Remove Z2 pins overrides from Configuration_adv.h

9 years ago · 11a065c0ca
parent f7f6b5faae
commit 11a065c0ca
14 changed files with 0 additions and 56 deletions
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@ -144,10 +144,6 @@
  // Play a little bit with small adjustments (0.5mm) and check the behaviour.
  // The M119 (endstops report) will start reporting the Z2 Endstop as well.

-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
-  #define Z2_DIR_PIN E2_DIR_PIN
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
-
  // #define Z_DUAL_ENDSTOPS

  #if ENABLED(Z_DUAL_ENDSTOPS)
--- a/Marlin/configurator/config/Configuration_adv.h
+++ b/Marlin/configurator/config/Configuration_adv.h
@ -144,10 +144,6 @@
  // Play a little bit with small adjustments (0.5mm) and check the behaviour.
  // The M119 (endstops report) will start reporting the Z2 Endstop as well.

-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
-  #define Z2_DIR_PIN E2_DIR_PIN
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
-
  // #define Z_DUAL_ENDSTOPS

  #if ENABLED(Z_DUAL_ENDSTOPS)
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@ -152,10 +152,6 @@
  // Play a little bit with small adjustments (0.5mm) and check the behaviour.
  // The M119 (endstops report) will start reporting the Z2 Endstop as well.

-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
-  #define Z2_DIR_PIN E2_DIR_PIN
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
-
  // #define Z_DUAL_ENDSTOPS

  #if ENABLED(Z_DUAL_ENDSTOPS)
--- a/Marlin/example_configurations/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h
@ -152,10 +152,6 @@
  // Play a little bit with small adjustments (0.5mm) and check the behaviour.
  // The M119 (endstops report) will start reporting the Z2 Endstop as well.

-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
-  #define Z2_DIR_PIN E2_DIR_PIN
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
-
  // #define Z_DUAL_ENDSTOPS

  #if ENABLED(Z_DUAL_ENDSTOPS)
--- a/Marlin/example_configurations/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/K8200/Configuration_adv.h
@ -152,10 +152,6 @@
  // Play a little bit with small adjustments (0.5mm) and check the behaviour.
  // The M119 (endstops report) will start reporting the Z2 Endstop as well.

-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
-  #define Z2_DIR_PIN E2_DIR_PIN
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
-
  // #define Z_DUAL_ENDSTOPS

  #if ENABLED(Z_DUAL_ENDSTOPS)
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@ -144,10 +144,6 @@
  // Play a little bit with small adjustments (0.5mm) and check the behaviour.
  // The M119 (endstops report) will start reporting the Z2 Endstop as well.

-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
-  #define Z2_DIR_PIN E2_DIR_PIN
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
-
  // #define Z_DUAL_ENDSTOPS

  #if ENABLED(Z_DUAL_ENDSTOPS)
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@ -152,10 +152,6 @@
  // Play a little bit with small adjustments (0.5mm) and check the behaviour.
  // The M119 (endstops report) will start reporting the Z2 Endstop as well.

-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
-  #define Z2_DIR_PIN E2_DIR_PIN
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
-
  // #define Z_DUAL_ENDSTOPS

  #if ENABLED(Z_DUAL_ENDSTOPS)
--- a/Marlin/example_configurations/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/TAZ4/Configuration_adv.h
@ -152,10 +152,6 @@
  // Play a little bit with small adjustments (0.5mm) and check the behaviour.
  // The M119 (endstops report) will start reporting the Z2 Endstop as well.

-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
-  #define Z2_DIR_PIN E2_DIR_PIN
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
-
  // #define Z_DUAL_ENDSTOPS

  #if ENABLED(Z_DUAL_ENDSTOPS)
--- a/Marlin/example_configurations/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h
@ -152,10 +152,6 @@
  // Play a little bit with small adjustments (0.5mm) and check the behaviour.
  // The M119 (endstops report) will start reporting the Z2 Endstop as well.

-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
-  #define Z2_DIR_PIN E2_DIR_PIN
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
-
  // #define Z_DUAL_ENDSTOPS

  #if ENABLED(Z_DUAL_ENDSTOPS)
--- a/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
@ -152,10 +152,6 @@
  // Play a little bit with small adjustments (0.5mm) and check the behaviour.
  // The M119 (endstops report) will start reporting the Z2 Endstop as well.

-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
-  #define Z2_DIR_PIN E2_DIR_PIN
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
-
  // #define Z_DUAL_ENDSTOPS

  #if ENABLED(Z_DUAL_ENDSTOPS)
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@ -152,10 +152,6 @@
  // Play a little bit with small adjustments (0.5mm) and check the behaviour.
  // The M119 (endstops report) will start reporting the Z2 Endstop as well.

-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
-  #define Z2_DIR_PIN E2_DIR_PIN
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
-
  // #define Z_DUAL_ENDSTOPS

  #if ENABLED(Z_DUAL_ENDSTOPS)
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@ -152,10 +152,6 @@
  // Play a little bit with small adjustments (0.5mm) and check the behaviour.
  // The M119 (endstops report) will start reporting the Z2 Endstop as well.

-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
-  #define Z2_DIR_PIN E2_DIR_PIN
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
-
  // #define Z_DUAL_ENDSTOPS

  #if ENABLED(Z_DUAL_ENDSTOPS)
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@ -152,10 +152,6 @@
  // Play a little bit with small adjustments (0.5mm) and check the behaviour.
  // The M119 (endstops report) will start reporting the Z2 Endstop as well.

-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
-  #define Z2_DIR_PIN E2_DIR_PIN
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
-
  // #define Z_DUAL_ENDSTOPS

  #if ENABLED(Z_DUAL_ENDSTOPS)
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@ -152,10 +152,6 @@
  // Play a little bit with small adjustments (0.5mm) and check the behaviour.
  // The M119 (endstops report) will start reporting the Z2 Endstop as well.

-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
-  #define Z2_DIR_PIN E2_DIR_PIN
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
-
  // #define Z_DUAL_ENDSTOPS

  #if ENABLED(Z_DUAL_ENDSTOPS)