993 Commits (f6a799c7b382f43e819fa4bd7ffd618bca09236e)

Author SHA1 Message Date
Yunhui Fu c96412a78f [2.0.x] UTF-8 language translation support (#10213) 7 years ago
Scott Lahteine 8b8ad14178 Add Z_PROBE_LOW_POINT to prevent damage 7 years ago
Scott Lahteine dca69efc11 Update Bed PID comments 7 years ago
etagle a29adde5c0 Implement BEZIER_JERK_CONTROL
Enable 6th-order jerk-controlled motion planning in real-time.
Only for 32bit MCUs. (AVR simply does not have enough processing power for this!)
7 years ago
Lenbok 0e8242180d Chamber temperature monitoring and auto fan control.
This is an initial cut for feedback, updated for 2.0.x.

Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?

Chamber temperatures are not reported on the LCD in any way.

When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.

As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
7 years ago
Scott Lahteine adcb87f0db Z Endstop Servo => Z Probe Servo 7 years ago
Scott Lahteine dd2949922b Consolidate 3-point leveling point options 7 years ago
Scott Lahteine c6ff39cc14 Spacing cleanup 7 years ago
Scott Lahteine 14c03cb6f4
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10069)
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
7 years ago
Scott Lahteine 28f1276286
[2.0.x] Add Z_AFTER_PROBING option (#10058)
Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
7 years ago
Scott Lahteine 419d12ca1b Add UNKNOWN_Z_NO_RAISE option
With this option enabled, Z won't ever be raised until after `G28` has been completed, and it won't raise if Z becomes unknown. This is good for machines whose beds fall when Z is powered off.
7 years ago
Scott Lahteine a2a672449a Updated boot screen description 7 years ago
Scott Lahteine 4953fb1c88 Standardize encoder defaults 7 years ago
Scott Lahteine 5684beae90 Bring some configs up to speed 7 years ago
Scott Lahteine 2024775e07
Spanish (UTF8) Language (#9786)
From #7314 by @MrAmericanMike
7 years ago
Scott Lahteine b2cf253a13 Add RESTORE_LEVELING_AFTER_G28 option 7 years ago
Marcio Teixeira 13176dfe2f Merge remote-tracking branch 'origin/pr-lite-st7920-status' into pr-lite-st7920-status 7 years ago
Marcio Teixeira 716a22498f Changed temp type from uint8_t to int16_t
- Also deleted old implementation files which had been renamed.
7 years ago
Scott Lahteine 7d8c6b3f3c
Add 20x4 option for Sainsmart LCD (#9740) 7 years ago
Marcio Teixeira aada1e698f Removed unused configuration options. 7 years ago
Marcio Teixeira c7513eb032 Merge branch 'pr-lite-st7920-status' of github.com:marcio-ao/Marlin into pr-lite-st7920-status 7 years ago
Studiodyne d3ca82d8c2 Support for multiple filament runout sensors 7 years ago
Scott Lahteine ca55f2927a
Pulldown pin mode support (#9701)
Implemented for LPC1768.
7 years ago
Scott Lahteine 79272f98fc Proposed changes to ST7920 lightweight status screen 7 years ago
Marcio Teixeira 24eb275b99 Added a light-weight status screen for the ST7920
- The status screen uses the ST7920 character generator to greatly
  reduce SPI traffic and MCU load when updating the status screen.

- Has been tested with the RepRapDiscount Full Graphics Smart Controller
  but should work with any LCD that uses an ST7920 or fully compatible
  controller.
7 years ago
Scott Lahteine 08d685c97a Followup to 21e60fd 7 years ago
Roxy-3D 21e60fd3ed
Allow user to control Z-Height correction for off mesh movements (#9661) 7 years ago
Marcio Teixeira 4880ac6533 Added a light-weight status screen for the ST7920
- The status screen uses the ST7920 character generator to greatly
  reduce SPI traffic and MCU load when updating the status screen.

- Has been tested with the RepRapDiscount Full Graphics Smart Controller
  but should work with any LCD that uses an ST7920 or fully compatible
  controller.
7 years ago
Scott Lahteine 2ec65051fd Fix serial comment sp. 7 years ago
Scott Lahteine 2014d38e10 NEOPIXEL_BRIGHTNESS parity 7 years ago
Scott Lahteine b5e92f4f90
[2.0.x] Enable / disable PSU automatically (#9503) 7 years ago
Scott Lahteine 16739264d3 Add UltiController v2.1 support
Add compatibility with the original screen bord from Ultimaker 2 printer (UltiController v2.1 with the PG-2864ALBP I2C display)
7 years ago
Scott Lahteine 4925f60cff Add MALYAN_LCD to configs 7 years ago
Scott Lahteine 7d6c009104 Add thermistor 15 tuned for JGAurora A5 7 years ago
Scott Lahteine 348b454401 Probe bounds based on bed size 7 years ago
Scott Lahteine 58ed9901d7 Consistent NEOPIXEL_TYPE options 7 years ago
Scott Lahteine fa432508b0 Followup to Ender config 7 years ago
Scott Lahteine 048486390e Bring some configs up to date 7 years ago
Thomas Moore f7efac57b7 Multi-host support 7 years ago
GMagician 5295b4713d [2.0.x] add semitec 104NT-4 (#9119)
Table is very very similar to old 104-GT2 so I added only the name and recycled old ID
7 years ago
Scott Lahteine 0b4a46fa6c Bring configs up to date with 1.1.x 7 years ago
Thomas Moore f0a8a1a853 [2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8866)
* Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
7 years ago
Scott Lahteine 28fc8741d6 Reduce default jerk. XY by half. Z by 1/4 7 years ago
Even ea1a8d1223 add original RADDS LCD + Controller
adds setup for the original Radds Display+Controller+SD Card Reader PCB
http://doku.radds.org/dokumentation/lcd-display/
7 years ago
Dan Delaney b055d8c39c [2.0.x] Adding support for using the MKS_12864OLED with the SSD1306 controller (#8814)
* Adding support for using the MKS_12864OLED with the SSD1306 controller

* Update comment for correct controller type
7 years ago
Scott Lahteine 15d05748df Adding support for the Tronxy and Zonestar LCD 7 years ago
Scott Lahteine 69d49a2438 Shorter segments may be better 7 years ago
Scott Lahteine ae663a4198 PROBE_DOUBLE_TOUCH => MULTIPLE_PROBING 7 years ago
Richard Wackerbarth c1184552ac Change K1 to required option PID_K1 7 years ago
Scott Lahteine aa7efb96bf Bring configurations up to date 7 years ago
Scott Lahteine 0154e3480c New feature: BED_SKEW_CORRECTION 7 years ago
Scott Lahteine ef2531558c Add an option to segment leveled moves 7 years ago
Scott Lahteine 5926c9c97b Followup for MESH_EDIT_GFX_OVERLAY 7 years ago
Scott Lahteine 5ce7f23afa Config option G26_MESH_VALIDATION for all meshes 7 years ago
Scott Lahteine 3f0a982b8c Move Filament Width Sensor to Configuration_adv.h 7 years ago
Scott Lahteine b76e173205 Move test extrusion options under G26 7 years ago
Scott Lahteine 81b91b3f9d Clean up some trailing white-space 7 years ago
Roxy-3D 967104e1ce
Default Extrusion Settings were off a few lines in some of the example config files. (#8333) 7 years ago
Roxy-3D ed62c621d7
Fix G26 Circle Drawing. Add Default Extrusion Settings (#8313)
- Fix G26 Circle Drawing.
- Add default extrusion settings so machine can print lines on print bed
- Yet to be done: Get LCD Menu's to use these settings.
7 years ago
Scott Lahteine 2c099fd4c2 Update Thermal Protection Documentation 7 years ago
Scott Lahteine d83a9a53e8
Merge pull request #8220 from thinkyhead/bf2_serial_port_-1
[2.0] Add SERIAL_PORT -1 option for configurators
7 years ago
Scott Lahteine 93ba72ea83 Add SERIAL_PORT -1, set on SBASE, STM32F103RET6 7 years ago
Scott Lahteine 7e43dd1d23 Fix probes configuration url
Based on #8241 by @machaj
7 years ago
android444 9cc1d8e312 [2.0.x] Support for SilverGate Board 7 years ago
Scott Lahteine 34be5d33c0 The plural of 'axis' is 'axes' 7 years ago
Scott Lahteine 7fad26549b Concise SD_REPRINT_LAST_SELECTED_FILE description 7 years ago
Scott Lahteine 46e9eae159 Tweak to M100 config comment 7 years ago
Scott Lahteine 7f55d82fd1 Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h 7 years ago
Scott Lahteine 580b6e9089 Apply physical limits to mesh bounds 7 years ago
Scott Lahteine 5f87324536 Fix some config verbiage 7 years ago
cdedwards 6296ab2173 Add GFX overlay to UBL mesh edit (#8038)
* Add GFX overlay to UBL mesh edit

Fixed misplaced HAS_TEMP_BED in dogm_bitmaps.h

rename _lcd_babystep_zoffset_overlay to _lcd_zoffset_overlay_gfx and move it out of BABYSTEP_ZPROBE_OFFSET to we can use it for over things. Add this function into UBL mesh edit screen.

update all Configuration.h to add ENABLE_MESH_EDIT_GFX_OVERLAY

* Add Sanity to UBL  insanity

Need to check for DOGLCD  otherwise error out.
7 years ago
Roxy-3D 572cf0ec95 UBL able to generate mesh and save and load it on 32-bit platforms (#8015)
* Get UBL Mesh Generation, Mesh Save & Mesh Load working with 32-Bit platforms

* clean up read_data() and write_data() for non-LPC1768 HAL's

* Get read_data() and write_data() return codes consistent

All HAL's read_data() and write_data() return false if they succeed.

* Get read_data() and write_data() return codes to be consistent

Make read_data() and write_data() return true if an error happens.

* Say UBL is now checked out on machine types in default Configuration.h file.
7 years ago
Jeffrey Li eeb4611606 Add proper support for the AZSMZ 12864 LCD on a SMART RAMPS 7 years ago
Scott Lahteine 014a83fe09 Merge pull request #7984 from thinkyhead/bf2_micromake_c1
[2.0.x] Micromake C1 Configurations, Unaccented French
7 years ago
Scott Lahteine 34a261416f Add unaccented French language 7 years ago
Jeff Eberl b206f70693 Split the software endstop capability by axis. 7 years ago
Slawomir Ciunczyk a11e6a1022 Different NEOPIXEL types
Same as #7728 but for 2.0.x,
Lot of cleanup and remove references in whole code to other "LED files" than leds.h. Now will be much easier to add next drivers/libraries. e.g. FastLED. But bad news, currently FastLED is suporting only RGB devices (no RGBW)
7 years ago
Scott Lahteine e9bcb9d048 Add 4 new LCD displays 7 years ago
Scott Lahteine 9fe7f53216 Misc general spacing cleanup 7 years ago
Scott Lahteine 508d764d63 Add serial XON/XOFF handshaking
From @ejtagle, originally #7459
7 years ago
Scott Lahteine 90af1fe5ee Implement NO_MOTION_BEFORE_HOMING option 7 years ago
Christopher Pepper bea3ec2724 M355 S0, S1 fixes & faster LCD, SD card
fix Travis error
7 years ago
Scott Lahteine 7cd5eb6d42 Update LEVEL_BED_CORNERS config option 7 years ago
Scott Lahteine 4c5be9bb05 Fix a PARKING_EXTRUDER comment 7 years ago
Scott Lahteine 494b0eba2d Config spacing fix 7 years ago
Scott Lahteine f37ed314e0 Friendly layout for Arduino IDE 7 years ago
Scott Lahteine f536c4dccb Move configs 7 years ago
Scott Lahteine e4fcf460e7 Marlin bugfix-2.0.x Version/README 7 years ago
Michal Holes 54d48130f3 Slovak UTF-8 translation
Slovak UTF-8 translation
7 years ago
Vben 4817b39d98 Added new feature for AutoParking Extruder (APE) 7 years ago
Scott Lahteine 385f1bb9e5 Merge pull request #7504 from thinkyhead/bf1_servo_delays
Individual servo delays
7 years ago
Scott Lahteine a1878cd1c0 Add "Level Corners" menu option 7 years ago
GMagician e9c72978c7 Implement SERVO_DELAY as array
This modify give SERVO_DELAY x servo basis
7 years ago
Jozsef Kiraly 97c21e9007 Support for Geeetech GT2560 Rev.A/Rev.A+ 7 years ago
Scott Lahteine 804818b4d9 Bring configs up to date 7 years ago
teemuatlut 936d00dda8 Implement probing delay for piezo sensors 7 years ago
Scott Lahteine 51864fd365 Add bed size as a configuration option 7 years ago
C. Scott Ananian 890e7a16a9 Add support for Printrbot Neopixel RGBW strip.
Connected as described at http://printrbot.com/shop/led-strip/

Based on patch by Kelly Anderson <kelly@xilka.com> at
http://www.xilka.com/printrbot/marlin/1.1.4/20170707/
7 years ago
Scott Lahteine fc9ce65095 Add `BUSY_WHILE_HEATING` for hosts that need it 7 years ago
Petr Zahradník 8c34233452 UTF-8 mapper for Czech 7 years ago
Scott Lahteine 69297b2d7b Make all EEPROM optimization options available 7 years ago
Scott Lahteine 232a10410d LCD_FOR_MELZI 7 years ago
Scott Lahteine dcec7178d1 Expose DISABLE_M503 option as a test option 7 years ago
Scott Lahteine 5b03f23fa2 Bring configurations up to date, fix some comments 7 years ago
Scott Lahteine 5b11b33854 Add support for Průša MK2 Multiplexer 7 years ago
Scott Lahteine afbc6e3e2f Update DELTA/SCARA config comments 8 years ago
Bob-the-Kuhn 325f09ea6c Add link to custom LiquidCrystal library by F. Malpartida 8 years ago
Scott Lahteine 907cafcbfd Support for two switching extruders 8 years ago
dot-bob 0bc66bf22c PCA9632 PWM color LED support
Add support for the PCA9632 PWM color LED driver used on the Ultimaker 2 and Wanhao Duplicator 6.
8 years ago
Bob-the-Kuhn 1c107b3949 delete problem line 8 years ago
Scott Lahteine e556ab1dff Find three-point leveling points on Delta 8 years ago
Scott Lahteine 1919cb0d1e Config cleanups 8 years ago
Roxy-3D 364f8fb613 Update Configuration.h files to better names (#6814)
Changed UBL_G26_MESH_EDITING to UBL_G26_MESH_VALIDATION
Added UBL_MESH_EDIT_MOVES_Z to prepare for that change (coming next)
8 years ago
Scott Lahteine 99c4900a98 SPINDLE/LASER config changes 8 years ago
fixoid c2321b1cdd Separate SWITCHING_NOZZLE and SWITCHING_EXTRUDER 8 years ago
Scott Lahteine 1c4ed8b106 Note 5 extruders in config comments 8 years ago
Brian faa270071d Improve BLTOUCH_HEATERS_OFF functionality
- rename to PROBING_HEATERS_OFF
 - move heater pausing functionality into thermalManager
   - add variables, pause(), ispaused(), other functions
 - add fan pausing functionality -> PROBING_FANS_OFF
 - add probing_pause() wrapper
 - move pausing into do_homing_move() and do_probe_move() to minimize quiet time and so other probe types can benefit
 - example configs
8 years ago
Scott Lahteine 77769e284f Edit configuration comments 8 years ago
Scott Lahteine da08e11acd Add EXTRAPOLATE_BEYOND_GRID option to bilinear leveling 8 years ago
Scott Lahteine 54751e8557 Put DISTINCT_E_FACTORS adjacent to the affected settings 8 years ago
Scott Lahteine 0dbe4b3e54 Edit configurations to reduce verbosity, arrange logically 8 years ago
Scott Lahteine d7d4378481 Remove inaccurate version description 8 years ago
Scott Lahteine 7db805930a Cleanup configurations 8 years ago
Roxy-3D 4075b95519 Allow BL-Touch users to control heaters during probe event (#6485)
The Configuration.h file entries for BL-Touch have been updated to:
```cpp
//#define BLTOUCH
//#define BLTOUCH_DELAY 375      // (ms) Enable and increase if needed
//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are
turned off during probe event
```
8 years ago
Scott Lahteine 959566cf0a Update note about M163 / M164 8 years ago
Scott Lahteine 0e97b3d6d0 Fix some configuration spacing 8 years ago
Scott Lahteine 1bd25fd2b3 Clean up config spacing, section headings, etc. 8 years ago
Scott Lahteine fd2a0784ba Add support for SOLENOID_PROBE 8 years ago
Scott Lahteine dac21ec680 Add support for an RGBW LED 8 years ago
Scott Lahteine e7746ffee4 Extend RGB LED support, adding Printer Events 8 years ago
Scott Lahteine 9343f6a95f Put TOSHIBA with other stepper driver options 8 years ago
Scott Lahteine 1855534f20 Config files cleanup 8 years ago
Scott Lahteine c26a315d0b Additional missed patches 8 years ago
Scott Lahteine c54f6cf23d Updates to support 5 extruders 8 years ago
Scott Lahteine 824f3c1c0d Fix up configuration comments 8 years ago
Scott Lahteine 995ed90248 Clean up Filament Width Sensor comments 8 years ago
Scott Lahteine 2a84122edd Configuration changes to support 5 extruders 8 years ago
Bob-the-Kuhn 3b8926bd09 improved wording, consolidation of info, BLTouch warning
==============================================

clarified BLTouch calculation & changed comment delimitters/flags

I found it hard to pickout the various sections in this area so I
changed most comments from // style to /** ... */

Made the BLTouch calculation simpler and clarified the units of measure
for the result.

============================================

add changes to example configurations

============================================

add TinyBoy2 to this PR & add BLTouch Delay
8 years ago
Scott Lahteine d13991ae18 Use same config name for all mesh dimensions 8 years ago
Scott Lahteine c56eec29f0 Configurable delay for BLTouch servo emulation 8 years ago
Scott Lahteine 9e22184936 Add a "manual" option for ABL 8 years ago
Scott Lahteine 81136c1e82 Merge pull request #6177 from thinkyhead/rc_tinyboy
Support for TinyBoy 2 3D printer (and its OLED display)
8 years ago
Stefan Brüns 0fe57ad4f5 Add Support TinyBoy2 OLED/Encoder panel
The OLED is driven by an SSD1306, connected to the board via
I2C, the rotary encoder is connected to 3 GPIO pins.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
8 years ago
Scott Lahteine edbc024d76 Disable UBL_G26_MESH_EDITING by default 8 years ago
Scott Lahteine 5a2abeca78 Merge pull request #6100 from thinkyhead/rc_soft_pwm_dither
Enhancement of PWM, with dithering
8 years ago
Stefan Brüns 35a55d5757 SOFT_PWM: Implement dithering if SOFT_PWM_SCALE is 1 or more
If dithering is enabled, the remainder of the soft_pwm_X duty value at
turnoff time is added to the next cycle. If e.g. the duty is set to 9 and
SCALE is set to 2, the PWM will be active for 8 counts for 3 cycles and
12 counts on each fourth cycle, i.e. the average is 9 cycles.

This compensates the resolution loss at higher scales and allows running
fans with SOFT_PWM with significantly reduced noise.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
8 years ago
Scott Lahteine 783338a0b8 Add UBL_MESH_EDIT_ENABLED to configs 8 years ago
Scott Lahteine e244399766 Additional cleanup of UBL code 8 years ago
Scott Lahteine 2512871a36 Patch configs UBL followup 8 years ago
Scott Lahteine 27b5666e15 Move Allen Key probe definition to the top 8 years ago
Scott Lahteine cf94688925 Univeral Bed Leveling - configuration 8 years ago
Scott Lahteine 0e410c9dfd Software endstop options as simple switches 8 years ago
Scott Lahteine 3e927ff204 Replace MBL Z hacking 8 years ago
Marek Pikuła 6836b94eea Added circle pattern for nozzle cleaning feature 8 years ago
Colin Gilgenbach 48b7e0f8d8 Nozzle Wipe Vertical Zig-Zag
- Add configuration support for zigzags in either the X or Y axis, for
wipe pads significantly longer in one dimension.
- Add configuration for default number of zig-zag triangles, vs. a
magic number in `Marlin_main.cpp`.
- Update description of auto nozzle wiping to match functionality
8 years ago
Scott Lahteine e282b72151 Remove non-applicable comment on MANUAL_Z_HOME_POS 8 years ago
esenapaj d38e335272 From "microseconds" to "milliseconds"
delay() is milliseconds
8 years ago
Scott Lahteine 5ab7b91615 Comment on filament runout sensor config 8 years ago
Scott Lahteine 78d6d6e076 Merge pull request #5452 from thinkyhead/rc_save_your_mesh
Save Bed Leveling to EEPROM
8 years ago
Scott Lahteine 1b2fb2bdc7 ABL_GRID_POINTS_* => ABL_GRID_MAX_POINTS_* 8 years ago
esenapaj 069c6b38dd Remove unnecessary tabs and spaces 8 years ago
Scott Lahteine da6a094424 Sanity-check inverting and pullups for Z probe and Z endstop
`Z_MIN_ENDSTOP_INVERTING` must match `Z_MIN_PROBE_ENDSTOP_INVERTING`
when using `Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN`.
This is easy to overlook.
8 years ago
Scott Lahteine aa241c63b3 Include M205 note in configurations 8 years ago
akaJes d7b948610a Experimental bilinear subdivision option 8 years ago
Scott Lahteine 3391c785c6 Support for distinct E factors 8 years ago
Scott Lahteine 415294801f Merge pull request #5330 from thinkyhead/rc_rgb_led
Support for an RGB LED using 3 pins
8 years ago
Scott Lahteine 65c50e062e Support for an RGB LED using 3 pins 8 years ago
jes f674246397 extend Configurations files 8 years ago
Scott Lahteine 092e949b58 Merge pull request #5169 from thinkyhead/rc_core_inverted
Support for COREYX, COREZX, COREZY
8 years ago
Scott Lahteine f6f77d34a1 Add a fade factor for mesh leveling 8 years ago
Scott Lahteine eb714ee873 Move dummy thermistor opts, fix redundant sensor comment 8 years ago
Scott Lahteine 7a99c6ce4f Reformat temp sensor listing 8 years ago
Scott Lahteine eb120e518c Followup to new endstop interrupts feature
- Fix typos, verbiage
- Fix naming of `setup_endstop_interrupts`
- Some formatting, indentation, spacing
8 years ago
Scott Lahteine 832fe284b4 Merge pull request #5184 from AnHardt/endstop_interrupts
Introduce endstop interrupts
8 years ago
Scott Lahteine 2330619da0 Merge pull request #5191 from petrzjunior/const
Replace const bool with #define for consistency
8 years ago
Petr Zahradník junior d7ce5d271b
Replace const bool with #define for consistency 8 years ago
AnHardt f3eee02596 Introduce endstop interrupts
If ENDSTOP_INTERRUPTS_FEATURE is enabled this tries to set up interrupt routines
for all used endstop pins. If this worked without errors, `endstops.update()` is called
only if one of the endstops changed its state.

The new interrupt routines do not really check the endstops and react upon them. All what they
do, is to set a flag if it makes sense to call the endstop test we are used to.

This can be used on:
* ARM (DUE) based boards - all pins can raise interrupts,
* RAMPS - all 6 endstop pins plus some other on EXT-2 can raise interrupts,
* RAMPS based boards - as long the designers did not change the pins for the endstops or at least left enough,
* all boards, if there are enough pins that can raise interrupts, and you are willing/able to swap with pins dedicated to other purpose.
8 years ago
esenapaj 2ae72b0491 Follow up the PR #5167 (Add Turkish Language) again, etc
・Update forgotten K8400\Dual-head\Configuration.h
・Adjust spacing
8 years ago
Scott Lahteine e3c8318504 Add reversed CORE options 8 years ago
Rigid3D 2327764980 Add Turkish Language 8 years ago
Scott Lahteine 0908329d96 Merge pull request #5057 from thinkyhead/rc_mbl_lcd_logical
Fix manual leveling coordinates
8 years ago
Scott Lahteine 14e60f0d3b Correct typo in configs
As pointed out by #5044
8 years ago
Scott Lahteine 4f6bfabaad Patch BAUDRATE line in configs 8 years ago
Scott Lahteine 1e551c0688 Revert "Squashed - Removal of PID functional range" 8 years ago
Rerouter 5f5d87cad3 Update Configuration.h 8 years ago
Scott Lahteine d19cfcfc1d max_jerk array, DEFAULT_XYJERK => DEFAULT_[XY]JERK 8 years ago
Scott Lahteine 473f4a17a8 Merge pull request #4914 from Rerouter/PID-Unconstrained-Itemp
Pid unconstrained itemp
8 years ago
Scott Lahteine 2d2c9bdf92 Add PROBE_Y_FIRST option for probe order 8 years ago
esenapaj 92c03a44a9 Fix the PR #4899 (ABL: Enable by type. Bilinear for all.) etc.
About Configuration.h:
・Fix the PR #4899 (ABL: Enable by type. Bilinear for all.)
Remove Duplicated contents

・Fix the PR #4305 (Custom boot screen feature improvement)
Revert from "during boot" to "during bootup" in all the example
Configuration.h

・Fix the PR #4207 (Clean up, simplify and generalize the Allen-key-probe
code.)
Resolve and relocate the duplicated definitions in Z_PROBE_ALLEN_KEY
section

・Follow-up the PR #4805 (Additional documentation of Configuration.h)
Add forgotten changes to all the example Configuration.h

Adjust spacing

About Configuration_adv.h:
Add missing description of SLOWDOWN for DELTA

Adjust spacing
8 years ago
Rerouter 50e5ee4de4 Update Configuration.h 8 years ago
Scott Lahteine ea0dbee3c9 Enable ABL by type, support bilinear on cartesian 8 years ago
Scott Lahteine 01f1028510 Try on "CLEARANCE" for size 8 years ago
Scott Lahteine 0e7d638a7a Revert to Probe Raise rather than Probe Height 8 years ago
Scott Lahteine e05af606a8 Clean up probe config options 8 years ago
Scott Lahteine c4dcfa254e Allow override of Z_ENDSTOP_SERVO_NR with BLTOUCH 8 years ago
Scott Lahteine e5505e3b33 Allow non-square leveling grid 8 years ago
Scott Lahteine d4599fd8ed Comment patches to Configuration.h 8 years ago
Scott Lahteine 723e983073 Default EXTRUDE_MAXLENGTH to 200mm 8 years ago
Scott Lahteine a6f6ed352b Fix comment on FILAMENT_RUNOUT_SENSOR 8 years ago
Scott Lahteine aaef7c6b89 Fix a misspelling of minimum 8 years ago