af1950a63e
Improve sync of stepper positions
7 years ago
d7b699ec34
Fewer includes of vector_3.h
7 years ago
05fca752d6
Clean up autostart handling
7 years ago
05c33833e7
[2.0.x] Add NO_LCD_MENUS option ( #10582 )
7 years ago
59fda986ea
Allow Z_AFTER_PROBING to be 0
7 years ago
9e0d99c0c6
Round all floats in string conversion functions ( #10566 )
7 years ago
cd08f01bb4
Fix M421 comment in gcode.h
7 years ago
8db7fb226a
Fix M420 C for UBL
7 years ago
724e9f56c8
Removed "const" to match parser. ( #10548 )
7 years ago
2e1939e85c
[2.0.x] report error on unsupported commands ( #10553 )
...
Raise an error when an unknown/unsupported G/M command is requires.
This will address #10546
7 years ago
a51ba6e3f6
Fix ABL grid bounds test for Delta/SCARA
...
Addressing #10538
7 years ago
63e0b36f8b
Fix G29_RECOVER_COMMANDS typo
7 years ago
eef0248a1c
Add M420 C to adjust the whole mesh ( #10522 )
7 years ago
02a711c4d6
[2.0.x] Fix crash upon repeated calls to process_subcommands_now_P ( #10509 )
7 years ago
f06c3c38b9
Fix M0_M1 with no LCD
7 years ago
f423e54f77
Strip trailing spaces
7 years ago
cb46cb8480
Add HAS_HEATED_BED conditional ( #10495 )
7 years ago
1c3d49afe0
Fix G28 with Z_AFTER_PROBING
...
Fix #10476
7 years ago
023385ca59
Merge pull request #10479 from thinkyhead/bf2_creality_power_loss_resume
...
[2.0.x] Creality3D Power-Loss Recovery
7 years ago
3396671011
[2.0.x] Reset LCD status to fallbacks ( #10470 )
...
* Remove obsolete strings
* Tweak some static consts
* Reset LCD status to fallbacks
7 years ago
11ab017dd0
Creality3D Power-Loss Recovery
7 years ago
7dcd0a1cff
Add R parameter to G28 to specify pre-raise
7 years ago
a90cbc6339
[2.0.x] Wait for bed heaters between probing ( #10472 )
7 years ago
d8a8eec6ea
Add THERMAL_PROTECTION capability
...
Based on #10465
In response to `M115` the firmware reports if Thermal Protection is enabled (1) or not (0). This information can be used by software such as OctoPrint (more precisely the Printer Safety Check plugin) to warn users when Thermal Protection is not enabled in the firmware.
Co-Authored-By: andrivet <sebastien@advtools.com>
7 years ago
65a6a86d19
Don't report point 0 in MBL G29
7 years ago
5cc7916e69
Add G29_RETRY_AND_RECOVER feature
...
- Add an option to retry G29, optionally executing a G-code procedure after each failed probe.
7 years ago
78ea4871f9
Fix up enqueue now functions
...
…and apply to MALYAN_LCD.
7 years ago
df2f24617b
Use 0 as the bed position (not Z_MIN_POS)
7 years ago
52c024e260
M221 with no parameters report flow
7 years ago
0746aff595
Improve UBL mesh report. Add M420 T, M421 N
7 years ago
99282a46e9
Make sure ABL (manual) starts close to the bed
7 years ago
3c5c6d478a
Prettify process_parsed_command
7 years ago
bb7064cc30
Tweak MBL move to bed code
7 years ago
daa712455b
Make sure MBL starts close to the bed
...
Fix #10390
7 years ago
4c8751727a
Fix M118 parameter handling
...
Fix #10388
7 years ago
646aa20b43
Overhaul of G33 Delta Calibration ( #8822 )
7 years ago
ac2e0afb62
Low Point for delta calibration ( #10363 )
7 years ago
2d9b0a66fe
Add Filament Change accelerations
7 years ago
8b8ad14178
Add Z_PROBE_LOW_POINT to prevent damage
7 years ago
cea398849e
Tweak to gcode_line_error/return
7 years ago
e8e60263c8
Scale feedrate (mm/s to deg/s) for SCARA
7 years ago
8bc93c6f2b
Improve heating/cooling LCD messages ( #10293 )
7 years ago
241996d5d6
Merge pull request #10257 from thinkyhead/bf2_tool_change_debug
7 years ago
adcb87f0db
Z Endstop Servo => Z Probe Servo
7 years ago
1a75165f35
For set_z_fade_height use set_bed_leveling_enabled
7 years ago
55e9b85ad6
Clear the "Wait for user" message set by M0/M1
...
See https://github.com/MarlinFirmware/Marlin/issues/10246#issuecomment-377146936
7 years ago
c1f58a238d
No delay in sensorless quick homing ( #10254 )
7 years ago
1be955e52a
Alert users about low Z jerk values
7 years ago
9e4c037cef
Wait before turning off PRINTER_EVENT_LEDS at print end ( #10248 )
7 years ago
7b8bb2519e
Fix gcode_line_error call
...
Followup to 3007eee
7 years ago
aa20b3ef7c
Fix linear/3-point manual leveling buffer overrun
...
Fixes #10137
7 years ago
38378cd0e8
M218 with DELTA needs planner.h
...
Fix #10232
7 years ago
3007eee22e
Require a checksum when writing to SD
...
From #10204 by @adriancuzman
7 years ago
9656a82609
Fix G53/CNC_COORDINATE_SYSTEMS compilation, Travis testing ( #10227 )
7 years ago
d1f14202a9
[2.0.x] NANODLP_Z_SYNC requires linear axes ( #10240 )
7 years ago
1cb810ff1c
[2.0.x] Automatically reset stepper timeout ( #10179 )
...
* Automatically reset stepper timeout in manage_inactivity
Any code that adds moves to the planner can skip resetting the stepper timeout. We can let `idle` / `manage_inactivity` reset the timer whenever it detects any moves in the planner.
* blocks_queued => has_blocks_queued
7 years ago
045ee28c50
Tweaks to M915
7 years ago
ff304d3767
Allow G53 to go back to native space
7 years ago
bc45fb6b13
Tweak use of move_z_after_probing
7 years ago
c352954882
Allow no raise after run_z_probe in probe_pt
7 years ago
ae39fbd646
Also suppress keepalive with suspend_auto_report
7 years ago
a46bac3100
Add 'I' parameter to M906/M913/M914; 'T' to M906/M913
7 years ago
cfc13ed7f3
Quiet M906/M913/M914 with axes. Patch for DISTINCT_E_FACTORS.
7 years ago
48d7036874
Consolidate smart stepper driver initialization
7 years ago
dd2949922b
Consolidate 3-point leveling point options
7 years ago
8922b56b58
Fix some spelingz
7 years ago
a6feb58837
Delta support for multiple hotends with offsets ( #10118 )
7 years ago
2e43438e0c
Add C parameter to M27 to include the long filename
...
In answer to #10001
Add an option to retrieve the currently open file name (long filename if possible).
7 years ago
14c03cb6f4
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) ( #10069 )
...
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
7 years ago
5b45aab262
M218: report with no parameters
7 years ago
28f1276286
[2.0.x] Add Z_AFTER_PROBING option ( #10058 )
...
Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
7 years ago
bae1cb859c
Patch flush_and_request_resend for 1.1.x parity
7 years ago
0d8c15c01f
restore PR 9661 files & V1 fix
7 years ago
751785fc97
Followup to recent patches
...
- `M666` is static, not inline
- Disambiguate some stepper macros
7 years ago
f003173752
Fixup M666
...
Followup to d6df032
7 years ago
bf59a4a6df
Revert "[2.0.x] DUE compatibility with shared SPI LCDs, USB mass storage, add pin defs & update examples\MakerParts\Configuration.h"
7 years ago
fd1d590726
[2.0.x] Silence M204 ( #10037 )
...
`M204` is often used by slicers to set acceleration depending on perimeter, infill, etc., so Marlin's answers are flooding the serial windows. Silence `M204` according to the philosophy that setter commands should only send a reply if no parameter is given.
7 years ago
d6df0322c2
Update M666 for XYZ dual endstops
7 years ago
fbc41c0e98
Update Marlin G-code summary
7 years ago
ddce486360
Merge pull request #10032 from thinkyhead/bf2_unknown_z_no_raise
...
[2.0.x] Add UNKNOWN_Z_NO_RAISE to prevent Z grinding
7 years ago
419d12ca1b
Add UNKNOWN_Z_NO_RAISE option
...
With this option enabled, Z won't ever be raised until after `G28` has been completed, and it won't raise if Z becomes unknown. This is good for machines whose beds fall when Z is powered off.
7 years ago
914bb80bde
removed SDSS init
...
added device & comm drivers for shared SPI LCDs
mistyped some updates in ultralcd_impl_DOGM.h
remove unwanted changes in onfiguration.h
still can't type
Update HAL_LCD_class_defines.h
include USB mass storage & misc
7 years ago
49ca67202f
Patch configuration_store for extra serial port
...
Fix #9948
7 years ago
3c2bfa5e53
Update powersupply_on in power_on/off ( #10015 )
...
Fix #10004
7 years ago
42608b1925
Init old_red to 127 to ensure initial change
...
Fix #10012
7 years ago
ffbf63e6af
Add HAS_TEMP_SENSOR conditional
7 years ago
920d92aa46
Merge pull request #9974 from thinkyhead/bf2_tmc_util_progmem
...
[2.0.x] Move tmc_util.* extended_axis_codes to PROGMEM
7 years ago
b198b49d15
Followup to AUTO_REPORT_SD_STATUS
...
Followup to #9832
7 years ago
2057177184
Make enums into implicit char
7 years ago
e28e3bb532
Move extended_axis_codes to PROGMEM
7 years ago
bf9fc8ac0e
M851 - report only without parameters
7 years ago
61620cbd15
Tweak M211
7 years ago
6e08ddce6e
Correct M401 / M402 description
7 years ago
88b6a15b47
Update M900 verbiage
7 years ago
91db7930dc
Drop SCARA_FEEDRATE_SCALING
...
The updated planner takes the length of the move, so this pre-calculation is no longer needed.
7 years ago
118899357d
Add sanity checks to Linear Advance 1.5 ( #9873 )
7 years ago
a446433c87
Fix SENSORLESS_HOMING for Core Kinematics ( #9868 )
7 years ago
eb079959fb
Report sd card progress [FR] #9751 ( #9832 )
...
* SD Status auto-report feature
Feature Request #9751
7 years ago
3f89bbeab5
Drop a conditional only used once
7 years ago
b2cf253a13
Add RESTORE_LEVELING_AFTER_G28 option
7 years ago
65519263f4
Fix broken LEVEL_BED_CORNERS
...
Fix #8805
7 years ago
2bd252b501
[2.0.x] LIN_ADVANCE v1.5 ( #9712 )
7 years ago
1d7f5be0ff
quick_home_xy sensorless homing
7 years ago
d4e4fe40e0
Add SENSORLESS_HOMING delay to quick_home_xy
...
Fix #9471
7 years ago
3af988a7f3
Add sensorless homing delay to home_z_safely
...
Based on #9705
7 years ago
8ffa0b24a4
Strip excess G28 debug logging
7 years ago
9019ea0fce
Option to force X or Y to home first when homing the other axis
7 years ago
241e55ef3b
Apply SERIAL_FLUSH macro
7 years ago
6a70a4fbb3
Fix G26 circles ( #9627 )
...
Easier to configure. Catch an odd divisor.
7 years ago
c78e1c0f23
Fix G26 Circles... ( #9641 )
...
* Fix G26 Circles...
7 years ago
133b38b93b
Complete M48 description ( #9631 )
7 years ago
8d71ad37cb
flush comment to match 1.1.x
7 years ago
377108619b
Fix plan_arc clockwise (G2)
...
Fix #9482
7 years ago
e3043d7ac7
Fix #8744
7 years ago
da693a636e
Fix handling of escapes in serial input
7 years ago
c30a8067ab
Prevent watchdog reset due to many comments
...
Addressing #7449
7 years ago
b7053156fe
Minor comment/condition cleanup
7 years ago
1541224a81
Enable Z axis and delta sensorless homing ( #9516 )
7 years ago
09c8807a36
Minor formatting in queue.cpp
7 years ago
ca8fdff1af
Comment G26 properly
7 years ago
b5e92f4f90
[2.0.x] Enable / disable PSU automatically ( #9503 )
7 years ago
a8c4174a13
M100 comment
7 years ago
338dac258b
[2.0.x] Fix compiler error when G26 is enabled ( #9492 )
7 years ago
4ddb6a3a1f
Merge pull request #9470 from thinkyhead/bf2_malyan_clueless
...
[2.0.x] Malyan M200 LCD
7 years ago
03bfc0d7c8
Merge pull request #9439 from thinkyhead/bf2_fix_G26_circle_bumps
...
[2.0.x] Change G26 circle angles
7 years ago
e5ee0b6f6c
Implement MALYAN_LCD
7 years ago
2ea4e74ed3
Misc. comments
7 years ago
6ace57e1b0
[2.0.x] remove duplicated include ( #9445 )
...
This was present in #9357 but lost
7 years ago
e6cdc438fd
Change G26 circle angles
...
To prevent the nozzle from colliding with the printed pattern.
7 years ago
a8764ac5d5
G26 parity with 1.1.x
7 years ago
e1117a8492
[2.0.x] fix compile errors when CNC_COORDINATE_SYSTEMS is enabled ( #9380 )
7 years ago
21179f8300
Fix the "slow" version of the G-code parser
7 years ago
34160806c0
Fix broken G29 W I J
7 years ago
f5cfdf6efe
Use _BV32 to avoid name conflict
7 years ago
fc5c1a28d8
Fix M118 parameter parsing
7 years ago
399bca316a
Fix has_value with FASTER_GCODE_PARSER
7 years ago
80d3ded895
Change parser codebits from array to int32_t
7 years ago
053b1371c7
Simplify G-code debug option
7 years ago
608f8b10da
Parser val method parity with 1.1.x
7 years ago
2bea1bda56
Move more strings to PROGMEM
7 years ago
1dcfe193ac
Optimize some serial strings
7 years ago
9644fe1839
Lightly optimize arc length calculation
7 years ago
c9bda932fe
Patch M114 D logical output
7 years ago
e5ca60acf5
Patch G29 no_action for A and Q
7 years ago
3db35ba9be
[2.0.x] Fix change filament for delta machines ( #9295 )
7 years ago
b1cd012aa6
Clean up and document load/unload/pause/resume
7 years ago
9b519864bf
[2.0.x] Relative movements fix ( #9259 )
7 years ago
bfd9728cf4
Serial buffer over run work around for v2.0.0 ( #9236 )
...
* Work around for serial buffer over run
PronterFace sends a lot of M105 commands. During long operations such
as UBL's G29 P1, G29 P2, G29 P4 and G26 this can over run the serial
buffer. This results (very often) in a M1 (actually a M1M105) ending
up in the command queue.
Until we figure out a better way to resolve this issue, this will keep
the UBL commands from experiencing bogus commands at thier completion.
7 years ago
f5f1b069ad
Convert UBL mesh tilting to all use the same algorithm ( #9204 )
...
A number of regressions were patched also. The UBL G29 P2 and P4 Press and Hold had stopped working. It is very possible this is broken in the bugfix_v1.1.x branch also.
The main purpose of the Pull Request is to get the 3-Point mesh tilting to use the LSF algorithm just like the grid based mesh tilt. This simplifies the logic and reduces the code size some what. But the real reason to do it is the 3-Point case can be solved exactly. And by feeding these numbers into the LSF algorithm it provides a way to check all that code for 'correctness'.
7 years ago
d178d6e921
M503 patch for EEPROM_CHITCHAT off
...
Fix #9155
7 years ago
2c18faf3e4
General cleanups for HAL
7 years ago
6a043eee55
Various updates for TMC support
7 years ago
f7efac57b7
Multi-host support
7 years ago
a94104dbb5
Merge pull request #9113 from teemuatlut/TMC_followup
...
[2.0.x]TMC followup
7 years ago
554e577676
SERIAL_STATS_* features not supported on USBCON targets ( #9127 )
7 years ago
9d923c6c03
Fix TMC gcode commands
7 years ago
60d07f20e7
Make mbl.has_mesh() a method
7 years ago
86818c9a89
Move MBL functions into the class
7 years ago
bbb8d4c802
Set has_mesh if user issues G9 S3
...
Prevents user from having to manually run through entire manual leveling process only to enable mesh so they can manually restore their offline mesh backup
7 years ago
cf2922f164
Laser/spindle PWM off on M5
7 years ago
b91ca168fb
Add a struct defining EEPROM storage
7 years ago
51e0f2bee3
Add MarlinSettings::validate()
7 years ago
1c41de16d4
Trailing whitespace clean
7 years ago
1746a7352e
Merge pull request #9042 from thinkyhead/bf2_M701_M702
...
[2.0.x] Improved Pause/Load/Unload, M701-M702
7 years ago
a5dfe08a81
Add precision to planner.xy_skew_factor so it doesn't print as 0.00
7 years ago
4fb60e1562
M702.cpp => M701_M702.cpp
7 years ago
7541316bb4
Add M701/M702 Filament Load/Unload, M603
7 years ago
4af3d436b2
M303 pid autotune cleanup, commentary
7 years ago
fc67c64b8f
Merge pull request #8989 from tcm0116/2.0.x_ubl
...
[2.0.x] Fix UBL compilation warnings
7 years ago
8afc4f8d9d
Fix UBL compilation warnings
7 years ago
adb9ecf3cc
copy of PR #8990
7 years ago
3dd04736c0
Update M17_M18_M84.cpp
7 years ago
6d94bbf618
Apply some PGM_P pointers
7 years ago
427df8792d
Fix Capabilities Report
7 years ago
db32c185ae
Merge pull request #8860 from Bob-the-Kuhn/2.0.x-DUE-RRDFGSC
...
[2.0.x] DUE - update for Reprap Discount Full Graphic Smart Controller
7 years ago
9ecdd1f4c7
Multi extruder support for M600 and LCD
7 years ago
1a827d5b68
Opening brace tweaks
7 years ago
4ef965cc40
Fix compiler warnings
7 years ago
9e8008c49c
Fixes for G29, esp. 3POINT
7 years ago
026e301307
lcd_map_control deps on ULTIPANEL
7 years ago
f2731c9f93
Allow consecutive uses of G29
7 years ago
4b49ea1e92
General cleanup of config-store, reset_bed_level
7 years ago
c6354fa153
Tweak M125 code
7 years ago
f0a8a1a853
[2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE ( #8866 )
...
* Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
7 years ago
c694608450
Apply SCARA_FEEDRATE_SCALING to G2/G3
7 years ago
913d9e9a59
Matching sign across filwidth vars
7 years ago
93a6a4e1a8
Add VOLUMETRIC capability item
7 years ago
933f76fda3
Option to disable all volumetric extrusion
7 years ago
5595098063
V2 Extended NanoDLP_Z_Move_Sync to G4 & G28,Added all axis option.
7 years ago
0cd1e91056
[2.0.x] TMC driver update ( #8769 )
7 years ago
cf2193c07f
Comment, fix filament width sensor
7 years ago
a71d2f3f40
UBL_DELTA => UBL_SEGMENTED
7 years ago
73e32925e4
References are better for array args
7 years ago
125c572d97
Tweak M114 detail
7 years ago
204199e1ce
Only compare XYZ to check motion
7 years ago
117fc872a7
Update current position in M852
7 years ago
7d2e850577
Have M420 report a changed position
7 years ago
03ba79f144
Sync and report changed position
7 years ago
de3d3b9cb1
Put FORCE_INLINE before static
7 years ago
ae663a4198
PROBE_DOUBLE_TOUCH => MULTIPLE_PROBING
7 years ago
99fcf60977
[2.x] addressing #8644
...
Removed missing include file
7 years ago
90cf6a06be
Simplify G26 user_canceled
7 years ago
c846388a65
Standardize LCD interface code for UBL a little
7 years ago
2fde60da12
Changes for parity with 1.1.x
7 years ago
a4e1d83599
Fix M503 S parameter
7 years ago
9e3fbcf35c
fix for #8669 ( #8679 )
...
* fix for #8669
* Update G28.cpp
7 years ago
6e944a413c
Merge pull request #8607 from benlye/patch-1
...
[2.0.x] Fix M49 so that it does not hang the terminal console
7 years ago
f4b16a3bac
Update M49.cpp
7 years ago
4c5ffd2349
[2.0.x] Report SERIAL_XON_XOFF in M115
...
-Report SERIAL_XON_XOFF in Extended Capabilites M115 report for hosts
-Remove outdated 256 size limitation from comments on RX_BUFFER_SIZE defines
-Update error message conditions
7 years ago
046a1ad331
Merge pull request #8625 from tcm0116/2.0.x-G33
...
[2.0.x] Fix missing return values in G33_auto_tune
7 years ago
b35c3b5eb8
Fix missing return values in G33_auto_tune
7 years ago
0154e3480c
New feature: BED_SKEW_CORRECTION
7 years ago
1f3ad461bc
Update M49.cpp
...
Fix M49 so that it does not hang the terminal console.
7 years ago
e37dd64548
Apply LEDColor, language fixes
7 years ago
4793c34c53
Fix M290 boolval bug
...
Fix #8577
7 years ago
0880031e8e
Satisfy M702 dependencies
7 years ago
0786b61ce7
Followup to #8575
7 years ago
276271e72f
Make MBL work more like PROBE_MANUALLY
7 years ago
22b897e77d
Show M211 output with workspace offset
7 years ago
e48fcad615
change G26 and G29 bit function names to avoid HAL collision
7 years ago
41ec449960
Fix G26 error return
7 years ago
d18d40e1d6
M290 report on change, P0 to leave Probe Z Offset alone
7 years ago
65f365333f
[2.0.x] G33 probe error handling
7 years ago
be00e421a7
Patch up M290, M851
7 years ago
b49acce035
Tweaks for lcd_external_control
7 years ago
ab03a31cc9
Patch G0/G1 for NANODLP_Z_SYNC
7 years ago
a766dfb3b1
Merge pull request #8536 from thinkyhead/bf2_nanodlp_z_move_sync
...
[2.0.x] Implement NANODLP_Z_SYNC for 2.0.x
7 years ago
ec04cf27d3
Fix the G26 out of scope identifiers in the v2.0.0 branch ( #8543 )
...
These changes may need to be warmed over. I tried to fix things with
the least amount of disruption. I just wanted to get the bugfix_v2.0.0
branch working for people again.
7 years ago
dc82babe8e
Implement NANODLP_Z_SYNC for 2.0.x
7 years ago
c6b0c104bb
Adapt G26 to work for all meshes
7 years ago
c19eb33408
Move G26 to gcode sub-folder
7 years ago
c613a1ed38
Fix indentation, stepper.h dependency, etc.
7 years ago
3269d8dd62
Tweak M42 var
7 years ago
3066655727
Try port*100+pin, fix config dependency
7 years ago
a28ccabe2a
M42 P1.20 fix
7 years ago
c0000a0cdc
Move servo code to modules/servo.*
7 years ago
c14000775b
PWM fixes, slow down fan update
...
include LPC1768 syntax for M42
couple more pin_t changes
consistency
change M42 to R, P format
Revert "change M42 to R, P format"
This reverts commit 01f12f579ec9ccc1bb9126e68d2c86449e9b7edf.
7 years ago
60adc6ff02
Display filwidth ratio in terms of E mm
7 years ago
485abb023b
Merge pull request #8456 from thinkyhead/bf2_wednesday_tweaks
...
[2.0] No retroactive adjustment with M851 Z
7 years ago
3bba7d60f3
No retroactive changes with M851 Z
...
If using babystep to adjust the Z probe offset, the axis will move and the mesh will be updated at the same time, causing a doubling of the Z offset over the rest of the print.
To correct for this, the current Z position would need to be modified in the opposite direction, canceling out the additional Z offset added to the mesh. This would be confusing to users, and moreover it would not be accurate without also taking the current Z fade level and current Z height into account.
It might make sense to change the mesh in the case where no babystepping is taking place, but this could be considered an undesirable side-effect of changing the `zprobe_zoffset`.
One way to remedy this would be to return to storing the mesh with `zprobe_zoffset` included, then subtracting `zprobe_zoffset` from the returned Z value. Thus, a babystep moving the Z axis up 1mm would subtract 1 from `zprobe_zoffset` while adding 1 to all mesh Z values.
Without including the `zprobe_zoffset` in the `z_values` there is no safe way to alter the mesh in conjunction with babystepping, although it's fine without it.
7 years ago
32512332df
Apply some formatting
7 years ago
50f09cc029
Miscellaneous cleanup
7 years ago
9c3761047e
Merge pull request #8434 from thinkyhead/bf2_fix_M32_subroutines
...
[2.0] Fix 'M32 P' subroutines
7 years ago
e0d367f1fb
Fix M32 P subroutine handling
7 years ago
2c8c30437e
Fix parser parameter value handling
7 years ago
e70b44dc0b
Make sure leveled[] is defined for later use
7 years ago
54774841ba
Merge pull request #8416 from thinkyhead/bf2_M114_DETAIL
...
[2.0] Add M114_DETAIL to Configuration_adv.h
7 years ago
009e3a7aa7
Add M114_DETAIL to Configuration_adv.h
7 years ago
91baca6abb
Patches for compiler warnings/errors
7 years ago
2f73dec077
Apply native workspace fixes for G92, G53-59
7 years ago
Scott Lahteine