microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

Save some PROGMEM with constexpr (#11798)

Browse Source 
When possible, make `active_extruder` a `constexpr` to save some PROGMEM.
2.0.x
Scott Lahteine 6 years ago committed by GitHub
parent 4f883d5971
commit d882717d98
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
9 changed files with 43 additions and 25 deletions
Show Stats Download Patch File Download Diff File

5
Marlin/src/feature/power_loss_recovery.cpp
Unescape Escape View File

@ -32,6 +32,7 @@
#include "../lcd/ultralcd.h"
#include "../gcode/queue.h"
#include "../module/motion.h"
#include "../module/planner.h"
#include "../module/printcounter.h"
#include "../module/temperature.h"
@ -43,8 +44,8 @@ job_recovery_info_t job_recovery_info;
JobRecoveryPhase job_recovery_phase = JOB_RECOVERY_IDLE;
uint8_t job_recovery_commands_count; //=0
char job_recovery_commands[BUFSIZE + APPEND_CMD_COUNT][MAX_CMD_SIZE];
// Extern
extern uint8_t active_extruder, commands_in_queue, cmd_queue_index_r;
extern uint8_t commands_in_queue, cmd_queue_index_r;
#if ENABLED(DEBUG_POWER_LOSS_RECOVERY)
void debug_print_job_recovery(const bool recovery) {

2
Marlin/src/lcd/ultralcd.h
Unescape Escape View File

@ -43,6 +43,7 @@
#if ENABLED(ADVANCED_PAUSE_FEATURE)
#include "../feature/pause.h"
#include "../module/motion.h" // for active_extruder
#endif
bool lcd_hasstatus();
@ -116,7 +117,6 @@
void lcd_completion_feedback(const bool good=true);
#if ENABLED(ADVANCED_PAUSE_FEATURE)
extern uint8_t active_extruder;
void lcd_advanced_pause_show_message(const AdvancedPauseMessage message,
const AdvancedPauseMode mode=ADVANCED_PAUSE_MODE_PAUSE_PRINT,
const uint8_t extruder=active_extruder);

5
Marlin/src/module/motion.cpp
Unescape Escape View File

@ -87,9 +87,10 @@ float current_position[XYZE] = { 0 };
*/
float destination[XYZE] = { 0 };
// The active extruder (tool). Set with T<extruder> command.
uint8_t active_extruder; // = 0;
#if EXTRUDERS > 1
uint8_t active_extruder; // = 0
#endif
// Extruder offsets
#if HAS_HOTEND_OFFSET

7
Marlin/src/module/motion.h
Unescape Escape View File

@ -76,7 +76,12 @@ extern float feedrate_mm_s;
extern int16_t feedrate_percentage;
#define MMS_SCALED(MM_S) ((MM_S)*feedrate_percentage*0.01f)
extern uint8_t active_extruder;
// The active extruder (tool). Set with T<extruder> command.
#if EXTRUDERS > 1
extern uint8_t active_extruder;
#else
constexpr uint8_t active_extruder = 0;
#endif
#if HAS_HOTEND_OFFSET
extern float hotend_offset[XYZ][HOTENDS];

4
Marlin/src/module/planner.cpp
Unescape Escape View File

@ -1759,7 +1759,9 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
block->e_to_p_pressure = baricuda_e_to_p_pressure;
#endif
block->active_extruder = extruder;
#if EXTRUDERS > 1
block->active_extruder = extruder;
#endif
#if ENABLED(AUTO_POWER_CONTROL)
if (block->steps[X_AXIS] || block->steps[Y_AXIS] || block->steps[Z_AXIS])

4
Marlin/src/module/planner.h
Unescape Escape View File

@ -101,7 +101,9 @@ typedef struct {
};
uint32_t step_event_count; // The number of step events required to complete this block
uint8_t active_extruder; // The extruder to move (if E move)
#if EXTRUDERS > 1
uint8_t active_extruder; // The extruder to move (if E move)
#endif
#if ENABLED(MIXING_EXTRUDER)
uint32_t mix_steps[MIXING_STEPPERS]; // Scaled steps[E_AXIS] for the mixing steppers

10
Marlin/src/module/stepper.cpp
Unescape Escape View File

@ -124,7 +124,7 @@ uint8_t Stepper::last_direction_bits = 0,
bool Stepper::abort_current_block;
#if DISABLED(MIXING_EXTRUDER)
#if DISABLED(MIXING_EXTRUDER) && EXTRUDERS > 1
uint8_t Stepper::last_moved_extruder = 0xFF;
#endif
@ -159,8 +159,8 @@ uint32_t Stepper::advance_dividend[XYZE] = { 0 },
int32_t Stepper::delta_error_m[MIXING_STEPPERS];
uint32_t Stepper::advance_dividend_m[MIXING_STEPPERS],
Stepper::advance_divisor_m;
#else
int8_t Stepper::active_extruder; // Active extruder
#elif EXTRUDERS > 1
uint8_t Stepper::active_extruder; // Active extruder
#endif
#if ENABLED(S_CURVE_ACCELERATION)
@ -1702,7 +1702,7 @@ uint32_t Stepper::stepper_block_phase_isr() {
advance_dividend_m[i] = current_block->mix_steps[i] << 1;
}
advance_divisor_m = e_steps << 1;
#else
#elif EXTRUDERS > 1
active_extruder = current_block->active_extruder;
#endif
@ -1729,7 +1729,7 @@ uint32_t Stepper::stepper_block_phase_isr() {
#endif
) {
last_direction_bits = current_block->direction_bits;
#if DISABLED(MIXING_EXTRUDER)
#if DISABLED(MIXING_EXTRUDER) && EXTRUDERS > 1
last_moved_extruder = active_extruder;
#endif
set_directions();

13
Marlin/src/module/stepper.h
Unescape Escape View File

@ -254,8 +254,11 @@ class Stepper {
static bool abort_current_block; // Signals to the stepper that current block should be aborted
#if DISABLED(MIXING_EXTRUDER)
static uint8_t last_moved_extruder; // Last-moved extruder, as set when the last movement was fetched from planner
// Last-moved extruder, as set when the last movement was fetched from planner
#if EXTRUDERS < 2
static constexpr uint8_t last_moved_extruder = 0;
#elif DISABLED(MIXING_EXTRUDER)
static uint8_t last_moved_extruder;
#endif
#if ENABLED(X_DUAL_ENDSTOPS)
@ -293,8 +296,10 @@ class Stepper {
advance_divisor_m;
#define MIXING_STEPPERS_LOOP(VAR) \
for (uint8_t VAR = 0; VAR < MIXING_STEPPERS; VAR++)
#elif EXTRUDERS > 1
static uint8_t active_extruder;
#else
static int8_t active_extruder; // Active extruder
static constexpr uint8_t active_extruder = 0;
#endif
#if ENABLED(S_CURVE_ACCELERATION)
@ -385,7 +390,7 @@ class Stepper {
// The extruder associated to the last movement
FORCE_INLINE static uint8_t movement_extruder() {
return
#if ENABLED(MIXING_EXTRUDER)
#if ENABLED(MIXING_EXTRUDER) || EXTRUDERS < 2
0
#else
last_moved_extruder

18
Marlin/src/module/tool_change.cpp
Unescape Escape View File

@ -158,7 +158,7 @@
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("(4) Move to position near new extruder");
#endif
current_position[X_AXIS] += (active_extruder == 0 ? 10 : -10); // move 10mm away from parked extruder
current_position[X_AXIS] += active_extruder ? -10 : 10; // move 10mm away from parked extruder
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) DEBUG_POS("Move away from parked extruder", current_position);
@ -177,7 +177,7 @@
pe_activate_magnet(tmp_extruder);
// STEP 6
current_position[X_AXIS] = grabpos + (tmp_extruder == 0 ? (+10) : (-10));
current_position[X_AXIS] = grabpos + (tmp_extruder ? -10 : 10);
planner.buffer_line_kinematic(current_position, planner.max_feedrate_mm_s[X_AXIS], active_extruder);
current_position[X_AXIS] = grabpos;
#if ENABLED(DEBUG_LEVELING_FEATURE)
@ -393,9 +393,9 @@ inline void invalid_extruder_error(const uint8_t e) {
#define CUR_Z current_position[Z_AXIS]
#define CUR_E current_position[E_AXIS]
planner.buffer_line( CUR_X, CUR_Y, raised_z, CUR_E, planner.max_feedrate_mm_s[Z_AXIS], active_extruder);
planner.buffer_line( xhome, CUR_Y, raised_z, CUR_E, planner.max_feedrate_mm_s[X_AXIS], active_extruder);
planner.buffer_line( xhome, CUR_Y, CUR_Z, CUR_E, planner.max_feedrate_mm_s[Z_AXIS], active_extruder);
planner.buffer_line(CUR_X, CUR_Y, raised_z, CUR_E, planner.max_feedrate_mm_s[Z_AXIS], active_extruder);
planner.buffer_line(xhome, CUR_Y, raised_z, CUR_E, planner.max_feedrate_mm_s[X_AXIS], active_extruder);
planner.buffer_line(xhome, CUR_Y, CUR_Z, CUR_E, planner.max_feedrate_mm_s[Z_AXIS], active_extruder);
planner.synchronize();
}
@ -607,8 +607,10 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
select_multiplexed_stepper(tmp_extruder);
#endif
// Set the new active extruder
active_extruder = tmp_extruder;
#if EXTRUDERS > 1
// Set the new active extruder
active_extruder = tmp_extruder;
#endif
#endif // HOTENDS <= 1
@ -627,7 +629,7 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
#endif
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(MSG_ACTIVE_EXTRUDER, (int)active_extruder);
SERIAL_ECHOLNPAIR(MSG_ACTIVE_EXTRUDER, int(active_extruder));
#endif // !MIXING_EXTRUDER || MIXING_VIRTUAL_TOOLS <= 1
}

Write Preview
Loading…
Cancel
Save