a733537ddd
Missed some variable declarations
...
Integrated fixes from henrikbrixandersen pull request #504
12 years ago
f4f30c9d64
Added servo actuated enstop coding to allow G28 command to engage and retract a servo to specified angles.
12 years ago
79374f0b93
Merge branch 'reisnyderb' of https://github.com/ErikZalm/Marlin into Marlin_v1
12 years ago
da05b3ba94
faster GLCD (ST7920 SW-SPI) implementation / fixes
...
- fixed long menu entries (>14 or >18 chars) caused overrun in dogm lcd
implementation
- fixed pin set problem when in interrupt
- much faster ST7920 SW-SPI implementation
- increased ST7920 framebuffer size for more speed
12 years ago
4b19c8552e
Fixing changed Configuration.h settings to be default values per ErikZalm Request.
12 years ago
971ec35135
Expanded M302 to allow setting the temp
12 years ago
5090c56651
More redundant temp sensor changes. (After testing and debugging by reifsnderb)
12 years ago
16b9239a26
Report temperatures for all extruders
12 years ago
a964b3cf3d
Merge pull request #495 from Gatulibu/Marlin_v1
...
Added support for Megatronics v2.0 and Minitronics v1.0
12 years ago
e8572c5239
Fix: Long menu entries (>14 or >18 chars) caused overrun in hitachi display implementation
12 years ago
7ee70c2248
Fix: removed wrong ; at end of define
12 years ago
b78fa6bb70
Added support for Megatronics v2.0 and Minitronics v1.0
...
merged from code downloaded from reprapworld.com
12 years ago
9be61cdc02
Added redundant temp sensor
12 years ago
7231a20dba
Put #ifdef around servo pins in pins.h. This allows the pins to be used for M42.
12 years ago
e2ff536b03
Fixed typo in Comment
12 years ago
40eb07bad4
Revert and extend previous change pin check change
...
Reviert previous change of #if BLAH_PIN > 0 to #if defined(BLAH_PIN) &&
BLAH_PIN > -1. Unfortunately some times pin 0 is used. For my sins I've
gone through and replaced all unsafe checks of #if BLAH_PIN > -1 with
the safe version.
12 years ago
bd33cf4a9f
fixed typo / added "const" to defines for newer gcc compatibility
12 years ago
567291e734
Merge pull request #485 from Banjer/Panelolu2_Melzi
...
Add Panelolu2 support for Melzi
12 years ago
8d80cbbf4c
fix broken LCD commit #dfa549f268 from buildrob - GLCD/DOGM implementation was ignored
12 years ago
98d0d48191
fixed merge
12 years ago
bbe67fca5a
soft tab correction
12 years ago
9eeb711c96
Merged from Upstream Master
12 years ago
424101110c
Add Panelolu2 support for Melzi
12 years ago
0d4a9444c4
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
12 years ago
86cce025f4
Added #ifdef NUM_SERVOS to servo.cpp
12 years ago
03141a5ef4
LCD: Added Deadzone at 100% Feedrate
...
This adds a deadzone at 100% Feedrate when changing it at the status
screen/main menu. Prevents from unwanted feedrate-changing when
navigating back to the main menu and makes it easier to return to 100%.
12 years ago
28ada096e2
Adding servo documentation
12 years ago
4121311b9d
Change to LCD status indicators
...
The I2C LCD status indicators now indicate when the hotends or bed are
turned on at all (rather than just when they are in their heating phase)
12 years ago
dfa549f268
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
12 years ago
64360164ad
Merge pull request #482 from codexmas/Marlin_v1
...
servosupport
12 years ago
86405cdd11
Merge pull request #479 from MStohn/thermocouple
...
BUGFIXES for temperature.cpp / add RUMBA thermocouple support
12 years ago
6c45c3f4e7
BariCUDA changes
12 years ago
96624f0f31
Forgot to include reference to Servo in makefile
12 years ago
dc59f07d24
First attempt at refactoring of original servo code. Only adding servo support as a start to keep things simple.
12 years ago
b668cb0516
Adding in clean copies of Servo library from Arduino 1.0.4
12 years ago
95dff34b73
fixed wrong compare for min temp check of heater 1 and heater 2
12 years ago
4cc6f9f6de
fixed wrong pin initialization when using temperature 2 pin input
12 years ago
61a48cc662
Add support for RUMBA thermocouple add on
12 years ago
9cc15876be
Add support for RUMBA thermocouple add on
12 years ago
c9cf2174dd
Merge pull request #474 from xifle/Marlin_v1
...
Fixed "Cooldown" Selection not reseting bed temp
12 years ago
bd2cd4903e
Added #ifdef BARICUDA around the BariCUDA changes
12 years ago
37f3199df3
fixed problems in planner with solenoids for BariCUDA when set to 0
12 years ago
fbd899a37d
Support for BariCUDA Paste Extruder derived from MakerBot Frostruder. Using Ultimachine RAMBo board. M126/M127 and M128/M129.
12 years ago
29bb8d7d4f
Fixed "Cooldown" Selection not reseting bed temp
...
- enquecommand with multiple lines "\n" doesn't work -> M140 S0 didn't
get processed. So I wrote a new func for the cooldown which uses
setTargetHotend. In addition this does return to status page after
selection.
- Added setWatch() to preheat-functions (Temperatur sanity check
would never have worked when preheating from the lcd panel)
12 years ago
015d0594b0
Optimize menu selection for Viki rotary encoder.
...
The Viki LCD rotary encoder uses a different number of steps per
rotation. This fixes the seeming "missed" steps when selecting a menu.
12 years ago
2739c26c4f
changes:
...
- changed the variables from keypad to reprapworld_keypad
- added a missing ifdef check
12 years ago
6fb9573157
added support for the reprapworld keypad
12 years ago
594193c908
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
12 years ago
1fa61c297e
Turning off Control Panel by Default and Updating the link to the LiquidCrystal_I2C library to avoid confusion.
12 years ago
b27a59f41e
Added support for Elefu RA Board and Elefu Control Panel
12 years ago
a65a26d6b4
If CORE_XY is in use X and Y Axis had to be activated at the same time
12 years ago
db2f157a22
Replace the <= to < in the Command M907, M350 and M351.
...
The for loop for Axis count over the Array.
Add a break after M907
12 years ago
a5cd582665
Support for 10 level deep SD folder hierarchy
12 years ago
fc4ab05157
Solved minor bug in controllerFan()
...
Extruder 2 was checked where extruder 1 should be checked.
12 years ago
0ef54f2f85
Make M303 silent when "S0" is sent
...
If S is left out perhaps it should be silent, but check the spec for
this M code.
12 years ago
a200521eab
Added CUSTOM_MENDEL_NAME option to Configuration.h and language.h
...
Also cosmetic comment changes and spelling corrections in printed
messages
12 years ago
1a397825f9
fix DEFAULT_AXIS_STEPS_PER_UNIT minor Z rounding error
12 years ago
289c02eda4
Remove unnecessary pin initialization in stepper.cpp
...
(duplicates initialization in Marlin_main.cpp)
12 years ago
d5ad7a0814
Rework change to incorporate CONTROLLERFAN
...
Also refactor extruder auto fan logic to simplify further and now only
check every 2.5 seconds
12 years ago
c3cdaceab3
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
12 years ago
1c127217df
Make DOGLCD merge neater.
12 years ago
7f57f28ccc
Add lcd_buzz function to ultralcd.h so that non-LCD code can make use of lcd's buzzer.
...
Argument order of lcd_buzz was set to mirror that on tone(). Change
default M300 frequency to something audible.
12 years ago
788d62bcc4
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
...
Conflicts:
Marlin/Marlin.pde
Marlin/ultralcd.cpp
Marlin/ultralcd_implementation_hitachi_HD44780.h
12 years ago
d71f1e9bf6
Add (as an option) slower SD transfer mode
12 years ago
db5bb8546d
Merge pull request #452 from MStohn/Marlin_v1
...
128x64 RepRapDiscount Full Graphic Smart Controller support
12 years ago
4b2ece159b
Merge pull request #453 from brackendawson/Marlin_v1
...
Make Gen7 1.4+ heater temp sensort pins match silkscreen.
12 years ago
d5ee2a5a62
Make Gen7 1.4 heater pins match silkscreen
12 years ago
7ac6d7f78e
FIX: Speedup - no explicit display clear needed in u8glib
12 years ago
13596e8722
Added RepRapDiscount FULL GRAPHIC Smart Controller
12 years ago
3a6abe1d6e
Removed STB custom font hack from u8glib library and moved to marlin project
12 years ago
16afbf9bfa
FIX: adopted latest changes from hitachi implementation
12 years ago
34bca48b98
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
12 years ago
ac52dcc174
Updated the card menu and watch messages to make it more informative.
12 years ago
31bb3fb297
Fix: Build error when EEPROM_SETTINGS is defined and PIDTEMP is undefined
12 years ago
c80a78bb70
Lower the default max E feedrate a bit. With the stepper fix this is much to high.
12 years ago
5d5909fc25
Fix failure to compile with heated bed: remove call to non-existant scaleBedPID().
12 years ago
93f0463b21
Allow Edit menu to call fn after edit; Fix PID Ki and Kd display in menus; Actually use changed PID and Max Accel values
...
Add new 'callback' edit-menu types that call a function after the edit is done. Use this to display and edit Ki and Kd correctly (removing the scaling first and reapplying it after). Also use it to reset maximum stepwise acceleration rates, after updating mm/s^2 rates via menus. (Previously, changes did nothing to affect planner unless saved back to EEPROM, and the machine reset).
Add calls to updatePID() so that PID loop uses updated values whether set by gcode (it already did this), or by restoring defaults, or loading from EEPROM (it didn't do those last two). Similarly, update the maximum step/s^2 accel rates when the mm/s^2 values are changed - whether by menu edits, restore defaults, or EEPROM read.
Refactor the acceleration rate update logic, and the PID scaling logic, into new functions that can be called from wherever, including the callbacks.
Add menu items to allow the z jerk and e jerk to be viewed/edited in the Control->Motion menu, as per xy jerk.
Conflicts:
Marlin/language.h
12 years ago
4fa2260a59
Fixed cardreader.h to resolve issue #440 (Pull Request #425 missing file)
12 years ago
038d405254
Corrected #endif in language.h
12 years ago
443aaa30bf
Removed GIT fragments
...
Seems that there was something wrong while merging
12 years ago
7f622467fc
Merge pull request #425 from kefir-/m928_logging
...
M928 logging
12 years ago
86867928ac
Merge pull request #434 from DDRBoxman/Marlin_v1
...
Add support for M300: Play beep sound
12 years ago
9a38cad6f0
Merge pull request #430 from STB3/GLCD_128x64_dots
...
Final task of the 128x64dots GLCD implementation
12 years ago
7a5c474d91
Update Configuration.h
12 years ago
4e448b700a
Merged fetched files from Marlin_v1 branch
...
Pull requests: #414 #433 #432 #428
12 years ago
9f2862ce48
Merge pull request #414 from whosawhatsis/Marlin_v1
...
regenerated thermistor table 7
12 years ago
9fb8bd5685
Merge pull request #433 from whosawhatsis/bang-mode
...
Separate PID_MAX from BANG_MAX
12 years ago
0d075378d5
Add LARGE_FLASH define and enable it for some of the beefier boards
...
The LARGE_FLASH flag allows superfluous features to be excluded
on boards with less memory
12 years ago
9a1c90471f
Ignore unused beeper pins
12 years ago
1a0f889803
Add support for M300: Play beep sound
12 years ago
9322c408c6
Updated for LiquidTWI2 library version 1.2.3
...
The new version of the library means that PANELOLU no longer needs to be
defined in LiquidTWI.h (the library file can be used as is) and the new
version of the library also enables the buzzer on the Panucatt VIKI
panel.
12 years ago
fd5b7e0cec
Separate PID_MAX from BANG_MAX
...
This allows PID_FUNCTIONAL_RANGE to use a maximum duty cycle higher
than PID_MAX. This is useful for powerful heaters to heat quickly in
bang-bang mode, but use a lower duty cycle that is easier to stabilize
in PID mode.
12 years ago
e5a853a3d0
Added automated extruder fan function
12 years ago
72419f69a9
Added rumba
12 years ago
91bea43332
Added rumba pinout
12 years ago
d2b00fe486
Removed html and added rumba
...
Found some unwanted html at the bottom of the file which caused it to not be able to compile.
Also added rumba as machine.
12 years ago
6c66cae694
GLCD init screen cosmetics
12 years ago
f3e0e5184d
Add include selector between char. LCD and GLCD
12 years ago
5d3862f9d1
Modified u8glib logo on welcome screen
12 years ago
0b320f75e9
Removed debug code, add some comments
12 years ago
5f1cd70122
Add code to lcd_update() for GLCD
...
This code selects between the routines for the GLCD or the char.
display.
12 years ago
a49c09a776
Add variable for animated fan, add float conversion w/o sign
...
A new variable was introduced to allow fan animation on the GLCD.
Add additional float to string conversion routine without sign
character. This is used for the coordinates visualisation on the GLCD.
12 years ago
26d8863111
Add library selection between GLCD and char. LCD
12 years ago
4a141a694f
Marlin code for GLCD display
...
This contains the menues, status screen etc...
12 years ago
83c790a020
Add bitmap graphics for GLCD
...
1. Marlin welcome screen
2. Status screen symbols 3 Extruders, heated bed, animated fan logo 1
3. Status screen symbols 3 Extruders, heated bed, animated fan logo 2
12 years ago
233df9cca0
Add missing LF at the end of the file
12 years ago
bb0de75a92
Removed umwanted HTML code ath the end of the file
...
Sorry for that. This does not lead to compile errors. I removed the
unwanted code to make it clean.
12 years ago
7c47e7162d
Adding Maker's Tool Works heated bed thermistor
12 years ago
af78d0cbfa
Merge pull request #1 from illuminarti/Fix_E_Speed
...
Fix step rate bug (especially for retraction)
12 years ago
9a78f321a4
Add pins for Motherboard variant 64
...
These definition contain also the definition for the graphics LCD.
12 years ago
5de25ccd20
Add Motherboard variant 64 - STB V1.1
...
Definition for the graphic LCD are already in it, they will not harm the
configuration as they are only defined constants
12 years ago
d6ce63c49c
Merge pull request #411 from STB3/Marlin_w_STB_Board_support
...
Add STB board support to Marlin (next step towards graphic LCD implementation)
12 years ago
f036be7c4e
Clean up tab/whitespace from last commit
12 years ago
07e11c7cf5
Add command M928 to enable logging to file of received gcode commands
12 years ago
92782f9252
Merge pull request #1 from illuminarti/Fix_E_Speed
...
Fix step rate bug (especially for retraction)
12 years ago
6a61a3c0b4
missing comma in last commit
12 years ago
f0aee4101a
regenerated thermistor table 7
...
Generated with createTemperatureLookup.py. The old table crapped out at
270C, which was a problem for polycarbonate.
12 years ago
aba67e2449
No bed config for RAMPS
...
The motherboard 35 is a config without bed with this pins setting :
D8 Extruder
D9 Fan
D10 Controller Fan
12 years ago
6504e96165
Turn off power supply off-load
...
Disable the high current output and wait a little before to turn off,
because the interrupting capacity of the PSU is unknown.
Could be a function if needed by other.
12 years ago
86bf911139
Toggle menu for PSU from LCD pannel
...
From the prepare menu, accessible when is not printing, you have the
possibility to turn off the PSU when is on et vice versa.
From the host, you can turn off or turn on the PSU then the menu is
updated accordingly.
From the LCD message, the printer status is reported ready or off
respectively when the PSU is on or off.
12 years ago
7bad72359c
Support encoder click on PANELOLU2 being read through I2C
...
This change also handles the case where the pause/stop/restart button on
the VIKI is not used. Make LCD I2C buzz sound the same as the normal
buzz (300ms is too long for quick feedback).
12 years ago
1daf2f3256
Number of extruders is not an advanced configuration - it is a basic property.
12 years ago
f1263d3f88
Further reduce code by using precompiler logic
12 years ago
140e095c6e
Add pins for Motherboard variant 64
...
These definition contain also the definition for the graphics LCD.
12 years ago
b2c1c64fb1
Add Motherboard variant 64 - STB V1.1
...
Definition for the graphic LCD are already in it, they will not harm the
configuration as they are only defined constants
12 years ago
ceb5ee38af
Replaced corrupted language.h file on local PC with current from ErikZalm/Marlin
12 years ago
8efd4cfd73
fixed merge conflict
12 years ago
372e12f83f
Implement automatic extruder/cold-end fan control based on temperature
...
This change allows fan outputs to automatically turn on/off when the
associated nozzle temperature of an extruder is above/below a threshold
temperature.
Multiple extruders can be assigned to the same pin in which case the fan
will turn on when any selected extruder is above the threshold.
It also makes the M42 command compatible with the M106/M107 command.
The majority of the logic in this change will be evaluated by the
compiler at build time (i.e, low code space requirements).
12 years ago
6beb42cdf6
Attempt to address Bernhard's comments
...
Refactor configuration to try to make items clearer (what defines a
panel vs what is user changeable).
12 years ago
839bef6d5d
Fix Configuration.h file to not define LCDs be default.
...
Also fix compile time check in Marlin.pde
12 years ago
1292d735ba
Converge all I2C LCD branches (PANELOLU2, VIKI & PCF8575)
...
This includes refactoring the buttons code to remove a large amount of
non-pin dependent duplication from pins.h.
12 years ago
4eb81a69e6
Only compile the new extruder offset code if you have multiple extruders.
12 years ago
3e9cd334a4
Merge pull request #383 from dob71/jeff
...
Hotend offset handling for multi-extruder machines
12 years ago
67710df9f3
Made i2c mode wok with the hardware I am able to test (ywrobot / sainsmart i2c LCD 2004)
...
Removed incorrect LiquidCrystal_I2C Library
12 years ago
b6209c86dd
Added import of Wire Library to make I2C LCD support compilable
12 years ago
2b567d1df5
Added I2C port expander support to HD44780
12 years ago
06272f463d
Added Config variables for activating I2C LCDs and setting type and address
12 years ago
de3dec7215
Also show the tune menu when USB printing.
12 years ago
73d41c10b9
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into jeff
...
Conflicts:
Marlin/language.h
Marlin/thermistortables.h
12 years ago
63da4dc59a
Merge pull request #398 from DanieleSdei/Marlin_v1
...
Marlin v1, alignment of the Italian language
12 years ago
82e28851bd
Italian language: SD-Card change and SD-Card init
12 years ago
aed5965ad8
Italian language: remove space and some fix
12 years ago
d360846dd4
Update Marlin/language.h
...
Update Polish language #define MSG_RESUMING "Wznawiam drukowanie"
12 years ago
2f60e324dc
Fixed #394
12 years ago
5e2abfcdcd
Merge pull request #391 from STB3/Marlin_with_SD-Card_Change_Menu
...
Add SD-Card change and SD-Card init. for electronics equipped with LCD Display
12 years ago
a0d4e8e78e
Add Messages for SD Card init. & change
12 years ago
bbf0cc1379
Update Marlin/ultralcd_implementation_hitachi_HD44780.h
...
Fix to a bug that I just introduced - sorry. Forgot about offset of string length.
12 years ago
c8f1fbd9d8
Add SD-Card change and SD-Card init.
...
Add SD-Card change and SD-Card init. for reprap electronics without
SD-Chard change detect pin.
12 years ago
71ddb8dc60
Update Marlin/ultralcd_implementation_hitachi_HD44780.h
...
Use all available characters in narrow LCDs < 20 characters.
12 years ago
d2c547c407
Update Marlin/ultralcd_implementation_hitachi_HD44780.h
...
Fix to a minor bug with hardcoded LCD_WIDTH that draws edited values outside of the 16 characters width LCDs.
12 years ago
70871715e4
Added support for extruder offset handling
...
The extruder offset can be specified in the configuration
file or adjusted on the fly using the "M218 T# X# Y#" command.
The EEPROM support is not yet merged in.
The "T#" command can take option "F#" that specifies the feedrate
at which the printing head should be re-positioned. If not
specified the re-positioning move is not preformed immediately,
but the coordinates are adjusted for the printer to properly
position the head when the next movement happens.
12 years ago
49b2ddc8c1
Cleaned up non-standard characters
12 years ago
f8876a7958
Merge pull request #376 from kintel/skip_longfilenames
...
Also skip .files and _files with long filenames. I think its better than before. If somebody dislikes it, or wants additional configuration, it can be done in a future step. Thanks, Marius, and nice to have you helping!
12 years ago
18fcc367d2
Merge pull request #371 from Banjer/Melzi_LED_PIN
...
Chenged LED_PIN for Melzi boards, added comment about broken versions of...
12 years ago
19ce90fe02
Added comment about M42 usage (clean)
12 years ago
00fed0a703
Revert "Extended comment explaining M42 usage"
...
This reverts commit 01541ee64c
12 years ago
e06d820909
Also skip .files and _files with long filenames
12 years ago
01541ee64c
Extended comment explaining M42 usage
12 years ago
f24f02e212
compile fix: quickStop() needs stepper.h
12 years ago
12c41423ad
Fixed typo in comment
12 years ago
0995eaa492
Chenged LED_PIN for Melzi boards, added comment about broken versions of the Sanguino libraries
12 years ago
1d06b10962
Added a feature to have filament change by gcode or display trigger.
...
[default off for now]
syntax: M600 X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
if enabled, after a M600, the printer will retract by E, lift by Z, move to XY, retract even more filament.
Oh, and it will display "remove filament" and beep like crazy.
You are then supposed to insert a new filament (other color, e.g.) and click the display to continue.
After having the nozzle cleaned manually, aided by the disabled e-steppers.
After clicking, the printer will then go back the whole shebang, and continue printing with a fancy new color.
12 years ago
408b349a84
Fixed #368 . Commented out the wrong pin definition, but explained why it is there.
12 years ago
9ecb267b63
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
12 years ago
3cf59f6f9a
add RepRapPro Huxley thermistor tables
12 years ago
c1730e2b08
Merge pull request #363 from yuroller/sanguino_panelolu
...
Panelolu pin assignment for sanguinololu
12 years ago
86358dd6cd
Panelolu pin assignment for sanguinololu from http://reprap.org/wiki/Panelolu
12 years ago
0f3f5d083d
Minor cleanup of the new FAN_KICKSTART code. #334
12 years ago
6ec56fa923
Merge pull request #334 from KevinOConnor/FanKick
...
Add feature to briefly run the cooling fan at full speed when it first starts.
12 years ago
965baf2683
Merge pull request #362 from daid/Marlin_v1
...
Finnish language
12 years ago
3d91bd486c
Add "kick fan" feature - briefly run fan at full speed on start.
...
Add a feature to run the cooling fan at full speed for a small period
(default 100ms) when first starting the fan. Some fans wont reliably
start spinning at low power, and many fans have issue with the PWM at
low power. However, once the fan starts spinning it can reliably be
set to a wide range of PWM values.
12 years ago
3f2f94ef28
Be consistent in setting of the fan PWM.
...
Always set the FAN PWM value in check_axes_activity() and always use
the value of the active move if a move is active.
12 years ago
7f30039d2a
+ Finnish translation
12 years ago
14e1d495ef
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
12 years ago
bbe7d3d0fe
Fixed #312
12 years ago
7ce509b9a7
Merge pull request #361 from yuroller/MakefileSanguino
...
Makefile sanguino
12 years ago
9c34c4f05b
fixes for ramps compilation using installed arduino ide
12 years ago
442ade15a6
Move Gen6 stuff into a proper location.
12 years ago
5fd4582cc8
Merge pull request #242 from Drakelive/Marlin_v1
...
Fixes issues # 216 and # 135 for Gen6 and Gen6 Deluxe board
12 years ago
8b88e3b386
Fixed #345 , Fixed #267 .
12 years ago
27843388c6
Merge pull request #360 from njprossi/Marlin_v1
...
Power signal control definitions for other power supplies
12 years ago
921273baa0
Added optional feature to stop printing when an endstop is hit. Made the Z display on the LCD in 3.2 format instead of 3.1. Added LCD message when and endstop is hit.
12 years ago
7d20ec706e
Added libraries from Arduino 1.0.3 for sanguino build
12 years ago
437eb3bafc
Initialize PS_ON at startup
12 years ago
f3c1fc70a9
Power signal control definitions for ATX and others
12 years ago
dad7691df9
makefile for sanguino standalone compilation
12 years ago
6752cb2d9c
PID now per extruder. Fixed typo
12 years ago
0ac452e252
Disable is now multi extruder compatible. M84 got a T option.
12 years ago
9e7b5056a0
{X,Y,Z}_{MIN,MAX}_POS are actually in Gcode coordinates.
12 years ago
5f82f03ff3
Add italian MSG_RESUMING.
12 years ago
5e3873c8db
Add german MSG_RESUMING.
12 years ago
01aac2a142
Small changes on the LCD panel, let the speed control work better, line up the parameter edit the same as the menu, remove some unused defines, and remove the Z from the 10mm move menu.
12 years ago
b69cb9fbd9
Change the end of SD cart print message from minutes/seconds to hours/minutes.
12 years ago
30254e3388
Merge pull request #350 from jcrocholl/Marlin_v1
...
Automatically set *_MIN_PIN and *_MAX_PIN according to *_HOME_DIR.
12 years ago
38ee395ac7
Replace the 1ms delay for 2 nops to get a 100ns delay. #259
12 years ago
5df5e4c4a2
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
12 years ago
a95dcd74e7
Fix some of the duplicated PSTRs, saving 500bytes of flash with LCD on.
12 years ago
8caf5d252d
Remove bogus blank line.
12 years ago
1c2ecddae4
Fix typo (# missing before define).
12 years ago
6dfb8a2187
Fix home_all_axis to make QUICK_HOME work with Repetier-Host which sends G28 X0 Y0 Z0 instead of G28. Thanks to Matt Schoenholz for reporting this issue.
12 years ago
3b2e5027e5
Merged updates from Marlin_v1.
12 years ago
b39f5d614a
For boards with only one endstop per axis, automatically set *_MIN_PIN and *_MAX_PIN according to *_HOME_DIR.
12 years ago
ab09fa4bbf
fixed pwm generation at pin D12 and D13 when one of them is used as FAN_PIN on Sanguino, added soft pwm entry for FAN_PIN in temperature.cpp
12 years ago
5697451c72
fix lcd class
12 years ago
58e806f3fa
Fix the russial translation.
12 years ago
50a5ce1dc4
deduplicate messages
12 years ago
6123a00e64
Fix the german translation.
12 years ago
7c21716886
Fixed #341
12 years ago
ae1bc83350
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
12 years ago
596a7e1904
Fix compiling for Arduin < 1.0.0
12 years ago
b264317fa0
Reverted the patch by KevinOConnor, as it crashes some versions of avr-gcc and caused linking issues.
12 years ago
673577a31b
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
12 years ago
23022f1a82
Updates to Makefile to compile for Teensy.
12 years ago
96e9db8919
Merge pull request #339 from KevinOConnor/CompilerFlags
...
Add additional optimization flags to Makefile
12 years ago
08356361ac
Fixing a problem with heated beds not working without PID and BED_LIMIT_SWITCHING
12 years ago
047d037f8c
#ifdef fix for #326
12 years ago
0908458381
Use gcc "-fwhole-program" optimization.
...
Use "whole program" and "link time optimization" features of gcc. The
whole-program optimization enables the compiler to evaluate the entire
firmware for optimization instead of just one code file at a time.
This leads to better overall optimizations.
12 years ago
16fbb455ef
Use linker "--relax" option.
...
The "relax" option enables the linker to convert certain "call"
instructions to the smaller "rcall" instruction. This reduces the
size of the resulting binary.
12 years ago
f30b46b2a8
One more fix for #338 , I really should get a heated bed to test with.
12 years ago
65c3f1ffcd
Most likely fixing #338
12 years ago
7577717b59
Fixed #336
12 years ago
1a8f54cea1
The big LCD code update. This splits the display and menu implementation. Paving the way for future different displays. It also makes it easier to modify the menu structures while keeping everything consistant. Note that this most likely breaks the translations, which need to be updated.
12 years ago
6731c094ee
Fix compiling with just an 16x2 LCD and no buttons.
12 years ago
b99a928a80
Fix the M117 (display message on LCD) when used over USB with checksums.
12 years ago
55ba90ac19
Add PID functional range setting. With high powered heaters the current functional range of 10 degrees causes high overshoots as the PID needs to kick in before the temperature hits 10 degrees below target.
12 years ago
5ff5cee8ce
Fix the sensitive pin definitions, there where analogue numbers in the digital pin list. Also made M42 without a P function on the LED_PIN (which was otherwise a useless pin definition)
12 years ago
8b58edc70e
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
12 years ago
d0319d45af
Merge pull request #335 from jcrocholl/Marlin_v1
...
Fix endstop pins for Printrboard
12 years ago
ca409e5531
Fix X/Y/Z_MIN_PIN for Printrboard.
12 years ago
1f45cb0a51
Fix typo in MANUAL_HOME_POSITION (plural S missing) and improve comments.
12 years ago
931a0052ea
Fix typo in MANUAL_HOME_POSITION (plural S missing) and reduce BLOCK_BUFFER_SIZE because 64 wasn't working for some reason.
12 years ago
46ec4b648c
Added some missing Mxxx comments to M commands. Fixed the unsetting of the timer dividers for the fast PWM fan.
12 years ago
724f5aa36b
Update on makefile for moved Arduino addons.
12 years ago
6d9dfa96c3
Move the Arduino related stuff out of the Marlin tree, as they are not directly related to Marlin functionality but addons for the Arduino IDE. Also split up the addons for pre 1.0.0 Arduino and post 1.0.0 Arduino.
12 years ago
3fb07d9b8d
Add MINTEMP/MAXTEMP error to LCD, and fix temperature bug with more then 1 extruder.
12 years ago
8e2519e88b
Add realtime delta geometry in Marlin_main.cpp.
12 years ago
cec7283b21
Enable QUICK_HOME for deltabot.
12 years ago
2292441f0c
Use X/Y/Z_MAX_PIN instead of X/Y/Z_MIN_PIN for top endstops on deltabot.
12 years ago
c430906d3b
Deltabot settings and configuration adjustments.
12 years ago
82c8724b33
Fix compile with PID_DEBUG
12 years ago
9b160972a1
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
12 years ago
e036750bdf
Use the disable macros on initialization. Which fixes a bug when there is no pin defined for stepper enabled (motherboard 4)
12 years ago
fcd9de72ef
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
12 years ago
32d4373e0f
Add printrboard and brainwave to Makefile.
12 years ago
b3ddbcee2a
Merge pull request #329 from jcrocholl/Marlin_v1
...
Add Printrboard and Brainwave to pins.h and fastio.h
12 years ago
29435dfb4b
Proper avr for Sanguino in Makefile.
12 years ago
52158dffcc
Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.
12 years ago
ca7acbe6d9
Allow specification of which arduino hardware subvariant in Makefile.
12 years ago
33247733e0
Teensylu and Printrboard use different analog pins for thermistors.
12 years ago
621c24a10f
AT90USB is only defined after pins.h is included.
12 years ago
6cba11f087
Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.
12 years ago
4d351b4846
Improved formatting and comments for consistency.
12 years ago
a30007caa4
If fastio.h is not messed up then Teensylu and Printrboard are actually using the same pins.
12 years ago
6aa87a7b67
Use the same fastio.h definition for AT90USB1286/7 and AT90USB646/7.
12 years ago
b1c38d4c82
Avoid compiler warnings (redefined MOTHERBOARD) in Arduino 1.0 and greater.
12 years ago
42e21bb06e
Add support for Printrboard (from https://github.com/lincomatic/Marlin ) and Brainwave (from https://github.com/metrix/Sprinter ).
12 years ago
ce4b5bbeaa
Add AT90USB646 support from Sprinter to fastio.h.
12 years ago
f413aa33b3
Small makefile change, posibility to add defines on the commandline, and fix compiling with watchdog enabled when using the Makefile.
12 years ago
587154c01b
Fix the WATCHPERIOD implementation. It did not work correctly in a multi extruder setup, it did not work after 32 seconds after startup (int16 used as millies timestamp). And it did not work if you gave an M104 or M109 when the target was already around the target setpoint. So on average, it did not work at all. The new implementation should be robust in detecting a failure to heat up.
12 years ago
1f27870d41
Fix compiling the watchdog error message when the manual reset watchdog is used.
12 years ago
c5d4225804
Mistake there, not sure why I did that. My bad.
12 years ago
529748894c
Minor changes in the temperature code for some cleanup.
12 years ago
4e26ecc940
The Partial release message (which does not really tell you anything) overwrites the final print time on the LCD, which is a real shame. So I removed the message.
12 years ago
c421774422
The Partial release message (which does not really tell you anything) overwrites the final print time on the LCD, which is a real shame. So I removed the message.
12 years ago
16078e47d4
Fixed #325
12 years ago
6a9bee27cc
Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.
12 years ago
94ea26ff46
Some minor changes on code style. And a bugfix where the counters for positioning in the stepper where wrong depending on compiler settings. (Caused strange values to reported back with M114 and endstop triggers). Also fixed compiling with FWRETRACT enabled.
12 years ago
6c51fe5039
Fix the bug where the SD percentage calculation is wrong when the file is larger then 42MB
12 years ago
57429cb9fe
Fix for keypad
12 years ago
97fa2a9c30
Few simple fixes that save RAM, as static strings are stored in RAM by default.
12 years ago
c94ca24adc
Fixed #317
12 years ago
99e9554edd
Some fixes in the Makefile to support Arduino 1.0.0 or higher and added the Rambo. Still needs some more work for the different arduino hardware variants.
12 years ago
dbbf050005
More rambo fixes
12 years ago
f934d0ef5b
Merge remote-tracking branch 'tonokip/Marlin_v1' into Marlin_v1
...
Conflicts:
Marlin/Configuration.h
12 years ago
e48dfcc2b3
Tmp copy before merge
12 years ago
b98fb17fe9
Small FREQUENCY_LIMIT changes
12 years ago
bce67ec2c9
Merge pull request #312 from gege2b/Marlin_v1
...
Added french translation
12 years ago
9b1d2483a0
I hope last changes to french translation
12 years ago
b1adc567da
Correction to french translation (non-ASCII chars only)
12 years ago
0807d82af0
Correction to french translation (plain text only)
12 years ago
5cd7a90b32
Added new temperature lookup table creation tool. This one uses stein hart-hart equations.
...
You need 3 temperature resistance:combinations. This gives a better result then using beta.
12 years ago
bb119739b0
Added french translation
12 years ago
df8dd5ac21
Merge pull request #306 from nothinman/Marlin_v1
...
Added automatic build numbering.
12 years ago
2b7b1e52b1
allow marlin internal 0°C represenation
12 years ago
2f771b3979
Added automatic build numbering.
12 years ago
9bebe9b631
Merge pull request #302 from nothinman/Marlin_v1
...
Added Polish translation. Cosmetic changes to English.
12 years ago
a2032afa3a
Fixed #303
12 years ago
6a55ca8370
Added Polish translation. Cosmetic changes to English.
12 years ago
8f20562f49
Fix some of the crowded code style. And fixed the conditional. #300
12 years ago
43018a48c4
Fix for a few -Wextra warnings.
12 years ago
72586eb30a
Solved few warnings.
12 years ago
7a02ba361c
Header multiple include protection should match the filename, not just _ARDUINO_H, which is almost bound to go wrong some day.
12 years ago
f4a89ec776
SDCARDINSERTED is always defined, and thus we do not need the #ifdefs.
12 years ago
57834776ad
Made the 2nd speed lookup table condition more explicit.
12 years ago
caa2b25b40
Fix Gen7 compile if you have avr-libc version 1.7.1 or higher. See http://code.google.com/p/arduino/issues/detail?id=604
12 years ago
a27fef8750
Store the pre-heat constants outside of the ULTIPANEL define, so we can use them when storing EEPROM in a build without the ULTIPANEL.
12 years ago
789be03b4f
Update on makefile, should make it easier to compile for different boards without changing the makefile. (Still missing Arduino 1.x.x support).
12 years ago
40ce057a3e
Fixing issue #297
12 years ago
625ac81acc
Yes, makes sense, lets NOT use the value directly from the configuration define but modify it before setting it. This will not confuse people (including me) at all!
12 years ago
ffc69537aa
Update on some comments, make the MOTHERBOARD list complete again.
12 years ago
71efcfc648
Most likely fixing issue #295 .
12 years ago
04be9d6001
God damn. Sorry, my mistake, forgot to add this file.
12 years ago
c17da4b707
Add ConfigurationStore to the Makefile.
12 years ago
ccd9fd0dc3
Merge pull request #292 from jothan/lcdfix
...
Lcd fixes
12 years ago
46b9988e26
Search and replace failure.
12 years ago
0f73afb0b0
Avoid defining overriding definitions for the RepRapDiscount Smart
...
Controller. Remove common definitions. Harmonize declaration order.
12 years ago
36b452c7ac
Remove abbrs.
12 years ago
332344bd43
Update Marlin/language.h
...
Included Portuguese language
12 years ago
e6c1cadea0
Set the watchdog to a 4 second timeout, as with 1 second it can timeout during SD card init.
12 years ago
faea7d72b8
Merge pull request #290 from buildrob/Marlin_v1
...
Clean up special serial port cases
12 years ago
12a4d60e18
Fix the EEPROM storage, no longer inline it at multiple locations, and remove the template.
12 years ago
9606f4d04f
Include Marlin_main.cpp in source files.
12 years ago
3cbaad9288
RepRapDiscount Smart Controller pin definitions.
12 years ago
99692dc99e
Clean up special serial port cases
...
Assume SERIAL_PORT 0 if not defined. Collapse un-numbered register
special case. Clarify comments.
12 years ago
5a998558a9
Update suggested by Robert F-C. #289
12 years ago
f6ff0ab767
signed/unsigned fixes.
12 years ago
5d471e0f34
Also reset the PID values to defaults. Fixes #281
12 years ago
d3ebc34958
Hopefully also support chips with a single UART in MarlinSerial now.
12 years ago
b6ff45254e
Better explain the watchdog "problem" and rename the config define so it explains that the feature belongs to the watchdog.
12 years ago
7e348fcb5f
By mistake enabled the watchdog by default. This should be off by default.
12 years ago
06b58a9c4f
First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.
12 years ago
539f3b3fe4
Merge pull request #284 from brackendawson/Marlin_v1
...
Use the right pins for Gen7 1.4
12 years ago
65c9a0728f
Set default serial port back to 0.
12 years ago
ab9d183024
Make serial port configurable.
...
This change makes the choice of serial port configurable so that
wireless capability can be easily added by connecting Bluetooth modules
(such as BlueSmirf or JY-MCU) to the expansion port pins.
12 years ago
f5631a89e8
Add dummy Emergancy Pin to Gen7 1.4
...
Change required after pulling from ErikZalm.
12 years ago
a4f9e1ebf2
Merge git://github.com/ErikZalm/Marlin into Marlin_v1
12 years ago
2873d67b17
Put bogus temp override back in Gen7 up to 1.3
...
Took out the ifdef when I split 1.4 out and forgot to permanently
define it for <=1.3.
12 years ago
a7e40b2903
Merge pull request #276 from setar/Marlin_v1
...
Fix num of digits on LCD for E and Z axis.
12 years ago
6ed02c86be
Fixed wrong code (will not even compile when EXTRUDERS>2)
12 years ago
2a67363e27
Fix ‘prog_uchar’ definition in LiquidCrystalRus.cpp
12 years ago
205304ddee
Merge git://github.com/ErikZalm/Marlin into Marlin_v1
12 years ago
58bca87c72
fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '
12 years ago
febeb43197
Revert "fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '"
...
This reverts commit cb02c2f9d8
12 years ago
8178dec4c3
Fix num of digits on LCD for E and Z axis.
...
The number of steps per mm often contains 4 digits before the decimal point and does not require precision greater than 0.1
12 years ago
70f57a6844
Merge pull request #273 from setar/Marlin_v1
...
fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '
12 years ago
ff14199e58
Merge pull request #270 from jothan/Marlin_v1
...
Create an explicit rule for building applet/Marlin.cpp.
12 years ago
695938ba3f
Italian language support
12 years ago
cb02c2f9d8
fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '
12 years ago
e4a5e333ef
Generalize.
12 years ago
e10d3136c8
Create an explicit rule for building applet/Marlin.cpp.
...
It would seem that the pattern matches do not work when the source
file is created when make is running. The result of this is that it is
necessary to run "make" twice to build the firmware.
This adds an explicit rule without a pattern match for building
applet/Marlin.cpp it corrects the make behaviour at the cost of adding
a little redundancy in the Makefile.
12 years ago
9f089756b7
Merge pull request #265 from setar/Marlin_v1
...
Added Russian translation
12 years ago
326423719f
Add support for Megatronics
12 years ago
d07b6e93d5
Add support for Megatronics
12 years ago
efcc28d347
Fix check for include LiquidCrystalRus.h
12 years ago
cfc193cdac
Enables support the Cyrillic alphabet for LCD
12 years ago
24bcc9647d
Added Russian translation
12 years ago
bf7e453d02
Unwanted artifacts from unclean merge of bed-pid tree
12 years ago
36a746d7d5
Merge pull request #244 from markfinn/pidbed
...
PID for heated bed
12 years ago
df09e2adce
Spanish updated
12 years ago
ddf6603d81
Spanish language updated. Bug fixes on dialogs.
12 years ago
4bf8b1aeee
fesfas
12 years ago
be1e099f1b
Union whit Erick version
12 years ago
7afd202b89
New dialogs translated to spanish. Bug fixes.
...
Dialogs from M119 translated, and "Set Preheat" dialogs adapted to the
screen size.
12 years ago
ebc4601185
Some new dialogs translated to Spanish
12 years ago
c8ea9b0e58
Merge branch 'Marlin_v1' of https://github.com/Drakelive/Marlin
12 years ago
ca7ca4572e
primo commit
12 years ago
8016f058bc
fix max endstop pins
12 years ago
d197f8504b
clean up and changes from testing
12 years ago
eb06a886c4
missed
12 years ago
04631d2250
cleanup for pull
12 years ago
0a5ad3ab85
move comment to correct place
12 years ago
8ac5b29e02
Changes to M119 response for easier visual comparison
...
Changed to report on individual lines with "TRIGGERED" or "open" instead of "H" or "L" on one line as H&L could be confused with logic levels High and Low which may be wrong if using inverted logic. Added strings to language.h.
Fixed typo "deu" in English language that was fixed in #134 but got added back in via 9f7f7354f5
12 years ago
c6caa45ae2
Limit Switch locations based on MIN/MAX limits and homing direction
...
fixes #246
Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined.
Relocated code based on feedback.
12 years ago
dc566d654f
fixes #246
...
Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined.
12 years ago
ba898faa7d
Merge pull request #249 from gwelchc/patch-2
...
Slight modification for byte savings
12 years ago
0152ee71a5
Merge pull request #248 from gwelchc/patch-1
...
Binary representation for characters in ultraldc.pde
12 years ago
6ccbfeb80c
Update Marlin/Marlin.pde
...
Added function 'setTargetedHotend' that turns into a function an operation repeated 3 times through the M-codes processing.
This modification saves a few bytes that can be used to add support for new commands.
12 years ago
c433142abf
Update Marlin/ultralcd.pde
...
The joris' char drawins are expressed in binary so to show their content's in a more visual fashion.
This is not a code modification as much as a readibility modification.
12 years ago
1d389ad3a8
Fix M81 not working reliably on Gen7
...
Some discussion of the issue is here http://forums.reprap.org/read.php?181,118329,page=1
12 years ago
9698f4ea64
bed pid
...
Conflicts:
Marlin/Configuration.h
12 years ago
e5c39b7c2a
commit
12 years ago
e8c92e0a95
Missing #else in temperature.cpp prevented reading bed temp when TEMP_BED_PIN <7. Thanks to Leland Wallace for helping me track this down via "Sesame Street" coding (what is not like the other)
12 years ago
bf2071871c
Merge branch 'Marlin_v1' of https://github.com/Drakelive/Marlin
12 years ago
fc32e20881
first commit
12 years ago
abf0693e8e
Added KILL_PIN -1 to gen7 boards
12 years ago
47319cf64e
Fixed typo in SF arc fix code.
12 years ago
e358a2d7af
Added fix for SF Arc Point fillet procedure
13 years ago
044a64a1fb
Merge pull request #225 from Justblair/Marlin_v1
...
Added PDF file containing Menu Tree for documentation purposes.
13 years ago
d728e35658
Update Marlin/pins.h
13 years ago
1c1fddc7ac
Added support for the Rambo reprap electronics board. Added Mcodes to set
...
motor current and microstepping pins.
13 years ago
dcd3e8a211
Tidy up
13 years ago
ddd9d0cfd4
Added PDF file containing Menu Tree for documentation purposes. Source xlsx document included.
13 years ago
0e58ef6805
Some dialogs are corrected
13 years ago
0e89022cc3
Correct temptable_55 name.
13 years ago
47d4f55bc0
Fix Gen7 1.4 pinout
...
Gen7 1.4 uses very different pin assignments, might as well make a new
section and remove some of the conditionals from each. It's easier to change
your pin assingment this way if like me you don't wire it exactly to plan.
13 years ago
6cd150842f
Update Marlin/language.h
...
Some dialogs corrected and Default language set to 1
13 years ago
299c18596f
Update Marlin/language.h
...
Some dialogs are corrected
13 years ago
b86336c3f5
Merge pull request #221 from daid/Marlin_v1
...
Long filename support for LCD display
13 years ago
b69e75c89a
Added long filename support.
13 years ago
1d224cc031
merged with upstream and FIXED AGAIN bad translation commit
...
PLEASE BE MORE CAREFUL WHEN SUBMITTING NEW TRANSLATIONS
When you add new menu items / messages always copy them to ALL
languages (just use english)
13 years ago
06c03fe2f0
new method for message for making KILLED message visible
...
The cli(); at the start of the kill() function also stops the internal
arduino timer which stops updating of millis() which prevents the
display of the "KILLED." message.
The new function updates the display directly without checking any
timers.
13 years ago
87ff61a8a6
Fix for #201
13 years ago
aacbebbebe
Added Menu Options to the Main-> Control->Temperature Submenu that allow the user to set new values for the ABS and PLA preheat function. EEPROM updated so that these settings can also be committed to EEPROM memory.
13 years ago
31873ec707
changed int to long to overcome overflow of number display
...
- related bug reports: Issue #201 , Issue #213
13 years ago
de0448343f
added KILL_PIN support / cleaned up manage_inactivity function definition
13 years ago
69961dbba3
fixed incorrect menu messages from last commit...
...
- removed several multiple definitions of same message
- fixed definition of missing messages in german and spanish
- tweaked german translation (a lot)
- added note about changing and testing this file
13 years ago
6c050b8440
Fixes error introduced at commit aee475aa55 which caused the sketch not to comile for language option 1. Several defines were removed but still referenced in ultralcd.pde
13 years ago
b9f9f8f7d3
The pre-heat ABS and PLA options in the LCD Menu were broken a while back. The pre-heat worked fine, but the cooling fans were not switching on as intended. This is now fixed.
13 years ago
d38b96fff1
Update Marlin/language.h
13 years ago
9f7f7354f5
Set default language 1
13 years ago
aee475aa55
Update Marlin/language.h
...
Spanish language included. It features the LCD screen messages and a small part of the Serial messages.
13 years ago
9083966c22
Do not use feedrate multiiply on Z and E only moves.
13 years ago
5406c533db
Disable FAST_PWM by default. On some systems it does not work ok.
13 years ago
f92dc91c3d
Enable M503 also when eeprom is disabled
13 years ago
35a1dd081f
no message
13 years ago
5131ab19ca
Fixed Retract in LCD Menu
13 years ago
96f4f90cb3
Added pause and retract lcd menu items
13 years ago
e10355500d
Updated Language.h with pause, resume, and retract
13 years ago
a97c006bbf
Merge pull request #195 from kobaan/Marlin_v1
...
Updated german translations in language.h
13 years ago
f062794a0d
Merge pull request #208 from Enchiridion/Marlin_v1
...
Added support for dual Z axis stepper drivers
13 years ago
57468d3c21
Merge pull request #210 from Dabble63/Marlin_v1
...
Add Duty Cycling to the Heater Bed
13 years ago
6b45e9f167
Add Duty Cycling to the Heater Bed
13 years ago
adee81170d
M206: save values in eeprom
...
Really, we should have a way to adjust the XYZ homing of a machine in
the eeprom. So as the second stage of this, make the M206 home offset
parameters subject to the M500/M501/M502/M503 eeprom commands.
Bump the eeprom version to "V06".
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
13 years ago
1dba212e18
HOMEAXIS: make into a function
...
Replace the large macro HOMEAXIS with a function. This avoids the
compiler generating three copies of largely identical code. The
saving is 724 bytes of program memory.
We make use of XYZ_CONSTS_FROM_CONFIG to provide convenient
array-shaped access to MAX_LENGTH, HOME_RETRACT_MM and HOME_DIR.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
13 years ago
7bb326d389
eeprom: provide smaller code for SERIAL_ECHOPAIR
...
SERIAL_ECHOPAIR implies, eventually, two calls to MYSERIAL.print. One
of these has FORCE_INLINE for a per-character loop, and both involve
constructing a method call rather than a simple function call.
Produce better and smaller code by providing three specialised
functions serial_echopair. This saves 672 bytes of program memory
(with EEPROM_SETTINGS and SDSUPPORT enabled).
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
13 years ago
957e966d2d
M206: always use homing ("homeing") offsets
...
Previously the parameters set in M206 would only be used if a G82
command was sent with specific axis home values. This limits its
usefulness.
Really, we should have a way to adjust the XYZ homing of a machine in
the eeprom. So as the first stage of this, make M206 affect every
home command. The values set using M206 are now added to the
configuration variables [XYZ]_HOME_POS.
This is achieved by replacing all uses of [XYZ]_HOME_POS in the code
by a new home_pos[] which includes the adjustment. We also have to
adjust the uses of [XYZ]_{MIN,MAX}_POS similarly - see below.
To allow axis_is_at_home to be written as a function taking an axis
index rather than a macro taking an axis letter, we provide
constant arrays in program memory containing the values of
[XYZ]_{MIN,MAX,HOME}_POS from the compiled-in configuration.
This is done with some helper macros to deal with the declaration
(XYZ_CONSTS_FROM_CONFIG) and definition of the inline function which
does the program memory access.
We also introduce the overloaded function read_pgm_any, whose
instances are produced with DEFINE_PGM_READ_ANY, which allows the
access functions to automatically produce the correct type.
The type- and pointer-massaging code in the access function boils
down, when compiled, to a simple program memory access.
A question arises: if the M206 offset is set, should this adjustment
to the home position shift or change the possible range of movement
permitted by the software endstops ?
The documentation in Configuration.h describes these limits as:
// Travel limits after homing
Since this is a file containing physical limits, and actual suggested
values for these configuration parameters appear to include a certain
amount of slop, I've taken the view that these should be regarded as
nominal physical distances from the limit switches, and that the
permissible travel should be unaffected by M206.
So for example with the (rather unrealistic)
#define X_HOME_DIR -1
#define X_MIN_POS -20
#define X_HOME_POS 0
#define X_MAX_POS 100
no matter the setting of M206 X, the machine would be permitted
to move from 20mm "beyond" the limit switch trigger point in
the negative X direction and 100mm away from the limit switch in
the positive X direction, for a total travel of 120mm.
With M206 X-10 that would be considered to correspond to X coordinates
-30 to +90. With M206 X+10 that would be considered to correspond to
X coordinates -10 to +110.
fixes #200 (in ErikZalm/Marlin).
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
13 years ago
faccb35850
software_endstops: use *_MIN_POS and *_MAX_POS for arcs
...
If [XYZ]_HOME_POS and [XYZ]_MIN_POS aren't 0, these corrections are
wrong. Use the same logic as in Marlin.pde:prepare_move: ie, clamp to
[XYZ]_{MIN,MAX}_POS.
While we're here, put this cut-and-paste code in a function
clamp_to_software_endstops.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
13 years ago
3f15b7c7b8
Makefile: Better display of size (device memory usage)
...
Run avr-size with the --mcu=... -C option as well. That reports how
much actual device program and data memory is used along with a
percentage fullness.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
13 years ago
0c35facc94
Makefile: support V=1
...
Often it can be useful to see the actual commands being run by make.
Other projects (eg, the Linux kernel) support this with a "V=1" make
parameter. Do the same here.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
13 years ago
71404eef29
.gitignore: Add *~, *.orig, *.rej, move to root directory
...
Move the .gitignore out of the Marlin subdirectory so it applies to
the whole tree, and add some missing patterns.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
13 years ago
a873541ef6
Marlin.pde: include comment for emacs mode
...
Emacs by default doesn't recognise a ".pde" file as C++ source code.
Add the annotation to the top of the file to make it work.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
13 years ago
50cde90324
Added support for dual Z axis stepper drivers
13 years ago
603a5e25b3
Updated german translations in language.h and eliminated a few double lines.
13 years ago
538189cc19
Fixed soft limits when the origin is in the middle.
...
HOME_POS is now always where the endstop is and can be outside the limits.
The limits are now defined by MIN_POS and MAX_POS rather than HOME_POS and MAX_LENGTH.
The Z is axis now homed first if direction is away from the bed.
Saguinololu limit pins change from MIN to MAX according to the homing direction.
13 years ago
686011a548
Fixed typo
13 years ago
cd57bf305b
Merge git://github.com/daid/Marlin into Marlin_v1
...
Added invert step pins to corexy code
13 years ago
ea2c19f978
Added CoreXY support (Thanks Ilan Moyer)
13 years ago
aa65fe22ed
decoupled axes sucessfully at least on pure x or y jog
13 years ago
12de8fff81
Support step motor controllers with active low step pins.
13 years ago
b67dacdc8f
Fixed AD595 define
13 years ago
d3002ef741
corrected retract
13 years ago
0c123950e9
__ header file replace
13 years ago
bf077125b9
added firmware retract. disabled by default
13 years ago
0e5e249ab5
added individual pullup setting option to have finer control in case there is a special z-min sensor, for example
13 years ago
6b14f95b3e
Merge pull request #170 from linagee/Marlin_v1
...
Marlin v1
13 years ago
c7ce99d495
Merge pull request #172 from daid/Marlin_v1
...
Add M401 - Wait for user to press button on LCD (with optional timeout) minor fix in M115.
13 years ago
b7fc14bc65
repaired thermistortable_6 by graphcial fitting of the off-slope values. see issue 179. Erik, I know you asked for no changes, but this file probably is not related and hopefully allright.
13 years ago
9e1021efbe
Fixed SL bug.
13 years ago
e9bec9b6fe
Fixed E1_ENABLE pin for Ultimaker. This was wrong for the 1.5.4 and 1.5.3 PCB (I cannot check the 1.5.6)
13 years ago
fbd282b3ba
Update Marlin/Configuration.h
13 years ago
2e8c5049c5
Update Marlin/thermistortables.h
13 years ago
2d0d8e5272
Small correction.
13 years ago
4d7fe7115f
Changed M401 to M0/M1 as suggested, so they match normal CNC stop commands.
13 years ago
9e9db65c3f
Update Marlin/thermistortables.h
13 years ago
bd966ef389
Update Marlin/thermistortables.h
13 years ago
775da3f103
Added top ratings and extended to ADC=1 for table 3 and 5.
13 years ago
96a4baa0be
Update Marlin/thermistortables.h
13 years ago
2aa9f7b131
Update Marlin/thermistortables.h
13 years ago
c4490f5f3d
Update Marlin/Configuration.h
13 years ago
dd9144994e
Tested May 19 - It works! Verified with separate thermocouple TM-902C also.
13 years ago
4c37d0d9f1
Extended range above 250C. (Operating range states up to 300C)
13 years ago
b59724e42b
Add strigification for extruder amount in M115 report.
13 years ago
16413bb8f2
Last M401 update, refresh the LCD during an M401 wait.
13 years ago
b3941fce5c
Update after testing
13 years ago
d494688565
Do not initialize in the header file.
13 years ago
516ec90242
Add M401 - Wait for user on LCD button press
13 years ago
7244aa7eb7
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
13 years ago
de2ca3b2e8
Grammar correction.
13 years ago
c2fc466e1b
Update Marlin/Configuration.h
13 years ago
241f5a4c0e
Update Marlin/thermistortables.h
13 years ago
9f9f498491
Update Marlin/Configuration.h
13 years ago
e31bef31ad
Limit PID autotune PWM to PID_MAX
13 years ago
b2a9ccdb97
Merge pull request #159 from MaikStohn/Marlin_v1
...
Marlin v1 - BUG FIXES / CORRECTIONS
13 years ago
d459fb41b7
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
13 years ago
804e0d6117
Merge pull request #164 from guanix/Marlin_v1
...
Melzi support
13 years ago
ba96059203
add additional dropsegments test
13 years ago
fbd91ab0b5
Fixes #153 for bad call to abs()
13 years ago
b51c06e2b3
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
13 years ago
159ae90874
bug fix for scrolling of main menu when using SMALL_DISPLAY (2 lines only)
13 years ago
e48f5aa6a7
fixed typo
13 years ago
1efe9ab497
changed encoder pos from int to long to fix problems setting x/y/z/e stepps_per_mm using the lcd menu
13 years ago
602c8ee02b
Melzi support
13 years ago
279d00da9f
Fixed #if for Ultimaker.
13 years ago
451f9cc6d1
Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer.
13 years ago
e3fe1f0d00
Made a more granular configuration possible PREVENT_LENGTHY_EXTRUDE. You can now decide to allow/disallow large length of extrusions to be executed.
...
Turning off the protection might be beneficial to those who want to do fast and long reversals.
13 years ago
d88205d89d
Suggestion to improve (TODO), no actual code changed
13 years ago
5aa80e6c05
Made language.h more flexible. Automatically do the right defines based on MOTHERBOARD == 7 ? "Ultimaker" : "Mendel"
13 years ago
b657a18449
Revert "magic PROGMEM defines to avoid hundreds of wrong GCC warnings"
...
This reverts commit 3682d9bd5b
13 years ago
d188ae4c9d
added missing declaration of buttons_init()
...
This is required when moving the buttons_init() function to the
lcd_init() function
13 years ago
3682d9bd5b
magic PROGMEM defines to avoid hundreds of wrong GCC warnings
13 years ago
032df0b2c6
Moved LCD initialization out of constructor
...
Since the class "MainMenu" was used within a static variable the
initialization of the object (constructor call) was done before Arduino
library startup. It always caused a crash when using AVRStudio with
JTAG debugger (caused from calling the LCD initialization / the lot of
I/O work / the stack used during this calls). By moving the LCD_INIT
out of the constructor and using an explicit call inside of Arduino
setup() implementation immediately fixed all problems and the JTAG
debugger runs fine.
13 years ago
bd1ad7c76a
explicit includes to make it compile with AVRStudio/Eclipse
13 years ago
060b38de5c
delete obsolete and wrong code
...
"i" runs from 0 to 4 but "add_homeing" array size is 3 only. On the
other hand the calculated value gets overwritten by either one of the
if choice.
13 years ago
789ba02d43
fixed typo in comment
13 years ago
1874cb71a6
Added option to increase the FAN PWM frequency.
13 years ago
6a5a34e0ff
Small cleanup
13 years ago
e3821bd86f
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
13 years ago
02af69911e
Added temperature window to M109. This is needed for systems with no overshoot PID.
13 years ago
e203b8c754
Merge pull request #154 from daid/Marlin_v1
...
Added 2nd extruder temperature LCD readout and setting.
13 years ago
362ddc4efc
Merge pull request #155 from Atntias/patch-1
...
adding M120 and 121 for turning on and off the endstops only for homing
13 years ago
c27081aa4a
Fix to allow M120/M121
13 years ago
e11e072eca
adding M120 and 121 for turning on and off the endstops only for homing function
13 years ago
8e68c6cf89
Show proper temperature for extruder 2
13 years ago
8503b78876
Added support for 2nd extruder temperature to UltraLCD
13 years ago
3eacb4c16d
Wrap the call to turn off the bed heater in a #if to prevent a compile error on boards that do not have a bed heater
13 years ago
e4d2138dbd
reinitialize the lcd, if the SD card is inserted or removed. It seems that LCDs can confused by electrical discharges from time to time.
...
Since a removal or insert of the sd card takes a long time in firmware, just reinitializing the lcd does not hurt.
actually, it solves a problem with the UltiControlle
13 years ago
464b755918
added support for the UltiController
13 years ago
44fd8d46d2
fixed quickhome
13 years ago
33bb044d7c
fixed catsting to (int)e in serial error messages.
...
see https://github.com/ErikZalm/Marlin/issues/148
13 years ago
c2557abc03
Merge pull request #138 from triffid/fix-makefile
...
make should rebuild if configuration or Makefile is changed
13 years ago
67cf105bc6
Fixed AUTOTEMP (M109 S215 B260 F1 starts autotemp)
...
Changed SLOWDOWN. IF this does not work ok OLD_SLOWDOWN is the old algo.
13 years ago
8aee9d51b6
Disabled disable_heater in PID_autotune.
13 years ago
414408b2d0
Fix for wrong systax in #ifdef.
13 years ago
77d503fa13
Fix Makefile
13 years ago
cf7c8c458f
Fixed MAX6675
13 years ago
03b0850e63
This breaks temperature readout for pronterface!
13 years ago
ad8bc71d3e
- Fixed a typo
13 years ago
46feae79c6
Fixed typo in arc
13 years ago
4ca2f336f0
Changed default MINIMUM_PLANNER_SPEED -> 0.05
...
Fixed small bug in arcs
M105 prints now actual_temp/target_temp
13 years ago
ae0bf8068b
Fixed arc offset.
13 years ago
0c1b863755
Ignore ":" in comments.
13 years ago
63aec3c56e
Replaced Kill by Stop. If the printer is stopped. Fix the error and use M999 to restart.
...
Moved the PID_dT in the Ki and Kd calculation from the configuration.h to temperature.cpp
13 years ago
8b785f75a6
Merge pull request #123 from buserror-uk/for-upstream
...
For upstream
13 years ago
520f1a54a8
Fix compilation error when PIDTEMP is undefined and ULTIPANEL is defined.
13 years ago
5550e893d5
New board variant, Open Motion Controller
...
Open Hardware board currently used by the group build of http://tvrrug.org.uk
The board can be found at http://solderpad.com/folknology/open-motion-controller/
Signed-off-by: Michel Pollet <buserror@gmail.com>
13 years ago
aa6e6e914e
Makefile: Redone
...
+ Removed most explicit pathnames, use the standard make "VPATH" to let
make find the files for itself.
+ Added a "hardware variant" variable that allows compiging Sanguino and
Gen7 as well as "generic" arduino.
+ Allows overriding the MOTHERBOARD define from the Makefile
+ Removed the 'preprocessor' bit that wasn't needed, now just "include" the
files that are needed, since it allows gcc to show the right file/line
when displaying error/warnings.
+ Uses gcc's own dependency generator to generate the .d files, and
and include these instead of self-patching the makefile
Signed-off-by: Michel Pollet <buserror@gmail.com>
13 years ago
0183e6332a
made prepare->autostart independent of current folder.
13 years ago
1532200435
found error in filenames.
...
One array was too short. This had nothing to do with long filenames, other than if they were 12 characters exactly, which could only happen if the extension and the text before were filled completely
13 years ago
b985e4a134
Fixed compile errors in ultralcd when no ultra_lcd is selected.
13 years ago
2e749d60c3
Added DISABLE_MAX_ENDSTOPS
13 years ago
33f5697888
PPID tune exports more constants.
13 years ago
b44055cc51
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
13 years ago
f5eae52098
Added more manage_inactivity checks
13 years ago
19a47dae4a
Merge pull request #99 from Justblair/master
...
Better pin configuration for rotary encoder in RAMPS boards
13 years ago
910f4e77a2
Added 20MHz support.
13 years ago
7cefad3744
Merge pull request #106 from bgamari/Marlin_v1
...
Make F_CPU dependence of stepper.cpp more explicit
13 years ago
87ff2f8867
Added CONTROLLERFAN. (Controlling a fan to cool down the steppper drivers)
13 years ago
387fe51a56
Do not disable steppers when there are moves in the queue.
13 years ago
421264e58a
Fixed typo
13 years ago
15ad923310
Removed !!!. Stupid arduino bootloader can't handle this.
13 years ago
61e09e6be2
Added FAN_PIN -1 checks
13 years ago
87c4e06c24
Corrected active_extruder when autotemp is used.
13 years ago
7b1e295f34
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
13 years ago
c077316b2b
Added PID autotune. (experimental)
...
M303 Starts autotune. Wait till the Kp Ki and Kd constants are printed.
Put these values in Configuration.h
13 years ago
49b228c4b3
Add instructions to regenerate speed_lookuptable when changing F_CPU
13 years ago
96509494f0
stepper: Clarify comment on timer-counter configuration
13 years ago
6d7e6a11fc
Add create_speed_lookup
13 years ago
ce07c9186d
While Waiting for hotbed to warm up via M190, LCD Display and Click Encoder input freeze until target temperature is reached.
13 years ago
116dc86b8a
Fixed type in e-jerk
13 years ago
02ee9e3d30
Changed Pin Assignment for the RAMPS motherboard so that LCD and Rotary encoder are all wired to AUX-4
...
This simplifies wiring for those with RAMPS 1.3 and 1.4 boards.
13 years ago
e056bf8081
Added E-Jerk
13 years ago
4deeffbc88
Added missing defines to the german section.
...
Translation still needed.
13 years ago
632528aa95
merging with SCUBA82
13 years ago
aac7aa3bf0
Queued fan control. Issue #90
13 years ago
fde51084f3
set SD file delete to M30; switch printime output to M31
13 years ago
21e2bae063
Changed (corrected?) SD_card comment handling.
13 years ago
e509bbf636
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
13 years ago
072011a3ef
Added current_block = NULL to quickStop()
13 years ago
2422a857a1
Merge pull request #96 from haxar/Marlin_v1
...
make analog2tempBed return a precise celsius reading for BED_USES_THERMISTOR, ...
13 years ago
f598077af3
Removed vc files
13 years ago
cb0c84e075
Merge remote-tracking branch 'justblair/master' into Marlin_v1
13 years ago
1d5809d458
Merge pull request #88 from daid/Marlin_v1
...
Made plan_buffer_line arguments const...
13 years ago
ed951b1977
Fixed RAMPS 1.2 support (Found and fixed by rrhb)
13 years ago
4879de08e8
The percent complete for the SD file statistic sits squint. Changed "lcd.Setcursor (7,2);" to "lcd.Setcursor (10,2);".
...
The percent complete now lines up with the temperatures and Z-axis position figures, nicer to read and nicer to look at IMHO.
13 years ago
f278e1c00f
This is in my opinion a much better way of dealing with SD cards than my previous fix.
...
Instead of adding a momentary switch to fake the insertion of the card I have modified the ultralcd menu item:
Card Menu -> Refresh
to reinitialise the card providing that the SDCARDDETECT pin has been set to -1 in the pins.h file. This requires one less switch on the front panel and the refresh menu item is in the most relevent place for a user who wishes to inert a card and then print from it.
It also means that the "Card inserted" messages do not bother the users of these card readers (they dont make sense for users without SCCARDDETECT)
13 years ago
046a8e0039
Added more defines to the language.h file so that nowe most of the text strings are now configured via this file. Still got some hunting down to do to complete this task.
13 years ago
79a466ca26
make analog2tempBed return a precise celsius reading for BED_USES_THERMISTOR, complementing changes to analog2temp in d15f01e
13 years ago
5f3a422e68
added M31 - delete file from sd card
13 years ago
fa2e3a40e9
fixed LCD manual z axis move Feedrate to 70 (was 1700)
13 years ago
a92b3afe64
added german translation;Menue should be in english.. sounds better
13 years ago
9fa586bbed
fixed languages; Preheat_PLA and Preheat_ABS was not defined for non
...
english
13 years ago
00d33e6b82
Typo fix
13 years ago
7d124478fa
Only protect the heater pins for the defined extruders.
...
Changed the way the extruder pins are defined so it doesn't create extra -1 entries in the list.
13 years ago
3d83109028
Fixed general 16x2 LCD build without SD support.
13 years ago
cb02914687
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
13 years ago
10bf2bb8e1
-
13 years ago
d47b666630
Merge branch 'Marlin_v1' of git://github.com/ErikZalm/Marlin into Marlin_v1
13 years ago
88d289caa1
Made plan_buffer_line arguments const, which optimizes better and fixes the RUNOUT_PREVENTION feature.
13 years ago
b4833d55c2
Fixed HOME_POS in combination with G28 X0 or G28 Y0
13 years ago
c6f2ec3c82
remove stop_heating_wait
13 years ago
b48d67ce10
Fixed homing
13 years ago
071eec7aa7
Merge pull request #81 from phord/09469add5560ca8a676c42e4bcd499868c33f0dd
...
Clean up and add some trace info
13 years ago
1ebe7d1ab6
Merge pull request #83 from phord/tempfix
...
Add explicit #define for bogus temp override
13 years ago
b65ef8d66c
Add support for upcoming Gen7 v1.4
...
V1.4 moves thermistor power to the always-on 5v line.
The BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE is no longer
needed on this board. Add a new motherboard type to
support this feature.
13 years ago
740f0c7690
Add explicit #define for bogus temp override
...
The code to ignore the "bad thermistor reading failsafe"
suicide function depends on the existing of the PS_ON pin
feature. But in some boards this shouldn't be the case
Fix this by adding an explicit definition to make our
intentions more clear and separable.
13 years ago
ba8500a236
pins.h: Define Z_MAX_PIN for Gen7 board
...
The Z_MAX_PIN value was defined as no-value, but this causes
the compile to fail. Fix this by setting the Z_MAX_PIN to the
correct value (which happens to be 0 for pin PB0/DIO0/0).
13 years ago
09469add55
Add board reset reporting (from Repetier-Firmware)
13 years ago
f3101e96d9
Add suitable .gitignore to avoid build noise
13 years ago
245dca4bee
Makefile: generic pde=>cpp rule
...
This adds flexibility to the makefile by allowing different pde
targets to be specified for different needs.
13 years ago
97d42ca2b2
SDSUPPORT default disabled
13 years ago
7b14953c99
Fix build on Sanguino based boards with ATmega1284P
13 years ago
286d5003fa
Fixed compiler warning for Sanguino compile
13 years ago
66d50562b6
Merge pull request #76 from iXce/Marlin_v1
...
Fix Makefile
13 years ago
27f595a444
Changed version => RC2
13 years ago
018c567abf
Moved SLOWDOWN function. (jetty840)
...
Included AD595 calibration options. (daid)
13 years ago
4fbda5c3f5
Merge remote-tracking branch 'daid/Marlin_v1' into Test
13 years ago
ce714fe306
Fixes in pins.h
13 years ago
35e57bf149
Added gen6 deluxe.
13 years ago
84ea2d61e8
Moved gen7 boards to motherboard type 10, 11 and 12.
...
Split ramps1.3 in Sprinter like config and multiextruder config.
13 years ago
adc108d79e
Correctly build the produced applet/Marlin.cpp source
13 years ago
5aa9c41ab1
Changed comment mode for detection.
...
Added M221 extuder multiply factor.
13 years ago
00690f7ffd
Fix cast warning in Gen7
13 years ago
01d28c18ab
Fixed casting warning in sanguino
13 years ago
2fd8c248fe
Added Fan control to the pre-heat settings.
...
I find that the PID routine works better when the cooling fan is switched on
at the beginning of a warm up routine. Otherwise when you enable the fan
just before a print, you have a delay as the PIDre-adjusts.
This should also be safer as most cooling fans are directed at the hot -ends
thermal barrier!
13 years ago
d9f2f509d5
Added new menu items under the prepare submenu.
...
Instead of a single pre-heat, now there is pre-heat ABS and PLA options
Added defines to the configuration file to adjust preheat temperatures for both
13 years ago
ae3e7586c6
Added HOME_POS. This adds the posibility to make the center 0
...
Updated the Xsteps ... settings via the LCD menu
13 years ago
df1437bd86
Changed display format for some numbers.
13 years ago
8816ef1c64
Small fixes after merge
13 years ago
d298dd121f
merged SBUBA82 and Justblair
13 years ago
2cc9a89830
Merge remote-tracking branch 'SCUBA82/Marlin_v1' into Marlin_v1
13 years ago
a0a1f81913
various changes
13 years ago
8a8ea50f33
fixed manual axis movement lcd option
13 years ago
b976692d0f
Removed VS project files for tidyness stakes
13 years ago
fe940a142d
Added a structure that will allow easy translations/modifications to the LCD menu.
...
Signed-off-by: Blair Thompson <mail@justblair.co.uk>
13 years ago
b3fb09a20c
change preheat to ABS values of nozzle 227 and be 105 C
...
next try for manual axis movement
13 years ago
a05a261b72
Added a workaround. Ramps SD card does not have sdcarddetect. My temporary solution is to add a momentary swtich
...
that pulls down the SDCARDDETECT pin and mimicking the pull and reinsert ofa a SD card
13 years ago
1b6765ed12
Updated the pin config for RAMPS 1.3 to include ultimaker new style LCD/Rotary Encoder interface
13 years ago
1ff99ae25f
ATMega1284P support for Arduino IDE
...
replace $ARDUINO_HOME/hardware/tools/avr/etc/arduino.conf with this file
13 years ago
e661578c84
support for GEN7 1.1,1.2 and 1.3
13 years ago
73344e69c1
Added temperature offset/gain settings for AD595.
13 years ago
d309565b56
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
...
Conflicts:
Marlin/Configuration.h
13 years ago
0e3631ff4b
smaller changes
13 years ago
fa2e1be0ca
changed default EXTRUDE_MINTEMP to 170.
13 years ago
7699f250e3
Fixed small merge bug
13 years ago
11518a987f
merged with triffid fork
13 years ago
13e185d330
removed unused HEATING_EARLY_FINISH_DEG_OFFSET
...
Simplified stepper inactive time
13 years ago
b58eae7657
Corrected e-length calculation in planner
13 years ago
2a77c84c8f
Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.
13 years ago
d47a3e5950
Changed check i mtion_conrol
...
if (millimeters_of_travel == 0.0) => if (millimeters_of_travel < 0.001)
(thanks mooselake)
13 years ago
f87c80889f
Fixed M109 timer overflow (reported by triffid)
13 years ago
154de69c02
Print configuration.h version during startup (thanks hairykiwi)
13 years ago
6ef8459494
Corrected distance calculation. (thanks jv4779)
13 years ago
598eb1d4f1
Fixed compilation for gcc-4.6.2 with avr-lib-1.8.0 (thanks daid)
13 years ago
9173a5713b
Teensylu support.
13 years ago
da040fd393
Fixed ultimaker heater 1 pins. (Thanks daid)
13 years ago
bdb70c0509
Warning for 10k thermistor
13 years ago
5113513cb2
RC 1
13 years ago
d8a0c6450f
Split the configuration file in two parts.
...
One for common settings.
One for advanced settings.
13 years ago
4cc8e37bf1
lcd menue "move_axis" added
13 years ago
b5fae1104b
fixed sUICIDE_PIN disable
13 years ago
f9c5333f97
Made "stop heating wait" optional.
...
Default off.
13 years ago
292ddd2edb
Fix Z_LATE_ENABLE
13 years ago
25cd8af536
added arduino ide GEN7 support Files
13 years ago
14702089ee
-disable TEMP Min MAX Kill while using PS_ON Pin
...
ON GEN7 there is no temperature reading when power is off.. so Marlin
would kill itself. There seems to be an update from "Traumflug" on GEN7
using standby VCC for thermistors.
13 years ago
b51e8bf7e5
-disabled CARDDETECT if PIN is set to -1
...
- redo disable Beeper if PIN is set to -1
13 years ago
3183a14755
-added Configuration for GEN7 which worked for me
13 years ago
5edef148fe
-disalbe beeper if BEEPER_PIN = -1
13 years ago
13e2ad2831
- added info for using GEN7 configuration
13 years ago
59cc5f889e
- added support for ATMega1284P
13 years ago
a11f3b2d2f
- Pins for modified GEN7 assigned
...
- Added support for ATMega1284
13 years ago
abb7e63906
fixed z-disable bug.
13 years ago
9f139d6e0e
Added MAX6675 support. (Thanks to gregfrost)
...
Needs some work to remove the blocking in read max6675.
13 years ago
e45e5c68bb
Added support for Gen3+ (Pins file only)
...
Added late z enable. (blddk request)
Only calculate look ahead if >2 moves in buffer.
Removed some FORCE_INLINE to save memory.
Signed-off-by: Erik van der Zalm <erik@vdzalm.eu>
13 years ago
9c918a497b
more work on Makefile - actually rebuilds if Makefile or Configuration.h are altered, also much cleaner output
13 years ago
ab01658fd2
local configuration stuff- WATCHPERIOD causes breakage, disable. few other misc changes
13 years ago
42bedb3f60
PROGMEM elements must be const
13 years ago
a991bde523
enable auto-reset before programming, disable afterwards
13 years ago
3e575533c5
get M81 working
13 years ago
2ae2ead97b
help residency not overflow
13 years ago
71dc82e0b4
my local configuration
13 years ago
5aadc2f5ca
cardreader needs to include some other files
13 years ago
8d0916af13
allow Marlin to actually compile with Makefile pulled from Sprinter and a few other modifications
13 years ago
6cc6029d7a
M109 EOL fix when TEMP_RESIDENCY_TIME is undefined; printer interface (pronterface) could not see target extruder heater temperature to continue print
13 years ago
157aa7f2fd
m115 eol fix
13 years ago
7aeb45303d
small mistake
13 years ago
cee5f9020a
added suicide pin for a power supply to the arduino that is only active if the arduino is holding high for an output.
13 years ago
3814bbb529
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
13 years ago
729cde4475
fix autostart failure if in wrong directory
13 years ago
396270a0de
fix duplicated definition of MOSI MISO pins in case motherboard==33
13 years ago
11f2dafc4e
one step closer to a functional makefile..
13 years ago
8463e39a4a
starting with sanguino arduino 1.0 compatibility
13 years ago
2bc160a978
add wiring.h, that can be used to overwrite:
...
arduino-0023/hardware/arduino/cores/arduino/wiring.h
this is necessary if the avr libraries are recent, but arduino is old. Alternative: newer arduino
13 years ago
57f9359a41
simplified the includes, makefile now works with arduino23
13 years ago
3c1a4aac2b
header file simplification
13 years ago
212515148e
added m240 photography support. default off
13 years ago
6735025428
cooldown
13 years ago
415aadf704
lcd panel bed support
...
advance and ultipanel not any more in default config
13 years ago
554cc1718d
Fiexed E_ENABLE_PIN errors
13 years ago
617968ab76
G92 fix
13 years ago
84d9cf7339
merging
13 years ago
e017228569
Merged multiple extruder support.
...
Soft PWM. (Sanguinololu can also have PID temperature control)
Interrupt save WRITE for addresses > 0x0FF
13 years ago
3320a5b37d
make autotemp compatile for use without pid
13 years ago
06411d5c9e
ultralcd can now also stop the wait loop for the hot-end m109 heating when stopping sd prints.
13 years ago
82c99625fa
instant stop of sd prints from the panel.
13 years ago
01001b89d2
repaired nozzle runout prevention to not collide with automatic stepper disabeling.
13 years ago
88ee053af0
heating up santity, formarly knows as "watchdog", but renamed due to the existance of the real watchdog, works now.
13 years ago
b1d84d879b
st_synchronize back to normal..
13 years ago
f6fe7143e4
Merge pull request #29 from k-eex/Marlin_v1
...
Fix M201 not saving settings in all places, so the changes did not get written into EEPROM
13 years ago
dde4b40fa9
disable steppers in runout prevention
13 years ago
2bc5e7ec9e
prevent too long extrudes, or too cold extrudes
13 years ago
aa4f9a6474
better values.
13 years ago
87fd249c43
made runout prevention independent of tempeorarily set esteps
13 years ago
1ec0c3b68a
extruder runout prevention.
13 years ago
5b4625f79c
added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing.
13 years ago
cc4a9cdb69
added autostart procedure trigger to the ultralcd menu
13 years ago
61c943b4bf
fixed the st_synchronize. it would have continued if there is only the last move of the buffer being stepped.
13 years ago
bae1e422f6
Fix M201 not saving settings in all places, so the changes did not get written into EEPROM
13 years ago
754d2d69b2
z homing sound fix, for now until the actual cause is found..
13 years ago
986f0ba76c
moved <stdio.h> to more dominant location.
13 years ago
460b788d78
repaired homing position setting.
13 years ago
4fd75dc813
Working version of multiple extruders (up to 3)
...
- The temperature control is pretty much complete
(not sure what to do w/ autotemp though)
Changed the pins assignment to clearly separate bed and extruder heaters
and temp sensors, changed a bit how termistor tables are handled.
- The steppers control is rudimentary
(only chanages what pins it uses depending on the active_extruder var,
but that's enough for switching extruder in the start.gcode in the
the profiles)
- Tested only w/ RAMPS 1.4
13 years ago
12e8edcac3
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
13 years ago
cf50ba140f
added M503 to display eeprom storage, and renamed eeprom routings. This version is compatible with the qtmarlin eeprom-tab.
13 years ago
89e832c295
Update endstops only for homing. (use less resources when not used)
13 years ago
b99c49ec3b
Add option to only check endstop when homing
13 years ago
95a0b28acb
Merge branch 'Marlin_v1', remote-tracking branch 'origin/Marlin_v1' into Marlin_v1
13 years ago
af22e9cd38
Some advance modifications
13 years ago
7714b98da7
solved some compiler warnings that are now visible in arduino 1.0.
...
Found a couple of unused variables, that I commented.
Tried to solve the program memory warning message, and failed.
13 years ago
dfd240b260
overworked autotemp, removed one layer of nesting from the ultralcd.
13 years ago
4f909963e4
make QUICKHOME configureable
13 years ago
6b86f15686
More 2nd extruder implementation. (Not usable)
...
Advance (not tested)
13 years ago
0bc9daa4f7
make it compile with arduino 1.0 ; function is still untested.
13 years ago
b0c3871750
more fixing of the sanguino math round problem
13 years ago
9c57453168
removed stream.h referenece from marlinserial.
13 years ago
59205ac5fc
preliminiary implementation for the early heating finish.
...
Might be replaced by something more clever, e.g. by erik, and does not yet support the second extruder or the bed.
its kind of not so cool, because you need 6 more ints.
Maybe isheating() should use the degrees directly, as it is not used in time-critical anyways.
Then it would be much easier. to have the offsets without additional variables.
13 years ago
7a4be21b4f
made it compile if arduino decides to include files in a differnt order. DEC HEX and stuff now defined in MarlinSerial.h
13 years ago
716e89b87c
first homing move diagonal towards home switches.
13 years ago
d00b7e5587
repaired compiliation in windows
13 years ago
e4ab0e5982
more inlines
13 years ago
8cb29921a0
possible stepper release after sd printing
13 years ago
044886b4a0
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
13 years ago
b19c8b74b9
force inline
13 years ago
6d95644c0d
Moved M88 into M84. (M84 E)
13 years ago
311627141b
Merge branch 'smallopt' into Marlin_v1
...
Conflicts:
Marlin/temperature.h
13 years ago
7216a12856
Disabled M88 for boards that don't have seperate enable pins.
13 years ago
98805c9228
Added M88 command. (Request from Action68)
13 years ago
85da81e673
inlineing of small functions in serial
13 years ago
b9ad0bb2ce
removed unecessary indirect register adressing in serial.
13 years ago
dd5ca68c87
get rid of indirect ringbuffer calls, made some inlines, removed virtual and streaming class requirements.
13 years ago
dd5296ad4d
Fixed temperature reading bug.
...
(When using the lower and upper adc input bank)
13 years ago
f75f426dfa
Removed interrupt nesting in the stepper ISR.
...
Add serial checkRx in stepper ISR.
Copied HardwareSerial to MarlinSerial (Needed for checkRx).
13 years ago
2d9a715655
first naive attempt to have a offset in the homeing procedure. Does not enable to move into regions not allowed by endstops.
13 years ago
d2f034ba84
lcd message from gcode, m117
13 years ago
6aecf80278
add autotemp support to the lcd
13 years ago
b128d25f27
overlooked some inlines..
13 years ago
26a1de1e44
force inline
13 years ago
f8e170a44b
planner optimization by inline functions
13 years ago
aad4b75b94
First parts 2nd extruder
13 years ago
a0dc66f7bf
Home retract distance configureable per axis.
13 years ago
6d6f323535
make an option if sd-card stop should release the steppers.
13 years ago
4d6a5c29df
disable steppers as routine in stepper.cpp
13 years ago
74d0032e25
cooldown blocking selectable by #define.
13 years ago
191f36b493
slowdown
13 years ago
c54a807824
overworked ultralcd a bit
13 years ago
a6823a84e1
another typo
13 years ago
57e163e989
typo
13 years ago
b58787a367
now velocities are also set in mm/sec in gcode.
13 years ago
71ca78982b
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
13 years ago
235051253a
overworked lcd+eeprom to have only mm/sec and PID including pid_dt
13 years ago
27654bfe69
Fixed variable (removed 0x)
13 years ago
cdf0bd4e63
Fixed config bug when EEPROM was disabled
13 years ago
6ac9b2e761
Fixed residency time bug. (Thanks to Sound :-) )
13 years ago
ac8adabb2b
Small nominal speed improvement.
13 years ago
0e0e4945d8
Removed ISR overtaken message from ISR routine
13 years ago
c0f8c9fd72
Seperate ENDSTOP_INVERTING for X Y and Z
...
Added simple endstop filter.
Corrected M114 count display.
13 years ago
5535e51bf6
Yes, thats the beta.
13 years ago
8b14a8ad34
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
13 years ago
924bab1a03
less lcd flickering
13 years ago
379ea642e1
make tuneing sub-menu.
13 years ago
959d82e81e
Small temperature disable bug.
13 years ago
15bb3f284e
Merge branch 'Marlin_v1', remote-tracking branch 'origin/Marlin_v1' into Marlin_v1
13 years ago
4e5becfc51
Added endstop reporting
13 years ago
eeb4f029db
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
13 years ago
b21d5193f2
made ultralcd compatible with folders.
13 years ago
2e43f9c809
Changed min max temperature code.
13 years ago
cd2268f10a
code cleanup in ultralcd.
13 years ago
0e7fee9a9b
Merge branch 'Marlin_v1', remote-tracking branch 'origin/Marlin_v1' into Marlin_v1
13 years ago
915ef2d4a1
Added software endstops
13 years ago
e87df99e22
update mcode documentation
13 years ago
8a1e719a3f
overworked config file
13 years ago
5ad1d19384
make it compile without sd_support
13 years ago
7a2d1f5aeb
add M17, so the enable stepper button works in repg.
13 years ago
e02af3e66a
Merge remote-tracking branch 'origin/Marlin_v1' into Marlin_v1
13 years ago
537b5c155d
Fixed arc flowrate.
13 years ago
953d830bba
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
13 years ago
2a6afee832
make it compile without autotemp
13 years ago
f52e1a9571
autotemp working, default=disabled.
13 years ago
6e6fdb9a4e
Merge remote-tracking branch 'origin/Marlin_v1' into Marlin_v1
13 years ago
6841a10446
Fixed max/min temperature bug
13 years ago
8a08b8e07e
trying to get autotemp to work.
13 years ago
f0154de5b3
found bug that disabled printing from root.
13 years ago
70650c331d
corrected the ultimaker default values, the previous had a calculation error: see: http://groups.google.com/group/ultimaker/browse_thread/thread/91906788639703cf
13 years ago
9d90220537
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
13 years ago
869cee74e6
host-based sd card printing seems now to work with folders
13 years ago
70abca195a
overworked cardreader for folder support; not finished yet.
13 years ago
ff69e0a772
Changed max/min temp init. Removed second uart from sabguino core
13 years ago
1e5e141ac9
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
13 years ago
edb5ea7efa
the normal config again..
13 years ago
5df5727e93
removed some debugging comments
13 years ago
64f2121ab1
updated to sdfatlib2010902
13 years ago
b15902d3b5
Fixed bug in configuration.h
13 years ago
e63e224a33
Merge remote-tracking branch 'origin/Marlin_v1' into Marlin_v1
...
Conflicts:
Marlin/Configuration.h
Marlin/Marlin.pde
13 years ago
e7dca8614b
Advance experiments. Not working yet.
13 years ago
46f80e82d9
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
...
Conflicts:
Marlin/ultralcd.h
13 years ago
a9c7da06e3
and changed ultipanel to have the mm/sec and not mm/min
...
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
Conflicts:
Marlin/Marlin.pde
Marlin/ultralcd.h
13 years ago
02b9eceead
show sd%
13 years ago
7919a40d06
watchdog,percent done,
13 years ago
805d37f77b
Fixed some small planner bugs
13 years ago
5fd41ae872
Some fixes in planner
13 years ago
95126c09c0
Added slowdown
13 years ago
331e82dcd3
Buffer size > 16
13 years ago
2643ae93d6
Added modified Sanguino files
13 years ago
c00eefb824
Merge remote-tracking branch 'origin/Marlin_v1' into Marlin_v1
13 years ago
1d0452f10c
250000 baud
13 years ago
c57906b627
fixed bug with adjusting ki in realtime.
13 years ago
ac82411c73
Merge remote-tracking branch 'origin/Marlin_v1' into Marlin_v1
13 years ago
65934eee9c
A lot of changes in the planner code
13 years ago
9980ceb4a3
added a m400, that finished all moves,
...
and the mechanism so that if an endstop is hit it the ISR, the steps_to_be_taken are stored, and some current_block data that will be deleted in the next move
If the normal loop() then finds such an event, the position is calculated (floats would have taken too long in the ISR) A serial message is generated.
13 years ago
ff592b056a
heater power repair.
13 years ago
e9adfa27b5
re-enabled heaterpower as storage for the current storage of the heater PWM duty cycle.
...
the M301 now returns the current PID settings of the machine.
M105 returns heating pwm duty cylce as "@:"
13 years ago
36958ee305
minor changes and first not-well working version of autotemp
13 years ago
ba8a53a40f
Streaming.h is gone. It conflicted with PROGMEM. And saving memory is more important than nicer code, imho
13 years ago
27361e7cd0
beautified the config. ordered it into thematic sections.
13 years ago
ab154d5592
project progmem finished: total change with ultipanel: 2456 byte free ram initial. now: 4374 ram.
13 years ago
7b70caab7c
made progmem mainly, found one bug in cardreader, added a empty class for cardreader in case no sd support.
13 years ago
72ace55e6a
better visibility of public/private/imported variables
13 years ago
977fd2b2c7
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
13 years ago
907daa49af
made loop counters uint8_t most were int(16_t) before
13 years ago
e3af73ee0c
Thermistor name problem
13 years ago
0b43761c3a
preprocessor magic to have a single source principle
13 years ago
156763d027
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
13 years ago
fc0064e525
made cardreader more selfsustained
13 years ago
d3bfffcb6e
Corrected thermistor naming
13 years ago
01df04e02c
first compile with the cardreader class
13 years ago
163efdf1c7
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
13 years ago
87aaf0f70a
static'ified Marlin.pde.
13 years ago
5cf349a24a
Fixed some arc bugs
13 years ago
79d1bfb5c0
made many possible variables static, so they cannot be used extern.
13 years ago
76b3f805c0
Added teensylu pins
13 years ago
1d171e9e52
reformating and some minor bugs/things found on the way.
13 years ago
900e0c9bf2
overworked the serial responses. Quite difficult, since many texts are Pronterface protocol.
13 years ago
1740a83e11
correcting commit errors.
13 years ago
7cc358b56b
wrong file location
13 years ago
e8092898b1
watchdog into dedicated file
13 years ago
2afb7bd4cf
refactured temperature.cpp so that there are now abstract functions to access temperatures.
13 years ago
0b82465168
First arcs version. (Arcs not working ok)
13 years ago
2e8e8878e5
Corrected temp variables.
13 years ago
04d3b5537f
Merge remote-tracking branch 'origin/Marlin_v1' into Marlin_v1
...
Conflicts:
Marlin/Configuration.h
Marlin/EEPROMwrite.h
Marlin/Marlin.h
Marlin/Marlin.pde
Marlin/temperature.cpp
Marlin/temperature.h
Marlin/thermistortables.h
13 years ago
d15f01e1b4
Temperature changes
13 years ago
ea86a5e10f
moved the variables in the ISR, thats the most normal use case of static.
13 years ago
b9ea0651ec
Revert "this is not working. Do you maybe know why?"
...
This reverts commit 8bcdb9f5f0
13 years ago
8bcdb9f5f0
this is not working. Do you maybe know why?
13 years ago
40e8081623
changed end of line to windows, which seems to be the majority of developers main platform.
13 years ago
00674af3a8
merge from the branch bkubicek/Marlin/zalmmerge
13 years ago
d7c4f0780b
Added M42, M80 and M81
13 years ago
95d3d9847c
M109 now equal to sprinter
13 years ago
bf879ceaa9
Added thermistor tables
13 years ago
094afe7c10
Merged Marlin, Marlin non gen6 and Ultimaker changes
13 years ago
0b1423c303
Fixed crashes.
13 years ago
27664c6da6
Software endstps added
13 years ago
8e017b81ab
Sync with non-gen6 version
13 years ago
b5f6482dce
Fixed small feedrate bug.
...
Copied Camiels comments in the Configuration.h file
14 years ago
0024a26ccf
Fixed lookup table bug.
14 years ago
5a1787b2f4
Fix M109
14 years ago
26bf57e22c
first-commit
14 years ago
f850af5c1c
Signed-off-by: Erik van der Zalm <erik@vdzalm.eu>
14 years ago
750f6c33e3
first commit
14 years ago
Gord Christmas