2832 Commits (a6628f12cc8fa255544b14cb8cc41ed8e7eb71ff)

Author SHA1 Message Date
AnHardt f2c94b3298 tone will end automaticly 10 years ago
AnHardt c5e0e29d23 Add DISPLAY_CHARSET_HD44780_CYRILLIC as alternative in SanityCheck.h
and add some documentation - how to integrate a new font.
10 years ago
AnHardt b59e92ab99 Fix for #1946
Syntax error.
10 years ago
Wurstnase 61ae43f35e v <-> code_value 10 years ago
Wurstnase da0d91a79b max endstopp
no user will home to 0 with a max endstopp
10 years ago
AnHardt 3a27a78f9e Commented REPRAP_DISCOUNT_SMART_CONTROLLER again
and removed some tabs.
10 years ago
AnHardt 064f2b37d0 More Beeper clean up.
Centralised beep code to lcd_buzz().
From gcode_M300() and lcd_quick_feedback().

Enforced max. duration for M300 to 5 seconds.

Corrected description in 'Configuration.h'

LCD_FEEDBACK_FREQUENCY_HZ 0 gives now a silent delay of
LCD_FEEDBACK_FREQUENCY_DURATION_MS.
10 years ago
Wurstnase 92575cecca new timout/add adv_ok 10 years ago
AnHardt 671aaf2dc9 Minor fix for M300
Corrected wrong order of parameters.
10 years ago
Scott Lahteine d931220a65 Tweak comments 10 years ago
Scott Lahteine 47847765e2 Add M410 QuickStop command 10 years ago
Scott Lahteine a4ca87ba99 Merge pull request #1933 from bq/Fix_stray_in_configuration
Fixed compilation error "error: stray ‘\357’ in program"
10 years ago
Scott Lahteine 5e3bb4bdf3 Merge pull request #1931 from paclema/M303_echo
Added new PID autotune info, to make easy copy & paste results to marlin
10 years ago
Ivan Galvez Junquera b99e63a7bf Fixed compilation error "error: stray ‘\357’ in program" in several configuration files.
Introduced in commit 697ee2dc and later spread to other files.
10 years ago
paclema 581685a231 Added new PID autotune info, to make easy copy & paste results to marlin 10 years ago
Chris Palmer 483384aaa4 Fixed faulty comment merge 10 years ago
Chris Palmer cc6b7cf3ce Fixed some comment spellings. 10 years ago
Chris Palmer e4595fa24a Fixed jump in speed when using high accelerations on axes with lots of steps.
I.e., when acceleration * steps per mm > 2,000,000.
This was done by changing MultiU24X24toH16 to take a 32b bit operand.
Removed the claim that stepper.cpp uses the Leib algorithm.
10 years ago
Wurstnase b09a957fce make 'wait' optional and mark as workaround 10 years ago
Scott Lahteine 63b98b8280 Raise Z for M401 and M402 10 years ago
wurstnase d69da22f7c last_command_time inside get_command() 10 years ago
Scott Lahteine 53be0f3399 Babystep delay 2us 10 years ago
wurstnase 574e2d856e remove config 10 years ago
paclema cde5eee2a5 Removed unnecessary comments 10 years ago
paclema e1b69db6d1 Fixed M48 mismatch between n and P parameter on documentation 10 years ago
CONSULitAS 1de9b568db Example Configuration for K8200: comments/URL/readme
Example Configuration for K8200 : comments/URL/readme

example_configurations\K8200\Configuration.h:
* add machine specific header
* change STRING_URL to K8200 fork (@thinkyhead: What do you think?)

example_configurations\K8200\readme.md:
* updated documentation
* added URLs and links
10 years ago
CONSULitAS 0af5e3a04f Example Configuration for K8200: comments/URL/readme
Example Configuration for K8200 : comments/URL/readme

example_configurations\K8200\Configuration.h:
* add machine specific header
* change STRING_URL to K8200 fork (@thinkyhead: What do you think?)

example_configurations\K8200\readme.md:
* updated documentation
* added URLs and links
10 years ago
Scott Lahteine 637babb99b Merge pull request #1915 from elgambitero/Development
Some minor translations to spanish
10 years ago
elgambitero cb9ac490d4 Some minor translations to spanish 10 years ago
CONSULitAS 3851ac6226 Example Configuration for K8200 back in sync
example_configurations\K8200\Configuration.h:
* merge upstream changes from default Configuration.h manually
* add some machine specific comments
10 years ago
CONSULitAS b447a4ffab Merge remote-tracking branch 'upstream/Development' into Development 10 years ago
Scott Lahteine 7336e6df07 Always define old_z, not always z2 10 years ago
Scott Lahteine 5dd87d2e74 Enable all old_z_*_endstop vars for Z_DUAL_ENDSTOPS
- Potentially addressing #1911
10 years ago
Scott Lahteine 3f02da646c Make sure axis_active is cleared for #1908 10 years ago
Scott Lahteine e0e68c5cbc Rename servos[] array in Marlin to servo[] 10 years ago
Chris Petersen ffaf1b4f22 Add pin configuration for Brainwave Pro
Copied from jcrocholl's contributions to the OpenBeamUSA Marlin fork
10 years ago
Scott Lahteine 642f6a92bc fix type of code_has_value 10 years ago
Scott Lahteine 17ad80c1e1 Spacing in XYZ_CONSTS 10 years ago
Scott Lahteine 09d60e0128 Naming and code comments 10 years ago
Mehmet Sutas 5a9e45cc4a Fix Syntax Error Filament Runout Statement 10 years ago
Scott Lahteine 257a907456 Fix typo in next_bed_check_ms 10 years ago
Scott Lahteine e4b1e8651b next_ vars faster than previous_
- Change some `previous_` time vars to `next_` so an add only happens
at intervals
- Fix `HEATER_0_USES_MAX6675` polling too frequently, or not at all
10 years ago
Scott Lahteine ccddc280be Apply three more commits 10 years ago
Scott Lahteine 74e4b42f7e Default MACHINE_NAME to "3D Printer" 10 years ago
Scott Lahteine 8857b9e921 Use the extruder argument in plan_buffer_line 10 years ago
Scott Lahteine ac2b23f574 Homing fixes
- Prevent `Z_SAFE_HOMING` from homing Z twice in some cases
- Allow `G28` with XYZ values of 0 to explicitly set the position
- Don’t add `home_offset` when setting XYZ explicitly in `G28`
- Add `code_has_value` function to check for the presence of a numeric
value (could just test for space or nul to allow other types of values)
10 years ago
Scott Lahteine 055b11814a Additional cleanup of ultralcd.cpp 10 years ago
Scott Lahteine 388dd0cfa5 Fix doubled lcd_quick_feedback
- MENU_ITEM causes lcd_quick_feedback to be called, so only those calls
to `lcd_goto_menu` outside of the `MENU_ITEM` macro need to set the
`feedback` flag when calling `lcd_goto_menu`.
10 years ago
Scott Lahteine c6bb98abad machine name for hephestos too 10 years ago
Scott Lahteine ccbe2c4ea3 Apply CUSTOM_MACHINE_NAME to configurations
- Replace “Mendel” with “RepRap”
10 years ago
Scott Lahteine 5fe382949b Some G-Codes comment cleanup 10 years ago
Scott Lahteine 8b16ebe705 Break out prevent_dangerous_extrude feature
- It’s inline here, but could be a macro and duplicated for
`planner.cpp`
10 years ago
Scott Lahteine 740152ee70 Merge branch 'Development' into cold_extrude
Latest upstream commits
10 years ago
Scott Lahteine 5914d9d7de Shuffling declarations.. 10 years ago
Scott Lahteine b328c6e6b6 Shuffling declarations. 10 years ago
Scott Lahteine fb4cefc91d Define lcd_move_[xyz] ahead of lcd_move_menu_axis 10 years ago
Richard Miles 4c3736ed43 Feature: Add RAMPS CNC Controller Board
Created a new board to make using RAMPS as a CNC machine controller
easier. It maps pin 8 to the spindle and pin 9 to the controller fan.
10 years ago
Scott Lahteine 9189cc66ab Fix moves for DELTA for MANUAL_BED_LEVELING
- Use `line_to_current` in place of `plan_buffer_line`
10 years ago
AnHardt 56fc3a4835 bgr -> bg
+ update in documentation
10 years ago
Scott Lahteine 7a1aef1450 Merge pull request #1877 from AnHardt/display-only
Made encoderPosition and quick_feedback dependant on NEWPANEL
10 years ago
Scott Lahteine 6096164d79 Merge pull request #1878 from thinkyhead/cold_extrude
Cold extrude
10 years ago
Scott Lahteine a488445cbe Fix spelling of "too" 10 years ago
Scott Lahteine b1950a7f25 Merge pull request #1875 from Natealus/Development
Z Probe inverting not present in example configs, causes error
10 years ago
AnHardt df50523605 Made encoderPosition and quick_feedback dependant on NEWPANEL
where the hardware is available.
Fix for #1873
10 years ago
Scott Lahteine 2ca099d1e7 Merge pull request #1876 from thinkyhead/cold_extrude
Catch dangerous extrude before trying several
10 years ago
Scott Lahteine 837ceb9abb Merge pull request #1867 from epatel/Development
Added sanity check for MESH_NUM_X_POINTS and MESH_NUM_Y_POINTS
10 years ago
Scott Lahteine a95544f92a Spell adjustment 10 years ago
Scott Lahteine a00ebf03d4 Merge pull request #1868 from AnHardt/LCD_STR
Moved the definitions of the LCD_STR_* to Conditionals.h
10 years ago
Scott Lahteine 1269c445ab Catch dangerous extrude before trying several 10 years ago
Natealus 585eee6549 Z Probe inverting not present in example configs, causes error
The line const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to
invert the logic of the endstop is in the main configuration.h but
wasn't present in the example configuration.h's. Causes a compiling
error with Z Probe enabled. Just added it to all the configs. :)
10 years ago
AnHardt c5961892e3 Bulgarian for all the Configuration.h's 10 years ago
AnHardt 6248c93f37 Introduction of Bulgarian - language_bgr.h
Thank you @Nprod!
10 years ago
AnHardt 540dbb35e2 And an other MSG_BED in Marlin_main.cpp 10 years ago
AnHardt 14d4419e16 Replaced SERIAL_PROTOCOLPGM(MSG_BED) with SERIAL_PROTOCOLPGM("Bed")
Resolved some warnings in Marlin_main.cpp regarding compares of signed and unsigned integers by replacing 'int' or 'uint16_t' with 'uint8_t'.
10 years ago
AnHardt ea897654a4 Moved the definitions of the LCD_STR_* to Conditionals.h
to avoid errors in Marlin_main.cpp. #1860

In the include tree of Marlin_main.cpp the decision between the display types is not made.
To include the right LCD_STR_* ether 'dogm_lcd_implementation.h' or 'ultralcd_implementation_hitachi_HD44780.h' with all their code.
A 'dogm_lcd_implementation.h.h' would be a curiosity.
So i moved both of the definition blocks to conditionals.h

On the long term it could make sense to use the same numbering for the u8glib and the hitachi symbols.
10 years ago
Edward Patel 7dc64efe67 Added sanity check for MESH_NUM_X_POINTS and MESH_NUM_Y_POINTS 10 years ago
AnHardt 6a514f3dc9 Aplied HAS_LCD_CONTRAST also to Marlin_main.cpp
and cleaned typo.
10 years ago
AnHardt a76fb42ca6 Merge https://github.com/MarlinFirmware/Marlin into contrast 10 years ago
AnHardt bcc04192fc Remove Contrast Menu for U8GLIB_ST7920
The other two devices we use in u8glib have more than only dummy code.
Checked this in the library code.
10 years ago
Scott Lahteine 4788b59300 Thermistor values for configurator 10 years ago
Scott Lahteine bb917ecda8 Merge pull request #1853 from thinkyhead/dev_version
Set version to "1.0.3 dev"
10 years ago
Scott Lahteine caa7734402 Merge pull request #1864 from thinkyhead/is_running
IsStopped / IsRunning inline
10 years ago
Scott Lahteine 3162971cd6 current_position not static 10 years ago
Scott Lahteine 27cb90da8b IsStopped / IsRunning inline 10 years ago
Max 07fc2b5b70 Update language_ru.h 10 years ago
Scott Lahteine 756bb5e268 Cleanup formatting in hitachi & dogm lcd 10 years ago
Scott Lahteine 7431ef7e2d Merge branch 'Development' into dev_version
Latest upstream commits
10 years ago
Scott Lahteine 43773ff735 Formatting and lcd contrast masking 10 years ago
Scott Lahteine eb6e3886f4 Set version to "1.0.3 dev" 10 years ago
Scott Lahteine cf9b58452c Minimum delay in menu click feedback
Squished #1849
10 years ago
Scott Lahteine 1d291be2ba Fix de after PREVENT_DANGEROUS_EXTRUDE
- Set `de` to 0 when `position[E] = target[E]`
- Address regression mention in #1846
10 years ago
Scott Lahteine e03da4805b Merge pull request #1774 from epatel/Development
Mesh bed leveling: Added G29 S3 + finer display steps during manual input + bug fix
10 years ago
Scott Lahteine f7c4e7e19f Fix G29 not deploying in some instances 10 years ago
Edward Patel a9ed39b12d Moved checks into SanityCheck.h + removed previous added checks. 10 years ago
Edward Patel 002340f32c Merge branch 'Development-Marlin' into Development 10 years ago
Scott Lahteine c379f17117 Encapsulate setting of homing_bump_feedrate 10 years ago
Scott Lahteine 7d2c2f1790 Updates for the configurator
- Sections in all `Configuration_adv.h`
- Recognize JAPANESE/WESTERN/CYRILLIC options
- Better capturing of comments for tooltips
10 years ago
Scott Lahteine 967db181d0 Latest upstream commits 10 years ago
Scott Lahteine e502144eda Fixup formatting of last commit 10 years ago
Scott Lahteine d05efa008d Merge pull request #1825 from shaggythesheep/bugfix_no_heaters
Bugfix: Temperature checks when no heaters in use
10 years ago
Scott Lahteine d20f42c883 Don't stow the probe until the last grid point!
- Address Issue #1682 at hash #issuecomment-89756858
10 years ago
Scott Lahteine 5c2bb05af3 Merge pull request #1839 from AnHardt/fix-statusmessage
Fix lcd_status_message
10 years ago
Scott Lahteine d70a4a3847 Merge pull request #1823 from AnHardt/splashscreen
Disable splash-screen when done once
10 years ago
Scott Lahteine 56aea5f8e5 Merge pull request #1829 from Natealus/Development
Azteeg X3 Pro Pin fix ups
10 years ago
Scott Lahteine 6a860b99dc Merge pull request #1828 from Wackerbarth/Configurator
Update Configurator Files
10 years ago
AnHardt ac843fbf3b Fix lcd_status_message
Because we now can use utf8 with up to 3 bytes per symbol,
lcd_status_message[] must be 3*LCD_WIDTH wide.
Filling up the message, or cutting to length, are fixed to.

Fix for #1832 about at the end.
10 years ago
Scott Lahteine 6d084c017f Fix typo in FWRETRACT handler
Should be `retracting` and not `retract`
10 years ago
Edward Patel d27c82a450 Added check for Delta printers in Mesh, #error not yet supported. 10 years ago
Edward Patel 9a093b2e8f Added #error + mention not to enable ABL and Mesh at the same time 10 years ago
AnHardt 6ae714894e Now the simplycistic solution.
Just and only display splashscreen only once.
10 years ago
AnHardt d521693641 Revert "Draw content in display loop only when needed"
This reverts commit bf04a92cc0.
10 years ago
Natealus b6f2bff461 Azteeg X3 Pro Pin fix ups 10 years ago
Scott Lahteine d867c18535 Fix compile error with Z_DUAL_ENDSTOPS 10 years ago
Richard Wackerbarth 46474cf2f2 Incorporate @section headers from configurator 10 years ago
Richard Wackerbarth cf66cb8808 Bring configurator up-to-date 10 years ago
Richard Miles 1a5293c2ce Prevents MINTEMP / MAXTEMP when no heaters present
This commit checks whether or not HEATER_0 is in use, and if not, skips
the MIN / MAX temperature checks.
10 years ago
Edward Patel 5360158545 Merge branch 'Development-Marlin' into Development 10 years ago
AnHardt bf04a92cc0 Draw content in display loop only when needed
Example for splash screen.
10 years ago
AnHardt 9865318f1c Disable splash-screen when done once
Splash screen was shown with every display init.
That means every time the menus where entered.

Note the 2 in the initialisation.
The buffer is already written in two steps a 512 byte.
Without the 2 only the upper half is shown.
10 years ago
Scott Lahteine 53eb662908 Have the configurator read from MarlinFirmware repo 10 years ago
Edward Patel d24ea7c03f Added Comment in hope of github seeing these updates 10 years ago
Edward Patel 61de6ecd54 Added change to example Configuration.h's 10 years ago
Edward Patel 2f0081bbb5 Compile error fix! Fix for merge artifacts. 10 years ago
Edward Patel 0e6514e7bd Bug fix! Missed putting z value back in right slot after zigzag mod. 10 years ago
Edward Patel ea10601406 Merge branch 'Development-Marlin' into Development
Conflicts:
	Marlin/Configuration.h
	Marlin/Marlin_main.cpp
10 years ago
Scott Lahteine cb02bc6db4 Merge pull request #1817 from AnHardt/dogm_looptest
Execute DOGM display-loop less often
10 years ago
quillford b02a55e60f Fixed scara directions
Config said for a delta instead of for a scara
10 years ago
Scott Lahteine 6c5f07c5cb Merge pull request #1813 from thinkyhead/fixup_probing
Fix bad thermal runaway trigger
10 years ago
AnHardt 340d165a9c Reduce display updates for dogm displays
In 'if (encoderPastThreshold || LCD_CLICKED)' lcdDrawUpdate was not set.

'lcd_status_update_delay'-loop was not effective in  function
lcd_status_screen().
The loop prevented the update of the status screen but not the displays
update.
Shifted the loop into lcd_update().
10 years ago
AnHardt 418d22d7b3 Revert "Testloop cleanup"
This reverts commit 6361404b91.
10 years ago
AnHardt 6361404b91 Testloop cleanup
Shifted condition should still be in.
10 years ago
AnHardt 6d4b3f0d6a Move the condition before the loop
Result see: https://youtu.be/AEnBzdu9_tk
Dot is moving not so fast -> less executed loops.
10 years ago
AnHardt 4cb7dfc546 Move the 'alive dot' in every displayloop
Result see: https://www.youtube.com/watch?v=tdu7J0i-c4g
Loop is executed several times per display update.
10 years ago
Scott Lahteine b0f198c153 heater_index above its use 10 years ago
Scott Lahteine 60f8e0386f More thermal runaway states 10 years ago
Scott Lahteine f9dbd73652 Fix tr_target_temperature type - float! 10 years ago
Scott Lahteine c83faa9c5e Merge pull request #1811 from thinkyhead/fixup_probing
Compare indices instead of floats for probe actions
10 years ago
Scott Lahteine 61f8394361 Compare indices instead of floats for probe actions 10 years ago
Scott Lahteine a98183b463 Merge pull request #1809 from Wackerbarth/LanguageCleanup
Deferring default definition made #undef unnecessary
10 years ago
Scott Lahteine 41ded7e996 Merge pull request #1805 from thinkyhead/fixup_probing
Optimize coordinate copying, fix EXTRUDER_RUNOUT_PREVENT
10 years ago
Richard Wackerbarth 4119738e69 Deferring default definition made #undef unnecessary 10 years ago
Scott Lahteine 6f06d33be5 Fix missing refresh_cmd_timeout function 10 years ago
Scott Lahteine 2d099a2c70 Fix missing backslash in macro 10 years ago
Scott Lahteine 0f9b29e6c5 Merge pull request #1803 from Natealus/Development
Z_PROBE_ENDSTOP Pin for Azteeg X3 Pro
10 years ago
Scott Lahteine 0935084141 Fix manage_inactivity
- Document `manage_inactivity` function
- Allow `EXTRUDER_RUNOUT_PREVENT` to work with all extruders
- Use faster `memcpy` for copying coordinates
10 years ago
Scott Lahteine c065da52ec Spacing and spelling 10 years ago
Scott Lahteine a3e129e091 Merge pull request #1801 from thinkyhead/fixup_probing
Minor optimizations
10 years ago
Natealus ab11f90da0 Z_PROBE_ENDSTOP Pin for Azteeg X3 Pro
Just a simple #ifdef Z_PROBE_ENDSTOP to define the pin for it. Also has
a couple commented lines for switching Z_MIN_PIN if needed.
10 years ago
Scott Lahteine 8680b515b0 Fix missing tmp_extruder -> target_extruder 10 years ago
Natealus a6ba40ae48 Compiling error temperature.cpp with multiple extruders defined
It wouldn't compile because of this line in temperature.cpp it turns out
it was just a stray ( that didn't line up with the previous lines so I
just made it in line with the rest and it compiled fine.
10 years ago
Scott Lahteine fc3c76fc16 Fix #1800 10 years ago
Scott Lahteine c185912c19 Latest upstream commits, mostly 10 years ago
Scott Lahteine 1e5c18bb14 Add code_value_short and SERIAL_CHAR 10 years ago
Scott Lahteine e0d4368cb5 Minor code cleanup, move NUM_AXIS out of config 10 years ago
Scott Lahteine 4c7af484f8 Merge pull request #1787 from thinkyhead/fixup_tr
Fix: thermal_runaway_protection triggered by target temperature increase
10 years ago
Scott Lahteine c747becec1 Merge pull request #1796 from thinkyhead/pidbed_temp_eeprom
Add PIDTEMPBED to EEPROM
10 years ago
Scott Lahteine 84e4edaea7 Add M48 comment for #1794 10 years ago
Scott Lahteine 9ba55baa5b Track target temperature separately for each heater 10 years ago
Scott Lahteine 528e32a1d4 Fix timeout in thermal_runaway when temperature is set higher 10 years ago
Scott Lahteine b98ebd517e disable / enable_all_steppers functions 10 years ago
Scott Lahteine 713953d8c1 Upstream commits, allow no extruder in M105 10 years ago
Scott Lahteine 8f893eb8df Merge pull request #1798 from thinkyhead/fixup_probing
Fix probe height at G28 start
10 years ago
Scott Lahteine dde7e11f8e Merge branch 'Development' into fixup_tr
Latest upstream commits
10 years ago
Scott Lahteine abd7fc36b6 Fix probe height at G28 start 10 years ago
Scott Lahteine 610c8c5471 Merge pull request #1795 from thinkyhead/fixup_probing
Finish pin tests
10 years ago
Scott Lahteine e4934164e4 Merge pull request #1790 from Wurstnase/fix_home_z
fix feedrate for homing z
10 years ago
Scott Lahteine a469d796e1 Add cleanups needed for #1772 10 years ago
Scott Lahteine c0ca26cd50 Merge branch 'Development' into fixup_probing
Latest upstream commits
10 years ago
Scott Lahteine 5c1f08a35f Merge pull request #1772 from croadfeldt/Merge_cleanup
Z_PROBE_ENDSTOP
10 years ago
Scott Lahteine db7b0ea0cf Merge pull request #1569 from Wackerbarth/Development
Incorporating Build Numbers
10 years ago
Scott Lahteine 92119d0f7d Static delta[] for SCARA 10 years ago
Scott Lahteine 007a4bd421 Adjust spacing in view function 10 years ago
Scott Lahteine 424d5495e4 Add PIDTEMPBED to EEPROM 10 years ago
Scott Lahteine 6b919e14c1 Group all universal variables 10 years ago
Scott Lahteine 21cd2e4fae Merge branch 'Development' into fixup_probing
Latest upstream commits
10 years ago
Scott Lahteine 0e8182bbf2 Additional pin tests, cleanup 10 years ago
Wurstnase 45565b680d second wrong feedrate 10 years ago
Wurstnase 581b2aae04 fix feedrate for homing z
max_feedrate is in mm/s. line_to_destination needs a feedrate in mm/min because there is feedrate/60.
10 years ago
Edward Patel 48b1c3822f Merge branch 'Development-Marlin' into Development 10 years ago
Richard Wackerbarth ccdaea51ba Add KosselPro 10 years ago
Richard Wackerbarth f4599143eb Allow M115 to better reflect the build 10 years ago
Richard Wackerbarth 34c7d45879 Hook for Auto-generated Build Version
The automatic versioning system extracts a
build version number from the SCM system

That versioning information is written to the file
_Version.h, a file that is NOT preserved in the SCM.

If such a file will be present,
we include it here to utilize the parameters
that are defined therein.
10 years ago
Scott Lahteine c756b4cf07 Comment tweak 10 years ago
AnHardt 23cd54755f Fix typo in Marlin_main.cpp
related to current_position[Z_AXIS] and retract_zlift.

'+ =' -> '+='

Fix for #1786
10 years ago
Scott Lahteine e96df67630 Clarify thermal_runaway_protection
- Add comments documenting `thermal_runaway_protection`
- Add an enum for the thermal runaway states
- Add macros for temperature helper functions
- Fix a glitch with the z probe sled in homeaxis
10 years ago
Chris Roadfeldt 0afe6696f0 Merge remote-tracking branch 'MarlinFirmware/Development' into Merge_cleanup 10 years ago
Chris Roadfeldt 59994bd519 Not doing network admin work, pin not ping... :) 10 years ago
Chris Roadfeldt 916f59e35f Spaces not tabs in language.h.
Catch unlikely but possible error and head crash when using
Z_PROBE_REPEATABILITY_TEST
10 years ago
Scott Lahteine 66b3b53e76 Merge pull request #1762 from AnHardt/MiMa
Fix MIN&MAX temperatures again
10 years ago
Edward Patel 6b91b7b411 Mesh bed leveling: Added G29 S3 + finer steps in manual probing.
* Use "G29 S3 Xn Yn Zn.nn" to modify bad probed point manually
* Changed manual Z steps from 0.05 to 0.025 and made brought it to Configuration.h
10 years ago
Chris Roadfeldt 26dc80bf2d Typo fixed... 10 years ago
Chris Roadfeldt 2966ae2022 Fix Z_PROBE_PING not declared, allows code to compile if Z_PROBE_ENDSTOP
is not used.
10 years ago
Wurstnase 67d5e7973e old bump_divisor for cartesian/corexy-printer
some people are starting to ask why homing is so slow. this is the old standard hard-coded value.
10 years ago
Chris Roadfeldt bb41edc2ef Fixed extra #endif 10 years ago
Chris Roadfeldt a57862e29f Cleaning up code in prep for merge with upstream. 10 years ago
Chris Roadfeldt 745d9fe1a4 Merge remote-tracking branch 'MarlinFirmware/Development' into Merge_cleanup
Conflicts:
	Marlin/Marlin_main.cpp
10 years ago
AnHardt 488666832b Remove the previously introduced () 10 years ago
Scott Lahteine 443468df8d Merge pull request #1771 from AnHardt/iss1770
Added new - changed entries from Fix up LCD_PROGRESS_BAR
10 years ago
Scott Lahteine 9593f09b99 Merge pull request #1764 from thinkyhead/probe_leveling
Fix homing and leveling
10 years ago
Scott Lahteine 72c7de3570 Cleanup M48 10 years ago
Scott Lahteine 97a258b0b0 Clean up, document home_axis 10 years ago
AnHardt 831016b09f Added new - changed entries from Fix up LCD_PROGRESS_BAR
for when no LCD is defined.
Fix for #1770.
10 years ago
Chris Roadfeldt a508d835db Changed Z_PROBE_AND_ENDSTOP to Z_PROBE_ENDSTOP.
Updated documentation in Configuration.h.
Cleaned up and commented some code relating to Z_PROBE_ENDSTOP.
Separated Z_MIN_ENDSTOP and Z_PROBE_ENDSTOP completely.
10 years ago
Chris Roadfeldt fdb4ddbdea Merge remote-tracking branch 'MarlinFirmware/Development' into Development 10 years ago
atfield90 d273c90d53 Added support for Atmega 1281 chip 10 years ago
Scott Lahteine 1c7391717e Include sync_plan_position_delta for SCARA also 10 years ago
Scott Lahteine 8231fb166d Merge pull request #1758 from AnHardt/MENU_MULTIPLIER_ITEM
Fix: Audio feedback for MENU_MILTIPLIER_ITEM click
10 years ago
Scott Lahteine 0b57a2ab8b Merge pull request #1757 from bq/Translation-strings
Added new trasnslatable labels.
10 years ago
Scott Lahteine 18bb6be80e Fix homing and leveling
- Include the current Z when raising the axis after and between probing
- Add `sync_plan_position_delta` for parity with `sync_plan_position`
- Clean up and clarify `M48`, `dock_sled`, and others
10 years ago
AnHardt 3f2e863206 Improve conditions for HAS_TEMP
and use them in temperuture.h

Flattened the if structure - the preprocessor is doing the work - not the Arduino. Arduino.
10 years ago
AnHardt 85f8a26ba4 Fix MIN&MAX temperatures again
replaced GE0 with th matching GEX in the second row.
added some ()
10 years ago
AnHardt 19b11dfdd7 Fix can't enter MENU_MULTIPLIER_ITEM 10 years ago
Chris Roadfeldt c89b8368ee Merge remote-tracking branch 'MarlinFirmware/Development' into Development
Conflicts:
	Marlin/Marlin_main.cpp
10 years ago
Ivan Galvez Junquera d08782386b Added new trasnslatable labels.
* Added MSG_END_HOUR and MSG_END_MINUTE labels to all language files.
* Available translations:
  EN, FR, DE, ES, IT, PT, PT-BR.
10 years ago
Scott Lahteine 97a69d9b1c Correct XYZ after obtaining plan_bed_level_matrix
The current position needs to be updated by using the inverse
`plan_bed_level_matrix` on X, Y, and Z. All moves in the planner are
transformed by the `plan_bed_level_matrix` from this point forward.
10 years ago
Scott Lahteine 5f6962dd90 Merge pull request #1755 from thinkyhead/fixup_config
Raise when not retracting
10 years ago
Scott Lahteine ae89ccd2c7 Use Z_RAISE_BETWEEN_PROBINGS 10 years ago
Scott Lahteine 9a5a7a3f68 Raise when not retracting
Code to raise the probe before retraction is good, but the code should
always raise the probe, not just when retracting
10 years ago
Scott Lahteine 6ff1620fcb Merge pull request #1753 from thinkyhead/fix_extruder_offset
Fix EXTRUDER_OFFSET compiler error
10 years ago
Scott Lahteine cda4bd4ad9 Correct the comment about M206 10 years ago
Scott Lahteine 935592cf6a offsets off by default 10 years ago
Scott Lahteine 2a45922afe Restore extruder_offset, init more simply 10 years ago
Scott Lahteine 28792e5731 Fix typo in assignment 10 years ago
Scott Lahteine bb6174524f Fix EXTRUDER_OFFSET compiler error
- Addressing issue #1741
10 years ago
Scott Lahteine 571652c49b Fix LCD click
- Make the default LCD click sound more pleasant
- Fix warnings about bed temperature runaway
10 years ago
Chris Roadfeldt 45ece5afb1 Merge remote-tracking branch 'MarlinFirmware/Development' into Development 10 years ago
Chris Roadfeldt 17707e7479 Fixed Z_PROBE_PIN pullup bug.
Documented some additional areas that should be addressed if Z_PROBE is
fully separated from Z_MIN or Z_MAX.
Fixed a documentation error in sanity checks. Servos start at 0 not 1.
10 years ago
Scott Lahteine 21ab44cfa7 Merge pull request #1750 from thinkyhead/fixup_config
Bring all configs up to date
10 years ago
Scott Lahteine 50145266cd Merge pull request #1748 from thinkyhead/raise_before_homing
Apply Z_RAISE_BEFORE_HOMING before homing XY
10 years ago
Scott Lahteine a117b6bff6 Merge pull request #1747 from thinkyhead/progress_bar_tweak
Fix up LCD_PROGRESS_BAR
10 years ago
Scott Lahteine 3348b3bf0c Allow SD_FINISHED_RELEASECOMMAND to be undefined 10 years ago
Scott Lahteine 82794fa5f7 Add delta generic not renaming 10 years ago
Scott Lahteine ba2c7cb467 Update configs with all the latest 10 years ago
Chris Roadfeldt ec1d9c0b8f Use Z_PROBE_ENDSTOP_INVERTING when checking pin status. 10 years ago
Chris Roadfeldt 3175c70c79 Manually synching back up with MarlinFirmware/Development. 10 years ago
Chris Roadfeldt faac2af4af Merge remote-tracking branch 'origin/Development' into Development 10 years ago
Chris Roadfeldt 3be00cce6f Merge remote-tracking branch 'MarlinFirmware/Development' into Development
Conflicts:
	Marlin/Configuration.h
10 years ago
Chris Roadfeldt e08f8eed05 Revert 06f767d..cba5692
This rolls back to commit 06f767d608.
10 years ago
Scott Lahteine 5e82ed4f30 Restore ENDSTOPPULLUPS in Configuration.h 10 years ago
Chris Roadfeldt 992b07ca57 Don't disable Z_RAISE_BEFORE_HOMING when Z_PROBE_AND_ENDSTOP is enabled. 10 years ago
Chris Roadfeldt cba5692673 Merge remote-tracking branch 'MarlinFirmware/Development' into Development
Conflicts:
	Marlin/Marlin_main.cpp
	Marlin/stepper.cpp
10 years ago
Scott Lahteine 8500c80b33 Apply Z_RAISE_BEFORE_HOMING before homing XY 10 years ago
Scott Lahteine 92b54aa27e #define HAS_POWER_SWITCH 10 years ago
Scott Lahteine 5519882eea Fix up LCD_PROGRESS_BAR
- Some messages should not expire with `PROGRESS_MSG_EXPIRE`.
- Simplify conditional for progress bar with sanity checks.
- Rename `messageTick` to `expireStatusMillis` and make it the expire
time.
10 years ago
Scott Lahteine 6864280803 Use elif and parentheses in conditionals 10 years ago
Scott Lahteine 8c136a5ab5 Conditionals and comments for PS = 0 10 years ago
Scott Lahteine 2faed961ce Allow POWER_SUPPLY 0 for no power switch 10 years ago
Scott Lahteine baa6787393 Merge pull request #1740 from thinkyhead/fixup_homing
Apply leveling for DELTA
10 years ago
AnHardt 9ac7dc675e Make filament display on dogm_... same as hitachi...
Thanks @MagoKimbra.
10 years ago
AnHardt 50a732360a Replace extrudemultiply by extruder_multiply[active_extruder]
Fix for #1460.

Seems to work with only one extruder. Can't test this myself with more.
10 years ago
Scott Lahteine e63076504d Merge pull request #1733 from AnHardt/c20
Get back folder symbols on Hitachi displays
10 years ago
Scott Lahteine 41d258697a Pass the z for after probing to retract_z_probe
A `z_before` value is passed to probe_pt, but the `retract_z_probe`
function assumes that Z is 0, doesn’t add `current_position[Z_AXIS]` as
other cases do. This may be superfluous, so this is a test, and will be
reverted if it has no effect.
10 years ago
croadfeldt 06f767d608 Merge remote-tracking branch 'upstream/development' into development 10 years ago
Scott Lahteine b47fa8c064 Merge pull request #1735 from AnHardt/compilerCandy
Remove some further warnings
10 years ago
Scott Lahteine e96db1cd6c Make G29 shared function inline 10 years ago
Scott Lahteine d73b169de3 Apply leveling for DELTA,
- Fix `prepare_move` function not calling `adjust_delta`
- Add more shorthand for plan_buffer_line.
- Fix wrong `federate` usage, assuming they are all mm/m
- Minor `stepper.cpp` cleanup
10 years ago
Scott Lahteine 85b67e5223 Merge pull request #1738 from thinkyhead/fixup_homing
Fix G29 E and M48 n
10 years ago
Scott Lahteine ce44bee28b Small code reduction 10 years ago
Scott Lahteine 0213f7f016 Cleanup case for M666 10 years ago
Scott Lahteine 803425e12c Fix G29 E and M48 n
- Users prefer `G29 E` to work like `M48 E` so fixed that
- `M48 n` replaced with `M48 P` (or `p`). `n` legacy support
- Shorten some strings to save precious bytes
- Smaller code for 3-point probing
10 years ago
Scott Lahteine 1e9999711c Merge pull request #1736 from thinkyhead/fixup_homing
Fix G28 homing Y with X
10 years ago
Scott Lahteine d738b7acdd Merge pull request #1724 from Natealus/Development
Viki 2 Pins from Manual and Azteeg X3 Pro Endstop Reswap
10 years ago
Scott Lahteine e8ae51bfe3 Fix G28 homing Y with X
- Fixed a typo causing G28 to home incorrectly
- Added documentation to G28
- Added homeXYZ bools to neaten the code
- Added a note about home_offsets being questionable
10 years ago
AnHardt 7b2550a604 Times can't be negative.
cardreader.cpp needs temperature.h for autotempShutdown() when
AUTOTEMP is defined but warns about unused variables.
Unpublished variables by putting them in to temperature.cpp.
10 years ago
AnHardt 507efa771b Remove unused variable fan_rot
and satisfy the compiler about the implicit compare.
10 years ago
AnHardt 2b959a7752 Some additional {} to make the compiler happy. 10 years ago
AnHardt 0f1bd6e4a7 In ST7920_SWSPI_SND_8BIT(uint8_t val) parameter is unsigned
therefor in macro ST7920_WRITE_BYTE(a) cast a to uint8_t
to make the compiler happy.
10 years ago
AnHardt 81bab8739d Get back folder symbols on Hitachi displays
and make use of column 20.
10 years ago
Chris Roadfeldt a9802c95b3 Ensure Z_PROBE_PIN is defined if Z_PROBE_AND_ENDSTOP is. 10 years ago
Chris Roadfeldt 62834a1c43 Don't deploy probe on Z Axis homing if Z_PROBE_AND_ENDSTOP is enabled,
unless Z_SAFE_HOMING is.
10 years ago
Chris Roadfeldt 666fad3494 Typo fixed in sanity check. 10 years ago
Chris Roadfeldt 08a7aa16c5 Don't deploy Z Probe on Z homing if Z_PROBE_AND_ENDSTOP is defined. 10 years ago
Chris Roadfeldt 80285251cc More config cleanup work for Z_PROBE_AND_ENDSTOP. 10 years ago
Chris Roadfeldt fe4549cd83 Config file Z_PROBE_AND_ENDSTOP description clean up. 10 years ago
Chris Roadfeldt 82d2f11129 More additional sanity checks for Z_PROBE_AND_ENDSTOP 10 years ago
Chris Roadfeldt 05134f0807 Additional Sanity Checks for Z_PROBE_AND_ENDSTOP 10 years ago
Chris Roadfeldt c75a5e8c55 Fixed typo for Z_PROBE_AND_ENDSTOP support in pins_RAMPS.h.
Confirmed Sanity checks are working.....
10 years ago
Chris Roadfeldt a98ac4033b Added Z_PROBE_PIN to #define for Z_PROBE_AND_ENDSTOP support. 10 years ago
Chris Roadfeldt 6125124d6c Config file cleanup for Z_PROBE_AND_ENDSTOP support. 10 years ago
Chris Roadfeldt 324c14943b Bug fixes for Z_PROBE_AND_ENDSTOP.
Code cleanup for Z_PROBE_AND_ENDSTOP.
Added Z_PROBE_PIN to pins_RAMPS_13.h
10 years ago
Natealus ca5821aa57 Made #ifdef DELTA branch instead
Another fellow here gave me the idea to do it this way
10 years ago
Natealus 04fda6b3e9 Undesired behavior with endstops swapped
Made my swap commented out so its the option not the default.
10 years ago
Natealus ca1477d830 Revert "Undesired behavior with endstops swapped"
This reverts commit 15028e9b08.
10 years ago
Natealus 15028e9b08 Undesired behavior with endstops swapped
I made my changes to swap MIN and MAX endstops on the Azteeg X3 Pro the
option rather than the default to fix unexpected reversal.
10 years ago
Nate Stokes 18245c6cd2 Update pins_RAMBO.h
Updated for the changes that Thinkyhead made before I submitted mine.
10 years ago
Natealus 234a9d0b12 Viki 2 Pins from Manual
I added in the pins into the new board files for the Azteeg X3, X3 Pro,
Printrboard, and Rambo. I'm sure it can be added for others too but
these are the manual specified pins. Just like many things here though,
I can't test for the boards other than the Azteeg X3 Pro. Hopefully it
works smoothly for everyone who happens on this nifty display. :)
10 years ago
Scott Lahteine a22efc5f11 Merge pull request #1597 from Wurstnase/g29_auto_script
G29 auto script
10 years ago
Scott Lahteine 62a3da9618 Merge pull request #1723 from thinkyhead/tweak_g92
Tweak G92
10 years ago
Scott Lahteine afff968e88 ARRAY_BY_EXTRUDERS, shorthand to sync planner
- Add some documentation to planner and stepper headers
- Patch up RAMBO pins with undefs
- Add `sync_plan_position` inline to set current XYZE
- Swap indices in `extruder_offset` to fix initialization values
10 years ago
Scott Lahteine 2b0c25a091 Tweak G92 to call plan_set_position only once, yes? 10 years ago
Natealus 22bea37393 Azteeg X3 Pro Pin Revisions
I added the fan pins in here and left them at -1 in configuration_adv.h
and it works fine. Pinned for a 4 extruder from 1-4 and HE5 being the
controller fan, HE6 being the Extruder Auto Fan/Water pump in the Kraken
case, and HE7 being for part cooling fan. Added in descriptions for the
MIN MAX pin swap and for servo motor additions.
10 years ago
Scott Lahteine 93dc0d0518 Merge pull request #1718 from AnHardt/blink
Move variable blink from ultralcd.h to dogm_lcd_implementation.h
10 years ago
Scott Lahteine edb67ea165 Patch generic delta config
- Addressing issue mentioned at #1699
10 years ago
AnHardt c481c3b180 Move variable blink from ultralcd.h to dogm_lcd_implementation.h
to avoid warnings about unused blink.

Concentrate definitions of variables in dogm_lcd_implementation.h to one place.

Make only local used variable currentfont static.
10 years ago
Chris Roadfeldt 059052889f Further Sanity Checks for Z_PROBE_AND_ENDSTOP. 10 years ago
Chris Roadfeldt 8b81f20c61 Filling in more places where Z_PROBE_PIN and Z_PROBE_AND_ENDSTOP need to
be.
Added Sanity Check for it.
Added hook so it's enabled.
10 years ago
Chris Roadfeldt fd823449ad Added serial message for Z Probe trigger. 10 years ago
Chris Roadfeldt 92eb8109ab Fix declaration of old_z_probe_endstop. 10 years ago
Chris Roadfeldt 44b88b41a2 Added credit for code. 10 years ago
Chris Roadfeldt 2979b40a7a Fixed typo in Z Probe and Endstop section. 10 years ago
Chris Roadfeldt 9f3ff14008 Enabled separate Z Probe and Z Axis endstop use at same time.
Typo fixes in comments in existing code.
10 years ago
Scott Lahteine b14be7235e Merge pull request #1585 from galexander1/strtod_e_fix
Fix `code_value` (so `G1X1E2` isn't evaluated as `G1 X100 E2`)
10 years ago
Scott Lahteine ba871e46bf Fix compiler warnings
- Patched up for most included configurations
10 years ago
Scott Lahteine ffe0df4b36 Latest upstream commits 10 years ago
Scott Lahteine bc2f249cc6 Merge pull request #1622 from AnHardt/tm-utf-minus-kanji
The big Language Pack
10 years ago
Scott Lahteine abfcbd793f Merge pull request #1693 from chris-bo/rework_lcd_beeper
use only one implementation for beeper feedback
10 years ago
Scott Lahteine 55739a4efe Fix Z_APPLY_STEP 10 years ago
Scott Lahteine df02b992b0 Fix redundant_temperatrure_raw setting 10 years ago
Scott Lahteine fe29bdd72b Also fix temperature externs 10 years ago
Scott Lahteine 578f93bc26 Fixup temp arrays and leveling equation, prepare for merge 10 years ago
Scott Lahteine 7d472367e2 Merge pull request #1713 from epatel/Development
Parentheses need here otherwise sanitycheck.h does wrong thing on line 222
10 years ago
Scott Lahteine ce485175eb Give all temp arrays 4 indices 10 years ago
Edward Patel 782464ea4d Parentheses need here otherwise sanitycheck.h does wrong thing on line 222 10 years ago
Scott Lahteine 460f73056b Fix ECHOPAIR ambiguity
- Also patch up some warnings
10 years ago
Scott Lahteine 19d418cd6a Fix up the code to eliminate warnings 10 years ago
Scott Lahteine b2496533c6 Put " M" into pmem 10 years ago
Scott Lahteine 267d6bef15 Eliminate most warnings
- Fix a bug reading `code_value` for `M503 Sn`
- Hide and remove unused variables
10 years ago
Scott Lahteine 3fd7790a15 Merge branch 'Development' into fixup_leveling
Latest upstream commits
10 years ago
Scott Lahteine b76a352d41 Fix the planeNormal calculation 10 years ago
Scott Lahteine 410f64782a Always 4 temp sensors 10 years ago
Scott Lahteine 0b32431551 Remove abs() from planeNormal.z 10 years ago
Scott Lahteine 53169d96e8 Set temp_meas_ready in set_current_temp_raw 10 years ago
Scott Lahteine 06eb7f5b3c Latest upstream commits 10 years ago
Scott Lahteine 04328d7537 Add zprobe_zoffset in set_bed_level_equation_*
- Also a small tweak to SanityCheck.h
10 years ago
Scott Lahteine d2e73545ba Merge pull request #1705 from AnHardt/ddt
Avoid warnings in SanitiCheck.h
10 years ago
Scott Lahteine 78090275a9 Fix probe range editing
- Increase the probe offset range to -20…20
- Apply the range limits to the menu item
10 years ago
AnHardt 1ff6df8f9e Avoid warnings in SanitiCheck.h
/SanityCheck.h:107:53: warning: missing terminating ' character
...
10 years ago
AnHardt ebe5b87c2c < like in the oher compareble loops
to avoid:
Marlin_main.cpp:1790: warning: array subscript is above array bounds.
10 years ago
AnHardt 20f909567a Merge https://github.com/MarlinFirmware/Marlin into tm-utf-minus-kanji
Conflicts:
	README.md
Solved
10 years ago
Christian Bohn eab5fad539 code formatting 10 years ago
Scott Lahteine abadeac08d Group zprobe_zoffset with bed leveling 10 years ago
Scott Lahteine 9e8427f253 Merge pull request #1698 from zeuseye/Development
Clean "fromsd" array if not SDSUPPORT
10 years ago
Scott Lahteine 32331faee4 Prettify Bed Level Correction Matrix
- Put + in front of positive values in the output
10 years ago
Scott Lahteine f5f4c2b366 Merge branch 'Development' into fixup_leveling
Latest upstream commits
10 years ago
Scott Lahteine 7667023817 Merge pull request #1694 from Wurstnase/fix_z_config
comment #define Z_DUAL_STEPPER_DRIVERS
10 years ago
Scott Lahteine 5eff15c409 Merge branch 'Development' into fixup_leveling
Latest upstream commits
10 years ago
Scott Lahteine ad05a726c1 Merge pull request #1691 from AnHardt/PID_dt
Move definition of PIDdT back to temperature.h
10 years ago
Scott Lahteine 5261d35737 Fix custom m-code behavior
Don’t set CUSTOM_M_CODE_SET_Z_PROBE_OFFSET if there’s no Z probe
10 years ago
Scott Lahteine fbf9b21e0c Merge plus fixup zprobe_zoffset
- Make `zprobe_zoffset` conditional
- Fix ConfigurationStore for `zprobe_zoffset`
10 years ago
Scott Lahteine 96b5da7198 Fix up bed leveling code
- Init `zprobe_zoffset`
- Remove `current_position[Z_AXIS] = zprobe_zoffset` lines from the
`set_bed_level_equation_*` functions
- Apply standards to `mesh_bed_leveling` files
- Document `MESH_BED_LEVELING`
10 years ago
Scott Lahteine 02b4f5f9cd Merge pull request #1689 from AnHardt/MAXand161
Fix MAX6675 again and introduce set_current_temp_raw()
10 years ago
AnHardt f680e509c4 Enclosed error-messages for TEMP_SENSOR_1_AS_REDUNDANT in PSTR() 10 years ago
Victor Torre d43d47da14 Clean "fromsd" array is not SDSUPPORT
if not have SDSUPPORT the fromsd array is not necessary
10 years ago
AnHardt ac81b4084f Make variables and function static. 10 years ago
alexborro 55025558dc Implement Dry-Run mode in G29
It just probe all the bed without appliying the matrix.
Useful after a first G29 to check the topology.
10 years ago
wurstnase a4ad9117dd comment #define Z_DUAL_STEPPER_DRIVERS 10 years ago
chris-bo 2dfd0e5ce7 Update Configuration.h
documentation how to disable buzzer feedback
10 years ago
Christian Bohn 4c3cbc0961 use only one implementation for beeper feedback 10 years ago
AnHardt 01cc97a3c3 Corected condition for PIDdT 10 years ago
AnHardt 94330705c7 Move definition of PIDdT back to temperature.h
make it unconditional
remove all definitions in the 'Configuration.h's
remove form 'Conditionals.h'
10 years ago
AnHardt dd0067afa6 Fix MAX6675 again and introduce set_current_temp_raw()
to make the temperature-code work again with Arduino 1.0.6.

Sorry could not make an extra block on base level.
10 years ago
AnHardt 8848b7e9ef Add the missed {} to END_MENU in ultralcd.cpp
what caused an extra update of encoderLine most of the time.
10 years ago
AnHardt 4beffbca69 Make SMALL_INFOFONT configurable.
Tweak the documentation
10 years ago
CONSULitAS 045ea42cc8 Merge remote-tracking branch 'upstream/Development' into Development 10 years ago
alexborro c2ba5d0c09 Fix ZigZag and Topograph table
ZigZag: Inverted Behavior.. If T supplied, it does not zigzag.
Topograph table: The table was rotated 90º clockwise.
10 years ago
alexborro 0ce3576685 New Feature: Z_DUAL_ENDSTOPS
Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z
steppers - Let's call them Z stepper and Z2 stepper.
That way the machine is capable to align the bed during home, since both
Z steppers are homed.
There is also an implementation of M666 (software endstops adjustment)
to this feature.
After Z homing, this adjustment is applied to just one of the steppers
in order to align the bed.
One just need to home the Z axis and measure the distance difference
between both Z axis and apply the math: Z adjust = Z - Z2.
If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it
is.. think about it) and the Z adjust would be positive.
Play a little bit with small adjustments (0.5mm) and check the
behaviour.
The M119 (endstops report) will start reporting the Z2 Endstop as well.
10 years ago
AnHardt c686069ccd Revert "Remove 6x9 font"
This reverts commit e6cb8ee188.

Conflicts:
	Marlin/dogm_lcd_implementation.h
Confilkt solved
Needs rework.
10 years ago
AnHardt b00a531df8 Revert "Removed now unneded FONT_STATUSMENU"
This reverts commit 8c5bb38748.
10 years ago
AnHardt 9d589cbb2a Merge https://github.com/MarlinFirmware/Marlin into tm3-utf-minus-kanji
Conflicts:
	Marlin/example_configurations/delta/generic/Configuration.h
	Marlin/example_configurations/delta/kossel_mini/Configuration.h
	Marlin/language.h

Conflicts solved
10 years ago
Scott Lahteine 8db4fd7177 Merge branch 'Development' into planner_oh_planner
Latest upstream commits
10 years ago
Scott Lahteine 0d81abe1c9 Merge branch 'Development' into config_testing
Latest upstream commits
10 years ago
Scott Lahteine 01740fd9c6 Merge branch 'Development' into planner_oh_planner
Latest upstream commits
10 years ago
Scott Lahteine fc53e43de6 Don't test raw temp for MAX6675
- Remove test of raw temp for thermistor 0 when using MAX6675
- Longer `raw_temp_value` array for `TEMP_SENSOR_1_AS_REDUNDANT`
10 years ago
Scott Lahteine 03fa9fae9f Merge branch 'Development' into fix_temperature_minmax
Latest upstream commits
10 years ago
Scott Lahteine 1fac388664 Revert measurement loop 10 years ago
CONSULitAS 703f3b38c4 Merge remote-tracking branch 'upstream/Development' into Development 10 years ago
nicolas-rambaud 37cde8a191 Report changes from previous PR from old code base including :
I've updated the minimum values from the LCD.
It has been a while that i want to at least fix this.
I have an inductive probe and often i need to set my zOffset to something lower than 0.5.
With the current implementation, the default LCD value is set to 0.5 for some reason.
On my case i need to be able to set it down to 0.0 as my inductive probe can be lower than 0.5.
Before with the LCD we couldn't change this value below 0.5. We had to flash the firmware every time which was painful.
Now we are able to change this value down to 0.0 if needed.
I've also changed the minimum value for Z min acceleration.
In the default configuration it's set to 25 but on the LCD the minimum was 100 which is not coherent.
I've changes the minimum to 10. On this axis, depending on the mechanics/motor drivers we might require very low acceleration, so i guess 10 is somehow realistic.
10 years ago
Scott Lahteine b26a3ea02c Merge pull request #1662 from josla972/refactor_scara
Refactor SCARA calibration. Save some lines of code and possibly ROM.
10 years ago
wurstnase e6f6c6e3a1 fix bad insertion config again 10 years ago
Scott Lahteine 6bdee87be3 Cleanup temperature code
- Get rid of unused temp states in the ISR, resulting in more frequent
temperature reading with fewer sensors
- Shrink code slightly in min/max testing
10 years ago
Scott Lahteine 34a41648ab Merge branch 'Development' into planner_oh_planner
Latest upstream commits
10 years ago
Scott Lahteine 4fbb80567e Get upstream commits 10 years ago
Scott Lahteine 7717e1ce33 Fix bad insert in configuration 10 years ago
Scott Lahteine 146501215f Fix mangled probe_pt calls
- Address issue #1669
- Remove the TOPO_ORIGIN configuration setting
10 years ago
maverikou 15345cc249 Corrected Z_PROBE_ALLEN_KEY behaviour. 10 years ago
maverikou 0f034dd97e Clean up Z_RAISE_AFTER_PROBING to work the same in all code paths except Z_PROBE_SLED. 10 years ago
maverikou 6c96f32069 Blind fix for #1507 10 years ago
Josef Larsson 379348487e Removed malplaced comment. 10 years ago
Scott Lahteine 8bd6e37b21 Merge pull request #1661 from thinkyhead/G92_no_offset
Don't add home offsets in G29
10 years ago
Scott Lahteine 582cd780cd Fix compile error with `*_DUAL_STEPPER_DRIVERS`
- Patch up macros in stepper.cpp
10 years ago
Josef Larsson 9b3462f73f Refactor SCARA calibration. Save some lines of code and possibly ROM. 10 years ago
Scott Lahteine 691e753cc3 Don't add home offsets in G29
- Address #1262 by leaving values as set
- Rename `add_homing` to `home_offset`
10 years ago
Scott Lahteine 88e81a4804 Latest upstream commits, plus fixes
- Also add Manual Bed Leveling to the rest of the configs
10 years ago
Scott Lahteine 15eb5d35a2 Merge branch 'Development' into config_testing
Latest upstream commits
10 years ago
Scott Lahteine 19df90622b Include Conditionals.h file in update 10 years ago
Scott Lahteine 9b639b4135 Merge pull request #1619 from epatel/manual-bed-leveling+mesh-bed-level
Manual bed leveling + mesh bed leveling
10 years ago
Scott Lahteine 2c9bd15625 Move LCD items to `Conditionals.h`
- `Conditionals.h` is included twice, setting LCD values the first time
10 years ago
Scott Lahteine 63abeaff38 Merge branch 'Development' into config_testing
Latest upstream commits
10 years ago
Scott Lahteine 3703694e30 Fix temperature min/max test
- Base tests on all thermistors/thermocouples, not just heater 0
10 years ago
Edward Patel 3d0a060a7a Added G29 command 10 years ago
Edward Patel c516747847 Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 10 years ago
Scott Lahteine af14c684b5 Minor optimizations to planner code
- Prefetch values used more than once
10 years ago
Scott Lahteine 13fbf42d95 Cleanup of planner code
- Use named axis indexes, `X_AXIS` etc.
- Replace `block.steps_A` with block.steps[A]`
- Replace `A_segment_time` with `segment_time[A]`
- Add `A_AXIS`, `B_AXIS` for `COREXY` axes
- Conditional compile based on `EXTRUDERS`
- Add BLOCK_MOD macro for planner block indexes
- Apply coding standards to `planner.h` and `planner.cpp`
- Small optimizations of planner code
- Update `stepper.cpp` for new `block` struct
- Replace `memcpy` with loops, let the compiler unroll them
- Make `movesplanned` into an inline function
10 years ago
AnHardt 64e3d33893 Fix shrinked menucode
by updating 'encoderPosition' in END_MENU() line 1.
10 years ago
Edward Patel a7e89d4cfa Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 10 years ago
AnHardt 8c5bb38748 Removed now unneded FONT_STATUSMENU 10 years ago
Scott Lahteine 2176a22d42 Fix count_direction initializer
- Addressing #1625
10 years ago
AnHardt e72cb3e45d Merge https://github.com/MarlinFirmware/Marlin into tm2-utf-minus-kanji
Conflicts:
	Marlin/dogm_lcd_implementation.h
	Marlin/ultralcd_implementation_hitachi_HD44780.h

Fix merge conflicts 2
10 years ago
Scott Lahteine cb6942d4a7 Merge branch 'Development' into config_testing
Get upstream commits
10 years ago
AnHardt 6bfccaf99e Merge https://github.com/MarlinFirmware/Marlin into tm2-utf-minus-kanji
Conflicts:
	Marlin/dogm_lcd_implementation.h
	Marlin/ultralcd_implementation_hitachi_HD44780.h
Fixed conflicts 1
10 years ago
Scott Lahteine 5644ad6809 Fix hiliting of edit items 10 years ago
Scott Lahteine 63d5d28085 Merge branch 'Development' into config_testing
Latest upstream changes
10 years ago
Scott Lahteine 526a755a66 Merge pull request #1652 from AnHardt/PIDdebug
PID debug
10 years ago
Scott Lahteine a1c240b0a4 Delta supports some auto bed leveling options 10 years ago
Edward Patel 5112cf8422 Added comment for the EEPROM storage 10 years ago
Edward Patel 4619d80524 Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 10 years ago
Scott Lahteine 199151a4ed Merge pull request #1650 from AnHardt/beautify
Beautivy statusscreen
10 years ago
Scott Lahteine 2424713a8f Merge pull request #1640 from AnHardt/warning6
codepos not used in gcode_M28()
10 years ago
Scott Lahteine b6d381f863 Divide up Conditionals to get LCD items early 10 years ago
AnHardt e85061d20d Added changes to the 'new' Configuration.h s 10 years ago
Scott Lahteine 33c7c6e11d Conditionals.h requires Arduino.h 10 years ago
Scott Lahteine 8ade04b78e Felix and Hephestos configs
- Not sure why these are showing as all new
10 years ago
Scott Lahteine 670006b919 Remove invariant code from Configurations
- Add `Conditionals.h` with calculated configuration values
- Add `SanityCheck.h` with checks for configuration errors
- Remove equivalent code from all configurations
- Move error checks from some sources to `SanityCheck.h` also
- Fix initialization of count_direction in stepper.cpp
10 years ago
Edward Patel a61f679568 Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 10 years ago
Edward Patel c87faa69ed Shortened mesh_plan_buffer_line() 10 years ago
AnHardt 47c1ea72af Merge https://github.com/kieranc/Marlin into PIDdebug
Conflicts:
	Marlin/temperature.cpp

Cleaned merge conflict.

Codeposition had changed.
Variable pid_input had vanished.

Signed-off-by: AnHardt <github@kitelab.de>
10 years ago
AnHardt f1d3d1524d Merge branch 'optimize_menu_code' of https://github.com/thinkyhead/Marlin into beautify
Conflicts:
	Marlin/dogm_lcd_implementation.h

solved merge conflict.
10 years ago
AnHardt fa889cd6e1 Beautivy statusscreen
by shifting things some pixels around
10 years ago
Scott Lahteine 7279e4f82f Small code tweaks re lcd.print 10 years ago
Scott Lahteine 90ba61b9b8 Include indicator for new drawmenu_generic
In the new method we pass the character that should be used for
selected state, not the character to print always.
10 years ago
Scott Lahteine 15d29efad5 Pass sel to lcd_implementation_mark_as_selected
- Pass selected state directly to lcd_implementation_mark_as_selected
- Rename sel function parameter
- Include a minor fix for SdBaseFile.h
10 years ago
Scott Lahteine a547dc2148 Merge branch 'Development' into optimize_menu_code
Get upstream changes
10 years ago
CONSULitAS 9c1f6e7ac7 Merge remote-tracking branch 'upstream/Development' into Development 10 years ago
alexborro e650d4044e Fix "Stop Print" function in the LCD menu
When one hit "Stop Print" option in LCD menu, the command buffer was not
cleared. The printer keep moving until the buffer has been emptied.
Actually I could not clear the command buffer as well.. I don't know
why, it doesnt work as expected.
I need to implement a routine inside Stepper ISR to handle such
situation.
10 years ago
AnHardt e917477fec Merge https://github.com/MarlinFirmware/Marlin into tm-utf-minus-kanji
Conflicts:
	Marlin/dogm_lcd_implementation.h
	Marlin/fonts/make_fonts.bat

Claerd conflicts with my own #1621. (His was easy. :-) )

corrected typo in fonts/README.fonts

Applied changes to the new delta-configurations
 and deletet there some extra whitespace at the line-endings.
10 years ago
AnHardt ae01a6b5f2 Make use of codepos.
Saves one addition.
Needs one pointer on the stack.

Don't know if this is a go trade.
10 years ago
Scott Lahteine a534ac197a Merge pull request #1621 from AnHardt/remove--6x9-font
Remove 6x9 font
10 years ago
Scott Lahteine 80e0ee10ca Merge pull request #1631 from AnHardt/iss1593
Decrease KILL_DELAY
10 years ago
Scott Lahteine 4ce79920e5 Merge pull request #1635 from AnHardt/warnings1
Negative times are unlikly
10 years ago
Scott Lahteine 76127b8a55 Merge pull request #1630 from Wurstnase/fix_g29
optional parameters must be named when ignoring order
10 years ago
Scott Lahteine be3f2dc1d9 Merge pull request #1636 from AnHardt/warning2
lcd_control_retract_menu() is conditional.
10 years ago
Scott Lahteine 8d396584bf Merge pull request #1637 from AnHardt/warning3
lcd_autostart_sd() has two conditions.
10 years ago
Scott Lahteine 8664c6d465 Merge pull request #1638 from AnHardt/warning4
delta[3] not used when DELTA not defined.
10 years ago
Scott Lahteine 10711ccc6a Merge pull request #1639 from AnHardt/warning5
G4 could wait for an undefined time
10 years ago
Edward Patel 28c91deb5c EEPROM saving of z_values.
Tried to make it a little intelligent.
10 years ago
Edward Patel 240b5cfe04 Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 10 years ago
alexborro 4521f6655b Restore "S" parameter of M204 for retrocompatibility. 10 years ago
alexborro 5ddb8d94e2 Update Documentation related to M204 10 years ago
AnHardt f8c4d43886 delta[3] is used with SCARA
Shoot in the dark.
10 years ago
AnHardt 72a9fed4fb codepos not used in gcode_M28()
Got:
Marlin_main.cpp:2567: warning: unused variable 'codepos'

Needs revision.
Don't now how this should look like.
10 years ago
AnHardt b94dd33641 G4 could wait for an undefined time
Got:
Marlin_main.cpp:1689: warning: 'codenum' may be used uninitialized in this function

And indeed codenum is undefined when no parameter is given.
10 years ago
AnHardt e90985a4e8 delta[3] not used when DELTA not defined.
got:
Marlin_main.cpp:387: warning: 'delta' defined but not used

Compiles cleaner when definition is removed.
10 years ago
AnHardt 5099b86ad4 lcd_autostart_sd() has two conditions.
got:
ultralcd.cpp:408: warning: 'void lcd_autostart_sd()' defined but not used
10 years ago
AnHardt 5d81c779cc lcd_control_retract_menu() is conditional.
Got:
ultralcd.cpp:64: warning: 'void lcd_control_retract_menu()' declared 'static' but never defined
10 years ago
AnHardt 450b89e63c Negative times are unlikly
While bunting an other bug I stumbled across:
ultralcd.cpp:1250: warning: comparison between signed and unsigned
integer expressions
Changed to the type of lcd_next_update_millis.
10 years ago
AnHardt d1658eebfc Decrease KILL_DELAY
Users hat to press kill-button for unexpexted lon times.
See #1593
10 years ago
Wurstnase 00adb2a6c1 optional parameters must be named when ignoring order 10 years ago
Edward Patel 0d43898a22 Remove of mesh_plan_buffer_line parameter reference (e) 10 years ago
Edward Patel 8067a985ce Merge branch 'Development' into manual-bed-leveling+mesh-bed-level
Fixed conflicts:
	Marlin/planner.h
10 years ago
wurstnase 05333f61b7 fix macro 10 years ago