microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

Fix temperature min/max test

Browse Source 
- Base tests on all thermistors/thermocouples, not just heater 0
2.0.x
Scott Lahteine 10 years ago
parent b5970492e2
commit 3703694e30
1 changed files with 67 additions and 34 deletions
Show Stats Download Patch File Download Diff File

101
Marlin/temperature.cpp
Unescape Escape View File

@ -145,7 +145,7 @@ static volatile bool temp_meas_ready = false;
static float temp_iState_min_bed;
static float temp_iState_max_bed;
#else //PIDTEMPBED
static unsigned long previous_millis_bed_heater;
static unsigned long previous_millis_bed_heater;
#endif //PIDTEMPBED
static unsigned char soft_pwm[EXTRUDERS];
@ -243,7 +243,7 @@ void PID_autotune(float temp, int extruder, int ncycles)
SERIAL_ECHOLN(MSG_PID_BAD_EXTRUDER_NUM);
return;
}
SERIAL_ECHOLN(MSG_PID_AUTOTUNE_START);
disable_heater(); // switch off all heaters.
@ -755,8 +755,8 @@ void manage_heater() {
#ifdef FILAMENT_SENSOR
if (filament_sensor) {
meas_shift_index = delay_index1 - meas_delay_cm;
if (meas_shift_index < 0) meas_shift_index += MAX_MEASUREMENT_DELAY + 1; //loop around buffer if needed
if (meas_shift_index < 0) meas_shift_index += MAX_MEASUREMENT_DELAY + 1; //loop around buffer if needed
// Get the delayed info and add 100 to reconstitute to a percent of
// the nominal filament diameter then square it to get an area
meas_shift_index = constrain(meas_shift_index, 0, MAX_MEASUREMENT_DELAY);
@ -1259,10 +1259,7 @@ enum TempState {
ISR(TIMER0_COMPB_vect) {
//these variables are only accesible from the ISR, but static, so they don't lose their value
static unsigned char temp_count = 0;
static unsigned long raw_temp_0_value = 0;
static unsigned long raw_temp_1_value = 0;
static unsigned long raw_temp_2_value = 0;
static unsigned long raw_temp_3_value = 0;
static unsigned long raw_temp_value[EXTRUDERS] = { 0 };
static unsigned long raw_temp_bed_value = 0;
static TempState temp_state = StartupDelay;
static unsigned char pwm_count = BIT(SOFT_PWM_SCALE);
@ -1474,7 +1471,7 @@ ISR(TIMER0_COMPB_vect) {
break;
case MeasureTemp_0:
#if HAS_TEMP_0
raw_temp_0_value += ADC;
raw_temp_value[0] += ADC;
#endif
temp_state = PrepareTemp_BED;
break;
@ -1500,7 +1497,7 @@ ISR(TIMER0_COMPB_vect) {
break;
case MeasureTemp_1:
#if HAS_TEMP_1
raw_temp_1_value += ADC;
raw_temp_value[1] += ADC;
#endif
temp_state = PrepareTemp_2;
break;
@ -1513,7 +1510,7 @@ ISR(TIMER0_COMPB_vect) {
break;
case MeasureTemp_2:
#if HAS_TEMP_2
raw_temp_2_value += ADC;
raw_temp_value[2] += ADC;
#endif
temp_state = PrepareTemp_3;
break;
@ -1526,7 +1523,7 @@ ISR(TIMER0_COMPB_vect) {
break;
case MeasureTemp_3:
#if HAS_TEMP_3
raw_temp_3_value += ADC;
raw_temp_value[3] += ADC;
#endif
temp_state = Prepare_FILWIDTH;
break;
@ -1561,19 +1558,19 @@ ISR(TIMER0_COMPB_vect) {
if (temp_count >= OVERSAMPLENR) { // 10 * 16 * 1/(16000000/64/256) = 164ms.
if (!temp_meas_ready) { //Only update the raw values if they have been read. Else we could be updating them during reading.
#ifndef HEATER_0_USES_MAX6675
current_temperature_raw[0] = raw_temp_0_value;
current_temperature_raw[0] = raw_temp_value[0];
#endif
#if EXTRUDERS > 1
current_temperature_raw[1] = raw_temp_1_value;
current_temperature_raw[1] = raw_temp_value[1];
#if EXTRUDERS > 2
current_temperature_raw[2] = raw_temp_2_value;
current_temperature_raw[2] = raw_temp_value[2];
#if EXTRUDERS > 3
current_temperature_raw[3] = raw_temp_3_value;
current_temperature_raw[3] = raw_temp_value[3];
#endif
#endif
#endif
#ifdef TEMP_SENSOR_1_AS_REDUNDANT
redundant_temperature_raw = raw_temp_1_value;
redundant_temperature_raw = raw_temp_value[1];
#endif
current_temperature_bed_raw = raw_temp_bed_value;
} //!temp_meas_ready
@ -1585,31 +1582,67 @@ ISR(TIMER0_COMPB_vect) {
temp_meas_ready = true;
temp_count = 0;
raw_temp_0_value = 0;
raw_temp_1_value = 0;
raw_temp_2_value = 0;
raw_temp_3_value = 0;
for (int i = 0; i < EXTRUDERS; i++) raw_temp_value[i] = 0;
raw_temp_bed_value = 0;
#if HEATER_0_RAW_LO_TEMP > HEATER_0_RAW_HI_TEMP
#define MAXTEST <=
#define MINTEST >=
#define GE0 <=
#define LE0 >=
#else
#define MAXTEST >=
#define MINTEST <=
#define GE0 >=
#define LE0 <=
#endif
if (current_temperature_raw[0] GE0 maxttemp_raw[0]) max_temp_error(0);
if (current_temperature_raw[0] LE0 minttemp_raw[0]) min_temp_error(0);
#if EXTRUDERS > 1
#if HEATER_1_RAW_LO_TEMP > HEATER_1_RAW_HI_TEMP
#define GE1 <=
#define LE1 >=
#else
#define GE1 >=
#define LE1 <=
#endif
if (current_temperature_raw[1] GE1 maxttemp_raw[1]) max_temp_error(1);
if (current_temperature_raw[1] LE1 minttemp_raw[1]) min_temp_error(1);
#if EXTRUDERS > 2
#if HEATER_2_RAW_LO_TEMP > HEATER_2_RAW_HI_TEMP
#define GE2 <=
#define LE2 >=
#else
#define GE2 >=
#define LE2 <=
#endif
if (current_temperature_raw[2] GE2 maxttemp_raw[2]) max_temp_error(2);
if (current_temperature_raw[2] LE2 minttemp_raw[2]) min_temp_error(2);
#if EXTRUDERS > 3
#if HEATER_3_RAW_LO_TEMP > HEATER_3_RAW_HI_TEMP
#define GE3 <=
#define LE3 >=
#else
#define GE3 >=
#define LE3 <=
#endif
if (current_temperature_raw[3] GE3 maxttemp_raw[3]) max_temp_error(3);
if (current_temperature_raw[3] LE3 minttemp_raw[3]) min_temp_error(3);
#endif // EXTRUDERS > 3
#endif // EXTRUDERS > 2
#endif // EXTRUDERS > 1
for (int i=0; i<EXTRUDERS; i++) {
if (current_temperature_raw[i] MAXTEST maxttemp_raw[i]) max_temp_error(i);
else if (current_temperature_raw[i] MINTEST minttemp_raw[i]) min_temp_error(i);
}
/* No bed MINTEMP error? */
#if defined(BED_MAXTEMP) && (TEMP_SENSOR_BED != 0)
if (current_temperature_bed_raw MAXTEST bed_maxttemp_raw) {
target_temperature_bed = 0;
bed_max_temp_error();
}
#if HEATER_BED_RAW_LO_TEMP > HEATER_BED_RAW_HI_TEMP
#define GEBED <=
#define LEBED >=
#else
#define GEBED >=
#define LEBED <=
#endif
if (current_temperature_bed_raw GEBED bed_maxttemp_raw) {
target_temperature_bed = 0;
bed_max_temp_error();
}
#endif
} // temp_count >= OVERSAMPLENR
#ifdef BABYSTEPPING

Write Preview
Loading…
Cancel
Save