4885 Commits (394c80c87bf1a5764b02bfbf70e81f8abf6b1c1b)

Author SHA1 Message Date
Daid 7d124478fa Only protect the heater pins for the defined extruders.
Changed the way the extruder pins are defined so it doesn't create extra -1 entries in the list.
13 years ago
Daid 3d83109028 Fixed general 16x2 LCD build without SD support. 13 years ago
Christian Thalhammer cb02914687 Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1 13 years ago
Christian Thalhammer 10bf2bb8e1 - 13 years ago
Daid d47b666630 Merge branch 'Marlin_v1' of git://github.com/ErikZalm/Marlin into Marlin_v1 13 years ago
Daid 88d289caa1 Made plan_buffer_line arguments const, which optimizes better and fixes the RUNOUT_PREVENTION feature. 13 years ago
Erik van der Zalm b4833d55c2 Fixed HOME_POS in combination with G28 X0 or G28 Y0 13 years ago
Erik van der Zalm c6f2ec3c82 remove stop_heating_wait 13 years ago
Erik van der Zalm b48d67ce10 Fixed homing 13 years ago
ErikZalm 071eec7aa7 Merge pull request #81 from phord/09469add5560ca8a676c42e4bcd499868c33f0dd
Clean up and add some trace info
13 years ago
ErikZalm 1ebe7d1ab6 Merge pull request #83 from phord/tempfix
Add explicit #define for bogus temp override
13 years ago
Phil Hord b65ef8d66c Add support for upcoming Gen7 v1.4
V1.4 moves thermistor power to the always-on 5v line.
The BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE is no longer
needed on this board.  Add a new motherboard type to
support this feature.
13 years ago
Phil Hord 740f0c7690 Add explicit #define for bogus temp override
The code to ignore the "bad thermistor reading failsafe"
suicide function depends on the existing of the PS_ON pin
feature.  But in some boards this shouldn't be the case
Fix this by adding an explicit definition to make our
intentions more clear and separable.
13 years ago
Phil Hord ba8500a236 pins.h: Define Z_MAX_PIN for Gen7 board
The Z_MAX_PIN value was defined as no-value, but this causes
the compile to fail.  Fix this by setting the Z_MAX_PIN to the
correct value (which happens to be 0 for pin PB0/DIO0/0).
13 years ago
Phil Hord 09469add55 Add board reset reporting (from Repetier-Firmware) 13 years ago
Phil Hord f3101e96d9 Add suitable .gitignore to avoid build noise 13 years ago
Phil Hord 245dca4bee Makefile: generic pde=>cpp rule
This adds flexibility to the makefile by allowing different pde
targets to be specified for different needs.
13 years ago
Erik van der Zalm 97d42ca2b2 SDSUPPORT default disabled 13 years ago
Changwoo Ryu 7b14953c99 Fix build on Sanguino based boards with ATmega1284P 13 years ago
Daid 286d5003fa Fixed compiler warning for Sanguino compile 13 years ago
ErikZalm 66d50562b6 Merge pull request #76 from iXce/Marlin_v1
Fix Makefile
13 years ago
Erik van der Zalm 27f595a444 Changed version => RC2 13 years ago
Erik van der Zalm 018c567abf Moved SLOWDOWN function. (jetty840)
Included AD595 calibration options. (daid)
13 years ago
Erik van der Zalm 4fbda5c3f5 Merge remote-tracking branch 'daid/Marlin_v1' into Test 13 years ago
Erik van der Zalm ce714fe306 Fixes in pins.h 13 years ago
Erik van der Zalm 35e57bf149 Added gen6 deluxe. 13 years ago
Erik van der Zalm 84ea2d61e8 Moved gen7 boards to motherboard type 10, 11 and 12.
Split ramps1.3 in Sprinter like config and multiextruder config.
13 years ago
Guillaume Seguin adc108d79e Correctly build the produced applet/Marlin.cpp source 13 years ago
Erik van der Zalm 5aa9c41ab1 Changed comment mode for detection.
Added M221 extuder multiply factor.
13 years ago
Erik van der Zalm 00690f7ffd Fix cast warning in Gen7 13 years ago
Erik van der Zalm 01d28c18ab Fixed casting warning in sanguino 13 years ago
Blair Thompson 2fd8c248fe Added Fan control to the pre-heat settings.
I find that the PID routine works better when the cooling fan is switched on
at the beginning of a warm up routine.  Otherwise when you enable the fan
just before a print, you have a delay as the PIDre-adjusts.

This should also be safer as most cooling fans are directed at the hot -ends
thermal barrier!
13 years ago
Blair Thompson d9f2f509d5 Added new menu items under the prepare submenu.
Instead of a single pre-heat, now there is pre-heat ABS and PLA options
Added defines to the configuration file to adjust preheat temperatures for both
13 years ago
Erik van der Zalm ae3e7586c6 Added HOME_POS. This adds the posibility to make the center 0
Updated the Xsteps ... settings via the LCD menu
13 years ago
Erik van der Zalm df1437bd86 Changed display format for some numbers. 13 years ago
Erik van der Zalm 8816ef1c64 Small fixes after merge 13 years ago
Erik van der Zalm d298dd121f merged SBUBA82 and Justblair 13 years ago
Erik van der Zalm 2cc9a89830 Merge remote-tracking branch 'SCUBA82/Marlin_v1' into Marlin_v1 13 years ago
Erik van der Zalm a0a1f81913 various changes 13 years ago
Christian Thalhammer 8a8ea50f33 fixed manual axis movement lcd option 13 years ago
Blair Thompson b976692d0f Removed VS project files for tidyness stakes 13 years ago
Blair Thompson fe940a142d Added a structure that will allow easy translations/modifications to the LCD menu.
Signed-off-by: Blair Thompson <mail@justblair.co.uk>
13 years ago
Christian Thalhammer b3fb09a20c change preheat to ABS values of nozzle 227 and be 105 C
next try for manual axis movement
13 years ago
Blair Thompson a05a261b72 Added a workaround. Ramps SD card does not have sdcarddetect. My temporary solution is to add a momentary swtich
that pulls down the SDCARDDETECT pin and mimicking the pull and reinsert ofa a SD card
13 years ago
Blair Thompson 1b6765ed12 Updated the pin config for RAMPS 1.3 to include ultimaker new style LCD/Rotary Encoder interface 13 years ago
Christian Thalhammer 1ff99ae25f ATMega1284P support for Arduino IDE
replace $ARDUINO_HOME/hardware/tools/avr/etc/arduino.conf with this file
13 years ago
Christian Thalhammer e661578c84 support for GEN7 1.1,1.2 and 1.3 13 years ago
Daid 73344e69c1 Added temperature offset/gain settings for AD595. 13 years ago
Christian Thalhammer d309565b56 Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
Conflicts:
	Marlin/Configuration.h
13 years ago
Christian Thalhammer 0e3631ff4b smaller changes 13 years ago
Erik van der Zalm fa2e1be0ca changed default EXTRUDE_MINTEMP to 170. 13 years ago
Erik van der Zalm 7699f250e3 Fixed small merge bug 13 years ago
Erik van der Zalm 11518a987f merged with triffid fork 13 years ago
Erik van der Zalm 13e185d330 removed unused HEATING_EARLY_FINISH_DEG_OFFSET
Simplified stepper inactive time
13 years ago
Erik van der Zalm b58eae7657 Corrected e-length calculation in planner 13 years ago
daid 2a77c84c8f Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0. 13 years ago
Erik van der Zalm d47a3e5950 Changed check i mtion_conrol
if (millimeters_of_travel == 0.0) => if (millimeters_of_travel < 0.001)
(thanks mooselake)
13 years ago
Erik van der Zalm f87c80889f Fixed M109 timer overflow (reported by triffid) 13 years ago
Erik van der Zalm 154de69c02 Print configuration.h version during startup (thanks hairykiwi) 13 years ago
Erik van der Zalm 6ef8459494 Corrected distance calculation. (thanks jv4779) 13 years ago
Erik van der Zalm 598eb1d4f1 Fixed compilation for gcc-4.6.2 with avr-lib-1.8.0 (thanks daid) 13 years ago
Erik van der Zalm 9173a5713b Teensylu support. 13 years ago
Erik van der Zalm da040fd393 Fixed ultimaker heater 1 pins. (Thanks daid) 13 years ago
Erik van der Zalm bdb70c0509 Warning for 10k thermistor 13 years ago
Erik van der Zalm 5113513cb2 RC 1 13 years ago
Erik van der Zalm d8a0c6450f Split the configuration file in two parts.
One for common settings.
One for advanced settings.
13 years ago
Christian Thalhammer 4cc8e37bf1 lcd menue "move_axis" added 13 years ago
Christian Thalhammer b5fae1104b fixed sUICIDE_PIN disable 13 years ago
Erik van der Zalm f9c5333f97 Made "stop heating wait" optional.
Default off.
13 years ago
Erik van der Zalm 292ddd2edb Fix Z_LATE_ENABLE 13 years ago
Christian Thalhammer 25cd8af536 added arduino ide GEN7 support Files 13 years ago
Christian Thalhammer 14702089ee -disable TEMP Min MAX Kill while using PS_ON Pin
ON GEN7 there is no temperature reading when power is off.. so Marlin
would kill itself. There seems to be an update from "Traumflug" on GEN7
using standby VCC for thermistors.
13 years ago
Christian Thalhammer b51e8bf7e5 -disabled CARDDETECT if PIN is set to -1
- redo disable Beeper if PIN is set to -1
13 years ago
Christian Thalhammer 3183a14755 -added Configuration for GEN7 which worked for me 13 years ago
Christian Thalhammer 5edef148fe -disalbe beeper if BEEPER_PIN = -1 13 years ago
Christian Thalhammer 13e2ad2831 - added info for using GEN7 configuration 13 years ago
Christian Thalhammer 59cc5f889e - added support for ATMega1284P 13 years ago
Christian Thalhammer a11f3b2d2f - Pins for modified GEN7 assigned
- Added support for ATMega1284
13 years ago
Erik van der Zalm abb7e63906 fixed z-disable bug. 13 years ago
Erik van der Zalm 9f139d6e0e Added MAX6675 support. (Thanks to gregfrost)
Needs some work to remove the blocking in read max6675.
13 years ago
Erik van der Zalm e45e5c68bb Added support for Gen3+ (Pins file only)
Added late z enable. (blddk request)
Only calculate look ahead if >2 moves in buffer.
Removed some FORCE_INLINE to save memory.

Signed-off-by: Erik van der Zalm <erik@vdzalm.eu>
13 years ago
Michael Moon 9c918a497b more work on Makefile - actually rebuilds if Makefile or Configuration.h are altered, also much cleaner output 13 years ago
Michael Moon ab01658fd2 local configuration stuff- WATCHPERIOD causes breakage, disable. few other misc changes 13 years ago
Michael Moon 42bedb3f60 PROGMEM elements must be const 13 years ago
Michael Moon a991bde523 enable auto-reset before programming, disable afterwards 13 years ago
Michael Moon 3e575533c5 get M81 working 13 years ago
Michael Moon 2ae2ead97b help residency not overflow 13 years ago
Michael Moon 71dc82e0b4 my local configuration 13 years ago
Michael Moon 5aadc2f5ca cardreader needs to include some other files 13 years ago
Michael Moon 8d0916af13 allow Marlin to actually compile with Makefile pulled from Sprinter and a few other modifications 13 years ago
haxar 6cc6029d7a M109 EOL fix when TEMP_RESIDENCY_TIME is undefined; printer interface (pronterface) could not see target extruder heater temperature to continue print 13 years ago
Bernhard 157aa7f2fd m115 eol fix 13 years ago
Bernhard 7aeb45303d small mistake 13 years ago
Bernhard cee5f9020a added suicide pin for a power supply to the arduino that is only active if the arduino is holding high for an output. 13 years ago
Bernhard 3814bbb529 made sd code only compile with SDSUPPORT defined. safes 10k of codespace 13 years ago
Bernhard 729cde4475 fix autostart failure if in wrong directory 13 years ago
Bernhard 396270a0de fix duplicated definition of MOSI MISO pins in case motherboard==33 13 years ago
Bernhard 11f2dafc4e one step closer to a functional makefile.. 13 years ago
Bernhard 8463e39a4a starting with sanguino arduino 1.0 compatibility 13 years ago
Bernhard 2bc160a978 add wiring.h, that can be used to overwrite:
arduino-0023/hardware/arduino/cores/arduino/wiring.h
this is necessary if the avr libraries are recent, but arduino is old. Alternative: newer arduino
13 years ago
Bernhard 57f9359a41 simplified the includes, makefile now works with arduino23 13 years ago
Bernhard 3c1a4aac2b header file simplification 13 years ago
Bernhard 212515148e added m240 photography support. default off 13 years ago
Bernhard 6735025428 cooldown 13 years ago
Bernhard 415aadf704 lcd panel bed support
advance and ultipanel not any more in default config
13 years ago
Erik van der Zalm 554cc1718d Fiexed E_ENABLE_PIN errors 13 years ago
Erik van der Zalm 617968ab76 G92 fix 13 years ago
Erik van der Zalm 84d9cf7339 merging 13 years ago
Erik van der Zalm e017228569 Merged multiple extruder support.
Soft PWM. (Sanguinololu can also have PID temperature control)
Interrupt save WRITE for addresses > 0x0FF
13 years ago
Bernhard 3320a5b37d make autotemp compatile for use without pid 13 years ago
Bernhard 06411d5c9e ultralcd can now also stop the wait loop for the hot-end m109 heating when stopping sd prints. 13 years ago
Bernhard 82c99625fa instant stop of sd prints from the panel. 13 years ago
Bernhard 01001b89d2 repaired nozzle runout prevention to not collide with automatic stepper disabeling. 13 years ago
Bernhard 88ee053af0 heating up santity, formarly knows as "watchdog", but renamed due to the existance of the real watchdog, works now. 13 years ago
Bernhard b1d84d879b st_synchronize back to normal.. 13 years ago
Bernhard Kubicek f6fe7143e4 Merge pull request #29 from k-eex/Marlin_v1
Fix M201 not saving settings in all places, so the changes did not get written into EEPROM
13 years ago
Bernhard dde4b40fa9 disable steppers in runout prevention 13 years ago
Bernhard 2bc5e7ec9e prevent too long extrudes, or too cold extrudes 13 years ago
Bernhard aa4f9a6474 better values. 13 years ago
Bernhard 87fd249c43 made runout prevention independent of tempeorarily set esteps 13 years ago
Bernhard 1ec0c3b68a extruder runout prevention. 13 years ago
Bernhard 5b4625f79c added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing. 13 years ago
Bernhard cc4a9cdb69 added autostart procedure trigger to the ultralcd menu 13 years ago
Bernhard 61c943b4bf fixed the st_synchronize. it would have continued if there is only the last move of the buffer being stepped. 13 years ago
Keegi bae1e422f6 Fix M201 not saving settings in all places, so the changes did not get written into EEPROM 13 years ago
Bernhard 754d2d69b2 z homing sound fix, for now until the actual cause is found.. 13 years ago
Bernhard 986f0ba76c moved <stdio.h> to more dominant location. 13 years ago
Bernhard 460b788d78 repaired homing position setting. 13 years ago
Denis B 4fd75dc813 Working version of multiple extruders (up to 3)
- The temperature control is pretty much complete
  (not sure what to do w/ autotemp though)
  Changed the pins assignment to clearly separate bed and extruder heaters
  and temp sensors, changed a bit how termistor tables are handled.
- The steppers control is rudimentary
  (only chanages what pins it uses depending on the active_extruder var,
   but that's enough for switching extruder in the start.gcode in the
   the profiles)
- Tested only w/ RAMPS 1.4
13 years ago
Bernhard 12e8edcac3 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 13 years ago
Bernhard cf50ba140f added M503 to display eeprom storage, and renamed eeprom routings. This version is compatible with the qtmarlin eeprom-tab. 13 years ago
Erik van der Zalm 89e832c295 Update endstops only for homing. (use less resources when not used) 13 years ago
Erik van der Zalm b99c49ec3b Add option to only check endstop when homing 13 years ago
Erik van der Zalm 95a0b28acb Merge branch 'Marlin_v1', remote-tracking branch 'origin/Marlin_v1' into Marlin_v1 13 years ago
Erik van der Zalm af22e9cd38 Some advance modifications 13 years ago
Bernhard 7714b98da7 solved some compiler warnings that are now visible in arduino 1.0.
Found a couple of unused variables, that I commented.
Tried to solve the program memory warning message, and failed.
13 years ago
Bernhard dfd240b260 overworked autotemp, removed one layer of nesting from the ultralcd. 13 years ago
Bernhard 4f909963e4 make QUICKHOME configureable 13 years ago
Erik van der Zalm 6b86f15686 More 2nd extruder implementation. (Not usable)
Advance (not tested)
13 years ago
Bernhard 0bc9daa4f7 make it compile with arduino 1.0 ; function is still untested. 13 years ago
Bernhard b0c3871750 more fixing of the sanguino math round problem 13 years ago
Bernhard 9c57453168 removed stream.h referenece from marlinserial. 13 years ago
Bernhard 59205ac5fc preliminiary implementation for the early heating finish.
Might be replaced by something more clever, e.g. by erik, and does not yet support the second extruder or the bed.
its kind of not so cool, because you need 6 more ints.
Maybe isheating() should use the degrees directly, as it is not used in time-critical anyways.
Then it would be much easier. to have the offsets without additional variables.
13 years ago
Bernhard 7a4be21b4f made it compile if arduino decides to include files in a differnt order. DEC HEX and stuff now defined in MarlinSerial.h 13 years ago
Bernhard 716e89b87c first homing move diagonal towards home switches. 13 years ago
Bernhard d00b7e5587 repaired compiliation in windows 13 years ago
Bernhard e4ab0e5982 more inlines 13 years ago
Bernhard 8cb29921a0 possible stepper release after sd printing 13 years ago
Bernhard 044886b4a0 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 13 years ago
Bernhard b19c8b74b9 force inline 13 years ago
Erik van der Zalm 6d95644c0d Moved M88 into M84. (M84 E) 13 years ago
Bernhard 311627141b Merge branch 'smallopt' into Marlin_v1
Conflicts:
	Marlin/temperature.h
13 years ago
Erik van der Zalm 7216a12856 Disabled M88 for boards that don't have seperate enable pins. 13 years ago
Erik van der Zalm 98805c9228 Added M88 command. (Request from Action68) 13 years ago
Bernhard 85da81e673 inlineing of small functions in serial 13 years ago
Bernhard b9ad0bb2ce removed unecessary indirect register adressing in serial. 13 years ago
Bernhard dd5ca68c87 get rid of indirect ringbuffer calls, made some inlines, removed virtual and streaming class requirements. 13 years ago
Erik van der Zalm dd5296ad4d Fixed temperature reading bug.
(When using the lower and upper adc input bank)
13 years ago
Erik van der Zalm f75f426dfa Removed interrupt nesting in the stepper ISR.
Add serial checkRx in stepper ISR.
Copied HardwareSerial to MarlinSerial (Needed for checkRx).
13 years ago
Bernhard 2d9a715655 first naive attempt to have a offset in the homeing procedure. Does not enable to move into regions not allowed by endstops. 13 years ago
Bernhard d2f034ba84 lcd message from gcode, m117 13 years ago
Bernhard 6aecf80278 add autotemp support to the lcd 13 years ago
Bernhard b128d25f27 overlooked some inlines.. 13 years ago
Bernhard 26a1de1e44 force inline 13 years ago
Bernhard f8e170a44b planner optimization by inline functions 13 years ago
Erik van der Zalm aad4b75b94 First parts 2nd extruder 13 years ago
Bernhard a0dc66f7bf Home retract distance configureable per axis. 13 years ago
Bernhard 6d6f323535 make an option if sd-card stop should release the steppers. 13 years ago
Bernhard 4d6a5c29df disable steppers as routine in stepper.cpp 13 years ago
Bernhard 74d0032e25 cooldown blocking selectable by #define. 13 years ago
Bernhard 191f36b493 slowdown 13 years ago
Bernhard c54a807824 overworked ultralcd a bit 13 years ago
Bernhard a6823a84e1 another typo 13 years ago
Bernhard 57e163e989 typo 13 years ago
Bernhard b58787a367 now velocities are also set in mm/sec in gcode. 13 years ago
Bernhard 71ca78982b Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 13 years ago
Bernhard 235051253a overworked lcd+eeprom to have only mm/sec and PID including pid_dt 13 years ago
Erik van der Zalm 27654bfe69 Fixed variable (removed 0x) 13 years ago
Erik van der Zalm cdf0bd4e63 Fixed config bug when EEPROM was disabled 13 years ago
Erik van der Zalm 6ac9b2e761 Fixed residency time bug. (Thanks to Sound :-) ) 13 years ago
Erik van der Zalm ac8adabb2b Small nominal speed improvement. 13 years ago
Erik van der Zalm 0e0e4945d8 Removed ISR overtaken message from ISR routine 13 years ago
Erik van der Zalm c0f8c9fd72 Seperate ENDSTOP_INVERTING for X Y and Z
Added simple endstop filter.
Corrected M114 count display.
13 years ago
Bernhard Kubicek 5535e51bf6 Yes, thats the beta. 13 years ago
Bernhard Kubicek 8b14a8ad34 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 13 years ago
Bernhard Kubicek 924bab1a03 less lcd flickering 13 years ago
Bernhard Kubicek 379ea642e1 make tuneing sub-menu. 13 years ago
Erik van der Zalm 959d82e81e Small temperature disable bug. 13 years ago
Erik van der Zalm 15bb3f284e Merge branch 'Marlin_v1', remote-tracking branch 'origin/Marlin_v1' into Marlin_v1 13 years ago
Erik van der Zalm 4e5becfc51 Added endstop reporting 13 years ago
Bernhard Kubicek eeb4f029db Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 13 years ago
Bernhard Kubicek b21d5193f2 made ultralcd compatible with folders. 13 years ago
Erik van der Zalm 2e43f9c809 Changed min max temperature code. 13 years ago
Bernhard Kubicek cd2268f10a code cleanup in ultralcd. 13 years ago
Erik van der Zalm 0e7fee9a9b Merge branch 'Marlin_v1', remote-tracking branch 'origin/Marlin_v1' into Marlin_v1 13 years ago
Erik van der Zalm 915ef2d4a1 Added software endstops 13 years ago
Bernhard Kubicek e87df99e22 update mcode documentation 13 years ago
Bernhard Kubicek 8a1e719a3f overworked config file 13 years ago
Bernhard Kubicek 5ad1d19384 make it compile without sd_support 13 years ago
Bernhard Kubicek 7a2d1f5aeb add M17, so the enable stepper button works in repg. 13 years ago
Erik van der Zalm e02af3e66a Merge remote-tracking branch 'origin/Marlin_v1' into Marlin_v1 13 years ago
Erik van der Zalm 537b5c155d Fixed arc flowrate. 13 years ago
Bernhard Kubicek 953d830bba Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 13 years ago
Bernhard Kubicek 2a6afee832 make it compile without autotemp 13 years ago
Bernhard Kubicek f52e1a9571 autotemp working, default=disabled. 13 years ago
Erik van der Zalm 6e6fdb9a4e Merge remote-tracking branch 'origin/Marlin_v1' into Marlin_v1 13 years ago
Erik van der Zalm 6841a10446 Fixed max/min temperature bug 13 years ago
Bernhard Kubicek 8a08b8e07e trying to get autotemp to work. 13 years ago
Bernhard Kubicek f0154de5b3 found bug that disabled printing from root. 13 years ago
Bernhard Kubicek 70650c331d corrected the ultimaker default values, the previous had a calculation error: see: http://groups.google.com/group/ultimaker/browse_thread/thread/91906788639703cf 13 years ago
Bernhard Kubicek 9d90220537 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 13 years ago
Bernhard Kubicek 869cee74e6 host-based sd card printing seems now to work with folders 13 years ago
Bernhard Kubicek 70abca195a overworked cardreader for folder support; not finished yet. 13 years ago
Erik van der Zalm ff69e0a772 Changed max/min temp init. Removed second uart from sabguino core 13 years ago
Bernhard Kubicek 1e5e141ac9 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 13 years ago
Bernhard Kubicek edb5ea7efa the normal config again.. 13 years ago
Bernhard Kubicek 5df5727e93 removed some debugging comments 13 years ago
Bernhard Kubicek 64f2121ab1 updated to sdfatlib2010902 13 years ago
Erik van der Zalm b15902d3b5 Fixed bug in configuration.h 13 years ago
Erik van der Zalm e63e224a33 Merge remote-tracking branch 'origin/Marlin_v1' into Marlin_v1
Conflicts:
	Marlin/Configuration.h
	Marlin/Marlin.pde
13 years ago
Erik van der Zalm e7dca8614b Advance experiments. Not working yet. 13 years ago
Bernhard Kubicek 46f80e82d9 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
Conflicts:
	Marlin/ultralcd.h
13 years ago
Bernhard Kubicek a9c7da06e3 and changed ultipanel to have the mm/sec and not mm/min
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1

Conflicts:
	Marlin/Marlin.pde
	Marlin/ultralcd.h
13 years ago
Bernhard Kubicek 02b9eceead show sd% 13 years ago
Bernhard Kubicek 7919a40d06 watchdog,percent done, 13 years ago
Erik van der Zalm 805d37f77b Fixed some small planner bugs 13 years ago
Erik van der Zalm 5fd41ae872 Some fixes in planner 13 years ago
Erik van der Zalm 95126c09c0 Added slowdown 13 years ago
Erik van der Zalm 331e82dcd3 Buffer size > 16 13 years ago
Erik van der Zalm 2643ae93d6 Added modified Sanguino files 13 years ago
Erik van der Zalm c00eefb824 Merge remote-tracking branch 'origin/Marlin_v1' into Marlin_v1 13 years ago
Erik van der Zalm 1d0452f10c 250000 baud 13 years ago
Bernhard Kubicek c57906b627 fixed bug with adjusting ki in realtime. 13 years ago
Erik van der Zalm ac82411c73 Merge remote-tracking branch 'origin/Marlin_v1' into Marlin_v1 13 years ago
Erik van der Zalm 65934eee9c A lot of changes in the planner code 13 years ago
Bernhard Kubicek 9980ceb4a3 added a m400, that finished all moves,
and the mechanism so that if an endstop is hit it the ISR, the steps_to_be_taken are stored, and some current_block data that will be deleted in the next move
If the normal loop() then finds such an event, the position is calculated (floats would have taken too long in the ISR) A serial message is generated.
13 years ago
Bernhard Kubicek ff592b056a heater power repair. 13 years ago
Bernhard Kubicek e9adfa27b5 re-enabled heaterpower as storage for the current storage of the heater PWM duty cycle.
the M301 now returns the current PID settings of the machine.
M105 returns heating pwm duty cylce as "@:"
13 years ago
Bernhard Kubicek 36958ee305 minor changes and first not-well working version of autotemp 13 years ago
Bernhard Kubicek ba8a53a40f Streaming.h is gone. It conflicted with PROGMEM. And saving memory is more important than nicer code, imho 13 years ago
Bernhard Kubicek 27361e7cd0 beautified the config. ordered it into thematic sections. 13 years ago
Bernhard Kubicek ab154d5592 project progmem finished: total change with ultipanel: 2456 byte free ram initial. now: 4374 ram. 13 years ago
Bernhard Kubicek 7b70caab7c made progmem mainly, found one bug in cardreader, added a empty class for cardreader in case no sd support. 13 years ago
Bernhard Kubicek 72ace55e6a better visibility of public/private/imported variables 13 years ago
Bernhard Kubicek 977fd2b2c7 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 13 years ago
Bernhard Kubicek 907daa49af made loop counters uint8_t most were int(16_t) before 13 years ago
Erik van der Zalm e3af73ee0c Thermistor name problem 13 years ago
Bernhard Kubicek 0b43761c3a preprocessor magic to have a single source principle 13 years ago
Bernhard Kubicek 156763d027 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 13 years ago
Bernhard Kubicek fc0064e525 made cardreader more selfsustained 13 years ago
Erik van der Zalm d3bfffcb6e Corrected thermistor naming 13 years ago
Bernhard Kubicek 01df04e02c first compile with the cardreader class 13 years ago
Bernhard Kubicek 163efdf1c7 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 13 years ago
Bernhard Kubicek 87aaf0f70a static'ified Marlin.pde. 13 years ago
Erik van der Zalm 5cf349a24a Fixed some arc bugs 13 years ago
Bernhard Kubicek 79d1bfb5c0 made many possible variables static, so they cannot be used extern. 13 years ago
Erik van der Zalm 76b3f805c0 Added teensylu pins 13 years ago
Bernhard Kubicek 1d171e9e52 reformating and some minor bugs/things found on the way. 13 years ago
Bernhard Kubicek 900e0c9bf2 overworked the serial responses. Quite difficult, since many texts are Pronterface protocol. 13 years ago
Bernhard Kubicek 1740a83e11 correcting commit errors. 13 years ago
Bernhard Kubicek 7cc358b56b wrong file location 13 years ago
Bernhard Kubicek e8092898b1 watchdog into dedicated file 13 years ago
Bernhard Kubicek 2afb7bd4cf refactured temperature.cpp so that there are now abstract functions to access temperatures. 13 years ago
Erik van der Zalm 0b82465168 First arcs version. (Arcs not working ok) 13 years ago
Erik van der Zalm 2e8e8878e5 Corrected temp variables. 13 years ago
Erik van der Zalm 04d3b5537f Merge remote-tracking branch 'origin/Marlin_v1' into Marlin_v1
Conflicts:
	Marlin/Configuration.h
	Marlin/EEPROMwrite.h
	Marlin/Marlin.h
	Marlin/Marlin.pde
	Marlin/temperature.cpp
	Marlin/temperature.h
	Marlin/thermistortables.h
13 years ago
Erik van der Zalm d15f01e1b4 Temperature changes 13 years ago
Bernhard Kubicek ea86a5e10f moved the variables in the ISR, thats the most normal use case of static. 13 years ago
Bernhard Kubicek b9ea0651ec Revert "this is not working. Do you maybe know why?"
This reverts commit 8bcdb9f5f0.
13 years ago
Bernhard Kubicek 8bcdb9f5f0 this is not working. Do you maybe know why? 13 years ago
Bernhard Kubicek 40e8081623 changed end of line to windows, which seems to be the majority of developers main platform. 13 years ago
Bernhard Kubicek 00674af3a8 merge from the branch bkubicek/Marlin/zalmmerge 13 years ago
Erik van der Zalm d7c4f0780b Added M42, M80 and M81 13 years ago
Erik van der Zalm 95d3d9847c M109 now equal to sprinter 13 years ago
Erik van der Zalm bf879ceaa9 Added thermistor tables 13 years ago
Erik van der Zalm 094afe7c10 Merged Marlin, Marlin non gen6 and Ultimaker changes 13 years ago
Erik van der Zalm 0b1423c303 Fixed crashes. 13 years ago
Erik van der Zalm 27664c6da6 Software endstps added 13 years ago
Erik van der Zalm 8e017b81ab Sync with non-gen6 version 13 years ago
Erik van der Zalm b5f6482dce Fixed small feedrate bug.
Copied Camiels comments in the Configuration.h file
13 years ago
Erik van der Zalm 0024a26ccf Fixed lookup table bug. 13 years ago
Erik van der Zalm 5a1787b2f4 Fix M109 13 years ago
Erik van der Zalm 26bf57e22c first-commit 13 years ago
Erik van der Zalm f850af5c1c Signed-off-by: Erik van der Zalm <erik@vdzalm.eu> 13 years ago
Erik van der Zalm 750f6c33e3 first commit 13 years ago