Low Point for delta calibration (#10363)

Marlin/src/gcode/calibrate/G33.cpp

@@ -137,7 +137,7 @@ static void G33_cleanup(
 
 inline float calibration_probe(const float nx, const float ny, const bool stow) {
   #if HAS_BED_PROBE
-    return probe_pt(nx, ny, stow ? PROBE_PT_STOW : PROBE_PT_RAISE, 0, true);
+    return probe_pt(nx, ny, stow ? PROBE_PT_STOW : PROBE_PT_RAISE, 0, false);
   #else
     UNUSED(stow);
     return lcd_probe_pt(nx, ny);

Marlin/src/module/probe.cpp

@@ -539,28 +539,15 @@ static bool do_probe_move(const float z, const float fr_mm_m) {
  *
  * @return The raw Z position where the probe was triggered
  */
-#define HAS_CALIBRATION_PROBE (ENABLED(DELTA_AUTO_CALIBRATION) && Z_PROBE_LOW_POINT < 0)
-static float run_z_probe(
-  #if HAS_CALIBRATION_PROBE
-    const bool is_calibration
-  #endif
-) {
+  static float run_z_probe() {
 
   #if ENABLED(DEBUG_LEVELING_FEATURE)
     if (DEBUGGING(LEVELING)) DEBUG_POS(">>> run_z_probe", current_position);
   #endif
 
-  #if Z_PROBE_LOW_POINT < 0
-    // Stop the probe before it goes too low to prevent damage.
-    // If Z isn't known or this is a "calibration probe" then probe to -10mm.
-    #if !HAS_CALIBRATION_PROBE
-      constexpr bool is_calibration = false;
-    #endif
-    const float z_probe_low_point = !is_calibration && axis_known_position[Z_AXIS] ? -zprobe_zoffset + Z_PROBE_LOW_POINT : -10.0;
-  #else
-    // Assertively move down in all cases
-    constexpr float z_probe_low_point = -10.0;
-  #endif
+  // Stop the probe before it goes too low to prevent damage.
+  // If Z isn't known then probe to -10mm.
+  const float z_probe_low_point = axis_known_position[Z_AXIS] ? -zprobe_zoffset + Z_PROBE_LOW_POINT : -10.0;
 
   // Double-probing does a fast probe followed by a slow probe
   #if MULTIPLE_PROBING == 2
@@ -645,14 +632,14 @@ static float run_z_probe(
  *   - Raise to the BETWEEN height
  * - Return the probed Z position
  */
-float probe_pt(const float &rx, const float &ry, const ProbePtRaise raise_after/*=PROBE_PT_NONE*/, const uint8_t verbose_level/*=0*/, const bool is_calibration/*=false*/) {
+float probe_pt(const float &rx, const float &ry, const ProbePtRaise raise_after/*=PROBE_PT_NONE*/, const uint8_t verbose_level/*=0*/, const bool probe_relative/*=true*/) {
   #if ENABLED(DEBUG_LEVELING_FEATURE)
     if (DEBUGGING(LEVELING)) {
       SERIAL_ECHOPAIR(">>> probe_pt(", LOGICAL_X_POSITION(rx));
       SERIAL_ECHOPAIR(", ", LOGICAL_Y_POSITION(ry));
       SERIAL_ECHOPAIR(", ", raise_after == PROBE_PT_RAISE ? "raise" : raise_after == PROBE_PT_STOW ? "stow" : "none");
       SERIAL_ECHOPAIR(", ", int(verbose_level));
-      SERIAL_ECHOPAIR(", ", is_calibration ? "nozzle" : "probe");
+      SERIAL_ECHOPAIR(", ", probe_relative ? "probe" : "nozzle");
       SERIAL_ECHOLNPGM("_relative)");
       DEBUG_POS("", current_position);
     }
@@ -660,7 +647,7 @@ float probe_pt(const float &rx, const float &ry, const ProbePtRaise raise_after/
 
   // TODO: Adapt for SCARA, where the offset rotates
   float nx = rx, ny = ry;
-  if (!is_calibration) {
+  if (probe_relative) {
     if (!position_is_reachable_by_probe(rx, ry)) return NAN;  // The given position is in terms of the probe
     nx -= (X_PROBE_OFFSET_FROM_EXTRUDER);                     // Get the nozzle position
     ny -= (Y_PROBE_OFFSET_FROM_EXTRUDER);
@@ -684,11 +671,7 @@ float probe_pt(const float &rx, const float &ry, const ProbePtRaise raise_after/
 
   float measured_z = NAN;
   if (!DEPLOY_PROBE()) {
-    measured_z = run_z_probe(
-      #if HAS_CALIBRATION_PROBE
-        is_calibration
-      #endif
-    ) + zprobe_zoffset;
+    measured_z = run_z_probe() + zprobe_zoffset;
 
     if (raise_after == PROBE_PT_RAISE)
       do_blocking_move_to_z(current_position[Z_AXIS] + Z_CLEARANCE_BETWEEN_PROBES, MMM_TO_MMS(Z_PROBE_SPEED_FAST));

Marlin/src/module/probe.h

@@ -40,7 +40,7 @@
     PROBE_PT_STOW,  // Do a complete stow after run_z_probe
     PROBE_PT_RAISE  // Raise to "between" clearance after run_z_probe
   };
-  float probe_pt(const float &rx, const float &ry, const ProbePtRaise raise_after=PROBE_PT_NONE, const uint8_t verbose_level=0, const bool is_calibration=false);
+  float probe_pt(const float &rx, const float &ry, const ProbePtRaise raise_after=PROBE_PT_NONE, const uint8_t verbose_level=0, const bool probe_relative=true);
   #define DEPLOY_PROBE() set_probe_deployed(true)
   #define STOW_PROBE() set_probe_deployed(false)
 #else