1026e5b071
Replace PLA/ABS preheating with generic
9 years ago
e282d69f63
Print job timer comment changed
9 years ago
4b44a23a36
Add TX-buffer for MarlinSerial
...
Similar to the current Arduino HardwareSerial
but with max. 256 byte buffer-size.
Deactivated by default.
The boards with AT90USB processor (USBCON) already use a TX-buffer.
9 years ago
a129078927
Add an emergency-command parser to MarlinSerial (supporting M108)
...
Add an emergency-command parser to MarlinSerial's RX interrupt.
The parser tries to find and execute M108,M112,M410 before the commands disappear in the RX-buffer.
To avoid false positives for M117, comments and commands followed by filenames (M23, M28, M30, M32, M33) are filtered.
This enables Marlin to receive and react on the Emergency command at all times - regardless of whether the buffers are full or not. It remains to convince hosts to send the commands. To inform the hosts about the new feature a new entry in the M115-report was made. "`EMERGENCY_CODES:M112,M108,M410;`".
The parser is fast. It only ever needs two switch decisions and one assignment of the new state for every character.
One problem remains. If the host has sent an incomplete line before sending an emergency command the emergency command could be omitted when the parser is in `state_IGNORE`.
In that case the host should send "\ncommand\n"
Also introduces M108 to break the waiting for the heaters in M109, M190 and M303.
Rename `cancel_heatup` to `wait_for_heatup` to better see the purpose.
9 years ago
43ff0ce35f
Rewritten FILAMENT_CHANGE_ENABLE feature
9 years ago
7a377c1d75
Add "About Printer" information menu.
...
Includes:
*firmware version / branch / date.
*extruder count
*board information (name, serial details, power supply type)
*thermistors (names, min/max temperatures)
*printer statistics (PRINTCOUNTER details)
Thanks to @thinkyhead for contributions.
9 years ago
f84d85f761
Cleanup extruder runout configs
9 years ago
683975cf90
Fix spelling in a config comment
9 years ago
10da7ac86c
Combine Z raise before/after options
9 years ago
03c70c1990
SERVO_DEACTIVATION_DELAY => SERVO_DELAY
9 years ago
bd01592816
Goodbye MECHANICAL_PROBE
9 years ago
b590a7dee0
Make Z_RAISE_BETWEEN_PROBINGS a more general option
9 years ago
d50539583a
Make XY_PROBE_SPEED a general probe option
9 years ago
2798499b71
XY_TRAVEL_SPEED => XY_PROBE_SPEED
9 years ago
b0e47608e6
Merge pull request #4108 from esenapaj/Fix-for-PR-#4093
...
Fix for PR #4093 (Make Z Probe options independent of ABL), etc
9 years ago
40cd20a236
Fix comments on EXPERIMENTAL_I2CBUS
9 years ago
d583ea852d
Standardize format description of Panel
9 years ago
aa6d35bd49
Move code block of probe to appropriate position
9 years ago
740fb2ce39
Adjust spacing
9 years ago
19fe93a5a9
Clean up configs for Z_MIN_PROBE_REPEATABILITY_TEST
9 years ago
3996242e9d
Allow Z_MIN_PROBE_REPEATABILITY_TEST solo
9 years ago
9beb3f2f5e
Merge pull request #4097 from thinkyhead/rc_fil_runout_cleanup
...
FIL_RUNOUT_INVERTING false by default
9 years ago
f215b30932
Merge pull request #4093 from thinkyhead/rc_probe_without_abl
...
Make Z Probe options independent of ABL
9 years ago
dfbf8b3c2c
FIL_RUNOUT_INVERTING false by default
9 years ago
de12228758
Make Z Probe options independent of ABL
9 years ago
f8c278ce4d
Cartesio UI display option in all configs
9 years ago
bd4ec727e7
Merge pull request #4066 from thinkyhead/rc_M851_with_probe
...
Make M851 standard with a bed probe
9 years ago
eab44b30d4
Safety and serial sections
9 years ago
fc56a547d1
Rename movement section to motion
9 years ago
1000563d80
Make M851 standard with a bed probe
9 years ago
47ce810f52
Remove support for XY servo endstops
9 years ago
d991a4c24a
Merge pull request #4063 from thinkyhead/rc_remove_swp_files
...
Delete mysterious .swp files from #3609
9 years ago
ebbed2975e
Delete mysterious .swp files from #3609
9 years ago
02e5dad29a
Include Croatian in language listings
9 years ago
f639044c24
Merge pull request #3609 from jbrazio/feature/config-version
...
Adds versioning for Configuration.h & Configuration_adv.h
9 years ago
741cda0e47
Follow-up the PR #3676(Advance extrusion algorithm – LIN_ADVANCE)
...
・Update forgotten example configurations
9 years ago
8ccd97e7cc
Updated all example configuration files
9 years ago
16212432c9
G20/21 and M149 support, and code_value() refactor
...
This is an update of MarlinDev PR #196 .
G20/21: support for switching input units between millimeters and
inches.
M149: support for changing input temperature units.
In support of these changes, code_value() and code_value_short() are
replaced with an array of functions which handle converting to the
proper types and/or units.
9 years ago
cd441ce652
SINGLENOZZLE: EXTRUDERS versus HOTENDS
9 years ago
db0fd021d0
Z raise options independent of ABL so G28 can use them
9 years ago
28fb1f8994
Tweak #endif comment for ABL GRID
9 years ago
a0b000d752
Support for SAV_3DGLCD OLED LCD controller
9 years ago
06593833ff
MBL: Move border macros to Configuration_adv.h
9 years ago
92a27c37b3
MBL: Apply https://github.com/MarlinFirmware/Marlin/pull/3903 to example_configurations
9 years ago
fe3122774a
Merge pull request #3806 from thinkyhead/rc_coreyz_support
...
Support for COREYZ. Fixes for COREXY, COREXZ
9 years ago
89e630b2fb
Merge pull request #3808 from thinkyhead/rc_singlenozzle
...
SINGLENOZZLE
9 years ago
95fee8ca81
Add option for CoreYZ kinematics
9 years ago
c5130fd23b
Additional instructions for controller reverse options
9 years ago
69abfef82e
Add "SINGLENOZZLE" extruder option
9 years ago
1a6c72cb57
Apply to the rest of the configs
9 years ago
a469341555
Merge pull request #3800 from jbrazio/feature/move-felix-cfg
...
Moves Felix's dual configuration to a folder
9 years ago
80f05920c5
Moves Felix's dual configuration to a folder
9 years ago
8218558953
Update comments, rename next_ping_ms, followup to #3797
9 years ago
07c9a11c3c
Automatically set X2 stepper pins
9 years ago
3016dfe484
Merge pull request #3744 from thinkyhead/rc_bezier_curves
...
Add BEZIER_CURVE_SUPPORT — G5 command
9 years ago
6d722716f7
Follow-up the PR #3720 and #3759
...
Update forgotten Configuration_DUAL.h
9 years ago
f9a62f6a8e
Added PRINTJOB_TIMER_AUTOSTART section to example config files
9 years ago
ddac17a195
Add BEZIER_CURVE_SUPPORT (G5 XYZEFIJPQ)
9 years ago
9f6b8f7d5b
Remove extra @section directive from configs
9 years ago
f13c4a9ec4
Merge pull request #3720 from jbrazio/feature/host-keepalive
...
Removes the DISABLE from HOST_KEEPALIVE
9 years ago
b74af78736
Make arc support (G2/G3) configurable
...
Saves about 2669 bytes when deactivated. (About 1% for a AT2560, about __4%__ for a AT644!)
9 years ago
14cd0f4c92
Merge pull request #3740 from thinkyhead/rc_lcd_home_options
...
Individual Axis Homing LCD menu items
9 years ago
69511b5e5e
Follow-up the PR #3719(Harmonize LCD comment section)
...
It update forgotten Configuration_DUAL.h.
9 years ago
09150cae79
Individual Axis Homing LCD menu items
9 years ago
4dc4e2063f
Add REVERSE_ENCODER_DIRECTION option
9 years ago
85b2c80838
Updated example configurations
9 years ago
5373ac6373
Updated example configurations
9 years ago
212b17d510
Fix for PR #3526(Configuration.h LCD & SDCard s...
...
Fix for PR #3526(Configuration.h LCD & SDCard section rewrite)
It removes duplicated BQ_LCD_SMART_CONTROLLER.
9 years ago
2fa4bc344c
Some clean-up for example configuration files
...
Some clean-up for example configuration files
Follow-up and fix the PR #3253(Make the Autotune item(s) in the LCD menu optional):
・Update forgotten file(Felix/Configuration_DUAL.h)
Follow-up the PR #3526(Configuration.h LCD & SDCard section rewrite):
・Add section of RigidBot Panel to RepRapWorld/Megatronics/Configuration.h
Follow-up the PR #3576(Z Safe Homing for all):
・Adjust spacing
Follow-up and fix the PR #3625(Print job statistics):
・Update forgotten file(Felix/Configuration_DUAL.h)
・Remove ambiguous character "f" in top of RigidBot/Configuration.h
9 years ago
fbf69081b4
Updated comment for THERMAL_PROTECTION_BED
9 years ago
908229dbb3
Introduce temp watch protection for the bed
...
When setting the bed temp via M140/M190 if the thermistor does not read an increase of WATCH_BED_TEMP_INCREASE degrees by WATCH_BED_TEMP_PERIOD seconds then it will throw "Error:Heating failed, system stopped! Heater_ID: bed" and call the kill() function.
Conflicts:
Marlin/Configuration_adv.h
9 years ago
c3ef9993b9
Merge pull request #3625 from jbrazio/feature/print-counter
...
Print job statistics
9 years ago
e34f4653ef
Fixed a typo on the configuration files
9 years ago
27088e356f
Updated example configuration files
9 years ago
924285afa6
Merge pull request #3641 from thinkyhead/rc_reverse_menu_doc
...
Correct the REVERSE_MENU_DIRECTION comment
9 years ago
f1b00eb12b
Correct the REVERSE_MENU_DIRECTION comment
9 years ago
0c11566f42
Replace LANGUAGE_INCLUDE with LCD_LANGUAGE
9 years ago
259794c0be
Make DISPLAY_CHARSET_HD44780 a single setting
9 years ago
7de0161204
Updated example config files
9 years ago
0c2aa92b07
Z Safe Homing for all
...
The `Z_SAFE_HOMING` feature is coupled with probes and not leveling, so
make it available for general use.
9 years ago
339b5b3e34
Patch more configs with new changes
9 years ago
a8e4d7c135
Merge pull request #3477 from alephobjects/BedTempHysteresis
...
Implementation of M190 bed temp hysteresis
9 years ago
1cc622b167
Fix minor spelling in comments
9 years ago
de8c0baf8b
Update some comments in Configuration.h
9 years ago
69c00aea4c
Include bed hysteresis setting in the example configs
9 years ago
f8e10ff1d8
Merge pull request #3491 from thinkyhead/rc_mechanical_probe
...
Support for "mechanical probe" with Allen Key as a special case
9 years ago
7eb476597f
Update some comments in Configuration.h
9 years ago
2eb1b102f8
Support for "mechanical probe" with Allen Key as a special case
9 years ago
50c3140040
Merge pull request #3414 from thinkyhead/rc_host_timeout_mods
...
Host Keepalive configurable timeout with 2s default
9 years ago
dd3a06a95a
Implemented M155 and M156, a generic TWI/I2C interface for Marlin
9 years ago
2eca8d63b3
Add DEFAULT_KEEPALIVE_INTERVAL setting
9 years ago
868eebfdee
Simplify configuration of Z2 endstops
9 years ago
e5771346a4
Drop DISABLE_M(IN|AX)_ENDSTOPS, replace with individual endstop flags
9 years ago
ffe054c129
Fix comment about host keepalive interval
9 years ago
1a79b13b7a
FILAMENT_SENSOR -> FILAMENT_WIDTH_SENSOR
9 years ago
3b2d159abd
Relax the test for "Heating failed" errors
9 years ago
53cc6cca46
Formalize some dependencies on PIDTEMPBED
9 years ago
4b31c67dce
Add PID_AUTOTUNE_MENU option
9 years ago
e08915a723
Fix comments in Configuration_adv.h
9 years ago
0da744b7b0
Further cleanup of comments, partial Doxygen-style
...
Following up on #3231
9 years ago
5e5d250832
Added gplv3 header to all Marlin files
9 years ago
da9d4c4caf
Merge pull request #3206 from esenapaj/patch-5
...
Follow-up the PR #3082 , etc
9 years ago
fc75e6f92d
Follow-up the PR #3082 , etc
...
Follow-up the PR #3082
Follow-up the commit 143ad74: unnoticed updates
Fix for commit b0f5ba0: Z offset: -front [of the nozzle] +behind -> Y offset: -front [of the nozzle] +behind
Standardize the writing method: Z-probe, z-probe -> Z Probe
Adjust spacing
9 years ago
22299c13c1
Change link to the document
...
documentation/LCDLanguageFont.md moved to http://www.marlinfirmware.org/ at commit 12d0983757http://www.marlinfirmware.org/ isn't working.
9 years ago
be08eb6153
Merge pull request #3194 from jbrazio/feature/add-pt_pt-utf8
...
Add pt_pt-utf8 language pack and fix some minor compiler warnings
9 years ago
d1ff7959b7
Merge pull request #3188 from esenapaj/patch-1
...
follow-up the commit b82d91e
9 years ago
1cc316f1fd
Merge pull request #3082 from thinkyhead/updated_2820
...
This is quite comprehensive. If probes are disabled in any case when they shouldn't be, I'm sure we will hear about it soon.
9 years ago
1aa531a3db
Missing coma comment correction for all config files
9 years ago
68dda08fff
Added pt_pt-utf8 language pack; Fixed some minor compiler warnings; Harmonize file suffix for the current existing UTF8 language packs; Updated all configuration files to reflect the new language packs
9 years ago
468df96b0f
follow-up the commit b82d91e
...
follow-up the commit b82d91eca6
9 years ago
32f75749e4
Merge pull request #3117 from Blue-Marlin/thermal-protection
...
Improve the descriptions for THERMAL_PROTECTION
9 years ago
37eaa1406b
follow-up the PR #3180
9 years ago
198d5d56fd
follow-up the PR #3183
9 years ago
3166aed087
Improve the descriptions for THERMAL_PROTECTION
9 years ago
3f45a1acf9
Check probes only when deployed
...
Aim: Test probes in update_endstops only when activated
Changes:
Configurations
Add define for FIX_MOUNTED_PROBE to handle the situation where formerly ENDSTOPS_ONLY_FOR_HOMING had to be set, or lowering the nozzle below Z_PROBE_OFFSET_FROM_EXTRUDER could give an "endstop hit" message.
Add define for Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN to indicate a common situation, that we have a probe but it is connected to an endstop pin
Add some comments
Shift some entries to have related things together.
Conditionals.h
We have a probe (HAS_Z_MIN_PROBE) if one of the pins is defined AND one of the probes is defined.
SanityCheck.h
Add some tests if the probe is connected and if we have defined a probe.
stepper.cpp
Changes to test the probe only when it is deployed (z_probe_is_active).
Test update_endstops() when the probe is deployed.
MarlinMain.cpp
a. set and reset z_probe_is_active in deploy_z_probe(), stow_z_probe() and dock_sled()
b. set and reset z_probe_is_active in the case a z-servo is moved to a defined position. The only remaining unhandled servo move is in M280 where we do not end in a defined position. If you want to handle a probe use M401/402
c. skip deploying/stowing when already deployed/stowed in the dedicated deploy/stow functions.
d. Handle the new FIX_MOUNTED_PROBE in parallel to a servo driven probe/endstop.
To do: In another PR. handle all probes in deploy/stow_z_probe.
Sort out SERVO_LEVELING vs. HAS_SERVO_ENDSTOPS.
9 years ago
9bf87aac6a
Merge pull request #3127 from thinkyhead/rc_core_babystepping
...
Implement BABYSTEPPING for COREXY and COREXZ
9 years ago
7ec7bb31c4
Send a Busy signal to hosts during long processes, wait for input, etc
...
If Marlin is blocking the serial input or command queue for any length
of time (for example more than 2 seconds), it needs to send a message
to serial out to inform the host that it is busy. Marlin should only
send these messages out when busy, and preferably not when trying to
print formatted output.
9 years ago
e5fd43f343
Implement BABYSTEPPING for COREXY and COREXZ
9 years ago
d56c6af24e
Merge pull request #3114 from thinkyhead/rc_reverse_lcd_menu
...
Option to reverse the click-wheel direction in menus
9 years ago
b8b51d8da8
Add the REVERSE_MENU_DIRECTION option
9 years ago
cc9968f893
Patch spacing in #3140
9 years ago
1c384930f3
Merge pull request #3140 from thinkyhead/rc_fix_macro_expansion
...
Wrap macros to prevent bad expansions
9 years ago
c16c47954c
Merge pull request #3141 from esenapaj2/RCBugFix
...
follow-up the PR #3131
9 years ago
30c3a21d1f
Merge pull request #3112 from thinkyhead/rc_support_MAX31855
9 years ago
2179f598bf
Merge pull request #3122 from thinkyhead/rc_group_filament_change
9 years ago
236a44c83b
follow-up the PR #3131
...
follow-up the commit 7326d63ce0
9 years ago
f9ded2a7c4
Wrap macros to prevent bad expansions
9 years ago
0c48eaf3de
Expose motor current in more configs, disable by default
9 years ago
27f244ba2c
Support MAX31855 as Temperature Sensor -3
9 years ago
ce639b8b03
Group FILAMENT_SENSOR options together
9 years ago
fd5414c6ea
Z_RAISE_BEFORE_HOMING -> MIN_Z_HEIGHT_FOR_HOMING
...
rebased
corrected spelling
changed to #elif for error
Still with MIN_Z_HEIGHT_FOR_HOMING but con be done with (folder wide) search-replace when we have a better name.
9 years ago
29e09c7c3e
update example configurations
...
update old comments
update or delete deprecated definitions
complement forgotten updates
adjust spacing
some cosmetic changes
9 years ago
13ef12ad3f
Fix power calculations
...
As suggested by @max-pau in #3073 - #3074
9 years ago
5cba0210f2
Small patch to Z_SAFE_HOMING comment
9 years ago
143ad74db7
Update PROBE_OFFSET_FROM_EXTRUDER comment section in all example config
...
files.
9 years ago
e7cf85b922
Merge pull request #3013 from thinkyhead/esenapaj-patch-1
...
Enhanced #3010 - formal Mesh/Manual dependency
9 years ago
eb85342fd9
Merge pull request #2989 from AnHardt/fix2661
...
Pre home display - Stepper release
9 years ago
772460a7b8
Various minor spelling corrections
...
Redo of #2939 rebased against RCBugFix
9 years ago
9eb4aceee4
Merge pull request #2986 from thinkyhead/enable_watchdog
...
Enable USE_WATCHDOG by default
9 years ago
615bec2329
Activate warning about possible reduced accuracy by default
...
Renamed `WARN_REDUCED_ACCURACY` to `DISABLE_REDUCED_ACCURACY_WARNING`
Changed the condition for blinking from
```
#if ENABLED(WARN_REDUCED_ACCURACY)
```
to
```
#if DISABLED(DISABLE_REDUCED_ACCURACY_WARNING)
```
9 years ago
4b02f33e69
Distribute config-changes to the other configurations
9 years ago
1093c780c8
Remove obsolete STEPS_MM_E setting
9 years ago
c2e5c6c12c
Nest Manual Bed Leveling options
...
This formalizes the dependency of MANUAL_BED_LEVELING on
MESH_BED_LEVELING
9 years ago
fbfbc5e330
Enable USE_WATCHDOG by default
9 years ago
9df0e0e0cc
Merge pull request #2974 from thinkyhead/sanitycheck_spi_speed
...
Sanity-check deprecated options replaced by SPI_SPEED
9 years ago
b19b272172
Update configurations with SPI_SPEED
...
- Include aligned comment about new SDSUPPORT behavior
9 years ago
27d918d836
Merge pull request #4 from MarlinFirmware/RCBugFix
...
Rc bug fix
9 years ago
159ff94afd
Remove obsolete HEATER_BED_DUTY_CYCLE_DIVIDER #2977
9 years ago
b58083b0fa
Getting rid of SDEXTRASLOW, SDSLOW variables.
9 years ago
1b7c443628
Adding SDULTRASLOW variable.
...
Instead of changing SDEXTRASLOW variable to a slower speed, the new
SDULTRASLOW is used for rigidbot panel.
9 years ago
d7272e3f36
Merge pull request #3 from MarlinFirmware/RCBugFix
...
Rc bug fix
9 years ago
71aafb79a0
Update Configuration_adv.h
9 years ago
2c9e0415c7
Getting rid of SDEXTRASLOW, SDSLOW variables.
9 years ago
e6cc232184
Adding SDULTRASLOW variable.
...
Instead of changing SDEXTRASLOW variable to a slower speed, the new
SDULTRASLOW is used for rigidbot panel.
9 years ago
0b429461d5
Back port Cosmetic changes
9 years ago
0cebe85e65
Clean up spacing and duplicate entries
...
• Removing trailing whitespace
• Adjusting indention for better readability
• Removing duplicated entries
9 years ago
e7b40bbe98
Change link to U8glib source
9 years ago
c956b52c4a
Babystep Multiplier
...
Analog to https://github.com/MarlinFirmware/MarlinDev/pull/250 by
@RicardoGA
Restore the Babystep Multiplicator functionality and now it's available
for X/Y/Z
9 years ago
9b23490f01
Clean up spacing in configs
9 years ago
0ad25c6665
Hint for changed behaviour of SDSUPPORT
9 years ago
e01f5e1ef7
Cleanup
9 years ago
5e36b64635
SDEXTRASLOW for some SD card readers (PR#176)
...
Add SDEXTRASLOW which runs the SD card at SPI_QUARTER_SPEED. Quarter speed is needed for RIGIDBOT_PANEL
9 years ago
db27e67580
Apply PID_ADD_EXTRUSION_RATE to extras
9 years ago
28599c51c7
Wrap Dual Y options in a conditional
9 years ago
11a065c0ca
Remove Z2 pins overrides from Configuration_adv.h
9 years ago
6292d9e815
Rename ENABLE_AUTO_BED_LEVELING
...
With the introduction of the #if ENABLED(…)
reads better than
9 years ago
9897a9147c
Update ABL comments (PR#95)
...
* Updates the auto bed leveling comments ONLY.
* Renames "Z probe" word usage in //comments and #errors properly.
9 years ago
a7822e3ff7
Some renaming of Z_PROBE to Z_MIN_PROBE (PR#91)
...
* Fix a couple of renames omission and macro expansion errors.
9 years ago
e2d69f66b2
Make Z_PROBE a Z_MIN_PROBE (PR#65)
...
Currently we use the probe exclusively as a device to find the build platform(bed).
For the currently supported setups this means, we use it as a additional min-endstop.
A triggered when not deployed probe disturbs the homing process for max-endstops.
Rename ENDSTOPPULLUP_ZPROBE to ENDSTOPPULLUP_ZMIN_PROBE
Rename Z_PROBE_ENDSTOP_INVERTING to Z_MIN_PROBE_ENDSTOP_INVERTING
Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP
Rename DISABLE_Z_PROBE_ENDSTOP to DISABLE_Z_MIN_PROBE_ENDSTOP
Rename Z_PROBE_REPEATABILITY_TEST to Z_MIN_PROBE_REPEATABILITY_TEST
Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP
Adjust comments accordingly
Remove Z_MAX check for the probe in update_endstops().
Using an delta related idea of @clefranc from #61 ,
extended to the general change for all setups.
Tested with Prusa i3, max-z-endstop and permanently triggered z-probe.
Worked for @clefranc's delta.
10 years ago
46453905d6
Apply remaining ENABLED/DISABLED conditionals
10 years ago
b227d8c128
Supply a VERSION in a short form for displays
...
The long descriptor will still be available in M115
10 years ago
329acc852e
Canonize Option flag USE_AUTOMATIC_VERSION
10 years ago
80f2a20842
Enable bootscreen in all Configurations
10 years ago
1e2deff4fd
Rename BTENABLED to BLUETOOTH
...
- For some reason it’s easy to forget what BT stands for, but it
doesn’t need an abbreviation.
10 years ago
270c766de2
SDCARDDETECT -> SD_DETECT, added docs
...
- `SD_DETECT_PIN` replaces `SDCARDDETECT`
- `SD_DETECT_INVERTED` replaces `SDCARDDETECTINVERTED`
- Revise the description of `SD_DETECT_INVERTED`
- Add a note about the override of `SD_DETECT_INVERTED` in
`Conditionals.h`
10 years ago
37d1879386
Apply overridables to Configuration files
10 years ago
edaaead7e0
Fix comment about SERVO_ENDSTOP_ANGLES
10 years ago
0af2a80e06
Make SERVO_ENDSTOP_ANGLES 2-dimensional
10 years ago
ab6f1fdf8b
Move & document ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED (PR#2528)
...
As suggested in #2521
- Move `ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED` because `SDSUPPORT` is
also required.
- Add a note that endstops must be enabled for the feature to have any
effect
10 years ago
fd0e81b0c7
Distinguish between BUZZER and SPEAKER (PR#2513)
...
A speaker needs a AC or a pulsed DC to make a sound, a buzzer only needs a DC.
A buzzer has it's own resonator. It works in most cases to feed the buzzer with a pulsed DC, but the sound will not be as loud as with pure DC.
There seem to be boards where the BEEPER-pin is not able to handle a PWM. Obviously intended for a buzzer.
To make these board able to handle a speaker
* replace the PWM based tone()-function again with a on-delay-off-delay loop.
Hopefully the last time I touch the beeper code.
10 years ago
8b876241bd
Some more servo code tweaks
...
Just set up the pin. Don't move to a random position.
Simplify servo::move()
* servo::move() does not need the pin parameter - The pin is set during servo_init() with attach().
* servo::move() does not need a return value.
SERVO_LEVELING is the wrong condition to deactivate the servos.
Remove some temporary (Servo *) variables.
SanityCheck for the servo indexes.
10 years ago
90f8ddfc1e
Apply MINIPANEL to other configs
10 years ago
d85861d296
Move macros, add ENABLED/DISABLED, add includes
10 years ago
129f986ccf
Add COREXZ option to configurations
10 years ago
391386dd94
Update configs for new servo deactivation
10 years ago
c3c605c658
Move note about LiquidTWI2 to Configuration.h (PR#2406)
10 years ago
dc40a5f6e0
Patch up more outdated config lines
10 years ago
a274769f4f
Clean up spacing and comments
...
Also clean up some trailing spaces in a few other sources
10 years ago
d3bce05d54
Fix up spacing for filament sensor values
10 years ago
b4b10a57fe
Fix configurator section directives and values lists
10 years ago
bba14dcbe6
Move Z Safe Homing point to the middle of the movement range
10 years ago
c85a486445
make the dual z-endstop optional (PR#2277)
...
it's disabled by default
10 years ago
58941e543e
ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED removed
...
#defining something just to define something else doesn’t
make sense
If you want SDCARDDETECTINVERTED, just define it yourself.
If the previous code was intended to define, undefined and then again define the term, that code is improper.
10 years ago
3a5963c0e7
Configuration_adv.h: Add FAN_MIN_PWM for slow fan stopping issue …
...
* all Configuration_adv.h: Add #define FAN_MIN_PWM for slow fan stopping
issue
* for K8200: uncommented with tested (and working) values
10 years ago
08968c29bb
Adding ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED to Examples
10 years ago
d1f4471000
Merge pull request #2146 from Wackerbarth/Versioning
...
Versioning
10 years ago
d46d9d998e
Add maximum bed integral term in example configurations.
10 years ago
5ea139fd79
Revised Versioning mechanism
10 years ago
38cc0b93c6
Merge pull request #1874 from AnHardt/Bulgarian
...
Introduction of Bulgarian - language_bg.h
10 years ago
50bd7493cc
Merge pull request #2108 from thinkyhead/m33_long_filename_host_support
...
M33 LONG_FILENAME_HOST_SUPPORT
10 years ago
9b8c6ed254
Merge pull request #2120 from chris-bo/dogm_config
...
move dogm font selection to configuration_adv.h
10 years ago
06513565e9
Merge pull request #2105 from eboston/Development
...
Add ELB_FULL_GRAPHIC_CONTROLLER with ADAFRUIT_ST7565 display.
10 years ago
082ed3beed
Propagate Configuration.h changes
...
Updated all the example Configuration.h files for the new display type.
10 years ago
e353d27430
Merge branch 'Development' of https://github.com/MarlinFirmware/Marlin into Bulgarian
10 years ago
258bcdefe0
move dogm font selection to configuration_adv.h
10 years ago
7750180c93
transpire -> expire
...
Minor wording correction.
10 years ago
0f2c9bacfd
M33 LONG_FILENAME_HOST_SUPPORT
10 years ago
76438195f0
NO_TIMEOUTS and ADVANCED_OK off by default
10 years ago
d693e0f378
Use WATCH_TEMP_INCREASE + TEMP_HYSTERESIS + 1 as difference limit
10 years ago
747fd5801c
Merge pull request #2055 from thinkyhead/thermal_unified
...
Combine thermal runaway and watch-period
10 years ago
429c6ccad2
Neaten config formatting
10 years ago
8a0dc4d54a
Merge pull request #1922 from Wurstnase/serial_wait
...
Serial wait
10 years ago
526ad82d20
activate advanced_ok and no_timeout
10 years ago
2445ae3d3a
Combine thermal runaway and watch-period
...
- Make thermal protection for all hotends and/or bed into simple
switches
- Now enable `WATCH_TEMP_PERIOD` when `THERMAL_PROTECTION_HOTENDS` is
enabled
- Move detailed thermal parameters to `Configuration_adv.h`
- Add sanity checks to warn about old configurations
- Change `WATCH_TEMP_PERIOD` to seconds instead of milliseconds
10 years ago
79106638a8
Fix documentation of heating sanity check
10 years ago
6110494a56
Change default to 4°C in 16s
10 years ago
54deb9eea3
Enable WATCH_TEMP_PERIOD by default
10 years ago
deedb00c18
Document WATCH_TEMP_PERIOD
10 years ago
7f3252eea9
Merge pull request #1999 from paclema/Filrunout_configurable_script
...
Added configurable script for filrunout from configuration.h
10 years ago
181ccc884c
Edit thermal runaway description
10 years ago
aedd580911
Updated all configuration.h examples
10 years ago
425cd46c12
Merge pull request #1993 from AnHardt/TRP-bed
...
Enable TRP for the bed
10 years ago
514d8ac460
Enable TRP for the bed
...
in all Configurations.
10 years ago
2610b8d047
Enable thermal runaway protection by default
10 years ago
b4b19a6cbd
Merge https://github.com/MarlinFirmware/Marlin into Bulgarian
...
Conflicts:
Marlin/Configuration.h
Marlin/configurator/config/Configuration.h
Marlin/example_configurations/Felix/Configuration.h
Marlin/example_configurations/Felix/Configuration_DUAL.h
Marlin/example_configurations/Hephestos/Configuration.h
Marlin/example_configurations/K8200/Configuration.h
Marlin/example_configurations/SCARA/Configuration.h
Marlin/example_configurations/WITBOX/Configuration.h
Marlin/example_configurations/delta/generic/Configuration.h
Marlin/example_configurations/delta/kossel_mini/Configuration.h
Marlin/example_configurations/makibox/Configuration.h
Marlin/example_configurations/tvrrug/Round2/Configuration.h
Conflicts with my Chinese implementation resolved.
10 years ago
3688256f86
Merge pull request #1974 from thinkyhead/eeprom_in_gcode
...
Make EEPROM reproducible in GCode
10 years ago
0970102950
Remove obsolete STRING_URL
10 years ago
0f687b5dda
Merge branch 'Development' into eeprom_in_gcode
...
Latest upstream commits
10 years ago
28aef684b4
Merge pull request #1957 from Voxel8/sjk/home_y_before_x
...
Allow Y to home before X with option in Configuration_adv.h.
10 years ago
2bc1d70a31
Merge pull request #1977 from AnHardt/Cinese2
...
We mark this historic day, when Marlin went to China.
10 years ago
5b248757c7
Level Bed in Prepare submenu
...
- Add “Level Bed” menu item for auto bed leveling
- Hide the option if homing has not been done yet
- Arrange the Prepare submenu more logically (?)
- Add documentation comments, some white-space
- Apply some coding standards here and there
- Move old encoder multiplier debug option to `ultralcd.cpp`
10 years ago
98ca46006c
Allow Y to home before X with option in Configuration_adv.h.
...
This addresses comments in #1956 and #1079 . In particular, this is useful
when both endstops are stationary on a CoreXY system, and the Y axis needs
to be homed before the X so the flags are aligned.
10 years ago
6cba6bcd82
Add 'cn' to the other 'Configuration.h's
10 years ago
0fca084ea6
Make EEPROM reproducible in GCode
...
With these changes the output of `M503 S0` is all you need to restore
the EEPROM. Building on this it is straightforward to save and restore
the EEPROM state using the SD card or external GCode file.
- Added `M145` to set “heatup states” for the LCD menu
- Added `M420` to toggle Mesh Bed Leveling
- Added `M421` to set a single Mesh coordinate
- Extended `Config_PrintSettings` with added M codes
- Cleaned up some comments here and there
10 years ago
5c29fda167
Add a warning for DISABLE_[XYZ] options
10 years ago
3b97a7d446
Merge pull request #1944 from AnHardt/beep2
...
More Beeper clean up
10 years ago
064f2b37d0
More Beeper clean up.
...
Centralised beep code to lcd_buzz().
From gcode_M300() and lcd_quick_feedback().
Enforced max. duration for M300 to 5 seconds.
Corrected description in 'Configuration.h'
LCD_FEEDBACK_FREQUENCY_HZ 0 gives now a silent delay of
LCD_FEEDBACK_FREQUENCY_DURATION_MS.
10 years ago
b99e63a7bf
Fixed compilation error "error: stray ‘\357’ in program" in several configuration files.
...
Introduced in commit 697ee2dc
10 years ago
ccbe2c4ea3
Apply CUSTOM_MACHINE_NAME to configurations
...
- Replace “Mendel” with “RepRap”
10 years ago
56fc3a4835
bgr -> bg
...
+ update in documentation
10 years ago
585eee6549
Z Probe inverting not present in example configs, causes error
...
The line const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to
invert the logic of the endstop is in the main configuration.h but
wasn't present in the example configuration.h's. Causes a compiling
error with Z Probe enabled. Just added it to all the configs. :)
10 years ago
c5961892e3
Bulgarian for all the Configuration.h's
10 years ago
4788b59300
Thermistor values for configurator
10 years ago
7431ef7e2d
Merge branch 'Development' into dev_version
...
Latest upstream commits
10 years ago
eb6e3886f4
Set version to "1.0.3 dev"
10 years ago
a9ed39b12d
Moved checks into SanityCheck.h + removed previous added checks.
10 years ago
002340f32c
Merge branch 'Development-Marlin' into Development
10 years ago
7d2c2f1790
Updates for the configurator
...
- Sections in all `Configuration_adv.h`
- Recognize JAPANESE/WESTERN/CYRILLIC options
- Better capturing of comments for tooltips
10 years ago
967db181d0
Latest upstream commits
10 years ago
d27c82a450
Added check for Delta printers in Mesh, #error not yet supported.
10 years ago
9a093b2e8f
Added #error + mention not to enable ABL and Mesh at the same time
10 years ago
61de6ecd54
Added change to example Configuration.h's
10 years ago
c065da52ec
Spacing and spelling
10 years ago
e0d4368cb5
Minor code cleanup, move NUM_AXIS out of config
10 years ago
a469d796e1
Add cleanups needed for #1772
10 years ago
0e8182bbf2
Additional pin tests, cleanup
10 years ago
cda4bd4ad9
Correct the comment about M206
10 years ago
ba2c7cb467
Update configs with all the latest
10 years ago
5eff15c409
Merge branch 'Development' into fixup_leveling
...
Latest upstream commits
10 years ago
5261d35737
Fix custom m-code behavior
...
Don’t set CUSTOM_M_CODE_SET_Z_PROBE_OFFSET if there’s no Z probe
10 years ago
94330705c7
Move definition of PIDdT back to temperature.h
...
make it unconditional
remove all definitions in the 'Configuration.h's
remove form 'Conditionals.h'
10 years ago
8db4fd7177
Merge branch 'Development' into planner_oh_planner
...
Latest upstream commits
10 years ago
0d81abe1c9
Merge branch 'Development' into config_testing
...
Latest upstream commits
10 years ago
01740fd9c6
Merge branch 'Development' into planner_oh_planner
...
Latest upstream commits
10 years ago
e6f6c6e3a1
fix bad insertion config again
10 years ago
34a41648ab
Merge branch 'Development' into planner_oh_planner
...
Latest upstream commits
10 years ago
4fbb80567e
Get upstream commits
10 years ago
146501215f
Fix mangled probe_pt calls
...
- Address issue #1669
- Remove the TOPO_ORIGIN configuration setting
10 years ago
88e81a4804
Latest upstream commits, plus fixes
...
- Also add Manual Bed Leveling to the rest of the configs
10 years ago
2c9bd15625
Move LCD items to `Conditionals.h`
...
- `Conditionals.h` is included twice, setting LCD values the first time
10 years ago
63d5d28085
Merge branch 'Development' into config_testing
...
Latest upstream changes
10 years ago
b6d381f863
Divide up Conditionals to get LCD items early
10 years ago
e85061d20d
Added changes to the 'new' Configuration.h s
10 years ago
8ade04b78e
Felix and Hephestos configs
...
- Not sure why these are showing as all new
10 years ago
670006b919
Remove invariant code from Configurations
...
- Add `Conditionals.h` with calculated configuration values
- Add `SanityCheck.h` with checks for configuration errors
- Remove equivalent code from all configurations
- Move error checks from some sources to `SanityCheck.h` also
- Fix initialization of count_direction in stepper.cpp
10 years ago
a686c9878f
Move TOPO_ORIGIN define to Configuration.h
...
- Addressing issue #1608
10 years ago
4d878b9bac
Fixed path typos in README
10 years ago
12ec557a75
Added DEFAULT_TRAVEL_ACCELERATION
10 years ago
1d25d510bc
Upstream Merge Fixes
10 years ago
0a7d85c20e
Minor fixes
10 years ago
d8eeddfb93
Updated DUAL Extruder config, added README and enabled NEWPANEL by default
10 years ago
b423b90c77
Added Configuration_adv.h to examples for LCD/SD Support
10 years ago
7540a81106
Minor fixes
10 years ago
08bc723a3c
Enable PIDBED
10 years ago
e487bd642b
Updated PR to streamline integration
10 years ago
Scott Lahteine