3a916b4ef2
Create bresenham.h
6 years ago
5d3928cb01
PWM is not defined on Arduino Core STM32 ( #13405 )
6 years ago
9a515cbd32
Fix Pause Print message and behavior ( #13394 )
6 years ago
f5bcc00570
Unify debugging output with debug_out.h ( #13388 )
6 years ago
cc8a871705
Add capability string CHAMBER_TEMPERATURE ( #13391 )
...
Reference: #13380
6 years ago
67bee06e43
No patch needed for non-libmaple analogWrite
...
See https://github.com/pinchies/Marlin/pull/1#issuecomment-471388743
6 years ago
f89b375fb9
Fixes and improvements for PWM pins ( #13383 )
6 years ago
87162658c4
Fix and improve software endstops ( #13386 )
6 years ago
6214c997c0
Remove includes of <binary.h>
6 years ago
4555ae448f
Fixups for ESP32
6 years ago
a5ea3e2f15
Fix hotend offset on switching toolhead change
...
See commentary at #11623
6 years ago
8e0ac93d60
Fix 'UNUSED redefined' compiler warning ( #13387 )
6 years ago
0278ad0a6d
Add ESP32 WiFi interface ( #11209 )
6 years ago
c03df89921
ExtUI Mesh Leveling Extensions ( #13363 )
6 years ago
050eac03af
Single X Duplication Extension ( #13373 )
...
* Multi-nozzle selective duplication
* Use a bit-mask, reduce stepper_indirection.h size
* Tweak the multi-nozzle duplication description
* Use 'S' as a bool in M605
* Add HAS_DUPLICATION_MODE conditional
* Remove '_MODE' from the option name
* M605 in the style of Stacker M280
* Also include direct mask style (P)
6 years ago
ad91476d26
Fix USEABLE_HARDWARE_PWM
6 years ago
d63da4592d
Tweak to SCARA_move_to_cal
6 years ago
51ff5b68fa
Clean up fastIO ahead of PWM patch
6 years ago
388babbcea
Tweak SERIAL_PRINTF
6 years ago
d94e077901
Apply HAS_HOTEND_OFFSET where needed
6 years ago
11d6a939df
Always define axis_unhomed_err
6 years ago
10c8c034bd
Allow both encoder and ADC keypad ( #13355 )
6 years ago
0375e92847
Followup to serial rework
...
As mentioned in #13370
6 years ago
013bb469ca
Fix compilation for STM32F1 with no SDIO ( #13366 )
6 years ago
e52bcc9408
Limit top bed temp to BED_MAXTEMP - 10
...
The chances of a 10° overshoot is pretty minimal.
6 years ago
785a7028bf
Followup to 'volatile' patch ( #13369 )
...
Originally #13344
6 years ago
aa1d587128
Some LCD code cleanup
6 years ago
fa11427ec6
Remove obsolete LCD_CONTRAST
6 years ago
4df9509ead
Add support for printers with inverted fan pins ( #13362 )
...
Add support for printers with inverted fan pins by adding `#define FAN_INVERTING 1` to `Configuration_adv.h` and modifying the fan write macros.
6 years ago
1f7e220387
Make HAL ISR macros function-like
6 years ago
e3ce346f24
Report position to host in Nozzle::park
6 years ago
77b4176152
Use lib include for bit_constants.h
6 years ago
3419099f0a
Clean up whitespace
6 years ago
4c43e6c48b
Fix "spontaneous heating" issue (WRITE bug) on STM32 ( #13356 )
...
Should fix "spontanous heating" problems due to order of operations error. Error occurs at least with ststm32 v5.1.0 in PlatformIO.
6 years ago
b824a517aa
Add G38.4 and G38.5 ( #13348 )
6 years ago
e4d080e63c
Reset after kill with a button on the KILL_PIN ( #13091 )
6 years ago
c36989c39e
Fix chamber temperature measurement ( #13350 )
6 years ago
12503fce06
Followup to wait_for_user fix
6 years ago
33a08fc6f7
Fix typos from temperature rework
...
Followup to #12201
6 years ago
2efbcc90c5
Fix wait_for_user compile error ( #13352 )
6 years ago
60e82e3929
Send notifications to ExtUI for M0/M1 ( #13344 )
...
- Send notifications to ExtUI for M0/M1
- wait_for_user can be non-volatile (not changed by interrupt)
C / C++ compilers don't optimize away reads of non-volatile variables when a function call is used between accesses, because *any* variable could be changed by the function call. Since `wait_for_user` can't be changed without a function call, it should be non-volatile so the compiler can optimize away cases where it is read more than once without an intervening function call.
6 years ago
00fc43144a
Follow up fixes to various PRs. ( #13334 )
...
- Ensure `MarlinUI:get_progress` is defined for `ExtUI`.
- Fix for `BACKLASH_SMOOTHING` with small segments.
`BACKLASH_SMOOTHING` with extremely small segments failed to fully correct due to the correction factor being rounded down. Rounding up ensures the entire backlash will converge to zero even for small segments.
- Add pinout for the beta revision `EINSY_RETRO`.
- Update soft endstops with tool offsets (for toolchange et. al. move clamping) (#12568 )
6 years ago
c7d618b4d9
Fix SERIAL_ECHOLNPAIR
...
Fix #13333
6 years ago
d54741eda8
Update some G26 plausible values. Add speed control. ( #13330 )
6 years ago
fb3302feda
Fix STM32F1 Serial and ADC pins ( #13331 )
6 years ago
dbead66988
Allows user to set (almost) any PWM frequency ( #12638 )
6 years ago
afbec5ff7e
Have ExtUI::getProgress use ui.get_progress ( #13328 )
6 years ago
645ca7af7a
M141 Heated Chamber, Temperature rework ( #12201 )
6 years ago
44571775bd
Further support for 6 extruders
6 years ago
893ee68b52
Clean up trailing whitespace
6 years ago
39f1222060
One fewer G29 error string
6 years ago
cfdb38eda4
Allow SERIAL_ECHOPAIR to take up to 12 pairs ( #13311 )
6 years ago
4771e372a1
Update criteria for PAUSE/RESUME/STOP menu items ( #13294 )
6 years ago
56fdcf93d1
Disallow SD_DETECT_INVERTED with FYSETC F6. ( #13307 )
6 years ago
7ce13a6ec1
Fix a print_job_timer compile error ( #13304 )
6 years ago
6df51201ae
Include EXTENSIBLE_UI in single LCD sanity check ( #13306 )
6 years ago
2e5a3b01fd
Save Power Loss Recovery only on move commands
6 years ago
15738ea506
Update a motion comment
6 years ago
bc87e97357
Prevent a tool change move out of bounds
6 years ago
2212da453a
Distinguish between analog/digital auto fans ( #13298 )
6 years ago
2513f6b550
Fix multiport G28 with Binary Transfer ( #13308 )
6 years ago
38bef9da91
Report auto temp to both serial ports, if available ( #13301 )
6 years ago
367d392880
Init stepper current after stepper pins are set up ( #13302 )
6 years ago
bf8b38e0f7
Relocate configs above Marlin/src folder ( #13299 )
6 years ago
d71dc5cf42
Fix for Ender 4 fan/case light pin
...
See #12731
6 years ago
7640b328df
Support for Tronxy X5S 2e ( #13297 )
6 years ago
599cdc3f0f
Remove dead code from get_pid_output
...
See #12981
6 years ago
35ae5daf2d
Split up sdcard G-codes
6 years ago
3f36a38512
Clean up some pre-serial-redirect includes
6 years ago
fa0d909dd3
Add FIL_RUNOUT_PIN for BIGTREE_SKR_V1.3
...
See #13267
6 years ago
bd4160dbaf
Unused CS_ACTUAL_sb ( #13282 )
6 years ago
71773b128d
Fix stepper use before init. Add Ultimaker2+ Extended clone config ( #13284 )
6 years ago
edc4e037c4
Add a note to G10
6 years ago
57afd0ab37
Fix range check bug in FileList::seek() ( #13286 )
...
When `count()` returns 0, `pos > (count()-1)` will always yield `true` due to integer underflow.
6 years ago
05c2f80826
Fix bug in wait-for-heatup ( #13290 )
6 years ago
b0553d2d97
Add M997 support and simple implementation for LPC176x ( #13281 )
6 years ago
fa236e9718
General cleanup ahead of L64XX
6 years ago
2f1e1dcb42
Gradual step towards EXTRUDERS 0 support
6 years ago
99d0022fae
Drop the Z_MIN_PROBE_ENDSTOP option ( #13276 )
6 years ago
9a6b90f47d
TMC2660.h comment tweaks
6 years ago
a2e3226597
Init XYZ to configured home position
6 years ago
4fbbce9a35
Marlin Dev Mode for DOGM status screen
6 years ago
e2e2a55d9b
Add thermistor type 67 SliceEng ( #13275 )
6 years ago
5b7ad3a5a0
Fix SKR onboard TF card CS pin ( #13272 )
6 years ago
7fde3ed915
Skip hysteresis check when temp is already close to target
...
To eliminate a long delay during pause, park, and filament change
6 years ago
7de6476b3d
Fix binary protocol error
6 years ago
2c10222e87
card.transfer_port => transfer_port_index
6 years ago
4ab433d391
Fix binary protocol with one serial port ( #13270 )
...
- The `sdcard.transfer_port` variable is Marlin's internal serial port index, not the physical serial port number.
- Added packet number to "ok" response so hosts don't need to wait for the ACK.
- Renamed feature to `BINARY_FILE_TRANSFER`, as the speed up is only consequential to the ability to transfer binaries over serial.
6 years ago
eb4bf93ea4
Add more Babystep options ( #13262 )
6 years ago
f37df28d17
UBL G29 T current position fix
...
Counterpart to #12845
6 years ago
f8a39919fa
Add Bigtree SKR 1.3 board ( #13267 )
...
Co-Authored-By: Msq001 <msq001@users.noreply.github.com>
6 years ago
ddbe4cfa20
Printrboard G2 support ( #13116 )
6 years ago
4200f9ed62
Hide freeMemory et.al. warnings
6 years ago
dc88747770
Fix Due GET_ARRAY_IS_DIGITAL
...
Co-Authored-By: bob-the-kuhn <bob.kuhn@att.net>
6 years ago
a79b9bbe6b
Cleanup whitespace, add a const
6 years ago
2616e4d4d9
Remove duplicated 'chitchat' defines ( #13258 )
6 years ago
5d28575d4d
Clean up some motion code
6 years ago
808b076000
Update some ABL/UBL conditionals
6 years ago
833c2e54a1
Add an empty flushTX to MarlinSerialUSB_Due
6 years ago
38363902c7
Fix sanity checks for distinct E factor settings
...
Reference #13156
6 years ago
64253e1a58
Followup to serial reform
...
Reference #13250
6 years ago
92a4984066
Fix G34 probe position ( #13251 )
6 years ago
e15354e387
Simplify serial port redirect ( #13234 )
6 years ago
88cc1d1a31
Fix Preprocessor syntax in Re-ARM pins file ( #13247 )
6 years ago
76e9ee33aa
Fix include order to make SERIAL_PORT_2 work ( #13241 )
6 years ago
562f2321d2
Fix a G34 bug, allow negative Z corrections ( #13240 )
6 years ago
edf025ed8d
Update Spanish language ( #13236 )
6 years ago
02fec89a0d
Turn fans off in zero_fan_speeds
...
Addressing #13231
6 years ago
15aa932aa6
HAL for Linux ( #13146 )
6 years ago
5eb82ca6a8
Change SSD1306_OLED_I2C_CONTROLLER to HAS_SSD1306_OLED_I2C ( #13223 )
6 years ago
109e67169c
Define G21 as NOOP w/o INCH_MODE_SUPPORT ( #13229 )
...
Ticket #13228
If `INCH_MODE_SUPPORT` is undefined, G20 is an unknown command as it should be (Marlin is, by default, operating in metric mode). G21, however, is found in many slicers and printer start gcode sections and should be accepted (as a NOOP) to avoid the unknown commands.
6 years ago
31b0be74af
Fix autotemp_factor menu setting ( #13226 )
...
Fix #12643
Only factors above 1 can have a 'positive' effect.
6 years ago
f6ab62bc13
Fix Creality CR-10 S5 filament change ( #13219 )
6 years ago
9f5e4e5ad8
Update LPC1769 Pins Files ( #13183 )
6 years ago
608a6810e7
Fix DOGLCD_A0 pin in pins_Smoothieboard.h ( #13217 )
6 years ago
80359c9937
Add more parameters to M240
...
Co-Authored-By: shitcreek <45380455+shitcreek@users.noreply.github.com>
6 years ago
a43e892fb5
Use 8-bit i2c address on LPC platform
...
Fix #9799 — hopefully not a unicorn
6 years ago
631d867dc9
HAL cleanups
6 years ago
89bbc30a09
Fix init of power supply pin
...
Fix #13184
6 years ago
44c22e3935
Provide a default MAX6675_SS_PIN for ReARM
...
See #8010
6 years ago
3c9a7926c2
Fix compile error with JUNCTION_DEVIATION
...
See #13000
6 years ago
758c6c9464
Very minor SPI speedup
6 years ago
422dd6666e
Fix Due EEPROM write bug
...
See #13065
6 years ago
03e109c4a3
FLASH_EEPROM => FLASH_EEPROM_EMULATION
6 years ago
50917ccda6
Tweak some u8g interface code
6 years ago
ba39186364
TMC_DEBUG optimization and improvements ( #13135 )
6 years ago
1424b368cf
Tweak M122 comment in configs
6 years ago
3a1b6fe8c1
Coding standards
6 years ago
19af90face
Fix a host action compile error ( #13208 )
6 years ago
992cdc8d14
Fix host action / G-code ordering in event_probe_failure ( #13207 )
...
Observing from the console, it makes the most sense to do `//action:probe_retry` before executing commands.
6 years ago
33a6d52965
Fix a RAPTOR2 pin conflict ( #13205 )
6 years ago
52665f54ad
Fix bad Purge More logic ( #13193 )
6 years ago
18458ec42b
Error in Smoothieboard for unsupported display
6 years ago
d4ed9b3ef1
Babystep also requires homing ( #13191 )
6 years ago
ca7b2f574f
Fix condition on tool change filament swap menu ( #13190 )
6 years ago
208ab8b366
Fix compilation with one service interval ( #13185 )
6 years ago
567d03a269
Update Slovak language ( #13187 )
6 years ago
27203c62b8
Enable M240, set photo pins for 3DFabXYZ i3 ( #13174 )
6 years ago
3025ddf179
Support for Creality CR-10 5S ( #13173 )
6 years ago
e00aad84af
Add M240 parameters D I J R S
6 years ago
31c240a8db
Enhancements to G425 ( #13159 )
...
- Turn off bed leveling prior to calibrating.
- This prevents lateral probes from having a Z component that
triggers the Z endstop and causes the motion to be aborted.
- Got rid of static const float arrays "dimension" and "true_center"
- Frees up 24 bytes of SRAM
- Changed incorrect use of "bool" for float in backlash macros.
- Replaced arguments with 0.0f and 1.0f for clarity.
- Now only disables soft endstops (since calibration cube is outside of bed)
- Not necessary to disable global endstops
6 years ago
84fc400aba
Update BIQU SKR V1.1 pins, add TMC2130 settings ( #13166 )
...
* Remove untested displays add TMC2130 configs.
* Remove references to the ReARM, delete untested displays. Add TMC2130 settings. Cleanup spacing, etc.
6 years ago
ab2816c870
Patch for M240
6 years ago
d2bdb71c13
Add PHOTO_GCODE option, photo trigger physical move ( #13168 )
6 years ago
be9a409980
Fix M125 XY parameters, export get_homing_bump_feedrate
6 years ago
ce40c2e87c
Use do_blocking_move_to(ref, fr)
6 years ago
bdc2f10b90
Update Italian language, fix unused var warning ( #13164 )
6 years ago
9f0e1834ec
Followup to #13039 ( #13163 )
...
- Fix compile error when accessing `process_subcommands_now_P`.
- Use `const` var eliminating double-negative (to make code more understandable).
6 years ago
1ace97e946
[2.0.x] Update German language ( #13150 )
6 years ago
7cf9b93f26
Add HAS_FILAMENT_SENSOR ahead of 12962
6 years ago
Scott Lahteine