9392 Commits (e229b831fab7b3e789631ea004640b7c82555253)

Author SHA1 Message Date
Marcio Teixeira 056561df93 [2.0.x] Enhancements to FILAMENT_RUNOUT_SENSOR (#12069)
- Added FILAMENT_RUNOUT_DISTANCE_MM option
- Added FILAMENT_MOTION_SENSOR option
6 years ago
Scott Lahteine cce4931342 Clean up recent contribs 6 years ago
Karl Andersson 8b5e51c9aa STM32F4xx modifications for HAL_STM32 (#12080) 6 years ago
Scott Lahteine bf0c809ff2 Update M165 comment 6 years ago
AnHardt 9ac9649183 Mixer - update descriptions (#12108) 6 years ago
Scott Lahteine 9bf5d4331c Clear up some compiler warnings 6 years ago
Scott Lahteine 0139762a96 Fix a sanity check 6 years ago
Scott Lahteine 2ecb124e42 Fix trailing whitespace 6 years ago
AnHardt f56968ba0b New Continuous Filament Mixer (#12098) 6 years ago
Ludy 2d2cd628c6 Update German language (#12094) 6 years ago
Scott Lahteine 84b59d58fb Clean up whitespace 6 years ago
swilkens 06e2afe8e0 [2.0.x] Reduce HOMING_FEEDRATE_XY for Ender 3 (#12105)
Homing on the Ender 3 with HOMING_FEEDRATE_XY set to 50*60 was shown (#12074) to cause the end-stop micro-switches to bottom out, causing the carriage for both X and Y axis to physically crash into the micro switch. Reducing the homing speed prevents the switches from bottoming out.
6 years ago
TheSFReader af939c158a Option for G0 to have a separate feedrate (#12089) 6 years ago
Christopher Pepper e5b4bf22d4 Remove debug output from flash persistent store implementation 6 years ago
Christopher Pepper 42fb7c14b0 Update the sdcard usb sharing config and apply to Re-ARM 6 years ago
Christopher Pepper 254b68fe2c servo update 6 years ago
Andy Shaw 870bfd08f5 usb and sdcard sharing improvements
* Add traceback after watchdog timeout

Add the cpability to perform a traceback following a watchdog timeout.

* Enhanced hardware SPI

Allow use of either SSP0 or SSP1.
Ensure that no data is left in I/O buffers after calls to enable sharing of SSP hardware.

* Make flash emulation of eeprom the default

Make use of flash for eeprom storage the default. This means that usage of eeprom will not cause USB drive mount/unmount operations.

* Allow sharing of SD card

SD card I/O operations from the USB stack take place in idle loop, rather than at interrupt time. Allowing sharing of the SPI bus.

New configuration options to allow usage of the SD card to be specified.

* Fix problem with hardware SPI pins
6 years ago
Christopher Pepper 5ddf52d58e [HAL][LPC176x] Pull out framework into separate repository
Framework and build platform now located at https://github.com/p3p/pio-framework-arduino-lpc176x and https://github.com/p3p/pio-nxplpc-arduino-lpc176x respectively

fix mkssbase leds

move hardware serial

remove hardware/software serial

Hardware Serial extraction

HardwareSerial ISRs

fix disabled serial2 causing Serial object to link

move usb devices out to framework

separate out adc/pwm peripheral function from hal.cpp

fix includes

remove unused pwm init

move adc

HAL header update

templated filtered adc

LPC1769 platform
6 years ago
Roman Moravčík 213e94bce2 [2.0.x] Updated slovak translation (#12059) 6 years ago
Karl Andersson a40458405a Fix datasize error when FWRETRACT is disabled (#12086) 6 years ago
Scott Lahteine 951b25163e
Extend M217 with configurable park/raise (#12076) 6 years ago
Kevin Velickovic ea13a77dcb Fixed Z-Probes NO/NC for Anycubic Kossel (#12083) 6 years ago
N95JPL ab9d5eb38d Add Bootscreen Animation (#12077) 6 years ago
Scott Lahteine 26208a5c2f Clean up some boot screens 6 years ago
Scott Lahteine 9b6be0ae0f Fix lite status screen SD % 6 years ago
Scott Lahteine af3bf6c956 Tweak config spacing 6 years ago
Scott Lahteine a44ef27897 Outdent singlenozzle toolchange code 6 years ago
Scott Lahteine d338e4d875 Fix singlenozzle toolchange cold extrusion test 6 years ago
Roxy-3D 25b980dddb
Remove erroneous Pin 12 definition
There is no switchable Power Supply.   Don't put it on Pin 12.   
(Pin 12 is actually FAN1)
6 years ago
Scott Lahteine ddaef1a60c Clean trailing whitespace 6 years ago
Scott Lahteine 1407afad73 Move SENSITIVE_PINS to its own file 6 years ago
Scott Lahteine 45e738876a Add stepper MS3 support
Co-Authored-By: TheLongAndOnly <thelongandonly@users.noreply.github.com>
6 years ago
Giuliano Zaro d43d4e4219 Refactor PRINTER_EVENT_LEDS, apply to M303 (#12038)
Co-Authored-By: Giuliano Zaro <gmagician@users.noreply.github.com>
6 years ago
Giuliano Zaro d8d76cd2ba [2.0.x] Italian language update (#12060) 6 years ago
Scott Lahteine e8d2cf4fb5 EEPROM followup (tmc_stepper_current_t) 6 years ago
Scott Lahteine 50cbca4c55 Hide some menu items when busy 6 years ago
InsanityAutomation 3cb5517ddb Make singlenozzle tool-change honor no_move (#12056)
...Set no move earlier so it applies
6 years ago
InsanityAutomation d332fcb8fa Fix firmware-retract compile errors (#12061) 6 years ago
Scott Lahteine 43940d59ed Fix trailing spaces 6 years ago
InsanityAutomation b2c1cd7eda Allow cold change of active extruder (#12055)
Followup to #11994
6 years ago
Scott Lahteine d556dc1865
Fix and improve EEPROM storage (#12054)
* Clean up Temperature PID
* Improve EEPROM read/write/validate
* Group `SINGLENOZZLE` saved settings
* Group planner saved settings
* Group filament change saved settings
* Group skew saved settings
* Group `FWRETRACT` saved settings
6 years ago
Scott Lahteine 9b5c1a5e77 Fix EEPROM checksum bug
Addressing #12048
6 years ago
Scott Lahteine 272d4a5167 Apply #pragma once 6 years ago
Scott Lahteine 07d33849b0 Fix unused var warning, apply ENABLED 6 years ago
Hannes Brandstätter-Müller a3e8cb1e44 [2.0.x] Ender-4 small improvements in Configuration (#11843) 6 years ago
Scott Lahteine cf5284cdf2
Add SD Firmware Update capability (#12043)
Co-Authored-By: timoxd7 <timoxd7@users.noreply.github.com>
6 years ago
Scott Lahteine 0bd54392b7 Use uint8_t in EEPROM code 6 years ago
Scott Lahteine ce82015d5f Fix include in G80 6 years ago
Marcio Teixeira cef1de89d0 Fixed incorrect axis index. (#12051) 6 years ago
Marcio Teixeira d6d48e63fb Allow #defined TYPE arg to ultralcd menu macros (#12041)
Previously, it was not possible for the TYPE argument to ultralcd menu macros to itself be a #defined value. This made it difficult to create variables to set many related menu items to a common precision that could be easily changed.
6 years ago
Emilio Moretti 2ef7175b42 Update Ender-2 BED_MAXTEMP (#12042)
Also added details to the README to make sure the Ender-2 status is properly documented.
6 years ago
Scott Lahteine 5f6aabccbe Tweak M48 spacing 6 years ago
Marcio Teixeira ec9aa4f468 [2.0.x] Miscellaneous fixes (#12039)
* Allow override of soft SPI pins in `pins_*.h`
* Add default case to avoid compiler warning.
* Additional pin definitions for Archim 2.
* Einsy Retro has same timings as Einsy Rambo.
6 years ago
Marcio Teixeira 906a24fa81 Extensible user interface API (#11193) 6 years ago
InsanityAutomation ee253991d4 Various fixups for single-nozzle filament swap (#12036) 6 years ago
Marcio Teixeira 8dbb305e8e Fix "Missing separator" errors. (#12035)
- Makefiles require tabs (not spaces) before shell commands.
- Other indentation can either be space or tabs.
6 years ago
Scott Lahteine 55e810d512 Fix G80 compilation 6 years ago
Scott Lahteine d5017e2788 Add status screen with 4 nozzles 6 years ago
Scott Lahteine 7db0113b53 Improve E_AXIS_N macro 6 years ago
Nils Hasenbanck 191df5e17d Correct PWM_PIN behavior for STM32 HALs (#12027) 6 years ago
Sam Lane f2ecf8d510 Add option to control Solenoids under PARKING_EXTRUDER (#12028) 6 years ago
InsanityAutomation 74cd6cb4fc Single nozzle filament change (#11994) 6 years ago
Scott Lahteine bfcf570d68 Try ISR_ALIASOF for Endstop Interrupts 6 years ago
Giuliano Zaro c0d9058e25 Shorten an Italian menu title (#12034)
…and change a multi-use "back" menu item.
6 years ago
teemuatlut dffb4c63dc [2.0.x] TMC2660 followup (#12029)
* Don't react to s2g on TMC2660. False positives
* Init with sensorless probing as well
6 years ago
Scott Lahteine d6b0fbd771
Use uint8_t for all fan speeds (#12032) 6 years ago
Scott Lahteine cb7844c8d4
Save PROGMEM on serial prefixes (#12033)
With default config and `EEPROM_SETTINGS`, saves over 200 bytes of PROGMEM.
6 years ago
Scott Lahteine 07db08e39d Fix EXTRUDER_AUTO_FAN_SPEED comment 6 years ago
Scott Lahteine ca0e308105 Fix up some units comments 6 years ago
Scott Lahteine 65b8f3821b Suppress temperature.h compile warning 6 years ago
teemuatlut c447d75916 Add support for TMC2660 (#11998) 6 years ago
Scott Lahteine cf0b9eb37c no need to use destination in do_pause_e_move 6 years ago
Scott Lahteine e8d677620c Use NUM_SERVOS in EEPROM code
Fix #12015
6 years ago
Scott Lahteine 0fcdfdeed6 Followup to #12017 6 years ago
Phr3d13 acac2adfc8 Add support for MeCreator2 (#12017) 6 years ago
Thomas Moore 49823a4939 Fix broken jerk handling (#12019)
Fix #12004
6 years ago
Scott Lahteine 52a37913c1 Extend and apply some corrections 6 years ago
Scott Lahteine 77b9a41f1f Add G-code extensions to example configs 6 years ago
thesfreader e09c144674 Add CNC-like G-code options 6 years ago
Scott Lahteine 33056046a3
STM32 non-generic PWM_PIN and USEABLE_HARDWARE_PWM (#12016) 6 years ago
Scott Lahteine d5141c4e03 Fix up leading/trailing whitespace 6 years ago
Marcio Teixeira 03fc4d31d0 Makefile support for 32-bit Archim board and new TMC library (#11997)
* Support new TMC library and 32-bit Archim board

- Added IS_MCU flag
  - When IS_MCU flag is 1, AVR compiler will be used
  - When IS_MCU flag is 0, ARM compiler will be used
- Added support for new TMC library
- Added support for a 32-bit Archim board, which could probably be used as a basis for other 32-bit boards.
6 years ago
Scott Lahteine 65b36642f8 Fix Anycubic Kossel config 6 years ago
Scott Lahteine fc326b3dde Add USB_FLASH_DRIVE_SUPPORT to examples
Co-Authored-By: marcio-ao <marcio@alephobjects.com>
6 years ago
Marcio Teixeira 2067619a26 Add USB_FLASH_DRIVE_SUPPORT 6 years ago
Giuliano Zaro 07fe8d28be [2.0.x] Partial Italian revert (#12008)
- Use a comma for decimals just in one message has not been a good idea.
- Full comments translation
6 years ago
Scott Lahteine 517b4f4cd4 Fix lightweight UI hotends display 6 years ago
Giuliano Zaro 72a750e0eb [2.0.x] Update Italian language (#11996) 6 years ago
Scott Lahteine bb561baf9e Tweak some config comments 6 years ago
Nils Hasenbanck fcf6d127fd STM32 timer simplification (#11995)
Prescalers aren't calculated for the given target frequency.
Stepper timer should run at 2 Mhz and temperature timer at 72 Khz.
6 years ago
Scott Lahteine 8daadd2c8c
Fix TMC_DEBUG undefined report_tmc_status (#11993) 6 years ago
Scott Lahteine c40ea1f0fd Update EEPROM_VERSION
And set EEPROM_OFFSET to 0, since the historical 100 skipped bytes are never used.
6 years ago
Scott Lahteine 1358bd9319 Make MAX_EXTRUDERS always 6 6 years ago
AnoNymous 001f26b642 Template struct simplification for serial (#11990) 6 years ago
Scott Lahteine 348004c34f
STM32F7 HAL using the official STM32 Arduino Core (#11750) 6 years ago
Scott Lahteine 3e58b3a5d4 Followup to #11943 6 years ago
teemuatlut c3229e1b34 Migrate to a new TMC library (#11943) 6 years ago
brian park 2abf3d258d Korean language translation support (#11987) 6 years ago
Eduardo José Tagle d6955f25b2 Expand serial support in DUE/AVR hals exploiting the templated MarlinSerial classes (#11988) 6 years ago
Eduardo José Tagle f6f2246f59 Templatized serial classes (#11982) 6 years ago