microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity
1,808 Commits
1 Branch
0 Tags
110 MiB
2.0.x
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '80afded132'
${ noResults }
Commit Graph

1474 Commits (80afded132cf13b3951ef6945253f76c2f427c9e)

Author SHA1 Message Date
Filip Mulier 62db9848d3 Improvements and bug fixes in sensor delay buffer for filament sensor code 
Improvement to avoid reinitializing delay buffer with every print. Fixed
issues in buffer indexing and memory out of bounds due to floating point
imprecision.  Simplified the code by avoiding conversion to standard
diameter and 1cu mm extrusion, which caused complications in determining
mm extruded.
 11 years ago
Florian Baumann 5908fd5cec Fix reseting CHDK pin to LOW 
chdkActive was set to false regardless of (millis() - chdkHigh) being bigger than the CHDK_DELAY or not. So if (millis() - chdkHigh) wasn't bigger than the delay the first time, the CHDK would never be set back to LOW.

Also, don't return from the function, as there might be other stuff to do, after the CHDK check.
 11 years ago
Roxy-3DPrintBoard 0adbc79571 Fix Default Configuration so Auto Bed Leveling is off 
This snapshot has the Auto Bed Leveling turned off because most Marlin
users do not have that feature.
 11 years ago
Roxy-3DPrintBoard 0091865583 Z_PROBE_REPEATABILITY test 
Z_PROBE_REPEATABILITY test for Auto Bed Leveling.
Implemented as M48 with extra user specified options.
Full support at
http://3dprintboard.com/showthread.php?2802-Auto_Bed_Leveling-Z-Probe-Repeatability-code
 11 years ago
Filip Mulier 85649a4549 Real-time filament diameter measurement and control 
This feature allows the printer to read the filament diameter
automatically and adjust the printer in real time.  Added code to read
an analog voltage that represents a filament diameter measurement.  This
measurement is delayed in a ring buffer to compensate for sensors that
are a distance away from the extruder.  The measurement is used to
adjust the volumetric_multiplier for the extruder.  Some additional g
codes (M404, M405, M406, M407) are used to set parameters and turn
on/off the control. g code M221 is updated.  Pins for RAMPS1.4, RAMBO,
and Printrboard are identified for analog input.  The configuration file
is updated with relevant user parameters.
 11 years ago
Filip Mulier 1d0fe035f3 Change pinMode to SET_INPUT or SET_OUTPUT 
Original code is using WRITE from fastio, but original used pinMode to
set pin direction and did not use the fastio SET_INPUT or SET_OUTPUT.
This caused an issue with the rotary encoder interface to  boards based
on teensyduino, since for teensyduino pin numbers for fastio and the
usual Arduino IO are different.
 11 years ago
Charles Bell e7707aedbc Commented out new #defines in Configuration.h. 11 years ago
Charles Bell 0a8dc0e96b Added documentation to the README.md for the sled Z probe option. CAB 11 years ago
Charles Bell d2fcb3ee56 CAB: Added code for Z-probe with Z endstop mounted on a sled. 11 years ago
Neil Darlow 3cd7dbcc45 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 11 years ago
daid c13a831ea1 Merge pull request #1017 from foosel/fix/checksum_truncation_bug 
Fix for a wrong checksum truncation for certain commands
 11 years ago
Gina Häußge 2d22902d08 Fix for a wrong checksum truncation for certain commands 
Positioning of string terminator to truncate checksum from the commands
M23, M28, M30, M32, M928 and M117 was off by one, causing the last
letter of the actual command to be truncated instead of just the
checksum.

In case of the SD commands this caused checksummed commands targeting
existing files to fail since the last letter of the filename was
truncated.

In case of M117 this caused the last given letter not to be displayed.

This patch fixes the off-by-one error and sets the null terminator
on the exact position of the * starting the checksum instead of the
character before that.
 11 years ago
cocktailyogi ad3b770c1a updated examples 11 years ago
cocktailyogi 2f4a20257c imported last Marlin changes 11 years ago
daid aacff0d361 Merge pull request #948 from Dim3nsioneer/Marlin_v1 
Implementation of FW extruder change retract
 11 years ago
midopple 17aa67e4ea If the option DISABLE_INACTIVE_EXTRUDER ist active the extruder switch to early to inactive because there are some moves in the buffer. So the planner wait 32 moves to disable the unused extruder. 11 years ago
Robert Quattlebaum 1fd9a7d476 Fix for FWRETRACT on DELTA printers. 
Fixes #817
 11 years ago
Neil Darlow 3f2c771d90 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 11 years ago
Grogyan bcd039aa81 Update pins.h 11 years ago
Grogyan 82606354dd Update temperature.cpp 
Enables both SD card and MAX6675 to talk with each other
Fixes also issue #750
 11 years ago
bonm014 32a6451ad8 Add leapfrog and dual Y/Z 
I have added the pin set for the leapfrog and the support of dual Y and Z
 11 years ago
bonm014 b5417be109 Update Configuration.h 
Leapfrog added to the board list
 11 years ago
bonm014 f244045245 Update pins.h 
Leapfrog board added to the pin list
 11 years ago
Pablo Clemente 2242a84218 Changed the declaration of the variable to Marlin_main.cpp to fix issue on commit #965 11 years ago
Neil Darlow 6e3406d228 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 11 years ago
alexborro 43c298a7a9 Add "Thermal Runaway Protection" feature 
This is a feature to protect your printer from burn up in flames if it
has a thermistor coming off place (this happened to a friend of mine
recently and motivated me writing this feature).

The issue: If a thermistor come off, it will read a lower temperature
than actual. The system will turn the heater on forever, burning up the
filament and anything
else around.

After the temperature reaches the target for the first time, this
feature will start measuring for how long the current temperature stays
below the target minus _HYSTERESIS (set_temperature -
THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).

If it stays longer than _PERIOD, it means the thermistor temperature
cannot catch up with the target, so something *may be* wrong. Then, to
be on the safe side, the system will he halt.

Bear in mind the count down will just start AFTER the first time the
thermistor temperature is over the target, so you will have no problem
if your extruder heater takes 2 minutes to hit the target on heating.
 11 years ago
Pablo Clemente d86c3cf43c Changed the type of variable to bool, the name to "cancel_heatup", flags implementation and added this fix to M190 gcode too. 11 years ago
cocktailyogi f0cab611db optimised some math-code 11 years ago
Oskar Linde 269a068032 Fix lcd itostr3() to handle negative numbers 11 years ago
cocktailyogi fae7d08698 fixed wrong compiler-option 11 years ago
cocktailyogi 512f2a3136 restore Branch from Backup 
sorry for that
 11 years ago
Pablo Clemente cd3220d055 Inverted state logic for forced_heating_stop variable 11 years ago
Pablo Clemente 86b4b805d2 Fixed stop print LCD function on M104 11 years ago
Greg Tan 6e6e4e2143 Added thermistor table for the 500C thermistor shipped with the Pico hot end. 11 years ago
Neil Darlow 9d11b70436 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 11 years ago
Gina Häußge 0de826160e M30 response is missing linefeed, "ok" therefore not on own line 
This leads to the command not being acknowledged properly
by the firmware, leading to consecutive issues in host software
waiting for an acknowledgement.
 11 years ago
Dim3nsioneer 3c927901a4 Implementation of FW extruder change retract 
FW retraction is extended onto swap retraction invoked by 'G10 S1'.
Bookkeeping of the retract state of all extruders allows for having one
extruder fw standard retracted while another extruder is swap retracted.
An LCD menu item for the swap retract and recover length was added.
 11 years ago
Dim3nsioneer 8a32c5395b renaming the disable inactive extruder feature 11 years ago
Dim3nsioneer 29e7639933 Add switch unused feeder(s) off 
Having the non-active feeder motors powered on all the time is not
necessary. A feature to deactivate the unused feeder motors has been
implemented. The feature is enabled on default but can be switched off
in the configuration.
 11 years ago
Justin Nesselrotte 07c0eeee99 Fixed a comment in the planner 11 years ago
David Forrest 09b84faa00 Configuration.h, pins.h: Add MOTHERBOARD 84 for Teensy++2.0 11 years ago
neildarlow efb6d61413 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 11 years ago
nothinman 38192cb5f3 Add M112 description to Marlin_main 11 years ago
nothinman aed5ec008a Merge pull request #851 from DanNixon/estop 
Implemented M112
 11 years ago
Erik van der Zalm cfb98ef682 More coverity fixes 11 years ago
zaubara 92e14298b0 Fixes typo for lcd backlighting on I2C PCF8575 
When using LCD_I2C_TYPE_PCF8575T (like Sainsmart I2C), the backlight
won't come on; the incorrect ifdef blocks the evocation of the backlight
functions.
 11 years ago
Erik van der Zalm 9db9842aea Fixed error found by the free coverity tool (https://scan.coverity.com/) 
===================================================
Hi,

Please find the latest report on new defect(s) introduced to ErikZalm/Marlin found with Coverity Scan.

Defect(s) Reported-by: Coverity Scan
Showing 15 of 15 defect(s)

** CID 59629:  Unchecked return value  (CHECKED_RETURN)
/Marlin_main.cpp: 2154 in process_commands()()

** CID 59630:  Operands don't affect result  (CONSTANT_EXPRESSION_RESULT)
/Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Tone.cpp: 319 in tone(unsigned char, unsigned int, unsigned long)()

** CID 59631:  Missing break in switch  (MISSING_BREAK)
/Marlin_main.cpp: 1187 in process_commands()()

** CID 59632:  Missing break in switch  (MISSING_BREAK)
/Marlin_main.cpp: 1193 in process_commands()()

** CID 59633:  Out-of-bounds write  (OVERRUN)
/temperature.cpp: 914 in disable_heater()()

** CID 59634:  Out-of-bounds write  (OVERRUN)
/temperature.cpp: 913 in disable_heater()()

** CID 59635:  Out-of-bounds read  (OVERRUN)
/temperature.cpp: 626 in analog2temp(int, unsigned char)()

** CID 59636:  Out-of-bounds read  (OVERRUN)
/temperature.cpp: 620 in analog2temp(int, unsigned char)()

** CID 59637:  Out-of-bounds write  (OVERRUN)
/temperature.cpp: 202 in PID_autotune(float, int, int)()

** CID 59638:  Out-of-bounds read  (OVERRUN)
/temperature.cpp: 214 in PID_autotune(float, int, int)()

** CID 59639:  Out-of-bounds write  (OVERRUN)
/Marlin_main.cpp: 2278 in process_commands()()

** CID 59640:  Out-of-bounds read  (OVERRUN)
/Marlin_main.cpp: 1802 in process_commands()()

** CID 59641:  Uninitialized scalar field  (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 51 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()

** CID 59642:  Uninitialized scalar field  (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 45 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()

** CID 59643:  Uninitialized scalar field  (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 32 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()

________________________________________________________________________________________________________
*** CID 59629:  Unchecked return value  (CHECKED_RETURN)
/Marlin_main.cpp: 2154 in process_commands()()
2148                 }
2149               #endif
2150             }
2151           }
2152           break;
2153         case 85: // M85
   CID 59629:  Unchecked return value  (CHECKED_RETURN)
   Calling "code_seen" without checking return value (as is done elsewhere 66 out of 67 times).
2154           code_seen('S');
2155           max_inactive_time = code_value() * 1000;
2156           break;
2157         case 92: // M92
2158           for(int8_t i=0; i < NUM_AXIS; i++)
2159           {

________________________________________________________________________________________________________
*** CID 59630:  Operands don't affect result  (CONSTANT_EXPRESSION_RESULT)
/Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Tone.cpp: 319 in tone(unsigned char, unsigned int, unsigned long)()
313         else
314         {
315           // two choices for the 16 bit timers: ck/1 or ck/64
316           ocr = F_CPU / frequency / 2 - 1;
317
318           prescalarbits = 0b001;
   CID 59630:  Operands don't affect result  (CONSTANT_EXPRESSION_RESULT)
   "ocr > 65535U" is always false regardless of the values of its operands. This occurs as the logical operand of if.
319           if (ocr > 0xffff)
320           {
321             ocr = F_CPU / frequency / 2 / 64 - 1;
322             prescalarbits = 0b011;
323           }
324

________________________________________________________________________________________________________
*** CID 59631:  Missing break in switch  (MISSING_BREAK)
/Marlin_main.cpp: 1187 in process_commands()()
1181         case 2: // G2  - CW ARC
1182           if(Stopped == false) {
1183             get_arc_coordinates();
1184             prepare_arc_move(true);
1185             return;
1186           }
   CID 59631:  Missing break in switch  (MISSING_BREAK)
   The above case falls through to this one.
1187         case 3: // G3  - CCW ARC
1188           if(Stopped == false) {
1189             get_arc_coordinates();
1190             prepare_arc_move(false);
1191             return;
1192           }

________________________________________________________________________________________________________
*** CID 59632:  Missing break in switch  (MISSING_BREAK)
/Marlin_main.cpp: 1193 in process_commands()()
1187         case 3: // G3  - CCW ARC
1188           if(Stopped == false) {
1189             get_arc_coordinates();
1190             prepare_arc_move(false);
1191             return;
1192           }
   CID 59632:  Missing break in switch  (MISSING_BREAK)
   The above case falls through to this one.
1193         case 4: // G4 dwell
1194           LCD_MESSAGEPGM(MSG_DWELL);
1195           codenum = 0;
1196           if(code_seen('P')) codenum = code_value(); // milliseconds to wait
1197           if(code_seen('S')) codenum = code_value() * 1000; // seconds to wait
1198

________________________________________________________________________________________________________
*** CID 59633:  Out-of-bounds write  (OVERRUN)
/temperature.cpp: 914 in disable_heater()()
908          WRITE(HEATER_0_PIN,LOW);
909        #endif
910       #endif
911
912       #if defined(TEMP_1_PIN) && TEMP_1_PIN > -1
913         target_temperature[1]=0;
   CID 59633:  Out-of-bounds write  (OVERRUN)
   Overrunning array "soft_pwm" of 1 bytes at byte offset 1 using index "1".
914         soft_pwm[1]=0;
915         #if defined(HEATER_1_PIN) && HEATER_1_PIN > -1
916           WRITE(HEATER_1_PIN,LOW);
917         #endif
918       #endif
919

________________________________________________________________________________________________________
*** CID 59634:  Out-of-bounds write  (OVERRUN)
/temperature.cpp: 913 in disable_heater()()
907        #if defined(HEATER_0_PIN) && HEATER_0_PIN > -1
908          WRITE(HEATER_0_PIN,LOW);
909        #endif
910       #endif
911
912       #if defined(TEMP_1_PIN) && TEMP_1_PIN > -1
   CID 59634:  Out-of-bounds write  (OVERRUN)
   Overrunning array "target_temperature" of 1 2-byte elements at element index 1 (byte offset 2) using index "1".
913         target_temperature[1]=0;
914         soft_pwm[1]=0;
915         #if defined(HEATER_1_PIN) && HEATER_1_PIN > -1
916           WRITE(HEATER_1_PIN,LOW);
917         #endif
918       #endif

________________________________________________________________________________________________________
*** CID 59635:  Out-of-bounds read  (OVERRUN)
/temperature.cpp: 626 in analog2temp(int, unsigned char)()
620       if(heater_ttbl_map[e] != NULL)
621       {
622         float celsius = 0;
623         uint8_t i;
624         short (*tt)[][2] = (short (*)[][2])(heater_ttbl_map[e]);
625
   CID 59635:  Out-of-bounds read  (OVERRUN)
   Overrunning array "heater_ttbllen_map" of 1 bytes at byte offset 1 using index "e" (which evaluates to 1).
626         for (i=1; i<heater_ttbllen_map[e]; i++)
627         {
628           if (PGM_RD_W((*tt)[i][0]) > raw)
629           {
630             celsius = PGM_RD_W((*tt)[i-1][1]) +
631               (raw - PGM_RD_W((*tt)[i-1][0])) *

________________________________________________________________________________________________________
*** CID 59636:  Out-of-bounds read  (OVERRUN)
/temperature.cpp: 620 in analog2temp(int, unsigned char)()
614         if (e == 0)
615         {
616           return 0.25 * raw;
617         }
618       #endif
619
   CID 59636:  Out-of-bounds read  (OVERRUN)
   Overrunning array "heater_ttbl_map" of 1 2-byte elements at element index 1 (byte offset 2) using index "e" (which evaluates to 1).
620       if(heater_ttbl_map[e] != NULL)
621       {
622         float celsius = 0;
623         uint8_t i;
624         short (*tt)[][2] = (short (*)[][2])(heater_ttbl_map[e]);
625

________________________________________________________________________________________________________
*** CID 59637:  Out-of-bounds write  (OVERRUN)
/temperature.cpp: 202 in PID_autotune(float, int, int)()
196       {
197          soft_pwm_bed = (MAX_BED_POWER)/2;
198          bias = d = (MAX_BED_POWER)/2;
199        }
200        else
201        {
   CID 59637:  Out-of-bounds write  (OVERRUN)
   Overrunning array "soft_pwm" of 1 bytes at byte offset 1 using index "extruder" (which evaluates to 1).
202          soft_pwm[extruder] = (PID_MAX)/2;
203          bias = d = (PID_MAX)/2;
204       }
205
206
207

________________________________________________________________________________________________________
*** CID 59638:  Out-of-bounds read  (OVERRUN)
/temperature.cpp: 214 in PID_autotune(float, int, int)()
208
209      for(;;) {
210
211         if(temp_meas_ready == true) { // temp sample ready
212           updateTemperaturesFromRawValues();
213
   CID 59638:  Out-of-bounds read  (OVERRUN)
   Overrunning array "current_temperature" of 1 4-byte elements at element index 1 (byte offset 4) using index "extruder" (which evaluates to 1).
214           input = (extruder<0)?current_temperature_bed:current_temperature[extruder];
215
216           max=max(max,input);
217           min=min(min,input);
218           if(heating == true && input > temp) {
219             if(millis() - t2 > 5000) {

________________________________________________________________________________________________________
*** CID 59639:  Out-of-bounds write  (OVERRUN)
/Marlin_main.cpp: 2278 in process_commands()()
2272               tmp_extruder = code_value();
2273               if(tmp_extruder >= EXTRUDERS) {
2274                 SERIAL_ECHO_START;
2275                 SERIAL_ECHO(MSG_M200_INVALID_EXTRUDER);
2276               }
2277             }
   CID 59639:  Out-of-bounds write  (OVERRUN)
   Overrunning array "volumetric_multiplier" of 1 4-byte elements at element index 1 (byte offset 4) using index "tmp_extruder" (which evaluates to 1).
2278             volumetric_multiplier[tmp_extruder] = 1 / area;
2279           }
2280           break;
2281         case 201: // M201
2282           for(int8_t i=0; i < NUM_AXIS; i++)
2283           {

________________________________________________________________________________________________________
*** CID 59640:  Out-of-bounds read  (OVERRUN)
/Marlin_main.cpp: 1802 in process_commands()()
1796             int pin_status = code_value();
1797             int pin_number = LED_PIN;
1798             if (code_seen('P') && pin_status >= 0 && pin_status <= 255)
1799               pin_number = code_value();
1800             for(int8_t i = 0; i < (int8_t)sizeof(sensitive_pins); i++)
1801             {
   CID 59640:  Out-of-bounds read  (OVERRUN)
   Overrunning array "sensitive_pins" of 28 2-byte elements at element index 55 (byte offset 110) using index "i" (which evaluates to 55).
1802               if (sensitive_pins[i] == pin_number)
1803               {
1804                 pin_number = -1;
1805                 break;
1806               }
1807             }

________________________________________________________________________________________________________
*** CID 59641:  Uninitialized scalar field  (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 51 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()
45     }
46
47     LiquidCrystal::LiquidCrystal(uint8_t rs,  uint8_t enable,
48     			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3)
49     {
50       init(1, rs, 255, enable, d0, d1, d2, d3, 0, 0, 0, 0);
   CID 59641:  Uninitialized scalar field  (UNINIT_CTOR)
   Non-static class member "_initialized" is not initialized in this constructor nor in any functions that it calls.
51     }
52
53     void LiquidCrystal::init(uint8_t fourbitmode, uint8_t rs, uint8_t rw, uint8_t enable,
54     			 uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
55     			 uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7)
56     {

________________________________________________________________________________________________________
*** CID 59642:  Uninitialized scalar field  (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 45 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()
39     }
40
41     LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable,
42     			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3)
43     {
44       init(1, rs, rw, enable, d0, d1, d2, d3, 0, 0, 0, 0);
   CID 59642:  Uninitialized scalar field  (UNINIT_CTOR)
   Non-static class member "_initialized" is not initialized in this constructor nor in any functions that it calls.
45     }
46
47     LiquidCrystal::LiquidCrystal(uint8_t rs,  uint8_t enable,
48     			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3)
49     {
50       init(1, rs, 255, enable, d0, d1, d2, d3, 0, 0, 0, 0);

________________________________________________________________________________________________________
*** CID 59643:  Uninitialized scalar field  (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 32 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()
26
27     LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable,
28     			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
29     			     uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7)
30     {
31       init(0, rs, rw, enable, d0, d1, d2, d3, d4, d5, d6, d7);
   CID 59643:  Uninitialized scalar field  (UNINIT_CTOR)
   Non-static class member "_initialized" is not initialized in this constructor nor in any functions that it calls.
32     }
33
34     LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t enable,
35     			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
36     			     uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7)
37     {

________________________________________________________________________________________________________
To view the defects in Coverity Scan visit, http://scan.coverity.com/projects/2224?tab=overview
 11 years ago
Neil Darlow e541323741 Merge https://github.com/ErikZalm/Marlin into Marlin_v1 11 years ago
Alejandro Romero 1c9a70cee9 Support for Gen3 Monolithic electronics 
Techzone Monotronics support, ignoring the tip manager and using fan connector as on Sprinter FW
TODO: Add support for tipmanager
 11 years ago
daid 2acd3792fc Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1 11 years ago
daid 8b4c4aa5c3 Add feature to check&retry CRC read errors on SD. 11 years ago
nothinman ce76843dc3 Merge pull request #897 from Makible/5DPrint_D8_Board_Support 
5DPrint D8 Controller Board Support
 11 years ago
Cameron Lai ad5c8cbba9 Add safety limit for hot bed power in example configuration 11 years ago
Cameron Lai 6460709d92 Fix bug in PID Autotune report 11 years ago
Cameron Lai 105bebb466 Fix for pin mapping for SDSS pin and Fan pin, so Arduino library can be used 11 years ago
Cameron Lai 97ead2eccb Fix for microstepping pin mapping, not using Teensy pin mapping, but Arduino's default pin mapping so Arduino library can be used 11 years ago
Cameron Lai d85411f13a Revert "Fix for stepper microstepping" 
This reverts commit eea3ba5588.
 11 years ago
Cameron Lai 7c7f2d094e Revert "Fix for reading microstepping resolution" 
This reverts commit 2715f6ddbf.
 11 years ago
Cameron Lai e2d703377a Enable EEPROM by default for 5DPrint D8 Controller Board in example configuration 11 years ago
Cameron Lai 2715f6ddbf Fix for reading microstepping resolution 11 years ago
Cameron Lai 39e9b133f3 Add example configuration for Makibox printer, which uses the 5DPrint D8 Driver Board 11 years ago
Cameron Lai da6b536182 Add 5DPrint D8 Driver Board info and temperature table for Makibox hot bed 11 years ago
Cameron Lai 3a8e36f19e Add Digipot config for 5DPrint D8 Driver Board 11 years ago
Cameron Lai eea3ba5588 Fix for stepper microstepping 11 years ago
Cameron Lai 1cbcbb0971 Add makibox machine information 11 years ago
Cameron Lai 2fa514e88a Add port for 5DPrint D8 Driver board 11 years ago
nothinman b9126ab497 Merge pull request #894 from MyMakibox/Marlin_v1 
Update Marlin_main.cpp
 11 years ago
MyMakibox 21ec6b88c3 Update Marlin_main.cpp 
Added description of autotemp flags to M109
 11 years ago
MyMakibox e4dc80d3d3 Update Configuration_adv.h 
Corrected error in AUTOTEMP instructions
 11 years ago
Neil Darlow 6adbdf42e0 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 11 years ago
whosawhatsis 27d544ac25 Speed up QUICK_HOME feedrate for diagonal move 
Speed up the diagonal move while still keeping each individual axis at
or below its homing feedrate.
 11 years ago
nothinman 013793bbe9 Merge pull request #878 from koldoartola/Marlin_v1 
Added new language (Basque-Euskera)
 11 years ago
koldo artola e5b70237c7 Added new language (Basque-Euskera) 
Added:
* new language (Basque-Euskera)
* some minor corrections for Spanish
* added 2 new constants for every language (required for a minor change
I am preparing to ultralcd.cpp)
 11 years ago
Nutz95 ed6f4a71c5 fix wrong temptable index 11 years ago
Nutz95 3161740df9 This table is made for thermistor 3950 (can be found on ebay for cheap) 
it's caracteristics are :

R25℃ ;100KΩ±1%

B Value(R25/50℃)：3990K 1%
Dissipation Factor(mW/℃)：1.1~1.6 In still Air
Thermal Time Constant(S)：10~17 In Still Air
Operating temperature range：  (-50~+260°C)
Dimension：  1.8mm Dia X4.1mm
Lead Length  ：30mm

This table was found on the following blogs:
http://cae2100.wordpress.com/2014/03/08/beta3950-thermistor-table-for-marlin/

and

http://microfabricator.com/articles/view/id/531ad7e59aad9d3131000000/beta-3950-thermistor-table-for-marlin
 11 years ago
nothinman 086ff1644f Merge pull request #852 from pixatintes/patch-1 
Update language.h
 11 years ago
nothinman 3ffc9651b1 Merge pull request #845 from DerSchultze/Sanguinololu-servo 
Added servo pin assignments to Sanguinololu
 11 years ago
nothinman 357b87b498 Merge pull request #826 from paciotti/patch-1 
Configuration_adv.h
 11 years ago
neildarlow 95ad6ec9a1 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 11 years ago
Gabe Rosenhouse 27a7cf9fcf use existing strings 11 years ago
Gabe Rosenhouse d3f305332a Allowable range now includes default value 11 years ago
Gabe Rosenhouse b0aeac117f Adjustable Z probe offset, via custom M-code 11 years ago
Neil Darlow 73b380d8d2 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 11 years ago
nothinman c23376f2e7 Merge pull request #837 from whosawhatsis/fwretract 
FWRETRACT in mm/s
 11 years ago
nothinman dfb98101e4 Change CONTROLLERFAN_PIN for board 35 to -1, as it would conflict with board's 33 extruder pin, causing burnout (it's the same board, just different number of fans/extruders, therefore should be pin-compatible) 11 years ago
nothinman f1501317ca Merge pull request #860 from drf5n/therm3950 
thermistortables.h: Add comments that table 60 uses beta=3950.
 11 years ago
nothinman 9a5d23d96f Merge pull request #866 from sakunamary/Marlin_v1 
fix bug for dual extruders not working
 11 years ago
nothinman 303ee67896 Merge pull request #864 from whosawhatsis/M200 
fix bug in M200 with multiple extruders
 11 years ago
Tim 8759508319 fix bug for dual extruders not working 
some guy find that marlin not working good for dual extruders delta .
when type T0 or T1 to active extruder and  E0 or E1  move causing XYZ
motion . so i locales the bugs and fix it , I have dry run the fix.
 11 years ago
whosawhatsis a65564eef6 fix bug in M200 with multiple extruders 11 years ago
whosawhatsis aeaf9b9312 fix bug in M200 with multiple extruders 11 years ago
Neil Darlow 89f78b0b80 Allow use of either SD Card slot when LCD Panel is configured. 
Preference is for Controller SD slot before LCD Panel slot when both are occupied.
 11 years ago
David Forrest b0093a1513 thermistortables.h: Add comments that table 60 uses beta=3950. 11 years ago
pixatintes a3530d1141 Update language.h 
Updated to latest version.
 11 years ago
pixatintes 990e770e15 Update language.h 
Added catalan language
 11 years ago
Dan Nixon f643f4d674 Test and refactor 11 years ago
neildarlow bbe8fbe13d Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 11 years ago
Dim3nsioneer c8cdd1fc6f Bugfixes for language option 6 (russian) 11 years ago
Dim3nsioneer 7395dafc1e semantic changes in language.h 11 years ago
Dim3nsioneer fad2a60ce6 Corrections for preheat extension in language.h 11 years ago
Ralf Schultz eecda434fb Sanguinololu servo pins set default disabled 11 years ago
Dim3nsioneer 944ced87c5 Extended Preheat options 
Preheat LCD menus base on code by D-Base
 11 years ago
Ralf Schultz 06709ad60e Added servo pin assignments to Sanguinololu 11 years ago
Dim3nsioneer 3906f27c46 Individual extruder flow rate 
Extension of M221, Tune menu
 11 years ago
Dan Nixon a38c90ee84 Added estop handling 11 years ago
ErikZalm a00cec8b71 Merge pull request #833 from mattsch/optional_feedrate_multiplier 
Add support for disabling encoder control for feedrate multiplier
 11 years ago
neildarlow af8be9013b Merge branch 'lcd_detected' of https://github.com/whosawhatsis/Marlin into Marlin_v1 11 years ago
whosawhatsis 0ddee3c7db Prevent SD card insertion from causing a hang when using LiquidTWI2 device detection 11 years ago
Dan Nixon 272072fa20 Added M112 11 years ago
whosawhatsis aab61e63c3 FWRETRACT in mm/s 
Firmware retraction now stores the retract and recover speeds in mm/s
instead of mm/min. This makes it match the units of the maximum
feedrate, and fixes problems with modifying the value via LCD control
panel. From gcode, the values are still taken in mm/min to match the
units of G1 and similar, and they are converted to mm/s before they are
stored.

I also lowered the default retract feedrate to make it less likely to
cause problems for geared extruders when the user hasn’t bothered to
set a reasonable maximum feedrate, though users should be setting both
of these values to suit their hardware.
 11 years ago
Matthew Schick 6cd85e6008 Add support for disabling encoder control for feedrate multiplier 
Signed-off-by: Matthew Schick <matthew.schick@gmail.com>
 11 years ago
blddk 09af1b90b8 Added CHDK support 
Added CHDK support to take pictures instead of doing an IR command, see more about how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
 11 years ago
blddk 765b2da3d4 Added CHDK support 
Added so M240 can be used to trigger CHDK instead of sending an IR signal, see more about CHDK here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
 11 years ago
paciotti 881e348eed Update Configuration_adv.h 
Increase Z_HOME_RETRACT_MM to 2mm default to avoid end stop not switching during retract.
 11 years ago
neildarlow 5a332df47e Merge https://github.com/ErikZalm/Marlin into Marlin_v1 11 years ago
Tommi Lamberg 15d1b8d719 Fixed finnish translation 
- Fixed Few finnish transalations
- Removed duplicate contrast define
 11 years ago
neildarlow 7325d7102e Activate LiquidTWI2 device detection and space-pad LCD status line. 11 years ago
ErikZalm 7f76a0e064 Merge pull request #813 from drf5n/PID_DEBUG 
temperature.cpp: Fix PID_DEBUG compile error.
 11 years ago
Erik van der Zalm fcd8524b6e Only increase EEPROM version for DELTA printers. 11 years ago
Jim Morris 8ea5665ee2 Merge remote-tracking branch 'origin/Marlin_v1' into add/M665-set-delta-configuration 
Conflicts:
	Marlin/Marlin_main.cpp
 11 years ago
David Forrest 8c4377dd63 temperature.cpp: Fix PID_DEBUG compile error. 11 years ago
ErikZalm fde8c2c310 Merge pull request #807 from Cylindric3D/typofixes_upstream5 
Various typo fixes #5 - only in comments, no code changes.
 11 years ago
Cylindric fdce91192e Various typo fixes - only in comments, no code changes. 11 years ago
Cylindric d819c55395 Various typo fixes - only in comments, no code changes. 11 years ago
ErikZalm fd4542f33a Merge pull request #805 from whosawhatsis/M200 
autretract fix
 11 years ago
ErikZalm e8291ed728 Merge pull request #802 from Makers-Tool-Works/Marlin_v1 
Clarify which PID values to enter
 11 years ago
ErikZalm 465b654d24 Merge pull request #797 from Cylindric3D/update_menu_plan 
Update menu plan
 11 years ago
ErikZalm 88506a80c3 Merge pull request #789 from smiler/Marlin_v1 
Fixed typo.
 11 years ago
ErikZalm b514d3c87f Merge pull request #781 from Cylindric3D/typofixes_upstream 
Various typo fixes #3 - only in comments, no code changes.
 11 years ago
whosawhatsis 77df0d689a autretract fix 
I made these changes previously, but I can’t find the commit now. This
reapplies the changes to get auto retract working again.

Conflicts:
	Marlin/Configuration_adv.h
	Marlin/Marlin_main.cpp
 11 years ago
ErikZalm cc5f1d475c Merge pull request #772 from ellensp/Marlin_v1 
Updated gen3+ board pins names to current convention
 11 years ago
Cylindric 91759dede6 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into typofixes_upstream 11 years ago
Cylindric 557217fc05 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into update_menu_plan 11 years ago
RoyOnWheels aee63afccd Clarify which PID values to enter 
Users can be confused as to which values to enter after a PID tune. Updating the message to help clarity it.
New message: "PID Autotune finished! Put the last Kp, Ki and Kd constants from above into Configuration.h"

Old message: "PID Autotune finished! Put the Kp, Ki and Kd constants into Configuration.h"
 11 years ago
Gabe Rosenhouse 99f6326544 Remove unnecessary dependency on time.h from qr_solve.cpp 
Fixed compiler errors on Ubuntu using arduino-core
 11 years ago
Cylindric ea669cb504 Fix some extra and some missing tabs, to make the file consistent. 11 years ago
Cylindric b46a1b6360 Update the menu plan document with the current menu as per ultralcd.cpp. 11 years ago
Cylindric 3cc7626d1f Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into update_menu_plan 11 years ago
Gabe Rosenhouse 174b8d99d5 Simplify 3-point probing using new code only 11 years ago
Gabe Rosenhouse 3b718b816c better documentation 11 years ago
Gabe Rosenhouse 34fd59c370 ABL at any points 11 years ago
Cylindric 541155ea87 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into typofixes_upstream 11 years ago
alexborro 9fa328e5c8 Merge pull request #793 from MissionSt/use_axis_enums 
Use constants instead of numeric literals
 11 years ago
Gabe Rosenhouse f308a8af91 update comment 11 years ago
Gabe Rosenhouse 357e31270a Prevent G29 without first homing in X and Y 
If position is unknown, then G29 can be dangerous.
 11 years ago
Gabe Rosenhouse d2d7d186b5 Use descriptive constants, more 11 years ago
Gabe Rosenhouse 2ccdf4f36d Use descriptive constants instead of numeric literals 11 years ago
Christian Axelsson c00383f286 Fixed typo. 11 years ago
Cylindric 60f72a78a9 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into typofixes_upstream 11 years ago
nothinman abba7a0003 Merge pull request #782 from marcovannoord/Marlin_v1 
Added dutch to language.h
 11 years ago
Cylindric b868d668fa Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into typofixes_upstream 11 years ago
Marco 8212d8d543 Revert "Fixed small typo that would prevent compiling" 
This reverts commit 51ae4881ab.
 11 years ago
daid 46bae30573 Merge pull request #776 from whosawhatsis/fwretract 
Fwretract fixes, cleanup
 11 years ago
Marco 51ae4881ab Fixed small typo that would prevent compiling 11 years ago
Marco 498d76fd79 Fixed some messages where the text shown on the screen was more than 17 characters 11 years ago
Jim Morris af9395ac2e Add M605 to dynamically set delta configuration 
Save above configs in eeprom
fix docs in createTemperatureLookupMarlin.py
add missing azteegX3pro digipot settings in delta example config
 11 years ago
nothinman fd42f0d226 Merge pull request #783 from MissionSt/fix/syntax-error 
Fix compile error
 11 years ago
nothinman 96217bf36a Merge pull request #777 from PxT/M114 
Add whitespace to M114 output
 11 years ago
Marco cf5c3b6610 Added dutch to language.h 11 years ago
Gabe Rosenhouse d1c64b9dc4 Fix syntax error introduced in 477b6fa1d 11 years ago
Cylindric 5d50819791 Various typo fixes - only in comments, no code changes. 11 years ago
nothinman 3f455889d0 Merge pull request #769 from Cylindric3D/typofixes_1 
Various typo fixes - only in comments, no code changes.
 11 years ago
nothinman 4ddedb3b27 Merge pull request #780 from Cylindric3D/typofixes_2 
Various typo fixes #2 - only in comments, no code changes.
 11 years ago
nothinman d4ba23bc28 Merge pull request #770 from josefpavlik/Marlin_v1 
Marlin v1
 11 years ago
nothinman bbb424bd2f Merge pull request #779 from MissionSt/makefile-fix-abl 
Makefile fixes
 11 years ago
Cylindric 8f0cee2a14 Various typo fixes - only in comments, no code changes. 11 years ago
Cylindric 08263ae66e Merge branch 'Marlin_v1' into typofixes_1 11 years ago
Gabe Rosenhouse 5bd09d26e2 Makefile works with auto bed leveling 11 years ago
Gabe Rosenhouse b45beeffd6 typo fix in Makefile 11 years ago
Paul Telford 306588925d Add whitespace to M114 output 11 years ago
whosawhatsis c43838bb1e disable auto retract by default 
This should make it safe to enable FWRETRACT by default, with
autoretract (which should now be fixed) only enabled by M209. FWRETRACT
should probably now default to enabled (to make G10/G11 and M207-209
available, without changing functionality when they are not used), but
I’ll save that for another pull request/discussion.
 11 years ago
whosawhatsis 99f0e44864 Move FWRETRACT defaults to configuration_adv.h 11 years ago
whosawhatsis 66e3869138 Fix autoretract 
This takes the (now working) G10/G11 code and moves it to a function,
which is called by G10 and G11, and also called by G1 if autoretract is
enabled and a retract/recover move is detected.
 11 years ago
whosawhatsis 2f2459c0db Fix G10/G11 Z-lift 11 years ago
Gabe Rosenhouse 8c5675c290 Use language.h instead of English literals for "bed" 11 years ago
Gabe Rosenhouse 0f7393a13e Refactor 'accurate' auto bed leveling to use probe_pt() 11 years ago
Gabe Rosenhouse c4fbb44d6d Refactor 3-point auto bed leveling to use probe_pt() 11 years ago
Gabe Rosenhouse ad2c6488c7 Add probe_pt(), useful for auto bed leveling 11 years ago
Peter c9c83a4560 Updated gen3+ board pins names to current convention 11 years ago
Mark Hanford ab0d3c4fb3 Various typo fixes - only in comments, no code changes. 11 years ago
Josef Pavlik 477b6fa1df move engaged from lcd console refreshes power off timeout 11 years ago
Josef Pavlik 831fc2a952 Pt100 and Pt1000 temperature sensors handling 11 years ago
nothinman 7dcd350941 A few changes to Russian, changed LCD strings to be <=17 characters. 11 years ago
daid c31bb2b7ad Only show the ZProbe offset when auto-bed-leveling is enabled. 11 years ago
daid 46f5bea19f Add configurable beep for UltiPanel. 11 years ago
daid d16a770855 Ultimainboard 2.x does not has a PS_ON pin. 11 years ago
daid 71bb3a8133 Add comments for Ultimainboard 2.0 configuration. 11 years ago
daid 9b7d87e885 Remove duplicate contrast define. 11 years ago
daid 816f0a678a Merge pull request #768 from whosawhatsis/Marlin_v1 
multiple FWretract fixes
 11 years ago
whosawhatsis 6e43398509 G10/G11 bugfixes 
Previous version was broken by using G92 E0 between retract and recover.
 11 years ago
whosawhatsis d6c5c503d4 correct feedrate units in comments for M207/M208 11 years ago
nothinman 15d6116188 Merge pull request #689 from cajun-rat/tidy 
Use C++ initialization list
 11 years ago
Martin Lukasik 0b9ecf3824 Language cleanup, part 1. 11 years ago
whosawhatsis b5ba5c1465 Merge branch 'Marlin_v1' of https://github.com/whosawhatsis/Marlin into Marlin_v1 11 years ago
whosawhatsis 78e7654601 Keep FWRETRACT values in terms of millimeters when using M200 
for volumetric E units
 11 years ago
whosawhatsis 3f6d44d40b Keep FWRETRACT values in terms of millimeters when using M200 for volumetric E units 11 years ago
Cylindric 363dc2f0e8 Merge branch 'Marlin_v1' into update_menu_plan 11 years ago
nothinman 5f797ca29f Updated Polish, changed default firmware URL to Marlin. 11 years ago
Mark Hanford 0778f5f028 Add missing entries to the new Aragonian language. 11 years ago
Mark Hanford 54bab3e0d0 Merge branch 'Marlin_v1' into localisation 
Conflicts:
	Marlin/language.h
 11 years ago
Mark Hanford bdd0211aeb Move strings in ultralcd.cpp into language.h. 11 years ago
Daniel Martinez c8e5a82d49 keep English as default lang. 11 years ago
Daniel Martinez f64592e362 Add Aragonese translation 11 years ago
ErikZalm ac74f45dc0 Merge pull request #752 from MatixYo/patch-3 
Update language.h
 11 years ago
MatixYo 36086d3ca4 Update language.h 
Updated Polish translations.
 11 years ago
Cylindric 1781031f2d Update LCD Menu Tree with current options, based on ultralcd.cpp and language.h. 11 years ago
Jim Morris d485988bec fix typo 11 years ago
Jim Morris 8a1fd25363 Default is to not define digipot_i2c 11 years ago
Jim Morris 5097c57d3a Added pins for Azteeg X3 Pro under motherboard 68 11 years ago
Jim Morris b819fc53ca Add Azteeg X3 Pro as motherboard 68 
Add digipot i2c control for MCP4451
Allow M907 to set i2c digipot currents in amps
Fix Makefile to allow Azteeg motherboards
Fix Makefile to allow Wire libraries only
Add beeper pin for Azteeg X3 Pro
 11 years ago
ErikZalm e1ae7952eb Merge pull request #743 from Opticalworm/Marlin_v1 
Improved support for panelolu2 encoder and buzzer
 11 years ago
David Forrest a5f53f0cf3 Heater wattage reporting for M105 using EXTRUDER_WATTS and BED_WATTS 11 years ago
Ronald 8d162e5bd7 Improved support for panelolu2 encoder and buzzer 
I added #define for LCD_FEEDBACK_FREQUENCY_HZ and
LCD_FEEDBACK_FREQUENCY_DURATION_MS  which is used to alter the default
buzzer sound.

When selecting Panelolu2 in configuration.h:
- it automatically sets the correct ENCODER_PULSES_PER_STEP and
ENCODER_STEPS_PER_MENU_ITEM.
- if LCD_USE_I2C_BUZZER is defined it will also set the default
LCD_FEEDBACK_FREQUENCY_HZ and LCD_FEEDBACK_FREQUENCY_DURATION_MS

When selecting the sanguinololu 1284p the following is true:
- its now enables  LARGE_FLASH
- It enables the gcode M300 when the panelolu2 LCD_USE_I2C_BUZZER is
defined
 11 years ago
whosawhatsis b2c11ba980 Change diameter code to 'D' 
For some reason that I can’t figure out, the decimal is dropped when
using ’S’ for the code.

Also some minor code improvements to M200.
 11 years ago
ErikZalm 61059385a3 Merge pull request #737 from whosawhatsis/M200 
M200 implementation
 11 years ago
whosawhatsis 856edfcc0d Fixed math 
This is why I wanted to sleep on the code I wrote while falling asleep
rather than immediately submitting a pull request.
 11 years ago
ErikZalm 0d81ae77bc Merge pull request #727 from drf5n/oversampling 
temperature.cpp: Actually use OVERSAMPLENR in the oversampling calculation.
 11 years ago
ErikZalm 84df13f7d1 Merge pull request #721 from drf5n/lcdOnly 
Enable basic ULTRA_LCD screen w/o encoders and menus.
 11 years ago
ErikZalm 4c7e9502ad Merge pull request #718 from drf5n/temptableRes 
createTemperatureLookupMarlin.py: Add resolution comments and format for...
 11 years ago
ErikZalm 652a0f6b5a Merge pull request #717 from drf5n/tpins2 
fastio.h: Add AT90USBxx_TEENSYPP_ASSIGNMENTS for teensyduino/Lincomatic/...
 11 years ago
ErikZalm 96a0cdc541 Merge pull request #716 from drf5n/maketeensy 
Makefile: Update for Arduino 1.0.5 and Teensyduino dependent boards (HAR...
 11 years ago
whosawhatsis d24df7af2c M200 implementation 11 years ago
David Forrest f0b8d5ba3d createTemperatureLookupMarlin.py: Change comment to refer to actual program name. 11 years ago
David Forrest 50f44d9249 createTemperatureLookupMarlin.py: Truncate to short after application of OVERSAMPLENR for improved resolution. 11 years ago
David Forrest f5b5dd8038 createTemperatureLookupMarlin.py: Add output of Steinhart-Hart coefficients. 11 years ago
David Forrest 76cf07c3f7 Configuration.h: Use OVERSAMPLENR in dT_PID definition. 11 years ago
David Forrest 476c7193d8 temperature.cpp: Use OVERSAMPLENR in oversampling calculation. 11 years ago
whosawhatsis f08bb8bb6a Previous commit borked. 11 years ago
whosawhatsis b1f8f492c6 Remove previous_millis_cmd update from extruder runout prevention code 
This seems to defeat the purpose of previous_millis_cmd, preventing the
time elapsed from previous_millis_cmd from ever reaching
max_inactive_time or stepper_inactive_time while the heat was on.
 11 years ago
whosawhatsis 8a5eaa3c9b Fix crash after home bug 
Fixes a bug in the Extruder Runout Prevention feature that caused the
extruder to move back to “current_position” after a move if it was
activated while the move was in progress. For long home moves (which
are longer than the dimensions of the machine’s working area), this
would cause the machine to crash into the far end of its travel after
homing. This usually occurred on the Z axis, which could result in
damage to the machine if you don’t hit the reset button in time.
 11 years ago
David Forrest 61a7256d42 Enable basic ULTRA_LCD screen w/o encoders and menus. 11 years ago
l.lefebvre fdac8f6cec Update ConfigurationStore.cpp 
Unable to compile if ENABLE_AUTO_BED_LEVELING is not set (not set by default).
 11 years ago
Alex Borro 05932e4458 Add Z Probe Offset to EEPROM and Ultra LCD 11 years ago
David Forrest 7216583b8b createTemperatureLookupMarlin.py: Add resolution comments and format for Marlin. 11 years ago
David Forrest e8e0697e48 fastio.h: Add AT90USBxx_TEENSYPP_ASSIGNMENTS for teensyduino/Lincomatic/Printrboard compatibility. 11 years ago
David Forrest 75f39fadfc Makefile: Update for Arduino 1.0.5 and Teensyduino dependent boards (HARDWARE_MOTHERBOARD=={8,81,82,83,84}) 11 years ago
daid df194f75e1 Added PT100 support for Ultiboard2 11 years ago
daid 380144c20f Add Ultiboard2 electronics. With PWM current settings. For the few people that have this new board as experiment in their UM-Original. 11 years ago
fsantini 6ae7f7870d Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into ErikZalm 
Conflicts:
	Marlin/Configuration.h
	Marlin/Marlin_main.cpp
 11 years ago
Phil Wise 17d6d965dc Use C++ initialization list 
This is the recommended approach for object initialization. The change
doesn't affect binary size (although in theory it could make it smaller).
 11 years ago
Joseivaldo Benito Junior ce8b9c4fc5 Correct missing parameter from last upmerge 
Signed-off-by: Joseivaldo Benito Junior <jrbenito@benito.qsl.br>
 11 years ago
Joseivaldo Benito Junior 8e48e24c7f Update Delta example files 
Signed-off-by: Joseivaldo Benito Junior <jrbenito@benito.qsl.br>
 11 years ago
ErikZalm 46d2443c7d Merge pull request #676 from IVI053/Marlin_v1 
Minor improvements for encoder configuration, LCD entry for PSU controll and thermistor pins on RAMPS
 11 years ago
- eed053dffb Revert "Made numbering of heat bed thermistor more logical as D8 is bed, D9 is Extruder 2 and D10 is Extruder 1, so T0 should be E1, T1 E1 and T2 bed to be sequential as MOSFET-Outputs" 
This reverts commit b7eadb9f37.
 11 years ago
Erik van der Zalm 8349fc89a4 Fixed planner bug 11 years ago
Francesco Santini da2a6f9a31 Accurate bed leveling: x loop inside y and zigzag motion 11 years ago
RicardoGA d29615dc0c Z and Y dual stepper drivers error 
if you try to enable Z_DUAL_STEPPER_DRIVERS the error "You cannot have dual drivers for both Y and Z" shows even if you don't have defined Y_DUAL_STEPPER_DRIVERS and don't let you compile the firmware

to solve this problem i change this line:

#ifdef Z_DUAL_STEPPER_DRIVERS && Y_DUAL_STEPPER_DRIVERS

to:

#if defined (Z_DUAL_STEPPER_DRIVERS) && defined (Y_DUAL_STEPPER_DRIVERS)

now the error only show if you define both Z_DUAL_STEPPER_DRIVERS and Y_DUAL_STEPPER_DRIVERS
 11 years ago
fsantini 5bde7fcb28 Minor code and comment polishing 11 years ago
- 20faff5935 Incorporate PS_DEFAULT_OFF for starting state on LCD menu entry 11 years ago
- e5d3044801 Added posibility to set ENCODER_STEPS_PER_MENU_ITEM in Configuration.h like ENCODER_PULSES_PER_STEP as it depends on it for usability 11 years ago