49cf92dc36
Extended condition macros ( #13419 )
...
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
6 years ago
ad8b82d054
Fix KILL_PIN assignment for MKS_MINI_12864
...
According to #13397
6 years ago
4555ae448f
Fixups for ESP32
6 years ago
fa11427ec6
Remove obsolete LCD_CONTRAST
6 years ago
00fc43144a
Follow up fixes to various PRs. ( #13334 )
...
- Ensure `MarlinUI:get_progress` is defined for `ExtUI`.
- Fix for `BACKLASH_SMOOTHING` with small segments.
`BACKLASH_SMOOTHING` with extremely small segments failed to fully correct due to the correction factor being rounded down. Rounding up ensures the entire backlash will converge to zero even for small segments.
- Add pinout for the beta revision `EINSY_RETRO`.
- Update soft endstops with tool offsets (for toolchange et. al. move clamping) (#12568 )
6 years ago
44571775bd
Further support for 6 extruders
6 years ago
893ee68b52
Clean up trailing whitespace
6 years ago
56fdcf93d1
Disallow SD_DETECT_INVERTED with FYSETC F6. ( #13307 )
6 years ago
d71dc5cf42
Fix for Ender 4 fan/case light pin
...
See #12731
6 years ago
7640b328df
Support for Tronxy X5S 2e ( #13297 )
6 years ago
fa0d909dd3
Add FIL_RUNOUT_PIN for BIGTREE_SKR_V1.3
...
See #13267
6 years ago
71773b128d
Fix stepper use before init. Add Ultimaker2+ Extended clone config ( #13284 )
6 years ago
2f1e1dcb42
Gradual step towards EXTRUDERS 0 support
6 years ago
99d0022fae
Drop the Z_MIN_PROBE_ENDSTOP option ( #13276 )
6 years ago
5b7ad3a5a0
Fix SKR onboard TF card CS pin ( #13272 )
6 years ago
f8a39919fa
Add Bigtree SKR 1.3 board ( #13267 )
...
Co-Authored-By: Msq001 <msq001@users.noreply.github.com>
6 years ago
ddbe4cfa20
Printrboard G2 support ( #13116 )
6 years ago
a79b9bbe6b
Cleanup whitespace, add a const
6 years ago
88cc1d1a31
Fix Preprocessor syntax in Re-ARM pins file ( #13247 )
6 years ago
15aa932aa6
HAL for Linux ( #13146 )
6 years ago
5eb82ca6a8
Change SSD1306_OLED_I2C_CONTROLLER to HAS_SSD1306_OLED_I2C ( #13223 )
6 years ago
9f5e4e5ad8
Update LPC1769 Pins Files ( #13183 )
6 years ago
608a6810e7
Fix DOGLCD_A0 pin in pins_Smoothieboard.h ( #13217 )
6 years ago
44c22e3935
Provide a default MAX6675_SS_PIN for ReARM
...
See #8010
6 years ago
33a6d52965
Fix a RAPTOR2 pin conflict ( #13205 )
6 years ago
18458ec42b
Error in Smoothieboard for unsupported display
6 years ago
84fc400aba
Update BIQU SKR V1.1 pins, add TMC2130 settings ( #13166 )
...
* Remove untested displays add TMC2130 configs.
* Remove references to the ReARM, delete untested displays. Add TMC2130 settings. Cleanup spacing, etc.
6 years ago
7cf9b93f26
Add HAS_FILAMENT_SENSOR ahead of 12962
6 years ago
0feeef2604
Update copyright in headers
6 years ago
5cd0fa3ce1
Basic GPIO expander using the ESP32 I2S peripheral ( #12959 )
6 years ago
43b29c093b
Update pinsDebug_list.h with XY PWM pins
6 years ago
95d3f3953a
DEFAULT_WEBSITE_URL => BOARD_WEBSITE_URL
6 years ago
870757aa17
Tweaks to pins_GT2560_V3.h
6 years ago
3c88cac2e9
Velleman Vertex Delta pins ( #13072 )
6 years ago
ca1be02bf0
Tweak some pins formatting
6 years ago
68bbac207e
Update pins_FORMBOT_TREX3.h ( #13058 )
6 years ago
988b5aa4e6
Update GT2560 V3 pins ( #13036 )
6 years ago
159d7eefda
New boards entry for the A20M
6 years ago
02ab66fca3
Update Cohesion3D Pins Files ( #13027 )
6 years ago
0f07ba4f09
Tweak some comments
6 years ago
7c1a5e3c47
Fix TEMP_TIMER in pins_STEVAL.h ( #12994 )
6 years ago
2f35747f29
L6470 SPI daisy chain support ( #12895 )
6 years ago
6453b82a5e
Clean up trailing whitespace
6 years ago
bb30927549
Fix pins for ZONESTAR_LCD with Zonestar ZRIB ( #12956 )
6 years ago
c2cf8ffa82
Add support for Arduino DUE Shield Kit ( #12950 )
6 years ago
99e5e8362f
Rapide Lite 200 config, pins_RL200 RUMBA clone ( #12848 )
6 years ago
6411680364
Update some pins spacing
6 years ago
712e23c383
Fix up some whitespace
6 years ago
d08f27e27b
Add support for STEVAL 3DP001V1 ( #12894 )
6 years ago
7fde8d9d1e
Add CreatorPro / Makerbot / QIDI / etc and Mightboard RevE support ( #12855 )
...
- Fix a bug in MAXxxxx thermocouple temp reporting.
- Add support for 3-wire HD44780.
- Add support for PCA9533 RGB driver.
- Add configuration examples for FlashForge CreatorPro.
6 years ago
1d33784bf9
Add RUMBA32 Board ( #12856 )
6 years ago
8ae6f1e556
Fix errors and some compiler warnings with HAL_STM32 PlatformIO build ( #12869 )
6 years ago
d372e7e477
SDIO support for STM32F1 ( #12782 )
6 years ago
7f244f9b9c
Update LPC SD pins for BIQU SKR ( #12767 )
...
(Exactly matching the Azteeg X5 MINI Wifi)
6 years ago
813a4ea107
Add support for Mks Robin TFT display ( #12706 )
...
* Add support for MKS Robin TFT display
- Add support for MKS Robin TFT display and encoder for MKS Robin board.
- Generic 128x64 UI with x2 upscale is used (for now).
- Tested on MKS Robin TFT V2.0 with ST7789V controller.
6 years ago
2aaa681dea
Remove unused Cheaptronic pins
6 years ago
74c47803f7
Add VORON printer ( #12705 )
6 years ago
d9cf5e4883
Update pins_BIQU_SKR_V1.1.h ( #12758 )
6 years ago
371d9a1acf
Fix line-endings, formatting, whitespace
...
Followup to #12770
6 years ago
44ed34475b
Add MKS BASE 1.4 pins ( #12770 )
6 years ago
f8c5d31864
Bugfix 2.0.x add motherboard pins define ( #12689 )
...
- `pins_BIQU_B300_V1.0.h` defines pins for B300, as found in the BIQU Thunder 3D printer.
- `pins_BIQU_SKR_V1.1.h` defines pins for bigtree/BIQU SKR V1.1 motherboard.
6 years ago
b7a8dcc35d
Update Formbot T-Rex 3 pins ( #12662 )
6 years ago
f7127c44f8
Wanhao Duplicator i3 Plus pins create ( #12701 )
6 years ago
33abb86b7e
Add support for MKS Robin board ( #12650 )
...
Implement initial support for MKS Robin (STM32F103ZET6) board.
Custom build script is used to generate encrypted firmware compatible with original MSK Robin bootloader (i.e. safe firmware update from SD card and possibility to go back to original close-source firmware).
6 years ago
33f3c75213
GTM32 Pro VB FAN-PIN correction ( #12666 )
6 years ago
3829d6ccf8
FYSETC F6 13 - E2_SERIAL_TX_PIN correction ( #12667 )
6 years ago
d35dcafa3d
Added MKS MINI 12864 support to FYSETC F6 V1.3 ( #12656 )
6 years ago
97de9d54a5
Fix broken pins file include ( #12617 )
6 years ago
6cf8d40f41
Fix some serial echos of pin states
6 years ago
7d15854514
Add Z_MIN_PROBE_PIN to MKS SBASE pins
6 years ago
50b2fbd031
Trinamic: Split stealthChop, improve driver monitoring, etc. ( #12582 )
6 years ago
3c58b16c9f
Move stepper enable/disable to stepper_indirection.h ( #12562 )
6 years ago
c986239837
A single SERIAL_ECHO macro type ( #12557 )
6 years ago
dec721c52b
Add Formbot Raptor2 and Raise3D pins ( #12532 )
...
* Add Formbot Raptor2 board
* Add Raise3D Rumba board
6 years ago
0a638cc022
Adjust Formbot Raptor pins
6 years ago
7109dadd21
Additional pin definitions for Archim 2 ( #12500 )
...
- Added GPIO pins to Archim 2
- Added new 108 pin to `fastio_Due.h`
6 years ago
b738972e69
General cleanup of Re-ARM pins
6 years ago
1f93d2bcf7
Fix LCD compile error, etc. ( #12472 )
6 years ago
9d13f07d09
GTM32 Pro VB changes from Markku Sinisalo
6 years ago
779b2709ec
Change temperature pin order for RemRam V1 ( #12458 )
...
Beta testers suggested to adopt the RAMPS order of temperature probe connectors. This commit fixes the order to the RAMPS order.
6 years ago
984c4ba8c7
Enable SD Card on RepRap Display and RADDS ( #12446 )
...
* Enable SD Card on RepRap Display and RADDS
Define the necessary pins in `pins_RADDS.h` (copied from the `RADDS_DISPLAY` section) for the use of the SD card slot on RRD.
6 years ago
ca21ac6b9b
Support two MAX6675 thermocouples ( #8686 )
6 years ago
edfd106bc5
Rejigger Filament Runout class ( #12428 )
6 years ago
f4c128ecaa
Move RRW keypad code to a common method ( #12429 )
6 years ago
ebf585b673
Fix an old sanity check
6 years ago
052d102ded
UltiMachine Archim 1 support ( #12404 )
6 years ago
664e20754d
Clean up pins files
6 years ago
4ed6397e5d
More comprehensive NO_LCD_MENUS ( #12367 )
6 years ago
9c8f083d6c
Extend pins errors to include the processor
6 years ago
147e270208
Restore GTM32_PRO_VB temp and heater pins
...
Undo #12345
6 years ago
a813900fce
Add Geeetech Rostock 301 config, update GTM32 Pro VB pins ( #12345 )
6 years ago
c536ee1122
Clean up bq Zum Mega 3D pins
6 years ago
0c85869c26
Clean up file endings
6 years ago
3c21483c88
Provide DOGLCD SPI pins for MKS SBASE + VIKI
6 years ago
9c0e05552e
Suppress some compile warnings
6 years ago
176654791e
Use board-specific or platform SPI pins in HAL_STM32 ( #12323 )
6 years ago
608be966d7
Add servos to pins_FYSTEC_F6_13.h
6 years ago
ad60f0691c
Add Creality3D RAMPS pins definitions ( #12229 )
6 years ago
5580773191
Use FastIO, sanity-check LPC SD options, apply formatting ( #12231 )
6 years ago
6ee2af5e2d
Simplify pins_TRIGORILLA_14.h ( #12162 )
6 years ago
b381cad399
Clean up trailing whitespace
6 years ago
4eb798dbdc
Add support for Arm'ed (STM32F4) board ( #12147 )
6 years ago
a81763c237
Pins E sanity check tweak
6 years ago
eded90bf87
Updated Azteeg X5 Mini Wifi pins for onboard SD ( #12133 )
6 years ago
3c13c9e3e9
[LPC176x] Fix USEABLE_HARDWARE_PWM macro, cleanup multiple LED support ( #12129 )
6 years ago
0519ef0802
Update pins for final RemRam v1.3 board ( #12125 )
6 years ago
8b5e51c9aa
STM32F4xx modifications for HAL_STM32 ( #12080 )
6 years ago
42fb7c14b0
Update the sdcard usb sharing config and apply to Re-ARM
6 years ago
870bfd08f5
usb and sdcard sharing improvements
...
* Add traceback after watchdog timeout
Add the cpability to perform a traceback following a watchdog timeout.
* Enhanced hardware SPI
Allow use of either SSP0 or SSP1.
Ensure that no data is left in I/O buffers after calls to enable sharing of SSP hardware.
* Make flash emulation of eeprom the default
Make use of flash for eeprom storage the default. This means that usage of eeprom will not cause USB drive mount/unmount operations.
* Allow sharing of SD card
SD card I/O operations from the USB stack take place in idle loop, rather than at interrupt time. Allowing sharing of the SPI bus.
New configuration options to allow usage of the SD card to be specified.
* Fix problem with hardware SPI pins
6 years ago
25b980dddb
Remove erroneous Pin 12 definition
...
There is no switchable Power Supply. Don't put it on Pin 12.
(Pin 12 is actually FAN1)
6 years ago
1407afad73
Move SENSITIVE_PINS to its own file
6 years ago
45e738876a
Add stepper MS3 support
...
Co-Authored-By: TheLongAndOnly <thelongandonly@users.noreply.github.com>
6 years ago
a3e8cb1e44
[2.0.x] Ender-4 small improvements in Configuration ( #11843 )
6 years ago
ec9aa4f468
[2.0.x] Miscellaneous fixes ( #12039 )
...
* Allow override of soft SPI pins in `pins_*.h`
* Add default case to avoid compiler warning.
* Additional pin definitions for Archim 2.
* Einsy Retro has same timings as Einsy Rambo.
6 years ago
906a24fa81
Extensible user interface API ( #11193 )
6 years ago
c447d75916
Add support for TMC2660 ( #11998 )
6 years ago
0fcdfdeed6
Followup to #12017
6 years ago
acac2adfc8
Add support for MeCreator2 ( #12017 )
6 years ago
1358bd9319
Make MAX_EXTRUDERS always 6
6 years ago
348004c34f
STM32F7 HAL using the official STM32 Arduino Core ( #11750 )
6 years ago
11ac75edcb
Use PGM_P for PSTR pointers ( #11977 )
6 years ago
d016b572e3
[2.0.x] Add pin configuration for Fysetc F6 ( #11932 )
6 years ago
eeab4141db
[2.0.x] Anycubic Trigorilla 14 pins tweak ( #11869 )
6 years ago
cb9dc56630
Add GT2560 v3 support ( #11914 )
6 years ago
cee34f7290
Followup for BABYSTEP_HOTEND_Z_OFFSET ( #11916 )
6 years ago
1104054d73
2.0 IDEX Independent z offset and other fixes ( #11862 )
...
* Add Formbot Raptor board
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
* Add a second Z probe Z offset
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
* Modify method to utilize live adjustment of hotend z offset
Should probably move config option to babystepping and rename as it may now apply to all multiextruder systems
* Move config item and catchup other code to current method
6 years ago
140caf99b8
E0_CS_PIN moved from A13 to A15 on RAMPS-FD v2.2 ( #11865 )
6 years ago
09a2bee8aa
Support more filament runout sensors in M119 ( #11851 )
6 years ago
0780913848
IDEX Improvements ( #11848 )
6 years ago
1718eff54a
Code changes supporting up to 6 extruders
6 years ago
d948c6e867
RADDS Extension Board V3 support
6 years ago
1a6f2b29b8
Add support for Triple-Z steppers/endstops
6 years ago
8584d3697d
Fix servo count define conflict
...
`MAX_SERVOS` => `NUM_SERVO_PLUGS`
6 years ago
fe9f088d60
[2.0.x] Anycubic LinearPlus, Trigorilla 1.4 ( #11730 )
6 years ago
b6aae2b322
Tweak RAMPS_FD_V1 pins
6 years ago
7391e23332
Fix RigidBoard FAN_PIN collision
6 years ago
e3aac59637
Create pins_FORMBOT_TREX3.h
6 years ago
f580247581
Create pins_FORMBOT_TREX2.h
6 years ago
073857646b
seperate the T-Rex2 and T-Rex3 support
6 years ago
fe4fc2883b
Add support for Formbot T-Rex3
6 years ago
9651ceb36b
Correct spelling of #endif
6 years ago
86ee74731e
Comment for RADDS + RRDFGSC
6 years ago
ae1271b2ae
RADDS: Update Full Graphic Display Pins ( #11731 )
6 years ago
d62f4df0b7
Disable LCD Pins used by new Max7219 hook up if in that mode
6 years ago
8e18e48d49
Merge pull request #11610 from Freeviv/bugfix-2.0.x
...
[2.0.x] Editable servo angles
6 years ago
18f1af2dca
Fix up Teensy tests, servo sanity
6 years ago
74a04aed55
Fix compile error with NO_LCD_MENUS
6 years ago
3e81745e81
Fix issues, make optional
6 years ago
7ecb8b4af5
[2.0.x] Teensy 3.1 and 3.2 support ( #11460 )
6 years ago
409a0632af
[2.0.x] Add Morpheus Board support ( #11651 )
6 years ago
b71c2b8651
[2.0.x] Update LPC176x tests, fix clean script ( #11617 )
6 years ago
acf5ae3083
!ENABLED => DISABLED
6 years ago
f8c52c9c29
Azteeg X5 Mini WiFi support ( #11601 )
6 years ago
97f6396b25
Fix RE_ARM LCD pins to avoid #undef
6 years ago
0e25f66c09
Fix Ultimaker servo pin
...
As pointed out at https://github.com/MarlinFirmware/Marlin/issues/7981#issuecomment-407116642
6 years ago
ad12b9b46b
Fix indentation, whitespace, spelling, formbot pins...
6 years ago
b5537dde7f
need to add E2END to pins_RAMPS_FD_V2.h ( #11564 )
6 years ago
62ce937540
Update pins.h to include the Formbot board
6 years ago
a82be36d5d
Create pins_FORMBOT.h
6 years ago
6964e1a95a
Clean up trailing whitespace
6 years ago
0bda22367b
Allow Einsy RAMBo FAN1_PIN override
6 years ago
a1a5367380
Smoothieboard V1.0/1.1 and A5984 support
6 years ago
9bae413901
Add Bigtreetech/BIQU KFB 2.0 board ( #11446 )
6 years ago
aae02827c0
Cosmetic pins changes
6 years ago
2cc950d67e
[2.0.x] MKS SBASE Trinamic examples/support ( #11402 )
6 years ago
8a24ff94d1
AT90USB1286 PIO cleanup and optimization ( #11230 )
...
-normalize `env` and `board` to lowercase naming convention.
-make board `name` follow descriptive convention.
-implement `-fsingle-precision-constant` compile optimization per https://github.com/MarlinFirmware/Marlin/pull/11178#issuecomment-401673901
-fix typo in 5DPRINT entry.
7 years ago
094e6d81a5
Add Einstart-S support ( #11219 )
...
Indeed the HAL does not need to be mucked around with to expose ATmega2560 pins not available as numbers on the MEGA board, I'll need to update the wiki with that tidbit and a reference to the pin-mapping comment in `fastio_1280.h`.
7 years ago
67b205fd45
Add support for board RuRAMPS4D v1.3 ( #11363 )
7 years ago
d1c6687ecd
Update MKS sBase pins ( #11357 )
7 years ago
fbcdf5eaeb
Simplify stepper driver per-axis selection
7 years ago
5379c115c8
Fix Trigorilla include typo
7 years ago
cedc158106
[2.0.x] Board specific init macro ( #11170 )
7 years ago
f9a090b2cf
Fix Trigorilla 1.4 pins
...
See #11097
7 years ago
444725ae9a
Non-conflicting CS pins for MKS Gen L
7 years ago
7e802145cc
[2.0.x] Add CR-10 stock display support for Re-Arm (EXP3) ( #11068 )
7 years ago
0312c42f9d
[2.0.x] LPC176x Serial cleanup ( #11032 )
7 years ago
e2aeda61ed
HAL for Espressif ESP32 Wifi
7 years ago
e0276d2f32
Official STMicroelectronics Arduino Core STM32F4 HAL compatibility ( #11006 )
7 years ago
88314b8910
CREALITY_ENDER is long gone
...
As noted in #10965
7 years ago
7ba5afff01
Allow FAN_PIN override, pins cleanup ( #10956 )
7 years ago
e7623b5788
Restore Z_PROBE_PIN to pinsDebug_list.h
7 years ago
c16e41e9e6
STM32F4 pins cleanup
7 years ago
ae322e0c54
[2.0.x] Add GTM32 Pro VB support ( #10898 )
7 years ago
d259070980
Clean up trailing spaces from vim, etc.
7 years ago
c68b7b3913
Update Fan 2 and E0 Auto Fan pins for Trigorilla
7 years ago
bbd09a99f1
32 bit boards classification cleanup ( #10818 )
...
- Ordering and match classification between `boards.h` and `pins.h`
- Check `pins.h` environments
7 years ago
62e2987488
add AT90USB support & add items to popup menu ( #10779 )
7 years ago
c173a31060
Fix some compile warnings
7 years ago
a1062eec5b
Better handling of DELAY_NS and DELAY_US ( #10716 )
...
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
7 years ago
fe5c308872
Correction to Printrboard SDSS pin ( #10677 )
...
Co-Authored-By: Simon Swenson <simon-swenson-8351@users.noreply.github.com>
7 years ago
410b023b50
[2.0.x] Add Viki support to RAMPS_FD_V1 (DUE) ( #10598 )
7 years ago
f973ff49ae
[2.0.x] MKS SBASE - Separate SD_DETECT for LCD and on-board SD cards ( #10557 )
7 years ago
00dfaae8df
[2.0.x] Platformio - automate build & environment selection ( #10503 )
7 years ago
0e450df6a2
MKS OLED support for RUMBA
...
Based on #10519
Co-Authored-By: Alex <alex18881@users.noreply.github.com>
7 years ago
f423e54f77
Strip trailing spaces
7 years ago
10a25f733e
Add SENSORLESS_HOMING to Archim 2.0 ( #10500 )
7 years ago
ad58b626a3
Fix pin mappings for Viki2 on Azteeg X5 GT ( #10487 )
7 years ago
b6747c742a
Cleanup AZTEEG_X5_GT pins for VIKI
...
What should the SD detect and SDSS pins be? Followup soon on #8138
7 years ago
186d71b361
Complete CREALITY_ENDER revert
7 years ago
2be5fe5ddf
Split TRIGORILLA into 1.3 and 1.4
7 years ago
80e29492c6
TRIGORILLA => TRIGORILLA_13
7 years ago
dea686cf55
Define short pin names in fastio for STM32 ( #10461 )
7 years ago
4f184ba5da
[2.0.x] Add BOARD_MKS_BASE_15 with digital micro-stepping ( #10454 )
...
* Add BOARD_MKS_BASE_15 with digital micro-stepping
* Rename MKS_13 to MKS_GEN_13
7 years ago
428c54f2ad
[2.0.x] HAL for STM32F4 ( #10434 )
7 years ago
cc6d41e1d3
Use a macro for HAL header redirection ( #10380 )
7 years ago
472ab0cc24
Tweak RAMPS SDSS pins
7 years ago
b94c8defee
Provide additional information about SMART-RAMPS board ( #10353 )
7 years ago
6f8e228880
Add RESET_PIN to pins_RAMPS_SMART.h
7 years ago
0e8242180d
Chamber temperature monitoring and auto fan control.
...
This is an initial cut for feedback, updated for 2.0.x.
Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?
Chamber temperatures are not reported on the LCD in any way.
When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.
As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
7 years ago
ab715c70d1
TMC SPI sanity-check and pins debugging ( #10324 )
7 years ago
9356cf648f
Added support for Einsy Retro
...
http://reprap.org/wiki/EinsyRetro
7 years ago
f68b4265a6
Fix a probe pin definition
7 years ago
4a23069de9
Fix Ender 4 / CR-8 compilation
...
- Assign 243 (like EFB) as Ender-4/CR-8 board ID
- Add to `Makefile`
- Add to `pins.h`
7 years ago
a9f94f260a
Some RADDS pin updates
7 years ago
d573a2cada
Fix pins_RAMPS.h for 32-bit platforms
...
Followup to 436e5b7
7 years ago
a97624dd81
Allow pinsDebug "Analog in" long int
7 years ago
436e5b7ea3
Apply spacing in pins files
7 years ago
7308ef7809
Add conditional, give DUE SPI a unique name, fix compiler warnings ( #10168 )
7 years ago
c6ff39cc14
Spacing cleanup
7 years ago
9e9e29ddf8
Einsy: Regular endstops and BLTOUCH pins
...
Based on #10131
7 years ago
6689884910
Easier override of ST7920 LCD timing
7 years ago
374ea49be9
Revert marlinAnalogInputToDigitalPin
7 years ago
18de11c1ea
Followup to auto-assign of dual axis CS pins
7 years ago
dd19e74476
Cleanup trailing whitespace
...
@Bob-the-Kuhn — Please set your git options to remove trailing whitespace on commit.
7 years ago
d385b9aac7
Auto-assign CS pins for X2, Y2, Z2 ( #10057 )
...
Fixes #9211
7 years ago
0d8c15c01f
restore PR 9661 files & V1 fix
7 years ago
bf59a4a6df
Revert "[2.0.x] DUE compatibility with shared SPI LCDs, USB mass storage, add pin defs & update examples\MakerParts\Configuration.h"
7 years ago
239902f861
Fix E2END and add EEPROM to Smart RAMPS
...
Reference #9983
7 years ago
914bb80bde
removed SDSS init
...
added device & comm drivers for shared SPI LCDs
mistyped some updates in ultralcd_impl_DOGM.h
remove unwanted changes in onfiguration.h
still can't type
Update HAL_LCD_class_defines.h
include USB mass storage & misc
7 years ago
6d7f4f84e2
Add board MKS_BASE_HEROIC ( #9926 )
...
Followup to #9008
- Don't define micro-stepping pins for boards that lack them.
- Allow setting of 128 microsteps with `M350`.
7 years ago
e2df286444
Update pinsDebug.h ( #9874 )
...
Fix display of analog input value.
7 years ago
c1f4112bdc
[2.0.x] Add 1284 support & misc. bug fixes ( #9864 )
7 years ago
c471389afb
Add Einsy Rambo pins ( #9850 )
7 years ago
461cb22069
Fix Zonestar / ADC keypad with RAMPS. ( #9840 )
7 years ago
0bc4c216ac
Patch up pinsDebug pins
7 years ago
ae1a2ff16f
Pins parity with 1.1.x
7 years ago
e0227f2110
Fix *_CS_PIN for RAMPS_FD
...
Fix #9778
7 years ago
5f8b2c2ff0
More descriptive environment error message
7 years ago
63bc6ade4f
Fix pinsDebug compile error
7 years ago
eb182c08af
Merge pull request #9733 from thinkyhead/bf2_random_fixup_branch
...
[2.0.x] Drop HAL_timer_set_count
7 years ago
03b48df7bb
RADDS: Add EEPROM Size ( #9737 )
...
needed for UBL
7 years ago
12c5fdfdb5
Fix CYCLES_PER_MICROSECOND conflict on STM32F1
7 years ago
aef9e036bf
More overridable FIL_RUNOUT_PIN
7 years ago
a6563df705
Sync pinsDebug_list.h between 1.1.x and 2.0.x ( #9693 )
7 years ago
bab0e975c8
The ENDER can use BOARD_MELZI_CREALITY ( #9692 )
7 years ago
da7c51d820
Space out some pins lines
7 years ago
e05673a379
[2.0.x] VIKI2 & RE_ARM changes ( #9686 )
...
* VIKI2 & RE_ARM changes
1. Remove `DISABLED(SDSUPPORT)` from ST7565 in `ultralcd_impl_DOGM.h`. These LCDs share pins with the SD card and can run at the SD card rates.
2. Add SDSS definition to `pins_RAMPS_RE_ARM.h`. Apparently the SDSS definition in `pins.h` is being processed before the one in `spi_pins.h` which resulted in not being able to read the SD card.
7 years ago
ff90cb409e
No space for E2 with ReARM+RAMPS
...
Addressing #9474
7 years ago
c49844df66
!ENABLED => DISABLED
7 years ago
378867d894
Update PB Rev.F pins
7 years ago
3e384b60ce
Malyan M200 fix E0_AUTO_FAN_PIN ( #9580 )
...
Fixes #8794
7 years ago
38c7d53bf7
Repair some spacing
7 years ago
4aff6c1c32
Tronxy X5S pins and configuration
7 years ago
05aa75cecf
Melzi boards use melzi pins
7 years ago
d3fdb44ad8
Update TMC section with SW SPI pins ( #9554 )
7 years ago
3168f0e646
Merge pull request #9549 from thinkyhead/bf2_prevent_comments_resetting
...
[2.0.x] Prevent watchdog reset due to many comments
7 years ago
c0dd9ef9f2
Support for AnyCubic TriGorilla board ( #9551 )
7 years ago
b7053156fe
Minor comment/condition cleanup
7 years ago
93af0365e8
[2.0.x] Add support for Cohesion3D ReMix and Mini ( #9512 )
...
* Add support for Cohesion3D ReMix and Mini
* Two separate pins files for pedantic reasons
7 years ago
23240f7986
Fix sw serial pins for TMC2208
...
From #9518 by @melvinisken
7 years ago
aecf0c9bb9
Allow override of CS pins generally
7 years ago
693843f1fa
Allow override of RAMPS CS Pins ( #9472 )
7 years ago
da3a0d619c
Add Selena Compact board ( #9407 )
...
5-axis, high performance, powerful board with Smoothieware opensource firmware. Designed for 3D printer, Laser cutter or CNC mill. Five changed independent drivers on board. Two extruders 3d printer support.
7 years ago
21179f8300
Fix the "slow" version of the G-code parser
7 years ago
5c69d45f5b
[2.0.x] TMC2130 support for LPC platform ( #9114 )
7 years ago
7a52dfad55
Merge pull request #9283 from thinkyhead/bf2_jgaurora_configs
...
[2.0.x] Add JGAurora A5 support
7 years ago
f875f49caa
[2.0.x] LPC1768: Fix: Serial pins disabled correctly when in use ( #9193 )
7 years ago
582d073de1
Patch up digital microstepping and SPI CS pins
7 years ago
a440522f84
Merge pull request #9284 from Bob-the-Kuhn/DUE-pins-debug
...
[2.0.x] PINS_DEBUGGING maintenance
7 years ago
382a5e3318
Clean up trailing whitespace
7 years ago
9de8c04945
Allow FIL_RUNOUT_PIN override on RAMPS-based boards
7 years ago
303d792b9f
Merge pull request #9253 from tcm0116/2.0.x-mks_sbase
...
[2.0.x] Cleanup MKS-SBASE compile warnings
7 years ago
16eb966ee3
PINS_DEBUGGING cleanup for DUE
7 years ago
63fd23ab1c
Cleanup MKS-SBASE compile warnings
7 years ago
c371bdc499
Expand RAMP case light possibilities
...
Pin 6 is only used by servos when 2 or more of them are used
7 years ago
f4e4c7a7c8
Merge pull request #9188 from thinkyhead/bf2_creality_ender
...
[2.0.x] Add Creality Ender config/board
7 years ago
2038722c52
LARGE_FLASH obsolete
7 years ago
f887719a40
Creality Ender board support
7 years ago
2c18faf3e4
General cleanups for HAL
7 years ago
a0246c5c96
Add support for STM32F7 MCU
7 years ago
1a3d2ad275
Merge pull request #9168 from marvin-sinister/rename-M100-2.0.x
...
[2.0.x] Rename M200 pins file to uppercase
7 years ago
5f807e37c5
A second rename saves nine
7 years ago
344ebc3bd2
Create and use pins_MELZI_MALYAN.h for Malyan M150
7 years ago
50c55b25f7
Renamed to upercase
7 years ago
1c41de16d4
Trailing whitespace clean
7 years ago
048d8a0158
CheapTRONIC v2.0 additions/revisions
...
Based on #9030
7 years ago
eca5cc8669
Merge pull request #9003 from Bob-the-Kuhn/Due-PINS_DEBUG-&-related
...
[2.0.x] add Due PINS_DEBUG support & misc improvements (replaces PR #8990 )
7 years ago
d190c702de
Add MKS_BASE Microstepping pins
...
Based on #9008
7 years ago
adb9ecf3cc
copy of PR #8990
7 years ago
cba44128d5
fix include
7 years ago
2925852244
Fix GT2560 A+ servo pin
7 years ago
de5ca96654
More parity with 1.1.x, plus whitespace
7 years ago
b055d8c39c
[2.0.x] Adding support for using the MKS_12864OLED with the SSD1306 controller ( #8814 )
...
* Adding support for using the MKS_12864OLED with the SSD1306 controller
* Update comment for correct controller type
7 years ago
15d05748df
Adding support for the Tronxy and Zonestar LCD
7 years ago
aed0cfa3d1
Various fixes for 2.0.x configs
7 years ago
0cd1e91056
[2.0.x] TMC driver update ( #8769 )
7 years ago
a5150c83a2
[2.0.x] Multiple updates to STM32F1 HAL ( #8733 )
...
* STM32F1 HAL
Adding files for STM32F1 HAL based on libmaple/stm32duino core.
Current persistent_store uses cardreader changes to be sent in separate
commit, but could be changed to use i2c eeprom.
There is another persistent_store implementation that uses the MCU flash memory
to emulate eeprom
Adding readme with some information about the stm32 HAL.
* Switch to Timer4 to avoid a hard reset on STM32F103C6 boards
On bluepill STM32F103C6 boards, using Timer5 results in a error() vector call. Switch to 4 since these are both general purpose, 16 bit timers.
* Add support for EEPROM emulation using Flash
Some low end machines doe not have EEPROM support. Simulate it using the last two pages of flash. Flash does not allow rewrite between erases, so skip writing the working version if that's enabled.
* Basic Pins for a malyan M200
This is a work in progress to go hand in hand with the STM32 work.
* Add support for ADC with DMA. This work has exposed a problem with the pin enumerations in STM boards vs what marlin expects (i.e, try defining PA0 as a temp pin). The hack can be removed with we go to fastio completely. To see this work, set something in adc_pins to a value like PA0 and connect your pullup resistor'd thermistor.
* Missing file - change HAL_adc_init to actually do something
We have an actual ADC init function now.
* Remove pinmode hack
Remove the pin mode hack that I was using to init PA0.
Updated Readme.md
* Several changes to timers and GPIO
Faster GPIO, and faster timer functions by accesing registers and
libmaple.
Still more changes pending for the Timer's code to skip using the
HardwareTimer class altogether.
Switch all enums to be within #defines
This change allows a user to have, for instance, TEMP_4 and TEMP_BED definied but nothing else. The enums which are not defined move "out", allowing the first ones to take the slots in the enum, and since the array is sized on ADC_PIN_COUNT, we always have the right size data and in order.
* Update Malyan M200 pins
Update Malyan M200 pins with correct fan values.
* Test all pins on actual hardware, update definitions
Some of the pin definitions were from knowlege base/pdfs. Now they've been tested against actual hardware. This should be very close to final.
* Update HAL_timers_Stm32f1.cpp
* Add sample configurations for Malyan M200
Add sample configuration for Malyan M200 without bed leveling, and move fan to auto cool E0 since this printer by default has only one fan.
Choose the timer based on MCU defintion. Timer5 is not valid on C8/CB class boards, so use Timer4 for the step timer.
readme.md update
* Updates to timers, and some stm32 boards definitiions
* Correct pin toggle macro.
* Remove duplicated Malyan M200 entry from pins.h
* Update configuration_store.cpp
* Formatting, indentation
* Formatting in HAL_Stm32f1.cpp
7 years ago
d576f5408e
Add MiniRAMBo 1.0a board
7 years ago
c40cb52342
Use MB() for Megatronics 3.1
7 years ago
43ea265b78
Merge pull request #8685 from MateuszKrawczuk/patch-3
...
Update TEMP_BED_PIN in MIGHTYBOARD_REVE
7 years ago
a3b098b4be
Whitespace clean
7 years ago
5320906b0b
Update TEMP_BED_PIN in MIGHTYBOARD_REVE
...
Pin K7 number in fastio1280.h is 69, but it's also ADC15 pin.
To get correct value from ADC reading it should be set as 15.
7 years ago
772298257b
Creality pins spacing, MINIPANEL CS pin
7 years ago
b6ba32ce75
Support for RAMPS Plus (3DYMY)
7 years ago
7f88334aa3
Done cleanup and removed duplicates in pins_RuRAMPS4D.h ( #8582 )
...
Remove duplicates, with followup fixes
7 years ago
a67cf78c6b
Clean up whitespace, spacing
7 years ago
7d8b66e207
Merge pull request #8570 from Bob-the-Kuhn/Sbase-PWM
...
[2.0.x] MKS Sbase - add servo pin definitions and add directly controlled PWM
7 years ago
59b32c25b5
MKS Sbase changes
7 years ago
5f9592a523
Cleanup narrowing warning in pin_is_protected
7 years ago
fa577392b2
Add BIQU BQ111-A4 board
7 years ago
c613a1ed38
Fix indentation, stepper.h dependency, etc.
7 years ago
f011a32771
Board definitions for Ultratronics Pro v1.0
7 years ago
bb1a6eea88
Remove pin count check for MIGTHYBOARD_REVE
...
Remove assert and unused code since it is implemented in pinsDebug_plus_70.h
7 years ago
e2724c68ab
Update pins_RURAMPS4D.h
...
Add and bugfix pins
7 years ago
ba8bc7ea80
Cosmetic tweaks
7 years ago
a28ccabe2a
M42 P1.20 fix
7 years ago
32512332df
Apply some formatting
7 years ago
14ebedca27
Drop unused LARGE_FLASH option
7 years ago
b7feb53e8a
Support for Extrudrboard in Printrboard Rev.F
7 years ago
c009a990e4
[2.0.x] Fix some 8-bit Teensyduino compile warnings ( #8385 )
...
* Fix some 8-bit Teensyduino compile warnings
-Override Teensyduino legacy NOT_A_PIN 127 define
-some fixups for Printrboard_RevF pins
* Proper cleanup of Printrboard Rev.F pins
* Apply LCD fixes to Printrboard v1
7 years ago
81b91b3f9d
Clean up some trailing white-space
7 years ago
006dad4b52
Add pins_RURAMPS4D.h & change pins.h
...
http://3dtoday.ru/blogs/svs0724/ruramps4d-ramps-for-adruino-due-the-pilot-shipment-available-for-zack/
7 years ago
00514857e9
SBASE serial port -1, RAMPS spacing
7 years ago
8875885a15
pins add old names
...
fix typo
re-write PWM section, add "not on Re-ARM" list
7 years ago
4efaef7039
[2.0.x] Fix archim2 SSDS define ( #8278 )
...
* Fix SSDS define
* Update pins_ARCHIM2.h
7 years ago
b91a822d7a
Correct RAMPS_D8_PIN for Re-ARM
7 years ago
ca7d36d9ed
RAMPS pins for ANET_KEYPAD_LCD
7 years ago
70be4d206e
[2.0.x] UltiMachine Archim2 ( #8190 )
...
* UltiMachine Archim2 support
* SPI gets included by the library
* Invert TMC2130 diag pin state
* Clean up Archim2 pins
* Update Archim2 config
* FAN2 -> FAN1
* Cleanup
* Add brief Archim installation instructions
* Bring pins into compliance
* Update 1.0 SD Detect pin for 1.1
* Update Configuration.h
* Update pins_ARCHIM2.h
7 years ago
31f112cf58
Cleanup trailing whitespace
7 years ago
eb13b8d985
Add MKS Gen L board
7 years ago
063e957fc4
Update pins_MKS_SBASE.h ( #8188 )
...
* Update pins_MKS_SBASE.h
Deleted E_MUX2, not used.
Changed #define LCD_PINS_D4 P0_14 // EXP1.5 to #define LCD_PINS_D4 P0_15 // EXP1.5, wrong in MKS's pinout schematic.
Swapped TEMP_BED_PIN and TEMP_0_PIN port's, request from user, more logical...
* Update pins_MKS_SBASE.h
Moved MUX signals to J8 and re added MUX2, cleaner wiring..
7 years ago
9cc1d8e312
[2.0.x] Support for SilverGate Board
7 years ago
577659cacf
Basic support for Azteeg_X5_GT ( #8139 )
...
* Basic support for Azteeg_X5_GT
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
* Add fan pins for AZTEEG X5 GT
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
* Fix endstop pins
* Add servo0 pin
7 years ago
2cdde08339
Apply items specified in code review
...
Followup to #8122
7 years ago
6e5f13a5c2
Merge pull request #8122 from Bob-the-Kuhn/2.0.x-restore-Re-ARM-RepRap-Discount-Full-Graphics-fix-(partial-solution)
...
2.0.x - Restore fix for garbaged display on Re-ARM with RepRap Full Graphics Smart Controller
7 years ago
b7a66742dd
tested
...
add sort alpha section to other LPC1768 boards
7 years ago
bbc2e66634
Fix AZSMZ MINI pins for new LPC1768 pinmapping
7 years ago
b2a48f1a04
Provide a SERVO0_PIN for non-standard LCD
7 years ago
325233b454
Fix automatic stepper assignment for X/Y/Z dual stepper drivers ( #8130 )
7 years ago
50b4f9cbf7
LPC1768 Pin Mapping and M43 cleanup ( #8119 )
...
* LPC1768 M43 cleanup
* Update pinmapping.h to #define pins
7 years ago
ada90f7335
Clean up trailing spaces
7 years ago
9e699811d2
Make LPC1768 pinmapping not specific to Re-ARM ( #8063 )
...
* Merging early because of build failures. See #8105
* Make LPC1768 pinmapping not specific to Re-ARM
* Add HAL_PIN_TYPE and LPC1768 pin features
* M43 Updates
* Move pin map into pinsDebug_LPC1768.h
* Incorporate comments and M226
* Fix persistent store compilation issues
* Update pin features
* Update MKS SBASE pins
* Use native LPC1768 pin numbers in M42, M43, and M226
7 years ago
7b3098bbd5
Add AZSMZ Mini ( #8005 )
...
* Add AZSMZ Mini
* Remove tabs, adjust spacing
* Renumber boards to group by family
* Patch up spacing
* Tweak
7 years ago
10a5e4d80f
Merge pull request #8078 from thinkyhead/bf2_mks_mini_lcd
...
[2.0.x] Add MKS MINI 12864 support to GT2560
7 years ago
ee9b8bf0f1
Add MKS MINI 12864 support to GT2560
7 years ago
90a14b4f5b
Clean up HAL trailing spaces, MKS SBASE pins
7 years ago
8c78f8f790
Add Makeboard MINI for Micromake C1
7 years ago
eeb4611606
Add proper support for the AZSMZ 12864 LCD on a SMART RAMPS
7 years ago
799360c576
Enhance Teensy/RAMPS pins files
7 years ago
91e28edda6
[2.0.x] Add new board: MKS Sbase ( #7945 )
...
* Add files via upload
* Add files via upload
* Add files via upload
* Checked LCD / edited / revised pins_MKS_BASE.h
As requested :)
* Delete Configuration_adv.h
* Delete Configuration.h
* Deleted /Marlin/Marlin/src/config/examples/MksSbase/*.* and moved them to /Marlin/Marlin/src/config/examples/Mks/Sbase/*.*
* Add files via upload
7 years ago
Scott Lahteine