9ec2c03c5b
Fix likely error in retract/recover
...
Addressing #10200
7 years ago
1a75165f35
For set_z_fade_height use set_bed_leveling_enabled
7 years ago
53f0c7522a
Symmetrical FWRETRACT Z Hop
...
Do the Z lift normally before setting Z back to its prior value. But do the Z lower using spoofing. This should produce proper symmetrical movement.
7 years ago
ea1a83ce41
Use pgm_read_ptr for tables of pointers
7 years ago
daf643e1ce
[2.0.x] TMC: Match axis label order ( #10188 )
7 years ago
1cb810ff1c
[2.0.x] Automatically reset stepper timeout ( #10179 )
...
* Automatically reset stepper timeout in manage_inactivity
Any code that adds moves to the planner can skip resetting the stepper timeout. We can let `idle` / `manage_inactivity` reset the timer whenever it detects any moves in the planner.
* blocks_queued => has_blocks_queued
7 years ago
c3c264978f
correct truncated comment
7 years ago
9fd1016bb1
Trust the bootloader to clear globals
7 years ago
bc45fb6b13
Tweak use of move_z_after_probing
7 years ago
c352954882
Allow no raise after run_z_probe in probe_pt
7 years ago
ae39fbd646
Also suppress keepalive with suspend_auto_report
7 years ago
8dfaf1539e
Merge pull request #10102 from thinkyhead/bf2_eeprom_M913
...
[2.0.x] More complete Trinamic driver options
7 years ago
b5b39af531
[2.0.x] TMC: Fix CURRENT_STEP_DOWN ( #10170 )
7 years ago
cfc13ed7f3
Quiet M906/M913/M914 with axes. Patch for DISTINCT_E_FACTORS.
7 years ago
c95450016b
Improve Trinamic support in the EEPROM
7 years ago
48d7036874
Consolidate smart stepper driver initialization
7 years ago
dd2949922b
Consolidate 3-point leveling point options
7 years ago
1d22609473
MIN_PROBE_EDGE replaces DELTA_PROBEABLE_RADIUS
7 years ago
978f342392
Reduce some tmc_util strings
7 years ago
c0d694d5d3
Squash UBL postscript comment
7 years ago
1e946d681d
Update Marlin for newest TMC libraries
...
- TMC2130Stepper v2.2.0
- TMC2208Stepper v0.0.4
7 years ago
e6dcfa64b0
Cast SERIAL_CHAR to void in M122 ( #10086 )
7 years ago
e7a61de8af
[2.0] FWRetract Reset (Best way) ( #10083 )
7 years ago
34f656decd
Add TMC2208 include in tmc_util.h
7 years ago
14c03cb6f4
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) ( #10069 )
...
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
7 years ago
28f1276286
[2.0.x] Add Z_AFTER_PROBING option ( #10058 )
...
Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
7 years ago
d0ac0151b6
Fix typo in ubl.prepare_segmented_line_to
7 years ago
239902f861
Fix E2END and add EEPROM to Smart RAMPS
...
Reference #9983
7 years ago
26dc594ebb
prevent steppers from turning off during manual probes
7 years ago
cc59ac4603
Fix _tmc_say_axis string address
...
Fixes #10003
7 years ago
3c2bfa5e53
Update powersupply_on in power_on/off ( #10015 )
...
Fix #10004
7 years ago
ca577c1638
Fix up various spacing, comments, and typos
7 years ago
9515e5aefb
Fix LA_active_extruder (static)
7 years ago
1d604be671
Suspend auto-report during UBL map output
7 years ago
2057177184
Make enums into implicit char
7 years ago
e28e3bb532
Move extended_axis_codes to PROGMEM
7 years ago
b08ec22fe1
Show E0-E4 in monitor_tmc_driver output ( #9969 )
...
Fix #9966
7 years ago
eb867817b5
Prevent filament runout false positives ( #9946 )
7 years ago
beeed580b8
Implement digipots for MKS SBASE ( #9927 )
...
Fix #9477
7 years ago
24b9c1923f
ubl G29 tweaks
7 years ago
7bdb98c946
Fix #9826 . Solution by @gloomyandy
7 years ago
306f44198e
Prevent serial buffer overrun in Pronterface
...
75ms might be excessive... But I know people are seeing problems with PronterFace as the client...
7 years ago
966d9af98a
Mesh export in Bilinear + UBL M503
7 years ago
2228dff3ea
ubl.h compile flags from 1.1.x
7 years ago
f3dbe19669
Tweaks to HAL codestyle
7 years ago
5968a3e60e
Add ADVANCED_PAUSE_FEATURE include
7 years ago
93cc3a8492
Make used methods public
7 years ago
d504bbbfa4
Fix botched check for being off the mesh...
7 years ago
d3ca82d8c2
Support for multiple filament runout sensors
7 years ago
bd54ce830a
Include utility.h in neopixel.cpp
7 years ago
241e55ef3b
Apply SERIAL_FLUSH macro
7 years ago
749bc42aa9
TMC SGT is int8 ( #9651 )
7 years ago
2d749d490b
Fix / complete USE_CONTROLLER_FAN ( #9666 )
7 years ago
c49844df66
!ENABLED => DISABLED
7 years ago
304e0f8945
Followup to 21e60fd
...
`ENABLED` only works for flag-type options. Floats must use `#ifdef`.
7 years ago
21e60fd3ed
Allow user to control Z-Height correction for off mesh movements ( #9661 )
7 years ago
8d71ad37cb
flush comment to match 1.1.x
7 years ago
89165326b4
Cleanup after vim and vigor
7 years ago
38c7d53bf7
Repair some spacing
7 years ago
7280fa1e31
Patch Power class
7 years ago
5990266724
Init CS pins before loading settings ( #9566 )
7 years ago
cc9cef7f7a
Fix HAS_CONTROLLER_FAN in is_power_needed
7 years ago
b639f1ad4b
Correct some retract() comments
7 years ago
1541224a81
Enable Z axis and delta sensorless homing ( #9516 )
7 years ago
b2f8b4ada5
I2C position encoders update ( #9533 )
...
Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.
7 years ago
b5e92f4f90
[2.0.x] Enable / disable PSU automatically ( #9503 )
7 years ago
8a6feab1c4
Num-to-string functions for DEBUG_LEVELING_FEATURE
7 years ago
e5ee0b6f6c
Implement MALYAN_LCD
7 years ago
c46de340b7
Clean up trailing whitespace
7 years ago
e1fd9c08b3
[2.0.x] Add support for LPC1769 at 120 MHz ( #9423 )
7 years ago
ea5f91737f
Merge pull request #9392 from studiodyne/studiodyne-pause
...
[2.0.x] Pause resuming fix
7 years ago
6339b506c0
Make sure binary.h is included as needed
7 years ago
51d080d2c1
Update Pause
7 years ago
2bea1bda56
Move more strings to PROGMEM
7 years ago
45cfb16424
Merge pull request #8355 from tcm0116/2.0.x-TwoWire
...
[2.0.x] Master-only TwoWire (I2C) class for LPC1768
7 years ago
1dcfe193ac
Optimize some serial strings
7 years ago
3db35ba9be
[2.0.x] Fix change filament for delta machines ( #9295 )
7 years ago
b1cd012aa6
Clean up and document load/unload/pause/resume
7 years ago
266086670b
Better LCD message when heating needed
7 years ago
61bf8478a2
Add hotEnough methods
7 years ago
8190fdb260
[2.0.x] Option to use Neopixel as case light ( #9270 )
...
* Add option to use Neopixel as case light
* Apply CASE_LIGHT_USE_NEOPIXEL to example configs
7 years ago
bfd9728cf4
Serial buffer over run work around for v2.0.0 ( #9236 )
...
* Work around for serial buffer over run
PronterFace sends a lot of M105 commands. During long operations such
as UBL's G29 P1, G29 P2, G29 P4 and G26 this can over run the serial
buffer. This results (very often) in a M1 (actually a M1M105) ending
up in the command queue.
Until we figure out a better way to resolve this issue, this will keep
the UBL commands from experiencing bogus commands at thier completion.
7 years ago
af9b32e3b9
Give PronterFace time to print the UBL What information...
...
Give PronterFace time to print the UBL What information...
7 years ago
f5f1b069ad
Convert UBL mesh tilting to all use the same algorithm ( #9204 )
...
A number of regressions were patched also. The UBL G29 P2 and P4 Press and Hold had stopped working. It is very possible this is broken in the bugfix_v1.1.x branch also.
The main purpose of the Pull Request is to get the 3-Point mesh tilting to use the LSF algorithm just like the grid based mesh tilt. This simplifies the logic and reduces the code size some what. But the real reason to do it is the 3-Point case can be solved exactly. And by feeding these numbers into the LSF algorithm it provides a way to check all that code for 'correctness'.
7 years ago
6856eccc77
Master-only TwoWire class for LPC1768
7 years ago
43d3d024ac
Update tmc_util.cpp
7 years ago
ad500b01e0
Fixes TMC compilation error
7 years ago
6a043eee55
Various updates for TMC support
7 years ago
f7efac57b7
Multi-host support
7 years ago
9d923c6c03
Fix TMC gcode commands
7 years ago
60d07f20e7
Make mbl.has_mesh() a method
7 years ago
86818c9a89
Move MBL functions into the class
7 years ago
e89f1453ab
UBL G29 works without settings.load()
7 years ago
7541316bb4
Add M701/M702 Filament Load/Unload, M603
7 years ago
31582caa07
2.0 Fix for bad Pause extruder position resuming ( #9029 )
7 years ago
8afc4f8d9d
Fix UBL compilation warnings
7 years ago
9686ffedef
Single pause flag also indicates SD print pause
7 years ago
b259bb4670
Fix tmc_util global vars
7 years ago
4ef965cc40
Fix compiler warnings
7 years ago
4b49ea1e92
General cleanup of config-store, reset_bed_level
7 years ago
f704f405af
Add pause/resume actions on M600, M125
7 years ago
f0a8a1a853
[2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE ( #8866 )
...
* Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
7 years ago
705ea98fd3
Comment `return false` in motion functions
7 years ago
caa5093498
General DELTA_IK macro
7 years ago
913d9e9a59
Matching sign across filwidth vars
7 years ago
0cd1e91056
[2.0.x] TMC driver update ( #8769 )
7 years ago
d568e586b7
Fix up ubl_motion indentation
7 years ago
6d0678d963
Omit unused UBL motion code
7 years ago
3255712343
Skew Correction for UBL
...
Also remove unused grid slicing function when using UBL segmented.
7 years ago
3d796d8040
Move debug code
7 years ago
3db5303bfe
_buffer_line => buffer_segment
7 years ago
a71d2f3f40
UBL_DELTA => UBL_SEGMENTED
7 years ago
73e32925e4
References are better for array args
7 years ago
204199e1ce
Only compare XYZ to check motion
7 years ago
03ba79f144
Sync and report changed position
7 years ago
f58eb391aa
[2.0.0] Better off mesh behavior for UBL ( #8714 )
...
* Better off mesh behaviour for UBL
* Suggested ubl.h changes
7 years ago
cdfabbc507
Shorten error text in G29
7 years ago
c846388a65
Standardize LCD interface code for UBL a little
7 years ago
2fde60da12
Changes for parity with 1.1.x
7 years ago
24437de591
Use custom segment length for UBL Cartesian
7 years ago
48fb4e0932
Get Bi-Linear to work with G26
...
More corrections to make that happen...
7 years ago
0850b38b45
Get Bi-Linear working with G26
...
G26 uses logic that looks like:
```
ex = _GET_MESH_X(i + 1) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS));
```
The Bi-Linear macros need parenthesis to work correctly.
7 years ago
000b3b3117
Comment/cleanup of motion code
7 years ago
e37dd64548
Apply LEDColor, language fixes
7 years ago
cf0f78336b
New Feature: LED_CONTROL_MENU
7 years ago
ef2531558c
Add an option to segment leveled moves
7 years ago
276271e72f
Make MBL work more like PROBE_MANUALLY
7 years ago
e48fcad615
change G26 and G29 bit function names to avoid HAL collision
7 years ago
e34c6827ea
Init MIXING virtual tools as switching
7 years ago
b49acce035
Tweaks for lcd_external_control
7 years ago
ec04cf27d3
Fix the G26 out of scope identifiers in the v2.0.0 branch ( #8543 )
...
These changes may need to be warmed over. I tried to fix things with
the least amount of disruption. I just wanted to get the bugfix_v2.0.0
branch working for people again.
7 years ago
c6b0c104bb
Adapt G26 to work for all meshes
7 years ago
c19eb33408
Move G26 to gcode sub-folder
7 years ago
1ce0fb336b
Patch Max7219_LED_Set input args
7 years ago
550f1025f0
Try using <Arduino.h> everywhere
7 years ago
32512332df
Apply some formatting
7 years ago
d48cb6bf41
Apply coding standards to Max7219
7 years ago
50f09cc029
Miscellaneous cleanup
7 years ago
b76e173205
Move test extrusion options under G26
7 years ago
d4a1154c25
Use do_blocking_move_to where possible
7 years ago
cba9c1cf9e
Add pre-calculated planner.e_factor
7 years ago
600c85226e
Normalize load/unload length in M600
7 years ago
22e18fe832
Patch _manual_goto_xy for kinematics
7 years ago
0cfb936dd1
Clarify some motion code
7 years ago
8805e24cc7
Fix tilt_mesh_based_on_probed_grid output bug
7 years ago
24437fbb13
Fix G26 Y argument bug
7 years ago
ed62c621d7
Fix G26 Circle Drawing. Add Default Extrusion Settings ( #8313 )
...
- Fix G26 Circle Drawing.
- Add default extrusion settings so machine can print lines on print bed
- Yet to be done: Get LCD Menu's to use these settings.
7 years ago
cc4d28b73c
Update bilinear for native workspace
7 years ago
297666ea14
Use fastio for Alligator dac084s085
7 years ago
d295f984e3
Update fwretract.cpp
7 years ago
Scott Lahteine