449990
TMC2130 dual-stepper Sensorless Homing ( #13061 )
6 years ago
f6edd2c472
Move stepper settings to "Advanced Settings" menu ( #13063 )
6 years ago
68bbac207e
Update pins_FORMBOT_TREX3.h ( #13058 )
6 years ago
6a57d0b381
Prusa MMU2 ( #12967 )
6 years ago
996f7d1642
Fix I2C_POSITION_ENCODERS commentary
6 years ago
988b5aa4e6
Update GT2560 V3 pins ( #13036 )
6 years ago
7d927b6691
Move Z Probe Z Offset from Advanced to basic Configuration ( #13056 )
6 years ago
31e213e427
Always show Tune sub-menu ( #13049 )
6 years ago
f0503372d9
Revert E_AXIS_N cast ( #13055 )
6 years ago
a1d03fe7ba
Fix single nozzle fan ( #13038 )
6 years ago
159d7eefda
New boards entry for the A20M
6 years ago
97da6c1da5
Use MIN/MAX for min/max
6 years ago
17a8c37148
Label menu edit items
6 years ago
ddeca7a358
Fix resume from power loss G-Code. ( #13035 )
6 years ago
02ab66fca3
Update Cohesion3D Pins Files ( #13027 )
6 years ago
a79d80c78e
Minor cleanup of pause code ( #13030 )
6 years ago
0da636e1a3
Set correct stepper direction on reset ( #13032 )
...
On a reset steppers were being initialized to incorrect direction. Original code wasn't respecting `INVERT_Z_DIR` define.
6 years ago
3845baf398
Followup to #12982
6 years ago
48a3502656
Remote streamer improvements ( #12982 )
6 years ago
621fbe99de
Followup to #12817
6 years ago
f214118e45
Action to notify host of filament runout. ( #12817 )
6 years ago
aad770bce8
Bring default configs in sync
6 years ago
3f91233f6d
M29 logic was reversed
...
If in card-saving mode generate errors line errors for anything that's *NOT* "M29 ?"
6 years ago
0e0cc13650
Fix M29 for Pronterface SD card upload ( #13010 )
6 years ago
24fffb8d93
Fix undefined lcd_tmpfan_speed on NO_LCD_MENUS ( #13006 )
6 years ago
8f9b246d0e
Tweak some formatting, replace tabs
6 years ago
808df82b36
Support for Anycubic I3 ( #12972 )
6 years ago
ae91914260
Prevent name conflicts with mixed stepper drivers
6 years ago
0eca236dcd
Fix L6470 config comments
6 years ago
f4d1f13358
Warn on cold extrusion, dont error
6 years ago
aa74a900f5
Bring Rostock 301 and ArmEd configs up to date
6 years ago
0f07ba4f09
Tweak some comments
6 years ago
00cdd41b5f
Clean up for recent changes
6 years ago
7d53b79596
Update Slovak translation ( #12991 )
6 years ago
18c32996c1
[2.0.x] Updated Italian language ( #12997 )
6 years ago
7c1a5e3c47
Fix TEMP_TIMER in pins_STEVAL.h ( #12994 )
6 years ago
b4994ad12e
Update language_it.h
6 years ago
2f35747f29
L6470 SPI daisy chain support ( #12895 )
6 years ago
6453b82a5e
Clean up trailing whitespace
6 years ago
48a581ba2e
Tweak some HAL Due code
6 years ago
54fdf57b8c
ExtUI: Fix fan wrapping around from 0 to 100 ( #12987 )
6 years ago
dbe4126e07
Update language_en.h ( #12988 )
6 years ago
e5801b75f8
Fix TMC-related compile issues. ( #12971 )
...
- `STEALTHOP_[XYZE]` configuration options now set the default state.
6 years ago
bb30927549
Fix pins for ZONESTAR_LCD with Zonestar ZRIB ( #12956 )
6 years ago
dc65d96aca
Fix TMC compile error ( #12965 )
6 years ago
a1cf49935d
Add laser control menu ( #12883 )
6 years ago
75f2665f2e
LCD SD Card items near top when not using wheel ( #12926 )
6 years ago
e1f951813a
Remove old block end comment
6 years ago
52108192d1
Prevent L6470 class name conflict with drivers.h define
...
Fix #12824
6 years ago
0495fcd475
Minor spacing fix
6 years ago
c2cf8ffa82
Add support for Arduino DUE Shield Kit ( #12950 )
6 years ago
4e5a915ef8
Fix some Makefile comments
6 years ago
a5911765c3
Tweak some spacing
6 years ago
99e5e8362f
Rapide Lite 200 config, pins_RL200 RUMBA clone ( #12848 )
6 years ago
6411680364
Update some pins spacing
6 years ago
8a3f1d6932
Fix chopper timing struct and initialization ( #12943 )
6 years ago
c6991109b7
Update German language ( #12953 )
6 years ago
ca9eb14f6a
Update Italian language ( #12951 )
6 years ago
acf266fe78
Fix a compile warning, etc. ( #12955 )
6 years ago
424aa05cc2
Fix some file endings
6 years ago
ce563d7c2e
Various general cleanups
...
Mostly from the L6470-oriented PR
6 years ago
02cc63d6d4
Update CreatorPro Configuration_adv.h
6 years ago
f4c16e683b
Follow up fixes to #12884 ( #12940 )
6 years ago
712e23c383
Fix up some whitespace
6 years ago
20c20dacb7
MKS SBASE needs DRV8825 ( #12911 )
6 years ago
7bb5d4bfe8
Small LED code reorganization ( #12929 )
6 years ago
e6805582a6
M569 to change stepping mode. Add new TMC section to LCD. ( #12884 )
6 years ago
d08f27e27b
Add support for STEVAL 3DP001V1 ( #12894 )
6 years ago
cdb562d558
Bring Migbot config up to date ( #12916 )
6 years ago
8f4c6e6d1a
Fix case light on boot ( #12919 )
6 years ago
f11c6d5d02
Fix M107 when dual-nozzles share fan ( #12819 ) ( #12909 )
6 years ago
64a4649290
STM32 - Fix SD write ( #12897 )
6 years ago
294521439e
Clean up Configuration_adv.h ( #12900 )
6 years ago
59b18aaeef
Allow resume from pause with parking enabled ( #12893 )
...
Currently, Pause of an SD-Memory card print does not work. This has been verified to resolve the issue by multiple people.
I understand more work needs to be done to resolve some of the concerns...
6 years ago
85f149befe
Save some progmem ( #12913 )
6 years ago
7fde8d9d1e
Add CreatorPro / Makerbot / QIDI / etc and Mightboard RevE support ( #12855 )
...
- Fix a bug in MAXxxxx thermocouple temp reporting.
- Add support for 3-wire HD44780.
- Add support for PCA9533 RGB driver.
- Add configuration examples for FlashForge CreatorPro.
6 years ago
3644c940bf
Tweak SD section of Main Menu
6 years ago
1a79878dff
Remove TMC_Z_CALIBRATION in favor of Z_STEPPER_AUTO_ALIGN
6 years ago
7cfce20cd3
Update comments on M125
6 years ago
dc4786a504
Config files for PowerWASP Printer ( #12889 )
6 years ago
3e867008f0
Fix some HAL_STM32F1 type declarations
6 years ago
eb78aed863
Rename LCD menus according to variable types ( #12892 )
6 years ago
ed3ab5e212
Fix M24 not starting new job ( #12887 )
6 years ago
f9299c4461
Make timer definition in pin files for STM32 possible ( #12874 )
...
RemRam needs to redefine a particular timer to work correctly. The HAL did foresee this possibility and checks if the timer was already defined for either the stepper or temperature timer.
Prior to this commit the header file for the timers couldn't see those definitions in the pin file, but this commit will fix this.
Tested on an actual hardware to verify. (It wouldn't boot without it.)
6 years ago
082f6a27de
ADAPTIVE_FAN_SLOWING extension to hotend thermal protection ( #12853 )
6 years ago
459f4fef60
Fix Temperature::init bug with HEATER_4_PIN
6 years ago
a403d9a50c
Improve menu pause / resume ( #12876 )
6 years ago
432c21456f
Add 3DFabXYZ Migbot example config ( #12775 )
...
Co-Authored-By: Alain Martel <alain74martel@gmail.com>
6 years ago
fb8111553e
getStatus => report_status
6 years ago
2919f3045d
[LPC176x] Update PIO extrascript ( #12878 )
6 years ago
19fea772e5
Use E_AXIS_N where it makes sense
6 years ago
0d30ccf767
Tweaks to TMC26XStepper
6 years ago
1fd8e2c649
Fix: Junction Deviation calculates wrong cos(theta) on CoreXY ( #12879 )
6 years ago
b402040059
Split bed size sanity check into two
6 years ago
1d33784bf9
Add RUMBA32 Board ( #12856 )
6 years ago
a0ef6198ff
Level bed corners Z-hop height option ( #12858 )
6 years ago
8ae6f1e556
Fix errors and some compiler warnings with HAL_STM32 PlatformIO build ( #12869 )
6 years ago
e6484d9dab
Return to status when SD card is removed
6 years ago
5f2d75f45b
Move PINS_DEBUGGING to @section develop
6 years ago
da42f27c9e
Use maths macros for ceil/floor
6 years ago
de4561c980
VORON Add LCD option BEEP_ON_FEEDRATE_CHANGE ( #12822 )
6 years ago
709a6356f7
Remove obsolete test conditions ( #12829 )
6 years ago
bcf347403b
Fix M106 extruder & fan count ( #12820 )
6 years ago
ba7e35cbab
Add LCD option BEEP_ON_FEEDRATE_CHANGE ( #12774 )
6 years ago
d372e7e477
SDIO support for STM32F1 ( #12782 )
6 years ago
6a8fb0f25f
Simplify backlash compensation code. ( #12813 )
...
- Use `TEST(dm,axis)` to determine directions instead of doing comparisons.
- Remove recomputation of `millimeters` and `delta_mm` since backlash compensation should not affect the distance over which material is extruded.
6 years ago
7f244f9b9c
Update LPC SD pins for BIQU SKR ( #12767 )
...
(Exactly matching the Azteeg X5 MINI Wifi)
6 years ago
813a4ea107
Add support for Mks Robin TFT display ( #12706 )
...
* Add support for MKS Robin TFT display
- Add support for MKS Robin TFT display and encoder for MKS Robin board.
- Generic 128x64 UI with x2 upscale is used (for now).
- Tested on MKS Robin TFT V2.0 with ST7789V controller.
6 years ago
c4237b529f
Fix MKS Mini and SD card conflct over SPI mode ( #12783 )
6 years ago
01f75591c6
Fix GTM32_PRO_VB Serial and HAL via watchdog ( #12753 )
...
Move `watchdog_reset` from `.h` to `.cpp` to eliminate the need to include `MarlinConfig.h` in a HAL-related file.
6 years ago
288340cb6c
Followup to VORON
6 years ago
2aaa681dea
Remove unused Cheaptronic pins
6 years ago
81e753064a
Fix ExtUI compile warnings and error ( #12799 )
6 years ago
74c47803f7
Add VORON printer ( #12705 )
6 years ago
637fb20c75
Allow 4 fan animation frames ( #12772 )
6 years ago
d9cf5e4883
Update pins_BIQU_SKR_V1.1.h ( #12758 )
6 years ago
cb643d87df
Adding missing code for triple Z-stepper auto-align ( #12786 )
6 years ago
14a7faf087
Fix compile warning comparison uint and int ( #12788 )
6 years ago
60cb36bef3
Misc. improvements ( #12747 )
...
* Make ExtUI respect MAXTEMP limits
- Temperatures are now clamped by MAXTEMP limits rather than arbitrary values.
* Speed up USB init, add status
- Speed up USB initialization
- Show status message if init failed
* Enable status messages for EXTENSIBLE_UI
* Adjust max limit to MAX_TEMP - 15
* Misc. tweaks to formatting, const, etc.
6 years ago
4f2473053c
Fix M106 with SINGLENOZZLE
6 years ago
7557f8d68c
Rename all Stm32f1 to STM32F1 ( #12639 )
6 years ago
371d9a1acf
Fix line-endings, formatting, whitespace
...
Followup to #12770
6 years ago
135c74017c
Fix compile DEBUG_EEPROM_READWRITE error ( #12746 )
6 years ago
54ba44ee37
Fix bad sanitycheck ( #12748 )
6 years ago
b01a630bd0
[2.0.x] Correct Ender 3 bed size ( #12769 )
6 years ago
44ed34475b
Add MKS BASE 1.4 pins ( #12770 )
6 years ago
3a16cb6d7f
Slightly Slower Max X Axis speed
...
On some T-Rex 2+ machines the previous max step rate could lose steps....
6 years ago
814d93c7cf
Fix G33 sprintf output warning ( #12738 )
6 years ago
3877bf9704
Fix compile error with delta and sensorless homing ( #12740 )
6 years ago
cfc5e96b4b
Move JD to Config.h (and fix jerk->eeprom bug) ( #12720 )
6 years ago
594898aea7
Limit hotend / bed temperature to maxtemp-15 ( #12713 )
6 years ago
530ef5846f
Make nomove=false for toolchange on filament swap ( #12739 )
6 years ago
14ddda285c
Confirmation on Abort SD print ( #12717 )
6 years ago
f8c5d31864
Bugfix 2.0.x add motherboard pins define ( #12689 )
...
- `pins_BIQU_B300_V1.0.h` defines pins for B300, as found in the BIQU Thunder 3D printer.
- `pins_BIQU_SKR_V1.1.h` defines pins for bigtree/BIQU SKR V1.1 motherboard.
6 years ago
b7a8dcc35d
Update Formbot T-Rex 3 pins ( #12662 )
6 years ago
f7127c44f8
Wanhao Duplicator i3 Plus pins create ( #12701 )
6 years ago
33abb86b7e
Add support for MKS Robin board ( #12650 )
...
Implement initial support for MKS Robin (STM32F103ZET6) board.
Custom build script is used to generate encrypted firmware compatible with original MSK Robin bootloader (i.e. safe firmware update from SD card and possibility to go back to original close-source firmware).
6 years ago
367a9f65aa
Add Formbot 350c Thermistor ( #12661 )
6 years ago
33f3c75213
GTM32 Pro VB FAN-PIN correction ( #12666 )
6 years ago
9d59a9c840
Followup to #12691 (typo)
6 years ago
3829d6ccf8
FYSETC F6 13 - E2_SERIAL_TX_PIN correction ( #12667 )
6 years ago
d35dcafa3d
Added MKS MINI 12864 support to FYSETC F6 V1.3 ( #12656 )
6 years ago
98cf546771
Limit set hotend temperature to maxtemp. ( #12690 )
6 years ago
4dad489a50
[2.0.x] Limit PID autotune target to maxtemp-15 ( #12691 )
6 years ago
8dcc28c9ae
Squelch warning mentioned in #11061 ( #12676 )
6 years ago
4c8a6eee7b
[2.0.x] Update Czech translation ( #12683 )
6 years ago
fcaed685b2
[2.0.x] Set DEFAULT_NOMINAL_FILAMENT_DIA to 1.75 in Anet A6 config ( #12664 )
6 years ago
0572be9439
[2.0.x] Enable PIDTEMPBED in Anet A8 example config ( #12655 )
6 years ago
c6e09c2689
[2.0.x] G33 clean up ( #12648 )
...
Remove obsolete workarounds in G33 for the now fixed zprobe_zoffset bug
6 years ago
7a5e637a37
Add spreadCycle parameter sets ( #12645 )
6 years ago
902d5b0f8b
Allow ExtUI to use LCD_SET_PROGRESS_MANUALLY ( #12628 )
6 years ago
9a4a463ec4
Sanity-check LIGHTWEIGHT_UI, move comment up ( #12630 )
6 years ago
55144284c2
TMC connection test, spreadCycle parameters, improved debugging ( #12616 )
6 years ago
97de9d54a5
Fix broken pins file include ( #12617 )
6 years ago
a7b3a61424
Improve some config comments readability ( #12615 )
6 years ago
daf07e4200
Align classic bed icon consistently
6 years ago
3bb8b3529a
Center ABL grid on bed with H parameter. ( #12610 )
6 years ago
6cf8d40f41
Fix some serial echos of pin states
6 years ago
f6321f878a
Simpler AVR + Trinamic + Soft Serial sanity-check ( #12606 )
6 years ago
7d15854514
Add Z_MIN_PROBE_PIN to MKS SBASE pins
6 years ago
e8bda62d2a
Followup to servo angles patch
...
Fix #12594
6 years ago
18fedafbc5
Refresh screen on SD Init
6 years ago
b22716e938
M425 Backlash Correction ( #11061 )
6 years ago
fa47ce369a
Sanity-check for negative steps, feedrate, accel
6 years ago
ef81b5f03e
Link to font docs in ultralcd_DOGM.cpp
6 years ago
4388015f1a
Tweak config formatting
6 years ago
b7e38ea249
Signal an invalid mesh for M420 enable / load
6 years ago
50b2fbd031
Trinamic: Split stealthChop, improve driver monitoring, etc. ( #12582 )
6 years ago
9fbd73d931
Fix up some delta settings
6 years ago
0947b92734
Build and CI fixes and optimizations ( #12584 )
...
-Disable LDF "deep+" mode on AT90USB platforms. Appears not needed any longer (likely due to fix 7322df26ad
6 years ago
11c7945365
Don't include STM32 Core code when compiling STM32 Generic ( #12575 )
6 years ago
64389acdf1
Print a space after scrolling status
6 years ago
7a361ad36a
Alternative fan image option ( #12579 )
...
* Alternative fan bitmap
* Move bed over by 3px
6 years ago
261c6f4b96
Fix pause/resume SD print
...
Followup to #12551 , addressing #12566
6 years ago
2224a4d61a
Remove AVR-only MARLIN_DEV_MODE code
6 years ago
e874f9664c
Tweaks to endstops code
6 years ago
3c58b16c9f
Move stepper enable/disable to stepper_indirection.h ( #12562 )
6 years ago
aaf862aef2
Fix angles for disabled EDITABLE_SERVO_ANGLES ( #12559 )
6 years ago
c986239837
A single SERIAL_ECHO macro type ( #12557 )
6 years ago
69d869c3d9
Tweak FR icon. Update font data.
6 years ago
0c1cd9f590
Fix "No SD Card" indicator
6 years ago
8be91677df
Fix Skew factors ( #12555 )
...
- Ensure Skew factors are calculated from test square measurements
6 years ago
03ef2d6c82
Fix "paused" message and M125 called by M25 ( #12551 )
6 years ago
95d154a91f
Fans loop macro
6 years ago
61db0b65b6
Followup to heating progress
6 years ago
4f9ec9ab45
Add heating progress bars ( #12543 )
6 years ago
929a513a6b
Add poll_runout_states, which returns 1 for runouts ( #12547 )
6 years ago
01b5c810d5
Space out multiple edit lines a bit
6 years ago
cd88ea2106
Fix runout debug output
...
Followup to #12544
6 years ago
cecc238f68
Save recovery info on SD pause
6 years ago
439a3e8463
Improve runout sensor, fix LIGHTWEIGHT_UI screen size ( #12544 )
6 years ago
5b24ce9024
Hide M217 compile warning
6 years ago
d94b50a3d8
Add sample config for Delta with MKS SBASE ( #10819 )
6 years ago
dec721c52b
Add Formbot Raptor2 and Raise3D pins ( #12532 )
...
* Add Formbot Raptor2 board
* Add Raise3D Rumba board
6 years ago
6aae199572
Add missing boards to Makefile
6 years ago
0a638cc022
Adjust Formbot Raptor pins
6 years ago
e5019a0481
Fix English special symbols ( #12529 )
6 years ago
09d6db491a
Fix wait_for_bed compile error
6 years ago
d545f984b0
Update Slovak translation ( #12523 )
6 years ago
730f223100
Correct FANMUX2_PIN ( #12538 )
6 years ago
d857cdfb27
Update Turkish language ( #12524 )
6 years ago
4a7c6f7241
NUM_ARRAY => COUNT
6 years ago
31113c5adf
Update Italian language ( #12512 )
6 years ago
b57343c255
Put status screen options in Configuration_adv.h
6 years ago
1fcc13b011
Allow Serial Overrun Protection to be disabled
6 years ago
29c53f2402
Hide some compile warnings
6 years ago
caca3c8503
Use wait_for_bed with WAIT_FOR_BED_HEATER
...
Addressing #12517
6 years ago
f1efcfed14
Fix backslash in language_test.h
6 years ago
3b186a55ac
Don't show superscript ³ with NOT_EXTENDED_ISO10646_1_5X7 ( #12513 )
6 years ago
82c96c971e
Bring superscripts slightly lower in BDF fonts
6 years ago
8a0992d921
Fast PWM for controller fan ( #12485 )
6 years ago
e98d195901
Remove extra declarations in cardreader.cpp ( #12520 )
6 years ago
fd2998efd5
Revert ADC_KEYPAD direction behavior ( #12508 )
6 years ago
d29cb09b3e
Fix a minor compile warning
6 years ago
5b1d52671c
Use superscript 3 in language_en.h ( #12504 )
6 years ago
7109dadd21
Additional pin definitions for Archim 2 ( #12500 )
...
- Added GPIO pins to Archim 2
- Added new 108 pin to `fastio_Due.h`
6 years ago
4975b13b74
Fix problems with LPC1768 EEPROM flash emulation ( #12503 )
...
* Remove duplicate calls to PrepareSector
Some flash memory API calls require that a call to `PrepareSector` is done before use. However this call is already made by the LPC1768 framework so the calls in this code are not required.
* Ensure correct alignment of RAM buffer
The LPC176X flash API requires that the RAM buffer used for write operations must be word-aligned. This change ensures that this is the case.
6 years ago
b738972e69
General cleanup of Re-ARM pins
6 years ago
ee423dcdd0
Invert hotend bitmaps, by default
6 years ago
c5642a894f
Fix ADC_KEYPAD middle button ( #12493 )
6 years ago
0946cbcdca
Revert some const changes (for now)
6 years ago
4def8b3b5e
Expanded options for _Statusscreen.h ( #12455 )
...
See the PR for full details. The updated system will be documented on the website in the near future.
6 years ago
d51e5690f4
Don't show updir with no card present
6 years ago
ec9d21a234
Shift YZ on graphical display to fit Z+123.45
6 years ago
817a37169a
Apply/unapply const here and there
6 years ago
643e0066a0
Followup to #12451
6 years ago
4bcb63b705
Fix for #12482 ( #12483 )
...
Fix Z-move to uninitialized position in SWITCHING_EXTRUDERS tool_change (no_move=true)
6 years ago
50ee747787
Fix compilation errors. Followup to #12439 ( #12481 )
6 years ago
90a58488b5
Corrected unused var, default switch, Travis tests ( #12477 )
6 years ago
a4c15dc54f
Modify MBL to use IJ instead of XY ( #12478 )
6 years ago
fc3f1c4572
Get u8g reference for lcdprint
6 years ago
88c57eaf55
Clean up some u8g code ( #12476 )
6 years ago
1f93d2bcf7
Fix LCD compile error, etc. ( #12472 )
6 years ago
826d570162
Combine Travis CI option-setting commands ( #12474 )
6 years ago
9d13f07d09
GTM32 Pro VB changes from Markku Sinisalo
6 years ago
5fbe5cabc8
Fixed displaying of kill MSG_OUTAGE_RECOVERY string. ( #12470 )
6 years ago
4ae9a06c60
Update M303.cpp ( #12471 )
6 years ago
c0b75f49b6
Fix "no effect" and "unused variable" compile warnings ( #12473 )
6 years ago
5a4fd8e0a6
Fix access to the DWT peripheral for STM32 HAL ( #12434 )
...
Access to the DWT peripheral for the `CYCCNT` register needs to happen before `main()`. The code needs to be called after the setup of the system clocks, so the right place is between the `premain()` and `main()` function of the STM32 Arduino core.
This patch moves the DWT access code to a new function, which is then placed between `premain()` and `main()`.
6 years ago
7f225b9421
Fix MAX_MESSAGE_LENGTH
6 years ago
06674a321a
Remove extra include
6 years ago
c1e17037e5
Various fixes for MarlinUI and ExtUI ( #12439 )
6 years ago
d3605cfc26
Don't start watching heaters when target is 0 ( #12453 )
6 years ago
93e958f695
Fix compile error with ZONESTAR_LCD+NO_LCD_MENUS ( #12466 )
6 years ago
22d7fed60a
Fix compile error with SD_FIRMWARE_UPDATE ( #12462 )
6 years ago
779b2709ec
Change temperature pin order for RemRam V1 ( #12458 )
...
Beta testers suggested to adopt the RAMPS order of temperature probe connectors. This commit fixes the order to the RAMPS order.
6 years ago
8ebb4dc294
Followup to static CardReader
6 years ago
7ee5894360
Allow float XY probe offsets
...
Responding to #12383
XY probe offsets should be integers because adding decimal points makes the code larger. But if decimals are very much wanted, this commit removes the old restriction.
6 years ago
43ecdb606f
Fix a compile warning ( #12452 )
6 years ago
984c4ba8c7
Enable SD Card on RepRap Display and RADDS ( #12446 )
...
* Enable SD Card on RepRap Display and RADDS
Define the necessary pins in `pins_RADDS.h` (copied from the `RADDS_DISPLAY` section) for the use of the SD card slot on RRD.
6 years ago
56a94c2a26
Use 'target_extruder' in M104 as with M109 ( #12448 )
6 years ago
66580f32c2
Make CardReader class static ( #12451 )
...
* Make CardReader a static class
* Make CardReader flags into bitfields
6 years ago
3e9ffaddb6
Consolidate, optimize some LCD menu code ( #12450 )
6 years ago
d97e31db4c
Optimize Power-Loss Recovery ( #12440 )
6 years ago
ca21ac6b9b
Support two MAX6675 thermocouples ( #8686 )
6 years ago
0e610815e4
No need for Cap:PAREN_COMMENTS
6 years ago
7a075a5dc9
Tweak extruder errors
6 years ago
2d92f333f5
Fix GcodeSuite::T active_extruder reference
6 years ago
d2bb53702a
Optimize target_extruder, ignore T with mixing ( #12432 )
...
* Optimize target_extruder, ignore T with mixing
* Give G-code Tn parity with tool_change
6 years ago
5e586a6b39
Fix to runout sensor code. ( #12431 )
...
- "old_state" is no longer a class static variable.
6 years ago
d82c350de7
Miscellaneous LCD code renaming, reordering ( #12430 )
...
* Move special characters to language.h
* Apply some naming standards
* Clean up menu item draw functions
* Rename some Temperature methods
* UI => ExtUI
6 years ago
edfd106bc5
Rejigger Filament Runout class ( #12428 )
6 years ago
f4c128ecaa
Move RRW keypad code to a common method ( #12429 )
6 years ago
54ec5528a0
hasstatus => has_status
6 years ago
ebf585b673
Fix an old sanity check
6 years ago
052d102ded
UltiMachine Archim 1 support ( #12404 )
6 years ago
664e20754d
Clean up pins files
6 years ago
1eb5249598
Fix Formbot Trex-2+ configs
...
Followup to #12422
6 years ago
075a22ed65
Update Portuguese-Brazilian translation ( #12402 )
6 years ago
3ceab8474c
Add required "cardreader.h" include ( #12419 )
6 years ago
98c2fc4e42
Endstops fix followup ( #12423 )
...
Followup to #12413
6 years ago
f19fd642ce
Updates to Formbot T-Rex 2+ configuration files ( #12422 )
...
Updates to Formbot T-Rex 2+ configuration files
6 years ago
cda5ef08fa
Debug of G2-G3 for UBL ( #12386 )
...
Changes only affect UBL. Everything else is left alone.
6 years ago
9ad3aed0ef
Fix tool-change for MIXING_EXTRUDER with < 2 virtual tools ( #12417 )
...
Fix #12416
Better handling of `ENABLED(MIXING_EXTRUDER) && !MIXING_VIRTUAL_TOOLS > 1` - to not fall through to the general case. Fix compiler warnings for `#elif EXTRUDERS < 2`.
6 years ago
d631267548
Refine endstops fixes ( #12413 )
...
When endstops/probe are enabled `ENDSTOP_NOISE_THRESHOLD` calls to `update` are required to properly re-sync endstops/probe status.
6 years ago
0ee1a92971
Group status methods, share reset_status with Extensible UI ( #12414 )
...
* Group status methods, share reset_status with Extensible UI
* Move common DOGM code to headers
6 years ago
690c4e8457
Clean TLM trailing whitespace
6 years ago
143b2896e0
Add M412 to enable/disable filament runout detection ( #12406 )
6 years ago
a163c89c6a
Followup to 50af1d1
6 years ago
Giuliano Zaro