bd491818d6
Reduce storage requirements for strings, make some PGM
9 years ago
7b2fadd598
Apply some fixes from Andreas
...
Derived from
https://github.com/AnHardt/Marlin/commit/6e8ede8c694fa4d9e3c769840b09d56
7f8d8e0dd
9 years ago
dcb8ec32ee
Fix compile error with watch_bed_next_ms
9 years ago
ee5be92206
Fix broken DISABLE_HEATER macro
9 years ago
e2d4919c01
Merge pull request #3991 from thinkyhead/rc_axis_units
...
Rename some vars to clarify their relationship to acceleration
9 years ago
72c6f2923f
axis_steps_per_unit => axis_steps_per_mm
9 years ago
3c68be79dc
Throw an error in PID_autotune for E < -1
9 years ago
cd441ce652
SINGLENOZZLE: EXTRUDERS versus HOTENDS
9 years ago
3fd9b331f0
Merge pull request #3924 from thinkyhead/rc_statics_temperature
...
Apply static to Temperature class
9 years ago
78fb02a5ad
Apply static to Temperature class
9 years ago
fad7680605
Slower SPI speed for MAX31855
9 years ago
0c7c45063b
PID_ADD_EXTRUSION_RATE based on MarlinKimbra
9 years ago
8218558953
Update comments, rename next_ping_ms, followup to #3797
9 years ago
58339aea5f
Merge pull request #3769 from jbrazio/bugfix/iteration-invokes-undef-behavior
...
Bugfix: iteration invokes undefined behavior
9 years ago
2f14934c65
Fix checkExtruderAutoFans
...
Make sure to only set the fan state once when extruders share a fan
9 years ago
ecd490ed49
Bugfix: iteration invokes undefined behavior
9 years ago
4d6bb52b26
Don't try to enable unused auto fans
...
Addressing #3743
9 years ago
9b92bb8f31
Set the initial state based on target temperature
9 years ago
6b13c430ae
The TRReset state is not needed with fall-through
9 years ago
c2522ce1f5
Fallthru in thermal runaway test when TRState changes
9 years ago
9186be7b83
Fix compilation error in debugging code
...
Fix compilation error in Thermal Runaway debugging code
9 years ago
084f6b5b44
Temperature singleton class
9 years ago
85e732d5fd
Fix BABYSTEPPING, add it to Travis test
9 years ago
60c6efb75c
Merge pull request #3653 from thinkyhead/rc_bed_temp_watch_merge
...
Introduce temp watch protection for the bed
9 years ago
908229dbb3
Introduce temp watch protection for the bed
...
When setting the bed temp via M140/M190 if the thermistor does not read an increase of WATCH_BED_TEMP_INCREASE degrees by WATCH_BED_TEMP_PERIOD seconds then it will throw "Error:Heating failed, system stopped! Heater_ID: bed" and call the kill() function.
Conflicts:
Marlin/Configuration_adv.h
9 years ago
96f51f400f
Planner singleton class
9 years ago
5e4e535ce8
Stepper and Endstops as singleton objects
9 years ago
3db5a75f30
Merge pull request #3568 from thinkyhead/rc_various_fixes
...
General code cleanup, improved naming, etc.
9 years ago
8a2587f017
Read size for MAX6675 from sizeof(max6675_temp)
9 years ago
ba84d8d091
Allow setting PIDTEMP and PIDTEMPBED together or apart
9 years ago
a26d70e932
Apply indentation to gcode_M303, PID_autotune
9 years ago
ba66336503
Output error for disabled M303
9 years ago
8429ae6beb
Merge pull request #3525 from thinkyhead/rc_fix_pid_params_per_extruder
...
Fix broken PID_PARAMS_PER_EXTRUDER
9 years ago
d4a848c72a
Fix broken PID_PARAMS_PER_EXTRUDER
...
As noted by @FalloutBe in #3519
9 years ago
832e1c1f2a
Follow-up and fix for the PR #3453(ELAPSED / PENDING for rollover-safe time checking)
...
・Add more "UL" suffix
・Restore removed "UL" suffix
9 years ago
c5a8755cc0
Fix a messed up ELAPSED instance
9 years ago
386140f361
Test time difference in safe way
9 years ago
d7cbb2eec9
Merge pull request #3403 from jbrazio/feature/stopwatch
...
Print job timer rework
9 years ago
865dcf3fb4
Fix FILAMENT_WIDTH_SENSOR measurement
...
Only measure and store filament width when E is going forward.
9 years ago
eb61051556
Rework the print job timer to use the stopwatch class
9 years ago
d24f14a799
Add HAS_TEMP_HOTEND define
9 years ago
1a79b13b7a
FILAMENT_SENSOR -> FILAMENT_WIDTH_SENSOR
9 years ago
ab412a2153
PIDTEMPBED on #endif
9 years ago
5955a3063f
Sanity check PIDTEMPBED plus BED_LIMIT_SWITCHING
9 years ago
0da744b7b0
Further cleanup of comments, partial Doxygen-style
...
Following up on #3231
9 years ago
5e5d250832
Added gplv3 header to all Marlin files
9 years ago
04fa9d4f47
Make Autotune options into Menu Edit Items
9 years ago
e3f583a3be
Fixes for PID AutoTune from menu
...
Fixes for #3189
Setting a temp is still missing
9 years ago
3b3e8a02b5
Initial implementation of PID Autotune Menu Items
...
Adds the parameter U to M303. If U1 is included , it will use the
PID-values from the auto-tune.
9 years ago
06332f20be
Merge pull request #3113 from jbrazio/bugfix/3061-stop-print-time-counter
...
Stop print timer with M105/M109
9 years ago
4bbea5124d
Support for multiple PWM fans
9 years ago
2ef49a9d53
Wrap DEFAULT_Ki, DEFAULT_Kd, PID_dT
...
Addition to #3140
9 years ago
1c384930f3
Merge pull request #3140 from thinkyhead/rc_fix_macro_expansion
...
Wrap macros to prevent bad expansions
9 years ago
30c3a21d1f
Merge pull request #3112 from thinkyhead/rc_support_MAX31855
9 years ago
f9ded2a7c4
Wrap macros to prevent bad expansions
9 years ago
a645860431
All print timer related activity now uses print_job_start(), print_job_timer() or print_job_stop()
9 years ago
81aab828e2
Fix a "Heating failed" error
...
Addressing #3085 . If the target_temperature is set directly it never invokes or disables the timer set in `start_watching_heater`, so after _stopping a print_ or turning off _all heaters_ you could get a “Heating failed” error.
9 years ago
27f244ba2c
Support MAX31855 as Temperature Sensor -3
9 years ago
986b508ff7
Print timer now stops when it sees the last extruder temperature being shutdown
9 years ago
ff13070b59
Use _BV macros, patch up others
9 years ago
209f5f21e0
Use macros where possible
...
Apply `constrain`, `NOMORE`, `NOLESS` and `CRITICAL_SECTION` macros
wherever possible.
9 years ago
3a3d358df9
Fix Printrboard with LCD (redo)
...
Based on #2860 - rebased for RCBugFix
9 years ago
0631541166
Fix disable_all_heaters() for MAX6675
9 years ago
57da1b8497
Host parseble output for M109, M190 and M303
...
Make the output of M105 more similar to Repetier.
Make the text-print pert of M105 an extra function to make it reusable. `print_heaterstates()`
Use `print_heaterstates()` in M019, M190 and M303
9 years ago
956418c674
Kc is also a multi-PID parameter
9 years ago
dbd4c17096
Init Kp, Ki, Kd to 0
9 years ago
b4af4441c5
Clean up watchdog impl.
9 years ago
9bdab4f3a8
Clean up "else" and other spacing
9 years ago
25d636c9e0
Compiler issues (PR#2696)
9 years ago
47401ec97b
MSG_EXTRUDER_SWITCHED_OFF was renamed to MSG_REDUNDANCY
...
in language.h, but was not renamed here. If TEMP_SENSOR_1 is enabled as redundant then
an error is thrown that MSG_EXTRUDER_SWITCHED_OFF is not defined.
Originaly by @12dstring
9 years ago
0c7f7ebcfb
Styling adjustments (PR#2668 & PR#2670)
...
Keep "astyled" reformatting
9 years ago
bc50db9cf6
Implement PID_ADD_EXTRUSION_RATE
9 years ago
51e89a269c
Overridable Options - Part 9 (PR#2561)
...
Apply `ENABLED` / `DISABLED` macros to temperature-related files.
10 years ago
d17f7ebc8a
Multiply WATCH_TEMP_PERIOD by 1000UL (PR#2535)
...
instead of 1000. Else we get errors with times over 32 seconds.
10 years ago
e4c01f1c7e
Simplify init with ARRAY_BY_EXTRUDERS1 macro (PR#2507)
10 years ago
77e80ef367
Require extruders for thermal code
10 years ago
3bde4f4855
Require temp sensor for bed thermal protection
10 years ago
7268d46508
Always calculate extruder temperature PID d term (PR#2432)
10 years ago
a274769f4f
Clean up spacing and comments
...
Also clean up some trailing spaces in a few other sources
10 years ago
1d94d098bf
Formatting tweaks as part of fixing issue 1497
10 years ago
e602c28ad9
Set auto fan pins to OUTPUT during init
...
Fixes the problem of these pins being left in INPUT state, as described
in #1497
10 years ago
eb81982fcd
Fix error next command in autotune (PR#2274)
...
Now send only temperature for T or B, but not send OK.
Host interprets the line to show the right temperature, but not in
response to M105 then stop and send commands until it ends the autotune.
10 years ago
b1404a0743
fix thermal protection state machine target temp. V2
...
If the target temperature is changed then it would always stay in the reset state.
Thanks to @tonokip.
Replaces #2119
10 years ago
e86f2342c0
Separate the maximum integral power for the bed from PID_INTEGRAL_DRIVE_MAX / PID_MAX.
...
My PID_INTEGRAL_DRIVE_MAX was at 96, which was insufficient for my bed
to reach its intended temperature. The head requires a low maximum power since
I run on 24 volts and it has a somewhat low thermal mass.
10 years ago
da246f5cb1
Activate BED_MINTEMP error.
...
And call _temp_error() directly for ERR_MAXTEMP_BED to avoid the only one time use of bed_max_temp_error().
Includes #2156 .
10 years ago
959da98d8e
Call kill() only once when triggered by a temperature error
...
to avoid stack overflow when called from interrupt.
Some clean up for calls of disable_all_heaters().
'disable_all_heaters()' is called in kill() and again when 'killed' is already set inside _temp_error().
10 years ago
063881b5bd
Fix a couple of doubled semicolons
10 years ago
00716d0ca0
Small start_watching_heater adjustment
10 years ago
4422365a53
Merge branch 'Development' of https://github.com/MarlinFirmware/Marlin into _temp_error
10 years ago
4113762062
Merge pull request #2130 from AnHardt/kill2
...
Add a string parameter to kill()
10 years ago
120d4c7a8c
Merge remote-tracking branch 'origin/kill2' into _temp_error
10 years ago
cb6e82dc60
Change from kill() to kill(const char *)
...
in temperature.cpp
10 years ago
9d13942278
Use new kill() with parameter.
10 years ago
2990c6c45f
Use new kill_() for _temp_error()
...
instead of stop(). We really want to require a reset and no chance to set a new temperature.
10 years ago
70163dafb9
Use _temp_error() for all errors thrown by different mechanisms
...
Now ending in an endless loop.
Tidy up the output format.
We now get:
ERRORTEXT ", system stopped! Heater_ID: " HEATERID
Where ERRORTEXT can be:
"Heating failed"
"Thermal Runaway"
"MAXTEMP triggered"
"MINTEMP triggered"
and soon
"Thermal Jump"
HEATERID can be
0, 1, 2 ,3 , "bed"
This messages are always followed by the common:
"Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
10 years ago
97ca1b3f4d
Name magic value 20 to MAX_OVERSHOOT_PID_AUTOTUNE
...
to make it better findable.
10 years ago
f65833931d
Formatting tweaks
10 years ago
d693e0f378
Use WATCH_TEMP_INCREASE + TEMP_HYSTERESIS + 1 as difference limit
10 years ago
6697a8f375
Watch the heater a little longer
10 years ago
5693a6e3c9
Fix heating error message
10 years ago
8332a15899
Fix testing of runaway options in temperature.cpp
10 years ago
2445ae3d3a
Combine thermal runaway and watch-period
...
- Make thermal protection for all hotends and/or bed into simple
switches
- Now enable `WATCH_TEMP_PERIOD` when `THERMAL_PROTECTION_HOTENDS` is
enabled
- Move detailed thermal parameters to `Configuration_adv.h`
- Add sanity checks to warn about old configurations
- Change `WATCH_TEMP_PERIOD` to seconds instead of milliseconds
10 years ago
9b3d4380d3
Only watch the heater that was set
10 years ago
28c87ec81b
Disable all heaters on temp error
10 years ago
54deb9eea3
Enable WATCH_TEMP_PERIOD by default
10 years ago
deedb00c18
Document WATCH_TEMP_PERIOD
10 years ago
a120bf3fe4
Latest upstream commits
10 years ago
ae53b3cdc3
Fix the M303 S-1 report text
10 years ago
0fca084ea6
Make EEPROM reproducible in GCode
...
With these changes the output of `M503 S0` is all you need to restore
the EEPROM. Building on this it is straightforward to save and restore
the EEPROM state using the SD card or external GCode file.
- Added `M145` to set “heatup states” for the LCD menu
- Added `M420` to toggle Mesh Bed Leveling
- Added `M421` to set a single Mesh coordinate
- Extended `Config_PrintSettings` with added M codes
- Cleaned up some comments here and there
10 years ago
581685a231
Added new PID autotune info, to make easy copy & paste results to marlin
10 years ago
09d60e0128
Naming and code comments
10 years ago
257a907456
Fix typo in next_bed_check_ms
10 years ago
e4b1e8651b
next_ vars faster than previous_
...
- Change some `previous_` time vars to `next_` so an add only happens
at intervals
- Fix `HEATER_0_USES_MAX6675` polling too frequently, or not at all
10 years ago
ccddc280be
Apply three more commits
10 years ago
27cb90da8b
IsStopped / IsRunning inline
10 years ago
e502144eda
Fixup formatting of last commit
10 years ago
1a5293c2ce
Prevents MINTEMP / MAXTEMP when no heaters present
...
This commit checks whether or not HEATER_0 is in use, and if not, skips
the MIN / MAX temperature checks.
10 years ago
b0f198c153
heater_index above its use
10 years ago
60f8e0386f
More thermal runaway states
10 years ago
f9dbd73652
Fix tr_target_temperature type - float!
10 years ago
a3e129e091
Merge pull request #1801 from thinkyhead/fixup_probing
...
Minor optimizations
10 years ago
a6ba40ae48
Compiling error temperature.cpp with multiple extruders defined
...
It wouldn't compile because of this line in temperature.cpp it turns out
it was just a stray ( that didn't line up with the previous lines so I
just made it in line with the rest and it compiled fine.
10 years ago
fc3c76fc16
Fix #1800
10 years ago
9ba55baa5b
Track target temperature separately for each heater
10 years ago
528e32a1d4
Fix timeout in thermal_runaway when temperature is set higher
10 years ago
b98ebd517e
disable / enable_all_steppers functions
10 years ago
c756b4cf07
Comment tweak
10 years ago
e96df67630
Clarify thermal_runaway_protection
...
- Add comments documenting `thermal_runaway_protection`
- Add an enum for the thermal runaway states
- Add macros for temperature helper functions
- Fix a glitch with the z probe sled in homeaxis
10 years ago
488666832b
Remove the previously introduced ()
10 years ago
3f2e863206
Improve conditions for HAS_TEMP
...
and use them in temperuture.h
Flattened the if structure - the preprocessor is doing the work - not the Arduino. Arduino.
10 years ago
85f8a26ba4
Fix MIN&MAX temperatures again
...
replaced GE0 with th matching GEX in the second row.
added some ()
10 years ago
571652c49b
Fix LCD click
...
- Make the default LCD click sound more pleasant
- Fix warnings about bed temperature runaway
10 years ago
7b2550a604
Times can't be negative.
...
cardreader.cpp needs temperature.h for autotempShutdown() when
AUTOTEMP is defined but warns about unused variables.
Unpublished variables by putting them in to temperature.cpp.
10 years ago
ba871e46bf
Fix compiler warnings
...
- Patched up for most included configurations
10 years ago
df02b992b0
Fix redundant_temperatrure_raw setting
10 years ago
ce485175eb
Give all temp arrays 4 indices
10 years ago
410f64782a
Always 4 temp sensors
10 years ago
ad05a726c1
Merge pull request #1691 from AnHardt/PID_dt
...
Move definition of PIDdT back to temperature.h
10 years ago
f680e509c4
Enclosed error-messages for TEMP_SENSOR_1_AS_REDUNDANT in PSTR()
10 years ago
ac81b4084f
Make variables and function static.
10 years ago
01cc97a3c3
Corected condition for PIDdT
10 years ago
94330705c7
Move definition of PIDdT back to temperature.h
...
make it unconditional
remove all definitions in the 'Configuration.h's
remove form 'Conditionals.h'
10 years ago
dd0067afa6
Fix MAX6675 again and introduce set_current_temp_raw()
...
to make the temperature-code work again with Arduino 1.0.6.
Sorry could not make an extra block on base level.
10 years ago
0d81abe1c9
Merge branch 'Development' into config_testing
...
Latest upstream commits
10 years ago
fc53e43de6
Don't test raw temp for MAX6675
...
- Remove test of raw temp for thermistor 0 when using MAX6675
- Longer `raw_temp_value` array for `TEMP_SENSOR_1_AS_REDUNDANT`
10 years ago
1fac388664
Revert measurement loop
10 years ago
6bdee87be3
Cleanup temperature code
...
- Get rid of unused temp states in the ISR, resulting in more frequent
temperature reading with fewer sensors
- Shrink code slightly in min/max testing
10 years ago
15eb5d35a2
Merge branch 'Development' into config_testing
...
Latest upstream commits
10 years ago
3703694e30
Fix temperature min/max test
...
- Base tests on all thermistors/thermocouples, not just heater 0
10 years ago
63d5d28085
Merge branch 'Development' into config_testing
...
Latest upstream changes
10 years ago
Scott Lahteine