98c2fc4e42
Endstops fix followup ( #12423 )
...
Followup to #12413
6 years ago
f19fd642ce
Updates to Formbot T-Rex 2+ configuration files ( #12422 )
...
Updates to Formbot T-Rex 2+ configuration files
6 years ago
cda5ef08fa
Debug of G2-G3 for UBL ( #12386 )
...
Changes only affect UBL. Everything else is left alone.
6 years ago
9ad3aed0ef
Fix tool-change for MIXING_EXTRUDER with < 2 virtual tools ( #12417 )
...
Fix #12416
Better handling of `ENABLED(MIXING_EXTRUDER) && !MIXING_VIRTUAL_TOOLS > 1` - to not fall through to the general case. Fix compiler warnings for `#elif EXTRUDERS < 2`.
6 years ago
d631267548
Refine endstops fixes ( #12413 )
...
When endstops/probe are enabled `ENDSTOP_NOISE_THRESHOLD` calls to `update` are required to properly re-sync endstops/probe status.
6 years ago
0ee1a92971
Group status methods, share reset_status with Extensible UI ( #12414 )
...
* Group status methods, share reset_status with Extensible UI
* Move common DOGM code to headers
6 years ago
690c4e8457
Clean TLM trailing whitespace
6 years ago
143b2896e0
Add M412 to enable/disable filament runout detection ( #12406 )
6 years ago
a163c89c6a
Followup to 50af1d1
6 years ago
be6271767f
Fix BABYSTEP_ZPROBE_OFFSET ( #12408 )
...
Fix #12399
Did not compile without `WATCH_HOTENDS || WATCH_THE_BED`.
Add condition to include "../../module/temperature.h".
6 years ago
50af1d1e08
Differentiate translated On/Off from Serial ON/OFF
6 years ago
df907a905f
Update UBL comments for debug change
6 years ago
da17f8ad37
For now (!) don't synchronize in M204 and M205
...
See if this has any deleterious effect on motion planning by slicers that inser their own jerk and acceleration controls. The problem I see is that these settings can take effect on blocks already in the planner, and the only way around this would be to shadow these settings in planner blocks and use the shadowed settings in the planner.
6 years ago
a3923424c7
Clean up LCD width/height determination
6 years ago
a0c795b097
Encapsulate common display code in a singleton ( #12395 )
...
* Encapsulate common LCD code in a singleton
* Depend more UBL code on UBL_DEVEL_DEBUGGING
- Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
6 years ago
9da6809ac3
Adjust some comment spacing
6 years ago
471f403a67
Reduce code size with plain inlines
6 years ago
30a49f5ee2
Apply extra condition to LCD_PROGRESS_BAR
6 years ago
4e0c935959
Update HAL and libs formatting
6 years ago
47483e8c17
Update Raptor config
6 years ago
6093df11dc
Allow G26 to use the active extruder ( #12387 )
...
* Make lcd_quick_feedback argument optional
* Add click_to_cancel option to wait_for_hotend/bed
* Have G26 use the active nozzle and wait_for_hotend/bed
* Use wait_for_release in UBL G29
* Add 'T' parameter to G26 for an initial tool-change
6 years ago
4260282df7
Tevo Little Monster example configuration ( #12370 )
6 years ago
bed15fcd81
Tweak 'echo_not_entered' used by MBL's G29
6 years ago
c239131ff5
Use 'serial_spaces' in 'print_2d_array'
6 years ago
56150ec030
Add reference comments to MeshLevelingState
6 years ago
24c5e57bb6
Update German language ( #12379 )
6 years ago
fd7fd55662
Solve endstops issues ( #12382 )
...
- Partially reverts #11900 and tries to solve #12336
6 years ago
78ccedd6a8
Fix M91x sanity-check to permit TMC2660
...
Fix #12362
6 years ago
b60abc7c37
[2.0.x] Macro G-codes ( #9365 )
6 years ago
ccdbf20f60
Update Italian language ( #12368 )
6 years ago
d08847b1a6
Update Slovak translation ( #12376 )
6 years ago
7665dff58b
No error on T0 with single-extruder and fix MIXING_EXTRUDER virtual tools ( #12375 )
6 years ago
4ed6397e5d
More comprehensive NO_LCD_MENUS ( #12367 )
6 years ago
9c8f083d6c
Extend pins errors to include the processor
6 years ago
525ea554a1
Remove obsolete comments
6 years ago
ef724edd80
Apply HAS_LCD_MENU in EEPROM code
6 years ago
b169320a03
Clean trailing whitespace
6 years ago
81b1e9d272
Fix up xdiff, ydiff, zdiff in tool change
...
Followup to #12137
6 years ago
6471a75a22
Combine more tool-change variables ( #12137 )
6 years ago
147e270208
Restore GTM32_PRO_VB temp and heater pins
...
Undo #12345
6 years ago
8def25e475
Set CUSTOM_MACHINE_NAME for some configs
6 years ago
812f6a7dd7
Fix Resume from SD Pause
...
In reference to https://github.com/MarlinFirmware/Marlin/pull/12098#issuecomment-436231690
6 years ago
4f72e041f2
Use card.stopSDPrint() for completeness
6 years ago
488a17b3f5
Use IS_SD_PRINTING() more
6 years ago
4dbaa6369f
Fix const pointer assignment compile error ( #12350 )
6 years ago
959ed32636
Update Italian language ( #12352 )
6 years ago
812bfec65e
Update Slovak translation ( #12354 )
6 years ago
1624722566
Update German translation ( #12355 )
6 years ago
e574f01568
More advanced pause tweaks ( #12356 )
...
* Followup to LCD_TIMEOUT_TO_STATUS=0
* Make continuous purge screen fit 20x4
* Unify purge message modes
* Preserve last-set pause header mode
6 years ago
5a470d4a49
Apply some tool-change cleanup
6 years ago
34ea458667
Fixed advanced pause messages ( #12353 )
6 years ago
4c5ca89d8c
Show the appropriate pause message ( #12348 )
6 years ago
8517d5f915
LCD menu code refactoring and cleanup ( #12308 )
6 years ago
b3b4e6dc45
Change Marlin debug flag names to fix conflicts ( #12340 )
...
In reference to #11000
6 years ago
f7e682eeee
Update Italian language ( #12344 )
6 years ago
a813900fce
Add Geeetech Rostock 301 config, update GTM32 Pro VB pins ( #12345 )
6 years ago
04f173790f
Remove trailing whitespace
6 years ago
c536ee1122
Clean up bq Zum Mega 3D pins
6 years ago
c31e1735dd
Restore LPC1768_PIN_INTERRUPT_M, apply to Z3
...
- In reference to #12166
6 years ago
93d5b945dd
Hide mesh editing until a valid mesh exists
6 years ago
f34f09c821
Update German language ( #12336 )
6 years ago
eefd7676a3
Updated slovak translation ( #12338 )
6 years ago
486f2a66a9
Fix MBL XY parameter error messages
...
Fix #11522
6 years ago
2613ddf61c
Fix "circle"
6 years ago
b779b42ffd
Prevent current step-down going negative
...
Addressing #11348
6 years ago
427bc64ba1
G28 O respects HOME_AFTER_DEACTIVATE
...
Addressing #11271
6 years ago
3866aeac52
Clean up ENCODER_RATE_MULTIPLIER config
6 years ago
498dfa291e
Update and fix CHDK
6 years ago
fed84f2961
Use multiplier edit item for mesh point editing
6 years ago
d5ab4cd22a
Provide a default for Z_PROBE_LOW_POINT
6 years ago
3cbc3ecdd7
Fix 'M43 T' to use 'L' as last pin
...
- The documentation is correct. The code was wrong.
6 years ago
1769249876
Recommend keeping endstops off
6 years ago
5182eaf661
Fix endstops enable behavior during probing
...
Fix a bug introduced in #9582
6 years ago
07a0822ebe
M420 support in MARLIN_DEV_MODE
6 years ago
63be48ada6
Add MESH_EDIT_MENU to example configs
6 years ago
82ff7c6542
Add a mesh edit menu for MBL / ABL-Bilinear
6 years ago
44fa7fb18c
Cleanups for leveling-related code
6 years ago
cc2bc67440
ENABLED(NEWPANEL) => HAS_LCD_MENU
6 years ago
fc84878cba
MSG_UBL_EDIT_MESH_MENU => MSG_EDIT_MESH
6 years ago
cd066bfeba
Extend error messages for E factors sanity-checks
6 years ago
c10edb0998
Update, correct sanity-checks for up to 6 extruders ( #12333 )
6 years ago
0c85869c26
Clean up file endings
6 years ago
b99f0776d6
Clean up some U8G files
6 years ago
8014e1cc9d
Allow disable of LCD_TIMEOUT_TO_STATUS (when 0)
6 years ago
bd05816fd8
Update Italian language ( #12327 )
6 years ago
3c21483c88
Provide DOGLCD SPI pins for MKS SBASE + VIKI
6 years ago
e0956bb572
Drop 'register' storage specifier
6 years ago
c04cf127f7
Fix EEPROM servo angles init, section grouping
6 years ago
9c0e05552e
Suppress some compile warnings
6 years ago
176654791e
Use board-specific or platform SPI pins in HAL_STM32 ( #12323 )
6 years ago
60dbd8161c
Fix VMAX editing
...
Fix #12326
6 years ago
b7ca93ba37
Remove dead comment
6 years ago
608be966d7
Add servos to pins_FYSTEC_F6_13.h
6 years ago
67b22760d9
Return to status to show manual deploy/stow messages ( #12324 )
6 years ago
f5e8e8b53d
Fix broken LPC176x build ( #12317 )
...
* Fix broken LPC176x build
* Add UBL+HD44780 test for LPC1768
6 years ago
f5eab912ed
Apply #pragma once, misc cleanup ( #12322 )
...
* Apply #pragma once in headers
* Adjust some thermistors formatting
* Misc cleanup and formatting
6 years ago
8696f882a9
Merge pull request #12313 from thinkyhead/bf2_scara_home_offset
...
Revive SCARA home offset (not fully implemented)
6 years ago
56d2dcb184
Use first_page flag in place of page.page == 0
6 years ago
d1ff22b983
Revive SCARA's home offset (unimplemented)
6 years ago
2c9586be0c
Clear up HAS_WORKSPACE_OFFSET meaning
6 years ago
6e3caf23b6
IS_DELTA => ENABLED(DELTA)
6 years ago
19f49db96f
Tweak / reduce menu items
6 years ago
e4cf175163
Synchronize on M204, M205 ( #12302 )
...
* Add parser.seen for multiple parameters
* Fix M666, use !seen for report
* Synchronize on M204, M205
6 years ago
5ba6607181
Fix keypad-related compile error ( #12306 )
6 years ago
2fb2e286ee
Followup to #12256
6 years ago
3eb9838dca
Simplify TMC sanity-checks
6 years ago
f5b31e218d
Followup to #12082
6 years ago
31c28d0dd2
Drop pgm_read_*_near and let headers choose ( #12301 )
...
- Drop `pgm_read_*_near` and let headers choose.
- Define `USE_EXECUTE_COMMANDS_IMMEDIATE` as a conditional.
- Add `process_subcommands_now` for SRAM-based commands.
6 years ago
fce150f094
inline static => static inline
6 years ago
323c088356
Restore LED light color after pid tuning ( #12082 )
6 years ago
9f77df2590
Followup to menu refactor. TMC warnings, sanity. ( #12288 )
...
- Followup fixes for menu refactor
- Fix TMC sanity checks, unused var warnings
6 years ago
cafabf2055
Implement DELAY_NS with CYCCNT on Cortex-M7 ( #12283 )
6 years ago
f5498168ae
Ensure PENDING/ELAPSED use a 32-bit integer
6 years ago
6e041b9c61
Use blink to show more info on LCD ( #12256 )
6 years ago
eb5600acd2
Add parentheses to LCD_CLICKED
6 years ago
42f8b6c530
Make M125 work with SDSUPPORT ( #12289 )
6 years ago
f319087372
Followup to #12293
6 years ago
74bbb13008
Fix Mixer calculations for 32-bit processors ( #12293 )
6 years ago
549d11225a
Add to description of Z_STEPPER_AUTO_ALIGN
...
In response to #12272
6 years ago
2cff0d1f39
Move menu_level_bed_corners to its own file
6 years ago
44f2a82a56
Move axis_homed, axis_known_position to motion.*
6 years ago
946cf8b453
EEPROM read code grouping
6 years ago
f2adb4b9cc
Update German language ( #12280 )
6 years ago
484ca68228
Fix misplaced parentheses ( #12284 )
6 years ago
1d366db764
Tweaks to CR-10S configuration
6 years ago
b5d7f69b51
Followup to #12249
6 years ago
b780b69c62
Use font ascent and descent for line positioning ( #12224 )
6 years ago
9cd3529108
Organize language data, fix Korean and Danish
6 years ago
66d44c72c3
Add fast binary file transfer to SD card option ( #12249 )
6 years ago
72d8adfd1e
Cleanup and refactor EXTENSIBLE_UI ( #12227 )
...
- Add `axis_t`, `extruder_t`, `heater_t`, and `fan_t` to eliminate ambiguity, improve type safety.
- Regularized getter/setter argument order and naming.
- `setAxisPosition` no longer stacks moves in the buffer, allowing it to be called repeatedly on each touch ui tap.
- Implement better manual moves for `EXTENSIBLE_UI` (#12205 )
- Calling `setAxisPosition_mm` no longer buffers the entire move to the new position, but instead causes small moves towards it to be made during the idle loop. This allows the user to adjust the destination even after the move has started and makes the UI feel much more responsive.
- As suggested by @ejtagle, the new code keeps the planner buffer full to ensure smooth motion without stops and starts.
- Change `En`, `Hn` and `FANn` to zero-based indices.
- Labels consistent with the rest of Marlin code.
6 years ago
1946f729fd
STM32 FastIO using register access ( #12276 )
6 years ago
56057bcecd
Fix lcd_impl_status_screen_1
6 years ago
4ed579cafc
Americanized English spelling
6 years ago
9e663a624b
Apply #pragma once to configuration files
6 years ago
98c32d8df1
Fix a config endif label
6 years ago
3583e2b449
Followup to Menu Refactor ( #12275 )
6 years ago
5536228359
G34 Auto-align multi-stepper Z axis ( #11302 )
6 years ago
f9b80e7217
Make getfilename_sorted standard for listings
6 years ago
5ead026967
Fix menu_temp_xx_filament_change menu items
6 years ago
d632e44c8c
[Merge] Refactor LCD menus / screens ( #12199 )
6 years ago
1f9806875c
Update German language ( #12261 )
6 years ago
63ce8baa55
Fix Teensy 3.5/3.6 ADC access for ADC1 ( #12258 )
6 years ago
3a935fd72b
Reduce repetition in menu edit items
6 years ago
b063b1b722
Reorganize includes and declarations
6 years ago
43cf913048
Move SD Card Menu to its own file
6 years ago
0161d3f733
Move Custom User Menu to its own file
6 years ago
3b0d2330b6
Move Delta Calibrate Menu to its own file
6 years ago
6896847210
Move LED Menu to its own file
6 years ago
9cd5471202
Move Job Recovery Menu to its own file
6 years ago
9f11e0284c
Move Filament Change Menu to its own file
6 years ago
d87ab3ed20
Move Advanced Settings Menu to its own file
6 years ago
587a64d80c
Move Bed Leveling Menu to its own file
6 years ago
96f313fb41
Move Info Menu to its own file
6 years ago
423ab029b2
Move Temperature Menu to its own file
6 years ago
489017995e
Move UBL Menu to its own file
6 years ago
a489c9fa52
Move Motion Menu to its own file
6 years ago
3a9ad9f2b1
Move Configuration Menu to its own file
6 years ago
143d4ec043
Move Tune Menu to its own file
6 years ago
829effc1fe
Move Main Menu to its own file
6 years ago
37ff663b02
Convert LIGHTWEIGHT_UI to CPP
6 years ago
a964f098b3
Make dogm status screen a CPP
6 years ago
8055ed24ff
Move font data to a subfolder
6 years ago
774a6e8199
Drop TALL_FONT_CORRECTION
6 years ago
c825c419d4
Convert DOGM / HD44780 impl to CPP files
6 years ago
182b1405d9
LCD conditionals in configurations
6 years ago
2bf18950ab
Refactor LCD menus
6 years ago
ac5f2762b7
Use E_AXIS_N where possible
6 years ago
6fbc87301f
'G29 H' to set a centered square probe area (linear, bilinear) ( #12242 )
6 years ago
c1e8bd6add
Remove STM32 board-specific delays ( #12243 )
...
...and replace with delays for all HAL_STM32 boards.
6 years ago
3c9daf322a
MSG_CNG_SDCARD => MSG_CHANGE_SDCARD
6 years ago
4b7a0a5b39
Require TMCStepper 0.2.2 or newer
...
In reference to #12175
6 years ago
ab8425f1b5
Clean up PROBE_TRIGGERED_WHEN_STOWED_TEST ( #12232 )
6 years ago
3028a620af
Add RACK_AND_PINION_PROBE ( #12218 )
6 years ago
ad60f0691c
Add Creality3D RAMPS pins definitions ( #12229 )
6 years ago
5580773191
Use FastIO, sanity-check LPC SD options, apply formatting ( #12231 )
6 years ago
d015f746cc
Fix some compile warnings ( #12220 )
6 years ago
dacb5324e8
Fix display of Y on Graphical LCD
6 years ago
bf9dd4f4cf
Add helpers for custom text in menu items ( #12214 )
...
For some features it can be useful to write custom text in a menu item. This commit provides helpers to make this easier.
6 years ago
e8031b1152
Add Custom Microstepping options
6 years ago
fbfb48cce0
Indent a block
6 years ago
1a00d1bdaf
Add pullup to USB interrupt line
...
- A pullup on the INT pin is required when the pin is level-active
6 years ago
a07ac6312f
G0 feedrate may be fixed or variable ( #12172 )
6 years ago
53c535a0c1
Remove trailing whitespace
6 years ago
55dec02ca1
Allow X, Y, Z manual move when cold. ( #12209 )
6 years ago
7243101135
z_offset fix for deltas ( #12210 )
6 years ago
9613f00877
Fix getProgress_seconds_elapsed to return seconds
6 years ago
5d487ef40e
Fix null exception due to duration_t of zero ( #12207 )
6 years ago
a9061714f2
Update Italian language ( #12196 )
6 years ago
aebbb2359d
Fix IDEX homing X0 wrong direction ( #12200 )
6 years ago
0a549fd1f2
Fix EXTENSIBLE_UI compile errors ( #12206 )
6 years ago
a80ba8fc6e
Slovak translation update ( #12202 )
6 years ago
e48cbff10d
Fixed redefinition warnings of MSG_HOTEND_TOO_COLD. ( #12203 )
6 years ago
7a04eb3a8b
Fix some comment formatting
6 years ago
2f873a119f
Revert some UBL strings
6 years ago
a93e9e6e9b
Use preheat labels in place of PLA/ABS ( #12194 )
6 years ago
aa72884a6e
Enable use of SERIAL_PORT_2 on HAL_STM32 ( #12197 )
6 years ago
46360f18b4
Bring thermistor_75.h up to speed
6 years ago
e229b831fa
Customizable preheat labels
6 years ago
a553ab82e0
Add e index to _lcd_move_distance_menu
6 years ago
3a46212dd8
Better cold extrusion prevention in LCD menu ( #12189 )
6 years ago
fc31da1114
Implement custom delay/millis for EXTENSIBLE_UI ( #12188 )
6 years ago
3a3ab3391f
Return set_directions() to stepper.cpp ( #12182 )
...
Initial manual Z move can be negative if your stepper is inverted. Leads to bad situations for crashed or initially booted printers.
6 years ago
e5ae7a07d1
Suppress compiler warning
6 years ago
6ee2af5e2d
Simplify pins_TRIGORILLA_14.h ( #12162 )
6 years ago
d801f85963
Correct EEPROM read/write disparities. ( #12169 )
6 years ago
8d3a92fc4a
Followup to millis_t patch
6 years ago
44369d536a
Use millis_t where needed ( #12152 )
6 years ago
b641571098
Replace types.h with millis_t.h
6 years ago
eeef4e630a
Fix compile error in leds.h
6 years ago
9969c06cb5
Fix compiler warning
6 years ago
427c80119a
Hide some menu items when busy: fix typo ( #12164 )
6 years ago
55ac2f4c23
Fix filament runout for idex duplication modes ( #12168 )
6 years ago
b640b3b0d6
Define ST7920 delays for board ARMED ( #12161 )
6 years ago
2e5e689a7f
Fix kill() and ExtensibleUI ( #12160 )
...
* Fix to isPrintingFromMedia()
- isPrintingFromMedia() will now return true even if SD print is paused.
- isPrintingFromMediaPaused() allows UI to determine if the print is paused.
* Don't use _delay_us in minkill (#12145 )
- In HAL_DUE, _delay_us is simply an alias for delay, which causes the board to hang and subsequently reboot due to the watchdog timer.
* Shorten code with IFSD macro
6 years ago
b381cad399
Clean up trailing whitespace
6 years ago
9090065e9f
Move EXTRA_FAN_SPEED above FWRETRACT
6 years ago
4eb798dbdc
Add support for Arm'ed (STM32F4) board ( #12147 )
6 years ago
1fb9b299d4
Add M524 to abort SD printing ( #12155 )
6 years ago
d26d9d5b81
Tweak IS_SD_INSERTED
6 years ago
c6a5c74208
Add parentheses to SD macros
6 years ago
aa9202260d
Fix endstop when no interrupt ( #12158 )
6 years ago
8c02dd971b
Move disable_all_steppers to minkill
6 years ago
3847c08f7e
Disable heaters/steppers before message
6 years ago
71e19baf69
Fix kill => disable_all_heaters => print_job_timer.stop ( #12146 )
...
- Remove `print_job_timer.stop()` from `disable_all_heaters`
- Call `print_job_timer.stop()` for relevant `disable_all_heaters()`.
- Split up `kill()` for watchdog interrupt safety
6 years ago
4cc1c2627e
Update German language ( #12143 )
6 years ago
75a0d46edf
Fix compile warning re: LCD_INFO_SCREEN_STYLE
6 years ago
a81763c237
Pins E sanity check tweak
6 years ago
bc22641002
[2.0.x] Updated Italian Language ( #12148 )
6 years ago
eded90bf87
Updated Azteeg X5 Mini Wifi pins for onboard SD ( #12133 )
6 years ago
27a84fd021
Remove unused option in Anycubic Kossel config ( #12138 )
6 years ago
67a3c5a16a
Alternative info screen (Prusa-style) ( #12132 )
...
* Fix Z value display
* Add HAS_PRINT_PROGRESS
* Alternative Info Screen option
* Add LCD_INFO_SCREEN_STYLE to example configs
6 years ago
5b7dd553d3
Fix sd_mmc_spi_mem capacity; clean up USB code ( #12134 )
...
- Fix an error in the return value of `sd_mmc_spi_read_capacity` which was causing the host OS to read beyond the last sector in the card.
- Clean up the USB flashdrive code and add better debugging.
6 years ago
df768e7d8f
Followup to #12129
6 years ago
3c13c9e3e9
[LPC176x] Fix USEABLE_HARDWARE_PWM macro, cleanup multiple LED support ( #12129 )
6 years ago
a768df83cb
Remove stale variable ( #12136 )
6 years ago
c36773bffb
Update the Ender-4 example config ( #12131 )
...
- Enable filament change menu
- Enable bed-PID
- Enable s-curve acceleration
- Enable some menu items
- Update from Skorpi's new version
- Fix extruder steps, deactivate nozzle clean feature
6 years ago
9c71bff5e8
Update German language ( #12115 )
6 years ago
9deb23aa47
Add missing SerialUSB definition for STM32 HAL ( #12124 )
6 years ago
0519ef0802
Update pins for final RemRam v1.3 board ( #12125 )
6 years ago
3ec3872730
Single Z raise value for all tool-changing / parking ( #12090 )
...
* Universal tool-change Z lift
* Add TOOLCHANGE_ZRAISE to example configs
* Park/unpark changes to example configs
* Implement DEBUG_DXC_MODE
6 years ago
6bdbe3299e
Fix a comment
6 years ago
bc75eb2c64
Cleanup for HAL_spi_Due.cpp
6 years ago
d82bcdeea1
Make PULSE_STOP(E) conditional ( #12121 )
6 years ago
c90e26dfa6
fix normal extruder stepping ( #12118 )
6 years ago
96bbda5d48
remove confusing comment ( #12120 )
6 years ago
f98f4ac7ea
Fix and improve EXTENSIBLE_UI ( #12117 )
...
- Add methods to access print counter data
- Clean up some inconsistent method names
- Clear lcd status after filament change
- Implement `lcd_reset_status` so it works like UltraLCD
6 years ago
8bf596bd4c
RETRACT_ZLIFT => RETRACT_ZRAISE
6 years ago
056561df93
[2.0.x] Enhancements to FILAMENT_RUNOUT_SENSOR ( #12069 )
...
- Added FILAMENT_RUNOUT_DISTANCE_MM option
- Added FILAMENT_MOTION_SENSOR option
6 years ago
cce4931342
Clean up recent contribs
6 years ago
8b5e51c9aa
STM32F4xx modifications for HAL_STM32 ( #12080 )
6 years ago
Giuliano Zaro