|
|
|
|
@ -77,6 +77,8 @@
|
|
|
|
|
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
|
|
|
|
|
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
|
|
|
|
|
|
|
|
|
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* Whenever an M104, M109, or M303 increases the target temperature, the
|
|
|
|
|
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
|
|
|
|
|
@ -499,6 +501,7 @@
|
|
|
|
|
|
|
|
|
|
// Add runtime configuration and tuning of backlash values (M425)
|
|
|
|
|
//#define BACKLASH_GCODE
|
|
|
|
|
|
|
|
|
|
#if ENABLED(BACKLASH_GCODE)
|
|
|
|
|
// Measure the Z backlash when probing (G29) and set with "M425 Z"
|
|
|
|
|
#define MEASURE_BACKLASH_WHEN_PROBING
|
|
|
|
|
@ -1477,22 +1480,6 @@
|
|
|
|
|
*/
|
|
|
|
|
//#define TMC_DEBUG
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* M915 Z Axis Calibration
|
|
|
|
|
*
|
|
|
|
|
* - Adjust Z stepper current,
|
|
|
|
|
* - Drive the Z axis to its physical maximum, and
|
|
|
|
|
* - Home Z to account for the lost steps.
|
|
|
|
|
*
|
|
|
|
|
* Use M915 Snn to specify the current.
|
|
|
|
|
* Use M925 Znn to add extra Z height to Z_MAX_POS.
|
|
|
|
|
*/
|
|
|
|
|
//#define TMC_Z_CALIBRATION
|
|
|
|
|
#if ENABLED(TMC_Z_CALIBRATION)
|
|
|
|
|
#define CALIBRATION_CURRENT 250
|
|
|
|
|
#define CALIBRATION_EXTRA_HEIGHT 10
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* You can set your own advanced settings by filling in predefined functions.
|
|
|
|
|
* A list of available functions can be found on the library github page
|
|
|
|
|
|
Ludy
6 years ago
committed by