3488 Commits (b0a4ea79b84e92326b7da4349126a5cf2d9821a0)

Author SHA1 Message Date
Robby Candra a3f67acd6d Fix Power Loss Recovery file delete (#13522) 6 years ago
Marcio Teixeira d992dfe7d5 Use the percent util func in the string func. (#13523) 6 years ago
drzejkopf b1f739e27b CR10_STOCKDISPLAY support in Bigtreetech SKR (#13516) 6 years ago
Marcio Teixeira 5679fae11e UltraLCD enhancements (lower fan resolution, backlash menu) (#13519) 6 years ago
Msq001 f0d14b83bc Save/restore Relative modes in Power-Loss Recovery (#13501) 6 years ago
Marcio Teixeira c6466c23fe Silence signed/unsigned comparison warning. (#13508) 6 years ago
InsanityAutomation 7240e3a68f Allow G26 with no heated bed (#13511) 6 years ago
Alexander Gavrilenko 6d9aaca082 Fix compilation error for MKS Robin (#13506) 6 years ago
Scott Alfter c6dbe6e9d6 Fix Teensy 3.5/3.6 __get_primask (#13514) 6 years ago
Alexander Amelkin e40636a7c1 Replace digitalPinHasPWM with HAS_TIMER (#13520) 6 years ago
Scott Lahteine b46ca9aa94 Less timely comment, tweak conditions 6 years ago
InsanityAutomation eb91f08725 Update descriptions and dont call unneeded functions 6 years ago
Ludy fe346cd4d1 Fix DEBUG_EEPROM_READWRITE compile error (#13492) 6 years ago
Sam Lane e3ab54753b Add extra Linear Advance factors (#13490) 6 years ago
Chris Pepper ffc2c2d7c5 Move FAST_PWM_FAN code to HALs (#13491) 6 years ago
Thomas Moore 263f8edff8 Disable volumetric extrusion during G26 (#13479) 6 years ago
Bob Kuhn 6bd0a0be97 Relocate DUE Stepper ISR to TC0,2 (#13481) 6 years ago
Thomas Moore 13a12f8a87 Fix UBL mesh editor on delta (#13478) 6 years ago
Marcio Teixeira 7462fe3068 Fix compile error, squelch warnings (#13487)
- Fix path to `bedlevel.h` include file
- Add default to `case` statements to suppress warnings
6 years ago
Yannik Sembritzki 0d3ea59bcf Add pins for Dual Z UART on SKR 1.3 (#13474)
Fix #13470
6 years ago
pinchies ef3b93daa1 Fix STM32F1 SD-based EEPROM emulation (#13475)
If `openFile` is given `true`, then it has read-only access. Because all the writing occurs on the next line, this breaks SD card as EEPROM.
6 years ago
Chris Pepper aacc1148b0 Fix M106 for index > extruders (#13473) 6 years ago
Thomas Moore c5e96544b5 Fix vtool compiler warning (#13476) 6 years ago
Thomas Moore 02dc72acb6 Disable ABL when leveling corners (#13471) 6 years ago
7eggert d96f7d6068 Minimum segments for G2/G3. Better for small arcs. (#13466) 6 years ago
Scott Lahteine 380c771988 Handle word-padded flash-based eeprom (STM32F1)
Fix #13445
6 years ago
Scott Alfter 32332bcd03 Proceed with Teensy 3.5/3.6 HAL (#13450) 6 years ago
Scott Alfter 407202cc0f Fix BLTouch pre-3.0 compatibility (#13454) 6 years ago
Marcio Teixeira a0ca98f699 Additional ExtUI features (#13449) 6 years ago
Sam Lane a8fa275dc6 Fix Fan 0 responding to all fan speeds (#13444) 6 years ago
InsanityAutomation 5eeffab5e5 Fix BLTouch Menus (#13441) 6 years ago
Scott Lahteine d8329d858d Default argument to defer_status_screen 6 years ago
Giuliano Zaro 9562a02c5a Update Italian language (#13440) 6 years ago
drzejkopf 70e6a3db8a Add LEVEL_CORNERS_HEIGHT to LEVEL_BED_CORNERS (#13439) 6 years ago
Roman Moravčík f3cf95a937 Update Slovak language. (#13435) 6 years ago
Scott Lahteine 144018736a Use USES_Z_MIN_PROBE_ENDSTOP 6 years ago
InsanityAutomation 5b2c37d6c1 Followup to BLTouch (#13422) 6 years ago
InsanityAutomation 3fb8489ae3 EXTUI and UBL compilation fixes (#13420) 6 years ago
Scott Lahteine b376c7e374 Group DISABLED items 6 years ago
Scott Lahteine 58bca67883 Unify status scrolling further 6 years ago
Scott Lahteine c4443f885e finishstatus => finish_status 6 years ago
InsanityAutomation 691e5c3bb8 BLTouch V3.0 support (#13406) 6 years ago
Scott Lahteine 49cf92dc36
Extended condition macros (#13419)
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
6 years ago
Tobias Frost d20eab4f83 Fix macro in set_color() (#13417) 6 years ago
Ludy 59353546e8 Fix BUTTON_EXISTS and misplaced comma (#13411)
Fixes #13410 and redeclaration of `BUTTON_EXISTS`
6 years ago
InsanityAutomation 09eb30dc05 IDEX Mirror mode based on Formbot / Vivedino Symmetric mode (#13404) 6 years ago
Scott Lahteine 5c1aa5162d Adjust M206 output in M503 for DELTA 6 years ago
Scott Lahteine ad8b82d054 Fix KILL_PIN assignment for MKS_MINI_12864
According to #13397
6 years ago
Scott Lahteine 3a916b4ef2 Create bresenham.h 6 years ago
Karl Andersson 5d3928cb01 PWM is not defined on Arduino Core STM32 (#13405) 6 years ago
Scott Lahteine 9a515cbd32
Fix Pause Print message and behavior (#13394) 6 years ago
Scott Lahteine f5bcc00570
Unify debugging output with debug_out.h (#13388) 6 years ago
Andrei Pozolotin cc8a871705 Add capability string CHAMBER_TEMPERATURE (#13391)
Reference: #13380
6 years ago
Scott Lahteine 67bee06e43 No patch needed for non-libmaple analogWrite
See https://github.com/pinchies/Marlin/pull/1#issuecomment-471388743
6 years ago
Scott Lahteine f89b375fb9
Fixes and improvements for PWM pins (#13383) 6 years ago
Scott Lahteine 87162658c4
Fix and improve software endstops (#13386) 6 years ago
Scott Lahteine 6214c997c0 Remove includes of <binary.h> 6 years ago
Scott Lahteine 4555ae448f Fixups for ESP32 6 years ago
Scott Lahteine a5ea3e2f15 Fix hotend offset on switching toolhead change
See commentary at #11623
6 years ago
jmz52 8e0ac93d60 Fix 'UNUSED redefined' compiler warning (#13387) 6 years ago
Hadrien Jouet 0278ad0a6d Add ESP32 WiFi interface (#11209) 6 years ago
InsanityAutomation c03df89921 ExtUI Mesh Leveling Extensions (#13363) 6 years ago
InsanityAutomation 050eac03af Single X Duplication Extension (#13373)
* Multi-nozzle selective duplication
* Use a bit-mask, reduce stepper_indirection.h size
* Tweak the multi-nozzle duplication description
* Use 'S' as a bool in M605
* Add HAS_DUPLICATION_MODE conditional
* Remove '_MODE' from the option name
* M605 in the style of Stacker M280
* Also include direct mask style (P)
6 years ago
Scott Lahteine ad91476d26 Fix USEABLE_HARDWARE_PWM 6 years ago
Scott Lahteine d63da4592d Tweak to SCARA_move_to_cal 6 years ago
Scott Lahteine 51ff5b68fa Clean up fastIO ahead of PWM patch 6 years ago
Scott Lahteine 388babbcea Tweak SERIAL_PRINTF 6 years ago
Scott Lahteine d94e077901 Apply HAS_HOTEND_OFFSET where needed 6 years ago
Scott Lahteine 11d6a939df Always define axis_unhomed_err 6 years ago
7eggert 10c8c034bd Allow both encoder and ADC keypad (#13355) 6 years ago
Scott Lahteine 0375e92847 Followup to serial rework
As mentioned in #13370
6 years ago
jmz52 013bb469ca Fix compilation for STM32F1 with no SDIO (#13366) 6 years ago
Scott Lahteine e52bcc9408 Limit top bed temp to BED_MAXTEMP - 10
The chances of a 10° overshoot is pretty minimal.
6 years ago
InsanityAutomation 785a7028bf Followup to 'volatile' patch (#13369)
Originally #13344
6 years ago
Scott Lahteine aa1d587128 Some LCD code cleanup 6 years ago
Scott Lahteine fa11427ec6 Remove obsolete LCD_CONTRAST 6 years ago
pinchies 4df9509ead Add support for printers with inverted fan pins (#13362)
Add support for printers with inverted fan pins by adding `#define FAN_INVERTING 1` to `Configuration_adv.h` and modifying the fan write macros.
6 years ago
Scott Lahteine 1f7e220387 Make HAL ISR macros function-like 6 years ago
Scott Lahteine e3ce346f24 Report position to host in Nozzle::park 6 years ago
Scott Lahteine 77b4176152 Use lib include for bit_constants.h 6 years ago
Scott Lahteine 3419099f0a Clean up whitespace 6 years ago
pinchies 4c43e6c48b Fix "spontaneous heating" issue (WRITE bug) on STM32 (#13356)
Should fix "spontanous heating" problems due to order of operations error. Error occurs at least with ststm32 v5.1.0 in PlatformIO.
6 years ago
Michiel Baird b824a517aa Add G38.4 and G38.5 (#13348) 6 years ago
Bruce j Beare e4d080e63c Reset after kill with a button on the KILL_PIN (#13091) 6 years ago
MoellerDi c36989c39e Fix chamber temperature measurement (#13350) 6 years ago
Scott Lahteine 12503fce06 Followup to wait_for_user fix 6 years ago
Scott Lahteine 33a08fc6f7 Fix typos from temperature rework
Followup to #12201
6 years ago
Tobias Frost 2efbcc90c5 Fix wait_for_user compile error (#13352) 6 years ago
Tobias Frost 60e82e3929 Send notifications to ExtUI for M0/M1 (#13344)
- Send notifications to ExtUI for M0/M1

- wait_for_user can be non-volatile (not changed by interrupt)
  C / C++ compilers don't optimize away reads of non-volatile variables when a function call is used between accesses, because *any* variable could be changed by the function call. Since `wait_for_user` can't be changed without a function call, it should be non-volatile so the compiler can optimize away cases where it is read more than once without an intervening function call.
6 years ago
Marcio Teixeira 00fc43144a Follow up fixes to various PRs. (#13334)
- Ensure `MarlinUI:get_progress` is defined for `ExtUI`.
- Fix for `BACKLASH_SMOOTHING` with small segments.
  `BACKLASH_SMOOTHING` with extremely small segments failed to fully correct due to the correction factor being rounded down. Rounding up ensures the entire backlash will converge to zero even for small segments.
- Add pinout for the beta revision `EINSY_RETRO`.
- Update soft endstops with tool offsets (for toolchange et. al. move clamping) (#12568)
6 years ago
Scott Lahteine c7d618b4d9 Fix SERIAL_ECHOLNPAIR
Fix #13333
6 years ago
InsanityAutomation d54741eda8 Update some G26 plausible values. Add speed control. (#13330) 6 years ago
Msq001 fb3302feda Fix STM32F1 Serial and ADC pins (#13331) 6 years ago
Reece Kibble dbead66988 Allows user to set (almost) any PWM frequency (#12638) 6 years ago
Tobias Frost afbec5ff7e Have ExtUI::getProgress use ui.get_progress (#13328) 6 years ago
3dlabsio 645ca7af7a M141 Heated Chamber, Temperature rework (#12201) 6 years ago
Scott Lahteine 44571775bd Further support for 6 extruders 6 years ago
Scott Lahteine 893ee68b52 Clean up trailing whitespace 6 years ago
Scott Lahteine 39f1222060 One fewer G29 error string 6 years ago
Scott Lahteine cfdb38eda4
Allow SERIAL_ECHOPAIR to take up to 12 pairs (#13311) 6 years ago
Scott Lahteine 4771e372a1
Update criteria for PAUSE/RESUME/STOP menu items (#13294) 6 years ago
Tobias Frost 56fdcf93d1 Disallow SD_DETECT_INVERTED with FYSETC F6. (#13307) 6 years ago
Tobias Frost 7ce13a6ec1 Fix a print_job_timer compile error (#13304) 6 years ago
Tobias Frost 6df51201ae Include EXTENSIBLE_UI in single LCD sanity check (#13306) 6 years ago
Scott Lahteine 2e5a3b01fd Save Power Loss Recovery only on move commands 6 years ago
Scott Lahteine 15738ea506 Update a motion comment 6 years ago
Scott Lahteine bc87e97357 Prevent a tool change move out of bounds 6 years ago
Scott Lahteine 2212da453a
Distinguish between analog/digital auto fans (#13298) 6 years ago
Chris Pepper 2513f6b550
Fix multiport G28 with Binary Transfer (#13308) 6 years ago
Chris Pepper 38bef9da91 Report auto temp to both serial ports, if available (#13301) 6 years ago
Robert Mendon 367d392880 Init stepper current after stepper pins are set up (#13302) 6 years ago
InsanityAutomation bf8b38e0f7 Relocate configs above Marlin/src folder (#13299) 6 years ago
Scott Lahteine d71dc5cf42 Fix for Ender 4 fan/case light pin
See #12731
6 years ago
Anthony Rich 7640b328df Support for Tronxy X5S 2e (#13297) 6 years ago
Scott Lahteine 599cdc3f0f Remove dead code from get_pid_output
See #12981
6 years ago
Scott Lahteine 35ae5daf2d Split up sdcard G-codes 6 years ago
Scott Lahteine 3f36a38512 Clean up some pre-serial-redirect includes 6 years ago
Scott Lahteine fa0d909dd3 Add FIL_RUNOUT_PIN for BIGTREE_SKR_V1.3
See #13267
6 years ago
Ludy bd4160dbaf Unused CS_ACTUAL_sb (#13282) 6 years ago
Vasily Evseenko 71773b128d Fix stepper use before init. Add Ultimaker2+ Extended clone config (#13284) 6 years ago
Scott Lahteine edc4e037c4 Add a note to G10 6 years ago
Tobias Frost 57afd0ab37 Fix range check bug in FileList::seek() (#13286)
When `count()` returns 0, `pos > (count()-1)` will always yield `true` due to integer underflow.
6 years ago
kAdonis 05c2f80826 Fix bug in wait-for-heatup (#13290) 6 years ago
Chris Pepper b0553d2d97 Add M997 support and simple implementation for LPC176x (#13281) 6 years ago
Scott Lahteine fa236e9718 General cleanup ahead of L64XX 6 years ago
Scott Lahteine 2f1e1dcb42 Gradual step towards EXTRUDERS 0 support 6 years ago
Scott Lahteine 99d0022fae
Drop the Z_MIN_PROBE_ENDSTOP option (#13276) 6 years ago
Scott Lahteine 9a6b90f47d TMC2660.h comment tweaks 6 years ago
Scott Lahteine a2e3226597 Init XYZ to configured home position 6 years ago
Scott Lahteine 4fbbce9a35 Marlin Dev Mode for DOGM status screen 6 years ago
InsanityAutomation e2e2a55d9b Add thermistor type 67 SliceEng (#13275) 6 years ago
Msq001 5b7ad3a5a0 Fix SKR onboard TF card CS pin (#13272) 6 years ago
Scott Lahteine 7fde3ed915 Skip hysteresis check when temp is already close to target
To eliminate a long delay during pause, park, and filament change
6 years ago
Chris Pepper 7de6476b3d
Fix binary protocol error 6 years ago
Scott Lahteine 2c10222e87 card.transfer_port => transfer_port_index 6 years ago
Chris Pepper 4ab433d391 Fix binary protocol with one serial port (#13270)
- The `sdcard.transfer_port` variable is Marlin's internal serial port index, not the physical serial port number.
- Added packet number to "ok" response so hosts don't need to wait for the ACK.
- Renamed feature to `BINARY_FILE_TRANSFER`, as the speed up is only consequential to the ability to transfer binaries over serial.
6 years ago
InsanityAutomation eb4bf93ea4 Add more Babystep options (#13262) 6 years ago
Scott Lahteine f37df28d17 UBL G29 T current position fix
Counterpart to #12845
6 years ago
Msq001 f8a39919fa Add Bigtree SKR 1.3 board (#13267)
Co-Authored-By: Msq001 <msq001@users.noreply.github.com>
6 years ago
Bob Kuhn ddbe4cfa20 Printrboard G2 support (#13116) 6 years ago
Scott Lahteine 4200f9ed62 Hide freeMemory et.al. warnings 6 years ago
Scott Lahteine dc88747770 Fix Due GET_ARRAY_IS_DIGITAL
Co-Authored-By: bob-the-kuhn <bob.kuhn@att.net>
6 years ago
Scott Lahteine a79b9bbe6b Cleanup whitespace, add a const 6 years ago
Giuliano Zaro 2616e4d4d9 Remove duplicated 'chitchat' defines (#13258) 6 years ago
Scott Lahteine 5d28575d4d Clean up some motion code 6 years ago
Scott Lahteine 808b076000 Update some ABL/UBL conditionals 6 years ago
Scott Lahteine 833c2e54a1 Add an empty flushTX to MarlinSerialUSB_Due 6 years ago
Scott Lahteine 38363902c7 Fix sanity checks for distinct E factor settings
Reference #13156
6 years ago
Scott Lahteine 64253e1a58 Followup to serial reform
Reference #13250
6 years ago
Minims 92a4984066 Fix G34 probe position (#13251) 6 years ago
Scott Lahteine e15354e387
Simplify serial port redirect (#13234) 6 years ago
Chris Pepper 88cc1d1a31
Fix Preprocessor syntax in Re-ARM pins file (#13247) 6 years ago
Karl Andersson 76e9ee33aa Fix include order to make SERIAL_PORT_2 work (#13241) 6 years ago
Bruce j Beare 562f2321d2 Fix a G34 bug, allow negative Z corrections (#13240) 6 years ago
FernandoVelcic edf025ed8d Update Spanish language (#13236) 6 years ago
Scott Lahteine 02fec89a0d Turn fans off in zero_fan_speeds
Addressing #13231
6 years ago
Scott Lahteine 15aa932aa6
HAL for Linux (#13146) 6 years ago
kwalters3 5eb82ca6a8 Change SSD1306_OLED_I2C_CONTROLLER to HAS_SSD1306_OLED_I2C (#13223) 6 years ago
Marcio Teixeira 109e67169c Define G21 as NOOP w/o INCH_MODE_SUPPORT (#13229)
Ticket #13228

If `INCH_MODE_SUPPORT` is undefined, G20 is an unknown command as it should be (Marlin is, by default, operating in metric mode). G21, however, is found in many slicers and printer start gcode sections and should be accepted (as a NOOP) to avoid the unknown commands.
6 years ago
AnHardt 31b0be74af Fix autotemp_factor menu setting (#13226)
Fix #12643
Only factors above 1 can have a 'positive' effect.
6 years ago
Evgeny-SPB f6ab62bc13 Fix Creality CR-10 S5 filament change (#13219) 6 years ago
Thomas Moore 9f5e4e5ad8 Update LPC1769 Pins Files (#13183) 6 years ago
Greg Nutt 608a6810e7 Fix DOGLCD_A0 pin in pins_Smoothieboard.h (#13217) 6 years ago
Scott Lahteine 80359c9937 Add more parameters to M240
Co-Authored-By: shitcreek <45380455+shitcreek@users.noreply.github.com>
6 years ago
Scott Lahteine a43e892fb5 Use 8-bit i2c address on LPC platform
Fix #9799 — hopefully not a unicorn
6 years ago
Scott Lahteine 631d867dc9 HAL cleanups 6 years ago
Scott Lahteine 89bbc30a09 Fix init of power supply pin
Fix #13184
6 years ago
Scott Lahteine 44c22e3935 Provide a default MAX6675_SS_PIN for ReARM
See #8010
6 years ago
Scott Lahteine 3c9a7926c2 Fix compile error with JUNCTION_DEVIATION
See #13000
6 years ago
Scott Lahteine 758c6c9464 Very minor SPI speedup 6 years ago
Scott Lahteine 422dd6666e Fix Due EEPROM write bug
See #13065
6 years ago
Scott Lahteine 03e109c4a3 FLASH_EEPROM => FLASH_EEPROM_EMULATION 6 years ago
Scott Lahteine 50917ccda6 Tweak some u8g interface code 6 years ago
LinFor ba39186364 TMC_DEBUG optimization and improvements (#13135) 6 years ago
Scott Lahteine 1424b368cf Tweak M122 comment in configs 6 years ago
Scott Lahteine 3a1b6fe8c1 Coding standards 6 years ago
InsanityAutomation 19af90face Fix a host action compile error (#13208) 6 years ago
Marcio Teixeira 992cdc8d14 Fix host action / G-code ordering in event_probe_failure (#13207)
Observing from the console, it makes the most sense to do `//action:probe_retry` before executing commands.
6 years ago
InsanityAutomation 33a6d52965 Fix a RAPTOR2 pin conflict (#13205) 6 years ago
InsanityAutomation 52665f54ad Fix bad Purge More logic (#13193) 6 years ago
Scott Lahteine 18458ec42b Error in Smoothieboard for unsupported display 6 years ago
InsanityAutomation d4ed9b3ef1 Babystep also requires homing (#13191) 6 years ago
InsanityAutomation ca7b2f574f Fix condition on tool change filament swap menu (#13190) 6 years ago
Roman Moravčík 208ab8b366 Fix compilation with one service interval (#13185) 6 years ago
Roman Moravčík 567d03a269 Update Slovak language (#13187) 6 years ago
Alain Martel 27203c62b8 Enable M240, set photo pins for 3DFabXYZ i3 (#13174) 6 years ago
Evgeny-SPB 3025ddf179 Support for Creality CR-10 5S (#13173) 6 years ago
Scott Lahteine e00aad84af Add M240 parameters D I J R S 6 years ago
Marcio Teixeira 31c240a8db Enhancements to G425 (#13159)
- Turn off bed leveling prior to calibrating.
    - This prevents lateral probes from having a Z component that
      triggers the Z endstop and causes the motion to be aborted.
- Got rid of static const float arrays "dimension" and "true_center"
    - Frees up 24 bytes of SRAM
- Changed incorrect use of "bool" for float in backlash macros.
    - Replaced arguments with 0.0f and 1.0f for clarity.
- Now only disables soft endstops (since calibration cube is outside of bed)
    - Not necessary to disable global endstops
6 years ago
Andy Shaw 84fc400aba Update BIQU SKR V1.1 pins, add TMC2130 settings (#13166)
* Remove untested displays add TMC2130 configs.
* Remove references to the ReARM, delete untested displays. Add TMC2130 settings. Cleanup spacing, etc.
6 years ago
Scott Lahteine ab2816c870 Patch for M240 6 years ago
Scott Lahteine d2bdb71c13
Add PHOTO_GCODE option, photo trigger physical move (#13168) 6 years ago
Scott Lahteine be9a409980 Fix M125 XY parameters, export get_homing_bump_feedrate 6 years ago
Scott Lahteine ce40c2e87c Use do_blocking_move_to(ref, fr) 6 years ago
Giuliano Zaro bdc2f10b90 Update Italian language, fix unused var warning (#13164) 6 years ago
Marcio Teixeira 9f0e1834ec Followup to #13039 (#13163)
- Fix compile error when accessing `process_subcommands_now_P`.
- Use `const` var eliminating double-negative (to make code more understandable).
6 years ago
Ludy 1ace97e946 [2.0.x] Update German language (#13150) 6 years ago
Scott Lahteine 7cf9b93f26 Add HAS_FILAMENT_SENSOR ahead of 12962 6 years ago
Giuliano Zaro 2c8d12d3ec Update Italian language (#13148) 6 years ago
Scott Lahteine c2b90c44e4 Prettify some code comments 6 years ago
Scott Lahteine a0dadc8c62 Smaller I2CPositionEncoder strings 6 years ago
Scott Lahteine 18996d2595 Fix some spelling 6 years ago
revilor e56c13670d Service interval watchdog (#13105) 6 years ago
InsanityAutomation 7f1b69b0c8 Add HOST_PROMPT_SUPPORT (#13039) 6 years ago
Scott Lahteine 0feeef2604 Update copyright in headers 6 years ago
Scott Lahteine 894f5c24a8 Fix trailing whitespace 6 years ago
Roman Moravčík bace52afd7 Fixed compilation with MMU2_MENUS disabled (#13140) 6 years ago
Ludy 584f9cd449 Update German language (#13137) 6 years ago
Scott Lahteine d9a3fea022 Comments in HAL_spi_STM32F1.cpp 6 years ago
Giuliano Zaro 773fa5c40f Fix define used when PID is off (#13119)
Replaced `PID_MAX` with `BANG_MAX` since it should be the correct define to be used when PID is not enabled.
6 years ago
Giuliano Zaro f7efe6f6c5 [2.0.x] Fix TEMP_STAT_LED startup init (#13120) 6 years ago
Ludy 2bd6ce4b62 Update German language (#13125) 6 years ago
Giuliano Zaro 27115ff7eb Update Italian language (#13123)
Incomplete.
6 years ago
Roman Moravčík 08a8bd10ca Updated Slovak translation (#13122) 6 years ago
Scott Lahteine 3e2a4c3b26 Show mixer and temperature menus while printing 6 years ago
Scott Lahteine 8d271f20fe
C10mini E steps of 95
See https://www.patreon.com/posts/creality-cr10-24602624
6 years ago
Scott Lahteine 9737608f0a Enable gradient when alias is cleared 6 years ago
Simon Jouet 5cd0fa3ce1 Basic GPIO expander using the ESP32 I2S peripheral (#12959) 6 years ago
Scott Lahteine 3983cacbcf No extern needed for func decl 6 years ago
Scott Lahteine 43b29c093b Update pinsDebug_list.h with XY PWM pins 6 years ago
Scott Lahteine 166e567ab8 Fix HAS_MOTOR_CURRENT_PWM 6 years ago
Scott Lahteine 6de3d34378
M166 Gradients, LCD Menu for 2-channel Mixer (Geeetech A10M/A20M) (#13022) 6 years ago
LinFor 7ee35c2611 PID_MENU option to save PROGMEM in LCD menus (#13095) 6 years ago
Ludy 936f982392 Update German Language (#13110) 6 years ago
AnHardt 0e37fe8776 Apply minimum C in M303 (#13113)
Apply minimum `C` in `M303`. `PID_autotune()` needs to be called with a 'C'ycles-parameter >2 to give meaningful (different from 0) PID-factors. Therefore silently raise C to 3. Fixing one aspect of #13104
6 years ago
Scott Lahteine fcb16ceb29 Update default config 6 years ago
Alain Martel 9ae7cca5e9 Disable RGB_LED for 3DFabXYZ (#13097) 6 years ago
Scott Lahteine f3b6cb4d34 Clean up, update config comments 6 years ago
Scott Lahteine ae03753ef1 Fix PCA9533 with PRINTER_EVENT_LEDS 6 years ago
Scott Lahteine 95d3f3953a DEFAULT_WEBSITE_URL => BOARD_WEBSITE_URL 6 years ago
Scott Lahteine 6ddd81c178
[2.0.x] Update German Language (#13100)
add MMU2
6 years ago
Giuliano Zaro 7c9ff322f3 Update Italian language (#13099) 6 years ago
Ludy ce8cb6a5d9 [2.0.x] Update German Language
add MMU2
6 years ago
Scott Lahteine f269766408 Put the MMU2 menu with the others 6 years ago
Marcio Teixeira e1604198ff G425 — Auto-calibrate Backlash and Nozzle Offsets (#13050) 6 years ago
Marcio Teixeira 113af46a1b Add ExtUI methods to babystep probe/nozzle offsets (#12590) 6 years ago
InsanityAutomation 413e303ad5 More Advanced Pause options (#12984) 6 years ago
Mark Zachmann 19cf72e057 Support individual solenoid disable with M381 (#13008) 6 years ago
teemuatlut d81342254a Support new TMC drivers (#13026) 6 years ago
Scott Lahteine e1587da228
Clean up HAL_spi_Due.cpp (#13087) 6 years ago
Rolf Werum 524c6c10bf MAGNETIC_PARKING_EXTRUDER (#12351) 6 years ago
Scott Lahteine 1bd9a63049 Add HAS_EXTRA_ENDSTOPS macro 6 years ago
Scott Lahteine 3c49396370
Fix compile error with DUE + MAX6675 (#13086) 6 years ago
Roxy-3D ab6908a513
Fix Probe Offset bug... 6 years ago
revilor 69aaf5d096 MMU2 fixes (#13082) 6 years ago
Scott Lahteine 2f8e89adc3 Remove extraneous ui. prefixes 6 years ago
Scott Lahteine 870757aa17 Tweaks to pins_GT2560_V3.h 6 years ago
Scott Lahteine b96cc30cd0 HAL spacing tweak 6 years ago
Scott Lahteine 9e394139e5 Followup to 90911104 6 years ago
Sam Lane b35a7c2c87 Fixed closed-loop planner stall (#13005) 6 years ago
Ludy 691e925adc Update German language (#13012) 6 years ago
Scott Lahteine 1497fb388a
M29 match logic was reversed (#13013)
* M29 logic was reversed 

If in card-saving mode generate errors line errors for anything that's *NOT* "M29 ?"

* Update queue.cpp

* Update queue.cpp
6 years ago
Scott Lahteine b5fd2fb58b Allow M29 to be processed late 6 years ago
Scott Lahteine c03bac9ad4
Update queue.cpp 6 years ago
Scott Lahteine a49f0205ea
Update queue.cpp 6 years ago
Andy Shaw 9091110460 LPC1768 - Don't change CS pin state (#13015) 6 years ago
Scott Lahteine 10d855cb21 Sanity check USER_GCODE formatting 6 years ago
Scott Lahteine d97bb4c41c Followup to e10943d0 6 years ago
jeffstaley 2f176d6fb8 Flush RX buffer on G-code line errors to prevent hang (#13018) 6 years ago
Scott Lahteine ca73b2f465 Add static assert to catch errors in COPY(a,b) 6 years ago
Nathan df1043516e Fix the delta homing issue (#12974) 6 years ago
Scott Lahteine 4200bd2fc1
Report on M92 with no arguments (#12833) 6 years ago
Scott Lahteine e10943d0d8 Minor tweak to main menu 6 years ago
Scott Lahteine d4d1b28a06 Fix some include paths 6 years ago
Scott Lahteine 0d720a6ff4 Tweak to emergency_parser.h 6 years ago
Scott Lahteine 0a7ea7063f Hide Resume Print when not relevant 6 years ago
Scott Lahteine afe79ba22b Minor code cleanup 6 years ago
Scott Lahteine fdb97a3e9c Add class and macro to save and auto-restore a variable 6 years ago
Scott Lahteine 433518de74 Prevent M420 error from disconnecting OctoPrint
Just echo the error instead of labeling it `Error:`.
6 years ago
Marcio Teixeira 5cfc1cdacc Support SWITCHING_NOZZLE with 2 servos (#13054) 6 years ago
Psycho 3c88cac2e9 Velleman Vertex Delta pins (#13072) 6 years ago
Nicolas G 6fb4001b58 Add option to disable fan speed slowing in M303 (#13066) 6 years ago
Scott Lahteine ca1be02bf0 Tweak some pins formatting 6 years ago
Scott Lahteine 38c2ca9281 Clean up trailing whitespace 6 years ago
Mark Zachmann 4d1093b386 Fix init of last_direction_bits (#13067) 6 years ago
Scott Lahteine 4fa1c52688 Tweak serial output code 6 years ago
Scott Lahteine a5e3384691 Pre-apply cosmetic changes to mixing 6 years ago
Scott Lahteine 0358ffcd4c Drop E element from `homing_feedrate_mm_s` 6 years ago
Scott Lahteine 95223cb28e Remove dead code from stepper.h
These values are always supplied by `Conditionals_post.h`.
6 years ago
mattfredwill c3cb449990 TMC2130 dual-stepper Sensorless Homing (#13061) 6 years ago
Marcio Teixeira f6edd2c472 Move stepper settings to "Advanced Settings" menu (#13063) 6 years ago
InsanityAutomation 68bbac207e Update pins_FORMBOT_TREX3.h (#13058) 6 years ago
revilor 6a57d0b381 Prusa MMU2 (#12967) 6 years ago
Scott Lahteine 996f7d1642 Fix I2C_POSITION_ENCODERS commentary 6 years ago
raTmole 988b5aa4e6 Update GT2560 V3 pins (#13036) 6 years ago
InsanityAutomation 7d927b6691 Move Z Probe Z Offset from Advanced to basic Configuration (#13056) 6 years ago
Giuliano Zaro 31e213e427 Always show Tune sub-menu (#13049) 6 years ago
teemuatlut f0503372d9 Revert E_AXIS_N cast (#13055) 6 years ago
InsanityAutomation a1d03fe7ba Fix single nozzle fan (#13038) 6 years ago
Scott Lahteine 159d7eefda New boards entry for the A20M 6 years ago
Scott Lahteine 97da6c1da5 Use MIN/MAX for min/max 6 years ago
Scott Lahteine 17a8c37148 Label menu edit items 6 years ago
raTmole ddeca7a358 Fix resume from power loss G-Code. (#13035) 6 years ago
Thomas Moore 02ab66fca3 Update Cohesion3D Pins Files (#13027) 6 years ago
Giuliano Zaro a79d80c78e Minor cleanup of pause code (#13030) 6 years ago
jeffstaley 0da636e1a3 Set correct stepper direction on reset (#13032)
On a reset steppers were being initialized to incorrect direction. Original code wasn't respecting `INVERT_Z_DIR` define.
6 years ago
Scott Lahteine 3845baf398 Followup to #12982 6 years ago
InsanityAutomation 48a3502656 Remote streamer improvements (#12982) 6 years ago
Scott Lahteine 621fbe99de Followup to #12817 6 years ago
Marcio Teixeira f214118e45 Action to notify host of filament runout. (#12817) 6 years ago
Scott Lahteine aad770bce8 Bring default configs in sync 6 years ago
jeffstaley 3f91233f6d
M29 logic was reversed
If in card-saving mode generate errors line errors for anything that's *NOT* "M29 ?"
6 years ago
jeffstaley 0e0cc13650 Fix M29 for Pronterface SD card upload (#13010) 6 years ago
Jiri 24fffb8d93 Fix undefined lcd_tmpfan_speed on NO_LCD_MENUS (#13006) 6 years ago
Scott Lahteine 8f9b246d0e Tweak some formatting, replace tabs 6 years ago
Bo Herrmannsen 808df82b36 Support for Anycubic I3 (#12972) 6 years ago
Scott Lahteine ae91914260 Prevent name conflicts with mixed stepper drivers 6 years ago
Scott Lahteine 0eca236dcd Fix L6470 config comments 6 years ago
InsanityAutomation f4d1f13358 Warn on cold extrusion, dont error 6 years ago
Scott Lahteine aa74a900f5 Bring Rostock 301 and ArmEd configs up to date 6 years ago
Scott Lahteine 0f07ba4f09 Tweak some comments 6 years ago
Scott Lahteine 00cdd41b5f Clean up for recent changes 6 years ago
Roman Moravčík 7d53b79596 Update Slovak translation (#12991) 6 years ago
Giuliano Zaro 18c32996c1 [2.0.x] Updated Italian language (#12997) 6 years ago
Bob Kuhn 7c1a5e3c47 Fix TEMP_TIMER in pins_STEVAL.h (#12994) 6 years ago
Scott Lahteine b4994ad12e Update language_it.h 6 years ago
Bob Kuhn 2f35747f29 L6470 SPI daisy chain support (#12895) 6 years ago
Scott Lahteine 6453b82a5e Clean up trailing whitespace 6 years ago
Scott Lahteine 48a581ba2e Tweak some HAL Due code 6 years ago
Marcio Teixeira 54fdf57b8c ExtUI: Fix fan wrapping around from 0 to 100 (#12987) 6 years ago
InsanityAutomation dbe4126e07 Update language_en.h (#12988) 6 years ago
teemuatlut e5801b75f8 Fix TMC-related compile issues. (#12971)
- `STEALTHOP_[XYZE]` configuration options now set the default state.
6 years ago
Gert-Jan Rodenburg bb30927549 Fix pins for ZONESTAR_LCD with Zonestar ZRIB (#12956) 6 years ago
Ludy dc65d96aca Fix TMC compile error (#12965) 6 years ago
InsanityAutomation a1cf49935d Add laser control menu (#12883) 6 years ago
InsanityAutomation 75f2665f2e LCD SD Card items near top when not using wheel (#12926) 6 years ago
Scott Lahteine e1f951813a Remove old block end comment 6 years ago
Scott Lahteine 52108192d1 Prevent L6470 class name conflict with drivers.h define
Fix #12824
6 years ago
Scott Lahteine 0495fcd475 Minor spacing fix 6 years ago
lanserge c2cf8ffa82 Add support for Arduino DUE Shield Kit (#12950) 6 years ago
Scott Lahteine a5911765c3 Tweak some spacing 6 years ago
chrisly42 99e5e8362f Rapide Lite 200 config, pins_RL200 RUMBA clone (#12848) 6 years ago
Scott Lahteine 6411680364 Update some pins spacing 6 years ago
teemuatlut 8a3f1d6932 Fix chopper timing struct and initialization (#12943) 6 years ago
Ludy c6991109b7 Update German language (#12953) 6 years ago
Giuliano Zaro ca9eb14f6a Update Italian language (#12951) 6 years ago
Ludy acf266fe78 Fix a compile warning, etc. (#12955) 6 years ago
Scott Lahteine 424aa05cc2 Fix some file endings 6 years ago
Scott Lahteine ce563d7c2e Various general cleanups
Mostly from the L6470-oriented PR
6 years ago
Scott Lahteine 02cc63d6d4 Update CreatorPro Configuration_adv.h 6 years ago
Marcio Teixeira f4c16e683b Follow up fixes to #12884 (#12940) 6 years ago
Scott Lahteine 712e23c383 Fix up some whitespace 6 years ago
Ziemowit 20c20dacb7 MKS SBASE needs DRV8825 (#12911) 6 years ago
Giuliano Zaro 7bb5d4bfe8 Small LED code reorganization (#12929) 6 years ago
teemuatlut e6805582a6 M569 to change stepping mode. Add new TMC section to LCD. (#12884) 6 years ago
Bob Kuhn d08f27e27b Add support for STEVAL 3DP001V1 (#12894) 6 years ago
Alain Martel cdb562d558 Bring Migbot config up to date (#12916) 6 years ago
Giuliano Zaro 8f4c6e6d1a Fix case light on boot (#12919) 6 years ago
Marcio Teixeira f11c6d5d02 Fix M107 when dual-nozzles share fan (#12819) (#12909) 6 years ago
Karl Andersson 64a4649290 STM32 - Fix SD write (#12897) 6 years ago