b1f739e27b
CR10_STOCKDISPLAY support in Bigtreetech SKR ( #13516 )
6 years ago
5679fae11e
UltraLCD enhancements (lower fan resolution, backlash menu) ( #13519 )
6 years ago
f0d14b83bc
Save/restore Relative modes in Power-Loss Recovery ( #13501 )
6 years ago
c6466c23fe
Silence signed/unsigned comparison warning. ( #13508 )
6 years ago
7240e3a68f
Allow G26 with no heated bed ( #13511 )
6 years ago
6d9aaca082
Fix compilation error for MKS Robin ( #13506 )
6 years ago
c6dbe6e9d6
Fix Teensy 3.5/3.6 __get_primask ( #13514 )
6 years ago
e40636a7c1
Replace digitalPinHasPWM with HAS_TIMER ( #13520 )
6 years ago
b46ca9aa94
Less timely comment, tweak conditions
6 years ago
eb91f08725
Update descriptions and dont call unneeded functions
6 years ago
fe346cd4d1
Fix DEBUG_EEPROM_READWRITE compile error ( #13492 )
6 years ago
e3ab54753b
Add extra Linear Advance factors ( #13490 )
6 years ago
ffc2c2d7c5
Move FAST_PWM_FAN code to HALs ( #13491 )
6 years ago
263f8edff8
Disable volumetric extrusion during G26 ( #13479 )
6 years ago
6bd0a0be97
Relocate DUE Stepper ISR to TC0,2 ( #13481 )
6 years ago
13a12f8a87
Fix UBL mesh editor on delta ( #13478 )
6 years ago
d2e0c03afb
Remove trailing whitespace
6 years ago
7462fe3068
Fix compile error, squelch warnings ( #13487 )
...
- Fix path to `bedlevel.h` include file
- Add default to `case` statements to suppress warnings
6 years ago
0d3ea59bcf
Add pins for Dual Z UART on SKR 1.3 ( #13474 )
...
Fix #13470
6 years ago
ef3b93daa1
Fix STM32F1 SD-based EEPROM emulation ( #13475 )
...
If `openFile` is given `true`, then it has read-only access. Because all the writing occurs on the next line, this breaks SD card as EEPROM.
6 years ago
aacc1148b0
Fix M106 for index > extruders ( #13473 )
6 years ago
c5e96544b5
Fix vtool compiler warning ( #13476 )
6 years ago
02dc72acb6
Disable ABL when leveling corners ( #13471 )
6 years ago
d96f7d6068
Minimum segments for G2/G3. Better for small arcs. ( #13466 )
6 years ago
380c771988
Handle word-padded flash-based eeprom (STM32F1)
...
Fix #13445
6 years ago
32332bcd03
Proceed with Teensy 3.5/3.6 HAL ( #13450 )
6 years ago
407202cc0f
Fix BLTouch pre-3.0 compatibility ( #13454 )
6 years ago
a0ca98f699
Additional ExtUI features ( #13449 )
6 years ago
a8fa275dc6
Fix Fan 0 responding to all fan speeds ( #13444 )
6 years ago
5eeffab5e5
Fix BLTouch Menus ( #13441 )
6 years ago
d8329d858d
Default argument to defer_status_screen
6 years ago
9562a02c5a
Update Italian language ( #13440 )
6 years ago
70e6a3db8a
Add LEVEL_CORNERS_HEIGHT to LEVEL_BED_CORNERS ( #13439 )
6 years ago
f3cf95a937
Update Slovak language. ( #13435 )
6 years ago
144018736a
Use USES_Z_MIN_PROBE_ENDSTOP
6 years ago
5b2c37d6c1
Followup to BLTouch ( #13422 )
6 years ago
3fb8489ae3
EXTUI and UBL compilation fixes ( #13420 )
6 years ago
b376c7e374
Group DISABLED items
6 years ago
58bca67883
Unify status scrolling further
6 years ago
c4443f885e
finishstatus => finish_status
6 years ago
691e5c3bb8
BLTouch V3.0 support ( #13406 )
6 years ago
49cf92dc36
Extended condition macros ( #13419 )
...
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
6 years ago
d20eab4f83
Fix macro in set_color() ( #13417 )
6 years ago
59353546e8
Fix BUTTON_EXISTS and misplaced comma ( #13411 )
...
Fixes #13410 and redeclaration of `BUTTON_EXISTS`
6 years ago
09eb30dc05
IDEX Mirror mode based on Formbot / Vivedino Symmetric mode ( #13404 )
6 years ago
5c1aa5162d
Adjust M206 output in M503 for DELTA
6 years ago
ad8b82d054
Fix KILL_PIN assignment for MKS_MINI_12864
...
According to #13397
6 years ago
3a916b4ef2
Create bresenham.h
6 years ago
5d3928cb01
PWM is not defined on Arduino Core STM32 ( #13405 )
6 years ago
9a515cbd32
Fix Pause Print message and behavior ( #13394 )
6 years ago
f5bcc00570
Unify debugging output with debug_out.h ( #13388 )
6 years ago
cc8a871705
Add capability string CHAMBER_TEMPERATURE ( #13391 )
...
Reference: #13380
6 years ago
67bee06e43
No patch needed for non-libmaple analogWrite
...
See https://github.com/pinchies/Marlin/pull/1#issuecomment-471388743
6 years ago
f89b375fb9
Fixes and improvements for PWM pins ( #13383 )
6 years ago
87162658c4
Fix and improve software endstops ( #13386 )
6 years ago
6214c997c0
Remove includes of <binary.h>
6 years ago
4555ae448f
Fixups for ESP32
6 years ago
a5ea3e2f15
Fix hotend offset on switching toolhead change
...
See commentary at #11623
6 years ago
8e0ac93d60
Fix 'UNUSED redefined' compiler warning ( #13387 )
6 years ago
0278ad0a6d
Add ESP32 WiFi interface ( #11209 )
6 years ago
c03df89921
ExtUI Mesh Leveling Extensions ( #13363 )
6 years ago
050eac03af
Single X Duplication Extension ( #13373 )
...
* Multi-nozzle selective duplication
* Use a bit-mask, reduce stepper_indirection.h size
* Tweak the multi-nozzle duplication description
* Use 'S' as a bool in M605
* Add HAS_DUPLICATION_MODE conditional
* Remove '_MODE' from the option name
* M605 in the style of Stacker M280
* Also include direct mask style (P)
6 years ago
ad91476d26
Fix USEABLE_HARDWARE_PWM
6 years ago
d63da4592d
Tweak to SCARA_move_to_cal
6 years ago
51ff5b68fa
Clean up fastIO ahead of PWM patch
6 years ago
388babbcea
Tweak SERIAL_PRINTF
6 years ago
d94e077901
Apply HAS_HOTEND_OFFSET where needed
6 years ago
11d6a939df
Always define axis_unhomed_err
6 years ago
10c8c034bd
Allow both encoder and ADC keypad ( #13355 )
6 years ago
31ff7da7ac
Add missing CHAMBER options (for M141) ( #13371 )
6 years ago
0375e92847
Followup to serial rework
...
As mentioned in #13370
6 years ago
013bb469ca
Fix compilation for STM32F1 with no SDIO ( #13366 )
6 years ago
e52bcc9408
Limit top bed temp to BED_MAXTEMP - 10
...
The chances of a 10° overshoot is pretty minimal.
6 years ago
98b55421a5
Clean up some temp config
6 years ago
785a7028bf
Followup to 'volatile' patch ( #13369 )
...
Originally #13344
6 years ago
aa1d587128
Some LCD code cleanup
6 years ago
fa11427ec6
Remove obsolete LCD_CONTRAST
6 years ago
4df9509ead
Add support for printers with inverted fan pins ( #13362 )
...
Add support for printers with inverted fan pins by adding `#define FAN_INVERTING 1` to `Configuration_adv.h` and modifying the fan write macros.
6 years ago
1f7e220387
Make HAL ISR macros function-like
6 years ago
e3ce346f24
Report position to host in Nozzle::park
6 years ago
77b4176152
Use lib include for bit_constants.h
6 years ago
3419099f0a
Clean up whitespace
6 years ago
4c43e6c48b
Fix "spontaneous heating" issue (WRITE bug) on STM32 ( #13356 )
...
Should fix "spontanous heating" problems due to order of operations error. Error occurs at least with ststm32 v5.1.0 in PlatformIO.
6 years ago
b824a517aa
Add G38.4 and G38.5 ( #13348 )
6 years ago
e4d080e63c
Reset after kill with a button on the KILL_PIN ( #13091 )
6 years ago
c36989c39e
Fix chamber temperature measurement ( #13350 )
6 years ago
12503fce06
Followup to wait_for_user fix
6 years ago
33a08fc6f7
Fix typos from temperature rework
...
Followup to #12201
6 years ago
2efbcc90c5
Fix wait_for_user compile error ( #13352 )
6 years ago
60e82e3929
Send notifications to ExtUI for M0/M1 ( #13344 )
...
- Send notifications to ExtUI for M0/M1
- wait_for_user can be non-volatile (not changed by interrupt)
C / C++ compilers don't optimize away reads of non-volatile variables when a function call is used between accesses, because *any* variable could be changed by the function call. Since `wait_for_user` can't be changed without a function call, it should be non-volatile so the compiler can optimize away cases where it is read more than once without an intervening function call.
6 years ago
00fc43144a
Follow up fixes to various PRs. ( #13334 )
...
- Ensure `MarlinUI:get_progress` is defined for `ExtUI`.
- Fix for `BACKLASH_SMOOTHING` with small segments.
`BACKLASH_SMOOTHING` with extremely small segments failed to fully correct due to the correction factor being rounded down. Rounding up ensures the entire backlash will converge to zero even for small segments.
- Add pinout for the beta revision `EINSY_RETRO`.
- Update soft endstops with tool offsets (for toolchange et. al. move clamping) (#12568 )
6 years ago
c7d618b4d9
Fix SERIAL_ECHOLNPAIR
...
Fix #13333
6 years ago
d54741eda8
Update some G26 plausible values. Add speed control. ( #13330 )
6 years ago
fb3302feda
Fix STM32F1 Serial and ADC pins ( #13331 )
6 years ago
dbead66988
Allows user to set (almost) any PWM frequency ( #12638 )
6 years ago
afbec5ff7e
Have ExtUI::getProgress use ui.get_progress ( #13328 )
6 years ago
645ca7af7a
M141 Heated Chamber, Temperature rework ( #12201 )
6 years ago
44571775bd
Further support for 6 extruders
6 years ago
893ee68b52
Clean up trailing whitespace
6 years ago
39f1222060
One fewer G29 error string
6 years ago
drzejkopf