668 Commits (0d166f9c7dccbf5f1cc243f06e3882c82a4bd86a)

Author SHA1 Message Date
pinchies 3021097888 Add JGAurora A5S and A1 (STM32F103ZET6) (#14291)
- Now compiles and works correctly with changes to HAL timers and watchdog.
- Does NOT include awesome work on touch screen function.
- Does have working LCD and SD-based EEPROM.
6 years ago
mb300sd bf8bfb5c66 Add Coolant Control M7/M8/M9 (#10745) 6 years ago
Aliaksei Kvitsinski 648a91bce8 Support for Z-Bold board (#14024) 6 years ago
felixstorm 9439fab7fd Fix ESP32 servos, platformio.ini, etc. (#14247) 6 years ago
yangwenxiong b0a4ea79b8 BigTreeTech SKR Mini v1.1 (#14041) 6 years ago
mikeshub a3f034b95e FFCP updates. Update XY soft endstops on tool_change (#14125) 6 years ago
Scott Lahteine 9206c0e869 Use limit switch overrides 6 years ago
Scott Lahteine 34d2801bbe Rename pins file (2) 6 years ago
Scott Lahteine fa3b5fb059 Uppercase pins filename 6 years ago
InsanityAutomation bbcb61e042 Initial Commit - Add board 6 years ago
Scott Lahteine 81cee05476 Update some env in pins.h 6 years ago
felixstorm bc5a1fe562 Various fixes for ESP32 (#14102) 6 years ago
Giuliano Zaro e1bf34bdc9 Ruramps4d typo fix (#14096) 6 years ago
Ludy fafd73a3af Update copyright in headers (#14092) 6 years ago
Scott Lahteine 9b5f9dda0e Update analog pins labels 6 years ago
InsanityAutomation 07afe69cee Fix some bad AZTEEG_X5_MINI pins (#14011) 6 years ago
Bob Kuhn 48bd8899bd Cohesion 3D Remix: Onboard SD card, Fysetc LCD (#13991) 6 years ago
Bob Kuhn 75eca5c4f8 Fysetc pins updates for RAMPS and SKR 1.3 (#13963) 6 years ago
doggyfan 23a8707ef1 Configurable Thermistor (#13888) 6 years ago
J.C. Nelson 172abc305b Malyan M200 core fixes (#13927) 6 years ago
Robert Mendon 24177954dd Add missing AZSMZ Mini SPI pins (#13824) 6 years ago
Bob Kuhn c48e6be366 Fysetc panel, RUMBA and ReARM pins, SPI mode 3 (#13900) 6 years ago
Chris fd9d3ae181 Re-Arm 4x TMC2208 stepper improvement (#13819) 6 years ago
Scott Lahteine e7682eea42
Use Arduino.h include wrapper (#13877) 6 years ago
Scott Lahteine bf54251a10
Finish, improve, clean up FYSETC_MINI_12864 revisions (#13871) 6 years ago
Scott Lahteine e43afb1a58 Clean up SKR pins 6 years ago
Scott Lahteine 63f6ad3fd2 Basic RAMPS SD_DETECT_PIN override 6 years ago
Bob Kuhn 81ca5a4cd4 Fix and improve FYSETC LCD support (#13767) 6 years ago
felixstorm 4e35e6c705 Fix SS pin in ESP32 HW SPI (#13781) 6 years ago
jmdearras b65cb5704d Fix, improve FYSETC_MINI_12864 support (#13730) 6 years ago
Scott Lahteine 69c333ead9 More universal Formbot pins
Replace `ROXYs_TRex` with pre-defines of the relevant pins at the configuration level.
6 years ago
jmdearras 5f49b65c1f Move LPC SD options to configs, add MKS_MINI_DISPLAY to SKR boards (#13712) 6 years ago
Bob Kuhn 9b578ca343 Support FYSETC_MINI_12864 on Re-ARM, RAMPS_FD, MKS SBASE (#13717) 6 years ago
Laurent df75a606ff Support MKS SGen board (#13694) 6 years ago
InsanityAutomation aa0f7afbe6 Fix call to uninitialized PWM pin, heater 2 overlap (#13674) 6 years ago
ManuelMcLure 492883859e Don't protect unused CS pins (#13647) 6 years ago
ANMay-ru 052f2ac352 Fix RURAMPS4D baud rate (#13644) 6 years ago
klcjr89 a8edd4f6d4 Fix Azteeg X5 MINI BOARD_NAME (#13632)
Co-Authored-By: klcjr89 <klcjr89@users.noreply.github.com>
6 years ago
Scott Lahteine 5018fdacbe
Support FYSETC_MINI_12864_PANEL (#13365) 6 years ago
InsanityAutomation ba31d39f6d Azteeg X5 Mini support (#13425) 6 years ago
Scott Lahteine 0e3c9e726d Set default Raptor runout/caselight pins 6 years ago
Scott Lahteine c8a83fb122 SPINDLE_LASER_ENABLE => SPINDLE_LASER_ENA 6 years ago
Bob Kuhn 9a56d90150 Fix M43 on LPC176x (#13587)
The real fix. PR #13568 was wrong.
6 years ago
Alexander Gavrilenko 3c47e1b4d1 Support Black STM32F407VET6 with RAMPS-like shield (#13524) 6 years ago
drzejkopf b1f739e27b CR10_STOCKDISPLAY support in Bigtreetech SKR (#13516) 6 years ago
Alexander Amelkin e40636a7c1 Replace digitalPinHasPWM with HAS_TIMER (#13520) 6 years ago
Yannik Sembritzki 0d3ea59bcf Add pins for Dual Z UART on SKR 1.3 (#13474)
Fix #13470
6 years ago
Scott Lahteine 144018736a Use USES_Z_MIN_PROBE_ENDSTOP 6 years ago
InsanityAutomation 5b2c37d6c1 Followup to BLTouch (#13422) 6 years ago
Scott Lahteine b376c7e374 Group DISABLED items 6 years ago
Scott Lahteine 49cf92dc36
Extended condition macros (#13419)
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
6 years ago
Scott Lahteine ad8b82d054 Fix KILL_PIN assignment for MKS_MINI_12864
According to #13397
6 years ago
Scott Lahteine 4555ae448f Fixups for ESP32 6 years ago
Scott Lahteine fa11427ec6 Remove obsolete LCD_CONTRAST 6 years ago
Marcio Teixeira 00fc43144a Follow up fixes to various PRs. (#13334)
- Ensure `MarlinUI:get_progress` is defined for `ExtUI`.
- Fix for `BACKLASH_SMOOTHING` with small segments.
  `BACKLASH_SMOOTHING` with extremely small segments failed to fully correct due to the correction factor being rounded down. Rounding up ensures the entire backlash will converge to zero even for small segments.
- Add pinout for the beta revision `EINSY_RETRO`.
- Update soft endstops with tool offsets (for toolchange et. al. move clamping) (#12568)
6 years ago
Scott Lahteine 44571775bd Further support for 6 extruders 6 years ago
Scott Lahteine 893ee68b52 Clean up trailing whitespace 6 years ago
Tobias Frost 56fdcf93d1 Disallow SD_DETECT_INVERTED with FYSETC F6. (#13307) 6 years ago
Scott Lahteine d71dc5cf42 Fix for Ender 4 fan/case light pin
See #12731
6 years ago
Anthony Rich 7640b328df Support for Tronxy X5S 2e (#13297) 6 years ago
Scott Lahteine fa0d909dd3 Add FIL_RUNOUT_PIN for BIGTREE_SKR_V1.3
See #13267
6 years ago
Vasily Evseenko 71773b128d Fix stepper use before init. Add Ultimaker2+ Extended clone config (#13284) 6 years ago
Scott Lahteine 2f1e1dcb42 Gradual step towards EXTRUDERS 0 support 6 years ago
Scott Lahteine 99d0022fae
Drop the Z_MIN_PROBE_ENDSTOP option (#13276) 6 years ago
Msq001 5b7ad3a5a0 Fix SKR onboard TF card CS pin (#13272) 6 years ago
Msq001 f8a39919fa Add Bigtree SKR 1.3 board (#13267)
Co-Authored-By: Msq001 <msq001@users.noreply.github.com>
6 years ago
Bob Kuhn ddbe4cfa20 Printrboard G2 support (#13116) 6 years ago
Scott Lahteine a79b9bbe6b Cleanup whitespace, add a const 6 years ago
Chris Pepper 88cc1d1a31
Fix Preprocessor syntax in Re-ARM pins file (#13247) 6 years ago
Scott Lahteine 15aa932aa6
HAL for Linux (#13146) 6 years ago
kwalters3 5eb82ca6a8 Change SSD1306_OLED_I2C_CONTROLLER to HAS_SSD1306_OLED_I2C (#13223) 6 years ago
Thomas Moore 9f5e4e5ad8 Update LPC1769 Pins Files (#13183) 6 years ago
Greg Nutt 608a6810e7 Fix DOGLCD_A0 pin in pins_Smoothieboard.h (#13217) 6 years ago
Scott Lahteine 44c22e3935 Provide a default MAX6675_SS_PIN for ReARM
See #8010
6 years ago
InsanityAutomation 33a6d52965 Fix a RAPTOR2 pin conflict (#13205) 6 years ago
Scott Lahteine 18458ec42b Error in Smoothieboard for unsupported display 6 years ago
Andy Shaw 84fc400aba Update BIQU SKR V1.1 pins, add TMC2130 settings (#13166)
* Remove untested displays add TMC2130 configs.
* Remove references to the ReARM, delete untested displays. Add TMC2130 settings. Cleanup spacing, etc.
6 years ago
Scott Lahteine 7cf9b93f26 Add HAS_FILAMENT_SENSOR ahead of 12962 6 years ago
Scott Lahteine 0feeef2604 Update copyright in headers 6 years ago
Simon Jouet 5cd0fa3ce1 Basic GPIO expander using the ESP32 I2S peripheral (#12959) 6 years ago
Scott Lahteine 43b29c093b Update pinsDebug_list.h with XY PWM pins 6 years ago
Scott Lahteine 95d3f3953a DEFAULT_WEBSITE_URL => BOARD_WEBSITE_URL 6 years ago
Scott Lahteine 870757aa17 Tweaks to pins_GT2560_V3.h 6 years ago
Psycho 3c88cac2e9 Velleman Vertex Delta pins (#13072) 6 years ago
Scott Lahteine ca1be02bf0 Tweak some pins formatting 6 years ago
InsanityAutomation 68bbac207e Update pins_FORMBOT_TREX3.h (#13058) 6 years ago
raTmole 988b5aa4e6 Update GT2560 V3 pins (#13036) 6 years ago
Scott Lahteine 159d7eefda New boards entry for the A20M 6 years ago
Thomas Moore 02ab66fca3 Update Cohesion3D Pins Files (#13027) 6 years ago
Scott Lahteine 0f07ba4f09 Tweak some comments 6 years ago
Bob Kuhn 7c1a5e3c47 Fix TEMP_TIMER in pins_STEVAL.h (#12994) 6 years ago
Bob Kuhn 2f35747f29 L6470 SPI daisy chain support (#12895) 6 years ago
Scott Lahteine 6453b82a5e Clean up trailing whitespace 6 years ago
Gert-Jan Rodenburg bb30927549 Fix pins for ZONESTAR_LCD with Zonestar ZRIB (#12956) 6 years ago
lanserge c2cf8ffa82 Add support for Arduino DUE Shield Kit (#12950) 6 years ago
chrisly42 99e5e8362f Rapide Lite 200 config, pins_RL200 RUMBA clone (#12848) 6 years ago
Scott Lahteine 6411680364 Update some pins spacing 6 years ago
Scott Lahteine 712e23c383 Fix up some whitespace 6 years ago
Bob Kuhn d08f27e27b Add support for STEVAL 3DP001V1 (#12894) 6 years ago
mikeshub 7fde8d9d1e Add CreatorPro / Makerbot / QIDI / etc and Mightboard RevE support (#12855)
- Fix a bug in MAXxxxx thermocouple temp reporting.
- Add support for 3-wire HD44780.
- Add support for PCA9533 RGB driver.
- Add configuration examples for FlashForge CreatorPro.
6 years ago
Chris Barr 1d33784bf9 Add RUMBA32 Board (#12856) 6 years ago
Karl Andersson 8ae6f1e556 Fix errors and some compiler warnings with HAL_STM32 PlatformIO build (#12869) 6 years ago
jmz52 d372e7e477 SDIO support for STM32F1 (#12782) 6 years ago
luxflow 7f244f9b9c Update LPC SD pins for BIQU SKR (#12767)
(Exactly matching the Azteeg X5 MINI Wifi)
6 years ago
jmz52 813a4ea107 Add support for Mks Robin TFT display (#12706)
* Add support for MKS Robin TFT display

- Add support for MKS Robin TFT display and encoder for MKS Robin board.
- Generic 128x64 UI with x2 upscale is used (for now).
- Tested on MKS Robin TFT V2.0 with ST7789V controller.
6 years ago
Scott Lahteine 2aaa681dea Remove unused Cheaptronic pins 6 years ago
Ludy 74c47803f7 Add VORON printer (#12705) 6 years ago
petieken d9cf5e4883 Update pins_BIQU_SKR_V1.1.h (#12758) 6 years ago
Scott Lahteine 371d9a1acf Fix line-endings, formatting, whitespace
Followup to #12770
6 years ago
Alain Martel 44ed34475b Add MKS BASE 1.4 pins (#12770) 6 years ago
Msq001 f8c5d31864 Bugfix 2.0.x add motherboard pins define (#12689)
- `pins_BIQU_B300_V1.0.h` defines pins for B300, as found in the BIQU Thunder 3D printer.
- `pins_BIQU_SKR_V1.1.h` defines pins for bigtree/BIQU SKR V1.1 motherboard.
6 years ago
InsanityAutomation b7a8dcc35d Update Formbot T-Rex 3 pins (#12662) 6 years ago
Ludy f7127c44f8 Wanhao Duplicator i3 Plus pins create (#12701) 6 years ago
jmz52 33abb86b7e Add support for MKS Robin board (#12650)
Implement initial support for MKS Robin (STM32F103ZET6) board.
Custom build script is used to generate encrypted firmware compatible with original MSK Robin bootloader (i.e. safe firmware update from SD card and possibility to go back to original close-source firmware).
6 years ago
Ludy 33f3c75213 GTM32 Pro VB FAN-PIN correction (#12666) 6 years ago
Ludy 3829d6ccf8 FYSETC F6 13 - E2_SERIAL_TX_PIN correction (#12667) 6 years ago
Kadah d35dcafa3d Added MKS MINI 12864 support to FYSETC F6 V1.3 (#12656) 6 years ago
Ludy 97de9d54a5 Fix broken pins file include (#12617) 6 years ago
Scott Lahteine 6cf8d40f41 Fix some serial echos of pin states 6 years ago
Scott Lahteine 7d15854514 Add Z_MIN_PROBE_PIN to MKS SBASE pins 6 years ago
teemuatlut 50b2fbd031 Trinamic: Split stealthChop, improve driver monitoring, etc. (#12582) 6 years ago
Scott Lahteine 3c58b16c9f
Move stepper enable/disable to stepper_indirection.h (#12562) 6 years ago
Scott Lahteine c986239837
A single SERIAL_ECHO macro type (#12557) 6 years ago
InsanityAutomation dec721c52b Add Formbot Raptor2 and Raise3D pins (#12532)
* Add Formbot Raptor2 board
* Add Raise3D Rumba board
6 years ago
Scott Lahteine 0a638cc022 Adjust Formbot Raptor pins 6 years ago
Marcio Teixeira 7109dadd21 Additional pin definitions for Archim 2 (#12500)
- Added GPIO pins to Archim 2
- Added new 108 pin to `fastio_Due.h`
6 years ago
Scott Lahteine b738972e69 General cleanup of Re-ARM pins 6 years ago
Ludy 1f93d2bcf7 Fix LCD compile error, etc. (#12472) 6 years ago
Scott Lahteine 9d13f07d09 GTM32 Pro VB changes from Markku Sinisalo 6 years ago
Nils Hasenbanck 779b2709ec Change temperature pin order for RemRam V1 (#12458)
Beta testers suggested to adopt the RAMPS order of temperature probe connectors. This commit fixes the order to the RAMPS order.
6 years ago
Ph0non 984c4ba8c7 Enable SD Card on RepRap Display and RADDS (#12446)
* Enable SD Card on RepRap Display and RADDS

Define the necessary pins in `pins_RADDS.h` (copied from the `RADDS_DISPLAY` section) for the use of the SD card slot on RRD.
6 years ago
Mateusz Krawczuk ca21ac6b9b Support two MAX6675 thermocouples (#8686) 6 years ago
Scott Lahteine edfd106bc5
Rejigger Filament Runout class (#12428) 6 years ago
Scott Lahteine f4c128ecaa
Move RRW keypad code to a common method (#12429) 6 years ago
Scott Lahteine ebf585b673 Fix an old sanity check 6 years ago
Ryan 052d102ded UltiMachine Archim 1 support (#12404) 6 years ago
Scott Lahteine 664e20754d Clean up pins files 6 years ago
Scott Lahteine 4ed6397e5d
More comprehensive NO_LCD_MENUS (#12367) 6 years ago
Scott Lahteine 9c8f083d6c Extend pins errors to include the processor 6 years ago
Scott Lahteine 147e270208 Restore GTM32_PRO_VB temp and heater pins
Undo #12345
6 years ago
Phr3d13 a813900fce Add Geeetech Rostock 301 config, update GTM32 Pro VB pins (#12345) 6 years ago
Scott Lahteine c536ee1122 Clean up bq Zum Mega 3D pins 6 years ago
Scott Lahteine 0c85869c26 Clean up file endings 6 years ago
Scott Lahteine 3c21483c88 Provide DOGLCD SPI pins for MKS SBASE + VIKI 6 years ago
Scott Lahteine 9c0e05552e Suppress some compile warnings 6 years ago
Karl Andersson 176654791e Use board-specific or platform SPI pins in HAL_STM32 (#12323) 6 years ago
Scott Lahteine 608be966d7 Add servos to pins_FYSTEC_F6_13.h 6 years ago
InsanityAutomation ad60f0691c Add Creality3D RAMPS pins definitions (#12229) 6 years ago
Scott Lahteine 5580773191
Use FastIO, sanity-check LPC SD options, apply formatting (#12231) 6 years ago
Hannes Brandstätter-Müller 6ee2af5e2d Simplify pins_TRIGORILLA_14.h (#12162) 6 years ago
Scott Lahteine b381cad399 Clean up trailing whitespace 6 years ago
Karl Andersson 4eb798dbdc Add support for Arm'ed (STM32F4) board (#12147) 6 years ago
Scott Lahteine a81763c237 Pins E sanity check tweak 6 years ago
Michael Triffon eded90bf87 Updated Azteeg X5 Mini Wifi pins for onboard SD (#12133) 6 years ago
Chris Pepper 3c13c9e3e9 [LPC176x] Fix USEABLE_HARDWARE_PWM macro, cleanup multiple LED support (#12129) 6 years ago
Nils Hasenbanck 0519ef0802 Update pins for final RemRam v1.3 board (#12125) 6 years ago
Karl Andersson 8b5e51c9aa STM32F4xx modifications for HAL_STM32 (#12080) 6 years ago
Christopher Pepper 42fb7c14b0 Update the sdcard usb sharing config and apply to Re-ARM 6 years ago
Andy Shaw 870bfd08f5 usb and sdcard sharing improvements
* Add traceback after watchdog timeout

Add the cpability to perform a traceback following a watchdog timeout.

* Enhanced hardware SPI

Allow use of either SSP0 or SSP1.
Ensure that no data is left in I/O buffers after calls to enable sharing of SSP hardware.

* Make flash emulation of eeprom the default

Make use of flash for eeprom storage the default. This means that usage of eeprom will not cause USB drive mount/unmount operations.

* Allow sharing of SD card

SD card I/O operations from the USB stack take place in idle loop, rather than at interrupt time. Allowing sharing of the SPI bus.

New configuration options to allow usage of the SD card to be specified.

* Fix problem with hardware SPI pins
6 years ago
Roxy-3D 25b980dddb
Remove erroneous Pin 12 definition
There is no switchable Power Supply.   Don't put it on Pin 12.   
(Pin 12 is actually FAN1)
6 years ago
Scott Lahteine 1407afad73 Move SENSITIVE_PINS to its own file 6 years ago
Scott Lahteine 45e738876a Add stepper MS3 support
Co-Authored-By: TheLongAndOnly <thelongandonly@users.noreply.github.com>
6 years ago
Hannes Brandstätter-Müller a3e8cb1e44 [2.0.x] Ender-4 small improvements in Configuration (#11843) 6 years ago
Marcio Teixeira ec9aa4f468 [2.0.x] Miscellaneous fixes (#12039)
* Allow override of soft SPI pins in `pins_*.h`
* Add default case to avoid compiler warning.
* Additional pin definitions for Archim 2.
* Einsy Retro has same timings as Einsy Rambo.
6 years ago
Marcio Teixeira 906a24fa81 Extensible user interface API (#11193) 6 years ago
teemuatlut c447d75916 Add support for TMC2660 (#11998) 6 years ago
Scott Lahteine 0fcdfdeed6 Followup to #12017 6 years ago
Phr3d13 acac2adfc8 Add support for MeCreator2 (#12017) 6 years ago
Scott Lahteine 1358bd9319 Make MAX_EXTRUDERS always 6 6 years ago
Scott Lahteine 348004c34f
STM32F7 HAL using the official STM32 Arduino Core (#11750) 6 years ago
Scott Lahteine 11ac75edcb
Use PGM_P for PSTR pointers (#11977) 6 years ago
Mitch Roote d016b572e3 [2.0.x] Add pin configuration for Fysetc F6 (#11932) 6 years ago
Victor Tseng eeab4141db [2.0.x] Anycubic Trigorilla 14 pins tweak (#11869) 6 years ago
InsanityAutomation cb9dc56630 Add GT2560 v3 support (#11914) 6 years ago
Scott Lahteine cee34f7290
Followup for BABYSTEP_HOTEND_Z_OFFSET (#11916) 6 years ago
InsanityAutomation 1104054d73 2.0 IDEX Independent z offset and other fixes (#11862)
* Add Formbot Raptor board

Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>

* Add a second Z probe Z offset

Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>

* Modify method to utilize live adjustment of hotend z offset

Should probably move config option to babystepping and rename as it may now apply to all multiextruder systems

* Move config item and catchup other code to current method
6 years ago
Scott Alfter 140caf99b8 E0_CS_PIN moved from A13 to A15 on RAMPS-FD v2.2 (#11865) 6 years ago
Scott Lahteine 09a2bee8aa
Support more filament runout sensors in M119 (#11851) 6 years ago
Roxy-3D 0780913848 IDEX Improvements (#11848) 6 years ago
Scott Lahteine 1718eff54a Code changes supporting up to 6 extruders 6 years ago
Scott Lahteine d948c6e867 RADDS Extension Board V3 support 6 years ago
Holger Müller 1a6f2b29b8 Add support for Triple-Z steppers/endstops 6 years ago
Scott Lahteine 8584d3697d Fix servo count define conflict
`MAX_SERVOS` => `NUM_SERVO_PLUGS`
6 years ago
Scott Lahteine fe9f088d60
[2.0.x] Anycubic LinearPlus, Trigorilla 1.4 (#11730) 6 years ago
Scott Lahteine b6aae2b322 Tweak RAMPS_FD_V1 pins 6 years ago
Scott Lahteine 7391e23332 Fix RigidBoard FAN_PIN collision 6 years ago
Roxy-3D e3aac59637
Create pins_FORMBOT_TREX3.h 6 years ago
Roxy-3D f580247581
Create pins_FORMBOT_TREX2.h 6 years ago
Roxy-3D 073857646b
seperate the T-Rex2 and T-Rex3 support 6 years ago
Roxy-3D fe4fc2883b
Add support for Formbot T-Rex3 6 years ago
Roxy-3D 9651ceb36b
Correct spelling of #endif 6 years ago
Scott Lahteine 86ee74731e Comment for RADDS + RRDFGSC 6 years ago
Kevin ae1271b2ae RADDS: Update Full Graphic Display Pins (#11731) 6 years ago
Roxy-3D d62f4df0b7
Disable LCD Pins used by new Max7219 hook up if in that mode 6 years ago
Scott Lahteine 8e18e48d49
Merge pull request #11610 from Freeviv/bugfix-2.0.x
[2.0.x] Editable servo angles
6 years ago
Scott Lahteine 18f1af2dca Fix up Teensy tests, servo sanity 6 years ago
Scott Lahteine 74a04aed55 Fix compile error with NO_LCD_MENUS 6 years ago
Scott Lahteine 3e81745e81 Fix issues, make optional 6 years ago
Ilya Bukhonin 7ecb8b4af5 [2.0.x] Teensy 3.1 and 3.2 support (#11460) 6 years ago
Pablo Crespo 409a0632af [2.0.x] Add Morpheus Board support (#11651) 6 years ago
Chris Pepper b71c2b8651 [2.0.x] Update LPC176x tests, fix clean script (#11617) 6 years ago
Scott Lahteine acf5ae3083 !ENABLED => DISABLED 6 years ago
Michael Triffon f8c52c9c29 Azteeg X5 Mini WiFi support (#11601) 6 years ago
Scott Lahteine 97f6396b25 Fix RE_ARM LCD pins to avoid #undef 6 years ago
Scott Lahteine 0e25f66c09 Fix Ultimaker servo pin
As pointed out at https://github.com/MarlinFirmware/Marlin/issues/7981#issuecomment-407116642
6 years ago
Scott Lahteine ad12b9b46b Fix indentation, whitespace, spelling, formbot pins... 6 years ago
Scott Alfter b5537dde7f need to add E2END to pins_RAMPS_FD_V2.h (#11564) 6 years ago
Roxy-3D 62ce937540
Update pins.h to include the Formbot board 6 years ago
Roxy-3D a82be36d5d
Create pins_FORMBOT.h 6 years ago
Scott Lahteine 6964e1a95a Clean up trailing whitespace 6 years ago
Scott Lahteine 0bda22367b Allow Einsy RAMBo FAN1_PIN override 6 years ago
Greg Nutt a1a5367380 Smoothieboard V1.0/1.1 and A5984 support 6 years ago
Scott Lahteine 9bae413901
Add Bigtreetech/BIQU KFB 2.0 board (#11446) 6 years ago
Scott Lahteine aae02827c0 Cosmetic pins changes 6 years ago
forkoz 2cc950d67e [2.0.x] MKS SBASE Trinamic examples/support (#11402) 6 years ago
Dave Johnson 8a24ff94d1 AT90USB1286 PIO cleanup and optimization (#11230)
-normalize `env` and `board` to lowercase naming convention.
-make board `name` follow descriptive convention.
-implement `-fsingle-precision-constant` compile optimization per https://github.com/MarlinFirmware/Marlin/pull/11178#issuecomment-401673901
-fix typo in 5DPRINT entry.
7 years ago
Lee Olivares 094e6d81a5 Add Einstart-S support (#11219)
Indeed the HAL does not need to be mucked around with to expose ATmega2560 pins not available as numbers on the MEGA board, I'll need to update the wiki with that tidbit and a reference to the pin-mapping comment in `fastio_1280.h`.
7 years ago
Bo Herrmannsen 67b205fd45 Add support for board RuRAMPS4D v1.3 (#11363) 7 years ago
forkoz d1c6687ecd Update MKS sBase pins (#11357) 7 years ago
teemuatlut fbcdf5eaeb Simplify stepper driver per-axis selection 7 years ago
Scott Lahteine 5379c115c8 Fix Trigorilla include typo 7 years ago
TheLongAndOnly cedc158106 [2.0.x] Board specific init macro (#11170) 7 years ago
Scott Lahteine f9a090b2cf Fix Trigorilla 1.4 pins
See #11097
7 years ago
Scott Lahteine 444725ae9a Non-conflicting CS pins for MKS Gen L 7 years ago
Michael Triffon 7e802145cc [2.0.x] Add CR-10 stock display support for Re-Arm (EXP3) (#11068) 7 years ago
Chris Pepper 0312c42f9d [2.0.x] LPC176x Serial cleanup (#11032) 7 years ago
Simon Jouet e2aeda61ed HAL for Espressif ESP32 Wifi 7 years ago
Karl Andersson e0276d2f32 Official STMicroelectronics Arduino Core STM32F4 HAL compatibility (#11006) 7 years ago
Scott Lahteine 88314b8910 CREALITY_ENDER is long gone
As noted in #10965
7 years ago
Scott Lahteine 7ba5afff01
Allow FAN_PIN override, pins cleanup (#10956) 7 years ago
Scott Lahteine e7623b5788 Restore Z_PROBE_PIN to pinsDebug_list.h 7 years ago
Scott Lahteine c16e41e9e6 STM32F4 pins cleanup 7 years ago
Axel ae322e0c54 [2.0.x] Add GTM32 Pro VB support (#10898) 7 years ago
Scott Lahteine d259070980 Clean up trailing spaces from vim, etc. 7 years ago
Scott Lahteine c68b7b3913 Update Fan 2 and E0 Auto Fan pins for Trigorilla 7 years ago
Axel bbd09a99f1 32 bit boards classification cleanup (#10818)
- Ordering and match classification between `boards.h` and `pins.h`
- Check `pins.h` environments
7 years ago
Bob Kuhn 62e2987488 add AT90USB support & add items to popup menu (#10779) 7 years ago
Scott Lahteine c173a31060 Fix some compile warnings 7 years ago
Scott Lahteine a1062eec5b
Better handling of DELAY_NS and DELAY_US (#10716)
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
7 years ago
Scott Lahteine fe5c308872
Correction to Printrboard SDSS pin (#10677)
Co-Authored-By: Simon Swenson <simon-swenson-8351@users.noreply.github.com>
7 years ago
Bob-the-Kuhn 410b023b50 [2.0.x] Add Viki support to RAMPS_FD_V1 (DUE) (#10598) 7 years ago
Bob-the-Kuhn f973ff49ae [2.0.x] MKS SBASE - Separate SD_DETECT for LCD and on-board SD cards (#10557) 7 years ago
Bob-the-Kuhn 00dfaae8df [2.0.x] Platformio - automate build & environment selection (#10503) 7 years ago
Scott Lahteine 0e450df6a2 MKS OLED support for RUMBA
Based on #10519

Co-Authored-By: Alex <alex18881@users.noreply.github.com>
7 years ago
Scott Lahteine f423e54f77 Strip trailing spaces 7 years ago
Marcio Teixeira 10a25f733e Add SENSORLESS_HOMING to Archim 2.0 (#10500) 7 years ago
Alexey Shvetsov ad58b626a3 Fix pin mappings for Viki2 on Azteeg X5 GT (#10487) 7 years ago
Scott Lahteine b6747c742a Cleanup AZTEEG_X5_GT pins for VIKI
What should the SD detect and SDSS pins be? Followup soon on #8138
7 years ago
Scott Lahteine 186d71b361 Complete CREALITY_ENDER revert 7 years ago
Scott Lahteine 2be5fe5ddf Split TRIGORILLA into 1.3 and 1.4 7 years ago
Scott Lahteine 80e29492c6 TRIGORILLA => TRIGORILLA_13 7 years ago
Scott Lahteine dea686cf55
Define short pin names in fastio for STM32 (#10461) 7 years ago
Scott Lahteine 4f184ba5da
[2.0.x] Add BOARD_MKS_BASE_15 with digital micro-stepping (#10454)
* Add BOARD_MKS_BASE_15 with digital micro-stepping
* Rename MKS_13 to MKS_GEN_13
7 years ago
Karl Andersson 428c54f2ad [2.0.x] HAL for STM32F4 (#10434) 7 years ago
Chris Pepper cc6d41e1d3 Use a macro for HAL header redirection (#10380) 7 years ago
Scott Lahteine 472ab0cc24 Tweak RAMPS SDSS pins 7 years ago
LichtiMC b94c8defee Provide additional information about SMART-RAMPS board (#10353) 7 years ago
Scott Lahteine 6f8e228880 Add RESET_PIN to pins_RAMPS_SMART.h 7 years ago
Lenbok 0e8242180d Chamber temperature monitoring and auto fan control.
This is an initial cut for feedback, updated for 2.0.x.

Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?

Chamber temperatures are not reported on the LCD in any way.

When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.

As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
7 years ago
Bob-the-Kuhn ab715c70d1 TMC SPI sanity-check and pins debugging (#10324) 7 years ago
Marcio Teixeira 9356cf648f Added support for Einsy Retro
http://reprap.org/wiki/EinsyRetro
7 years ago
Scott Lahteine f68b4265a6 Fix a probe pin definition 7 years ago
Scott Lahteine 4a23069de9 Fix Ender 4 / CR-8 compilation
- Assign 243 (like EFB) as Ender-4/CR-8 board ID
- Add to `Makefile`
- Add to `pins.h`
7 years ago
Scott Lahteine a9f94f260a Some RADDS pin updates 7 years ago
Scott Lahteine d573a2cada Fix pins_RAMPS.h for 32-bit platforms
Followup to 436e5b7
7 years ago
Scott Lahteine a97624dd81 Allow pinsDebug "Analog in" long int 7 years ago
Scott Lahteine 436e5b7ea3 Apply spacing in pins files 7 years ago
Bob-the-Kuhn 7308ef7809 Add conditional, give DUE SPI a unique name, fix compiler warnings (#10168) 7 years ago
Scott Lahteine c6ff39cc14 Spacing cleanup 7 years ago
Scott Lahteine 9e9e29ddf8 Einsy: Regular endstops and BLTOUCH pins
Based on #10131
7 years ago
Scott Lahteine 6689884910 Easier override of ST7920 LCD timing 7 years ago
Scott Lahteine 374ea49be9 Revert marlinAnalogInputToDigitalPin 7 years ago
Scott Lahteine 18de11c1ea Followup to auto-assign of dual axis CS pins 7 years ago
Scott Lahteine dd19e74476 Cleanup trailing whitespace
@Bob-the-Kuhn — Please set your git options to remove trailing whitespace on commit.
7 years ago
Scott Lahteine d385b9aac7
Auto-assign CS pins for X2, Y2, Z2 (#10057)
Fixes #9211
7 years ago
Bob-the-Kuhn 0d8c15c01f restore PR 9661 files & V1 fix 7 years ago
Bob-the-Kuhn bf59a4a6df
Revert "[2.0.x] DUE compatibility with shared SPI LCDs, USB mass storage, add pin defs & update examples\MakerParts\Configuration.h" 7 years ago
Scott Lahteine 239902f861 Fix E2END and add EEPROM to Smart RAMPS
Reference #9983
7 years ago
Bob-the-Kuhn 914bb80bde removed SDSS init
added device & comm drivers for shared SPI LCDs

mistyped some updates in ultralcd_impl_DOGM.h

remove unwanted changes in onfiguration.h

still can't type

Update HAL_LCD_class_defines.h

include USB mass storage & misc
7 years ago
Scott Lahteine 6d7f4f84e2
Add board MKS_BASE_HEROIC (#9926)
Followup to #9008

- Don't define micro-stepping pins for boards that lack them.
- Allow setting of 128 microsteps with `M350`.
7 years ago
Ben Lye e2df286444 Update pinsDebug.h (#9874)
Fix display of analog input value.
7 years ago
Bob-the-Kuhn c1f4112bdc [2.0.x] Add 1284 support & misc. bug fixes (#9864) 7 years ago
Scott Lahteine c471389afb
Add Einsy Rambo pins (#9850) 7 years ago
Ben Lye 461cb22069 Fix Zonestar / ADC keypad with RAMPS. (#9840) 7 years ago
Scott Lahteine 0bc4c216ac Patch up pinsDebug pins 7 years ago
Scott Lahteine ae1a2ff16f Pins parity with 1.1.x 7 years ago
Scott Lahteine e0227f2110 Fix *_CS_PIN for RAMPS_FD
Fix #9778
7 years ago
Scott Lahteine 5f8b2c2ff0 More descriptive environment error message 7 years ago
Scott Lahteine 63bc6ade4f Fix pinsDebug compile error 7 years ago
Scott Lahteine eb182c08af
Merge pull request #9733 from thinkyhead/bf2_random_fixup_branch
[2.0.x] Drop HAL_timer_set_count
7 years ago
Kevin 03b48df7bb RADDS: Add EEPROM Size (#9737)
needed for UBL
7 years ago
Scott Lahteine 12c5fdfdb5 Fix CYCLES_PER_MICROSECOND conflict on STM32F1 7 years ago
Scott Lahteine aef9e036bf More overridable FIL_RUNOUT_PIN 7 years ago
Scott Lahteine a6563df705
Sync pinsDebug_list.h between 1.1.x and 2.0.x (#9693) 7 years ago
Scott Lahteine bab0e975c8
The ENDER can use BOARD_MELZI_CREALITY (#9692) 7 years ago
Scott Lahteine da7c51d820 Space out some pins lines 7 years ago
Bob-the-Kuhn e05673a379 [2.0.x] VIKI2 & RE_ARM changes (#9686)
* VIKI2 & RE_ARM changes

1. Remove `DISABLED(SDSUPPORT)` from ST7565 in `ultralcd_impl_DOGM.h`. These LCDs share pins with the SD card and can run at the SD card rates.

2. Add SDSS definition to `pins_RAMPS_RE_ARM.h`.  Apparently the SDSS definition in `pins.h` is being processed before the one in `spi_pins.h` which resulted in not being able to read the SD card.
7 years ago
Scott Lahteine ff90cb409e No space for E2 with ReARM+RAMPS
Addressing #9474
7 years ago
Scott Lahteine c49844df66 !ENABLED => DISABLED 7 years ago
Scott Lahteine 378867d894 Update PB Rev.F pins 7 years ago