8923 Commits (665ac1e4d0d5d7ec5b194375d1ae3bcaf0268f46)

Author SHA1 Message Date
Bob-the-Kuhn f973ff49ae [2.0.x] MKS SBASE - Separate SD_DETECT for LCD and on-board SD cards (#10557) 7 years ago
Scott Lahteine 5ac226aa93 Further cleanup of inline delays 7 years ago
Marcio Teixeira 724e9f56c8 Removed "const" to match parser. (#10548) 7 years ago
Giuliano 2e1939e85c [2.0.x] report error on unsupported commands (#10553)
Raise an error when an unknown/unsupported G/M command is requires.

This will address #10546
7 years ago
Scott Lahteine a474a7e675 Correct AVR_ATmega328_FAMILY macro
…as with #10540

Co-Authored-By: per1234 <per1234@users.noreply.github.com>
7 years ago
Scott Lahteine f790b4bc0a Reorganize some conditionals 7 years ago
Scott Lahteine a51ba6e3f6 Fix ABL grid bounds test for Delta/SCARA
Addressing #10538
7 years ago
Scott Lahteine df6bc812b5 Fix disable of Z_HOMING_SENSITIVITY for HOMING_Z_WITH_PROBE
As pointed out in #10532
7 years ago
Scott Lahteine 63e0b36f8b Fix G29_RECOVER_COMMANDS typo 7 years ago
Scott Lahteine f83361a814 Apply const to tmc_sensorless_homing 7 years ago
Scott Lahteine 212e52e485 Basic delay for Max7219 on ARM 7 years ago
Scott Lahteine 7b6e742436 Wrap delay macros in do{}while(0) 7 years ago
Karl Andersson 58ca3be1ec delayMicroseconds() cannot be called in critical section (#10535)
on the STM32 platform
7 years ago
Bob-the-Kuhn 00dfaae8df [2.0.x] Platformio - automate build & environment selection (#10503) 7 years ago
Scott Lahteine 299c4fed42 Undefine PIDTEMPBED without a bed heater 7 years ago
Scott Lahteine 456cf971af HAL FastIO cleanup and fixes 7 years ago
J.C. Nelson 5b5e322356 Set Interrupt Priorities and Grouping for STM32F103. (#10517) 7 years ago
Scott Lahteine 0e450df6a2 MKS OLED support for RUMBA
Based on #10519

Co-Authored-By: Alex <alex18881@users.noreply.github.com>
7 years ago
Scott Lahteine 2578996631
[2.0.x] Emergency parser for multiple serial ports (#10524) 7 years ago
Scott Lahteine 8cc31d1b2e Cleanup to emergency parser
Followup to #10516
7 years ago
Chris Pepper 2242b98248 [LPC176x] Emergency Parser Feature (#10516) 7 years ago
Scott Lahteine eef0248a1c
Add M420 C to adjust the whole mesh (#10522) 7 years ago
Eduardo José Tagle c1e5ebbc1e [2.0.x] AVR: Atomic bit set and clear of upper pin ports without critical section (#10502)
* AVR: Atomic bit set and clear

The critical section can be dropped, saving 3 cycles per access. Also simplified pin toggling for all ports.
7 years ago
Marcio Teixeira 02a711c4d6 [2.0.x] Fix crash upon repeated calls to process_subcommands_now_P (#10509) 7 years ago
Scott Lahteine a3ce8a3fcd Add sanity checks for EMERGENCY_PARSER 7 years ago
Scott Lahteine f06c3c38b9 Fix M0_M1 with no LCD 7 years ago
Scott Lahteine c82dd5129f Revert potentially-not-redundant UBL test
Response to #10435
7 years ago
Scott Lahteine 9789c1c719 Fix current_temperature_chamber compile error
Fix #10505
7 years ago
Eduardo José Tagle 0c428a66d9 Proper AVR preemptive interrupt handling (#10496)
Also simplify logic on all ARM-based interrupts. Now, it is REQUIRED to properly configure interrupt priority. USART should have highest priority, followed by Stepper, and then all others.
7 years ago
Scott Lahteine f423e54f77 Strip trailing spaces 7 years ago
Scott Lahteine 8177c4334e
Merge pull request #10498 from xC0000005/MalyanLCDFix
Fix overridden Malyan LCD functions
7 years ago
Scott Lahteine cb46cb8480
Add HAS_HEATED_BED conditional (#10495) 7 years ago
Marcio Teixeira 10a25f733e Add SENSORLESS_HOMING to Archim 2.0 (#10500) 7 years ago
xC0000005 24d23ce49b Fix function definitions for Malyan LCD 7 years ago
Alexey Shvetsov ad58b626a3 Fix pin mappings for Viki2 on Azteeg X5 GT (#10487) 7 years ago
Scott Lahteine 9e07df5c1b
Extra options for LEVEL_BED_CORNERS (#10483) 7 years ago
Scott Lahteine 1c3d49afe0 Fix G28 with Z_AFTER_PROBING
Fix #10476
7 years ago
Scott Lahteine b6747c742a Cleanup AZTEEG_X5_GT pins for VIKI
What should the SD detect and SDSS pins be? Followup soon on #8138
7 years ago
Scott Lahteine 023385ca59
Merge pull request #10479 from thinkyhead/bf2_creality_power_loss_resume
[2.0.x] Creality3D Power-Loss Recovery
7 years ago
Scott Lahteine 3396671011
[2.0.x] Reset LCD status to fallbacks (#10470)
* Remove obsolete strings
* Tweak some static consts
* Reset LCD status to fallbacks
7 years ago
Scott Lahteine d58450c82a Russian language update
Co-Authored-By: anton-piliugin <34044202+anton-piliugin@users.noreply.github.com>
7 years ago
Scott Lahteine 11ab017dd0 Creality3D Power-Loss Recovery 7 years ago
Scott Lahteine 594d6f9efd Add POWER_LOSS_RECOVERY to example configs 7 years ago
Scott Lahteine 7dcd0a1cff Add R parameter to G28 to specify pre-raise 7 years ago
Scott Lahteine 2f4b4d6076 Add Stopwatch::resume method 7 years ago
Scott Lahteine a90cbc6339
[2.0.x] Wait for bed heaters between probing (#10472) 7 years ago
Scott Lahteine a0dac95d25
Merge pull request #10460 from thinkyhead/bf2_trigorilla_14
[2.0.x] Split TRIGORILLA into 1.3 and 1.4
7 years ago
Scott Lahteine f0cbf3d432 Correction to sanity check 7 years ago
Scott Lahteine d8a8eec6ea Add THERMAL_PROTECTION capability
Based on #10465

In response to `M115` the firmware reports if Thermal Protection is enabled (1) or not (0). This information can be used by software such as OctoPrint (more precisely the Printer Safety Check plugin) to warn users when Thermal Protection is not enabled in the firmware.

Co-Authored-By: andrivet <sebastien@advtools.com>
7 years ago
Scott Lahteine 186d71b361 Complete CREALITY_ENDER revert 7 years ago
Scott Lahteine 11ef432476 Match Makefile to boards.h 7 years ago
Scott Lahteine 2be5fe5ddf Split TRIGORILLA into 1.3 and 1.4 7 years ago
Scott Lahteine 80e29492c6 TRIGORILLA => TRIGORILLA_13 7 years ago
Scott Lahteine dea686cf55
Define short pin names in fastio for STM32 (#10461) 7 years ago
Scott Lahteine 65a6a86d19 Don't report point 0 in MBL G29 7 years ago
Scott Lahteine 6faa93d787 Add G29_RETRY_AND_RECOVER to example configs 7 years ago
Marcio Teixeira 5cc7916e69 Add G29_RETRY_AND_RECOVER feature
- Add an option to retry G29, optionally executing a G-code procedure after each failed probe.
7 years ago
Scott Lahteine 78ea4871f9 Fix up enqueue now functions
…and apply to MALYAN_LCD.
7 years ago
Roxy-3D 23635c2b64
Update ubl_motion.cpp
Restore necessary and needed loop termination logic.
7 years ago
Scott Lahteine 8ca3c43d73 Updated language_data spacing, headers 7 years ago
Scott Lahteine 184c077c58 Correct includes (u8g.h) and spelling 7 years ago
Yunhui Fu 627348b46c move the TALL_FONT_CORRECTION to language files 7 years ago
Yunhui Fu 77bc653524 Use X windows 6x12 bitmap font to support western languages. 7 years ago
Yunhui Fu d81649b365 Update language data for sk. 7 years ago
Yunhui Fu 41839746a2 Removed unused macros 7 years ago
Scott Lahteine 4f184ba5da
[2.0.x] Add BOARD_MKS_BASE_15 with digital micro-stepping (#10454)
* Add BOARD_MKS_BASE_15 with digital micro-stepping
* Rename MKS_13 to MKS_GEN_13
7 years ago
Scott Lahteine ad6baa5c9d Fix for UBL set_bed_leveling_enabled 7 years ago
Scott Lahteine df2f24617b Use 0 as the bed position (not Z_MIN_POS) 7 years ago
Karl Andersson 428c54f2ad [2.0.x] HAL for STM32F4 (#10434) 7 years ago
Chris Pepper 744bcaee61 [2.0.x] Fix problems compiling with Arduino IDE (#10441)
* Fix problems compiling u8glib utf8 support on Arduino
* Change header in auto-generated font data
* Change include in font gen scripts
7 years ago
GMagician 20772492aa Fix compile warnings in AVR fastio.h (#10440) 7 years ago
Scott Lahteine f57a008c58
Merge pull request #10443 from thinkyhead/bf2_fix_and_improve
[2.0.x] Improve UBL mesh report, M420 V T, M421 N, and…
7 years ago
Scott Lahteine 89b1580587 Fix compile error in tmc_status 7 years ago
Scott Lahteine 52c024e260 M221 with no parameters report flow 7 years ago
Scott Lahteine 01b01f6dfd Tweak fwretract.retract debug, comments 7 years ago
Scott Lahteine e4acd2c40e One fewer compare in _lcd_move_xyz 7 years ago
Scott Lahteine e05c825a05 Update position for UBL non-segmented activate/deactivate 7 years ago
Scott Lahteine d462be6de6 Try FIXFLOAT rounding based on sign 7 years ago
Scott Lahteine 39c6f65ce7 Ignore LCD_BED_LEVELING with UBL 7 years ago
Scott Lahteine 0746aff595 Improve UBL mesh report. Add M420 T, M421 N 7 years ago
Scott Lahteine 3c826e5d05 Prevent delay when power is already on
Fix #10410
7 years ago
Scott Lahteine 5a064d0e94 Fix bug in planner.set_position_mm 7 years ago
Scott Lahteine 0945674ba2
Use H0 by default with UBL_MESH_EDIT_MOVES_Z (#10428) 7 years ago
Scott Lahteine 6cb83758d7 Fix Brazilian Portuguese language duplicates 7 years ago
Scott Lahteine 8f57e098de Use end-of-line comments in planner.cpp 7 years ago
Scott Lahteine 6c7a17dba6
Abort SD printing more safely (#10407)
Allow the current command to complete when aborting an SD print, otherwise some commands (G28, G29, etc.) will cause trouble.
7 years ago
Chris Pepper c9aed73987 Fix missed includes from HAL macro patch (#10416) 7 years ago
Scott Lahteine 9f8a96fb8a
Brazilian Portuguese update (#10409) 7 years ago
Yunhui Fu 93273a4c9e Fix u8g.h search path error (#10419)
Support env MARLIN_LANGS for user select generated language, and update doc; update script to generate dogm_font_data_ISO10646_1.h automatically.
7 years ago
Scott Lahteine 584735c994 u8g.h => clib/u8g.h 7 years ago
Scott Lahteine 29dda871cb Patch "upload_disk" to make python happy 7 years ago
Scott Lahteine 36b97bde9f clear_block_buffer, kill_current_block in quick_stop 7 years ago
Scott Lahteine 99282a46e9 Make sure ABL (manual) starts close to the bed 7 years ago
Roxy-3D 21f13f9e57
Stow Probe at end of G29 J3 7 years ago
KangDroid 6c535081ec [2.0.x] Add optional menu item to toggle software endstops (#10389) 7 years ago
Scott Lahteine 3c5c6d478a Prettify process_parsed_command 7 years ago
Scott Lahteine 0535ebc4d2 MESH_BED_LEVELING before PROBE_MANUALLY 7 years ago
Scott Lahteine bb7064cc30 Tweak MBL move to bed code 7 years ago
Chris Pepper cc6d41e1d3 Use a macro for HAL header redirection (#10380) 7 years ago
Luc Van Daele 12785583d0 [2.0.x] G33 MIN_STEPS_PER_SEGMENT (#10386) 7 years ago
Yunhui Fu c96412a78f [2.0.x] UTF-8 language translation support (#10213) 7 years ago
Scott Lahteine daa712455b Make sure MBL starts close to the bed
Fix #10390
7 years ago
Scott Lahteine 4c8751727a Fix M118 parameter handling
Fix #10388
7 years ago
Scott Lahteine 3bc179a16f Compress/update comments ubl_motion
…to fit more code on the screen and correct outdated commentary contrasting ABL.
7 years ago
Luc Van Daele 646aa20b43 Overhaul of G33 Delta Calibration (#8822) 7 years ago
Luc Van Daele ac2e0afb62 Low Point for delta calibration (#10363) 7 years ago
Eduardo José Tagle 57a899a412 [2.0.x] 6th-order jerk-controlled motion planning in real-time for AVR (#10373) 7 years ago
Bob-the-Kuhn 85014cd132 [2.0.x] LPC1768 - automatic selection of upload disk (#10374) 7 years ago
Scott Lahteine 8669dba5e6
Merge pull request #10172 from noingwhat/2.0.x-Filament-Change-Acceleration
[2.0.x] Filament load/unload add acceleration for Bowden
7 years ago
Scott Lahteine 472ab0cc24 Tweak RAMPS SDSS pins 7 years ago
LichtiMC b94c8defee Provide additional information about SMART-RAMPS board (#10353) 7 years ago
Scott Lahteine 6f8e228880 Add RESET_PIN to pins_RAMPS_SMART.h 7 years ago
Sean 2d9b0a66fe Add Filament Change accelerations 7 years ago
Scott Lahteine 71d3523254 Add Filament Change accelerations to example configs 7 years ago
Scott Lahteine 8b8ad14178 Add Z_PROBE_LOW_POINT to prevent damage 7 years ago
Scott Lahteine 82dafbba33 Add Z_PROBE_LOW_POINT to example configs 7 years ago
Roxy-3D a731a723e8 Better i3-2020 Z_PROBE_OFFSET_FROM_EXTRUDER 7 years ago
Roxy-3D 26cc12eaa4 Resolve corruption of Max7219 Debug LED Matrix 7 years ago
Scott Lahteine dca69efc11 Update Bed PID comments 7 years ago
Scott Lahteine 56486c5c0e Apply const to manage_inactivity 7 years ago
Scott Lahteine a6485456df Fix LIGHTWEIGHT_UI with UBL
See https://github.com/MarlinFirmware/Marlin/issues/10317#issuecomment-379100702
7 years ago
Scott Lahteine e02fc4f1d6 Better RESTORE_LEVELING_AFTER_G28 sanity-check
As suggested by @GMagician
7 years ago
Scott Lahteine 44a697ab04 Set STM32F1 TEMP_TIMER_FREQUENCY to 1K
Responding to https://github.com/MarlinFirmware/Marlin/pull/8833#issuecomment-379426803
7 years ago
Scott Lahteine cec6e19099 Add RepRapPro Huxley configuration
Based on #10343 by @indazoo
7 years ago
Scott Lahteine 9ff4e9e1e6 Patch _IS_HW_SPI so defined() works 7 years ago
Scott Lahteine cea398849e Tweak to gcode_line_error/return 7 years ago
etagle a29adde5c0 Implement BEZIER_JERK_CONTROL
Enable 6th-order jerk-controlled motion planning in real-time.
Only for 32bit MCUs. (AVR simply does not have enough processing power for this!)
7 years ago
Scott Lahteine 5932df7ea1 Add BEZIER_JERK_CONTROL to example configs 7 years ago
Lenbok 0e8242180d Chamber temperature monitoring and auto fan control.
This is an initial cut for feedback, updated for 2.0.x.

Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?

Chamber temperatures are not reported on the LCD in any way.

When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.

As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
7 years ago
Scott Lahteine 5b3bda1c16 Add Chamber Temp options to example configs 7 years ago
Bob-the-Kuhn acda4ecb20 Fix DUE Trinamic SW/HW SPI sanity check (#10336) 7 years ago
Bob-the-Kuhn ab715c70d1 TMC SPI sanity-check and pins debugging (#10324) 7 years ago
Scott Lahteine 4dc7e64789 Update Slovak language
Based on #10313 by @rmoravcik
7 years ago
Scott Lahteine 0dccf9ea6a
Merge pull request #10318 from marcio-ao/pr-einsy-retro-tmc2130
[2.0.x] Fix TMC2130 DIAG1 active high, Einsy Retro
7 years ago
Marcio Teixeira 2efc072fdb Clear progress bar on completion (#10333)
Fix #10330
7 years ago
GMagician 6ce060cfe0 [2.0.x] Update language_it.h (#10322)
Updated to #10296
7 years ago
Marcio Teixeira 9356cf648f Added support for Einsy Retro
http://reprap.org/wiki/EinsyRetro
7 years ago
Marcio Teixeira 75037493fa Default active low for TMC2130 DIAG1 (#10294)
- Added sanity check to inform users to set the endstop to inverting
  when using SENSORLESS_HOMING
7 years ago
Scott Lahteine e8e60263c8 Scale feedrate (mm/s to deg/s) for SCARA 7 years ago
Scott Lahteine 051303ad42 Russian language updates
From #10311 by @anton-piliugin
7 years ago
Sean 2fa0a73c2c Implement filament change continuous purge 7 years ago
Scott Lahteine d133ad61f3 Add continuous purge to example configs 7 years ago
Scott Lahteine 4b25543633 Backtrace formatting cleanup 7 years ago
Bob-the-Kuhn 902c885782 Switch to TMC2130 compatible hardware SPI & misc (#10299) 7 years ago
Scott Lahteine 1c36606886 Fix MSG_HEATING_FAILED_LCD_BED macro evaluation 7 years ago
Scott Lahteine fe91514395
MBL should add z_offset regardless of fade (#10308) 7 years ago
Marcio Teixeira 8bc93c6f2b Improve heating/cooling LCD messages (#10293) 7 years ago
GMagician 21a47b50f4 Additional tool-change fixes (#10304)
Followup to #10257
7 years ago
Scott Lahteine f68b4265a6 Fix a probe pin definition 7 years ago
Yunhui Fu a019eebdd6 support utf8 unicode for test language (#10220) 7 years ago
Scott Lahteine 656219d867 Add configs for Creality CR-8 7 years ago
Karl Andersson 7cbbc2af7a [2.0.x] Optional heater signal inversion (#10260) 7 years ago
Marcio Teixeira 4d1a61335c [2.0.x] Fixed Makefile for Marlin 2.0 (#10255) (#10281)
* Fixed Makefile for Marlin 2.0 (#10255)

- Makefile now supports the new Marlin 2.0 directory hierarchy.
- RELOC_WORKAROUND is now automatically enabled based on avr-gcc version.

* Makefile support for U8glib and TMC2130Stepper

- Updated paths for oliver's U8glib 1.19.1
- Added option for teemuatlut's TMC2130Stepper 2.2.1
7 years ago
Scott Lahteine 241996d5d6
Merge pull request #10257 from thinkyhead/bf2_tool_change_debug 7 years ago
Scott Lahteine 4c79dc1093 Fix a Serial+EEPROM compile error
Fixes #10278
7 years ago
Scott Lahteine 93305a2d5e Fix some spellings 7 years ago
Scott Lahteine adcb87f0db Z Endstop Servo => Z Probe Servo 7 years ago
Scott Lahteine 4f0eafce8f Add more AVR boards to Makefile 7 years ago
Scott Lahteine 4a23069de9 Fix Ender 4 / CR-8 compilation
- Assign 243 (like EFB) as Ender-4/CR-8 board ID
- Add to `Makefile`
- Add to `pins.h`
7 years ago
Scott Lahteine 02f0f95d40
Handle disabled HYBRID_THRESHOLD in EEPROM (#10275) 7 years ago
Scott Lahteine 9ec2c03c5b Fix likely error in retract/recover
Addressing #10200
7 years ago
Scott Lahteine 49f384a2ab Note about MKS_MINI_12864 in sanitycheck 7 years ago
Scott Lahteine 2672120a97 Do a small raise for all move-back 7 years ago
Scott Lahteine 5acccbacc1 Simplified leveling-based tool change 7 years ago
Scott Lahteine 1a75165f35 For set_z_fade_height use set_bed_leveling_enabled 7 years ago
Scott Lahteine d1734a089a Split up tool_change for some setups 7 years ago
Scott Lahteine a9f94f260a Some RADDS pin updates 7 years ago
Scott Lahteine 31df43212c Use lcd_printPGM_utf in more places
Fix #10256
7 years ago
Scott Lahteine 7d8a46519f Output ABC for delta stepper counts 7 years ago
Scott Lahteine 6098efcc59 Use float62 for LCD edit of Z Fade 7 years ago
Scott Lahteine f6d13e2295 Allow Z_SAFE_HOMING sanity checks to handle floats 7 years ago
Scott Lahteine 889fd5f71f Backtrace minor cleanup 7 years ago
Scott Lahteine 53f0c7522a Symmetrical FWRETRACT Z Hop
Do the Z lift normally before setting Z back to its prior value. But do the Z lower using spoofing. This should produce proper symmetrical movement.
7 years ago
Scott Lahteine ac7e97f4fe Change order of inactive stepper disable/enable
This ensures that steppers that share an enable pin will only be disabled for a miniscule time.
7 years ago
Scott Lahteine 55e9b85ad6 Clear the "Wait for user" message set by M0/M1
See https://github.com/MarlinFirmware/Marlin/issues/10246#issuecomment-377146936
7 years ago
Scott Lahteine b6a55f0891 Temporary workaround for tool-change compile error
Pending a more complete solution to tool-change Z deviation.
7 years ago
Scott Lahteine b852781eba Fix BLTOUCH compile error
Followup to #10250
7 years ago
AnHardt c1f58a238d No delay in sensorless quick homing (#10254) 7 years ago
Scott Lahteine 1be955e52a Alert users about low Z jerk values 7 years ago
Scott Lahteine 9e4c037cef
Wait before turning off PRINTER_EVENT_LEDS at print end (#10248) 7 years ago
Scott Lahteine 8b7381b626 Clear sensorless homing in home_delta after first move-to-top 7 years ago
Scott Lahteine dbe2b6f7b0 Do moves towards endstops differently in do_homing_move 7 years ago
Scott Lahteine d573a2cada Fix pins_RAMPS.h for 32-bit platforms
Followup to 436e5b7
7 years ago
Scott Lahteine f04be05a14 "G28 Z Forbidden" => "Home XY first"
Some languages will need to be updated for proper phrasing
7 years ago
Scott Lahteine a97624dd81 Allow pinsDebug "Analog in" long int 7 years ago
Scott Lahteine 7b8bb2519e Fix gcode_line_error call
Followup to 3007eee
7 years ago
Scott Lahteine aa20b3ef7c Fix linear/3-point manual leveling buffer overrun
Fixes #10137
7 years ago
Alexey Shvetsov cbdc78ec0f Fix STM32 compilation with PlatformIO (#10245) 7 years ago
Scott Lahteine 9d2ea5d64b Undo German changes
See 941e9bd329 (commitcomment-28262166)
7 years ago
Scott Lahteine 2bc7f416ee Fix missing comma in tmc_sgt
Fixes #10209
7 years ago
Scott Lahteine 38378cd0e8 M218 with DELTA needs planner.h
Fix #10232
7 years ago
Scott Lahteine 3007eee22e Require a checksum when writing to SD
From #10204 by @adriancuzman
7 years ago
Bob-the-Kuhn 9656a82609 Fix G53/CNC_COORDINATE_SYSTEMS compilation, Travis testing (#10227) 7 years ago
Eduardo José Tagle 749f19e502 [2.0.x] Move backtrace to a shared location (#10237)
- And implement the `backtrace()` function call
7 years ago
xC0000005 7dc256432f Restore STM32F1 series to working order. (#10229)
The `_O2` attribute is no longer needed on the malyanlcd function, and the macros have broken timer numbers - reset this to a function to return the right device. Also fix the bit order cast in SPI.
7 years ago
Rob Power d1f14202a9 [2.0.x] NANODLP_Z_SYNC requires linear axes (#10240) 7 years ago
Scott Lahteine b287560258 Fix say_M603 7 years ago
Scott Lahteine 436e5b7ea3 Apply spacing in pins files 7 years ago
Scott Lahteine 4d533b9baa Update bq Hephestos 2 probe offset
From #10234 by @thopiekar
7 years ago
Bob-the-Kuhn 78df07ac71
Merge pull request #10221 from ejtagle/bugfix-2.0.x
[2.0.x] DUE: Several fixes to the backtracker
7 years ago
etagle 8934a2c49b Added some missing Thumb instructions to the traceback follower, so now it is able to traceback through switch() statements 7 years ago
etagle 328edea03a Several fixes to the backtracer. Tested ant it works 7 years ago
Scott Lahteine aa6dacbbdf German update
Based on #10216
7 years ago
Yunhui Fu 8322a79bb9 update the UTF-8 C strings for Chinsee languages, for Simplified and Traditional Chinese (#10211) 7 years ago
ejtagle 9a24c0ae3f Tons of fixes to the backtracker code, and also added an extra backtracker that does not require unwind tables to work and it is used if unwind tables are absent 7 years ago
Scott Lahteine a891af2f7a Enforce minimum TMC2130 / TMC2208 libs 7 years ago
Bob-the-Kuhn 75b381cd28
Merge pull request #10203 from Bob-the-Kuhn/sanity-check-fix
[2.0.x] Fix TMC sanity checks that always fail
7 years ago
Bob-the-Kuhn 433e984d1f move comment to fix compile error 7 years ago
Bob-the-Kuhn f7857ac8a8
Merge pull request #10185 from ejtagle/bugfix-2.0.x
[2.0.x] DUE debugging: Solve WDT startup delay, add traceback & crash report uses programming port baud rate
7 years ago
Bob-the-Kuhn b756a15aba another needs to be deleted 7 years ago
Bob-the-Kuhn 50c81ebe0d remove check that always fails 7 years ago
Scott Lahteine 3ac135cef3 Enforce minimum TMC2130 / TMC2208 libs 7 years ago
Bob-the-Kuhn 8870f9b1da Fix M503 helper functions following TMC updates (#10197) 7 years ago
Scott Lahteine bb7236a750
Z correction on tool-change for all HAS_MESH (#10199) 7 years ago
Bob-the-Kuhn 509227fd80 change to mode 0 7 years ago
etagle c3b23974bd Added detection of case when no unwind tables are available 7 years ago
Scott Lahteine ea1a83ce41 Use pgm_read_ptr for tables of pointers 7 years ago
Scott Lahteine 9da0797e29 Fix EEPROM size of tmc_hybrid_threshold
Followup to #10102
7 years ago
teemuatlut daf643e1ce [2.0.x] TMC: Match axis label order (#10188) 7 years ago
Roxy-3D 1628a9e864
make data declarations consistent 7 years ago
etagle b210bdf032 Now the Crash reporter uses the configured BAUDRATE to send the report through the Programming port. And also shows the traceback of functions as discussed. For that latest feature to work, you need to compile the project with -funwind-tables and -mpoke-function-name compiler flags 7 years ago
etagle c5730cf711 As Bob-The-Khun suggested, resetting the USB peripheral solves the huge startup delays that happen when a WDT reset happens and we are connected through the native port 7 years ago
Scott Lahteine 1cb810ff1c
[2.0.x] Automatically reset stepper timeout (#10179)
* Automatically reset stepper timeout in manage_inactivity

Any code that adds moves to the planner can skip resetting the stepper timeout. We can let `idle` / `manage_inactivity` reset the timer whenever it detects any moves in the planner.

* blocks_queued => has_blocks_queued
7 years ago
Eduardo José Tagle 97e8a6ebd9 Various fixes for DUE... (#10152)
- Watchdog reset during SD Card initialization.
- Move `DebugMonitor` to `DebugMonitor_Due.cpp`.
- Since the watchdog is enabled on boot do extra resets during init.
- Have `thermalManager` do watchdog reset before its ISR starts to prevent reset.
- Ensure that timers are stopped before reprogramming them to address tone issues.
- Improve SAM3XE reset when reflashed through the native port.
7 years ago
Roxy-3D c3c264978f
correct truncated comment 7 years ago
Scott Lahteine 9fd1016bb1 Trust the bootloader to clear globals 7 years ago
Scott Lahteine 045ee28c50 Tweaks to M915 7 years ago
Scott Lahteine 987597532c For MK2_MULTIPLEXER undef DISABLE_INACTIVE_EXTRUDER
Fix #10098
7 years ago
Scott Lahteine ff304d3767 Allow G53 to go back to native space 7 years ago
Scott Lahteine bc45fb6b13 Tweak use of move_z_after_probing 7 years ago
Scott Lahteine c352954882 Allow no raise after run_z_probe in probe_pt 7 years ago
Scott Lahteine ae39fbd646 Also suppress keepalive with suspend_auto_report 7 years ago
Scott Lahteine 8dfaf1539e
Merge pull request #10102 from thinkyhead/bf2_eeprom_M913
[2.0.x] More complete Trinamic driver options
7 years ago
AnHardt 837ac2fdbd [2.0.x] Fix_Autotune_THERMAL_PROTECTION_BED_off (#10166)
- Fix Autotune Thermal Protection
- Make 2 constants in autotune configurable
7 years ago
Bob-the-Kuhn 785dbfc72d [2.0.x] FASTIO consistency (#10164) 7 years ago
Bob-the-Kuhn 7308ef7809 Add conditional, give DUE SPI a unique name, fix compiler warnings (#10168) 7 years ago
teemuatlut b5b39af531 [2.0.x] TMC: Fix CURRENT_STEP_DOWN (#10170) 7 years ago
Scott Lahteine a5c6d3c7b8 Prevent null pointer crash in Endstops::update
Thanks to Evgeny Kotsuba!
7 years ago
Scott Lahteine a46bac3100 Add 'I' parameter to M906/M913/M914; 'T' to M906/M913 7 years ago
Scott Lahteine cfc13ed7f3 Quiet M906/M913/M914 with axes. Patch for DISTINCT_E_FACTORS. 7 years ago
Scott Lahteine c95450016b Improve Trinamic support in the EEPROM 7 years ago
Scott Lahteine 48d7036874 Consolidate smart stepper driver initialization 7 years ago
Bob-the-Kuhn 53362b81cc Tone fixes/changes (#10151) 7 years ago
Scott Lahteine dd2949922b Consolidate 3-point leveling point options 7 years ago
Scott Lahteine 1d22609473 MIN_PROBE_EDGE replaces DELTA_PROBEABLE_RADIUS 7 years ago
Scott Lahteine eaefc1e410
Add CorePQ support for BABYSTEPPING (#10155) 7 years ago
Scott Lahteine 72281c4ff9 Turn power off in `kill` instead of setting PS_ON to input 7 years ago
Scott Lahteine 9d99360912 Fix matrix.debug output 7 years ago
Eduardo José Tagle bbfbf90797 Fix for DUE - no host support on native USB if SD card not enabled (#10148) 7 years ago
Scott Lahteine 772810fb24 Followup to PORTVAR patch 7 years ago
Scott Lahteine 978f342392 Reduce some tmc_util strings 7 years ago
Scott Lahteine fbdc5ad962 Prevent lcd_update stack overflow on SD Card change 7 years ago
Scott Lahteine c0d694d5d3 Squash UBL postscript comment 7 years ago
Scott Lahteine 93af8aa157
Fix home_delta for SENSORLESS_HOMING (#10145) 7 years ago
Scott Lahteine 0543362b34 Don't init the tone timer if no BEEPER_PIN 7 years ago
Scott Lahteine c6ff39cc14 Spacing cleanup 7 years ago
Scott Lahteine 9e9e29ddf8 Einsy: Regular endstops and BLTOUCH pins
Based on #10131
7 years ago
Bob-the-Kuhn c79b53d406
Merge pull request #10140 from Bob-the-Kuhn/DUE-full-speed
[2.0.x] DUE - add full speed USB native port option
7 years ago
Bob-the-Kuhn 7f1afbfd60 can't type 7 years ago
Bob-the-Kuhn 23760d6c14 add full speed option 7 years ago
Bob-the-Kuhn cbcd1ed42d full speed 7 years ago
Scott Lahteine 6689884910 Easier override of ST7920 LCD timing 7 years ago
Scott Lahteine d603e655d3 Fix SWITCHING_EXTRUDER manual movement 7 years ago
Scott Lahteine 5f77816772 Reduce size of "only one" sanity checks 7 years ago
Scott Lahteine 8922b56b58 Fix some spelingz 7 years ago
Scott Lahteine a6feb58837
Delta support for multiple hotends with offsets (#10118) 7 years ago
TheSFReader 2e43438e0c Add C parameter to M27 to include the long filename
In answer to #10001

Add an option to retrieve the currently open file name (long filename if possible).
7 years ago
Scott Lahteine 2168d6ac25 Allow NULL prepend in lsDive 7 years ago
Scott Lahteine 1e946d681d Update Marlin for newest TMC libraries
- TMC2130Stepper v2.2.0
- TMC2208Stepper v0.0.4
7 years ago
shaktee 63fc4a8521 BIBO2 default update and Cyclops config (#10108) 7 years ago
etagle 404fc94705 DUE USB CDC: Do not send any character if no program on the PC is listening to them. This avoids Marlin waiting until the user actually opens a program that is able to consume the output of Marlin 7 years ago
Scott Lahteine 4aebe3d82e Pretty up EEPROM port args 7 years ago
Scott Lahteine 51bf3c9503 Fix E direction for MK2_MULTIPLEXER with LIN_ADVANCE 7 years ago
teemuatlut e6dcfa64b0 Cast SERIAL_CHAR to void in M122 (#10086) 7 years ago
Marcio Teixeira c24dbcbfe1 When STATUS_EXPIRE_SECONDS is 0, hide the position. (#10081)
Some users may prefer to hide the position updates on the `LIGHTWEIGHT_UI` altogether. This leads to an even less cluttered display (it also saves on SPI traffic and one byte of RAM).
7 years ago
Studiodyne e7a61de8af [2.0] FWRetract Reset (Best way) (#10083) 7 years ago
Scott Lahteine f894209de2
Merge pull request #10093 from thinkyhead/bf2_trinamic_config
[2.0.x] Clean up Trinamic config options, sanity check
7 years ago
Scott Lahteine f1327fd5f9 Use lcd_goto_previous_menu_no_defer more 7 years ago
Scott Lahteine e7570f3195 Improve TMC config organization, naming 7 years ago
Scott Lahteine 374ea49be9 Revert marlinAnalogInputToDigitalPin 7 years ago
Scott Lahteine 34f656decd Add TMC2208 include in tmc_util.h 7 years ago
Scott Lahteine 07cf2cd9c4 Fix sensorless_homing_per_axis compile warning 7 years ago
Scott Lahteine b858c638ad Fix compiler warning for HAL_ANALOG_SELECT 7 years ago
Bob-the-Kuhn c4467da53a
Merge pull request #10063 from ejtagle/bugfix-2.0.x
[2.0.x] DUE - add programming capability to native port
7 years ago
Scott Lahteine 65ce0303f8 Fix MKS_12864_OLED blank issue
Fixes #10071
7 years ago
Scott Lahteine 36452b4d6e Fix filename HAL/DUE/servotimers.h => ServoTimers.h 7 years ago
Scott Lahteine 14c03cb6f4
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10069)
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
7 years ago
Scott Lahteine 5dec828abc Add MKS_12864OLED to lcd_implementation_init
Followup to #7914
7 years ago
Scott Lahteine 468f34104b Patch do_blocking_move_to so 'destination' can be used 7 years ago
Scott Lahteine 5b45aab262 M218: report with no parameters 7 years ago
Scott Lahteine 18de11c1ea Followup to auto-assign of dual axis CS pins 7 years ago
ejtagle 703c8ac0ef Added Arduino-compatible kludge to the (ATMEL supplied) SAM3X USB stack we are now using so the Native port is also usable as a programming port on Arduino DUE and derived designs 7 years ago
Scott Lahteine 28f1276286
[2.0.x] Add Z_AFTER_PROBING option (#10058)
Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
7 years ago
Scott Lahteine dd19e74476 Cleanup trailing whitespace
@Bob-the-Kuhn — Please set your git options to remove trailing whitespace on commit.
7 years ago
Scott Lahteine d0ac0151b6 Fix typo in ubl.prepare_segmented_line_to 7 years ago
Scott Lahteine d385b9aac7
Auto-assign CS pins for X2, Y2, Z2 (#10057)
Fixes #9211
7 years ago
Scott Lahteine bae1cb859c Patch flush_and_request_resend for 1.1.x parity 7 years ago
Scott Lahteine 51ebdf3b7d Finish scroll_screen with menu direction/multiplier
Fixes #10041
7 years ago
Bob-the-Kuhn 0d8c15c01f restore PR 9661 files & V1 fix 7 years ago
Scott Lahteine 751785fc97 Followup to recent patches
- `M666` is static, not inline
- Disambiguate some stepper macros
7 years ago
Scott Lahteine a0211f5d6c Disambiguate else in stepper_indirection.h 7 years ago
Scott Lahteine f003173752 Fixup M666
Followup to d6df032
7 years ago
Bob-the-Kuhn bf59a4a6df
Revert "[2.0.x] DUE compatibility with shared SPI LCDs, USB mass storage, add pin defs & update examples\MakerParts\Configuration.h" 7 years ago
Sebastianv650 fd1d590726 [2.0.x] Silence M204 (#10037)
`M204` is often used by slicers to set acceleration depending on perimeter, infill, etc., so Marlin's answers are flooding the serial windows. Silence `M204` according to the philosophy that setter commands should only send a reply if no parameter is given.
7 years ago
Scott Lahteine f10c87b442 Update Endstops class for 1.1.x parity 7 years ago
Scott Lahteine d6df0322c2 Update M666 for XYZ dual endstops 7 years ago
Scott Lahteine fbc41c0e98 Update Marlin G-code summary 7 years ago
Scott Lahteine 239902f861 Fix E2END and add EEPROM to Smart RAMPS
Reference #9983
7 years ago
Scott Lahteine ddce486360
Merge pull request #10032 from thinkyhead/bf2_unknown_z_no_raise
[2.0.x] Add UNKNOWN_Z_NO_RAISE to prevent Z grinding
7 years ago
Scott Lahteine 79e6d890d5 Add UNKNOWN_Z_NO_RAISE to example configs 7 years ago
Scott Lahteine 419d12ca1b Add UNKNOWN_Z_NO_RAISE option
With this option enabled, Z won't ever be raised until after `G28` has been completed, and it won't raise if Z becomes unknown. This is good for machines whose beds fall when Z is powered off.
7 years ago
Scott Lahteine 3b4c89e4b5 Move do_probe_raise closer to set_probe_deployed
…and limit the raise to Z_MAX_POS
7 years ago
Scott Lahteine 2908e76151 Fix position_is_reachable_by_probe typo, add comment
Fix #10029
7 years ago
Roxy-3D 26dc594ebb prevent steppers from turning off during manual probes 7 years ago
Bob-the-Kuhn d8eadf3796 fix ubl_G29.cpp Travis error 7 years ago
Bob-the-Kuhn 914bb80bde removed SDSS init
added device & comm drivers for shared SPI LCDs

mistyped some updates in ultralcd_impl_DOGM.h

remove unwanted changes in onfiguration.h

still can't type

Update HAL_LCD_class_defines.h

include USB mass storage & misc
7 years ago
Scott Lahteine 6d9ea7e184 Fix position_is_reachable_by_probe typo, add comment
Fix #10029
7 years ago
Roxy-3D 646dd5554c
prevent steppers from turning off during manual probes 7 years ago
Scott Lahteine 161ff9ff35 Fix UPDATE_ENDSTOP for CorePQ compatibility
Fixes #9939
7 years ago
Scott Lahteine 49ca67202f Patch configuration_store for extra serial port
Fix #9948
7 years ago
Scott Lahteine cc59ac4603 Fix _tmc_say_axis string address
Fixes #10003
7 years ago
Scott Lahteine 16a8edc5f0 Add more delay before pulse off in Linear Advance ISR
A capital idea from https://github.com/MarlinFirmware/Marlin/pull/9914#issuecomment-371614153
7 years ago
Scott Lahteine dfd5d2fe75
Have position_is_reachable_by_probe use the whole bed (#10020)
Previously `position_is_reachable_by_probe` was limited to the area specified for `G29` mesh leveling (even if leveling was disabled). This change will properly consider the entire bed area so that `G30` and other non-leveling probing may take place.
7 years ago
Bob-the-Kuhn 67a17446f2 Fix DUE incompatible enum type specification (#10017) 7 years ago
Bob-the-Kuhn 3c58ca181c [2.0.x] Correct step pulse width on LPC1768, DUE & Teensy35_36 (#10016) 7 years ago
Scott Lahteine e297748b22 Apply const, safe_delay in servo.* 7 years ago
Scott Lahteine 3c2bfa5e53
Update powersupply_on in power_on/off (#10015)
Fix #10004
7 years ago
Scott Lahteine 42608b1925 Init old_red to 127 to ensure initial change
Fix #10012
7 years ago
Scott Lahteine 317673fec3 Init watchdog last in setup() 7 years ago
Scott Lahteine 8d32fd997f Wrap NORM_E_DIR/REV_E_DIR macros in do{}while(0) 7 years ago
Scott Lahteine 1913c37a91 Tweak to manual move eindex arg 7 years ago
Scott Lahteine 98d48fc731 Followup to HAL_timer_restrain
Followup to #9985
7 years ago
Scott Lahteine 03e3011332 Fix compile error with MAX_MESSAGE_LENGTH
Fix #9988
7 years ago
Bob-the-Kuhn 6b4a928145 2uS default step pulse (#9989) 7 years ago
Scott Lahteine ca577c1638 Fix up various spacing, comments, and typos 7 years ago
Scott Lahteine d45f19d385 Remove Unicode from var name 7 years ago
Scott Lahteine 224688cc3b Fix for unicode-ignorant gcc preprocessor 7 years ago
Chris Pepper a1a88ebabc HAL function to ensure min stepper interrupt interval (#9985) 7 years ago
Scott Lahteine be0e100fed Fix sd subdirectory encoder position
Followup to 7e386c7
7 years ago
Bob-the-Kuhn 04dedc7ed8 always completely initialize display (#9981) 7 years ago
Scott Lahteine 0149680f54 Fix compile error with char LCD 7 years ago
Scott Lahteine 9515e5aefb Fix LA_active_extruder (static) 7 years ago
Scott Lahteine e5ec793f7e Wrap stepper indirection macros 7 years ago
Sebastianv650 5b85464791 Fix for LA (#9964)
Missed in the original LA 1.5 PR: eISR has to use a local copy of
current_block->use_advance_lead because it might still run wenn the last
block has been set to NULL.
7 years ago
Scott Lahteine 7e386c7e98 Fix encoder position for sddirectory 7 years ago
Scott Lahteine 1d604be671 Suspend auto-report during UBL map output 7 years ago
Scott Lahteine eb212ae073 Add suspend_auto_report flag to suppress auto-report 7 years ago
Scott Lahteine ffbf63e6af Add HAS_TEMP_SENSOR conditional 7 years ago
Scott Lahteine 94f5204629 Move AUTO_REPORT_SD_STATUS to SDSUPPORT block 7 years ago
Scott Lahteine 22a017a856
Rebuild SD file sort array on Stop SD Print (#9976)
Thanks Chuck Hellebuyck.
7 years ago
Scott Lahteine 920d92aa46
Merge pull request #9974 from thinkyhead/bf2_tmc_util_progmem
[2.0.x] Move tmc_util.* extended_axis_codes to PROGMEM
7 years ago
Scott Lahteine b198b49d15 Followup to AUTO_REPORT_SD_STATUS
Followup to #9832
7 years ago
Scott Lahteine 2057177184 Make enums into implicit char 7 years ago
Scott Lahteine e28e3bb532 Move extended_axis_codes to PROGMEM 7 years ago
Scott Lahteine ca0def766e LIN_ADVANCE single stepper optimization 7 years ago
Scott Lahteine 8291ae34f2 Support duplication mode in LIN_ADVANCE 7 years ago
Scott Lahteine b08ec22fe1
Show E0-E4 in monitor_tmc_driver output (#9969)
Fix #9966
7 years ago
Marcio Teixeira fd883c909a Improvements to Lightweight ST7920 status screen. (#9952)
- Show units on lightweight status screen.
- Fixed progress bar so it works with M73
7 years ago
Scott Lahteine 0dd1c4458d
Put more code between pulse start and stop (#9959) 7 years ago
Scott Lahteine f9cafc4001
Fix menu highlight glitch, tweak scrolling code (#9957) 7 years ago
Scott Lahteine bf9fc8ac0e M851 - report only without parameters 7 years ago
Scott Lahteine eb867817b5
Prevent filament runout false positives (#9946) 7 years ago
Scott Lahteine 36262a0479
Use static classes for job timers (#9938) 7 years ago
Scott Lahteine 930720bbbb
Fix broken reverse planner (#9943)
From #9914 by @Sebastianv650
7 years ago
Bob-the-Kuhn 025118da3e Init print_job_timer in setup() instead of "early" (#9937) 7 years ago
Scott Lahteine beeed580b8
Implement digipots for MKS SBASE (#9927)
Fix #9477
7 years ago
Scott Lahteine 07ae23fe14 No pulse delay on last e_steps in advance isr 7 years ago
Scott Lahteine 881529a401 Fix #9904 - toDigital should show 00-99 hours 7 years ago
Scott Lahteine ed758de80d tweak comment in stepper.cpp 7 years ago
Scott Lahteine d1dc863962 autotemp_factor is not value_celsius_diff
See https://github.com/MarlinFirmware/Marlin/issues/9852#issuecomment-369861822
7 years ago
Thomas Moore f3914a432e Clear retracted status when homing the Z axis 7 years ago
Scott Lahteine 6d7f4f84e2
Add board MKS_BASE_HEROIC (#9926)
Followup to #9008

- Don't define micro-stepping pins for boards that lack them.
- Allow setting of 128 microsteps with `M350`.
7 years ago
Scott Lahteine 649f375494
Fix: M112 calling kill from interrupt (#9923)
Fix #9906
7 years ago
Scott Lahteine c37b3f995a Sanity-check some graphical LCD-only options 7 years ago
Scott Lahteine a2a672449a Updated boot screen description 7 years ago
Scott Lahteine 61620cbd15 Tweak M211 7 years ago
Scott Lahteine 6e08ddce6e Correct M401 / M402 description 7 years ago
Studiodyne 23a576faf7 [2.0] Fix for FW retract (#9878) 7 years ago
Ben Lye 461c8ef834 Fix DIGITAL_PIN_TO_ANALOG_PIN macro for Atmega1284p (#9881) 7 years ago
Scott Lahteine 88b6a15b47 Update M900 verbiage 7 years ago
Ben Lye e2df286444 Update pinsDebug.h (#9874)
Fix display of analog input value.
7 years ago
Scott Lahteine 91db7930dc Drop SCARA_FEEDRATE_SCALING
The updated planner takes the length of the move, so this pre-calculation is no longer needed.
7 years ago
Bob-the-Kuhn c1f4112bdc [2.0.x] Add 1284 support & misc. bug fixes (#9864) 7 years ago
Scott Lahteine 118899357d
Add sanity checks to Linear Advance 1.5 (#9873) 7 years ago
Scott Lahteine 1746749361 Followup to #9868 7 years ago
Scott Lahteine a446433c87
Fix SENSORLESS_HOMING for Core Kinematics (#9868) 7 years ago
Scott Lahteine 2d1233b86c Fix lcd_quick_feedback call for BTN_BACK 7 years ago
AnHardt eb8b758226 Fix some mapper, charsize problems (#9866) 7 years ago
Scott Lahteine 8bffb26c23 Fix manual move position display
Manual moves now correctly include the workspace offset.
7 years ago
Scott Lahteine 8c03ce4d80 Fix Z safe homing sanity check for no probe
Fix #9851
7 years ago
Scott Lahteine c471389afb
Add Einsy Rambo pins (#9850) 7 years ago
Zachary Hill c22f8dd660 Get duration_t in printcounter.h for its clients (#9843) 7 years ago
Scott Lahteine 24b9c1923f ubl G29 tweaks 7 years ago
Scott Lahteine bd0967ad87 Fix BTN_BACK
Followup to #9835
7 years ago
Scott Lahteine d9a98b5814 Russian language update
From #9849
7 years ago
Ben Lye 461cb22069 Fix Zonestar / ADC keypad with RAMPS. (#9840) 7 years ago
Scott Lahteine 35ec67885a
Add support for BACK button (RADDS) (#9835) 7 years ago
Scott Lahteine 0bc4c216ac Patch up pinsDebug pins 7 years ago
Scott Lahteine cd7dc49527 Fix CR-10 status screen missing commas
Fix #9660
7 years ago
geigerg 4817c78a65 Add files via upload (#9828) 7 years ago