Fix custom m-code behavior

Don’t set CUSTOM_M_CODE_SET_Z_PROBE_OFFSET if there’s no Z probe
10 years ago · 5261d35737
parent fbf9b21e0c
commit 5261d35737
12 changed files with 60 additions and 36 deletions
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@ -533,9 +533,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 // Custom M code points
 #define CUSTOM_M_CODES
 #ifdef CUSTOM_M_CODES
-  #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
-  #define Z_PROBE_OFFSET_RANGE_MIN -15
-  #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #ifdef ENABLE_AUTO_BED_LEVELING
+    #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
+    #define Z_PROBE_OFFSET_RANGE_MIN -15
+    #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #endif
 #endif


--- a/Marlin/configurator/config/Configuration.h
+++ b/Marlin/configurator/config/Configuration.h
@ -570,9 +570,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // Custom M code points
 #define CUSTOM_M_CODES
 #ifdef CUSTOM_M_CODES
-  #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
-  #define Z_PROBE_OFFSET_RANGE_MIN -15
-  #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #ifdef ENABLE_AUTO_BED_LEVELING
+    #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
+    #define Z_PROBE_OFFSET_RANGE_MIN -15
+    #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #endif
 #endif

 // @section extras
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@ -512,9 +512,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // Custom M code points
 #define CUSTOM_M_CODES
 #ifdef CUSTOM_M_CODES
-  #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
-  #define Z_PROBE_OFFSET_RANGE_MIN -15
-  #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #ifdef ENABLE_AUTO_BED_LEVELING
+    #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
+    #define Z_PROBE_OFFSET_RANGE_MIN -15
+    #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #endif
 #endif


--- a/Marlin/example_configurations/Felix/Configuration_DUAL.h
+++ b/Marlin/example_configurations/Felix/Configuration_DUAL.h
@ -512,9 +512,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // Custom M code points
 #define CUSTOM_M_CODES
 #ifdef CUSTOM_M_CODES
-  #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
-  #define Z_PROBE_OFFSET_RANGE_MIN -15
-  #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #ifdef ENABLE_AUTO_BED_LEVELING
+    #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
+    #define Z_PROBE_OFFSET_RANGE_MIN -15
+    #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #endif
 #endif


--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@ -540,9 +540,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // Custom M code points
 #define CUSTOM_M_CODES
 #ifdef CUSTOM_M_CODES
-  #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
-  #define Z_PROBE_OFFSET_RANGE_MIN -15
-  #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #ifdef ENABLE_AUTO_BED_LEVELING
+    #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
+    #define Z_PROBE_OFFSET_RANGE_MIN -15
+    #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #endif
 #endif


--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@ -544,9 +544,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // Custom M code points
 #define CUSTOM_M_CODES
 #ifdef CUSTOM_M_CODES
-  #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
-  #define Z_PROBE_OFFSET_RANGE_MIN -15
-  #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #ifdef ENABLE_AUTO_BED_LEVELING
+    #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
+    #define Z_PROBE_OFFSET_RANGE_MIN -15
+    #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #endif
 #endif


--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@ -570,9 +570,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // Custom M code points
 //#define CUSTOM_M_CODES
 #ifdef CUSTOM_M_CODES
-  #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
-  #define Z_PROBE_OFFSET_RANGE_MIN -15
-  #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #ifdef ENABLE_AUTO_BED_LEVELING
+    #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
+    #define Z_PROBE_OFFSET_RANGE_MIN -15
+    #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #endif
 #endif


--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@ -537,9 +537,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // Custom M code points
 #define CUSTOM_M_CODES
 #ifdef CUSTOM_M_CODES
-  #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
-  #define Z_PROBE_OFFSET_RANGE_MIN -15
-  #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #ifdef ENABLE_AUTO_BED_LEVELING
+    #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
+    #define Z_PROBE_OFFSET_RANGE_MIN -15
+    #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #endif
 #endif


--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@ -553,9 +553,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // Custom M code points
 #define CUSTOM_M_CODES
 #ifdef CUSTOM_M_CODES
-  #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
-  #define Z_PROBE_OFFSET_RANGE_MIN -15
-  #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #ifdef ENABLE_AUTO_BED_LEVELING
+    #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
+    #define Z_PROBE_OFFSET_RANGE_MIN -15
+    #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #endif
 #endif


--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@ -555,9 +555,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 // Custom M code points
 #define CUSTOM_M_CODES
 #ifdef CUSTOM_M_CODES
-  #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
-  #define Z_PROBE_OFFSET_RANGE_MIN -15
-  #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #ifdef ENABLE_AUTO_BED_LEVELING
+    #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
+    #define Z_PROBE_OFFSET_RANGE_MIN -15
+    #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #endif
 #endif


--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@ -535,9 +535,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // Custom M code points
 #define CUSTOM_M_CODES
 #ifdef CUSTOM_M_CODES
-  #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
-  #define Z_PROBE_OFFSET_RANGE_MIN -15
-  #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #ifdef ENABLE_AUTO_BED_LEVELING
+    #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
+    #define Z_PROBE_OFFSET_RANGE_MIN -15
+    #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #endif
 #endif


--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@ -542,9 +542,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // Custom M code points
 #define CUSTOM_M_CODES
 #ifdef CUSTOM_M_CODES
-  #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
-  #define Z_PROBE_OFFSET_RANGE_MIN -15
-  #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #ifdef ENABLE_AUTO_BED_LEVELING
+    #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
+    #define Z_PROBE_OFFSET_RANGE_MIN -15
+    #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #endif
 #endif