microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

Merge branch 'Marlin_v1', remote-tracking branch 'origin/Marlin_v1' into Marlin_v1

Browse Source
2.0.x
Erik van der Zalm 13 years ago
parent af22e9cd38 7714b98da7
commit 95a0b28acb
14 changed files with 515 additions and 449 deletions
Show Stats Download Patch File Download Diff File

1
Marlin/Configuration.h
Unescape Escape View File

@ -214,6 +214,7 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
#define X_HOME_RETRACT_MM 5
#define Y_HOME_RETRACT_MM 5
#define Z_HOME_RETRACT_MM 1
#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
#define AXIS_RELATIVE_MODES {false, false, false, false}

21
Marlin/Marlin.h
Unescape Escape View File

@ -16,7 +16,6 @@
#include "Configuration.h"
#include "MarlinSerial.h"
#define FORCE_INLINE __attribute__((always_inline)) inline
//#define SERIAL_ECHO(x) Serial << "echo: " << x;
//#define SERIAL_ECHOLN(x) Serial << "echo: "<<x<<endl;
@ -25,15 +24,25 @@
//#define SERIAL_PROTOCOL(x) Serial << x;
//#define SERIAL_PROTOCOLLN(x) Serial << x<<endl;
//this is a unfinsihed attemp to removes a lot of warning messages, see:
// http://www.avrfreaks.net/index.php?name=PNphpBB2&file=printview&t=57011
//typedef char prog_char PROGMEM;
// //#define PSTR (s ) ((const PROGMEM char *)(s))
// //# define MYPGM(s) (__extension__({static prog_char __c[] = (s); &__c[0];}))
// //#define MYPGM(s) ((const prog_char *g PROGMEM=s))
// //#define MYPGM(s) PSTR(s)
#define MYPGM(s) (__extension__({static char __c[] __attribute__((__progmem__)) = (s); &__c[0];})) //This is the normal behaviour
//#define MYPGM(s) (__extension__({static prog_char __c[] = (s); &__c[0];})) //this does not work but hides the warnings
#define SERIAL_PROTOCOL(x) MSerial.print(x);
#define SERIAL_PROTOCOLPGM(x) serialprintPGM(PSTR(x));
#define SERIAL_PROTOCOLPGM(x) serialprintPGM(MYPGM(x));
#define SERIAL_PROTOCOLLN(x) {MSerial.print(x);MSerial.write('\n');}
#define SERIAL_PROTOCOLLNPGM(x) {serialprintPGM(PSTR(x));MSerial.write('\n');}
#define SERIAL_PROTOCOLLNPGM(x) {serialprintPGM(MYPGM(x));MSerial.write('\n');}
const char errormagic[] PROGMEM ="Error:";
const char echomagic[] PROGMEM ="echo:";
const prog_char errormagic[] PROGMEM ="Error:";
const prog_char echomagic[] PROGMEM ="echo:";
#define SERIAL_ERROR_START serialprintPGM(errormagic);
#define SERIAL_ERROR(x) SERIAL_PROTOCOL(x)
#define SERIAL_ERRORPGM(x) SERIAL_PROTOCOLPGM(x)
@ -50,7 +59,7 @@ const char echomagic[] PROGMEM ="echo:";
//things to write to serial from Programmemory. saves 400 to 2k of RAM.
#define SerialprintPGM(x) serialprintPGM(PSTR(x))
#define SerialprintPGM(x) serialprintPGM(MYPGM(x))
FORCE_INLINE void serialprintPGM(const char *str)
{
char ch=pgm_read_byte(str);

7
Marlin/Marlin.pde
Unescape Escape View File

@ -167,7 +167,8 @@ static char *strchr_pointer; // just a pointer to find chars in the cmd string l
const int sensitive_pins[] = SENSITIVE_PINS; // Sensitive pin list for M42
static float tt = 0, bt = 0;
//static float tt = 0;
//static float bt = 0;
//Inactivity shutdown variables
static unsigned long previous_millis_cmd = 0;
@ -532,7 +533,7 @@ FORCE_INLINE void process_commands()
}
feedrate = 0.0;
home_all_axis = !((code_seen(axis_codes[0])) || (code_seen(axis_codes[1])) || (code_seen(axis_codes[2])));
#ifdef QUICK_HOME
if( code_seen(axis_codes[0]) && code_seen(axis_codes[1]) ) //first diagonal move
{
current_position[X_AXIS] = 0; current_position[Y_AXIS] = 0;
@ -545,6 +546,7 @@ FORCE_INLINE void process_commands()
prepare_move();
current_position[X_AXIS] = 0; current_position[Y_AXIS] = 0;
}
#endif
if((home_all_axis) || (code_seen(axis_codes[X_AXIS])))
{
@ -669,6 +671,7 @@ FORCE_INLINE void process_commands()
SERIAL_ECHO_START;
SERIAL_ECHOLN(time);
LCD_MESSAGE(time);
autotempShutdown();
}
break;
case 42: //M42 -Change pin status via gcode

1
Marlin/MarlinSerial.cpp
Unescape Escape View File

@ -20,6 +20,7 @@
Modified 28 September 2010 by Mark Sproul
*/
#include <stdlib.h>
#include <stdio.h>
#include <string.h>

2
Marlin/MarlinSerial.h
Unescape Escape View File

@ -120,7 +120,7 @@ class MarlinSerial //: public Stream
FORCE_INLINE void print(const String &s)
{
for (int i = 0; i < s.length(); i++) {
for (int i = 0; i < (int)s.length(); i++) {
write(s[i]);
}
}

2
Marlin/cardreader.h
Unescape Escape View File

@ -59,7 +59,7 @@ private:
LsAction lsAction; //stored for recursion.
int16_t nrFiles; //counter for the files in the current directory and recycled as position counter for getting the nrFiles'th name in the directory.
char* diveDirName;
void lsDive(char *prepend,SdFile parent);
void lsDive(const char *prepend,SdFile parent);
};

3
Marlin/cardreader.pde
Unescape Escape View File

@ -40,7 +40,7 @@ char *createFilename(char *buffer,const dir_t &p) //buffer>12characters
}
void CardReader::lsDive(char *prepend,SdFile parent)
void CardReader::lsDive(const char *prepend,SdFile parent)
{
dir_t p;
uint8_t cnt=0;
@ -436,5 +436,6 @@ void CardReader::printingHasFinished()
{
finishAndDisableSteppers();
}
autotempShutdown();
}
#endif //SDSUPPORT

25
Marlin/planner.cpp
Unescape Escape View File

@ -91,7 +91,7 @@ static float previous_nominal_speed; // Nominal speed of previous path line segm
#ifdef AUTOTEMP
float autotemp_max=250;
float autotemp_min=210;
float autotemp_factor=1;
float autotemp_factor=0.1;
bool autotemp_enabled=false;
#endif
@ -107,10 +107,12 @@ volatile unsigned char block_buffer_tail; // Index of the block to pro
//=============================private variables ============================
//===========================================================================
// Used for the frequency limit
static unsigned char old_direction_bits = 0; // Old direction bits. Used for speed calculations
static long x_segment_time[3]={0,0,0}; // Segment times (in us). Used for speed calculations
static long y_segment_time[3]={0,0,0};
#ifdef XY_FREQUENCY_LIMIT
// Used for the frequency limit
static unsigned char old_direction_bits = 0; // Old direction bits. Used for speed calculations
static long x_segment_time[3]={0,0,0}; // Segment times (in us). Used for speed calculations
static long y_segment_time[3]={0,0,0};
#endif
// Returns the index of the next block in the ring buffer
// NOTE: Removed modulo (%) operator, which uses an expensive divide and multiplication.
@ -254,7 +256,7 @@ void planner_reverse_pass_kernel(block_t *previous, block_t *current, block_t *n
// planner_recalculate() needs to go over the current plan twice. Once in reverse and once forward. This
// implements the reverse pass.
void planner_reverse_pass() {
char block_index = block_buffer_head;
uint8_t block_index = block_buffer_head;
if(((block_buffer_head-block_buffer_tail + BLOCK_BUFFER_SIZE) & (BLOCK_BUFFER_SIZE - 1)) > 3) {
block_index = (block_buffer_head - 3) & (BLOCK_BUFFER_SIZE - 1);
block_t *block[3] = { NULL, NULL, NULL };
@ -293,7 +295,7 @@ void planner_forward_pass_kernel(block_t *previous, block_t *current, block_t *n
// planner_recalculate() needs to go over the current plan twice. Once in reverse and once forward. This
// implements the forward pass.
void planner_forward_pass() {
char block_index = block_buffer_tail;
uint8_t block_index = block_buffer_tail;
block_t *block[3] = { NULL, NULL, NULL };
while(block_index != block_buffer_head) {
@ -383,7 +385,7 @@ void getHighESpeed()
return; //do nothing
float high=0;
char block_index = block_buffer_tail;
uint8_t block_index = block_buffer_tail;
while(block_index != block_buffer_head) {
float se=block_buffer[block_index].steps_e/float(block_buffer[block_index].step_event_count)*block_buffer[block_index].nominal_rate;
@ -422,7 +424,7 @@ void check_axes_activity() {
block_t *block;
if(block_buffer_tail != block_buffer_head) {
char block_index = block_buffer_tail;
uint8_t block_index = block_buffer_tail;
while(block_index != block_buffer_head) {
block = &block_buffer[block_index];
if(block->steps_x != 0) x_active++;
@ -518,8 +520,7 @@ void plan_buffer_line(const float &x, const float &y, const float &z, const floa
block->nominal_speed = block->millimeters * inverse_second; // (mm/sec) Always > 0
block->nominal_rate = ceil(block->step_event_count * inverse_second); // (step/sec) Always > 0
// segment time im micro seconds
long segment_time = lround(1000000.0/inverse_second);
if (block->steps_e == 0) {
@ -537,6 +538,8 @@ void plan_buffer_line(const float &x, const float &y, const float &z, const floa
#endif
/*
// segment time im micro seconds
long segment_time = lround(1000000.0/inverse_second);
if ((blockcount>0) && (blockcount < (BLOCK_BUFFER_SIZE - 4))) {
if (segment_time<minsegmenttime) { // buffer is draining, add extra time. The amount of time added increases if the buffer is still emptied more.
segment_time=segment_time+lround(2*(minsegmenttime-segment_time)/blockcount);

7
Marlin/stepper.cpp
Unescape Escape View File

@ -21,6 +21,7 @@
/* The timer calculations of this module informed by the 'RepRap cartesian firmware' by Zack Smith
and Philipp Tiefenbacher. */
#include "stepper.h"
#include "Configuration.h"
#include "Marlin.h"
@ -454,7 +455,7 @@ ISR(TIMER1_COMPA_vect)
// Calculare new timer value
unsigned short timer;
unsigned short step_rate;
if (step_events_completed <= current_block->accelerate_until) {
if (step_events_completed <= (unsigned long int)current_block->accelerate_until) {
MultiU24X24toH16(acc_step_rate, acceleration_time, current_block->acceleration_rate);
acc_step_rate += current_block->initial_rate;
@ -478,7 +479,7 @@ ISR(TIMER1_COMPA_vect)
#endif
}
else if (step_events_completed > current_block->decelerate_after) {
else if (step_events_completed > (unsigned long int)current_block->decelerate_after) {
MultiU24X24toH16(step_rate, deceleration_time, current_block->acceleration_rate);
if(step_rate > acc_step_rate) { // Check step_rate stays positive
@ -695,7 +696,7 @@ void st_set_e_position(const long &e)
CRITICAL_SECTION_END;
}
long st_get_position(char axis)
long st_get_position(uint8_t axis)
{
long count_pos;
CRITICAL_SECTION_START;

2
Marlin/stepper.h
Unescape Escape View File

@ -34,7 +34,7 @@ void st_set_position(const long &x, const long &y, const long &z, const long &e)
void st_set_e_position(const long &e);
// Get current position in steps
long st_get_position(char axis);
long st_get_position(uint8_t axis);
// The stepper subsystem goes to sleep when it runs out of things to execute. Call this
// to notify the subsystem that it is time to go to work.

19
Marlin/temperature.cpp
Unescape Escape View File

@ -67,7 +67,8 @@ int heatingtarget_raw[3]= {0, 0, 0};
//===========================================================================
static bool temp_meas_ready = false;
static unsigned long previous_millis_heater, previous_millis_bed_heater;
static unsigned long previous_millis_bed_heater;
//static unsigned long previous_millis_heater;
#ifdef PIDTEMP
//static cannot be external:
@ -80,8 +81,8 @@ static unsigned long previous_millis_heater, previous_millis_bed_heater;
static float pid_error;
static float temp_iState_min;
static float temp_iState_max;
static float pid_input;
static float pid_output;
// static float pid_input;
// static float pid_output;
static bool pid_reset;
#endif //PIDTEMP
@ -94,8 +95,8 @@ static unsigned long previous_millis_heater, previous_millis_bed_heater;
// Init min and max temp with extreme values to prevent false errors during startup
static int minttemp_0 = 0;
static int maxttemp_0 = 16383;
static int minttemp_1 = 0;
static int maxttemp_1 = 16383;
//static int minttemp_1 = 0;
//static int maxttemp_1 = 16383;
static int bed_minttemp = 0;
static int bed_maxttemp = 16383;
@ -268,7 +269,10 @@ int temp2analogBed(int celsius) {
return (1023 * OVERSAMPLENR) - raw;
#elif defined BED_USES_AD595
return lround(celsius * (1024.0 * OVERSAMPLENR/ (5.0 * 100.0) ) );
#else
#warning No heater-type defined for the bed.
#endif
return 0;
}
// Derived from RepRap FiveD extruder::getTemperature()
@ -296,6 +300,8 @@ float analog2temp(int raw) {
return celsius;
#elif defined HEATER_0_USES_AD595
return raw * ((5.0 * 100.0) / 1024.0) / OVERSAMPLENR;
#else
#error PLEASE DEFINE HEATER TYPE
#endif
}
@ -328,7 +334,10 @@ float analog2tempBed(int raw) {
#elif defined BED_USES_AD595
return raw * ((5.0 * 100.0) / 1024.0) / OVERSAMPLENR;
#else
#warning No heater-type defined for the bed.
#endif
return 0;
}
void tp_init()

18
Marlin/temperature.h
Unescape Escape View File

@ -86,7 +86,7 @@ FORCE_INLINE void setTargetHotend0(const float &celsius)
#endif //PIDTEMP
};
FORCE_INLINE void setTargetHotend1(const float &celsius) { target_raw[TEMPSENSOR_HOTEND_1]=temp2analog(celsius);};
FORCE_INLINE float setTargetHotend(const float &celcius, uint8_t extruder){
FORCE_INLINE void setTargetHotend(const float &celcius, uint8_t extruder){
if(extruder == 0) setTargetHotend0(celcius);
if(extruder == 1) setTargetHotend1(celcius);
};
@ -94,20 +94,32 @@ FORCE_INLINE void setTargetBed(const float &celsius) { target_raw[TEMPSENSO
FORCE_INLINE bool isHeatingHotend0() {return heatingtarget_raw[TEMPSENSOR_HOTEND_0] > current_raw[TEMPSENSOR_HOTEND_0];};
FORCE_INLINE bool isHeatingHotend1() {return target_raw[TEMPSENSOR_HOTEND_1] > current_raw[TEMPSENSOR_HOTEND_1];};
FORCE_INLINE float isHeatingHotend(uint8_t extruder){
FORCE_INLINE bool isHeatingHotend(uint8_t extruder){
if(extruder == 0) return heatingtarget_raw[TEMPSENSOR_HOTEND_0] > current_raw[TEMPSENSOR_HOTEND_0];
if(extruder == 1) return target_raw[TEMPSENSOR_HOTEND_1] > current_raw[TEMPSENSOR_HOTEND_1];
return false;
};
FORCE_INLINE bool isHeatingBed() {return target_raw[TEMPSENSOR_BED] > current_raw[TEMPSENSOR_BED];};
FORCE_INLINE bool isCoolingHotend0() {return target_raw[TEMPSENSOR_HOTEND_0] < current_raw[TEMPSENSOR_HOTEND_0];};
FORCE_INLINE bool isCoolingHotend1() {return target_raw[TEMPSENSOR_HOTEND_1] < current_raw[TEMPSENSOR_HOTEND_1];};
FORCE_INLINE float isCoolingHotend(uint8_t extruder){
FORCE_INLINE bool isCoolingHotend(uint8_t extruder){
if(extruder == 0) return target_raw[TEMPSENSOR_HOTEND_0] < current_raw[TEMPSENSOR_HOTEND_0];
if(extruder == 1) return target_raw[TEMPSENSOR_HOTEND_1] < current_raw[TEMPSENSOR_HOTEND_1];
return false;
};
FORCE_INLINE bool isCoolingBed() {return target_raw[TEMPSENSOR_BED] < current_raw[TEMPSENSOR_BED];};
FORCE_INLINE void autotempShutdown(){
#ifdef AUTOTEMP
if(autotemp_enabled)
{
autotemp_enabled=false;
if(degTargetHotend0()>autotemp_min)
setTargetHotend0(0);
}
#endif
}
void disable_heater();
void setWatch();
void updatePID();

5
Marlin/ultralcd.h
Unescape Escape View File

@ -1,7 +1,7 @@
#ifndef __ULTRALCDH
#define __ULTRALCDH
#include "Configuration.h"
#include "Marlin.h"
#ifdef ULTRA_LCD
void lcd_status();
@ -104,7 +104,6 @@
curencoderpos=maxlines*lcdslow;
}
lastencoderpos=encoderpos=curencoderpos;
int lastactiveline=activeline;
activeline=curencoderpos/lcdslow;
if(activeline<0) activeline=0;
if(activeline>LCD_HEIGHT-1) activeline=LCD_HEIGHT-1;
@ -137,7 +136,7 @@
#define LCD_MESSAGE(x) lcd_status(x);
#define LCD_MESSAGEPGM(x) lcd_statuspgm(PSTR(x));
#define LCD_MESSAGEPGM(x) lcd_statuspgm(MYPGM(x));
#define LCD_STATUS lcd_status()
#else //no lcd
#define LCD_STATUS

851
Marlin/ultralcd.pde
View File

File diff suppressed because it is too large Load Diff
Write Preview
Loading…
Cancel
Save