diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 9234d2ce7..788ee58ff 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -431,11 +431,6 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
@@ -456,10 +451,6 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/SanityCheck.h b/Marlin/SanityCheck.h
index d92938c1d..d1be7703d 100644
--- a/Marlin/SanityCheck.h
+++ b/Marlin/SanityCheck.h
@@ -91,6 +91,18 @@
     #error You must enable either DISPLAY_CHARSET_HD44780_JAPAN or DISPLAY_CHARSET_HD44780_WESTERN for your LCD controller.
   #endif
 
+  /**
+   * Mesh Bed Leveling
+   */
+  #ifdef MESH_BED_LEVELING
+    #ifdef DELTA
+      #error MESH_BED_LEVELING does not yet support DELTA printers
+    #endif
+    #ifdef ENABLE_AUTO_BED_LEVELING
+      #error Select ENABLE_AUTO_BED_LEVELING or MESH_BED_LEVELING, not both
+    #endif
+  #endif
+
   /**
    * Auto Bed Leveling
    */
diff --git a/Marlin/configurator/config/Configuration.h b/Marlin/configurator/config/Configuration.h
index 025bfea89..e5130531b 100644
--- a/Marlin/configurator/config/Configuration.h
+++ b/Marlin/configurator/config/Configuration.h
@@ -431,11 +431,6 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
@@ -456,10 +451,6 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index 69b602502..9ed947254 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -369,11 +369,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
@@ -392,10 +387,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h
index 39b1198d7..d320e9ea9 100644
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@@ -392,11 +392,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
@@ -415,10 +410,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h
index 31e6f3f4b..fdbb32a86 100644
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@@ -397,11 +397,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
@@ -420,10 +415,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index 283922edd..96e05e656 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -421,11 +421,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
@@ -444,10 +439,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index dd00a4bc8..2bbe50938 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -391,11 +391,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
@@ -414,10 +409,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index a757ff7ab..c5ab70da2 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -419,11 +419,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
@@ -442,10 +437,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index 6ac4669ae..22f4f3f39 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -419,11 +419,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
@@ -442,10 +437,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index 2b6834b61..fffc81c70 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -389,11 +389,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
@@ -412,10 +407,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index 7f4867890..eb0e5a290 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -391,11 +391,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #endif  // MANUAL_BED_LEVELING
 
 #ifdef MESH_BED_LEVELING
-
-  #ifdef DELTA
-    #error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
-  #endif
-
   #define MESH_MIN_X 10
   #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
   #define MESH_MIN_Y 10
@@ -414,10 +409,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
-  #ifdef MESH_BED_LEVELING
-    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
-  #endif // MESH_BED_LEVELING
-
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode