Moved checks into SanityCheck.h + removed previous added checks.

10 years ago · a9ed39b12d
parent 002340f32c
commit a9ed39b12d
12 changed files with 12 additions and 99 deletions
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@ -431,11 +431,6 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 #endif  // MANUAL_BED_LEVELING

 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
  #define MESH_MIN_X 10
  #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
  #define MESH_MIN_Y 10
@ -456,10 +451,6 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic

 #ifdef ENABLE_AUTO_BED_LEVELING

-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
  // There are 2 different ways to specify probing locations
  //
  // - "grid" mode
--- a/Marlin/SanityCheck.h
+++ b/Marlin/SanityCheck.h
@ -91,6 +91,18 @@
    #error You must enable either DISPLAY_CHARSET_HD44780_JAPAN or DISPLAY_CHARSET_HD44780_WESTERN for your LCD controller.
  #endif

+  /**
+   * Mesh Bed Leveling
+   */
+  #ifdef MESH_BED_LEVELING
+    #ifdef DELTA
+      #error MESH_BED_LEVELING does not yet support DELTA printers
+    #endif
+    #ifdef ENABLE_AUTO_BED_LEVELING
+      #error Select ENABLE_AUTO_BED_LEVELING or MESH_BED_LEVELING, not both
+    #endif
+  #endif
+
  /**
   * Auto Bed Leveling
   */
--- a/Marlin/configurator/config/Configuration.h
+++ b/Marlin/configurator/config/Configuration.h
@ -431,11 +431,6 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 #endif  // MANUAL_BED_LEVELING

 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
  #define MESH_MIN_X 10
  #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
  #define MESH_MIN_Y 10
@ -456,10 +451,6 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic

 #ifdef ENABLE_AUTO_BED_LEVELING

-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
  // There are 2 different ways to specify probing locations
  //
  // - "grid" mode
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@ -369,11 +369,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING

 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
  #define MESH_MIN_X 10
  #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
  #define MESH_MIN_Y 10
@ -392,10 +387,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of

 #ifdef ENABLE_AUTO_BED_LEVELING

-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
  // There are 2 different ways to specify probing locations
  //
  // - "grid" mode
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@ -392,11 +392,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING

 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
  #define MESH_MIN_X 10
  #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
  #define MESH_MIN_Y 10
@ -415,10 +410,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of

 #ifdef ENABLE_AUTO_BED_LEVELING

-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
  // There are 2 different ways to specify probing locations
  //
  // - "grid" mode
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@ -397,11 +397,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING

 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
  #define MESH_MIN_X 10
  #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
  #define MESH_MIN_Y 10
@ -420,10 +415,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of

 #ifdef ENABLE_AUTO_BED_LEVELING

-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
  // There are 2 different ways to specify probing locations
  //
  // - "grid" mode
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@ -421,11 +421,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING

 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
  #define MESH_MIN_X 10
  #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
  #define MESH_MIN_Y 10
@ -444,10 +439,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of

 #ifdef ENABLE_AUTO_BED_LEVELING

-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
  // There are 2 different ways to specify probing locations
  //
  // - "grid" mode
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@ -391,11 +391,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING

 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
  #define MESH_MIN_X 10
  #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
  #define MESH_MIN_Y 10
@ -414,10 +409,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of

 #ifdef ENABLE_AUTO_BED_LEVELING

-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
  // There are 2 different ways to specify probing locations
  //
  // - "grid" mode
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@ -419,11 +419,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING

 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
  #define MESH_MIN_X 10
  #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
  #define MESH_MIN_Y 10
@ -442,10 +437,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of

 #ifdef ENABLE_AUTO_BED_LEVELING

-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
  // There are 2 different ways to specify probing locations
  //
  // - "grid" mode
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@ -419,11 +419,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 #endif  // MANUAL_BED_LEVELING

 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
  #define MESH_MIN_X 10
  #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
  #define MESH_MIN_Y 10
@ -442,10 +437,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o

 #ifdef ENABLE_AUTO_BED_LEVELING

-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
  // There are 2 different ways to specify probing locations
  //
  // - "grid" mode
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@ -389,11 +389,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING

 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
  #define MESH_MIN_X 10
  #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
  #define MESH_MIN_Y 10
@ -412,10 +407,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of

 #ifdef ENABLE_AUTO_BED_LEVELING

-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
  // There are 2 different ways to specify probing locations
  //
  // - "grid" mode
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@ -391,11 +391,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING

 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
  #define MESH_MIN_X 10
  #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
  #define MESH_MIN_Y 10
@ -414,10 +409,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of

 #ifdef ENABLE_AUTO_BED_LEVELING

-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
  // There are 2 different ways to specify probing locations
  //
  // - "grid" mode