64d629ba2a
[2.0.x] Italian language fix ( #11796 )
6 years ago
06949ae510
Fix MSG_FILAMENT_CHANGE_HEAT_1 for small LCD
6 years ago
d882717d98
Save some PROGMEM with constexpr ( #11798 )
...
When possible, make `active_extruder` a `constexpr` to save some PROGMEM.
6 years ago
4f883d5971
[2.0.x] Extruder-Distinct Linear Advance K Factors ( #11789 )
6 years ago
2ebfe90be9
Add custom preheat temp to filament change ( #11475 )
6 years ago
72af8e0f02
Patch extruder_advance_K edit menu
...
Fix #11776
6 years ago
eafd62308e
Use TMC2208Stepper v0.2.5 ( #11714 )
6 years ago
beb51c2d58
Show manual extrusion moves as relative in LCD
...
- Implements FR#11724
- Old behavior can be restored by commenting out MANUAL_E_MOVES_RELATIVE
6 years ago
12fded46c2
Correct some FR strings
...
Co-Authored-By: pipersw <pipersw@users.noreply.github.com>
6 years ago
8b837dc3ad
No need for last \n in G-code items
6 years ago
d1ceaf5550
[2.0.x] Followup to IDEX changes ( #11707 )
6 years ago
7680b64aa6
IDEX clean up ( #11690 )
6 years ago
66de50f5f8
Updated slovak translation ( #11684 )
6 years ago
0966bdcbc4
Reorganized ultralcd menu (10317) ( #10360 )
...
Replaced "Prepare" and "Control" menus with "Movement", "Temperature", "Configuration" and "Advanced Settings"
6 years ago
0f14977b5d
LIGHTWEIGHT_UI: Allow feedrate % to exceed 255% ( #11656 )
...
- Changed type of integer used for feedrate percentage from uint8_t to uint16_t.
6 years ago
a15e570d3b
Fix SD progress with Lite Status Screen
...
Co-Authored-By: Lê Hoàng <icy.lord.love.angel@gmail.com>
6 years ago
acf5ae3083
!ENABLED => DISABLED
6 years ago
3671c63cde
Einsy Full Graphic LCD Fix ( #11604 )
...
Fixed issue with LCD timings for Einsy RAMBo board.
6 years ago
c2553f9888
2.0.x - Idex match119 ( #11556 )
...
* Update ubl_G29.cpp
* Update ultralcd.cpp
6 years ago
67613bf5bd
Update Czech translations ( #11510 )
6 years ago
c64199941e
Compile only selected PIO environment ( #11519 )
6 years ago
6964e1a95a
Clean up trailing whitespace
6 years ago
f891416e70
No raise on G28 after power-loss
6 years ago
f2224755ad
Fix jumping progress bar. ( #11439 )
...
- When LCD_SET_PROGRESS_MANUALLY was disabled and an SD print was not active (i.e. the printer was idle), progress_bar_percent would read uninitialized memory from stack and cause progress bar to jump wildly.
- Also updated conditions in `#ifdef` to match `ultralcd.cpp`
7 years ago
64c493ad82
MKS_12864_OLED code cleanup
7 years ago
094e6d81a5
Add Einstart-S support ( #11219 )
...
Indeed the HAL does not need to be mucked around with to expose ATmega2560 pins not available as numbers on the MEGA board, I'll need to update the wiki with that tidbit and a reference to the pin-mapping comment in `fastio_1280.h`.
7 years ago
aadcf08913
[2.0.x] add Calibrate Z (M915) to Prepare Menu ( #11331 )
7 years ago
9c2bfa2ab3
Remove extra parameter to enqueue. ( #11364 )
7 years ago
8c40f0c6c7
Reduce TQ message code size
7 years ago
b04e0c0cbb
Malyan LCD feedrate, better temp handling.
7 years ago
065e9c3d66
Add card.longest_filename method
7 years ago
8c57cadbe7
Include stdlib in fontutils ( #11251 )
...
When `REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER` is defined and Re-ARM build is attempted, `u8g_fontutf8.cpp` includes `fontutils.h` which uses `abs()`.
However, `abs()` is defined in `stdlib.h` which is not included in `fontutils.h`, so compile fails with an error.
Include `stdlib.h` in `fontutils.h` so that `abs()` is defined before `u8g_fontutf8.cpp` needs to use it, resolving the compile error.
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
7 years ago
20761b88e0
Merge pull request #11212 from AlexanderAmelkin/2.0-HD44780-remove-unused-include
...
[2.0.x][HD44780] Remove unused include
7 years ago
603e136e87
Resolve issue where user can't edit UBL's mesh
7 years ago
ed720194d2
[2.0.x][HD44780] Remove unused include
...
The <binary.h> header is not available in STM32 toolchain
and is not used anywhere in ultralcd_common_HD44780.h.
If it is used anywhere in HD44780 support for other platforms,
it must be included in the corresponding .cpp file directly
and put under appropriate conditional compilation directives
for the platform requiring it.
As I was unable to find such code, I consider the file unused
and hence remove the inclusion.
7 years ago
1367df2875
Replace double with float, optimize calculation
7 years ago
1a0f4dedad
Fix and improve POWER_LOSS_RECOVERY ( #11187 )
7 years ago
8299ac121d
[2.0.x] Slovak translation update ( #11175 )
7 years ago
3de0c85d41
Fix RRW graphical LCD constructor macro ( #11171 )
7 years ago
fbf1c9b496
Fix and tweak POWER_LOSS_RECOVERY ( #11151 )
7 years ago
3349eb0020
Fix SKEW_CORRECTION compile error
7 years ago
3b3029c4bf
Make max_e_jerk an array to reduce CPU usage ( #11118 )
7 years ago
383129728a
Edit Z fade as whole numbers
7 years ago
1239e8eda2
Fix value editing with callback
7 years ago
a65d15c905
[2.0.x] Fix Italian msg len ( #11058 )
...
Fix message to long for 12864 display
7 years ago
9d04f47d98
Improvements for junction_deviation_mm
...
- Drop `max_jerk` with `JUNCTION_DEVIATION`
- Add `max_e_jerk_factor` for use by `LIN_ADVANCE`
- Recalculate `max_e_jerk_factor` when `junction_deviation_mm` changes
- Fix LCD editing of `junction_deviation_mm`
7 years ago
f2c3b0d476
Use bit flags for homed/known
7 years ago
ae07a3e4aa
Multiplier edit large ranges
7 years ago
20a5db03bb
Junction Deviation limit (0.01 to 0.3)
7 years ago
a2f521d34b
Add Junction Deviation mm runtime setting ( #10990 )
7 years ago
779d4a17a0
Highlight 64128N and common ST7565 difference
...
Followup to #10920 , addressing #10962
7 years ago
334341c632
Hephestos config updates ( #10960 )
7 years ago
eb1026d438
[2.0.x] Fix compile warning ( #10931 )
7 years ago
2fd9ba56da
LED menu item bool (like Case Lights)
7 years ago
61181b7f24
Add macros for ST7565 commands
7 years ago
d259070980
Clean up trailing spaces from vim, etc.
7 years ago
945139e328
Clean up some formatting
7 years ago
cf7d5a642a
Fix manual moves for switching tools ( #10868 )
7 years ago
1da2c4f1c1
Text LCD display routine fix. Coauthored with @MagoKimbra ( #10864 )
7 years ago
6f330f397e
[2.0.x] Buffer overflow and scroll fix, UTF8 cleanup ( #10844 )
7 years ago
d74e333c0f
Make sure FAN_ANIM_FRAMES is defined
7 years ago
336a022529
Support Malyan LCD without SD
7 years ago
5f8591528e
Remove #pragmas that don't help c files
7 years ago
c89649b46e
Suppress U8glib build warnings
7 years ago
ee333f6be2
Followup to endstops tweaks
7 years ago
1af98519cd
Group and adjust LCD buttons code
7 years ago
68d7fcec83
Simplify and fix Z fade height edit
...
Fix #10761
7 years ago
a11eb50a3e
Refactor and optimize Stepper/Planner
...
Better encapsulation and considerably reduce stepper jitter
7 years ago
228139eae6
Tweak some LCD comments
7 years ago
3c76bda2d8
Fix switching extruder
...
`DONT_SWITCH` got lost along the way. Replace it with `DO_SWITCH_EXTRUDER` and adjust the code.
7 years ago
c173a31060
Fix some compile warnings
7 years ago
0ea60d506a
Clear up LCD-related compile issues
7 years ago
3f6073e23a
Followup tweak to lcdprint_u8g.cpp
7 years ago
fb608938f8
Prevent compilation of unused u8g-oriented code
7 years ago
f07260c33f
Don't babystep on long click unless printing
...
As pointed out in #10731
7 years ago
99ecdf59af
Smarter MIN, MAX, ABS macros
...
Use macros that explicitly avoid double-evaluation and can be used for any datatype, replacing `min`, `max`, `abs`, `fabs`, `labs`, and `FABS`.
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
7 years ago
083ec9963e
Tweaks to heater / lcd conditions
7 years ago
9d98a62699
Followup to HAL optimizations and delays
...
- Cleanups, fixes for Due HAL code.
- TC_IER is write-only. Use TC_IMR to test ISR state.
7 years ago
a1062eec5b
Better handling of DELAY_NS and DELAY_US ( #10716 )
...
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
7 years ago
306f0f2135
Move Stepper::synchronize to Planner ( #10713 )
...
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
7 years ago
325bbbc8c2
[2.0.x] Enable AD595 and AD8495 in concert ( #10693 )
...
* Allow both AD595 and AD8495 in concert
* General temperature code tweaks
7 years ago
265161ba30
Blink the value for unhomed/unknown axes ( #10670 )
7 years ago
d1b619be52
Standardize some hexadecimals
7 years ago
ec05408453
Add 3-frame fan animation to bitmaps ( #10654 )
7 years ago
a1fab8336e
Fix abort of SD printing
7 years ago
81b632c255
Additional temp-oriented improvements
7 years ago
e911635fb1
Add thermocouple with AD8495 support
7 years ago
410b023b50
[2.0.x] Add Viki support to RAMPS_FD_V1 (DUE) ( #10598 )
7 years ago
b7e938a9fb
LCD_BED_LEVELING enables a sub-menu for ABL
7 years ago
a90d99c27c
Rename float32 => float52, etc.
7 years ago
05fca752d6
Clean up autostart handling
7 years ago
05c33833e7
[2.0.x] Add NO_LCD_MENUS option ( #10582 )
7 years ago
524cc392f4
Fix sd_status comparison
...
Co-Authored-By: perkmeister <perkmeister@users.noreply.github.com>
7 years ago
9e0d99c0c6
Round all floats in string conversion functions ( #10566 )
7 years ago
f423e54f77
Strip trailing spaces
7 years ago
8177c4334e
Merge pull request #10498 from xC0000005/MalyanLCDFix
...
Fix overridden Malyan LCD functions
7 years ago
cb46cb8480
Add HAS_HEATED_BED conditional ( #10495 )
7 years ago
24d23ce49b
Fix function definitions for Malyan LCD
7 years ago
9e07df5c1b
Extra options for LEVEL_BED_CORNERS ( #10483 )
7 years ago
023385ca59
Merge pull request #10479 from thinkyhead/bf2_creality_power_loss_resume
...
[2.0.x] Creality3D Power-Loss Recovery
7 years ago
3396671011
[2.0.x] Reset LCD status to fallbacks ( #10470 )
...
* Remove obsolete strings
* Tweak some static consts
* Reset LCD status to fallbacks
7 years ago
d58450c82a
Russian language update
...
Co-Authored-By: anton-piliugin <34044202+anton-piliugin@users.noreply.github.com>
7 years ago
11ab017dd0
Creality3D Power-Loss Recovery
7 years ago
78ea4871f9
Fix up enqueue now functions
...
…and apply to MALYAN_LCD.
7 years ago
8ca3c43d73
Updated language_data spacing, headers
7 years ago
184c077c58
Correct includes (u8g.h) and spelling
7 years ago
627348b46c
move the TALL_FONT_CORRECTION to language files
7 years ago
77bc653524
Use X windows 6x12 bitmap font to support western languages.
7 years ago
d81649b365
Update language data for sk.
7 years ago
41839746a2
Removed unused macros
7 years ago
df2f24617b
Use 0 as the bed position (not Z_MIN_POS)
7 years ago
744bcaee61
[2.0.x] Fix problems compiling with Arduino IDE ( #10441 )
...
* Fix problems compiling u8glib utf8 support on Arduino
* Change header in auto-generated font data
* Change include in font gen scripts
7 years ago
e4acd2c40e
One fewer compare in _lcd_move_xyz
7 years ago
6cb83758d7
Fix Brazilian Portuguese language duplicates
7 years ago
6c7a17dba6
Abort SD printing more safely ( #10407 )
...
Allow the current command to complete when aborting an SD print, otherwise some commands (G28, G29, etc.) will cause trouble.
7 years ago
9f8a96fb8a
Brazilian Portuguese update ( #10409 )
7 years ago
93273a4c9e
Fix u8g.h search path error ( #10419 )
...
Support env MARLIN_LANGS for user select generated language, and update doc; update script to generate dogm_font_data_ISO10646_1.h automatically.
7 years ago
584735c994
u8g.h => clib/u8g.h
7 years ago
6c535081ec
[2.0.x] Add optional menu item to toggle software endstops ( #10389 )
7 years ago
0535ebc4d2
MESH_BED_LEVELING before PROBE_MANUALLY
7 years ago
12785583d0
[2.0.x] G33 MIN_STEPS_PER_SEGMENT ( #10386 )
7 years ago
c96412a78f
[2.0.x] UTF-8 language translation support ( #10213 )
7 years ago
646aa20b43
Overhaul of G33 Delta Calibration ( #8822 )
7 years ago
a6485456df
Fix LIGHTWEIGHT_UI with UBL
...
See https://github.com/MarlinFirmware/Marlin/issues/10317#issuecomment-379100702
7 years ago
4dc7e64789
Update Slovak language
...
Based on #10313 by @rmoravcik
7 years ago
6ce060cfe0
[2.0.x] Update language_it.h ( #10322 )
...
Updated to #10296
7 years ago
051303ad42
Russian language updates
...
From #10311 by @anton-piliugin
7 years ago
2fa0a73c2c
Implement filament change continuous purge
7 years ago
8bc93c6f2b
Improve heating/cooling LCD messages ( #10293 )
7 years ago
a019eebdd6
support utf8 unicode for test language ( #10220 )
7 years ago
adcb87f0db
Z Endstop Servo => Z Probe Servo
7 years ago
31df43212c
Use lcd_printPGM_utf in more places
...
Fix #10256
7 years ago
6098efcc59
Use float62 for LCD edit of Z Fade
7 years ago
f04be05a14
"G28 Z Forbidden" => "Home XY first"
...
Some languages will need to be updated for proper phrasing
7 years ago
9d2ea5d64b
Undo German changes
...
See 941e9bd329 (commitcomment-28262166)
7 years ago
7dc256432f
Restore STM32F1 series to working order. ( #10229 )
...
The `_O2` attribute is no longer needed on the malyanlcd function, and the macros have broken timer numbers - reset this to a function to return the right device. Also fix the bit order cast in SPI.
7 years ago
aa6dacbbdf
German update
...
Based on #10216
7 years ago
8322a79bb9
update the UTF-8 C strings for Chinsee languages, for Simplified and Traditional Chinese ( #10211 )
7 years ago
1cb810ff1c
[2.0.x] Automatically reset stepper timeout ( #10179 )
...
* Automatically reset stepper timeout in manage_inactivity
Any code that adds moves to the planner can skip resetting the stepper timeout. We can let `idle` / `manage_inactivity` reset the timer whenever it detects any moves in the planner.
* blocks_queued => has_blocks_queued
7 years ago
7308ef7809
Add conditional, give DUE SPI a unique name, fix compiler warnings ( #10168 )
7 years ago
fbdc5ad962
Prevent lcd_update stack overflow on SD Card change
7 years ago
c24dbcbfe1
When STATUS_EXPIRE_SECONDS is 0, hide the position. ( #10081 )
...
Some users may prefer to hide the position updates on the `LIGHTWEIGHT_UI` altogether. This leads to an even less cluttered display (it also saves on SPI traffic and one byte of RAM).
7 years ago
f1327fd5f9
Use lcd_goto_previous_menu_no_defer more
7 years ago
65ce0303f8
Fix MKS_12864_OLED blank issue
...
Fixes #10071
7 years ago
5dec828abc
Add MKS_12864OLED to lcd_implementation_init
...
Followup to #7914
7 years ago
51ebdf3b7d
Finish scroll_screen with menu direction/multiplier
...
Fixes #10041
7 years ago
0d8c15c01f
restore PR 9661 files & V1 fix
7 years ago
bf59a4a6df
Revert "[2.0.x] DUE compatibility with shared SPI LCDs, USB mass storage, add pin defs & update examples\MakerParts\Configuration.h"
7 years ago
914bb80bde
removed SDSS init
...
added device & comm drivers for shared SPI LCDs
mistyped some updates in ultralcd_impl_DOGM.h
remove unwanted changes in onfiguration.h
still can't type
Update HAL_LCD_class_defines.h
include USB mass storage & misc
7 years ago
3c2bfa5e53
Update powersupply_on in power_on/off ( #10015 )
...
Fix #10004
7 years ago
1913c37a91
Tweak to manual move eindex arg
7 years ago
03e3011332
Fix compile error with MAX_MESSAGE_LENGTH
...
Fix #9988
7 years ago
ca577c1638
Fix up various spacing, comments, and typos
7 years ago
be0e100fed
Fix sd subdirectory encoder position
...
Followup to 7e386c7
7 years ago
04dedc7ed8
always completely initialize display ( #9981 )
7 years ago
0149680f54
Fix compile error with char LCD
7 years ago
7e386c7e98
Fix encoder position for sddirectory
7 years ago
22a017a856
Rebuild SD file sort array on Stop SD Print ( #9976 )
...
Thanks Chuck Hellebuyck.
7 years ago
fd883c909a
Improvements to Lightweight ST7920 status screen. ( #9952 )
...
- Show units on lightweight status screen.
- Fixed progress bar so it works with M73
7 years ago
f9cafc4001
Fix menu highlight glitch, tweak scrolling code ( #9957 )
7 years ago
2d1233b86c
Fix lcd_quick_feedback call for BTN_BACK
7 years ago
eb8b758226
Fix some mapper, charsize problems ( #9866 )
7 years ago
8bffb26c23
Fix manual move position display
...
Manual moves now correctly include the workspace offset.
7 years ago
bd0967ad87
Fix BTN_BACK
...
Followup to #9835
7 years ago
d9a98b5814
Russian language update
...
From #9849
7 years ago
35ec67885a
Add support for BACK button (RADDS) ( #9835 )
7 years ago
4817c78a65
Add files via upload ( #9828 )
7 years ago
eb079959fb
Report sd card progress [FR] #9751 ( #9832 )
...
* SD Status auto-report feature
Feature Request #9751
7 years ago
19ba91f77a
Fix lcd_custom_bootscreen compiler warning
7 years ago
2024775e07
Spanish (UTF8) Language ( #9786 )
...
From #7314 by @MrAmericanMike
7 years ago
43ff15244d
Fix a progress bar condition
7 years ago
4d588b2d6a
Further fix of LCD_PROGRESS_BAR ( #9783 )
7 years ago
e749945317
Un-pause print on cancel ( #9780 )
7 years ago
8f9262f3fe
Fix path to _Statusscreen.h
7 years ago
0542b03750
Fix bootscreen include path
...
Fix #9759
7 years ago
2bd252b501
[2.0.x] LIN_ADVANCE v1.5 ( #9712 )
7 years ago
a6b7e721cf
Slovak language update
7 years ago
2c9775313a
Fix Z position on HD44780
...
Fix #9732
7 years ago
9c9cd54ef3
Add Z Fade Height edit to UBL and Tune submenus ( #9738 )
7 years ago
3851ffce0f
Merge pull request #9637 from marcio-ao/pr-lite-st7920-status
...
[2.0.x] Light-weight status screen for ST7920 based printers
7 years ago
424b9a83cd
Slovak language update
...
From @rmoravcik at #9760
7 years ago
532bb3aaa1
Lightweight status screen for ST7920
...
- This status screen uses the ST7920 character generator to greatly
reduce SPI traffic and MCU load when updating the status screen.
- Has been tested with the RepRapDiscount Full Graphics Smart Controller
but should work with any LCD that uses an ST7920 or fully compatible
controller.
7 years ago
72f63a4980
Fix DOGM progress bar with LCD_SET_PROGRESS_MANUALLY
7 years ago
343c17d5b3
Reduce Creality3D bootscreens flash usage ( #9752 )
7 years ago
9f0907d40c
Fix big edit font width calculation
...
Fix #9685
7 years ago
4303f2e377
Fix MALYAN_LCD message bugs
...
Fix #9711
Replacing #9731
7 years ago
47d529aac5
move #include <U8glib.h>
7 years ago
fc460fff94
Extend menu items for SWITCHING_EXTRUDER
...
Reference #5367
7 years ago
25e3e62354
Null-terminate lcd_status_message
7 years ago
83d7e95de0
Add MSG_THERMAL_RUNAWAY_BED ( #9691 )
7 years ago
e05673a379
[2.0.x] VIKI2 & RE_ARM changes ( #9686 )
...
* VIKI2 & RE_ARM changes
1. Remove `DISABLED(SDSUPPORT)` from ST7565 in `ultralcd_impl_DOGM.h`. These LCDs share pins with the SD card and can run at the SD card rates.
2. Add SDSS definition to `pins_RAMPS_RE_ARM.h`. Apparently the SDSS definition in `pins.h` is being processed before the one in `spi_pins.h` which resulted in not being able to read the SD card.
7 years ago
f6cc89ec7c
LCD_PROGRESS_BAR w/out SDSUPPORT for character LCD
7 years ago
168af8bacb
Allow LCD_SET_PROGRESS_MANUALLY without SDSUPPORT
7 years ago
bf5df306e1
Fix compile error with SHOW_BOOTSCREEN disabled
...
Fix #9530
Fix #9524
7 years ago
3021058e6d
Fix non-UTF8 Czech language
7 years ago
1f8f8c9104
Merge pull request #9657 from petrzjunior/bugfix-2.0.x
...
[2.0.x][Language] Update Czech (Advanced pause...)
7 years ago
cff62042ee
Fix LCD manual movement on kinematic machines ( #9655 )
7 years ago
5d9e16ea49
Update Czech advanced pause
7 years ago
b648999528
Merge pull request #9624 from Bob-the-Kuhn/RRD-8-bit-code-to-2.0.x
...
[2.0.x] Add delays to AVR driver for RRD Full Graphic Smart Controller
7 years ago
93c0198b2d
Init LCD welcome message programmatically
7 years ago
67a4cc610b
French update
...
Based on #9610
7 years ago
e7b50c89b0
Fix #9201
...
FILAMENT_LCD_DISPLAY can work with SDSUPPORT
7 years ago
9a423e9a89
tested
7 years ago
f8912bb19f
French update
...
Based on #9590 by @studiodyne
7 years ago
e6b8207b03
Restore welcome message
7 years ago
38c7d53bf7
Repair some spacing
7 years ago
5785bbb491
Updated french translation ( #9556 )
7 years ago
299606e4ae
[2.0.x] Memory overflow protection ( #9562 )
7 years ago
5a70887467
Size lcd_status_message based on language ( #9545 )
7 years ago
545cd8fa60
Tweak malyanlcd.cpp
7 years ago
9854262334
[2.0.x] Fix compile warning ( #9539 )
7 years ago
d42a87cb31
Update language Italian
...
From #9508 by @tnw513
7 years ago
2538f019d0
Update language Basque-Euskera
...
From #9514 by @1138-4EB
7 years ago
16739264d3
Add UltiController v2.1 support
...
Add compatibility with the original screen bord from Ultimaker 2 printer (UltiController v2.1 with the PG-2864ALBP I2C display)
7 years ago
38d62494ef
Adjustment to DOG_CHAR_*_EDIT
7 years ago
766faa05a9
sp
7 years ago
e5ee0b6f6c
Implement MALYAN_LCD
7 years ago
2ea4e74ed3
Misc. comments
7 years ago
786746404b
[2.0.x] Apply feedrate to nozzle movement for kinematic machines ( #8778 )
7 years ago
e1fd9c08b3
[2.0.x] Add support for LPC1769 at 120 MHz ( #9423 )
7 years ago
9e13d1fad5
[2.0.x] Fix temperature out of LCD ( #9461 )
...
Fix bug introduced in #9415
7 years ago
d6e29e9597
Update French language
...
Based on #9373 by @nikkoura
7 years ago
79796b22ad
Fix up _Bootscreen.h and _Statusscreen.h
7 years ago
21179f8300
Fix the "slow" version of the G-code parser
7 years ago
6339b506c0
Make sure binary.h is included as needed
7 years ago
266086670b
Better LCD message when heating needed
7 years ago
61bf8478a2
Add hotEnough methods
7 years ago
07db5638e2
Add a heating indicator X offset
7 years ago
719cd53e09
Standardized max temp values
...
Everywhere in menu items temperatures are "defined value" subtracted by 15.
In one place is subtracted by 5
7 years ago
c7bad74d8f
Merge pull request #9202 from benlye/m73-bugfix
...
[2.0.x] Fix progress bar duration when time is exactly 86400s
7 years ago
f5f1b069ad
Convert UBL mesh tilting to all use the same algorithm ( #9204 )
...
A number of regressions were patched also. The UBL G29 P2 and P4 Press and Hold had stopped working. It is very possible this is broken in the bugfix_v1.1.x branch also.
The main purpose of the Pull Request is to get the 3-Point mesh tilting to use the LSF algorithm just like the grid based mesh tilt. This simplifies the logic and reduces the code size some what. But the real reason to do it is the 3-Point case can be solved exactly. And by feeding these numbers into the LSF algorithm it provides a way to check all that code for 'correctness'.
7 years ago
554d849827
Fix duration when time is exactly 86400s
7 years ago
fa432508b0
Followup to Ender config
7 years ago
f887719a40
Creality Ender board support
7 years ago
02ff12d491
More up front option to show SD percentage
7 years ago
e633ce06c7
LCD contrast type mismatch is back
...
WORKS!
7 years ago
3a99dc7c5c
2.0.x Fix compiler warning ( #9116 )
...
Fix duplicate language define warning
7 years ago
f26805e862
[2.0.x] UBL Mesh Storage Message ( #9095 )
7 years ago
5fb6dd1424
Bmp fix
...
Clockwise arrow fixed
7 years ago
cb0e826c5d
Merge pull request #9068 from Bob-the-Kuhn/SD-detect
...
[2.0.x] SD card detect improvement
7 years ago
f72b0a7b04
1234
7 years ago
e89f1453ab
UBL G29 works without settings.load()
7 years ago
1c41de16d4
Trailing whitespace clean
7 years ago
7541316bb4
Add M701/M702 Filament Load/Unload, M603
7 years ago
81211da7b4
M701 / M702 language changes
7 years ago
455592eee8
Improvements to LCD menu macros
7 years ago
4626d04067
as good as i can get it
...
minor edits to force new Travis test (last one timed out)
Update u8g_com_HAL_DUE_st7920_sw_spi.cpp
initial power up display garbage gone
7 years ago
e43f3ac989
EEPROM init fix
7 years ago
fc67c64b8f
Merge pull request #8989 from tcm0116/2.0.x_ubl
...
[2.0.x] Fix UBL compilation warnings
7 years ago
8afc4f8d9d
Fix UBL compilation warnings
7 years ago
e9fc7bc69c
Merge pull request #9000 from Bob-the-Kuhn/2.0-LCD-contrast
...
[2.0.x] lcd_contrast type mismatch work around
7 years ago
39e5fabfa9
Z BabyStepping should not be dependent on a bed leveling system being active
7 years ago
ef911a2d12
works
7 years ago
2929c9e56f
A specific option to SLIM_LCD_MENUS
7 years ago
615146c069
Enqueue commands better in ultralcd.cpp
7 years ago
2526ac6500
Display up to 3 extruders on char LCD
...
…and show bed level indicator at the position of the [H] icon, when a heated bed exists.
7 years ago
db32c185ae
Merge pull request #8860 from Bob-the-Kuhn/2.0.x-DUE-RRDFGSC
...
[2.0.x] DUE - update for Reprap Discount Full Graphic Smart Controller
7 years ago
9ecdd1f4c7
Multi extruder support for M600 and LCD
7 years ago
a1ce6e8ff4
Clear lcd_clicked immediately on use
7 years ago
f163eede78
No sub-menu if NO_VOLUMETRICS
...
For parity with #8911
7 years ago
1a827d5b68
Opening brace tweaks
7 years ago
a142fab155
Enable RRDFGSC on Due
7 years ago
4ef965cc40
Fix compiler warnings
7 years ago
4b49ea1e92
General cleanup of config-store, reset_bed_level
7 years ago
4a8fd8ae92
Merge pull request #8853 from ejtagle/bugfix-2.0.x
...
USB Mass Storage Implementation / CDC with HW flow control and misc fixes and improvements for Arduino DUE/RE-ARM based boards
7 years ago
69a51a426c
Update Czech language Dec 2017
7 years ago
99b2fc2066
Adjusted timings on the ST7290 u8glib so RE-ARM and RAMPS4DUE have no problems when writing to the graphics LCD. This fixes Issue #8787 - Special thanks to Bergerac56 for testinf this out !!!
7 years ago
933f76fda3
Option to disable all volumetric extrusion
7 years ago
de5ca96654
More parity with 1.1.x, plus whitespace
7 years ago
b055d8c39c
[2.0.x] Adding support for using the MKS_12864OLED with the SSD1306 controller ( #8814 )
...
* Adding support for using the MKS_12864OLED with the SSD1306 controller
* Update comment for correct controller type
7 years ago
cf2193c07f
Comment, fix filament width sensor
7 years ago
ac168a03c8
Fixes for the Arduino DUE HAL (Serial Port, Graphics Display, EEPROM emulation) ( #8651 )
...
* Fixing the DUE serial port assignments: Now -1 means the SAM3x USB Device emulating a serial port, and 0 means the USB to serial adapter included as a programming port
* Improving the Fast IO port access implementation on Arduino DUE
* Implemented EEPROM emulation on Due by storing data on the internal FLASH (with wear leveling)
* Implemented a Software SPI for the ST7920 graphics display for the Arduino RAMPS for DUE, as the default one in u8glib is clocking data too fast on ARM, and the display does not understand it.
* Fixing the case where the serial port selected is the USB device
* Adding configuration for the Makerparts 3D printer (www.makerparts.net)
* Tuned MakerParts acceleration on X and Y axis so it never loses steps. Also adjusted pulses per mm to match default hw configuration
* Fine tuned Maximum acceleration for MakerParts printer
* Style cleanup
* Style cleanup (2)
* Style fixes (3)
* Fixing the DUE serial port assignments: Now -1 means the SAM3x USB Device emulating a serial port, and 0 means the USB to serial adapter included as a programming port
* Improving the Fast IO port access implementation on Arduino DUE
* Implemented EEPROM emulation on Due by storing data on the internal FLASH (with wear leveling)
* Implemented a Software SPI for the ST7920 graphics display for the Arduino RAMPS for DUE, as the default one in u8glib is clocking data too fast on ARM, and the display does not understand it.
* Fixing the case where the serial port selected is the USB device
* Adding configuration for the Makerparts 3D printer (www.makerparts.net)
* Tuned MakerParts acceleration on X and Y axis so it never loses steps. Also adjusted pulses per mm to match default hw configuration
* Fine tuned Maximum acceleration for MakerParts printer
* Style cleanup
* Style changes to u8g_dev_st7920_128_64_sw_spi.cpp
* Even more improvements to the FastIO HAL for DUE. Now WRITE() is 2 ASM instructions, if value is constant, and 5 cycles if value is not constant. Previously, it was 7..8 cycles
* After some problems and debugging, seems we need to align the interrupt vector table to 256 bytes, otherwise, the program sometimes stops working
* Moved comments out of macro, otherwise, token pasting does not properly work sometimes
* Improved Software SPI implementation on DUE: Now it honors the selected speed passed to spiInit(). This allows much faster SDCARD access, improving SDCARD menus and reducing latency
* Update u8g_dev_st7920_128_64_sw_spi.cpp
* Disabling EEPROM over FLASH emulatiion if an I2C or SPI EEPROM is present
7 years ago
9898b96992
No lcd_map_control flag in quick_stop
7 years ago
c846388a65
Standardize LCD interface code for UBL a little
7 years ago
2fde60da12
Changes for parity with 1.1.x
7 years ago
aeb5c623c1
Show "Level Bed Corners" with UBL too
...
Addressing #8676
7 years ago
4d3c3d0b73
Some ST7920 parity with 1.1.x
...
Possibly more should be brought over? Discussion at #8471
7 years ago
3748c28924
Fix MBL G29 without LCD
...
Addressing https://github.com/MarlinFirmware/Marlin/pull/8575#discussion_r154536617
7 years ago
0154e3480c
New feature: BED_SKEW_CORRECTION
7 years ago
e37dd64548
Apply LEDColor, language fixes
7 years ago
cf0f78336b
New Feature: LED_CONTROL_MENU
7 years ago
276271e72f
Make MBL work more like PROBE_MANUALLY
7 years ago
a67cf78c6b
Clean up whitespace, spacing
7 years ago
f0dd4e3fa0
Bootscreen parity with 1.1.x
7 years ago
f90c075d1f
SD Menu patches
7 years ago
9b64be0bc5
Fixes for leveling sub-menus
7 years ago
fc40d56131
fixed error, updated defaults, added notes
...
Travis fix - only allow ultralcd_st7920_u8glib_rrd_AVR.cpp to compile when ST7920 selected
7 years ago
1ef1052ae1
Phatter arrows for Z offset overlay
7 years ago
5926c9c97b
Followup for MESH_EDIT_GFX_OVERLAY
7 years ago
c6b0c104bb
Adapt G26 to work for all meshes
7 years ago
1685cd193b
Tweak char_mode init
7 years ago
9406c87a97
Fix up LCD init / charset
7 years ago
f011a32771
Board definitions for Ultratronics Pro v1.0
7 years ago
56c02b7f59
Shift register buttons question
...
Can LCD shift registers keep up with faster MCUs?
7 years ago
3994d3b935
General cosmetic LCD
7 years ago
25af9decfe
Remove enum.h include of MarlinConfig.h
7 years ago
81bc428b48
Don't compile custom u8g without DOGLCD
7 years ago
60adc6ff02
Display filwidth ratio in terms of E mm
7 years ago
6e533748eb
Fixes #8472
7 years ago
3bba7d60f3
No retroactive changes with M851 Z
...
If using babystep to adjust the Z probe offset, the axis will move and the mesh will be updated at the same time, causing a doubling of the Z offset over the rest of the print.
To correct for this, the current Z position would need to be modified in the opposite direction, canceling out the additional Z offset added to the mesh. This would be confusing to users, and moreover it would not be accurate without also taking the current Z fade level and current Z height into account.
It might make sense to change the mesh in the case where no babystepping is taking place, but this could be considered an undesirable side-effect of changing the `zprobe_zoffset`.
One way to remedy this would be to return to storing the mesh with `zprobe_zoffset` included, then subtracting `zprobe_zoffset` from the returned Z value. Thus, a babystep moving the Z axis up 1mm would subtract 1 from `zprobe_zoffset` while adding 1 to all mesh Z values.
Without including the `zprobe_zoffset` in the `z_values` there is no safe way to alter the mesh in conjunction with babystepping, although it's fine without it.
7 years ago
7dacc999b9
Remove obsolete show_bootscreen var
7 years ago
b2dda096fe
Fix FILAMENT_LCD_DISPLAY for disabled state
7 years ago
6d6c3b1e97
Fix up REPRAPWORLD_KEYPAD defines
7 years ago
36426af564
Merge pull request #8356 from tcm0116/2.0.x-M600
...
[2.0.x] Normalize load/unload length in M600
7 years ago
e334efb2a7
PROBE_MANUALLY etc.
7 years ago
0efa66be0b
Updates to Traditional Chinese
...
From @cheton at #8347
7 years ago
cba9c1cf9e
Add pre-calculated planner.e_factor
7 years ago
81b91b3f9d
Clean up some trailing white-space
7 years ago
c66696c507
Merge pull request #8344 from tcm0116/2.0.x-delta_height
...
[2.0.x] Add delta_height variable in lieu of using home_offset
7 years ago
f34c3597dc
Add delta_height variable in lieu of using home_offset
7 years ago
d47fbf791b
Arduini IDE compatibility changes
...
changed includes to make Arduino IDE happy
7 years ago
82f45c3e6a
Patch G33 misuse of PROBE_MANUALLY
7 years ago
064e6fe60e
Remove debugging pin toggle from LCD code
7 years ago
0483a7df91
AVR RRD works
...
LPC1768 VIKI2 & RRDFG are working
looks like all SPIs are working
library change
sh1106 locks up
fixed lockup, started I2C SW com
pretty
re-org
restore a few files
make library happy
switched HAL version of rrd
fix travis error
travis error fixes
another travis fix
cleanup
minor update
one more
correct spacing in platformio.ini
7 years ago
b4bf8928aa
German language updates
...
Corresponding to #8306
7 years ago
e9b1944a67
Patch non-extended font option
7 years ago
ca7d36d9ed
RAMPS pins for ANET_KEYPAD_LCD
7 years ago
4df024d7b9
Merge pull request #8234 from thinkyhead/bf2_native_operation
...
[2.0.x] Operate in Native Machine Space
7 years ago
f8393a0908
Operate in Native Machine Space
7 years ago
ca0e4b4e96
Some cleanup around 'lcd_bootscreen()' and 'lcd_kill_screen()'
...
Move 'lcd_bootscreen()' from `lcd_init()` to 'setup()' where it is cexecute exactly once. Saves 'bool show_bootscreen'.
Move the call of 'lcd_custom_bootscreen()' to the begin of 'lcd_bootscreen()'.
Move the delays into the related functions.
Move the picture loop around 'lcd_kill_screen()' into the function.
7 years ago
84b93d941f
Merge pull request #8178 from thinkyhead/bf2_config_tweak
...
[2.0.x] Faster menu navigation for Anet A8
7 years ago
e5ae545647
Remove ADCKey steps acceleration
7 years ago
9cc1d8e312
[2.0.x] Support for SilverGate Board
7 years ago
03e5369411
Faster menu navigation for Anet A8
...
Addressing #8166
7 years ago
a516856df9
Only show custom bootscreen once
7 years ago
2cdde08339
Apply items specified in code review
...
Followup to #8122
7 years ago
b7a66742dd
tested
...
add sort alpha section to other LPC1768 boards
7 years ago
12458cefc4
Remove 5s timer hack. Encoder pos is saved on print start!
7 years ago
9a4cf11835
Remove return_to_status_ms hack, just use defer...
7 years ago
8949c8c0a5
Move SD_REPRINT_LAST_SELECTED_FILE to ultralcd.cpp
7 years ago
b338cafc65
Merge pull request #8111 from thinkyhead/bf2_fwretract_fix_oct26
...
[2.0.x] Improved Firmware Retraction logic
7 years ago
ada90f7335
Clean up trailing spaces
7 years ago
33f379fe88
Add some Polish language
...
Thanks @SCiunczyk
7 years ago
eb02f8c719
Improve FWRETRACT logic, add common sense
7 years ago
229a27a1c7
save FLASH by using reduced font for some languages
7 years ago
3f5f39576b
Reprint option for last SD Memory card file ( #8106 )
...
* Re-Print of same SD Memory Card file with single click
* Re-Print of same SD Memory Card file with single click
* This is the bugfix-v2.0.0 version of https://github.com/MarlinFirmware/Marlin/pull/8104
7 years ago
3356d5a72d
Merge pull request #8072 from thinkyhead/bf2_fix_M600
...
[2.0.x] Fix position sync in M600 pause/resume
7 years ago
272f9f65dc
Fix some typos
7 years ago
6296ab2173
Add GFX overlay to UBL mesh edit ( #8038 )
...
* Add GFX overlay to UBL mesh edit
Fixed misplaced HAS_TEMP_BED in dogm_bitmaps.h
rename _lcd_babystep_zoffset_overlay to _lcd_zoffset_overlay_gfx and move it out of BABYSTEP_ZPROBE_OFFSET to we can use it for over things. Add this function into UBL mesh edit screen.
update all Configuration.h to add ENABLE_MESH_EDIT_GFX_OVERLAY
* Add Sanity to UBL insanity
Need to check for DOGLCD otherwise error out.
7 years ago
72156a2029
change to better (more clear) names ( #8050 )
...
set_destination_to_current() changed to set_destination_from_current()
set_current_to_destination() changed to set_current_from_destination()
7 years ago
783ddf9691
Add SCROLL_LONG_FILENAMES option
7 years ago
ce48403a0b
Add EXTRA_FAN_SPEED feature
...
Based on #7883 by @studiodyne
7 years ago
5c4f3e0107
Add LCD_SET_PROGRESS_MANUALLY
7 years ago
014a83fe09
Merge pull request #7984 from thinkyhead/bf2_micromake_c1
...
[2.0.x] Micromake C1 Configurations, Unaccented French
7 years ago
34a261416f
Add unaccented French language
7 years ago
b206f70693
Split the software endstop capability by axis.
7 years ago
3c8a3a02ba
Fix include path for VIKI
7 years ago
8dd08425fd
Improve LCD leveling edits
7 years ago
3e3911fb81
Use planner.leveling_active for all leveling systems
7 years ago
9a930ebec2
Make leveling_is_active a macro
7 years ago
Giuliano Zaro