7870 Commits (57b61491d3c901d9ad13c2fc052180c0b38f6a45)

Author SHA1 Message Date
Bob-the-Kuhn 7d8b66e207
Merge pull request #8570 from Bob-the-Kuhn/Sbase-PWM
[2.0.x] MKS Sbase - add servo pin definitions and add directly controlled PWM
7 years ago
Bob-the-Kuhn 59b32c25b5 MKS Sbase changes 7 years ago
Scott Lahteine f90c075d1f SD Menu patches 7 years ago
Scott Lahteine 9b64be0bc5 Fixes for leveling sub-menus 7 years ago
Scott Lahteine 25674da90c Tweaks to do_blocking_move 7 years ago
Scott Lahteine 22b897e77d Show M211 output with workspace offset 7 years ago
Scott Lahteine d06e29846d Loosen HAS_BED_PROBE definition 7 years ago
Roxy-3D e48fcad615 change G26 and G29 bit function names to avoid HAL collision 7 years ago
Scott Lahteine 41ec449960 Fix G26 error return 7 years ago
Scott Lahteine 9badf5dc0d Fix Micromake C1 config 7 years ago
Scott Lahteine 7576ad7fc2
Merge pull request #8554 from tcm0116/2.0.x-cleanup
[2.0.x] Fix for #8525 and other cleanup
7 years ago
Scott Lahteine 27c5692b13 Syntax tweaks 7 years ago
Scott Lahteine d18d40e1d6 M290 report on change, P0 to leave Probe Z Offset alone 7 years ago
LVD-AC 65f365333f [2.0.x] G33 probe error handling 7 years ago
Bob-the-Kuhn 8c69adba8b
Merge pull request #8553 from Bob-the-Kuhn/2.0.x-U8Glib-follow-up
[2.0.X] U8Glib follow up
7 years ago
Scott Lahteine be00e421a7 Patch up M290, M851 7 years ago
Bob-the-Kuhn fc40d56131 fixed error, updated defaults, added notes
Travis fix - only allow ultralcd_st7920_u8glib_rrd_AVR.cpp to compile when ST7920 selected
7 years ago
Roxy-3D d29cb646e3
Fix erroneous reference to temperature in time calculations
Travis is having problems at:  https://github.com/MarlinFirmware/Marlin/pull/8560   

So...   doing a direct commit to get things correct.   Bugfix_v1.1.x does not have this bug.  Nothing needs to be done to that branch.
7 years ago
Thomas Moore 7bb1721f35 Fix _BV already defined warnings for Teensy 7 years ago
Thomas Moore 5f9592a523 Cleanup narrowing warning in pin_is_protected 7 years ago
Thomas Moore 34eaaab5fb Fix _BV already defined warnings 7 years ago
Thomas Moore 2ea779e560 Allow bed probe sanity checks to run 7 years ago
Scott Lahteine d24b1190bd Don't use Z_MIN_PROBE_ENDSTOP on DELTA 7 years ago
Scott Lahteine e34c6827ea Init MIXING virtual tools as switching 7 years ago
Scott Lahteine a9ecb975b2 Apply LINEAR_UNIT to M503 output for M200 7 years ago
Scott Lahteine d95ee0f003
Merge pull request #8551 from revilor/bugfix-2.0.x
MK2_MULTIPLEXER does not require E2/E3 stepper pins
7 years ago
Scott Lahteine 80ada58818 One fewer function call in probe_pt 7 years ago
oliver 92a0dc552a MK2_MULTIPLEXER does not require E2/E3 stepper pins 7 years ago
Scott Lahteine b49acce035 Tweaks for lcd_external_control 7 years ago
Scott Lahteine 1ef1052ae1 Phatter arrows for Z offset overlay 7 years ago
Scott Lahteine 5926c9c97b Followup for MESH_EDIT_GFX_OVERLAY 7 years ago
Scott Lahteine ab03a31cc9 Patch G0/G1 for NANODLP_Z_SYNC 7 years ago
Scott Lahteine a766dfb3b1
Merge pull request #8536 from thinkyhead/bf2_nanodlp_z_move_sync
[2.0.x] Implement NANODLP_Z_SYNC for 2.0.x
7 years ago
Scott Lahteine 01e207213f Fix MK2_MULTIPLEXER stepper indirection 7 years ago
Roxy-3D ec04cf27d3
Fix the G26 out of scope identifiers in the v2.0.0 branch (#8543)
These changes may need to be warmed over.  I tried to fix things with
the least amount of disruption.   I just wanted to get the bugfix_v2.0.0
branch working for people again.
7 years ago
Scott Lahteine dc82babe8e Implement NANODLP_Z_SYNC for 2.0.x 7 years ago
Scott Lahteine c6b0c104bb Adapt G26 to work for all meshes 7 years ago
Scott Lahteine 5ce7f23afa Config option G26_MESH_VALIDATION for all meshes 7 years ago
Scott Lahteine c19eb33408 Move G26 to gcode sub-folder 7 years ago
Scott Lahteine a03f93bab4 Fix fan kickstart 7 years ago
Scott Lahteine 9e3c41f9e8 Tweak fan kickstart / speed code 7 years ago
GMagician 118ac61e59 [2.0.x] Tool change bad behaviour fix
Previous fix did not work as expected when axeis not homed. It raise Z but never return to original position
7 years ago
Scott Lahteine c35d27f77c
Merge pull request #8299 from tcm0116/2.0.x-BIQU_BQ111-A4
[2.0.x] Add BIQU BQ111-A4 board
7 years ago
Scott Lahteine 1685cd193b Tweak char_mode init 7 years ago
Scott Lahteine 9406c87a97 Fix up LCD init / charset 7 years ago
Thomas Moore fa577392b2 Add BIQU BQ111-A4 board 7 years ago
Scott Lahteine c2fc78c3a8 #ifndef => #if !PIN_EXISTS 7 years ago
Scott Lahteine c613a1ed38 Fix indentation, stepper.h dependency, etc. 7 years ago
teemuatlut f011a32771 Board definitions for Ultratronics Pro v1.0 7 years ago
Bob-the-Kuhn 9dad534f02 fixed 7 years ago
Scott Lahteine 4371345cbe
Don't re-init graphical LCD after boot screen
Followup to 13a3fb1acc
7 years ago
Scott Lahteine 56c02b7f59 Shift register buttons question
Can LCD shift registers keep up with faster MCUs?
7 years ago
Scott Lahteine 3994d3b935 General cosmetic LCD 7 years ago
Scott Lahteine 617993d0ea Patch for !!TEST (was _BV once?) 7 years ago
Scott Lahteine 3269d8dd62 Tweak M42 var 7 years ago
Mateusz Krawczuk bb1a6eea88
Remove pin count check for MIGTHYBOARD_REVE
Remove assert and unused code since it is implemented in pinsDebug_plus_70.h
7 years ago
Scott Lahteine 1ce0fb336b Patch Max7219_LED_Set input args 7 years ago
GMagician a61127a421 [2.0.x] tool change bad behaviours
This will solve 2 issues on tool change.
1) when no home is done ("no_move" is set) tool change should never move X & Y because... I don't know where I am...only Z should be adjusted to avoid bed collision if other nozzle is lower than current.
Since no move no bed level matrix should be applied
2) When SWITCHING_NOZZLE is enabled and system is homed there are two movements to go to destination, but first can move Z to older position and then crash on the bed
7 years ago
Vitaliy Sapyanov e2724c68ab Update pins_RURAMPS4D.h
Add and bugfix pins
7 years ago
Scott Lahteine 9770062309
Merge pull request #8463 from thinkyhead/bf2_32bit_M42
[2.0.x] Updates to Anet A8 configurations
7 years ago
Scott Lahteine 3066655727 Try port*100+pin, fix config dependency 7 years ago
Scott Lahteine ba8bc7ea80 Cosmetic tweaks 7 years ago
Scott Lahteine f409147116 Fix P2_04, P2_05 7 years ago
Bob-the-Kuhn a28ccabe2a M42 P1.20 fix 7 years ago
Unknown 33912fa7e8 Update Temperature::setPwmFrequency prototype to match source
Introduced with #8446
7 years ago
Scott Lahteine b9327a4d16 Misc. general cleanup 7 years ago
Scott Lahteine 8836623e0f Fix `sq`/`min`/`max` macros after platform headers 7 years ago
Scott Lahteine fe4f009fdd 32-bit unless… 7 years ago
Scott Lahteine 25af9decfe Remove enum.h include of MarlinConfig.h 7 years ago
Scott Lahteine 1d4571b88d Dependency adjustments 7 years ago
Scott Lahteine 550f1025f0 Try using <Arduino.h> everywhere 7 years ago
Scott Lahteine c0000a0cdc Move servo code to modules/servo.* 7 years ago
Scott Lahteine 81bc428b48 Don't compile custom u8g without DOGLCD 7 years ago
Bob-the-Kuhn c14000775b PWM fixes, slow down fan update
include LPC1768 syntax for M42

couple more pin_t changes

consistency

change M42 to R, P format

Revert "change M42 to R, P format"

This reverts commit 01f12f579ec9ccc1bb9126e68d2c86449e9b7edf.
7 years ago
Scott Lahteine 60adc6ff02 Display filwidth ratio in terms of E mm 7 years ago
Scott Lahteine 6e533748eb Fixes #8472 7 years ago
Scott Lahteine 485abb023b
Merge pull request #8456 from thinkyhead/bf2_wednesday_tweaks
[2.0] No retroactive adjustment with M851 Z
7 years ago
Scott Lahteine 3bba7d60f3 No retroactive changes with M851 Z
If using babystep to adjust the Z probe offset, the axis will move and the mesh will be updated at the same time, causing a doubling of the Z offset over the rest of the print.

To correct for this, the current Z position would need to be modified in the opposite direction, canceling out the additional Z offset added to the mesh. This would be confusing to users, and moreover it would not be accurate without also taking the current Z fade level and current Z height into account.

It might make sense to change the mesh in the case where no babystepping is taking place, but this could be considered an undesirable side-effect of changing the `zprobe_zoffset`.

One way to remedy this would be to return to storing the mesh with `zprobe_zoffset` included, then subtracting `zprobe_zoffset` from the returned Z value. Thus, a babystep moving the Z axis up 1mm would subtract 1 from `zprobe_zoffset` while adding 1 to all mesh Z values.

Without including the `zprobe_zoffset` in the `z_values` there is no safe way to alter the mesh in conjunction with babystepping, although it's fine without it.
7 years ago
Scott Lahteine 32512332df Apply some formatting 7 years ago
Scott Lahteine 7dacc999b9 Remove obsolete show_bootscreen var 7 years ago
Roxy-3D 9729528d13
Update UBL's Delta Probable locations
This is a non-intuitive change.   @oldmcg says in this post https://github.com/MarlinFirmware/Marlin/issues/7572#issuecomment-340641207 that using DELTA_PRINTABLE_RADIUS is better than DELTA_PROBABLE_RADIUS for setting the probe limits.   This is because the automatic probe code checks all locations for being reachable by the probe prior to doing the probe.
7 years ago
Scott Lahteine d48cb6bf41 Apply coding standards to Max7219 7 years ago
Scott Lahteine bd8bcf06e7 Updates to Anet A8 configurations
Based on #8426
7 years ago
Bob-the-Kuhn 7eea000f4b E0 auto fan fixes 7 years ago
Scott Lahteine b2dda096fe Fix FILAMENT_LCD_DISPLAY for disabled state 7 years ago
Scott Lahteine 1e8afb66b7 Fix a planner comment 7 years ago
Scott Lahteine 50f09cc029 Miscellaneous cleanup 7 years ago
Scott Lahteine 63257dc083 Fix M503 output for M145
Fixes #7978
7 years ago
Scott Lahteine 0918dae66e Add OV() macro for use in thermistor tables 7 years ago
Scott Lahteine 24057270a3
Merge pull request #8420 from RowanMeara/rm-dithering-2.0.x
[2.0.x] Fix Software Fan PWM
7 years ago
Scott Lahteine 5079a02c90 Add HAL_SERVO_LIB to HAL_Due.h 7 years ago
Scott Lahteine 9c3761047e
Merge pull request #8434 from thinkyhead/bf2_fix_M32_subroutines
[2.0] Fix 'M32 P' subroutines
7 years ago
Scott Lahteine e0d367f1fb Fix M32 P subroutine handling 7 years ago
Scott Lahteine 9f8b4c5ee8 Patch SD lib files for readability 7 years ago
Scott Lahteine 2c8c30437e Fix parser parameter value handling 7 years ago
RowanMeara 6131533157 Change dithering behavior to intended. 7 years ago
Scott Lahteine e70b44dc0b Make sure leveled[] is defined for later use 7 years ago
Scott Lahteine 54774841ba
Merge pull request #8416 from thinkyhead/bf2_M114_DETAIL
[2.0] Add M114_DETAIL to Configuration_adv.h
7 years ago
Scott Lahteine 009e3a7aa7 Add M114_DETAIL to Configuration_adv.h 7 years ago
Scott Lahteine 6d6c3b1e97 Fix up REPRAPWORLD_KEYPAD defines 7 years ago
Scott Lahteine 3f0a982b8c Move Filament Width Sensor to Configuration_adv.h 7 years ago
Scott Lahteine b76e173205 Move test extrusion options under G26 7 years ago
Scott Lahteine 14ebedca27 Drop unused LARGE_FLASH option 7 years ago
Scott Lahteine b7feb53e8a Support for Extrudrboard in Printrboard Rev.F 7 years ago
Scott Lahteine 91baca6abb Patches for compiler warnings/errors 7 years ago
Scott Lahteine 2f73dec077 Apply native workspace fixes for G92, G53-59 7 years ago
Scott Lahteine 04abd8d459 Improve and clarify M428 code 7 years ago
Dave Johnson c009a990e4 [2.0.x] Fix some 8-bit Teensyduino compile warnings (#8385)
* Fix some 8-bit Teensyduino compile warnings

-Override Teensyduino legacy NOT_A_PIN 127 define
-some fixups for Printrboard_RevF pins

* Proper cleanup of Printrboard Rev.F pins

* Apply LCD fixes to Printrboard v1
7 years ago
Scott Lahteine e8e92f8969 No leveling data in M114 if no leveling is enabled 7 years ago
Scott Lahteine f5d210c35c Fix report_current_position 7 years ago
Roxy-3D faaae7a1b2
Provide more clearance for BL-Touch probe 7 years ago
Scott Lahteine 06ee6584fd Remove offsets from soft endstops, tool change 7 years ago
Scott Lahteine c938273bd5 Coding standard patch of M290 7 years ago
Scott Lahteine 98c1265e3b Disable laser power when PWM goes to 0 7 years ago
Scott Lahteine d4a1154c25 Use do_blocking_move_to where possible 7 years ago
Scott Lahteine 36426af564
Merge pull request #8356 from tcm0116/2.0.x-M600
[2.0.x] Normalize load/unload length in M600
7 years ago
Scott Lahteine 1ed86adf9c Cleanup around updatePID 7 years ago
Scott Lahteine 75a58ee4b8 Fix position_is_reachable bug in waiting 7 years ago
LVD-AC e334efb2a7 PROBE_MANUALLY etc. 7 years ago
Bob-the-Kuhn b6415dc169 finish 7 years ago
Scott Lahteine 0efa66be0b Updates to Traditional Chinese
From @cheton at #8347
7 years ago
Scott Lahteine cba9c1cf9e Add pre-calculated planner.e_factor 7 years ago
Thomas Moore 600c85226e Normalize load/unload length in M600 7 years ago
Scott Lahteine 81b91b3f9d Clean up some trailing white-space 7 years ago
Roxy-3D 2f9848ede3
Correct gMax 1.5+ example file
And...   Keep both branches in synchronization.
7 years ago
Scott Lahteine 006dad4b52 Add pins_RURAMPS4D.h & change pins.h
http://3dtoday.ru/blogs/svs0724/ruramps4d-ramps-for-adruino-due-the-pilot-shipment-available-for-zack/
7 years ago
Scott Lahteine 00514857e9 SBASE serial port -1, RAMPS spacing 7 years ago
Scott Lahteine c66696c507
Merge pull request #8344 from tcm0116/2.0.x-delta_height
[2.0.x] Add delta_height variable in lieu of using home_offset
7 years ago
Scott Lahteine 22e18fe832 Patch _manual_goto_xy for kinematics 7 years ago
Scott Lahteine 0cfb936dd1 Clarify some motion code 7 years ago
Thomas Moore f34c3597dc Add delta_height variable in lieu of using home_offset 7 years ago
Bob-the-Kuhn d47fbf791b Arduini IDE compatibility changes
changed includes to make Arduino IDE happy
7 years ago
Scott Lahteine 95ea43bde4 Update XYZ dual stepper configurations 7 years ago
Scott Lahteine b0b4a20930 Tweaks to core motion code 7 years ago
Scott Lahteine 8805e24cc7
Fix tilt_mesh_based_on_probed_grid output bug 7 years ago
Scott Lahteine 24437fbb13
Fix G26 Y argument bug 7 years ago
Scott Lahteine 09b05c9d79
Merge pull request #8321 from Bob-the-Kuhn/pins_re-arm
2.0.x - pins_RAMPS_RE_ARM.h - add mega2560 pin numbers
7 years ago
Scott Lahteine e6788bb6ae Fix get_destination_from_command for E 7 years ago
Roxy-3D 967104e1ce
Default Extrusion Settings were off a few lines in some of the example config files. (#8333) 7 years ago
Bob-the-Kuhn 8875885a15 pins add old names
fix typo

re-write PWM section, add "not on Re-ARM" list
7 years ago
Roxy-3D 1c6e83c137
if !HAS_MESH we still need to do some motion! (#8328)
* if !HAS_MESH we still need to do some motion!

Thank You MagoKimbra !

* Ooops....   need #else and not #elif
7 years ago
Scott Lahteine 82f45c3e6a Patch G33 misuse of PROBE_MANUALLY 7 years ago
Scott Lahteine 064e6fe60e Remove debugging pin toggle from LCD code 7 years ago
Bob-the-Kuhn 0483a7df91 AVR RRD works
LPC1768 VIKI2 & RRDFG are working

looks like all SPIs are working

library change

sh1106 locks up

fixed lockup, started I2C SW com

pretty

re-org

restore a few files

make library happy

switched HAL version of rrd

fix travis error

travis error fixes

another travis fix

cleanup

minor update

one more

correct spacing in platformio.ini
7 years ago
Scott Lahteine 96c9d715f3 Patch abuse of sprintf_P in G33 7 years ago
Roxy-3D ed62c621d7
Fix G26 Circle Drawing. Add Default Extrusion Settings (#8313)
- Fix G26 Circle Drawing.
- Add default extrusion settings so machine can print lines on print bed
- Yet to be done: Get LCD Menu's to use these settings.
7 years ago
Scott Lahteine 8fea26aa9d Fix PID_autotune watch temp increase value 7 years ago
Scott Lahteine 2c099fd4c2 Update Thermal Protection Documentation 7 years ago
Colten Edwards a6160916b0 [2.0] Fix M48 for delta printers/ABL compile issue (#8286)
* fix M48 for delta printers

fix M48 for delta printers. home printer if not already homed.

* remove ENABLED(DELTA)

remove ENABLED(DELTA) as it is not needed.

* Update M48.cpp

* abl needs queue.h

without queue.h abl will not compile since there is a script that runs at the end of it and we need to queue it up.
7 years ago
Scott Lahteine 17ef0a513b Update G92 for native workspace 7 years ago
Scott Lahteine b4bf8928aa German language updates
Corresponding to #8306
7 years ago
Thomas Moore 73ca5345e1 Fix Delta EEPROM 7 years ago
Scott Lahteine 714d2b9bbc
Merge pull request #8297 from thinkyhead/bf2_M118_and_others
[2.0] Fix M118, compiler warnings, etc.
7 years ago
Alexey Shvetsov 83555933aa Add platformio support for stm32 (#8246)
[2.0] Add platformio support for stm32
7 years ago
Scott Lahteine 85a62bbf46 Misc. fixes to compiler warnings, etc. 7 years ago
Scott Lahteine e6aba99f16 Fix M118 parameters, with strict guideline 7 years ago
Scott Lahteine e9b1944a67 Patch non-extended font option 7 years ago
Roxy-3D 6324b09934
Revert "Fix EEPROM crc (#8284)" (#8292)
This reverts commit 172c36f517.
7 years ago
Rowan Meara 172c36f517 Fix EEPROM crc (#8284) 7 years ago
Scott Lahteine cc4d28b73c
Update bilinear for native workspace 7 years ago
Scott Lahteine 94c7205d64
Merge pull request #8281 from thinkyhead/bf2_alligator_dac
[2.0] Use fastio for Alligator dac084s085, etc.
7 years ago
Scott Lahteine 2246316605 Fix name collision. timer_t => hal_timer_t 7 years ago
Jason Hitesman 4efaef7039 [2.0.x] Fix archim2 SSDS define (#8278)
* Fix SSDS define

* Update pins_ARCHIM2.h
7 years ago
Scott Lahteine c8dfa26bc8 Use fastio for STM32F1 endstop interrupts 7 years ago
Scott Lahteine 185dec800b Use fastio for HAL SPI EEPROM 7 years ago
Scott Lahteine 297666ea14 Use fastio for Alligator dac084s085 7 years ago
Scott Lahteine c5d95d318b
Merge pull request #8249 from thinkyhead/bf2_nozzle_cleanup
[2.0] Cleanup Nozzle class, fix XY vs Z move order
7 years ago
Scott Lahteine 7e2fee9d56
Merge pull request #8274 from tcm0116/2.0.x-re_arm_D8
[2.0.x] Correct RAMPS_D8_PIN for Re-ARM
7 years ago
Scott Lahteine 59c558d612
Merge pull request #8275 from GMagician/2.0.x-Typo-fix
[2.0.x] typo fix (removed spaces)
7 years ago
Scott Lahteine be73d5cc08 Cleanup Nozzle class, fix XY vs Z move order 7 years ago
GMagician 9e93b7ccbd [2.0.x] removed spaces
Removed spaces in array declaration
7 years ago
Thomas Moore b91a822d7a Correct RAMPS_D8_PIN for Re-ARM 7 years ago
studiodyne d295f984e3
Update fwretract.cpp 7 years ago
Scott Lahteine 1b40e9c464 Implement CNC_COORDINATE_SYSTEMS 7 years ago
Scott Lahteine 1b42fba39b Add CNC_COORDINATE_SYSTEMS to configs 7 years ago
Scott Lahteine a22434508f Match tweaks to G33 from 1.1 7 years ago
Scott Lahteine c07bbd4154 Prettify some EEPROM code 7 years ago
Scott Lahteine d6aa127c76 Remove I2CPEM workspace offset 7 years ago
Scott Lahteine 79772219ae Fix Fan Multiplexer init 7 years ago
Scott Lahteine ca7d36d9ed RAMPS pins for ANET_KEYPAD_LCD 7 years ago
Colten Edwards e0a6ee8da5 [2.0] Fix up G33, LPC1768 + SDCARD_SORT_ALPHA (#8250)
* Update Conditionals_post.h

* Add a cast to round() to convert to a unsigned int

Add's a cast to round() so that it will compile properly. round() returns a float which must be cast to a integer for the following % operation. Use a unsigned int as a negative index to an array is wrong. Should never be more than 255 points allowing us to use a 8 bit cast.

* Update G33.cpp
7 years ago
Scott Lahteine dac1f6fe74 Tweaks to cubic_b_spline code style 7 years ago
Scott Lahteine 4df024d7b9
Merge pull request #8234 from thinkyhead/bf2_native_operation
[2.0.x] Operate in Native Machine Space
7 years ago
Scott Lahteine 601ccded89 Fix case-insensitive config issue 7 years ago
Scott Lahteine f8393a0908 Operate in Native Machine Space 7 years ago
Scott Lahteine d83a9a53e8
Merge pull request #8220 from thinkyhead/bf2_serial_port_-1
[2.0] Add SERIAL_PORT -1 option for configurators
7 years ago
Scott Lahteine 93ba72ea83 Add SERIAL_PORT -1, set on SBASE, STM32F103RET6 7 years ago
Scott Lahteine 7e43dd1d23 Fix probes configuration url
Based on #8241 by @machaj
7 years ago
AnHardt ca0e4b4e96 Some cleanup around 'lcd_bootscreen()' and 'lcd_kill_screen()'
Move 'lcd_bootscreen()' from `lcd_init()` to 'setup()' where it is cexecute exactly once. Saves 'bool show_bootscreen'.
Move the call of 'lcd_custom_bootscreen()' to the begin of 'lcd_bootscreen()'.
Move the delays into the related functions.
Move the picture loop around 'lcd_kill_screen()' into the function.
7 years ago
Scott Lahteine 84b93d941f
Merge pull request #8178 from thinkyhead/bf2_config_tweak
[2.0.x] Faster menu navigation for Anet A8
7 years ago
teemuatlut 70be4d206e [2.0.x] UltiMachine Archim2 (#8190)
* UltiMachine Archim2 support

* SPI gets included by the library

* Invert TMC2130 diag pin state

* Clean up Archim2 pins

* Update Archim2 config

* FAN2 -> FAN1

* Cleanup

* Add brief Archim installation instructions

* Bring pins into compliance

* Update 1.0 SD Detect pin for 1.1

* Update Configuration.h

* Update pins_ARCHIM2.h
7 years ago
Scott Lahteine f3deb37bdf
Merge pull request #8236 from thinkyhead/bf2_protect_M303
[2.0.x] M303 thermal runaway protection
7 years ago
Scott Lahteine 31f112cf58 Cleanup trailing whitespace 7 years ago
Scott Lahteine 2f9e42feb9 M303 thermal runaway protection 7 years ago
Scott Lahteine e5ae545647 Remove ADCKey steps acceleration 7 years ago
Luc Van Daele 6827e243a0 [2.0.x] G33 magic numbers (#8171)
* [2.0.x] G33 magic numbers

* oops

* Comments

* oops

* warning

* better comment section

* remarks

* extra grids
7 years ago
Scott Lahteine 8735ae984b
Merge pull request #8227 from tcm0116/2.0.x-pin_mapping
LPC1768: updates to use the new pin_t typedef
7 years ago
AnHardt c72a0610b4 Fix watchdog in WATCHDOG_RESET_MANUAL mode AVR 7 years ago
Thomas Moore 13d839795c LPC1768: updates to use the new pin_t typedef 7 years ago
Scott Lahteine eb13b8d985 Add MKS Gen L board 7 years ago
Morten 063e957fc4 Update pins_MKS_SBASE.h (#8188)
* Update pins_MKS_SBASE.h

Deleted E_MUX2, not used.
Changed #define LCD_PINS_D4      P0_14  // EXP1.5 to #define LCD_PINS_D4      P0_15  // EXP1.5, wrong in MKS's pinout schematic.
Swapped TEMP_BED_PIN and TEMP_0_PIN port's, request from user, more logical...

* Update pins_MKS_SBASE.h

Moved MUX signals to J8 and re added MUX2, cleaner wiring..
7 years ago
Scott Lahteine f7133e53fd
Fix case light off
Addressing #8205
7 years ago
Scott Lahteine 0108d5181f Allow asterisks in G-Code commands
Addressing #6655
7 years ago
Scott Lahteine 34745b2183 Organize boards.h by architecture 7 years ago
android444 9cc1d8e312 [2.0.x] Support for SilverGate Board 7 years ago
Scott Lahteine 03e5369411 Faster menu navigation for Anet A8
Addressing #8166
7 years ago
Scott Lahteine f1edf83720
Merge pull request #8187 from rafaljot/patch-5
Update InterruptVectors_Due.cpp
7 years ago
Scott Lahteine b2bd77c40a
Merge pull request #8191 from thinkyhead/bf2_rearm_more
[2.0.x] Add SDCARD_SORT_ALPHA options for LPC1768
7 years ago
Scott Lahteine 571ced712d Add SDCARD_SORT_ALPHA options for LPC1768 7 years ago
rafaljot 778e4e4c23
Update InterruptVectors_Due.cpp
const pfnISR_Handler *isrtab = get_relocated_table_addr();

What compiler do you use? Arduino 1.8.5 can't compile this "const".
7 years ago
Scott Lahteine cae8703e0d
Merge pull request #8181 from thinkyhead/bf2_fix_bootscreen_repeat
[2.0.x] Only show custom bootscreen once
7 years ago
Scott Lahteine a516856df9 Only show custom bootscreen once 7 years ago
GMagician 727a403ba1 [2.0.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour (#8176)
* [2.0.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour

NO_MOTION_BEFORE_HOMING should prevent XYZ movements only when homing is not done.
E axes should be allowed

* Update G0_G1.cpp

* Update G0_G1.cpp
7 years ago
Alexey Shvetsov 577659cacf Basic support for Azteeg_X5_GT (#8139)
* Basic support for Azteeg_X5_GT

Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>

* Add fan pins for AZTEEG X5 GT

Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>

* Fix endstop pins

* Add servo0 pin
7 years ago
Scott Lahteine 0b02f9cc33
Merge pull request #8168 from thinkyhead/bf2_config_tweak
[2.0.x] Apply Re-ARM SPI review items
7 years ago
Scott Lahteine 04c0d9f3c3 Implement kinematic software endstops 7 years ago
Scott Lahteine 9f89b5d876 Fix for MAX_VFAT_ENTRIES sanity check 7 years ago
Scott Lahteine 2cdde08339 Apply items specified in code review
Followup to #8122
7 years ago
Scott Lahteine 34be5d33c0 The plural of 'axis' is 'axes' 7 years ago
Bob-the-Kuhn 6e5f13a5c2
Merge pull request #8122 from Bob-the-Kuhn/2.0.x-restore-Re-ARM-RepRap-Discount-Full-Graphics-fix-(partial-solution)
2.0.x - Restore fix for garbaged display on Re-ARM with RepRap Full Graphics Smart Controller
7 years ago
Bob-the-Kuhn b7a66742dd tested
add sort alpha section to other LPC1768 boards
7 years ago
Jeffrey Li bbc2e66634 Fix AZSMZ MINI pins for new LPC1768 pinmapping 7 years ago
Scott Lahteine 31e96935f7 Fix EXTRA_FAN_SPEED
Addressing #8158
7 years ago
Scott Lahteine c94dce6b32
Merge pull request #8113 from thinkyhead/bf2_fixup_sd_reprint
[2.0.x] Cleanup after SD Print Again, whitespace, tabs
7 years ago
Scott Lahteine ce1c9c0808 Tweak QUICK_HOME description 7 years ago
Scott Lahteine 12458cefc4 Remove 5s timer hack. Encoder pos is saved on print start! 7 years ago
Scott Lahteine 9a4cf11835 Remove return_to_status_ms hack, just use defer... 7 years ago
Scott Lahteine 8949c8c0a5 Move SD_REPRINT_LAST_SELECTED_FILE to ultralcd.cpp 7 years ago
Scott Lahteine 817175613a
Merge pull request #8157 from thinkyhead/bf2_anet_10_servo
[2.0.x] Define a default SERVO0_PIN for Anet 1.0
7 years ago
Scott Lahteine 723f2a77f6 Implement support for Dual X and Y endstops 7 years ago
Scott Lahteine e04425281d Add Dual Steppers / Endstops to configs 7 years ago
Scott Lahteine edff2c917b Cleanup for DIGIPOTS settings 7 years ago
Scott Lahteine 3e8754a38a Add/correct time units on planner vars / M205 B 7 years ago
Scott Lahteine b2a48f1a04 Provide a SERVO0_PIN for non-standard LCD 7 years ago
Scott Lahteine b232f39341 AVR: Hidden option to use 8s watchdog 7 years ago
Scott Lahteine 9d4cfd2013
Merge pull request #8142 from thinkyhead/bf2_fix_m303
[2.0.x] Fix M303 thermal protection
7 years ago
Scott Lahteine eae0aea1e0 Fix M303 thermal protection 7 years ago
Luc Van Daele a1a4fc277e (2.0.x) serious bug G33 (#8136)
* (2.0.x) serious bug G33

* Revert config changes

This reverts commit 74b5a98223b7b7fb970d05b8541f4a079c3cfe56.
7 years ago
Thomas Moore 325233b454 Fix automatic stepper assignment for X/Y/Z dual stepper drivers (#8130) 7 years ago
Thomas Moore 50b4f9cbf7 LPC1768 Pin Mapping and M43 cleanup (#8119)
* LPC1768 M43 cleanup

* Update pinmapping.h to #define pins
7 years ago
Scott Lahteine 6b1d1a818b Revert default BABYSTEP_MULTIPLICATOR to 1 7 years ago
etagle ba8dc678f5 Arduino Due XON/XOFF implementation
Alos includes emergency parser and configurable TX/RX buffers for Arduino Due.
7 years ago
etagle 8d9c3cc2b7 Add a module for Due SRAM-based Interrupt Vector Table
This is the ONLY way to be able to override ISRs stolen by the Arduino Runtime, such as Serial or USB device interrupts. This feature is needed so Arduino modules can be replaced and enhanced.
7 years ago
etagle c9bbef6380 Cosmetic fix for HAL_AVR/MarlinSerial.cpp
Instead of using const char, it is better to use uint8_t
7 years ago
LVD-AC dcfc2503c2 G33 Autotune calibration update #10 7 years ago
Scott Lahteine b338cafc65 Merge pull request #8111 from thinkyhead/bf2_fwretract_fix_oct26
[2.0.x] Improved Firmware Retraction logic
7 years ago
Scott Lahteine ada90f7335 Clean up trailing spaces 7 years ago
Scott Lahteine 7fad26549b Concise SD_REPRINT_LAST_SELECTED_FILE description 7 years ago
Scott Lahteine 33f379fe88 Add some Polish language
Thanks @SCiunczyk
7 years ago
Scott Lahteine daeff5a11a Tweak neopixel self-test 7 years ago
Scott Lahteine 0ceec1f166 Fix leveling_active_at_z warning 7 years ago
studiodyne eb02f8c719 Improve FWRETRACT logic, add common sense 7 years ago
Scott Lahteine bd78ca0ee3 Add M290 Babystepping 7 years ago
Scott Lahteine ce5f0ec85a Bring STM32 example config up to date 7 years ago
Scott Lahteine 46e9eae159 Tweak to M100 config comment 7 years ago
Scott Lahteine c45514f811 Merge pull request #8094 from thinkyhead/bf2_neopixel_led_parity
[2.0.x] Bring NEOPIXEL_LED into parity with 1.1.x
7 years ago
Bob-the-Kuhn 229a27a1c7 save FLASH by using reduced font for some languages 7 years ago
Roxy-3D 3f5f39576b Reprint option for last SD Memory card file (#8106)
* Re-Print of same SD Memory Card file with single click

* Re-Print of same SD Memory Card file with single click
* This is the bugfix-v2.0.0 version of  https://github.com/MarlinFirmware/Marlin/pull/8104
7 years ago
Thomas Moore 9e699811d2 Make LPC1768 pinmapping not specific to Re-ARM (#8063)
* Merging early because of build failures.  See #8105

* Make LPC1768 pinmapping not specific to Re-ARM

* Add HAL_PIN_TYPE and LPC1768 pin features

* M43 Updates

* Move pin map into pinsDebug_LPC1768.h

* Incorporate comments and M226

* Fix persistent store compilation issues

* Update pin features

* Update MKS SBASE pins

* Use native LPC1768 pin numbers in M42, M43, and M226
7 years ago
Scott Lahteine 3ac581eac9 Neopixel changes for parity with 1.1.x 7 years ago
jeffyl 7b3098bbd5 Add AZSMZ Mini (#8005)
* Add AZSMZ Mini

* Remove tabs, adjust spacing

* Renumber boards to group by family

* Patch up spacing

* Tweak
7 years ago
Scott Lahteine e00ed10c4c GT2560 config MKS_MINI_12864 => SDSUPPORT 7 years ago
Scott Lahteine 10a5e4d80f Merge pull request #8078 from thinkyhead/bf2_mks_mini_lcd
[2.0.x] Add MKS MINI 12864 support to GT2560
7 years ago
Scott Lahteine ee9b8bf0f1 Add MKS MINI 12864 support to GT2560 7 years ago
Scott Lahteine f65fc7ffab Merge pull request #8044 from thinkyhead/bf2_mesh_consolidate
[2.0.x] Simplify mesh bounds config
7 years ago
Scott Lahteine 070cd34fe8 Merge pull request #8077 from thinkyhead/bf2_MKS_BASE_followup
Clean up HAL trailing spaces, MKS SBASE pins
7 years ago
Scott Lahteine 7f55d82fd1 Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h 7 years ago
Scott Lahteine 90a14b4f5b Clean up HAL trailing spaces, MKS SBASE pins 7 years ago
Thomas Moore 51fafccc16 [2.0.x] Enable hardware serial ports on LPC1768 (#8004)
* Enable hardware serial ports on LPC1768

* Fix compilation errors with other HALs

* FIx order of includes in LPC1768 HAL main.cpp

* Add support for RX_BUFFER_SIZE and TX_BUFFER_SIZE options in Configuration_adv.h
7 years ago
Scott Lahteine 580b6e9089 Apply physical limits to mesh bounds 7 years ago
Scott Lahteine 4e2baeb3e1 Update indentation, file-wrapping for Marlin 2.0.x 7 years ago
Scott Lahteine 60af705e6d Relocate SPI.h to the HAL folder 7 years ago
Scott Lahteine 46aae4c6e7 Merge pull request #8074 from thinkyhead/bf2_verbiage_like_8061
Fix some config verbiage
7 years ago
Scott Lahteine 3356d5a72d Merge pull request #8072 from thinkyhead/bf2_fix_M600
[2.0.x] Fix position sync in M600 pause/resume
7 years ago
Scott Lahteine 5f87324536 Fix some config verbiage 7 years ago
Scott Lahteine 272f9f65dc Fix some typos 7 years ago
studiodyne 8181220bfd Fix position sync in M600 pause/resume 7 years ago
cdedwards 6296ab2173 Add GFX overlay to UBL mesh edit (#8038)
* Add GFX overlay to UBL mesh edit

Fixed misplaced HAS_TEMP_BED in dogm_bitmaps.h

rename _lcd_babystep_zoffset_overlay to _lcd_zoffset_overlay_gfx and move it out of BABYSTEP_ZPROBE_OFFSET to we can use it for over things. Add this function into UBL mesh edit screen.

update all Configuration.h to add ENABLE_MESH_EDIT_GFX_OVERLAY

* Add Sanity to UBL  insanity

Need to check for DOGLCD  otherwise error out.
7 years ago
Roxy-3D 72156a2029 change to better (more clear) names (#8050)
set_destination_to_current() changed to set_destination_from_current()

set_current_to_destination() changed to set_current_from_destination()
7 years ago
Scott Lahteine 0cb423b5b3 Apply consistency for other configs 7 years ago
Scott Lahteine 8c78f8f790 Add Makeboard MINI for Micromake C1 7 years ago
Scott Lahteine 1fbb307aaf Merge pull request #8021 from thinkyhead/bf2_scroll_longnames
[2.0.x] Add SCROLL_LONG_FILENAMES to reveal longer filenames
7 years ago
Scott Lahteine 3d2b2eb1ca Prevent SDCARD_SORT_ALPHA from exploding 7 years ago
Scott Lahteine 783ddf9691 Add SCROLL_LONG_FILENAMES option 7 years ago
Roxy-3D 5439358281 Basic UBL operations working on 32-bit platforms (#8024)
* 32-bit work for UBL

* Update FT i3-2020 reference file
7 years ago
Scott Lahteine 9e5cbf0198 BQ should set this in its config, and does 7 years ago
Scott Lahteine 348e5e3109 Simplify Cartesian probing boundaries
Followup to #8012
7 years ago
Luc Van Daele 3986a84f77 boolval revisited (#8016) 7 years ago
Roxy-3D 572cf0ec95 UBL able to generate mesh and save and load it on 32-bit platforms (#8015)
* Get UBL Mesh Generation, Mesh Save & Mesh Load working with 32-Bit platforms

* clean up read_data() and write_data() for non-LPC1768 HAL's

* Get read_data() and write_data() return codes consistent

All HAL's read_data() and write_data() return false if they succeed.

* Get read_data() and write_data() return codes to be consistent

Make read_data() and write_data() return true if an error happens.

* Say UBL is now checked out on machine types in default Configuration.h file.
7 years ago
Thomas Moore 67cc29cd3c Update UBL mesh boundaries to accomidate beds centered at 0, 0 (#8012) 7 years ago
Roxy-3D 6cb26c98c8 Fix Baby Stepping on 32-Bit platforms (#8001)
Also, Max7219 debug code was used for this effort.   It has been
improved and hardened.
7 years ago
Scott Lahteine 3b7b0492f8 Merge pull request #7993 from jeffyl/bugfix-2.0.x
[2.0.x] Proper support for AZSMZ 12864 LCD on SmartRAMPS
7 years ago
Jeffrey Li 26531f2715 Add lcd to all sample configs 7 years ago
Scott Lahteine ce48403a0b Add EXTRA_FAN_SPEED feature
Based on #7883 by @studiodyne
7 years ago
Jeffrey Li eeb4611606 Add proper support for the AZSMZ 12864 LCD on a SMART RAMPS 7 years ago
Scott Lahteine c46189e429 Fix UBL+Delta segmented feedrate
Based on #7948
7 years ago
Scott Lahteine 5c4f3e0107 Add LCD_SET_PROGRESS_MANUALLY 7 years ago
Scott Lahteine 014a83fe09 Merge pull request #7984 from thinkyhead/bf2_micromake_c1
[2.0.x] Micromake C1 Configurations, Unaccented French
7 years ago
Scott Lahteine bc7df0188e Add Micromake C1 configurations 7 years ago
Scott Lahteine 34a261416f Add unaccented French language 7 years ago
Scott Lahteine e587f0893c Define AVR_ATmega2560_FAMILY_PLUS_70 in Conditionals 7 years ago
Scott Lahteine fd128b3c93 Fix some AVR HAL code style 7 years ago
Scott Lahteine 799360c576 Enhance Teensy/RAMPS pins files 7 years ago
Scott Lahteine d3e5a22a5d Add MIN_SOFTWARE_ENDSTOP_[XYZ] to example configs 7 years ago
Jeff Eberl b206f70693 Split the software endstop capability by axis. 7 years ago
Scott Lahteine ec69e97bda Merge pull request #7974 from jeffyl/bugfix-2.0.x
Fix include path for VIKI
7 years ago
Morten 91e28edda6 [2.0.x] Add new board: MKS Sbase (#7945)
* Add files via upload

* Add files via upload

* Add files via upload

* Checked LCD / edited / revised pins_MKS_BASE.h

As requested :)

* Delete Configuration_adv.h

* Delete Configuration.h

* Deleted /Marlin/Marlin/src/config/examples/MksSbase/*.* and moved them to /Marlin/Marlin/src/config/examples/Mks/Sbase/*.*

* Add files via upload
7 years ago
Jeffrey Li 3c8a3a02ba Fix include path for VIKI 7 years ago
Scott Lahteine 4586acad8c Merge pull request #7959 from alexxy/bugfix-2.0.x
Python isnt always python2
7 years ago
Scott Lahteine 497f86453e Merge pull request #7964 from gallynero/patch-2
fix 'axis_unhomed_error' not defined error
7 years ago
Scott Lahteine c0dddd4233 Tweaks to tool_change, GcodeSuite::T() 7 years ago
Scott Lahteine ca66574062 ADC sensor fix inspired by 'Evgen2' on Twitter 7 years ago
Scott Lahteine 1344ca4b2f UBL no longer needs ubl_state 7 years ago
Scott Lahteine 8dd08425fd Improve LCD leveling edits 7 years ago
Scott Lahteine 3e3911fb81 Use planner.leveling_active for all leveling systems 7 years ago
Scott Lahteine 32c607ffe2 Ensure fade factor is recalculated if fade height changes 7 years ago
Scott Lahteine ca1e47375c Move fade_scaling_factor_for_z to Planner 7 years ago
Scott Lahteine 9a930ebec2 Make leveling_is_active a macro 7 years ago
Scott Lahteine 58abc66c1d Tweak bed leveling conditionals 7 years ago
Scott Lahteine 1adb5a6a48 Remove obsolete UBL z_offset 7 years ago
gallynero 3619a4cbea fix 'axis_unhomed_error' not defined error
Fix 'axis_unhomed_error' not defined error when pause with unhomed status
7 years ago
Alexey Shvetsov 12d212d1b4 Python isnt always python2
So now this script is compatible with both python versions 2 and 3

Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
7 years ago
Scott Lahteine cc01a36363 Merge pull request #7947 from thinkyhead/bf2_more_READMEs
[2.0.x] Add a README.h file for Arduino IDE users
7 years ago
Scott Lahteine 4764710b11 Add a README.h file for Arduino IDE users 7 years ago
Bob-the-Kuhn 4e3ee845b9 config_adv (#7941)
get rid of twi.h

move to board files
7 years ago
Roxy-3D 0e260c6c1d Get FolgerTech i3-2020 working again with 32-bit platforms (#7944)
Setup FolgerTech i3-2020 Configuration files as a reference platform for
32-Bit work.

Also fix MAX7219 debug lights on 32-bit platforms.
7 years ago
Bob-the-Kuhn 26bfae58d4 MPC4451 I2C support 7 years ago
Scott Lahteine 1f5c432e29 Merge pull request #7920 from thinkyhead/bf2_neopixel_full
[2.0.x] Move FILAMENT_RUNOUT_SENSOR to a feature
7 years ago
Scott Lahteine 732e87e83c Merge pull request #7892 from GMagician/Serial-double-echo-fix
[2.0.x] Serial double echo fix
7 years ago
Scott Lahteine f8e8fcb978 Move FILAMENT_RUNOUT_SENSOR to a feature 7 years ago
Slawomir Ciunczyk a11e6a1022 Different NEOPIXEL types
Same as #7728 but for 2.0.x,
Lot of cleanup and remove references in whole code to other "LED files" than leds.h. Now will be much easier to add next drivers/libraries. e.g. FastLED. But bad news, currently FastLED is suporting only RGB devices (no RGBW)
7 years ago
Scott Lahteine b30b55307c Merge pull request #7909 from thinkyhead/bf2_goodbye_legacy_advance
[2.0.x] Remove legacy ADVANCE feature
7 years ago
Scott Lahteine 1d04197f2f Merge pull request #7916 from thinkyhead/bf2_probeless_ubl
[2.0.x] Allow UBL G29 and G26 to build without a probe
7 years ago
Thomas Moore 9b0ee53b12 Use segmented moves when moving axis from LCD 7 years ago
Scott Lahteine 442669d23c Allow UBL to build without a probe 7 years ago
Scott Lahteine 20ebe218c8 Tweaks to VIKI lcd support 7 years ago
Scott Lahteine 09fa34a9e1 Modernize configs 7 years ago
Scott Lahteine 560d366b80 Move VIKI SCK/MOSI pins fix to Conditionals_POST.h 7 years ago
Scott Lahteine e9bcb9d048 Add 4 new LCD displays 7 years ago
Scott Lahteine 03f4891fb9 Remove legacy ADVANCE feature 7 years ago
GMagician 546f02c6f4 [2.0.x] Addressing #7896
Compiler error, added char c variable
7 years ago
GMagician eb96d37da0 Serial double echo fix
Fix double character sent when TX buffer size is 0 on mega2560
7 years ago
Scott Lahteine deeea98d22 LCD filename already concatenated 7 years ago
Scott Lahteine a058638d11 Merge pull request #7875 from thinkyhead/bf2_fill_eeprom_dat_ff
[2.0.x] Update LPC persistent store to initialize eeprom.dat with FF
7 years ago
Scott Lahteine ae1a18d0a1 LCD filename already concatentated 7 years ago
Scott Lahteine 12aa1b999a Fix display issue with SD_SORT_ALPHA cached names 7 years ago
Dave Johnson 9d0e4ea3d5 [2.0.x] Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled (#7879)
* Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled

If HOME_AFTER_DEACTIVATE, there is no need to warn on LCD since printer will home prior to starting print.  Saves 60 bytes PROGMEM on AVR with U8g panel.

* Reduce lines used

* Reduce lines used
7 years ago
Scott Lahteine 8315a8a716 Apply fixes for DUE
Alternative to #7882. If F_CPU is greater than 1000 it can be evenly divided by 8. Over 10000, 16; over 100000, 32; over 1 million, 64; etc.
7 years ago
Scott Lahteine 4b36a542e0 Merge pull request #7876 from thinkyhead/bf2_hotend_messages
[2.0.x] Addressing #7612
7 years ago
Unknown 12730c1303 [2.0.0] Resolve USE_CONTROLLER_FAN compile errors
Add to controllerfan.cpp:
#include "../module/stepper_indirection.h"
#include "../module/temperature.h"
7 years ago
Scott Lahteine 7fb3343bda [2.0.x] Addressing #7612
Change "extruder" to HOTEND in sanity error messages
7 years ago
victorpv 8998f31ee1 Update LPC persistent store to initialize eeprom.dat with FF
This change initialize any data in eeprom.dat beyond the current file size to FF.
That way if eeprom.dat is deleted and created again, it doesn't take the old values or random ones, but rather starts with FF in all positions as a real brand new or erased eeprom.dat
Currently if you delete eeprom.dat and restart the board, the new file is created in the same sector with the same content, since FAT does not actually delete the data, just marks the sector as free. I tested by deleting the file, and then rebooting the board, and checking the file content.
The change can be tested in the same way, deleting, rebooting the board, and then the new content should be all FF.

If an eeprom file already exist with data on it, but smaller than E2END, it will be padded with FF on first access, so it will not have random or old content appended.
7 years ago
Scott Lahteine 2aa22c5a5e Merge pull request #7874 from thinkyhead/bf2_anet_encoder_pulses
[2.0.x] Fixing ANET encoder pulses
7 years ago
Scott Lahteine f99d1dedae Fixing #7833
Derived from #7873
7 years ago
Scott Lahteine de84f57a9c Patch SD file draw bug 7 years ago
Scott Lahteine ef90b49fff Remove extra NEWPANEL settings in Conditionals_LCD.h 7 years ago
Scott Lahteine 67a7dd9792 Merge pull request #7866 from thinkyhead/bf2_finally_G33_is_done
[2.0.x] Apply G33 updates
7 years ago
Scott Lahteine b220bc7521 Apply G33 updates
Adapted from #7865
7 years ago
Scott Lahteine 9fe7f53216 Misc general spacing cleanup 7 years ago
Scott Lahteine c0382cd8cd Add UTF-8 mapper for Slovak language
Based on #7862, #7846 by @rmoravcik
7 years ago
Scott Lahteine c81843a414 Set TEMP_SENSOR_0 to 1 in CR-10 example config
As pointed out in #7692 by @totalitarian
7 years ago
android444 72693a7e87 [2.0.x] Fixed RAMPS FD V1 pins.h file (#7852)
* test only

test

* Fixed RAMPS FD V1 pins.h file

* Fix typo
7 years ago
Chris Pepper aa51a02b8f LPC1768: fix serial buffer underrun (#7854)
When the buffer is empty index_write == index_read, but they needed constrained by buffer_mask
7 years ago
Chris Pepper 46b2773e13 General fixes for LPC1768 (#7834)
* fixed some include paths

* LPC1768: Fix Serial API

Add missing serial methods used if TX_BUFFER_SIZE is set
Change return value of HalSerial:read to match Arduino API

* LPC1768: add filters to ADC

This is to try and compensate for hardware issue and oversensitivity to noise

* LPC1768: remove the polling section of delayMicroseconds

* LPC1768: lock usb mass storage device while device accesses it.

Currently only applicable to persistent store,
The device always has priority and will unmount the sd card from the host, Windows then tries to automount again so it can look like the explorer window freezes. Linux Mint, by default, just closes the Nemo window.

* Add timeout to make sure if Serial never connects that Marlin still boots

* Remove unneeded ifdef CPU_32_BIT

In general the need for ifdef CPU_32_BIT blocks means that something is missing from the HAL API or a Platform, in this case HAL_TICKS_PER_US was missing from the AVR Platform

* LPC1768: relocate RE-ARM debug_extra_script.py
7 years ago
Scott Lahteine 7258218f89 Fix xon_xoff_state initialization 7 years ago
Scott Lahteine bf596fb039 Merge pull request #7818 from thinkyhead/bf2_xon_xoff
[2.0.x] Add XON/XOFF serial handshaking
7 years ago
Scott Lahteine ca3c9baf1b Fix DUAL_X_CARRIAGE manual moves, add T0/T1 menu item 7 years ago
Scott Lahteine a8b8d4e85e Add a typedef for MENU_ITEM(function,…) functions 7 years ago
Scott Lahteine 6ea2cc0293 Make prepare_move_to_destination_dualx a proper move function 7 years ago
Scott Lahteine e472a7569b Remove extra auto_current_control call 7 years ago
Scott Lahteine 508d764d63 Add serial XON/XOFF handshaking
From @ejtagle, originally #7459
7 years ago
Scott Lahteine af15383578 Add XON/XOFF options to example configs 7 years ago
Scott Lahteine 33c4d45f2f Merge pull request #7812 from thinkyhead/bf2_fix_resume_print
[2.0.x] Fix broken M600 resume_print
7 years ago
Scott Lahteine a03e70d46c Fix M600 resume_print
Derived from #7811 and #7779
7 years ago
Scott Lahteine 2d41c59320 Tweak some spacing 7 years ago
Scott Lahteine 5ae390e240 Apply NO_MOTION_BEFORE_HOMING to examples 7 years ago
Scott Lahteine 90af1fe5ee Implement NO_MOTION_BEFORE_HOMING option 7 years ago
Scott Lahteine 965b0ab53e Spacing adjustments 7 years ago
Scott Lahteine ac41eb5871 Merge pull request #7722 from tcm0116/2.0.x-warnings
Cleanup 2.0.x compiler warnings
7 years ago
Thomas Moore ae2173cd52 Synchronize retractions 7 years ago
Thomas Moore 0cb00f52d9 Cleanup warnings 7 years ago
Bob-the-Kuhn 1beaef0452 fix 3S hang & enable SPLIT 7 years ago
Thomas Moore 020ce176c4 Fix Servo class compile errors 7 years ago
Bob-the-Kuhn 62054af6eb 2.0 compile issues 7 years ago
Christopher Pepper bea3ec2724 M355 S0, S1 fixes & faster LCD, SD card
fix Travis error
7 years ago
Scott Lahteine 8c622a59cf Merge pull request #7774 from thinkyhead/bf2_lcd_leveling_status
[2.0.x] Show leveling status on character LCD
7 years ago
Scott Lahteine 56c05a7015 Show leveling status on character LCD 7 years ago
Scott Lahteine 2ee4eef25c Merge pull request #7748 from GMagician/Addressing-#7730
[bugfix-2.0.x] Fix compiler error (issue #7730)
7 years ago
Scott Lahteine ffed785656 Merge pull request #7768 from thinkyhead/bf2_HAL_STM32F1
[2.0.x] HAL for STM32F1
7 years ago
Scott Lahteine 604b804125 Add confirmation step to Init EEPROM 7 years ago
Tannoo c869dc9745 User script return-to-status option 7 years ago
victorpv e9acb63290 STM32F1 HAL
Adding files for STM32F1 HAL based on libmaple/stm32duino core.
Current persistent_store uses cardreader changes to be sent in separate
commit, but could be changed to use i2c eeprom.
7 years ago
Scott Lahteine c2b1d51f16 HAL whitespace and style cleanup 7 years ago
Scott Lahteine c272f2c84e Cleanup pins spacing 7 years ago
Scott Lahteine dff2904c0f Marlin code whitespace cleanup 7 years ago
Scott Lahteine 599f2ad983 Define pin accessors more like <Arduino.h> 7 years ago
Scott Lahteine 358656acc3 Tweak HAL_adc_start_conversion 7 years ago
Scott Lahteine 0cb4d25431 Tweaks to Servo classes 7 years ago
Phr3d13 10c1b442ca Fixes for Anet10 and gt2560
Fixes for 2 "... not declared in this scope" compiler errors.
7 years ago
Phr3d13 5a3a53379f Update pins for GT2560_Rev_A_Plus
For PR #7738
7 years ago